summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-12-01drm/amd/display: Clear DPCD lane settings after repeater trainingShen, George
[Why] VS and PE requested by repeater should not persist for the sink. [How] Clear DPCD lane settings after repeater link training finishes. Reviewed-by: Wesley Chalmers <wesley.chalmers@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: George Shen <George.Shen@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-01drm/amd/display: Allow DSC on supported MST branch devicesNicholas Kazlauskas
[Why] When trying to lightup two 4k60 non-DSC displays behind a branch device that supports DSC we can't lightup both at once due to bandwidth limitations - each requires 48 VCPI slots but we only have 63. [How] The workaround already exists in the code but is guarded by a CONFIG that cannot be set by the user and shouldn't need to be. Check for specific branch device IDs to device whether to enable the workaround for multiple display scenarios. Reviewed-by: Hersen Wu <hersenxs.wu@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-12-01drm/amdgpu: Don't halt RLC on GFX suspendLijo Lazar
On aldebaran, RLC also controls GFXCLK. Skip halting RLC during GFX IP suspend and keep it running till PMFW disables all DPMs. [ 578.019986] amdgpu 0000:23:00.0: amdgpu: GPU reset begin! [ 583.245566] amdgpu 0000:23:00.0: amdgpu: Failed to disable smu features. [ 583.245621] amdgpu 0000:23:00.0: amdgpu: Fail to disable dpm features! [ 583.245639] [drm:amdgpu_device_ip_suspend_phase2 [amdgpu]] *ERROR* suspend of IP block <smu> failed -62 [ 583.248504] [drm] free PSP TMR buffer Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-01drm/amdgpu: fix the missed handling for SDMA2 and SDMA3Guchun Chen
There is no base reg offset or ip_version set for SDMA2 and SDMA3 on SIENNA_CICHLID, so add them. Signed-off-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Kevin Wang <kevinyang.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-01drm/amdgpu: check atomic flag to differeniate with legacy pathFlora Cui
since vkms support atomic KMS interface Signed-off-by: Flora Cui <flora.cui@amd.com> Reviewed-by: Guchun Chen <guchun.chen@amd.com> Acked-by: Alex Deucher <aleander.deucher@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-01drm/amdgpu: cancel the correct hrtimer on exitFlora Cui
Signed-off-by: Flora Cui <flora.cui@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-01drm/amdgpu/sriov/vcn: add new vcn ip revision check case for SIENNA_CICHLIDJane Jian
[WHY] for sriov odd# vf will modify vcn0 engine ip revision(due to multimedia bandwidth feature), which will be mismatched with original vcn0 revision [HOW] add new version check for vcn0 disabled revision(3, 0, 192), typically modified under sriov mode Signed-off-by: Jane Jian <Jane.Jian@amd.com> Reviewed-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-01iavf: restore MSI state on resetMitch Williams
If the PF experiences an FLR, the VF's MSI and MSI-X configuration will be conveniently and silently removed in the process. When this happens, reset recovery will appear to complete normally but no traffic will pass. The netdev watchdog will helpfully notify everyone of this issue. To prevent such public embarrassment, restore MSI configuration at every reset. For normal resets, this will do no harm, but for VF resets resulting from a PF FLR, this will keep the VF working. Fixes: 5eae00c57f5e ("i40evf: main driver core") Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-12-01drm/amdgpu/display: Only set vblank_disable_immediate when PSR is not enabledNicholas Kazlauskas
[Why] PSR currently relies on the kernel's delayed vblank on/off mechanism as an implicit bufferring mechanism to prevent excessive entry/exit. Without this delay the user experience is impacted since it can take a few frames to enter/exit. [How] Only allow vblank disable immediate for DC when psr is not supported. Leave a TODO indicating that this support should be extended in the future to delay independent of the vblank interrupt. Fixes: 92020e81ddbeac ("drm/amdgpu/display: set vblank_disable_immediate for DC") Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-01drm/i915: Add workaround numbers to GEN7_COMMON_SLICE_CHICKEN1 whitelistingJosé Roberto de Souza
Those two workarounds needs to be implemented in UMD, KMD only needs to whitelist the registers, so here only adding the workaround number to facilitate future workaroud table checks. Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211119140931.32791-2-jose.souza@intel.com
2021-12-01Revert "drm/i915: Implement Wa_1508744258"José Roberto de Souza
This workarounds are causing hangs, because I missed the fact that it needs to be enabled for all cases and disabled when doing a resolve pass. So KMD only needs to whitelist it and UMD will be the one setting it on per case. This reverts commit 28ec02c9cbebf3feeaf21a59df9dfbc02bda3362. Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/4145 Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Fixes: 28ec02c9cbeb ("drm/i915: Implement Wa_1508744258") Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211119140931.32791-1-jose.souza@intel.com
2021-12-01cpufreq: docs: Update core.rstTang Yizhou
As the definition of struct cpufreq_freqs has changed, update core.rst with the new first member of struct cpufreq_freqs. Signed-off-by: Tang Yizhou <tangyizhou@huawei.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-12-01cpufreq: Fix a comment in cpufreq_policy_freeTang Yizhou
Make the comment in blocking_notifier_call_chain() easier to understand. Signed-off-by: Tang Yizhou <tangyizhou@huawei.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-12-01powercap/drivers/dtpm: Disable DTPM at boot timeDaniel Lezcano
The DTPM framework misses a mechanism to set it up. That is currently under review but will come after the next cycle. As the distro are enabling all the kernel options, the DTPM framework is enabled on platforms where the energy model is not implemented, thus making the framework inconsistent and disrupting the CPU frequency scaling service. Remove the initialization at boot time as a hot fix. Fixes: 7a89d7eacf8e ("powercap/drivers/dtpm: Simplify the dtpm table") Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reported-By: Doug Smythies <dsmythies@telus.net> Tested-By: Doug Smythies <dsmythies@telus.net> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-12-01cpufreq: Fix get_cpu_device() failure in add_cpu_dev_symlink()Xiongfeng Wang
When I hot added a CPU, I found 'cpufreq' directory was not created below /sys/devices/system/cpu/cpuX/. It is because get_cpu_device() failed in add_cpu_dev_symlink(). cpufreq_add_dev() is the .add_dev callback of a CPU subsys interface. It will be called when the CPU device registered into the system. The call chain is as follows: register_cpu() ->device_register() ->device_add() ->bus_probe_device() ->cpufreq_add_dev() But only after the CPU device has been registered, we can get the CPU device by get_cpu_device(), otherwise it will return NULL. Since we already have the CPU device in cpufreq_add_dev(), pass it to add_cpu_dev_symlink(). I noticed that the 'kobj' of the CPU device has been added into the system before cpufreq_add_dev(). Fixes: 2f0ba790df51 ("cpufreq: Fix creation of symbolic links to policy directories") Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-12-01Merge tag 'sound-5.16-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "A collection of small fixes. A large series is found for ASoC tegra drivers to correct the control element handlings, while others are mostly for device-specific quirks and fix-ups" * tag 'sound-5.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (25 commits) ALSA: hda/hdmi: fix HDA codec entry table order for ADL-P ALSA: hda: Add Intel DG2 PCI ID and HDMI codec vid ALSA: hda/cs8409: Set PMSG_ON earlier inside cs8409 driver ASoC: SOF: hda: reset DAI widget before reconfiguring it ASoC: cs35l41: Set the max SPI speed for the whole device ALSA: intel-dsp-config: add quirk for CML devices based on ES8336 codec ASoC: Intel: soc-acpi: add entry for ESSX8336 on CML ASoC: rk817: Add module alias for rk817-codec ASoC: soc-acpi: Set mach->id field on comp_ids matches ASoC: tegra: Fix kcontrol put callback in Mixer ASoC: tegra: Fix kcontrol put callback in ADX ASoC: tegra: Fix kcontrol put callback in AMX ASoC: tegra: Fix kcontrol put callback in SFC ASoC: tegra: Fix kcontrol put callback in MVC ASoC: tegra: Fix kcontrol put callback in AHUB ASoC: tegra: Fix kcontrol put callback in DSPK ASoC: tegra: Fix kcontrol put callback in DMIC ASoC: tegra: Fix kcontrol put callback in I2S ASoC: tegra: Fix kcontrol put callback in ADMAIF ASoC: tegra: Fix wrong value type in MVC ...
2021-12-01drm/ttm: Clarify that the TTM_PL_SYSTEM is under TTMs controlZack Rusin
TTM takes full control over TTM_PL_SYSTEM placed buffers. This makes driver internal usage of TTM_PL_SYSTEM prone to errors because it requires the drivers to manually handle all interactions between TTM which can swap out those buffers whenever it thinks it's the right thing to do and driver. CPU buffers which need to be fenced and shared with accelerators should be placed in driver specific placements that can explicitly handle CPU/accelerator buffer fencing. Currently, apart, from things silently failing nothing is enforcing that requirement which means that it's easy for drivers and new developers to get this wrong. To avoid the confusion we can document this requirement and clarify the solution. This came up during a discussion on dri-devel: https://lore.kernel.org/dri-devel/232f45e9-8748-1243-09bf-56763e6668b3@amd.com Signed-off-by: Zack Rusin <zackr@vmware.com> Cc: Christian König <christian.koenig@amd.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211110145034.487512-1-zackr@vmware.com
2021-12-01drm/vmwgfx: Switch the internal BO's to ttm_bo_type_kernelZack Rusin
There's never a need to access our internal kernel bo's from user-space. Those objects are used exclusively for internal support to guest backed surfaces (in otable setup and mob page tables) and there's no need to have them be of device type, i.e. mmappable from user-space. Signed-off-by: Zack Rusin <zackr@vmware.com> Reviewed-by: Martin Krastev <krastevm@vmware.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211105193845.258816-6-zackr@vmware.com
2021-12-01drm/vmwgfx: Introduce a new placement for MOB page tablesZack Rusin
For larger (bigger than a page) and noncontiguous mobs we have to create page tables that allow the host to find the memory. Those page tables just used regular system memory. Unfortunately in TTM those BO's are not allowed to be busy thus can't be fenced and we have to fence those bo's because we don't want to destroy the page tables while the host is still executing the command buffers which might be accessing them. To solve it we introduce a new placement VMW_PL_SYSTEM which is very similar to TTM_PL_SYSTEM except that it allows fencing. This fixes kernel oops'es during unloading of the driver (and pci hot remove/add) which were caused by busy BO's in TTM_PL_SYSTEM being present in the delayed deletion list in TTM (TTM_PL_SYSTEM manager is destroyed before the delayed deletions are executed) Signed-off-by: Zack Rusin <zackr@vmware.com> Reviewed-by: Martin Krastev <krastevm@vmware.com> Cc: Christian König <christian.koenig@amd.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211105193845.258816-5-zackr@vmware.com
2021-12-01drm/vmwgfx: Fail to initialize on broken configsZack Rusin
Some of our hosts have a bug where rescaning a pci bus results in stale fifo memory being mapped on the host. This makes any fifo communication impossible resulting in various kernel crashes. Instead of unexpectedly crashing, predictably fail to load the driver which will preserve the system. Fixes: fb1d9738ca05 ("drm/vmwgfx: Add DRM driver for VMware Virtual GPU") Signed-off-by: Zack Rusin <zackr@vmware.com> Reviewed-by: Martin Krastev <krastevm@vmware.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211105193845.258816-4-zackr@vmware.com
2021-12-01drm/vmwgfx: Release ttm memory if probe failsZack Rusin
The ttm mem global state was leaking if the vmwgfx driver load failed. In case of a driver load failure we have to make sure we also release the ttm mem global state. Signed-off-by: Zack Rusin <zackr@vmware.com> Reviewed-by: Martin Krastev <krastevm@vmware.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211105193845.258816-3-zackr@vmware.com
2021-12-01drm/vmwgfx: Remove the deprecated lower mem limitZack Rusin
TTM during the transition to the new page allocator lost the ability to constrain the allocations via the lower_mem_limit. The code has been unused since the change: 256dd44bd897 ("drm/ttm: nuke old page allocator") and there's no reason to keep it. Fixes: 256dd44bd897 ("drm/ttm: nuke old page allocator") Signed-off-by: Zack Rusin <zackr@vmware.com> Reviewed-by: Martin Krastev <krastevm@vmware.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211105193845.258816-2-zackr@vmware.com
2021-12-01drm/i915: Update error capture code to avoid using the current vma stateThomas Hellström
With asynchronous migrations, the vma state may be several migrations ahead of the state that matches the request we're capturing. Address that by introducing an i915_vma_snapshot structure that can be used to snapshot relevant state at request submission. In order to make sure we access the correct memory, the snapshots take references on relevant sg-tables and memory regions. Also move the capture list allocation out of the fence signaling critical path and use the CONFIG_DRM_I915_CAPTURE_ERROR define to avoid compiling in members and functions used for error capture when they're not used. Finally, Introduce lockdep annotation. v4: - Break out the capture allocation mode change to a separate patch. v5: - Fix compilation error in the !CONFIG_DRM_I915_CAPTURE_ERROR case (kernel test robot) v6: - Use #if IS_ENABLED() instead of #ifdef to match driver style. - Move yet another change of allocation mode to the separate patch. - Commit message rework due to patch reordering. v7: - Adjust for removal of region refcounting. Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Reviewed-by: Ramalingam C <ramalingam.c@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211129202245.472043-1-thomas.hellstrom@linux.intel.com
2021-12-01Merge tag 'wireless-drivers-2021-12-01' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for v5.16 First set of fixes for v5.16. Mostly crash and driver initialisation fixes, the fix for rtw89 being most important. iwlwifi * compiler, lockdep and smatch warning fixes * fix for a rare driver initialisation failure * fix a memory leak rtw89 * fix const buffer modification causing a kernel crash mt76 * fix null pointer access * fix idr leak rt2x00 * fix driver initialisation errors, a regression since v5.2-rc1 ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-01Merge tag 'mlx5-fixes-2021-11-30' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5 fixes 2021-11-30 This series provides bug fixes to mlx5 driver. Please pull and let me know if there is any problem. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-01Merge branch 'mv88e6xxx-fixes'David S. Miller
Marek Behún says: ==================== mv88e6xxx fixes (mainly 88E6393X family) sending v2 of these fixes. Original cover letter: So I managed to discovered how to fix inband AN for 2500base-x mode on 88E6393x (Amethyst) family. This series fixes application of erratum 4.8, adds fix for erratum 5.2, adds support for completely disablign SerDes receiver / transmitter, fixes inband AN for 2500base-x mode by using 1000base-x mode and simply changing frequeny to 3.125 GHz, all this for 88E6393X. The last commit fixes linking when link partner has AN disabled and the device invokes the AN bypass feature. Currently we fail to link in this case. Changes since v1: - fixed wrong operator in patch 3 (thanks Russell) - added more comments about why BMCR_ANENABLE is used in patch 6 (thanks Russell) - updated some return statements from if (something) return func(); return 0; to if (something) err = func(); return err; (err is set to 0 before the condition) ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-01net: dsa: mv88e6xxx: Link in pcs_get_state() if AN is bypassedMarek Behún
Function mv88e6xxx_serdes_pcs_get_state() currently does not report link up if AN is enabled, Link bit is set, but Speed and Duplex Resolved bit is not set, which testing shows is the case for when auto-negotiation was bypassed (we have AN enabled but link partner does not). An example of such link partner is Marvell 88X3310 PHY, when put into the mode where host interface changes between 10gbase-r, 5gbase-r, 2500base-x and sgmii according to copper speed. The 88X3310 does not enable AN in 2500base-x, and so SerDes on mv88e6xxx currently does not link with it. Fix this. Fixes: a5a6858b793f ("net: dsa: mv88e6xxx: extend phylink to Serdes PHYs") Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-01net: dsa: mv88e6xxx: Fix inband AN for 2500base-x on 88E6393X familyMarek Behún
Inband AN is broken on Amethyst in 2500base-x mode when set by standard mechanism (via cmode). (There probably is some weird setting done by default in the switch for this mode that make it cycle in some state or something, because when the peer is the mvneta controller, it receives link change interrupts every ~0.3ms, but the link is always down.) Get around this by configuring the PCS mode to 1000base-x (where inband AN works), and then changing the SerDes frequency while SerDes transmitter and receiver are disabled, before enabling SerDes PHY. After disabling SerDes PHY, change the PCS mode back to 2500base-x, to avoid confusing the device (if we leave it at 1000base-x PCS mode but with different frequency, and then change cmode to sgmii, the device won't change the frequency because it thinks it already has the correct one). The register which changes the frequency is undocumented. I discovered it by going through all registers in the ranges 4.f000-4.f100 and 1e.8000-1e.8200 for all SerDes cmodes (sgmii, 1000base-x, 2500base-x, 5gbase-r, 10gbase-r, usxgmii) and filtering out registers that didn't make sense (the value was the same for modes which have different frequency). The result of this was: reg sgmii 1000base-x 2500base-x 5gbase-r 10gbase-r usxgmii 04.f002 005b 0058 0059 005c 005d 005f 04.f076 3000 0000 1000 4000 5000 7000 04.f07c 0950 0950 1850 0550 0150 0150 1e.8000 0059 0059 0058 0055 0051 0051 1e.8140 0e20 0e20 0e28 0e21 0e42 0e42 Register 04.f002 is the documented Port Operational Confiuration register, it's last 3 bits select PCS type, so changing this register also changes the frequency to the appropriate value. Registers 04.f076 and 04.f07c are not writable. Undocumented register 1e.8000 was the one: changing bits 3:0 from 9 to 8 changed SerDes frequency to 3.125 GHz, while leaving the value of PCS mode in register 04.f002.2:0 at 1000base-x. Inband autonegotiation started working correctly. (I didn't try anything with register 1e.8140 since 1e.8000 solved the problem.) Since I don't have documentation for this register 1e.8000.3:0, I am using the constants without names, but my hypothesis is that this register selects PHY frequency. If in the future I have access to an oscilloscope able to handle these frequencies, I will try to test this hypothesis. Fixes: de776d0d316f ("net: dsa: mv88e6xxx: add support for mv88e6393x family") Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-01net: dsa: mv88e6xxx: Add fix for erratum 5.2 of 88E6393X familyMarek Behún
Add fix for erratum 5.2 of the 88E6393X (Amethyst) family: for 10gbase-r mode, some undocumented registers need to be written some special values. Fixes: de776d0d316f ("net: dsa: mv88e6xxx: add support for mv88e6393x family") Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-01net: dsa: mv88e6xxx: Save power by disabling SerDes trasmitter and receiverMarek Behún
Save power on 88E6393X by disabling SerDes receiver and transmitter after SerDes is SerDes is disabled. Signed-off-by: Marek Behún <kabel@kernel.org> Cc: stable@vger.kernel.org # de776d0d316f ("net: dsa: mv88e6xxx: add support for mv88e6393x family") Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-01net: dsa: mv88e6xxx: Drop unnecessary check in mv88e6393x_serdes_erratum_4_6()Marek Behún
The check for lane is unnecessary, since the function is called only with allowed lane argument. Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-01net: dsa: mv88e6xxx: Fix application of erratum 4.8 for 88E6393XMarek Behún
According to SERDES scripts for 88E6393X, erratum 4.8 has to be applied every time before SerDes is powered on. Split the code for erratum 4.8 into separate function and call it in mv88e6393x_serdes_power(). Fixes: de776d0d316f ("net: dsa: mv88e6xxx: add support for mv88e6393x family") Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-01drm/i915/dp: Perform 30ms delay after source OUI writeLyude Paul
While working on supporting the Intel HDR backlight interface, I noticed that there's a couple of laptops that will very rarely manage to boot up without detecting Intel HDR backlight support - even though it's supported on the system. One example of such a laptop is the Lenovo P17 1st generation. Following some investigation Ville Syrjälä did through the docs they have available to them, they discovered that there's actually supposed to be a 30ms wait after writing the source OUI before we begin setting up the rest of the backlight interface. This seems to be correct, as adding this 30ms delay seems to have completely fixed the probing issues I was previously seeing. So - let's start performing a 30ms wait after writing the OUI, which we do in a manner similar to how we keep track of PPS delays (e.g. record the timestamp of the OUI write, and then wait for however many ms are left since that timestamp right before we interact with the backlight) in order to avoid waiting any longer then we need to. As well, this also avoids us performing this delay on systems where we don't end up using the HDR backlight interface. V3: * Move last_oui_write into intel_dp V2: * Move panel delays into intel_pps Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Fixes: 4a8d79901d5b ("drm/i915/dp: Enable Intel's HDR backlight interface (only SDR for now)") Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: <stable@vger.kernel.org> # v5.12+ Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211130212912.212044-1-lyude@redhat.com (cherry picked from commit c7c90b0b8418a97d3aa8b39aae1992908948efad) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2021-12-01ASoC: codecs: wsa881x: fix return values from kcontrol putSrinivas Kandagatla
wsa881x_set_port() and wsa881x_put_pa_gain() currently returns zero eventhough it changes the value. Fix this, so that change notifications are sent correctly. Fixes: a0aab9e1404a ("ASoC: codecs: add wsa881x amplifier support") Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20211130160507.22180-5-srinivas.kandagatla@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2021-12-01ASoC: codecs: wcd934x: return correct value from mixer putSrinivas Kandagatla
wcd934x_compander_set() currently returns zero eventhough it changes the value. Fix this, so that change notifications are sent correctly. Fixes: 1cde8b822332 ("ASoC: wcd934x: add basic controls") Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20211130160507.22180-4-srinivas.kandagatla@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2021-12-01ASoC: codecs: wcd934x: handle channel mappping list correctlySrinivas Kandagatla
Currently each channel is added as list to dai channel list, however there is danger of adding same channel to multiple dai channel list which endups corrupting the other list where its already added. This patch ensures that the channel is actually free before adding to the dai channel list and also ensures that the channel is on the list before deleting it. This check was missing previously, and we did not hit this issue as we were testing very simple usecases with sequence of amixer commands. Fixes: a70d9245759a ("ASoC: wcd934x: add capture dapm widgets") Fixes: dd9eb19b5673 ("ASoC: wcd934x: add playback dapm widgets") Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20211130160507.22180-2-srinivas.kandagatla@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2021-12-01ASoC: qdsp6: q6routing: Fix return value from msm_routing_put_audio_mixerSrinivas Kandagatla
msm_routing_put_audio_mixer() can return incorrect value in various scenarios. scenario 1: amixer cset iface=MIXER,name='SLIMBUS_0_RX Audio Mixer MultiMedia1' 1 amixer cset iface=MIXER,name='SLIMBUS_0_RX Audio Mixer MultiMedia1' 0 return value is 0 instead of 1 eventhough value was changed scenario 2: amixer cset iface=MIXER,name='SLIMBUS_0_RX Audio Mixer MultiMedia1' 1 amixer cset iface=MIXER,name='SLIMBUS_0_RX Audio Mixer MultiMedia1' 1 return value is 1 instead of 0 eventhough the value was not changed scenario 3: amixer cset iface=MIXER,name='SLIMBUS_0_RX Audio Mixer MultiMedia1' 0 return value is 1 instead of 0 eventhough the value was not changed Fix this by adding checks, so that change notifications are sent correctly. Fixes: e3a33673e845 ("ASoC: qdsp6: q6routing: Add q6routing driver") Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20211130163110.5628-1-srinivas.kandagatla@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2021-12-01dma-buf: system_heap: Use 'for_each_sgtable_sg' in pages free flowGuangming
For previous version, it uses 'sg_table.nent's to traverse sg_table in pages free flow. However, 'sg_table.nents' is reassigned in 'dma_map_sg', it means the number of created entries in the DMA adderess space. So, use 'sg_table.nents' in pages free flow will case some pages can't be freed. Here we should use sg_table.orig_nents to free pages memory, but use the sgtable helper 'for each_sgtable_sg'(, instead of the previous rather common helper 'for_each_sg' which maybe cause memory leak) is much better. Fixes: d963ab0f15fb0 ("dma-buf: system_heap: Allocate higher order pages if available") Signed-off-by: Guangming <Guangming.Cao@mediatek.com> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Cc: <stable@vger.kernel.org> # 5.11.* Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20211126074904.88388-1-guangming.cao@mediatek.com
2021-12-01drm/i915/gem: Fix a NULL pointer dereference in igt_request_rewind()Zhou Qingyang
In igt_request_rewind(), mock_context(i915, "A") is assigned to ctx[0] and used in i915_gem_context_get_engine(). There is a dereference of ctx[0] in i915_gem_context_get_engine(), which could lead to a NULL pointer dereference on failure of mock_context(i915, "A") . So as mock_context(i915, "B"). Although this bug is not serious for it belongs to testing code, it is better to be fixed to avoid unexpected failure in testing. Fix this bugs by adding checks about ctx[0] and ctx[1]. This bug was found by a static analyzer. The analysis employs differential checking to identify inconsistent security operations (e.g., checks or kfrees) between two code paths and confirms that the inconsistent operations are not recovered in the current function or the callers, so they constitute bugs. Note that, as a bug found by static analysis, it can be a false positive or hard to trigger. Multiple researchers have cross-reviewed the bug. Builds with CONFIG_DRM_I915_SELFTEST=y show no new warnings, and our static analyzer no longer warns about this code. References: 591c0fb85d1c ("drm/i915: Exercise request cancellation using a mock selftest") [tursulin: Replaced fixes with references to avoid.] Signed-off-by: Zhou Qingyang <zhou1615@umn.edu> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211130141545.153899-1-zhou1615@umn.edu
2021-12-01drm/i915: Use per device iommu checkTvrtko Ursulin
With both integrated and discrete Intel GPUs in a system, the current global check of intel_iommu_gfx_mapped, as done from intel_vtd_active() may not be completely accurate. In this patch we add i915 parameter to intel_vtd_active() in order to prepare it for multiple GPUs and we also change the check away from Intel specific intel_iommu_gfx_mapped (global exported by the Intel IOMMU driver) to probing the presence of IOMMU on a specific device using device_iommu_mapped(). This will return true both for IOMMU pass-through and address translation modes which matches the current behaviour. If in the future we wanted to distinguish between these two modes we could either use iommu_get_domain_for_dev() and check for __IOMMU_DOMAIN_PAGING bit indicating address translation, or ask for a new API to be exported from the IOMMU core code. v2: * Check for dmar translation specifically, not just iommu domain. (Baolu) v3: * Go back to plain "any domain" check for now, rewrite commit message. v4: * Use device_iommu_mapped. (Robin, Baolu) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Lu Baolu <baolu.lu@linux.intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Robin Murphy <robin.murphy@arm.com> Acked-by: Robin Murphy <robin.murphy@arm.com> Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211126141424.493753-1-tvrtko.ursulin@linux.intel.com
2021-12-01drm/i915/dp: Perform 30ms delay after source OUI writeLyude Paul
While working on supporting the Intel HDR backlight interface, I noticed that there's a couple of laptops that will very rarely manage to boot up without detecting Intel HDR backlight support - even though it's supported on the system. One example of such a laptop is the Lenovo P17 1st generation. Following some investigation Ville Syrjälä did through the docs they have available to them, they discovered that there's actually supposed to be a 30ms wait after writing the source OUI before we begin setting up the rest of the backlight interface. This seems to be correct, as adding this 30ms delay seems to have completely fixed the probing issues I was previously seeing. So - let's start performing a 30ms wait after writing the OUI, which we do in a manner similar to how we keep track of PPS delays (e.g. record the timestamp of the OUI write, and then wait for however many ms are left since that timestamp right before we interact with the backlight) in order to avoid waiting any longer then we need to. As well, this also avoids us performing this delay on systems where we don't end up using the HDR backlight interface. V3: * Move last_oui_write into intel_dp V2: * Move panel delays into intel_pps Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Fixes: 4a8d79901d5b ("drm/i915/dp: Enable Intel's HDR backlight interface (only SDR for now)") Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: <stable@vger.kernel.org> # v5.12+ Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211130212912.212044-1-lyude@redhat.com
2021-11-30net/mlx5e: SHAMPO, Fix constant expression resultBen Ben-Ishay
mlx5e_build_shampo_hd_umr uses counters i and index incorrectly as unsigned, thus the err state err_unmap could stuck in endless loop. Change i to int to solve the first issue. Reduce index check to solve the second issue, the caller function validates that index could not rotate. Fixes: 64509b052525 ("net/mlx5e: Add data path for SHAMPO feature") Signed-off-by: Ben Ben-Ishay <benishay@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-11-30net/mlx5: Fix access to a non-supported registerAya Levin
Validate MRTC register is supported before triggering a delayed work which accesses it. Fixes: 5a1023deeed0 ("net/mlx5: Add periodic update of host time to firmware") Signed-off-by: Aya Levin <ayal@nvidia.com> Reviewed-by: Gal Pressman <gal@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-11-30net/mlx5: Fix too early queueing of log timestamp workGal Pressman
The log timestamp work should not be queued before the command interface is initialized, move it to a later stage in the init flow. Fixes: 5a1023deeed0 ("net/mlx5: Add periodic update of host time to firmware") Signed-off-by: Gal Pressman <gal@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-11-30net/mlx5: Fix use after free in mlx5_health_wait_pci_upAmir Tzin
The device health recovery flow calls mlx5_health_wait_pci_up() which queries the device for FW_RESET timeout after freeing the device timeouts structure on mlx5_function_teardown(). Fix this bug by moving timeouts structure init/cleanup to the device's init/uninit phases. Since it is necessary to reset default software timeouts on function reload, extract setting of defaults values from mlx5_tout_init() and call mlx5_tout_set_def_val() directly from mlx5_function_setup(). Fixes: 5945e1adeab5 ("net/mlx5: Read timeout values from init segment") Reported by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Amir Tzin <amirtz@nvidia.com> Signed-off-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-11-30net/mlx5: E-Switch, Use indirect table only if all destinations support itMaor Dickman
When adding rule with multiple destinations, indirect table is used for all of the destinations if at least one of the destinations support it, this can cause creation of invalid indirect tables for the destinations that doesn't support it. Fixed it by using indirect table only if all destinations support it. Fixes: a508728a4c8b ("net/mlx5e: VF tunnel RX traffic offloading") Signed-off-by: Maor Dickman <maord@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-11-30net/mlx5: E-Switch, Check group pointer before reading bw_share valueDmytro Linkin
If log_esw_max_sched_depth is not supported group pointer of the vport is NULL. Hence, check the pointer before reading bw_share value. Fixes: 0fe132eac38c ("net/mlx5: E-switch, Allow to add vports to rate groups") Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-11-30net/mlx5: E-Switch, fix single FDB creation on BlueFieldMark Bloch
Always use MLX5_FLOW_TABLE_OTHER_VPORT flag when creating egress ACL table for single FDB. Not doing so on BlueField will make firmware fail the command. On BlueField the E-Switch manager is the ECPF (vport 0xFFFE) which is filled in the flow table creation command but as the other_vport field wasn't set the firmware complains about a bad parameter. This is different from a regular HCA where the E-Switch manager vport is the PF (vport 0x0). Passing MLX5_FLOW_TABLE_OTHER_VPORT will make the firmware happy both on BlueField and on regular HCAs without special condition for each. This fixes the bellow firmware syndrome: mlx5_cmd_check:819:(pid 571): CREATE_FLOW_TABLE(0x930) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0x754a4) Fixes: db202995f503 ("net/mlx5: E-Switch, add logic to enable shared FDB") Signed-off-by: Mark Bloch <mbloch@nvidia.com> Reviewed-by: Maor Gottlieb <maorg@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-11-30net/mlx5: E-switch, Respect BW share of the new groupDmytro Linkin
To enable transmit schduler on vport FW require non-zero configuration for vport's TSAR. If vport added to the group which has configured BW share value and TX rate values of the vport are zero, then scheduler wouldn't be enabled on this vport. Fix that by calling BW normalization if BW share of the new group is configured. Fixes: 0fe132eac38c ("net/mlx5: E-switch, Allow to add vports to rate groups") Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-11-30net/mlx5: Lag, Fix recreation of VF LAGMaor Gottlieb
Driver needs to nullify the port select attributes of the LAG when port selection is destroyed, otherwise it breaks recreation of the LAG. It fixes the below kernel oops: [ 587.906377] BUG: kernel NULL pointer dereference, address: 0000000000000008 [ 587.908843] #PF: supervisor read access in kernel mode [ 587.910730] #PF: error_code(0x0000) - not-present page [ 587.912580] PGD 0 P4D 0 [ 587.913632] Oops: 0000 [#1] SMP PTI [ 587.914644] CPU: 5 PID: 165 Comm: kworker/u20:5 Tainted: G OE 5.9.0_mlnx #1 [ 587.916152] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 587.918332] Workqueue: mlx5_lag mlx5_do_bond_work [mlx5_core] [ 587.919479] RIP: 0010:mlx5_del_flow_rules+0x10/0x270 [mlx5_core] [ 587.920568] mlx5_core 0000:08:00.1 enp8s0f1: Link up [ 587.920680] Code: c0 09 80 a0 e8 cf 42 a4 e0 48 c7 c3 f4 ff ff ff e8 8a 88 dd e0 e9 ab fe ff ff 0f 1f 44 00 00 41 56 41 55 49 89 fd 41 54 55 53 <48> 8b 47 08 48 8b 68 28 48 85 ed 74 2e 48 8d 7d 38 e8 6a 64 34 e1 [ 587.925116] bond0: (slave enp8s0f1): Enslaving as an active interface with an up link [ 587.930415] RSP: 0018:ffffc9000048fd88 EFLAGS: 00010282 [ 587.930417] RAX: ffff88846c14fac0 RBX: ffff88846cddcb80 RCX: 0000000080400007 [ 587.930417] RDX: 0000000080400008 RSI: ffff88846cddcb80 RDI: 0000000000000000 [ 587.930419] RBP: ffff88845fd80140 R08: 0000000000000001 R09: ffffffffa074ba00 [ 587.938132] R10: ffff88846c14fec0 R11: 0000000000000001 R12: ffff88846c122f10 [ 587.939473] R13: 0000000000000000 R14: 0000000000000001 R15: ffff88846d7a0000 [ 587.940800] FS: 0000000000000000(0000) GS:ffff88846fa80000(0000) knlGS:0000000000000000 [ 587.942416] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 587.943536] CR2: 0000000000000008 CR3: 000000000240a002 CR4: 0000000000770ee0 [ 587.944904] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 587.946308] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 587.947639] PKRU: 55555554 [ 587.948236] Call Trace: [ 587.948834] mlx5_lag_destroy_definer.isra.3+0x16/0x90 [mlx5_core] [ 587.950033] mlx5_lag_destroy_definers+0x5b/0x80 [mlx5_core] [ 587.951128] mlx5_deactivate_lag+0x6e/0x80 [mlx5_core] [ 587.952146] mlx5_do_bond+0x150/0x450 [mlx5_core] [ 587.953086] mlx5_do_bond_work+0x3e/0x50 [mlx5_core] [ 587.954086] process_one_work+0x1eb/0x3e0 [ 587.954899] worker_thread+0x2d/0x3c0 [ 587.955656] ? process_one_work+0x3e0/0x3e0 [ 587.956493] kthread+0x115/0x130 [ 587.957174] ? kthread_park+0x90/0x90 [ 587.957929] ret_from_fork+0x1f/0x30 [ 587.973055] ---[ end trace 71ccd6eca89f5513 ]--- Fixes: b7267869e923 ("net/mlx5: Lag, add support to create/destroy/modify port selection") Signed-off-by: Maor Gottlieb <maorg@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
generated by cgit (git 2.34.1) at 2025-09-18 05:00:05 +0000