summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2025-06-25ata: ahci: Use correct DMI identifier for ASUSPRO-D840SA LPM quirkNiklas Cassel
ASUS store the board name in DMI_PRODUCT_NAME rather than DMI_PRODUCT_VERSION. (Apparently it is only Lenovo that stores the model-name in DMI_PRODUCT_VERSION.) Use the correct DMI identifier, DMI_PRODUCT_NAME, to match the ASUSPRO-D840SA board, such that the quirk actually gets applied. Cc: stable@vger.kernel.org Reported-by: Andy Yang <andyybtc79@gmail.com> Tested-by: Andy Yang <andyybtc79@gmail.com> Closes: https://lore.kernel.org/linux-ide/aFb3wXAwJSSJUB7o@ryzen/ Fixes: b5acc3628898 ("ata: ahci: Disallow LPM for ASUSPRO-D840SA motherboard") Reviewed-by: Hans de Goede <hansg@kernel.org> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Link: https://lore.kernel.org/r/20250624074029.963028-2-cassel@kernel.org Signed-off-by: Niklas Cassel <cassel@kernel.org>
2025-06-25mtk-sd: reset host->mrq on prepare_data() errorSergey Senozhatsky
Do not leave host with dangling ->mrq pointer if we hit the msdc_prepare_data() error out path. Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org> Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Fixes: f5de469990f1 ("mtk-sd: Prevent memory corruption from DMA map failure") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20250625052106.584905-1-senozhatsky@chromium.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2025-06-25Merge tag 'iwlwifi-fixes-2025-06-25' of ↵Johannes Berg
https://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next Miri Korenblit says: ==================== iwlwifi-fixes: fix failure in interface up ==================== Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-06-25RDMA/mlx5: Fix vport loopback for MPV devicePatrisious Haddad
Always enable vport loopback for both MPV devices on driver start. Previously in some cases related to MPV RoCE, packets weren't correctly executing loopback check at vport in FW, since it was disabled. Due to complexity of identifying such cases for MPV always enable vport loopback for both GVMIs when binding the slave to the master port. Fixes: 0042f9e458a5 ("RDMA/mlx5: Enable vport loopback when user context or QP mandate") Signed-off-by: Patrisious Haddad <phaddad@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Link: https://patch.msgid.link/d4298f5ebb2197459e9e7221c51ecd6a34699847.1750064969.git.leon@kernel.org Signed-off-by: Leon Romanovsky <leon@kernel.org>
2025-06-25RDMA/mlx5: Fix CC counters query for MPVPatrisious Haddad
In case, CC counters are querying for the second port use the correct core device for the query instead of always using the master core device. Fixes: aac4492ef23a ("IB/mlx5: Update counter implementation for dual port RoCE") Signed-off-by: Patrisious Haddad <phaddad@nvidia.com> Reviewed-by: Michael Guralnik <michaelgur@nvidia.com> Link: https://patch.msgid.link/9cace74dcf106116118bebfa9146d40d4166c6b0.1750064969.git.leon@kernel.org Signed-off-by: Leon Romanovsky <leon@kernel.org>
2025-06-25RDMA/mlx5: Fix HW counters query for non-representor devicesPatrisious Haddad
To get the device HW counters, a non-representor switchdev device should use the mlx5_ib_query_q_counters() function and query all of the available counters. While a representor device in switchdev mode should use the mlx5_ib_query_q_counters_vport() function and query only the Q_Counters without the PPCNT counters and congestion control counters, since they aren't relevant for a representor device. Currently a non-representor switchdev device skips querying the PPCNT counters and congestion control counters, leaving them unupdated. Fix that by properly querying those counters for non-representor devices. Fixes: d22467a71ebe ("RDMA/mlx5: Expand switchdev Q-counters to expose representor statistics") Signed-off-by: Patrisious Haddad <phaddad@nvidia.com> Reviewed-by: Maher Sanalla <msanalla@nvidia.com> Link: https://patch.msgid.link/56bf8af4ca8c58e3fb9f7e47b1dca2009eeeed81.1750064969.git.leon@kernel.org Signed-off-by: Leon Romanovsky <leon@kernel.org>
2025-06-25IB/core: Annotate umem_mutex acquisition under fs_reclaim for lockdepOr Har-Toov
Following the fix in the previous commit ("IB/mlx5: Fix potential deadlock in MR deregistration"), teach lockdep explicitly about the locking order between fs_reclaim and umem_mutex. The previous commit resolved a potential deadlock scenario where kzalloc(GFP_KERNEL) was called while holding umem_mutex, which could lead to reclaim and eventually invoke the MMU notifier (mlx5_ib_invalidate_range()), causing a recursive acquisition of umem_mutex. To prevent such issues from reoccurring unnoticed in future code changes, add a lockdep annotation in ib_init_umem_odp() that simulates taking umem_mutex inside a reclaim context. This makes lockdep aware of this locking dependency and ensures that future violations—such as calling kzalloc() or any memory allocator that may enter reclaim while holding umem_mutex—will immediately raise a lockdep warning. Signed-off-by: Or Har-Toov <ohartoov@nvidia.com> Reviewed-by: Michael Guralnik <michaelgur@nvidia.com> Link: https://patch.msgid.link/9d31b9d8fe1db648a9f47cec3df6b8463319dee5.1750061698.git.leon@kernel.org Signed-off-by: Leon Romanovsky <leon@kernel.org>
2025-06-25IB/mlx5: Fix potential deadlock in MR deregistrationOr Har-Toov
The issue arises when kzalloc() is invoked while holding umem_mutex or any other lock acquired under umem_mutex. This is problematic because kzalloc() can trigger fs_reclaim_aqcuire(), which may, in turn, invoke mmu_notifier_invalidate_range_start(). This function can lead to mlx5_ib_invalidate_range(), which attempts to acquire umem_mutex again, resulting in a deadlock. The problematic flow: CPU0 | CPU1 ---------------------------------------|------------------------------------------------ mlx5_ib_dereg_mr() | → revoke_mr() | → mutex_lock(&umem_odp->umem_mutex) | | mlx5_mkey_cache_init() | → mutex_lock(&dev->cache.rb_lock) | → mlx5r_cache_create_ent_locked() | → kzalloc(GFP_KERNEL) | → fs_reclaim() | → mmu_notifier_invalidate_range_start() | → mlx5_ib_invalidate_range() | → mutex_lock(&umem_odp->umem_mutex) → cache_ent_find_and_store() | → mutex_lock(&dev->cache.rb_lock) | Additionally, when kzalloc() is called from within cache_ent_find_and_store(), we encounter the same deadlock due to re-acquisition of umem_mutex. Solve by releasing umem_mutex in dereg_mr() after umr_revoke_mr() and before acquiring rb_lock. This ensures that we don't hold umem_mutex while performing memory allocations that could trigger the reclaim path. This change prevents the deadlock by ensuring proper lock ordering and avoiding holding locks during memory allocation operations that could trigger the reclaim path. The following lockdep warning demonstrates the deadlock: python3/20557 is trying to acquire lock: ffff888387542128 (&umem_odp->umem_mutex){+.+.}-{4:4}, at: mlx5_ib_invalidate_range+0x5b/0x550 [mlx5_ib] but task is already holding lock: ffffffff82f6b840 (mmu_notifier_invalidate_range_start){+.+.}-{0:0}, at: unmap_vmas+0x7b/0x1a0 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #3 (mmu_notifier_invalidate_range_start){+.+.}-{0:0}: fs_reclaim_acquire+0x60/0xd0 mem_cgroup_css_alloc+0x6f/0x9b0 cgroup_init_subsys+0xa4/0x240 cgroup_init+0x1c8/0x510 start_kernel+0x747/0x760 x86_64_start_reservations+0x25/0x30 x86_64_start_kernel+0x73/0x80 common_startup_64+0x129/0x138 -> #2 (fs_reclaim){+.+.}-{0:0}: fs_reclaim_acquire+0x91/0xd0 __kmalloc_cache_noprof+0x4d/0x4c0 mlx5r_cache_create_ent_locked+0x75/0x620 [mlx5_ib] mlx5_mkey_cache_init+0x186/0x360 [mlx5_ib] mlx5_ib_stage_post_ib_reg_umr_init+0x3c/0x60 [mlx5_ib] __mlx5_ib_add+0x4b/0x190 [mlx5_ib] mlx5r_probe+0xd9/0x320 [mlx5_ib] auxiliary_bus_probe+0x42/0x70 really_probe+0xdb/0x360 __driver_probe_device+0x8f/0x130 driver_probe_device+0x1f/0xb0 __driver_attach+0xd4/0x1f0 bus_for_each_dev+0x79/0xd0 bus_add_driver+0xf0/0x200 driver_register+0x6e/0xc0 __auxiliary_driver_register+0x6a/0xc0 do_one_initcall+0x5e/0x390 do_init_module+0x88/0x240 init_module_from_file+0x85/0xc0 idempotent_init_module+0x104/0x300 __x64_sys_finit_module+0x68/0xc0 do_syscall_64+0x6d/0x140 entry_SYSCALL_64_after_hwframe+0x4b/0x53 -> #1 (&dev->cache.rb_lock){+.+.}-{4:4}: __mutex_lock+0x98/0xf10 __mlx5_ib_dereg_mr+0x6f2/0x890 [mlx5_ib] mlx5_ib_dereg_mr+0x21/0x110 [mlx5_ib] ib_dereg_mr_user+0x85/0x1f0 [ib_core] uverbs_free_mr+0x19/0x30 [ib_uverbs] destroy_hw_idr_uobject+0x21/0x80 [ib_uverbs] uverbs_destroy_uobject+0x60/0x3d0 [ib_uverbs] uobj_destroy+0x57/0xa0 [ib_uverbs] ib_uverbs_cmd_verbs+0x4d5/0x1210 [ib_uverbs] ib_uverbs_ioctl+0x129/0x230 [ib_uverbs] __x64_sys_ioctl+0x596/0xaa0 do_syscall_64+0x6d/0x140 entry_SYSCALL_64_after_hwframe+0x4b/0x53 -> #0 (&umem_odp->umem_mutex){+.+.}-{4:4}: __lock_acquire+0x1826/0x2f00 lock_acquire+0xd3/0x2e0 __mutex_lock+0x98/0xf10 mlx5_ib_invalidate_range+0x5b/0x550 [mlx5_ib] __mmu_notifier_invalidate_range_start+0x18e/0x1f0 unmap_vmas+0x182/0x1a0 exit_mmap+0xf3/0x4a0 mmput+0x3a/0x100 do_exit+0x2b9/0xa90 do_group_exit+0x32/0xa0 get_signal+0xc32/0xcb0 arch_do_signal_or_restart+0x29/0x1d0 syscall_exit_to_user_mode+0x105/0x1d0 do_syscall_64+0x79/0x140 entry_SYSCALL_64_after_hwframe+0x4b/0x53 Chain exists of: &dev->cache.rb_lock --> mmu_notifier_invalidate_range_start --> &umem_odp->umem_mutex Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&umem_odp->umem_mutex); lock(mmu_notifier_invalidate_range_start); lock(&umem_odp->umem_mutex); lock(&dev->cache.rb_lock); *** DEADLOCK *** Fixes: abb604a1a9c8 ("RDMA/mlx5: Fix a race for an ODP MR which leads to CQE with error") Signed-off-by: Or Har-Toov <ohartoov@nvidia.com> Reviewed-by: Michael Guralnik <michaelgur@nvidia.com> Link: https://patch.msgid.link/3c8f225a8a9fade647d19b014df1172544643e4a.1750061612.git.leon@kernel.org Signed-off-by: Leon Romanovsky <leon@kernel.org>
2025-06-25um: vector: Reduce stack usage in vector_eth_configure()Tiwei Bie
When compiling with clang (19.1.7), initializing *vp using a compound literal may result in excessive stack usage. Fix it by initializing the required fields of *vp individually. Without this patch: $ objdump -d arch/um/drivers/vector_kern.o | ./scripts/checkstack.pl x86_64 0 ... 0x0000000000000540 vector_eth_configure [vector_kern.o]:1472 ... With this patch: $ objdump -d arch/um/drivers/vector_kern.o | ./scripts/checkstack.pl x86_64 0 ... 0x0000000000000540 vector_eth_configure [vector_kern.o]:208 ... Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202506221017.WtB7Usua-lkp@intel.com/ Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com> Link: https://patch.msgid.link/20250623110829.314864-1-tiwei.btw@antgroup.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-06-25um: Use correct data source in fpregs_legacy_set()Tiwei Bie
Read from the buffer pointed to by 'from' instead of '&buf', as 'buf' contains no valid data when 'ubuf' is NULL. Fixes: b1e1bd2e6943 ("um: Add helper functions to get/set state for SECCOMP") Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com> Link: https://patch.msgid.link/20250606124428.148164-5-tiwei.btw@antgroup.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-06-25um: vfio: Prevent duplicate device assignmentsTiwei Bie
Ensure devices are assigned only once. Reject subsequent requests for duplicate assignments. Fixes: a0e2cb6a9063 ("um: Add VFIO-based virtual PCI driver") Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com> Link: https://patch.msgid.link/20250606124428.148164-4-tiwei.btw@antgroup.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-06-25um: ubd: Add missing error check in start_io_thread()Tiwei Bie
The subsequent call to os_set_fd_block() overwrites the previous return value. OR the two return values together to fix it. Fixes: f88f0bdfc32f ("um: UBD Improvements") Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com> Link: https://patch.msgid.link/20250606124428.148164-2-tiwei.btw@antgroup.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-06-25drm/i915: fix build error some moreArnd Bergmann
An earlier patch fixed a build failure with clang, but I still see the same problem with some configurations using gcc: drivers/gpu/drm/i915/i915_pmu.c: In function 'config_mask': include/linux/compiler_types.h:568:38: error: call to '__compiletime_assert_462' declared with attribute error: BUILD_BUG_ON failed: bit > BITS_PER_TYPE(typeof_member(struct i915_pmu, enable)) - 1 drivers/gpu/drm/i915/i915_pmu.c:116:3: note: in expansion of macro 'BUILD_BUG_ON' 116 | BUILD_BUG_ON(bit > As I understand it, the problem is that the function is not always fully inlined, but the __builtin_constant_p() can still evaluate the argument as being constant. Marking it as __always_inline so far works for me in all configurations. Fixes: a7137b1825b5 ("drm/i915/pmu: Fix build error with GCOV and AutoFDO enabled") Fixes: a644fde77ff7 ("drm/i915/pmu: Change bitmask of enabled events to u32") Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20250620111824.3395007-1-arnd@kernel.org Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> (cherry picked from commit ef69f9dd1cd7301cdf04ba326ed28152a3affcf6) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2025-06-25ALSA: usb: qcom: fix NULL pointer dereference in qmi_stop_sessionPei Xiao
The find_substream() call may return NULL, but the error path dereferenced 'subs' unconditionally via dev_err(&subs->dev->dev, ...), causing a NULL pointer dereference when subs is NULL. Fix by switching to &uadev[idx].udev->dev which is always valid in this context. Signed-off-by: Pei Xiao <xiaopei01@kylinos.cn> Link: https://patch.msgid.link/86ac2939273ac853535049e60391c09d7688714e.1750755508.git.xiaopei01@kylinos.cn Signed-off-by: Takashi Iwai <tiwai@suse.de>
2025-06-24io_uring: don't assume uaddr alignment in io_vec_fill_bvecPavel Begunkov
There is no guaranteed alignment for user pointers. Don't use mask trickery and adjust the offset by bv_offset. Cc: stable@vger.kernel.org Reported-by: David Hildenbrand <david@redhat.com> Fixes: 9ef4cbbcb4ac3 ("io_uring: add infra for importing vectored reg buffers") Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/io-uring/19530391f5c361a026ac9b401ff8e123bde55d98.1750771718.git.asml.silence@gmail.com/ Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-06-24io_uring/rsrc: don't rely on user vaddr alignmentPavel Begunkov
There is no guaranteed alignment for user pointers, however the calculation of an offset of the first page into a folio after coalescing uses some weird bit mask logic, get rid of it. Cc: stable@vger.kernel.org Reported-by: David Hildenbrand <david@redhat.com> Fixes: a8edbb424b139 ("io_uring/rsrc: enable multi-hugepage buffer coalescing") Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/io-uring/e387b4c78b33f231105a601d84eefd8301f57954.1750771718.git.asml.silence@gmail.com/ Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-06-24io_uring/rsrc: fix folio unpinningPavel Begunkov
syzbot complains about an unmapping failure: [ 108.070381][ T14] kernel BUG at mm/gup.c:71! [ 108.070502][ T14] Internal error: Oops - BUG: 00000000f2000800 [#1] SMP [ 108.123672][ T14] Hardware name: QEMU KVM Virtual Machine, BIOS edk2-20250221-8.fc42 02/21/2025 [ 108.127458][ T14] Workqueue: iou_exit io_ring_exit_work [ 108.174205][ T14] Call trace: [ 108.175649][ T14] sanity_check_pinned_pages+0x7cc/0x7d0 (P) [ 108.178138][ T14] unpin_user_page+0x80/0x10c [ 108.180189][ T14] io_release_ubuf+0x84/0xf8 [ 108.182196][ T14] io_free_rsrc_node+0x250/0x57c [ 108.184345][ T14] io_rsrc_data_free+0x148/0x298 [ 108.186493][ T14] io_sqe_buffers_unregister+0x84/0xa0 [ 108.188991][ T14] io_ring_ctx_free+0x48/0x480 [ 108.191057][ T14] io_ring_exit_work+0x764/0x7d8 [ 108.193207][ T14] process_one_work+0x7e8/0x155c [ 108.195431][ T14] worker_thread+0x958/0xed8 [ 108.197561][ T14] kthread+0x5fc/0x75c [ 108.199362][ T14] ret_from_fork+0x10/0x20 We can pin a tail page of a folio, but then io_uring will try to unpin the head page of the folio. While it should be fine in terms of keeping the page actually alive, mm folks say it's wrong and triggers a debug warning. Use unpin_user_folio() instead of unpin_user_page*. Cc: stable@vger.kernel.org Debugged-by: David Hildenbrand <david@redhat.com> Reported-by: syzbot+1d335893772467199ab6@syzkaller.appspotmail.com Closes: https://lkml.kernel.org/r/683f1551.050a0220.55ceb.0017.GAE@google.com Fixes: a8edbb424b139 ("io_uring/rsrc: enable multi-hugepage buffer coalescing") Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/io-uring/a28b0f87339ac2acf14a645dad1e95bbcbf18acd.1750771718.git.asml.silence@gmail.com/ [axboe: adapt to current tree, massage commit message] Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-06-24ublk: setup ublk_io correctly in case of ublk_get_data() failureMing Lei
If ublk_get_data() fails, -EIOCBQUEUED is returned and the current command becomes ASYNC. And the only reason is that mapping data can't move on, because of no enough pages or pending signal, then the current ublk request has to be requeued. Once the request need to be requeued, we have to setup `ublk_io` correctly, including io->cmd and flags, otherwise the request may not be forwarded to ublk server successfully. Fixes: 9810362a57cb ("ublk: don't call ublk_dispatch_req() for NEED_GET_DATA") Reported-by: Changhui Zhong <czhong@redhat.com> Closes: https://lore.kernel.org/linux-block/CAGVVp+VN9QcpHUz_0nasFf5q9i1gi8H8j-G-6mkBoqa3TyjRHA@mail.gmail.com/ Signed-off-by: Ming Lei <ming.lei@redhat.com> Tested-by: Changhui Zhong <czhong@redhat.com> Link: https://lore.kernel.org/r/20250624104121.859519-1-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-06-24ublk: update UBLK_F_SUPPORT_ZERO_COPY comment in UAPI headerCaleb Sander Mateos
UBLK_F_SUPPORT_ZERO_COPY has a very old comment describing the initial idea for how zero-copy would be implemented. The actual implementation added in commit 1f6540e2aabb ("ublk: zc register/unregister bvec") uses io_uring registered buffers rather than shared memory mapping. Remove the inaccurate remarks about mapping ublk request memory into the ublk server's address space and requiring 4K block size. Replace them with a description of the current zero-copy mechanism. Signed-off-by: Caleb Sander Mateos <csander@purestorage.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20250621171015.354932-1-csander@purestorage.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-06-24ublk: fix narrowing warnings in UAPI headerCaleb Sander Mateos
When a C++ file compiled with -Wc++11-narrowing includes the UAPI header linux/ublk_cmd.h, ublk_sqe_addr_to_auto_buf_reg()'s assignments of u64 values to u8, u16, and u32 fields result in compiler warnings. Add explicit casts to the intended types to avoid these warnings. Drop the unnecessary bitmasks. Reported-by: Uday Shankar <ushankar@purestorage.com> Signed-off-by: Caleb Sander Mateos <csander@purestorage.com> Fixes: 99c1e4eb6a3f ("ublk: register buffer to local io_uring with provided buf index via UBLK_F_AUTO_BUF_REG") Reviewed-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20250621162842.337452-1-csander@purestorage.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-06-24selftests: ublk: don't take same backing file for more than one ublk devicesMing Lei
Don't use same backing file for more than one ublk devices, and avoid concurrent write on same file from more ublk disks. Fixes: 8ccebc19ee3d ("selftests: ublk: support UBLK_F_AUTO_BUF_REG") Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20250623011934.741788-3-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-06-24ublk: build batch from IOs in same io_ring_ctx and io taskMing Lei
ublk_queue_cmd_list() dispatches the whole batch list by scheduling task work via the tail request's io_uring_cmd, this way is fine even though more than one io_ring_ctx are involved for this batch since it is just one running context. However, the task work handler ublk_cmd_list_tw_cb() takes `issue_flags` of tail uring_cmd's io_ring_ctx for completing all commands. This way is wrong if any uring_cmd is issued from different io_ring_ctx. Fixes it by always building batch IOs from same io_ring_ctx and io task because ublk_dispatch_req() does validate task context, and IO needs to be aborted in case of running from fallback task work context. For typical per-queue or per-io daemon implementation, this way shouldn't make difference from performance viewpoint, because single io_ring_ctx is taken in each daemon for normal use case. Fixes: d796cea7b9f3 ("ublk: implement ->queue_rqs()") Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20250625022554.883571-1-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-06-24bnxt: properly flush XDP redirect listsYan Zhai
We encountered following crash when testing a XDP_REDIRECT feature in production: [56251.579676] list_add corruption. next->prev should be prev (ffff93120dd40f30), but was ffffb301ef3a6740. (next=ffff93120dd 40f30). [56251.601413] ------------[ cut here ]------------ [56251.611357] kernel BUG at lib/list_debug.c:29! [56251.621082] Oops: invalid opcode: 0000 [#1] PREEMPT SMP NOPTI [56251.632073] CPU: 111 UID: 0 PID: 0 Comm: swapper/111 Kdump: loaded Tainted: P O 6.12.33-cloudflare-2025.6. 3 #1 [56251.653155] Tainted: [P]=PROPRIETARY_MODULE, [O]=OOT_MODULE [56251.663877] Hardware name: MiTAC GC68B-B8032-G11P6-GPU/S8032GM-HE-CFR, BIOS V7.020.B10-sig 01/22/2025 [56251.682626] RIP: 0010:__list_add_valid_or_report+0x4b/0xa0 [56251.693203] Code: 0e 48 c7 c7 68 e7 d9 97 e8 42 16 fe ff 0f 0b 48 8b 52 08 48 39 c2 74 14 48 89 f1 48 c7 c7 90 e7 d9 97 48 89 c6 e8 25 16 fe ff <0f> 0b 4c 8b 02 49 39 f0 74 14 48 89 d1 48 c7 c7 e8 e7 d9 97 4c 89 [56251.725811] RSP: 0018:ffff93120dd40b80 EFLAGS: 00010246 [56251.736094] RAX: 0000000000000075 RBX: ffffb301e6bba9d8 RCX: 0000000000000000 [56251.748260] RDX: 0000000000000000 RSI: ffff9149afda0b80 RDI: ffff9149afda0b80 [56251.760349] RBP: ffff9131e49c8000 R08: 0000000000000000 R09: ffff93120dd40a18 [56251.772382] R10: ffff9159cf2ce1a8 R11: 0000000000000003 R12: ffff911a80850000 [56251.784364] R13: ffff93120fbc7000 R14: 0000000000000010 R15: ffff9139e7510e40 [56251.796278] FS: 0000000000000000(0000) GS:ffff9149afd80000(0000) knlGS:0000000000000000 [56251.809133] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [56251.819561] CR2: 00007f5e85e6f300 CR3: 00000038b85e2006 CR4: 0000000000770ef0 [56251.831365] PKRU: 55555554 [56251.838653] Call Trace: [56251.845560] <IRQ> [56251.851943] cpu_map_enqueue.cold+0x5/0xa [56251.860243] xdp_do_redirect+0x2d9/0x480 [56251.868388] bnxt_rx_xdp+0x1d8/0x4c0 [bnxt_en] [56251.877028] bnxt_rx_pkt+0x5f7/0x19b0 [bnxt_en] [56251.885665] ? cpu_max_write+0x1e/0x100 [56251.893510] ? srso_alias_return_thunk+0x5/0xfbef5 [56251.902276] __bnxt_poll_work+0x190/0x340 [bnxt_en] [56251.911058] bnxt_poll+0xab/0x1b0 [bnxt_en] [56251.919041] ? srso_alias_return_thunk+0x5/0xfbef5 [56251.927568] ? srso_alias_return_thunk+0x5/0xfbef5 [56251.935958] ? srso_alias_return_thunk+0x5/0xfbef5 [56251.944250] __napi_poll+0x2b/0x160 [56251.951155] bpf_trampoline_6442548651+0x79/0x123 [56251.959262] __napi_poll+0x5/0x160 [56251.966037] net_rx_action+0x3d2/0x880 [56251.973133] ? srso_alias_return_thunk+0x5/0xfbef5 [56251.981265] ? srso_alias_return_thunk+0x5/0xfbef5 [56251.989262] ? __hrtimer_run_queues+0x162/0x2a0 [56251.996967] ? srso_alias_return_thunk+0x5/0xfbef5 [56252.004875] ? srso_alias_return_thunk+0x5/0xfbef5 [56252.012673] ? bnxt_msix+0x62/0x70 [bnxt_en] [56252.019903] handle_softirqs+0xcf/0x270 [56252.026650] irq_exit_rcu+0x67/0x90 [56252.032933] common_interrupt+0x85/0xa0 [56252.039498] </IRQ> [56252.044246] <TASK> [56252.048935] asm_common_interrupt+0x26/0x40 [56252.055727] RIP: 0010:cpuidle_enter_state+0xb8/0x420 [56252.063305] Code: dc 01 00 00 e8 f9 79 3b ff e8 64 f7 ff ff 49 89 c5 0f 1f 44 00 00 31 ff e8 a5 32 3a ff 45 84 ff 0f 85 ae 01 00 00 fb 45 85 f6 <0f> 88 88 01 00 00 48 8b 04 24 49 63 ce 4c 89 ea 48 6b f1 68 48 29 [56252.088911] RSP: 0018:ffff93120c97fe98 EFLAGS: 00000202 [56252.096912] RAX: ffff9149afd80000 RBX: ffff9141d3a72800 RCX: 0000000000000000 [56252.106844] RDX: 00003329176c6b98 RSI: ffffffe36db3fdc7 RDI: 0000000000000000 [56252.116733] RBP: 0000000000000002 R08: 0000000000000002 R09: 000000000000004e [56252.126652] R10: ffff9149afdb30c4 R11: 071c71c71c71c71c R12: ffffffff985ff860 [56252.136637] R13: 00003329176c6b98 R14: 0000000000000002 R15: 0000000000000000 [56252.146667] ? cpuidle_enter_state+0xab/0x420 [56252.153909] cpuidle_enter+0x2d/0x40 [56252.160360] do_idle+0x176/0x1c0 [56252.166456] cpu_startup_entry+0x29/0x30 [56252.173248] start_secondary+0xf7/0x100 [56252.179941] common_startup_64+0x13e/0x141 [56252.186886] </TASK> From the crash dump, we found that the cpu_map_flush_list inside redirect info is partially corrupted: its list_head->next points to itself, but list_head->prev points to a valid list of unflushed bq entries. This turned out to be a result of missed XDP flush on redirect lists. By digging in the actual source code, we found that commit 7f0a168b0441 ("bnxt_en: Add completion ring pointer in TX and RX ring structures") incorrectly overwrites the event mask for XDP_REDIRECT in bnxt_rx_xdp. We can stably reproduce this crash by returning XDP_TX and XDP_REDIRECT randomly for incoming packets in a naive XDP program. Properly propagate the XDP_REDIRECT events back fixes the crash. Fixes: a7559bc8c17c ("bnxt: support transmit and free of aggregation buffers") Tested-by: Andrew Rzeznik <arzeznik@cloudflare.com> Signed-off-by: Yan Zhai <yan@cloudflare.com> Acked-by: Jesper Dangaard Brouer <hawk@kernel.org> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Link: https://patch.msgid.link/aFl7jpCNzscumuN2@debian.debian Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-24Merge tag 'selinux-pr-20250624' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux Pull selinux fix from Paul Moore: "Another small SELinux patch to fix a problem seen by the dracut-ng folks during early boot when SELinux is enabled, but the policy has yet to be loaded" * tag 'selinux-pr-20250624' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux: selinux: change security_compute_sid to return the ssid or tsid on match
2025-06-24vsock/uapi: fix linux/vm_sockets.h userspace compilation errorsStefano Garzarella
If a userspace application just include <linux/vm_sockets.h> will fail to build with the following errors: /usr/include/linux/vm_sockets.h:182:39: error: invalid application of ‘sizeof’ to incomplete type ‘struct sockaddr’ 182 | unsigned char svm_zero[sizeof(struct sockaddr) - | ^~~~~~ /usr/include/linux/vm_sockets.h:183:39: error: ‘sa_family_t’ undeclared here (not in a function) 183 | sizeof(sa_family_t) - | Include <sys/socket.h> for userspace (guarded by ifndef __KERNEL__) where `struct sockaddr` and `sa_family_t` are defined. We already do something similar in <linux/mptcp.h> and <linux/if.h>. Fixes: d021c344051a ("VSOCK: Introduce VM Sockets") Reported-by: Daan De Meyer <daan.j.demeyer@gmail.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Link: https://patch.msgid.link/20250623100053.40979-1-sgarzare@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-24bcachefs: fix bch2_journal_keys_peek_prev_min() underflowKent Overstreet
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2025-06-24bcachefs: Use wait_on_allocator() when allocating journalKent Overstreet
wait_on_allocator() emits debug info when we hang trying to allocate. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2025-06-24x86/traps: Initialize DR7 by writing its architectural reset valueXin Li (Intel)
Initialize DR7 by writing its architectural reset value to always set bit 10, which is reserved to '1', when "clearing" DR7 so as not to trigger unanticipated behavior if said bit is ever unreserved, e.g. as a feature enabling flag with inverted polarity. Signed-off-by: Xin Li (Intel) <xin@zytor.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: H. Peter Anvin (Intel) <hpa@zytor.com> Reviewed-by: Sohil Mehta <sohil.mehta@intel.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Sean Christopherson <seanjc@google.com> Tested-by: Sohil Mehta <sohil.mehta@intel.com> Cc:stable@vger.kernel.org Link: https://lore.kernel.org/all/20250620231504.2676902-3-xin%40zytor.com
2025-06-24x86/traps: Initialize DR6 by writing its architectural reset valueXin Li (Intel)
Initialize DR6 by writing its architectural reset value to avoid incorrectly zeroing DR6 to clear DR6.BLD at boot time, which leads to a false bus lock detected warning. The Intel SDM says: 1) Certain debug exceptions may clear bits 0-3 of DR6. 2) BLD induced #DB clears DR6.BLD and any other debug exception doesn't modify DR6.BLD. 3) RTM induced #DB clears DR6.RTM and any other debug exception sets DR6.RTM. To avoid confusion in identifying debug exceptions, debug handlers should set DR6.BLD and DR6.RTM, and clear other DR6 bits before returning. The DR6 architectural reset value 0xFFFF0FF0, already defined as macro DR6_RESERVED, satisfies these requirements, so just use it to reinitialize DR6 whenever needed. Since clear_all_debug_regs() no longer zeros all debug registers, rename it to initialize_debug_regs() to better reflect its current behavior. Since debug_read_clear_dr6() no longer clears DR6, rename it to debug_read_reset_dr6() to better reflect its current behavior. Fixes: ebb1064e7c2e9 ("x86/traps: Handle #DB for bus lock") Reported-by: Sohil Mehta <sohil.mehta@intel.com> Suggested-by: H. Peter Anvin (Intel) <hpa@zytor.com> Signed-off-by: Xin Li (Intel) <xin@zytor.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: H. Peter Anvin (Intel) <hpa@zytor.com> Reviewed-by: Sohil Mehta <sohil.mehta@intel.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Sohil Mehta <sohil.mehta@intel.com> Link: https://lore.kernel.org/lkml/06e68373-a92b-472e-8fd9-ba548119770c@intel.com/ Cc:stable@vger.kernel.org Link: https://lore.kernel.org/all/20250620231504.2676902-2-xin%40zytor.com
2025-06-24bcachefs: Check for bad write buffer key when moving from journalKent Overstreet
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2025-06-24bcachefs: Don't unlock the trans if ret doesn't match BCH_ERR_operation_blockedAlan Huang
Reported-by: syzbot+d540192e763531d307ff@syzkaller.appspotmail.com Signed-off-by: Alan Huang <mmpgouride@gmail.com> Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2025-06-24iommufd/selftest: Fix build warnings due to uninitialized mfdNicolin Chen
Commit 869c788909b9 ("selftests: harness: Stop using setjmp()/longjmp()") changed the harness structure. For some unknown reason, two build warnings occur to the iommufd selftest: iommufd.c: In function ‘wrapper_iommufd_mock_domain_all_aligns’: iommufd.c:1807:17: warning: ‘mfd’ may be used uninitialized in this function 1807 | close(mfd); | ^~~~~~~~~~ iommufd.c:1767:13: note: ‘mfd’ was declared here 1767 | int mfd; | ^~~ iommufd.c: In function ‘wrapper_iommufd_mock_domain_all_aligns_copy’: iommufd.c:1870:17: warning: ‘mfd’ may be used uninitialized in this function 1870 | close(mfd); | ^~~~~~~~~~ iommufd.c:1819:13: note: ‘mfd’ was declared here 1819 | int mfd; | ^~~ All the mfd have been used in the variant->file path only, so it's likely a false alarm. FWIW, the commit mentioned above does not cause this, yet it might affect gcc in a certain way that resulted in the warnings. It is also found that ading a dummy setjmp (which doesn't make sense) could mute the warnings: https://lore.kernel.org/all/aEi8DV+ReF3v3Rlf@nvidia.com/ The job of this selftest is to catch kernel bug, while such warnings will unlikely disrupt its role. Mute the warning by force initializing the mfd and add an ASSERT_GT(). Link: https://patch.msgid.link/r/6951d85d5cd34cbf22abab7714542654e63ecc44.1750787928.git.nicolinc@nvidia.com Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Nicolin Chen <nicolinc@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2025-06-24iommufd/selftest: Add asserts testing global mfdNicolin Chen
The mfd and mfd_buffer will be used in the tests directly without an extra check. Test them in setup_sizes() to ensure they are safe to use. Fixes: 0bcceb1f51c7 ("iommufd: Selftest coverage for IOMMU_IOAS_MAP_FILE") Link: https://patch.msgid.link/r/94bdc11d2b6d5db337b1361c5e5fce0ed494bb40.1750787928.git.nicolinc@nvidia.com Cc: stable@vger.kernel.org Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Nicolin Chen <nicolinc@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2025-06-24iommufd/selftest: Add missing close(mfd) in memfd_mmap()Nicolin Chen
Do not forget to close mfd in the error paths, since none of the callers would close it when ASSERT_NE(MAP_FAILED, buf) fails. Fixes: 0bcceb1f51c7 ("iommufd: Selftest coverage for IOMMU_IOAS_MAP_FILE") Link: https://patch.msgid.link/r/a363a69dbf453d4bc1bde276f3b16778620488e1.1750787928.git.nicolinc@nvidia.com Cc: stable@vger.kernel.org Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Nicolin Chen <nicolinc@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2025-06-24iommufd/selftest: Fix iommufd_dirty_tracking with large hugepage sizesNicolin Chen
The hugepage test cases of iommufd_dirty_tracking have the 64MB and 128MB coverages. Both of them are smaller than the default hugepage size 512MB, when CONFIG_PAGE_SIZE_64KB=y. However, these test cases have a variant of using huge pages, which would mmap(MAP_HUGETLB) using these smaller sizes than the system hugepag size. This results in the kernel aligning up the smaller size to 512MB. If a memory was located between the upper 64/128MB size boundary and the hugepage 512MB boundary, it would get wiped out: https://lore.kernel.org/all/aEoUhPYIAizTLADq@nvidia.com/ Given that this aligning up behavior is well documented, we have no choice but to allocate a hugepage aligned size to avoid this unintended wipe out. Instead of relying on the kernel's internal force alignment, pass the same size to posix_memalign() and map(). Also, fix the FIXTURE_TEARDOWN() misusing munmap() to free the memory from posix_memalign(), as munmap() doesn't destroy the allocator meta data. So, call free() instead. Fixes: a9af47e382a4 ("iommufd/selftest: Test IOMMU_HWPT_GET_DIRTY_BITMAP") Link: https://patch.msgid.link/r/1ea8609ae6d523fdd4d8efb179ddee79c8582cb6.1750787928.git.nicolinc@nvidia.com Cc: stable@vger.kernel.org Suggested-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Nicolin Chen <nicolinc@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2025-06-24drm/xe/hwmon: Fix xe_hwmon_power_max_writeKarthik Poosa
Prevent other bits of mailbox power limit from being overwritten with 0. This issue was due to a missing read and modify of current power limit, before setting a requested mailbox power limit, which is added in this patch. v2: - Improve commit message. (Anshuman) v3: - Rebase. - Rephrase commit message. (Riana) - Add read-modify-write variant of xe_hwmon_pcode_write_power_limit() i.e. xe_hwmon_pcode_rmw_power_limit(). (Badal) - Use xe_hwmon_pcode_rmw_power_limit() to set mailbox power limits. - Remove xe_hwmon_pcode_write_power_limit() as all mailbox power limits writes use xe_hwmon_pcode_rmw_power_limit() only. v4: - Use PWR_LIM in place of (PWR_LIM_EN | PWR_LIM_VAL) wherever applicable. (Riana) Fixes: 25a2aa779fc3 ("drm/xe/hwmon: Add support to manage power limits though mailbox") Reviewed-by: Riana Tauro <riana.tauro@intel.com> Signed-off-by: Karthik Poosa <karthik.poosa@intel.com> Reviewed-by: Badal Nilawar <badal.nilawar@intel.com> Link: https://lore.kernel.org/r/20250617120030.612819-1-karthik.poosa@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> (cherry picked from commit 8aa7306631f088881759398972d503757cf0c901) Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
2025-06-24drm/xe/display: Add check for alloc_ordered_workqueue()Haoxiang Li
Add check for the return value of alloc_ordered_workqueue() in xe_display_create() to catch potential exception. Fixes: 44e694958b95 ("drm/xe/display: Implement display support") Cc: stable@vger.kernel.org Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://lore.kernel.org/r/4ee1b0e5d1626ce1dde2e82af05c2edaed50c3aa.1747397638.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com> (cherry picked from commit 5b62d63395d5b7d4094e7cd380bccae4b25415cb) Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
2025-06-24spi: spi-cadence-quadspi: Fix pm runtime unbalanceKhairul Anuar Romli
Having PM put sync in remove function is causing PM underflow during remove operation. This is caused by the function, runtime_pm_get_sync, not being called anywhere during the op. Ensure that calls to pm_runtime_enable()/pm_runtime_disable() and pm_runtime_get_sync()/pm_runtime_put_sync() match. echo 108d2000.spi > /sys/bus/platform/drivers/cadence-qspi/unbind [ 49.644256] Deleting MTD partitions on "108d2000.spi.0": [ 49.649575] Deleting u-boot MTD partition [ 49.684087] Deleting root MTD partition [ 49.724188] cadence-qspi 108d2000.spi: Runtime PM usage count underflow! Continuous bind/unbind will result in an "Unbalanced pm_runtime_enable" error. Subsequent unbind attempts will return a "No such device" error, while bind attempts will return a "Resource temporarily unavailable" error. [ 47.592434] cadence-qspi 108d2000.spi: Runtime PM usage count underflow! [ 49.592233] cadence-qspi 108d2000.spi: detected FIFO depth (1024) different from config (128) [ 53.232309] cadence-qspi 108d2000.spi: Runtime PM usage count underflow! [ 55.828550] cadence-qspi 108d2000.spi: detected FIFO depth (1024) different from config (128) [ 57.940627] cadence-qspi 108d2000.spi: Runtime PM usage count underflow! [ 59.912490] cadence-qspi 108d2000.spi: detected FIFO depth (1024) different from config (128) [ 61.876243] cadence-qspi 108d2000.spi: Runtime PM usage count underflow! [ 61.883000] platform 108d2000.spi: Unbalanced pm_runtime_enable! [ 532.012270] cadence-qspi 108d2000.spi: probe with driver cadence-qspi failed1 Also, change clk_disable_unprepare() to clk_disable() since continuous bind and unbind operations will trigger a warning indicating that the clock is already unprepared. Fixes: 4892b374c9b7 ("mtd: spi-nor: cadence-quadspi: Add runtime PM support") cc: stable@vger.kernel.org # 6.6+ Signed-off-by: Khairul Anuar Romli <khairul.anuar.romli@altera.com> Reviewed-by: Matthew Gerlach <matthew.gerlach@altera.com> Link: https://patch.msgid.link/4e7a4b8aba300e629b45a04f90bddf665fbdb335.1749601877.git.khairul.anuar.romli@altera.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-06-24ASoC: SOF: Intel: hda: Use devm_kstrdup() to avoid memleak.Tamura Dai
sof_pdata->tplg_filename can have address allocated by kstrdup() and can be overwritten. Memory leak was detected with kmemleak: unreferenced object 0xffff88812391ff60 (size 16): comm "kworker/4:1", pid 161, jiffies 4294802931 hex dump (first 16 bytes): 73 6f 66 2d 68 64 61 2d 67 65 6e 65 72 69 63 00 sof-hda-generic. backtrace (crc 4bf1675c): __kmalloc_node_track_caller_noprof+0x49c/0x6b0 kstrdup+0x46/0xc0 hda_machine_select.cold+0x1de/0x12cf [snd_sof_intel_hda_generic] sof_init_environment+0x16f/0xb50 [snd_sof] sof_probe_continue+0x45/0x7c0 [snd_sof] sof_probe_work+0x1e/0x40 [snd_sof] process_one_work+0x894/0x14b0 worker_thread+0x5e5/0xfb0 kthread+0x39d/0x760 ret_from_fork+0x31/0x70 ret_from_fork_asm+0x1a/0x30 Signed-off-by: Tamura Dai <kirinode0@gmail.com> Link: https://patch.msgid.link/20250615235548.8591-1-kirinode0@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-06-24drm/amd/display: Add sanity checks for drm_edid_raw()Takashi Iwai
When EDID is retrieved via drm_edid_raw(), it doesn't guarantee to return proper EDID bytes the caller wants: it may be either NULL (that leads to an Oops) or with too long bytes over the fixed size raw_edid array (that may lead to memory corruption). The latter was reported actually when connected with a bad adapter. Add sanity checks for drm_edid_raw() to address the above corner cases, and return EDID_BAD_INPUT accordingly. Fixes: 48edb2a4256e ("drm/amd/display: switch amdgpu_dm_connector to use struct drm_edid") Link: https://bugzilla.suse.com/show_bug.cgi?id=1236415 Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 648d3f4d209725d51900d6a3ed46b7b600140cdf) Cc: stable@vger.kernel.org
2025-06-24drm/amd/display: Fix AMDGPU_MAX_BL_LEVEL valueMario Limonciello
[Why] commit 16dc8bc27c2a ("drm/amd/display: Export full brightness range to userspace") adjusted the brightness range to scale to larger values, but missed updating AMDGPU_MAX_BL_LEVEL which is needed to make sure that scaling works properly with custom brightness curves. [How] As the change for max brightness of 0xFFFF only applies to devices supporting DC, use existing DC define MAX_BACKLIGHT_LEVEL. Fixes: 16dc8bc27c2a ("drm/amd/display: Export full brightness range to userspace") Acked-by: Alex Deucher <alexander.deucher@amd.com> Link: https://lore.kernel.org/r/20250623171114.1156451-1-mario.limonciello@amd.com Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 5b852044eb0d3e1f1c946d32e05fcb068e0a20a0) Cc: stable@vger.kernel.org
2025-06-24drm/amdgpu/sdma7: add ucode version checks for userq supportAlex Deucher
SDMA 7.0.0/1: 7836028 Reviewed-by: Jesse Zhang <Jesse.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 8c011408ed842dfccdd50a90a9cf6bccdb85cc0e)
2025-06-24drm/amdgpu/sdma6: add ucode version checks for userq supportAlex Deucher
SDMA 6.0.0 version 24 SDMA 6.0.2 version 21 SDMA 6.0.3 version 25 Reviewed-by: Jesse Zhang <Jesse.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit e8cca30d8b34f1c4101c237914c53068d4a55e73)
2025-06-24drm/amd: Adjust output for discovery error handlingMario Limonciello
commit 017fbb6690c2 ("drm/amdgpu/discovery: check ip_discovery fw file available") added support for reading an amdgpu IP discovery bin file for some specific products. If it's not found then it will fallback to hardcoded values. However if it's not found there is also a lot of noise about missing files and errors. Adjust the error handling to decrease most messages to DEBUG and to show users less about missing files. Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Reported-by: Marcus Seyfarth <m.seyfarth@gmail.com> Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4312 Tested-by: Marcus Seyfarth <m.seyfarth@gmail.com> Fixes: 017fbb6690c2 ("drm/amdgpu/discovery: check ip_discovery fw file available") Acked-by: Alex Deucher <alexander.deucher@amd.com> Link: https://lore.kernel.org/r/20250617183052.1692059-1-superm1@kernel.org Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 49f1f9f6c3c9febf8ba93f94a8d9c8d03e1ea0a1)
2025-06-24drm/amdgpu/mes: add compatibility checks for set_hw_resource_1Alex Deucher
Seems some older MES firmware versions do not properly support this packet. Add back some the compatibility checks. v2: switch to fw version check (Shaoyun) Fixes: f81cd793119e ("drm/amd/amdgpu: Fix MES init sequence") Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4295 Cc: Shaoyun Liu <shaoyun.liu@amd.com> Reviewed-by: shaoyun.liu <shaoyun.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 0180e0a5dd5c6ff118043ee42dbbbddaf881f283) Cc: stable@vger.kernel.org
2025-06-24drm/amdgpu/gfx9: Add Cleaner Shader Support for GFX9.x GPUsSrinivasan Shanmugam
Enable the cleaner shader for other GFX9.x series of GPUs to provide data isolation between GPU workloads. The cleaner shader is responsible for clearing the Local Data Store (LDS), Vector General Purpose Registers (VGPRs), and Scalar General Purpose Registers (SGPRs), which helps prevent data leakage and ensures accurate computation results. This update extends cleaner shader support to GFX9.x GPUs, previously available for GFX9.4.2. It enhances security by clearing GPU memory between processes and maintains a consistent GPU state across KGD and KFD workloads. Cc: Manu Rastogi <manu.rastogi@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 99808926d0ea6234a89e35240a7cb088368de9e1)
2025-06-24dt-bindings: serial: 8250: Make clocks and clock-frequency exclusiveYao Zi
The 8250 binding before converting to json-schema states, - clock-frequency : the input clock frequency for the UART or - clocks phandle to refer to the clk used as per Documentation/devicetree for clock-related properties, where "or" indicates these properties shouldn't exist at the same time. Additionally, the behavior of Linux's driver is strange when both clocks and clock-frequency are specified: it ignores clocks and obtains the frequency from clock-frequency, left the specified clocks unclaimed. It may even be disabled, which is undesired most of the time. But "anyOf" doesn't prevent these two properties from coexisting, as it considers the object valid as long as there's at LEAST one match. Let's switch to "oneOf" and disallows the other property if one exists, precisely matching the original binding and avoiding future confusion on the driver's behavior. Fixes: e69f5dc623f9 ("dt-bindings: serial: Convert 8250 to json-schema") Cc: stable <stable@kernel.org> Signed-off-by: Yao Zi <ziyao@disroot.org> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20250623093445.62327-1-ziyao@disroot.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-24serial: imx: Restore original RXTL for console to fix data lossFabio Estevam
Commit 7a637784d517 ("serial: imx: reduce RX interrupt frequency") introduced a regression on the i.MX6UL EVK board. The issue can be reproduced with the following steps: - Open vi on the board. - Paste a text file (~150 characters). - Save the file, then repeat the process. - Compare the sha256sum of the saved files. The checksums do not match due to missing characters or entire lines. Fix this by restoring the RXTL value to 1 when the UART is used as a console. This ensures timely RX interrupts and reliable data reception in console mode. With this change, pasted content is saved correctly, and checksums are always consistent. Cc: stable <stable@kernel.org> Fixes: 7a637784d517 ("serial: imx: reduce RX interrupt frequency") Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Stefan Wahren <wahrenst@gmx.net> Link: https://lore.kernel.org/r/20250619114617.2791939-1-festevam@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-24userns and mnt_idmap leak in open_tree_attr(2)Al Viro
Once want_mount_setattr() has returned a positive, it does require finish_mount_kattr() to release ->mnt_userns. Failing do_mount_setattr() does not change that. As the result, we can end up leaking userns and possibly mnt_idmap as well. Fixes: c4a16820d901 ("fs: add open_tree_attr()") Reviewed-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2025-06-24rtc: pcf2127: add missing semicolon after statementHugo Villeneuve
Replace comma with semicolon at the end of the statement when setting config.max_register. Fixes: fd28ceb4603f ("rtc: pcf2127: add variant-specific configuration structure") Cc: stable@vger.kernel.org Cc: Elena Popa <elena.popa@nxp.com> Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Link: https://lore.kernel.org/r/20250529202923.1552560-1-hugo@hugovil.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
generated by cgit (git 2.34.1) at 2025-09-11 10:06:35 +0000