summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-03-26intel_pstate: Use del_timer_sync in intel_pstate_cpu_stopDirk Brandewie
Ensure that no timer callback is running since we are about to free the timer structure. We cannot guarantee that the call back is called on the CPU where the timer is running. Reported-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com> Reviewed-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-03-26cpufreq: resume drivers before enabling governorsViresh Kumar
During suspend, we first stop governors and then suspend cpufreq drivers and resume must be exactly opposite of that. i.e. resume drivers first and then start governors. But the current code in resume enables governors first and then resume drivers. Fix it be changing code sequence there. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-03-26PM / Runtime: Spelling s/competing/completing/Geert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-03-26PM / Runtime: s/foo_process_requests/foo_process_next_request/Geert Uytterhoeven
The example uses foo_process_next_request() everywhere else. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-03-26PM / Runtime: GENERIC_SUBSYS_PM_OPS is goneGeert Uytterhoeven
Update the documentation for the removal of GENERIC_SUBSYS_PM_OPS in commit 90363ddf0a1a4dccfbb8d0c10b8f488bc7fa69f8 ("PM: Drop generic_subsys_pm_ops") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-03-26PM / Runtime: Correct documented return values for generic PM callbacksGeert Uytterhoeven
As of commit 05aa55dddb9ee4045c320661068bea78dad6a6e5 ("PM / Runtime: Lenient generic runtime pm callbacks"), the generic power management callbacks pm_generic_runtime_suspend() and pm_generic_runtime_resume() return 0, not -EINVAL, if the device doesn't provide its own callbacks. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-03-26PM / Runtime: Split line longer than 80 charactersGeert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-03-26PM / Runtime: dev_pm_info.runtime_error is signedGeert Uytterhoeven
dev_pm_info.runtime_error has always been a signed int, to store a signed error code. Correct the documentation. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-03-26Revert "ACPI / processor: Make it possible to get APIC ID via GIC"Hanjun Guo
Revert commit df86f5df79d8 (ACPI / processor: Make it possible to get APIC ID via GIC). APIC ID refers the hardware ID of the CPU, which means MPIDR on ARM/ARM64, but in ACPI 5.0, GIC ID feild in GIC structure have no explicit definition and may not refer to the MPIDR. Commit df86f5df79d8 assumed that gic->gic_id as MPIDR which may not be the case, so revert it until the explicit definition of GIC structure is ready. Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> [rjw: Changelog] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-03-26ACPICA: Enable auto-serialization as a default kernel behavior.Lv Zheng
The previous commit "ACPICA: Add auto-serialization support for ill-behaved control methods" introduced the auto-serialization facility as a workaround that can be enabled by "acpi_auto_serialize": This feature marks control methods that create named objects as "serialized" to avoid unwanted AE_ALREADY_EXISTS control method evaluation failures. Enable method auto-serialization as the default kernel behavior. The new kernel parameter is also changed from "acpi_auto_serialize" to "acpi_no_auto_serialize" to reflect the default behavior. References: https://bugzilla.kernel.org/show_bug.cgi?id=52191 References: http://www.spinics.net/lists/linux-acpi/msg49496.html Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-03-26ACPICA: Ignore sync_level for methods that have been auto-serialized.Bob Moore
Cannot use a sync_level for methods that have been serialized at load-time or runtime because this may interfere with any existing use of sync_levels within the ASL code. So, we simply ignore the sync_level for these methods, thus preserving any existing sync_level priorities. Note, the use of sync_levels is actually rather rare within BIOS ASL code. References: http://www.spinics.net/lists/linux-acpi/msg49496.html Reported-by: Valdis Kletnieks <valdis.kletnieks@vt.edu> Reported-by: Sabrina Dubroka <sd@queasysnail.net> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-03-26ACPICA: Add additional named objects for the auto-serialize method scan.Lv Zheng
This change adds some additional opcodes that are detected and will cause a method to be auto-serialized. These opcodes are the various CreateXField and the FieldUnit opcodes. Lv Zheng. References: https://bugzilla.kernel.org/show_bug.cgi?id=52191 Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-03-26ACPICA: Add auto-serialization support for ill-behaved control methods.Bob Moore
This change adds support to automatically mark a control method as "serialized" if the method creates any named objects. This will positively prevent the method from being entered by more than one thread and thus preventing a possible abort when an attempt is made to create an object twice. Implemented by parsing all non-serialize control methods at table load time. This feature is disabled by default and this patch also adds a new Linux kernel parameter "acpi_auto_serialize" to allow this feature to be turned on for a specific boot. References: https://bugzilla.kernel.org/show_bug.cgi?id=52191 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-03-26ACPICA: Remove global option to serialize all control methods.Lv Zheng
According to the reports, the "acpi_serialize" mechanism is broken as: A. The parallel method calls can still happen when the interpreter lock is released under the following conditions: 1. External callbacks are invoked, for example, by the region handlers, the exception handlers, etc.; 2. Module level execution is performed when Load/LoadTable opcodes are executed, and 3. The _REG control methods are invoked to complete the region registrations. B. For the following situations, the interpreter lock need to be released even for a serialized method while currently, the lock-releasing operation is marked as a no-op by acpi_ex_relinquish/reacquire_interpreter() when this mechanism is enabled: 1. Wait opcode is executed, 2. Acquire opcode is executed, and 3. Sleep opcode is executed. This patch removes this mechanism and the internal acpi_ex_relinquish/reacquire_interpreter() APIs. Lv Zheng. References: https://bugzilla.kernel.org/show_bug.cgi?id=52191 Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-03-26ata: fix R-Car SATA driver dependenciesBartlomiej Zolnierkiewicz
Make sata_rcar host driver depend on ARCH_SHMOBILE config option as Renesas R-Car SATA support is specific to Renesas SoCs and the driver to work requires suitable device tree node (or platform device) to be defined. Additionally allow the driver build if COMPILE_TEST config option is set. Cc: Simon Horman <horms@verge.net.au> Cc: Magnus Damm <magnus.damm@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-03-26KVM: PPC: Book3S HV: Fix KVM hang with CONFIG_KVM_XICS=nAnton Blanchard
I noticed KVM is broken when KVM in-kernel XICS emulation (CONFIG_KVM_XICS) is disabled. The problem was introduced in 48eaef05 (KVM: PPC: Book3S HV: use xics_wake_cpu only when defined). It used CONFIG_KVM_XICS to wrap xics_wake_cpu, where CONFIG_PPC_ICP_NATIVE should have been used. Signed-off-by: Anton Blanchard <anton@samba.org> Cc: stable@vger.kernel.org Signed-off-by: Paul Mackerras <paulus@samba.org> Acked-by: Scott Wood <scottwood@freescale.com>
2014-03-26KVM: PPC: Book3S: Introduce hypervisor call H_GET_TCELaurent Dufour
This introduces the H_GET_TCE hypervisor call, which is basically the reverse of H_PUT_TCE, as defined in the Power Architecture Platform Requirements (PAPR). The hcall H_GET_TCE is required by the kdump kernel, which uses it to retrieve TCEs set up by the previous (panicked) kernel. Signed-off-by: Laurent Dufour <ldufour@linux.vnet.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2014-03-26KVM: PPC: Book3S HV: Fix incorrect userspace exit on ioeventfd writeGreg Kurz
When the guest does an MMIO write which is handled successfully by an ioeventfd, ioeventfd_write() returns 0 (success) and kvmppc_handle_store() returns EMULATE_DONE. Then kvmppc_emulate_mmio() converts EMULATE_DONE to RESUME_GUEST_NV and this causes an exit from the loop in kvmppc_vcpu_run_hv(), causing an exit back to userspace with a bogus exit reason code, typically causing userspace (e.g. qemu) to crash with a message about an unknown exit code. This adds handling of RESUME_GUEST_NV in kvmppc_vcpu_run_hv() in order to fix that. For generality, we define a helper to check for either of the return-to-guest codes we use, RESUME_GUEST and RESUME_GUEST_NV, to make it easy to check for either and provide one place to update if any other return-to-guest code gets defined in future. Since it only affects Book3S HV for now, the helper is added to the kvm_book3s.h header file. We use the helper in two places in kvmppc_run_core() as well for future-proofing, though we don't see RESUME_GUEST_NV in either place at present. [paulus@samba.org - combined 4 patches into one, rewrote description] Suggested-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2014-03-26s390/con3270: optionally disable auto updateMartin Schwidefsky
This patch adds a parameter 'auto_update' to the con3270 driver, causing the 'auto_update' feature to be disabled if unset. The 'auto_update' feature will cause the con3270 driver to switch to the console view whenever new system messages are displayed, which makes working on the 3270 terminal awkward. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-03-26gpio: dwapb: correct gpio-cells in binding documentSebastian Andrzej Siewior
The example uses gpio-cells = 1 while it should be two (it is even mentioned in the text above). Cc: devicetree@vger.kernel.org Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-03-26gpio: iop: fix devm_ioremap_resource() return value checkingBartlomiej Zolnierkiewicz
devm_ioremap_resource() returns a pointer to the remapped memory or an ERR_PTR() encoded error code on failure. Fix the check inside iop3xx_gpio_probe() accordingly. Cc: Lennert Buytenhek <kernel@wantstofly.org> Cc: Mikael Pettersson <mikpe@it.uu.se> Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Acked-by: Alexandre Courbot <acourbot@nvidia.com> Acked-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-03-26pinctrl: coh901: convert driver to use gpiolib irqchipLinus Walleij
This converts the COH901 pin control driver to register its chained irq handler and irqchip using the helpers in the gpiolib core. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-03-26pinctrl: nomadik: convert driver to use gpiolib irqchipLinus Walleij
This converts the Nomadik pin control driver to register its chained irq handler and irqchip using the helpers in the gpiolib core. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-03-26gpio: pl061: convert driver to use gpiolib irqchipLinus Walleij
This converts the PL061 driver to register its chained irq handler and irqchip using the helpers in the gpiolib core. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-03-26gpio: add IRQ chip helpers in gpiolibLinus Walleij
This provides a function gpiochip_irqchip_add() to set up an irqchip for a GPIO controller, and a function gpiochip_set_chained_irqchip() to chain it to a parent irqchip. Most GPIOs are of the type where a number of lines form a cascaded interrupt controller chained onto the primary system interrupt controller (or further down the chain) so let's add this helper and factor the code to request the lines to be used as IRQs, the .to_irq() function and the irqdomain into the core as well. Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-03-26ARC: [clockevent] simplify timer ISRVineet Gupta
* Remove one liner IRQ ACK accessor, it was coming in the way of readability. Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2014-03-26ARC: [clockevent] can't be SoC specificVineet Gupta
So no point keeping it weak Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2014-03-26ARC: Remove ARC_HAS_COH_RTSCRichard Weinberger
The symbol is an orphan, get rid of it. Fixes: 7d0857a54aed ("ARC: [SMP] Disallow RTSC") Signed-off-by: Richard Weinberger <richard@nod.at> Acked-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2014-03-26ARC: switch to generic ENTRY/END assembler annotationsVineet Gupta
With commit 9df62f054406 "arch: use ASM_NL instead of ';'" the generic macros can handle the arch specific newline quirk. Hence we can get rid of ARC asm macros and use the "C" style macros. Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2014-03-26ARC: support external initrdNoam Camus
Currently ARC only supports embedded initrd. This patch enables external ones too. [vgupta: Changed from "rt_start"=start/"rd_size"=sz to unified "initrd"=start,sz] Signed-off-by: Noam Camus <noamc@ezchip.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2014-03-26ARC: add uImage to .gitignoreMischa Jonker
Signed-off-by: Mischa Jonker <mjonker@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2014-03-26ARC: [arcfpga] Fix __initconst data const-correctnessMischa Jonker
Signed-off-by: Mischa Jonker <mjonker@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2014-03-26mtd: nand: fix mention to CONFIG_MTD_NAND_ECC_BCHErico Nunes
Mention to CONFIG_MTD_ECC_BCH in the warning message can be confusing as this doesn't match the exact name of the configuration option. This warning showed up once to me when I was starting to set up BCH. After checking my .config file, it took a moment before realizing it is CONFIG_MTD_NAND_ECC_BCH instead of CONFIG_MTD_ECC_BCH. Signed-off-by: Erico Nunes <nunes.erico@gmail.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-03-26ALSA: hda - add headset mic detect quirks for three Dell laptopsHui Wang
When we plug a 3-ring headset on the Dell machines (VID: 0x10ec0255, SID: 0x10280632; VID: 0x10ec0293, SID: 0x1028062c; VID: 0x10ec0293, SID: 0x1028062e), the headset mic can't be detected, after apply this patch, the headset mic can work well. BugLink: https://bugs.launchpad.net/bugs/1297581 Cc: David Henningsson <david.henningsson@canonical.com> Cc: stable@vger.kernel.org Signed-off-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-03-25mtd: nand: fix GET/SET_FEATURES address on 16-bit devicesDavid Mosberger
GET_FEATURES and SET_FEATURES also need byte-addressing on 16-bit devices. Signed-off-by: David Mosberger <davidm@egauge.net> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-03-25mtd: omap2: Use devm_ioremap_resource()Jingoo Han
Use devm_ioremap_resource() in order to make the code simpler, and remove redundant return value check of platform_get_resource() because the value is checked by devm_ioremap_resource(). Also, 'unsigned long mem_size' is removed from 'struct omap_nand_info', because the 'mem_size' variable is not necessary anymore. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-03-25mtd: denali_dt: Use devm_ioremap_resource()Jingoo Han
Use devm_ioremap_resource() in order to make the code simpler, and remove redundant return value check of platform_get_resource_byname() because the value is checked by devm_ioremap_resource(). Signed-off-by: Jingoo Han <jg1.han@samsung.com> Tested-by: Dinh Nguyen <dinguyen@altera.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-03-25mtd: devices: elm: update DRIVER_NAME as "omap-elm"Pekon Gupta
use "omap-elm" as DRIVER_NAME Signed-off-by: Pekon Gupta <pekon@ti.com> Reviewed-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-03-25mtd: devices: elm: configure parallel channels based on ecc_stepsPekon Gupta
ELM hardware can process up to maximum of 8 hannels in parallel for ECC error detection. Currently the number of channels getting configured for processing is static determined by macro ERROR_VECTOR_MAX. However, the actual number of channels that need to be processed is the ECC step number. This patch just avoids configuring extra unused channels. Signed-off-by: Pekon Gupta <pekon@ti.com> Reviewed-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-03-25mtd: devices: elm: clean elm_load_syndromePekon Gupta
This patch refactors elm_load_syndrome() to make it scalable for newer ECC schemes by removing scheme specific macros (like ECC_BYTES*xx), and instead using ECC control information passed during elm_config. Signed-off-by: Pekon Gupta <pekon@ti.com> Reviewed-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-03-25mtd: devices: elm: check for hardware engine's design constraintsPekon Gupta
ELM hardware engine is used by BCH ecc-schemes for detecting and locating ECC errors. This patch adds the following checks for ELM hardware engine: - ELM internal buffers are of 1K, so it cannot process data with ecc-step-size > 1K. - ELM engine can execute upto maximum of 8 threads in parallel, so in *page-mode* (when complete page is processed in single iteration), ELM cannot support ecc-steps > 8. Signed-off-by: Pekon Gupta <pekon@ti.com> Reviewed-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-03-26Merge branch 'drm-nouveau-next' of ↵Dave Airlie
git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-next - first stage of (ongoing) gpu fault recovery work - initial support for maxwell (binary driver fw needed) - various random fixes across the board * 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6: (87 commits) drm/nouveau: fix missing newline drm/nouveau/bios: fetch the vbios from PROM using only aligned 32-bit accesses drm/nouveau/therm: let the vbios decide on the automatic fan management mode drm/nvd7/therm: handle another kind of PWM fans drm/nouveau/pm/fan: drop the fan lock in fan_update() before rescheduling drm/nouveau: fix small thinko in vblank timestamping. drm/nouveau/therm: check for sensor presence with requested mode, not current drm/nouveau/disp/dp: allow 540MHz data rate drm/nouveau: recognise higher link rate for available dp bw calculations drm/nouveau/disp: limit dp capabilities as per dcb drm/nva3/fbram: restrict training pattern setup to GT218 drm/nva3/devinit: restrict script access to some PFB regs drm/nouveau/devinit: add interface to check if a mmio access by scripts is ok drm/nouveau/bios: have strap reads show on devinit spam debug level drm/nv50/gpio: fixup reset for gpios >= 16 drm/nv50/gpio: exclude sense value from mask when changing registers drm/gk104/gr: therm magic needed on some kepler boards drm/gm107/gr: initial support drm/gf100-/gf: fix a stupid typo, waiting on wrong signal for mmctx drm/nouveau/bios: parsing of some random table needed to bring up gr ...
2014-03-26drm/nouveau: fix missing newlineAlexandre Courbot
Add a missing newline at the end of a DRM_INFO message. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-03-26drm/nouveau/bios: fetch the vbios from PROM using only aligned 32-bit accessesMartin Peres
Other kind of accesses are unreliable on Kepler cards. As advised by NVIDIA, let's only use 32-bit accesses to fetch the vbios from PROM. This fixes vbios fetching on my nve7 which failed in certain specific conditions. I suggest we Cc stable, for all kernels they still maintain after the big rewrite. Suggested-by: Christian Zander <czander@nvidia.com> Signed-off-by: Martin Peres <martin.peres@free.fr> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-03-26drm/nouveau/therm: let the vbios decide on the automatic fan management modeMartin Peres
This should fix automatic fan management on fermi cards who do not have 0x46 entries in the thermal table. On my nve6, the blob sets the default linear range from 40°C to 100°C but my nvcf's default values are 40°C to 85°C. Let's keep 85 as a default for everyone. Signed-off-by: Martin Peres <martin.peres@labri.fr> Tested-by: Timothée Ravier <tim@siosm.fr> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-03-26drm/nvd7/therm: handle another kind of PWM fansMartin Peres
This should fix fan management on many nvd7+ chipsets. Signed-off-by: Martin Peres <martin.peres@labri.fr> Tested-by: Timothée Ravier <tim@siosm.fr> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-03-26drm/nouveau/pm/fan: drop the fan lock in fan_update() before reschedulingMartin Peres
This should fix a deadlock that has been reported to us where fan_update() would hold the fan lock and try to grab the alarm_program_lock to reschedule an update. On an other CPU, the alarm_program_lock would have been taken before calling fan_update(), leading to a deadlock. We should Cc: <stable@vger.kernel.org> # 3.9+ Reported-by: Marcin Slusarz <marcin.slusarz@gmail.com> Tested-by: Timothée Ravier <tim@siosm.fr> Tested-by: Boris Fersing (IRC nick fersingb, no public email address) Signed-off-by: Martin Peres <martin.peres@free.fr> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-03-26drm/nouveau: fix small thinko in vblank timestamping.Mario Kleiner
*hpos horizontal scanout position doesn't need to be corrected to count the pixels between hactive end and htotal negative. That is only needed for *vpos to count lines until end of vblank for the vblank timestamping. Use hpos as is without correction. Removes occassional spikes in timestamps of up to 1 scanline duration, thereby improves accuracy to about +/- 2 usecs instead of +/- 12 usecs, wrt. true onset time as measured with high precision equipment on NV-A5. Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-03-26drm/nouveau/therm: check for sensor presence with requested mode, not currentBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-03-26drm/nouveau/disp/dp: allow 540MHz data rateIlia Mirkin
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76319 Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
generated by cgit (git 2.34.1) at 2025-09-23 10:38:34 +0000