summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-07-16nbd: don't requeue the same request twice.Josef Bacik
We can race with the snd timeout and the per-request timeout and end up requeuing the same request twice. We can't use the send_complete completion to tell if everything is ok because we hold the tx_lock during send, so the timeout stuff will block waiting to mark the socket dead, and we could be marked complete and still requeue. Instead add a flag to the socket so we know whether we've been requeued yet. Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-07-16x86/apm: Don't access __preempt_count with zeroed fsVille Syrjälä
APM_DO_POP_SEGS does not restore fs/gs which were zeroed by APM_DO_ZERO_SEGS. Trying to access __preempt_count with zeroed fs doesn't really work. Move the ibrs call outside the APM_DO_SAVE_SEGS/APM_DO_RESTORE_SEGS invocations so that fs is actually restored before calling preempt_enable(). Fixes the following sort of oopses: [ 0.313581] general protection fault: 0000 [#1] PREEMPT SMP [ 0.313803] Modules linked in: [ 0.314040] CPU: 0 PID: 268 Comm: kapmd Not tainted 4.16.0-rc1-triton-bisect-00090-gdd84441a7971 #19 [ 0.316161] EIP: __apm_bios_call_simple+0xc8/0x170 [ 0.316161] EFLAGS: 00210016 CPU: 0 [ 0.316161] EAX: 00000102 EBX: 00000000 ECX: 00000102 EDX: 00000000 [ 0.316161] ESI: 0000530e EDI: dea95f64 EBP: dea95f18 ESP: dea95ef0 [ 0.316161] DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068 [ 0.316161] CR0: 80050033 CR2: 00000000 CR3: 015d3000 CR4: 000006d0 [ 0.316161] Call Trace: [ 0.316161] ? cpumask_weight.constprop.15+0x20/0x20 [ 0.316161] on_cpu0+0x44/0x70 [ 0.316161] apm+0x54e/0x720 [ 0.316161] ? __switch_to_asm+0x26/0x40 [ 0.316161] ? __schedule+0x17d/0x590 [ 0.316161] kthread+0xc0/0xf0 [ 0.316161] ? proc_apm_show+0x150/0x150 [ 0.316161] ? kthread_create_worker_on_cpu+0x20/0x20 [ 0.316161] ret_from_fork+0x2e/0x38 [ 0.316161] Code: da 8e c2 8e e2 8e ea 57 55 2e ff 1d e0 bb 5d b1 0f 92 c3 5d 5f 07 1f 89 47 0c 90 8d b4 26 00 00 00 00 90 8d b4 26 00 00 00 00 90 <64> ff 0d 84 16 5c b1 74 7f 8b 45 dc 8e e0 8b 45 d8 8e e8 8b 45 [ 0.316161] EIP: __apm_bios_call_simple+0xc8/0x170 SS:ESP: 0068:dea95ef0 [ 0.316161] ---[ end trace 656253db2deaa12c ]--- Fixes: dd84441a7971 ("x86/speculation: Use IBRS if available before calling into firmware") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Cc: David Woodhouse <dwmw@amazon.co.uk> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: x86@kernel.org Cc: David Woodhouse <dwmw@amazon.co.uk> Cc: "H. Peter Anvin" <hpa@zytor.com> Link: https://lkml.kernel.org/r/20180709133534.5963-1-ville.syrjala@linux.intel.com
2018-07-16MIPS: Fix off-by-one in pci_resource_to_user()Paul Burton
The MIPS implementation of pci_resource_to_user() introduced in v3.12 by commit 4c2924b725fb ("MIPS: PCI: Use pci_resource_to_user to map pci memory space properly") incorrectly sets *end to the address of the byte after the resource, rather than the last byte of the resource. This results in userland seeing resources as a byte larger than they actually are, for example a 32 byte BAR will be reported by a tool such as lspci as being 33 bytes in size: Region 2: I/O ports at 1000 [disabled] [size=33] Correct this by subtracting one from the calculated end address, reporting the correct address to userland. Signed-off-by: Paul Burton <paul.burton@mips.com> Reported-by: Rui Wang <rui.wang@windriver.com> Fixes: 4c2924b725fb ("MIPS: PCI: Use pci_resource_to_user to map pci memory space properly") Cc: James Hogan <jhogan@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Wolfgang Grandegger <wg@grandegger.com> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org # v3.12+ Patchwork: https://patchwork.linux-mips.org/patch/19829/
2018-07-16gpu: ipu-csi: Check for field type alternateSteve Longerbeam
When the CSI is receiving from a bt.656 bus, include a check for field type 'alternate' when determining whether to set CSI clock mode to CCIR656_INTERLACED or CCIR656_PROGRESSIVE. Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2018-07-16drm/imx: imx-ldb: check if channel is enabled before printing warningLucas Stach
If the second LVDS channel has been disabled in the DT when using dual-channel mode we should not print a warning. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2018-07-16drm/imx: imx-ldb: disable LDB on driver bindLucas Stach
The LVDS signal integrity is only guaranteed when the correct enable sequence (first IPU DI, then LDB) is used. If the LDB display output was active before the imx-drm driver is loaded (like when a bootsplash was active) the DI will be disabled by the full IPU reset we do when loading the driver. The LDB control registers are not part of the IPU range and thus will remain unchanged. This leads to the LDB still being active when the DI is getting enabled, effectively reversing the required enable sequence. Fix this by also disabling the LDB on driver bind. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2018-07-16ALSA: hda/realtek - Add Panasonic CF-SZ6 headset jack quirkYOKOTA Hiroshi
This adds some required quirk when uses headset or headphone on Panasonic CF-SZ6. Signed-off-by: YOKOTA Hiroshi <yokota.hgml@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-07-16ALSA: hda: add mute led support for HP ProBook 455 G5Po-Hsu Lin
Audio mute led does not work on HP ProBook 455 G5, this can be fixed by using CXT_FIXUP_MUTE_LED_GPIO to support it. BugLink: https://bugs.launchpad.net/bugs/1781763 Reported-by: James Buren Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-07-16of: overlay: update phandle cache on overlay apply and removeFrank Rowand
A comment in the review of the patch adding the phandle cache said that the cache would have to be updated when modules are applied and removed. This patch implements the cache updates. Fixes: 0b3ce78e90fc ("of: cache phandle nodes to reduce cost of of_find_node_by_phandle()") Reported-by: Alan Tull <atull@kernel.org> Suggested-by: Alan Tull <atull@kernel.org> Signed-off-by: Frank Rowand <frank.rowand@sony.com> Signed-off-by: Rob Herring <robh@kernel.org>
2018-07-16Input: elan_i2c - add another ACPI ID for Lenovo Ideapad 330-15ASTKT Liao
Add ELAN0622 to ACPI mapping table to support Elan touchpad found in Ideapad 330-15AST. Signed-off-by: KT Liao <kt.liao@emc.com.tw> Reported-by: Anant Shende <anantshende@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-07-16Merge tag 'phy-for-4.18-rc' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-linus Kishon writes: phy: for 4.18-rc *) Fix to get xhci working after disable<->enable cycle *) Fix wrong enum used for status lines (also fixes a compilation warning). Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-07-16staging: android: ashmem: Shrink directly through shmem_fallocateTobias Lindskog
When ashmem_shrink is called from direct reclaim on a user thread, a call to do_fallocate will check for permissions against the security policy of that user thread. It can thus fail by chance if called on a thread that isn't permitted to modify the relevant ashmem areas. Because we know that we have a shmem file underneath, call the shmem implementation of fallocate directly instead of going through the user-space interface for fallocate. Signed-off-by: Tobias Lindskog <tobias.lindskog@sonymobile.com> Signed-off-by: Jeff Vander Stoep <jeffv@google.com> Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-16staging: fbtft: Fix line continuationMatthias Wolf
Fix checkpatch warning: avoid unnecessary line continuation to allow grepping of whole error message. Signed-off-by: Matthias Wolf <der_wolf_@web.de> Signed-off-by: Felix Siegel <felix.siegel@stud.uni-hannover.de> Signed-off-by: Tim Cofala <cofala@stud.uni-hannover.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-16staging: fbtft: Fix line over 80 charactersMatthias Wolf
Fix checkpatch line over 80 characters where it seemed appropriate Signed-off-by: Matthias Wolf <der_wolf_@web.de> Signed-off-by: Felix Siegel <felix.siegel@stud.uni-hannover.de> Signed-off-by: Tim Cofala <cofala@stud.uni-hannover.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-16staging: comedi: comedi_fops: Shift assignment operator '=' to previous lineNishad Kamdar
Shift '=' assignment operator to the end of previous line to conform to preferred kernel style line wrapping. Issue reported by checkpatch CHECK. Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-16staging: rtl8188eu: remove redundant header fileMichael Straube
Both functions declared in rtl8188e_led.h are also declared in rtw_led.h which is included from drv_types.h. Remove rtl8188e_led.h and it's includes. Signed-off-by: Michael Straube <straube.linux@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-16staging: rtl8188eu: add spaces around '+'Michael Straube
Add spaces around '+' to follow kernel coding style. Signed-off-by: Michael Straube <straube.linux@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-16staging: rtl8188eu: rename variableMichael Straube
Rename variable to avoid CamelCase. tmpV16 -> tmpv16 Signed-off-by: Michael Straube <straube.linux@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-16staging: rtl8188eu: rename function parametersMichael Straube
Rename function parameters to avoid CamelCase. bWrite -> write PwrState -> pwrstate Signed-off-by: Michael Straube <straube.linux@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-16staging: rtl8188eu: rename Efuse_PowerSwitchMichael Straube
Rename function to avoid CamelCase. Efuse_PowerSwitch -> efuse_power_switch Signed-off-by: Michael Straube <straube.linux@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-16staging: rtl8188eu: do not line break function definitionMichael Straube
Do not line break function definition of Efuse_PowerSwitch(). Signed-off-by: Michael Straube <straube.linux@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-16staging: mt7621: Add SPDX license identifierOliver Hübers
Signed-off-by: Oliver Hübers <oliver.huebers@web.de> Signed-off-by: Vanessa Borgmann <nessa.x@web.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-16staging: rtl8188eu: remove is_{multicast,broadcast}_mac_addrMichael Straube
Remove custom is_multicast_mac_addr() and is_broadcast_mac_addr(). Use is_multicast_ether_addr() instead. By definition the broadcast address is also a multicast address. is_multicast_ether_addr() returns true for broadcast addresses. Hence checking for multicast in the conditional is sufficient. Signed-off-by: Michael Straube <straube.linux@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-16staging: mt7621-pci: Include preferred headersOliver Hübers
This fixes the following checkpatch warnings: Use #include <linux/pci.h> instead of <asm/pci.h> Use #include <linux/io.h> instead of <asm/io.h> Signed-off-by: Oliver Hübers <oliver.huebers@web.de> Signed-off-by: Vanessa Borgmann <nessa.x@web.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-16staging: olpc_dcon: add missing identifier namesCristian Kubis
Add missing function argument identifier names as suggested by checkpatch.pl. Signed-off-by: Cristian Kubis <cristian.kubis@tsunix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-16staging: olpc_dcon: prefer 'help' in KConfigCristian Kubis
Fix for a style warning reported by checkpatch.pl in KConfig suggesting to use 'help' instead of '---help---'. Signed-off-by: Cristian Kubis <cristian.kubis@tsunix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-16staging:r8188eu: Use lib80211 to encrypt (CCMP) tx framesIvan Safonov
Put data to skb, decrypt with lib80211_crypt_ccmp, and place back to tx buffer. Signed-off-by: Ivan Safonov <insafonov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-16staging:r8188eu: Use lib80211 to encrypt (TKIP) tx framesIvan Safonov
Put data to skb, decrypt with lib80211_crypt_tkip, and place back to tx buffer. MIC calculation will be replaced later. Signed-off-by: Ivan Safonov <insafonov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-16staging: speakup: fix wraparound in uaccess length checkSamuel Thibault
If softsynthx_read() is called with `count < 3`, `count - 3` wraps, causing the loop to copy as much data as available to the provided buffer. If softsynthx_read() is invoked through sys_splice(), this causes an unbounded kernel write; but even when userspace just reads from it normally, a small size could cause userspace crashes. Fixes: 425e586cf95b ("speakup: add unicode variant of /dev/softsynth") Cc: stable@vger.kernel.org Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-16staging: ks7010: call 'hostif_mib_set_request_int' instead of ↵Sergio Paracuellos
'hostif_mib_set_request_bool' 'hostif_mib_set_request_bool' function receives a bool as value and send the received value with MIB_VALUE_TYPE_BOOL type. There is one case where the value passed is not a boolean one but 'MCAST_FILTER_PROMISC' which is '2'. Call hostif_mib_set_request_int instead for related multicast enumeration. This changes original code behaviour but seems to be the right way to do this. Fixes: 8ce76bff0e6a ("staging: ks7010: add new helpers to achieve mib set request and simplify code") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-16Revert "staging:r8188eu: Use lib80211 to support TKIP"Hans de Goede
Commit b83b8b1881c4 ("staging:r8188eu: Use lib80211 to support TKIP") is causing 2 problems for me: 1) One boot the wifi on a laptop with a r8188eu wifi device would not connect and dmesg contained an oops about scheduling while atomic pointing to the tkip code. This went away after reverting the commit. 2) I reverted the revert to try and get the oops from 1. again to be able to add it to this commit message. But now the system did connect to the wifi only to print a whole bunch of oopses, followed by a hardfreeze a few seconds later. Subsequent reboots also all lead to scenario 2. Until I reverted the commit again. Revert the commit fixes both issues making the laptop usable again. Fixes: b83b8b1881c4 ("staging:r8188eu: Use lib80211 to support TKIP") Cc: stable@vger.kernel.org Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ivan Safonov <insafonov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-16drm/nouveau: Set DRIVER_ATOMIC cap earlier to fix debugfsLyude Paul
Currently nouveau doesn't actually expose the state debugfs file that's usually provided for any modesetting driver that supports atomic, even if nouveau is loaded with atomic=1. This is due to the fact that the standard debugfs files that DRM creates for atomic drivers is called when drm_get_pci_dev() is called from nouveau_drm.c. This happens well before we've initialized the display core, which is currently responsible for setting the DRIVER_ATOMIC cap. So, move the atomic option into nouveau_drm.c and just add the DRIVER_ATOMIC cap whenever it's enabled on the kernel commandline. This shouldn't cause any actual issues, as the atomic ioctl will still fail as expected even if the display core doesn't disable it until later in the init sequence. This also provides the added benefit of being able to use the state debugfs file to check the current display state even if clients aren't allowed to modify it through anything other than the legacy ioctls. Additionally, disable the DRIVER_ATOMIC cap in nv04's display core, as this was already disabled there previously. Signed-off-by: Lyude Paul <lyude@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2018-07-16drm/nouveau: Remove bogus crtc check in pmops_runtime_idleLyude Paul
This both uses the legacy modesetting structures in a racy manner, and additionally also doesn't even check the right variable (enabled != the CRTC is actually turned on for atomic). This fixes issues on my P50 regarding the dedicated GPU not entering runtime suspend. Signed-off-by: Lyude Paul <lyude@redhat.com> Cc: stable@vger.kernel.org Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2018-07-16drm/nouveau/drm/nouveau: Fix runtime PM leak in nv50_disp_atomic_commit()Lyude Paul
A CRTC being enabled doesn't mean it's on! It doesn't even necessarily mean it's being used. This fixes runtime PM leaks on the P50 I've got next to me. Signed-off-by: Lyude Paul <lyude@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2018-07-16drm/nouveau: Avoid looping through fake MST connectorsLyude Paul
When MST and atomic were introduced to nouveau, another structure that could contain a drm_connector embedded within it was introduced; struct nv50_mstc. This meant that we no longer would be able to simply loop through our connector list and assume that nouveau_connector() would return a proper pointer for each connector, since the assertion that all connectors coming from nouveau have a full nouveau_connector struct became invalid. Unfortunately, none of the actual code that looped through connectors ever got updated, which means that we've been causing invalid memory accesses for quite a while now. An example that was caught by KASAN: [ 201.038698] ================================================================== [ 201.038792] BUG: KASAN: slab-out-of-bounds in nvif_notify_get+0x190/0x1a0 [nouveau] [ 201.038797] Read of size 4 at addr ffff88076738c650 by task kworker/0:3/718 [ 201.038800] [ 201.038822] CPU: 0 PID: 718 Comm: kworker/0:3 Tainted: G O 4.18.0-rc4Lyude-Test+ #1 [ 201.038825] Hardware name: LENOVO 20EQS64N0B/20EQS64N0B, BIOS N1EET78W (1.51 ) 05/18/2018 [ 201.038882] Workqueue: events nouveau_display_hpd_work [nouveau] [ 201.038887] Call Trace: [ 201.038894] dump_stack+0xa4/0xfd [ 201.038900] print_address_description+0x71/0x239 [ 201.038929] ? nvif_notify_get+0x190/0x1a0 [nouveau] [ 201.038935] kasan_report.cold.6+0x242/0x2fe [ 201.038942] __asan_report_load4_noabort+0x19/0x20 [ 201.038970] nvif_notify_get+0x190/0x1a0 [nouveau] [ 201.038998] ? nvif_notify_put+0x1f0/0x1f0 [nouveau] [ 201.039003] ? kmsg_dump_rewind_nolock+0xe4/0xe4 [ 201.039049] nouveau_display_init.cold.12+0x34/0x39 [nouveau] [ 201.039089] ? nouveau_user_framebuffer_create+0x120/0x120 [nouveau] [ 201.039133] nouveau_display_resume+0x5c0/0x810 [nouveau] [ 201.039173] ? nvkm_client_ioctl+0x20/0x20 [nouveau] [ 201.039215] nouveau_do_resume+0x19f/0x570 [nouveau] [ 201.039256] nouveau_pmops_runtime_resume+0xd8/0x2a0 [nouveau] [ 201.039264] pci_pm_runtime_resume+0x130/0x250 [ 201.039269] ? pci_restore_standard_config+0x70/0x70 [ 201.039275] __rpm_callback+0x1f2/0x5d0 [ 201.039279] ? rpm_resume+0x560/0x18a0 [ 201.039283] ? pci_restore_standard_config+0x70/0x70 [ 201.039287] ? pci_restore_standard_config+0x70/0x70 [ 201.039291] ? pci_restore_standard_config+0x70/0x70 [ 201.039296] rpm_callback+0x175/0x210 [ 201.039300] ? pci_restore_standard_config+0x70/0x70 [ 201.039305] rpm_resume+0xcc3/0x18a0 [ 201.039312] ? rpm_callback+0x210/0x210 [ 201.039317] ? __pm_runtime_resume+0x9e/0x100 [ 201.039322] ? kasan_check_write+0x14/0x20 [ 201.039326] ? do_raw_spin_lock+0xc2/0x1c0 [ 201.039333] __pm_runtime_resume+0xac/0x100 [ 201.039374] nouveau_display_hpd_work+0x67/0x1f0 [nouveau] [ 201.039380] process_one_work+0x7a0/0x14d0 [ 201.039388] ? cancel_delayed_work_sync+0x20/0x20 [ 201.039392] ? lock_acquire+0x113/0x310 [ 201.039398] ? kasan_check_write+0x14/0x20 [ 201.039402] ? do_raw_spin_lock+0xc2/0x1c0 [ 201.039409] worker_thread+0x86/0xb50 [ 201.039418] kthread+0x2e9/0x3a0 [ 201.039422] ? process_one_work+0x14d0/0x14d0 [ 201.039426] ? kthread_create_worker_on_cpu+0xc0/0xc0 [ 201.039431] ret_from_fork+0x3a/0x50 [ 201.039441] [ 201.039444] Allocated by task 79: [ 201.039449] save_stack+0x43/0xd0 [ 201.039452] kasan_kmalloc+0xc4/0xe0 [ 201.039456] kmem_cache_alloc_trace+0x10a/0x260 [ 201.039494] nv50_mstm_add_connector+0x9a/0x340 [nouveau] [ 201.039504] drm_dp_add_port+0xff5/0x1fc0 [drm_kms_helper] [ 201.039511] drm_dp_send_link_address+0x4a7/0x740 [drm_kms_helper] [ 201.039518] drm_dp_check_and_send_link_address+0x1a7/0x210 [drm_kms_helper] [ 201.039525] drm_dp_mst_link_probe_work+0x71/0xb0 [drm_kms_helper] [ 201.039529] process_one_work+0x7a0/0x14d0 [ 201.039533] worker_thread+0x86/0xb50 [ 201.039537] kthread+0x2e9/0x3a0 [ 201.039541] ret_from_fork+0x3a/0x50 [ 201.039543] [ 201.039546] Freed by task 0: [ 201.039549] (stack is not available) [ 201.039551] [ 201.039555] The buggy address belongs to the object at ffff88076738c1a8 which belongs to the cache kmalloc-2048 of size 2048 [ 201.039559] The buggy address is located 1192 bytes inside of 2048-byte region [ffff88076738c1a8, ffff88076738c9a8) [ 201.039563] The buggy address belongs to the page: [ 201.039567] page:ffffea001d9ce200 count:1 mapcount:0 mapping:ffff88084000d0c0 index:0x0 compound_mapcount: 0 [ 201.039573] flags: 0x8000000000008100(slab|head) [ 201.039578] raw: 8000000000008100 ffffea001da3be08 ffffea001da25a08 ffff88084000d0c0 [ 201.039582] raw: 0000000000000000 00000000000d000d 00000001ffffffff 0000000000000000 [ 201.039585] page dumped because: kasan: bad access detected [ 201.039588] [ 201.039591] Memory state around the buggy address: [ 201.039594] ffff88076738c500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 201.039598] ffff88076738c580: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 201.039601] >ffff88076738c600: 00 00 00 00 00 00 00 00 00 00 fc fc fc fc fc fc [ 201.039604] ^ [ 201.039607] ffff88076738c680: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 201.039611] ffff88076738c700: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 201.039613] ================================================================== Signed-off-by: Lyude Paul <lyude@redhat.com> Cc: stable@vger.kernel.org Cc: Karol Herbst <karolherbst@gmail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2018-07-16drm/nouveau: Use drm_connector_list_iter_* for iterating connectorsLyude Paul
Every codepath in nouveau that loops through the connector list currently does so using the old method, which is prone to race conditions from MST connectors being created and destroyed. This has been causing a multitude of problems, including memory corruption from trying to access connectors that have already been freed! Signed-off-by: Lyude Paul <lyude@redhat.com> Cc: stable@vger.kernel.org Cc: Karol Herbst <karolherbst@gmail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2018-07-16drm/nouveau/gem: off by one bugs in nouveau_gem_pushbuf_reloc_apply()Dan Carpenter
The bo array has req->nr_buffers elements so the > should be >= so we don't read beyond the end of the array. Fixes: a1606a9596e5 ("drm/nouveau: new gem pushbuf interface, bump to 0.0.16") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2018-07-16drm/nouveau/kms/nv50-: ensure window updates are submitted when flushing mst ↵Ben Skeggs
disables It was possible for this to be skipped when shutting down MST streams, and leaving the core channel interlocked with a wndw channel update that never happens - leading to a hung display. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Tested-By: Lyude Paul <lyude@redhat.com>
2018-07-16usb: cdc_acm: Add quirk for Castles VEGA3000Lubomir Rintel
The device (a POS terminal) implements CDC ACM, but has not union descriptor. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Acked-by: Oliver Neukum <oneukum@suse.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-16Merge tag 'usb-ci-v4.18-rc4' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb into usb-linus Peter writes: One regression fix causes imx51 board hang when using ULPI PHY
2018-07-16Merge 4.18-rc5 into staging-nextGreg Kroah-Hartman
We need the staging fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-16Merge tag 'drm-intel-fixes-2018-07-12' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes I already pulled the first fix, pull the GVT fixes. - GVT fix for KBL vGPU hang to update virtual register from LRI. Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180713070922.GA19840@intel.com
2018-07-16Merge branch 'drm-armada-fixes' of git://git.armlinux.org.uk/~rmk/linux-arm ↵Dave Airlie
into drm-fixes Two armada fixes. Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180713075427.GA16160@rmk-PC.armlinux.org.uk
2018-07-16Merge tag 'drm-misc-fixes-2018-07-13' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes Fixes for v4.18-rc5: - Single fix for a build error when the driver is builtin, but the backend is a loadable module. Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/9c596cf5-3f24-070e-74f2-c59bfbaf68fa@linux.intel.com
2018-07-16Merge tag 'drm/tegra/for-4.18-rc5' of ↵Dave Airlie
git://anongit.freedesktop.org/tegra/linux into drm-fixes drm/tegra: Fixes for v4.18-rc5 This contains a couple of one- or two-line fixes for various minor issues in the Tegra driver. Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180712070142.15571-1-thierry.reding@gmail.com
2018-07-16Merge branch 'drm-fixes-4.18' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-fixes A few display and GPUVM fixes for 4.18. A few more fixes for 4.18. Two display fixes and a fix to avoid a segfault if the GPU does not power up properly on resume. These are on top of my pull from earlier this week. Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180712043820.2877-1-alexander.deucher@amd.com
2018-07-16Merge tag 'drm-intel-fixes-2018-07-10' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - Fix hotplug irq ack on i965/g4x (Ville) Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180710213249.GA16479@intel.com
2018-07-16x86/asm/memcpy_mcsafe: Fix copy_to_user_mcsafe() exception handlingDan Williams
All copy_to_user() implementations need to be prepared to handle faults accessing userspace. The __memcpy_mcsafe() implementation handles both mmu-faults on the user destination and machine-check-exceptions on the source buffer. However, the memcpy_mcsafe() wrapper may silently fallback to memcpy() depending on build options and cpu-capabilities. Force copy_to_user_mcsafe() to always use __memcpy_mcsafe() when available, and otherwise disable all of the copy_to_user_mcsafe() infrastructure when __memcpy_mcsafe() is not available, i.e. CONFIG_X86_MCE=n. This fixes crashes of the form: run fstests generic/323 at 2018-07-02 12:46:23 BUG: unable to handle kernel paging request at 00007f0d50001000 RIP: 0010:__memcpy+0x12/0x20 [..] Call Trace: copyout_mcsafe+0x3a/0x50 _copy_to_iter_mcsafe+0xa1/0x4a0 ? dax_alive+0x30/0x50 dax_iomap_actor+0x1f9/0x280 ? dax_iomap_rw+0x100/0x100 iomap_apply+0xba/0x130 ? dax_iomap_rw+0x100/0x100 dax_iomap_rw+0x95/0x100 ? dax_iomap_rw+0x100/0x100 xfs_file_dax_read+0x7b/0x1d0 [xfs] xfs_file_read_iter+0xa7/0xc0 [xfs] aio_read+0x11c/0x1a0 Reported-by: Ross Zwisler <ross.zwisler@linux.intel.com> Tested-by: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Fixes: 8780356ef630 ("x86/asm/memcpy_mcsafe: Define copy_to_iter_mcsafe()") Link: http://lkml.kernel.org/r/153108277790.37979.1486841789275803399.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-07-16lib/iov_iter: Fix pipe handling in _copy_to_iter_mcsafe()Dan Williams
By mistake the ITER_PIPE early-exit / warning from copy_from_iter() was cargo-culted in _copy_to_iter_mcsafe() rather than a machine-check-safe version of copy_to_iter_pipe(). Implement copy_pipe_to_iter_mcsafe() being careful to return the indication of short copies due to a CPU exception. Without this regression-fix all splice reads to dax-mode files fail. Reported-by: Ross Zwisler <ross.zwisler@linux.intel.com> Tested-by: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Acked-by: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Fixes: 8780356ef630 ("x86/asm/memcpy_mcsafe: Define copy_to_iter_mcsafe()") Link: http://lkml.kernel.org/r/153108277278.37979.3327916996902264102.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-07-16lib/iov_iter: Document _copy_to_iter_flushcache()Dan Williams
Add some theory of operation documentation to _copy_to_iter_flushcache(). Reported-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Link: http://lkml.kernel.org/r/153108276767.37979.9462477994086841699.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-13 09:27:43 +0000