summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-09-03usbnet: modern method to get random MACOliver Neukum
The driver generates a random MAC once on load and uses it over and over, including on two devices needing a random MAC at the same time. Jakub suggested revamping the driver to the modern API for setting a random MAC rather than fixing the old stuff. The bug is as old as the driver. Signed-off-by: Oliver Neukum <oneukum@suse.com> Reviewed-by: Simon Horman <horms@kernel.org> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Link: https://patch.msgid.link/20240829175201.670718-1-oneukum@suse.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-03MAINTAINERS: wifi: cw1200: add net-cw1200.hSimon Horman
This is part of an effort [1] to assign a section in MAINTAINERS to header files that relate to Networking. In this case the files with "net" in their name. [1] https://lore.kernel.org/netdev/20240821-net-mnt-v2-0-59a5af38e69d@kernel.org/ It seems that net-cw1200.h is part of the CW1200 WLAN driver and this it is appropriate to add it to the section for that driver. Signed-off-by: Simon Horman <horms@kernel.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20240902-wifi-mnt-v2-1-f5ad1f36e993@kernel.org
2024-09-03btrfs: fix race between direct IO write and fsync when using same fdFilipe Manana
If we have 2 threads that are using the same file descriptor and one of them is doing direct IO writes while the other is doing fsync, we have a race where we can end up either: 1) Attempt a fsync without holding the inode's lock, triggering an assertion failures when assertions are enabled; 2) Do an invalid memory access from the fsync task because the file private points to memory allocated on stack by the direct IO task and it may be used by the fsync task after the stack was destroyed. The race happens like this: 1) A user space program opens a file descriptor with O_DIRECT; 2) The program spawns 2 threads using libpthread for example; 3) One of the threads uses the file descriptor to do direct IO writes, while the other calls fsync using the same file descriptor. 4) Call task A the thread doing direct IO writes and task B the thread doing fsyncs; 5) Task A does a direct IO write, and at btrfs_direct_write() sets the file's private to an on stack allocated private with the member 'fsync_skip_inode_lock' set to true; 6) Task B enters btrfs_sync_file() and sees that there's a private structure associated to the file which has 'fsync_skip_inode_lock' set to true, so it skips locking the inode's VFS lock; 7) Task A completes the direct IO write, and resets the file's private to NULL since it had no prior private and our private was stack allocated. Then it unlocks the inode's VFS lock; 8) Task B enters btrfs_get_ordered_extents_for_logging(), then the assertion that checks the inode's VFS lock is held fails, since task B never locked it and task A has already unlocked it. The stack trace produced is the following: assertion failed: inode_is_locked(&inode->vfs_inode), in fs/btrfs/ordered-data.c:983 ------------[ cut here ]------------ kernel BUG at fs/btrfs/ordered-data.c:983! Oops: invalid opcode: 0000 [#1] PREEMPT SMP PTI CPU: 9 PID: 5072 Comm: worker Tainted: G U OE 6.10.5-1-default #1 openSUSE Tumbleweed 69f48d427608e1c09e60ea24c6c55e2ca1b049e8 Hardware name: Acer Predator PH315-52/Covini_CFS, BIOS V1.12 07/28/2020 RIP: 0010:btrfs_get_ordered_extents_for_logging.cold+0x1f/0x42 [btrfs] Code: 50 d6 86 c0 e8 (...) RSP: 0018:ffff9e4a03dcfc78 EFLAGS: 00010246 RAX: 0000000000000054 RBX: ffff9078a9868e98 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff907dce4a7800 RDI: ffff907dce4a7800 RBP: ffff907805518800 R08: 0000000000000000 R09: ffff9e4a03dcfb38 R10: ffff9e4a03dcfb30 R11: 0000000000000003 R12: ffff907684ae7800 R13: 0000000000000001 R14: ffff90774646b600 R15: 0000000000000000 FS: 00007f04b96006c0(0000) GS:ffff907dce480000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f32acbfc000 CR3: 00000001fd4fa005 CR4: 00000000003726f0 Call Trace: <TASK> ? __die_body.cold+0x14/0x24 ? die+0x2e/0x50 ? do_trap+0xca/0x110 ? do_error_trap+0x6a/0x90 ? btrfs_get_ordered_extents_for_logging.cold+0x1f/0x42 [btrfs bb26272d49b4cdc847cf3f7faadd459b62caee9a] ? exc_invalid_op+0x50/0x70 ? btrfs_get_ordered_extents_for_logging.cold+0x1f/0x42 [btrfs bb26272d49b4cdc847cf3f7faadd459b62caee9a] ? asm_exc_invalid_op+0x1a/0x20 ? btrfs_get_ordered_extents_for_logging.cold+0x1f/0x42 [btrfs bb26272d49b4cdc847cf3f7faadd459b62caee9a] ? btrfs_get_ordered_extents_for_logging.cold+0x1f/0x42 [btrfs bb26272d49b4cdc847cf3f7faadd459b62caee9a] btrfs_sync_file+0x21a/0x4d0 [btrfs bb26272d49b4cdc847cf3f7faadd459b62caee9a] ? __seccomp_filter+0x31d/0x4f0 __x64_sys_fdatasync+0x4f/0x90 do_syscall_64+0x82/0x160 ? do_futex+0xcb/0x190 ? __x64_sys_futex+0x10e/0x1d0 ? switch_fpu_return+0x4f/0xd0 ? syscall_exit_to_user_mode+0x72/0x220 ? do_syscall_64+0x8e/0x160 ? syscall_exit_to_user_mode+0x72/0x220 ? do_syscall_64+0x8e/0x160 ? syscall_exit_to_user_mode+0x72/0x220 ? do_syscall_64+0x8e/0x160 ? syscall_exit_to_user_mode+0x72/0x220 ? do_syscall_64+0x8e/0x160 entry_SYSCALL_64_after_hwframe+0x76/0x7e Another problem here is if task B grabs the private pointer and then uses it after task A has finished, since the private was allocated in the stack of task A, it results in some invalid memory access with a hard to predict result. This issue, triggering the assertion, was observed with QEMU workloads by two users in the Link tags below. Fix this by not relying on a file's private to pass information to fsync that it should skip locking the inode and instead pass this information through a special value stored in current->journal_info. This is safe because in the relevant section of the direct IO write path we are not holding a transaction handle, so current->journal_info is NULL. The following C program triggers the issue: $ cat repro.c /* Get the O_DIRECT definition. */ #ifndef _GNU_SOURCE #define _GNU_SOURCE #endif #include <stdio.h> #include <stdlib.h> #include <unistd.h> #include <stdint.h> #include <fcntl.h> #include <errno.h> #include <string.h> #include <pthread.h> static int fd; static ssize_t do_write(int fd, const void *buf, size_t count, off_t offset) { while (count > 0) { ssize_t ret; ret = pwrite(fd, buf, count, offset); if (ret < 0) { if (errno == EINTR) continue; return ret; } count -= ret; buf += ret; } return 0; } static void *fsync_loop(void *arg) { while (1) { int ret; ret = fsync(fd); if (ret != 0) { perror("Fsync failed"); exit(6); } } } int main(int argc, char *argv[]) { long pagesize; void *write_buf; pthread_t fsyncer; int ret; if (argc != 2) { fprintf(stderr, "Use: %s <file path>\n", argv[0]); return 1; } fd = open(argv[1], O_WRONLY | O_CREAT | O_TRUNC | O_DIRECT, 0666); if (fd == -1) { perror("Failed to open/create file"); return 1; } pagesize = sysconf(_SC_PAGE_SIZE); if (pagesize == -1) { perror("Failed to get page size"); return 2; } ret = posix_memalign(&write_buf, pagesize, pagesize); if (ret) { perror("Failed to allocate buffer"); return 3; } ret = pthread_create(&fsyncer, NULL, fsync_loop, NULL); if (ret != 0) { fprintf(stderr, "Failed to create writer thread: %d\n", ret); return 4; } while (1) { ret = do_write(fd, write_buf, pagesize, 0); if (ret != 0) { perror("Write failed"); exit(5); } } return 0; } $ mkfs.btrfs -f /dev/sdi $ mount /dev/sdi /mnt/sdi $ timeout 10 ./repro /mnt/sdi/foo Usually the race is triggered within less than 1 second. A test case for fstests will follow soon. Reported-by: Paulo Dias <paulo.miguel.dias@gmail.com> Link: https://bugzilla.kernel.org/show_bug.cgi?id=219187 Reported-by: Andreas Jahn <jahn-andi@web.de> Link: https://bugzilla.kernel.org/show_bug.cgi?id=219199 Reported-by: syzbot+4704b3cc972bd76024f1@syzkaller.appspotmail.com Link: https://lore.kernel.org/linux-btrfs/00000000000044ff540620d7dee2@google.com/ Fixes: 939b656bc8ab ("btrfs: fix corruption after buffer fault in during direct IO append write") CC: stable@vger.kernel.org # 5.15+ Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2024-09-03Merge tag 'ath-current-20240903' of ↵Kalle Valo
git://git.kernel.org/pub/scm/linux/kernel/git/ath/ath ath.git patches for v6.11-rc7 We have three patch which address two issues in the ath11k driver which should be addressed for 6.11-rc7: One patch fixes a NULL pointer dereference while parsing transmit power envelope (TPE) information, and the other two patches revert the hibernation support since it is interfering with suspend on some platforms. Note the cause of the suspend wakeups is still being investigated, and it is hoped this can be addressed and hibernation support can be restored in the near future.
2024-09-03ice: do not bring the VSI up, if it was down before the XDP setupLarysa Zaremba
After XDP configuration is completed, we bring the interface up unconditionally, regardless of its state before the call to .ndo_bpf(). Preserve the information whether the interface had to be brought down and later bring it up only in such case. Fixes: efc2214b6047 ("ice: Add support for XDP") Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-09-03ice: remove ICE_CFG_BUSY locking from AF_XDP codeLarysa Zaremba
Locking used in ice_qp_ena() and ice_qp_dis() does pretty much nothing, because ICE_CFG_BUSY is a state flag that is supposed to be set in a PF state, not VSI one. Therefore it does not protect the queue pair from e.g. reset. Remove ICE_CFG_BUSY locking from ice_qp_dis() and ice_qp_ena(). Fixes: 2d4238f55697 ("ice: Add support for AF_XDP") Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-09-03ice: check ICE_VSI_DOWN under rtnl_lock when preparing for resetLarysa Zaremba
Consider the following scenario: .ndo_bpf() | ice_prepare_for_reset() | ________________________|_______________________________________| rtnl_lock() | | ice_down() | | | test_bit(ICE_VSI_DOWN) - true | | ice_dis_vsi() returns | ice_up() | | | proceeds to rebuild a running VSI | .ndo_bpf() is not the only rtnl-locked callback that toggles the interface to apply new configuration. Another example is .set_channels(). To avoid the race condition above, act only after reading ICE_VSI_DOWN under rtnl_lock. Fixes: 0f9d5027a749 ("ice: Refactor VSI allocation, deletion and rebuild flow") Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-09-03ice: check for XDP rings instead of bpf program when unconfiguringLarysa Zaremba
If VSI rebuild is pending, .ndo_bpf() can attach/detach the XDP program on VSI without applying new ring configuration. When unconfiguring the VSI, we can encounter the state in which there is an XDP program but no XDP rings to destroy or there will be XDP rings that need to be destroyed, but no XDP program to indicate their presence. When unconfiguring, rely on the presence of XDP rings rather then XDP program, as they better represent the current state that has to be destroyed. Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-09-03ice: protect XDP configuration with a mutexLarysa Zaremba
The main threat to data consistency in ice_xdp() is a possible asynchronous PF reset. It can be triggered by a user or by TX timeout handler. XDP setup and PF reset code access the same resources in the following sections: * ice_vsi_close() in ice_prepare_for_reset() - already rtnl-locked * ice_vsi_rebuild() for the PF VSI - not protected * ice_vsi_open() - already rtnl-locked With an unfortunate timing, such accesses can result in a crash such as the one below: [ +1.999878] ice 0000:b1:00.0: Registered XDP mem model MEM_TYPE_XSK_BUFF_POOL on Rx ring 14 [ +2.002992] ice 0000:b1:00.0: Registered XDP mem model MEM_TYPE_XSK_BUFF_POOL on Rx ring 18 [Mar15 18:17] ice 0000:b1:00.0 ens801f0np0: NETDEV WATCHDOG: CPU: 38: transmit queue 14 timed out 80692736 ms [ +0.000093] ice 0000:b1:00.0 ens801f0np0: tx_timeout: VSI_num: 6, Q 14, NTC: 0x0, HW_HEAD: 0x0, NTU: 0x0, INT: 0x4000001 [ +0.000012] ice 0000:b1:00.0 ens801f0np0: tx_timeout recovery level 1, txqueue 14 [ +0.394718] ice 0000:b1:00.0: PTP reset successful [ +0.006184] BUG: kernel NULL pointer dereference, address: 0000000000000098 [ +0.000045] #PF: supervisor read access in kernel mode [ +0.000023] #PF: error_code(0x0000) - not-present page [ +0.000023] PGD 0 P4D 0 [ +0.000018] Oops: 0000 [#1] PREEMPT SMP NOPTI [ +0.000023] CPU: 38 PID: 7540 Comm: kworker/38:1 Not tainted 6.8.0-rc7 #1 [ +0.000031] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0014.082620210524 08/26/2021 [ +0.000036] Workqueue: ice ice_service_task [ice] [ +0.000183] RIP: 0010:ice_clean_tx_ring+0xa/0xd0 [ice] [...] [ +0.000013] Call Trace: [ +0.000016] <TASK> [ +0.000014] ? __die+0x1f/0x70 [ +0.000029] ? page_fault_oops+0x171/0x4f0 [ +0.000029] ? schedule+0x3b/0xd0 [ +0.000027] ? exc_page_fault+0x7b/0x180 [ +0.000022] ? asm_exc_page_fault+0x22/0x30 [ +0.000031] ? ice_clean_tx_ring+0xa/0xd0 [ice] [ +0.000194] ice_free_tx_ring+0xe/0x60 [ice] [ +0.000186] ice_destroy_xdp_rings+0x157/0x310 [ice] [ +0.000151] ice_vsi_decfg+0x53/0xe0 [ice] [ +0.000180] ice_vsi_rebuild+0x239/0x540 [ice] [ +0.000186] ice_vsi_rebuild_by_type+0x76/0x180 [ice] [ +0.000145] ice_rebuild+0x18c/0x840 [ice] [ +0.000145] ? delay_tsc+0x4a/0xc0 [ +0.000022] ? delay_tsc+0x92/0xc0 [ +0.000020] ice_do_reset+0x140/0x180 [ice] [ +0.000886] ice_service_task+0x404/0x1030 [ice] [ +0.000824] process_one_work+0x171/0x340 [ +0.000685] worker_thread+0x277/0x3a0 [ +0.000675] ? preempt_count_add+0x6a/0xa0 [ +0.000677] ? _raw_spin_lock_irqsave+0x23/0x50 [ +0.000679] ? __pfx_worker_thread+0x10/0x10 [ +0.000653] kthread+0xf0/0x120 [ +0.000635] ? __pfx_kthread+0x10/0x10 [ +0.000616] ret_from_fork+0x2d/0x50 [ +0.000612] ? __pfx_kthread+0x10/0x10 [ +0.000604] ret_from_fork_asm+0x1b/0x30 [ +0.000604] </TASK> The previous way of handling this through returning -EBUSY is not viable, particularly when destroying AF_XDP socket, because the kernel proceeds with removal anyway. There is plenty of code between those calls and there is no need to create a large critical section that covers all of them, same as there is no need to protect ice_vsi_rebuild() with rtnl_lock(). Add xdp_state_lock mutex to protect ice_vsi_rebuild() and ice_xdp(). Leaving unprotected sections in between would result in two states that have to be considered: 1. when the VSI is closed, but not yet rebuild 2. when VSI is already rebuild, but not yet open The latter case is actually already handled through !netif_running() case, we just need to adjust flag checking a little. The former one is not as trivial, because between ice_vsi_close() and ice_vsi_rebuild(), a lot of hardware interaction happens, this can make adding/deleting rings exit with an error. Luckily, VSI rebuild is pending and can apply new configuration for us in a managed fashion. Therefore, add an additional VSI state flag ICE_VSI_REBUILD_PENDING to indicate that ice_xdp() can just hot-swap the program. Also, as ice_vsi_rebuild() flow is touched in this patch, make it more consistent by deconfiguring VSI when coalesce allocation fails. Fixes: 2d4238f55697 ("ice: Add support for AF_XDP") Fixes: efc2214b6047 ("ice: Add support for XDP") Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-09-03ice: move netif_queue_set_napi to rtnl-protected sectionsLarysa Zaremba
Currently, netif_queue_set_napi() is called from ice_vsi_rebuild() that is not rtnl-locked when called from the reset. This creates the need to take the rtnl_lock just for a single function and complicates the synchronization with .ndo_bpf. At the same time, there no actual need to fill napi-to-queue information at this exact point. Fill napi-to-queue information when opening the VSI and clear it when the VSI is being closed. Those routines are already rtnl-locked. Also, rewrite napi-to-queue assignment in a way that prevents inclusion of XDP queues, as this leads to out-of-bounds writes, such as one below. [ +0.000004] BUG: KASAN: slab-out-of-bounds in netif_queue_set_napi+0x1c2/0x1e0 [ +0.000012] Write of size 8 at addr ffff889881727c80 by task bash/7047 [ +0.000006] CPU: 24 PID: 7047 Comm: bash Not tainted 6.10.0-rc2+ #2 [ +0.000004] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0014.082620210524 08/26/2021 [ +0.000003] Call Trace: [ +0.000003] <TASK> [ +0.000002] dump_stack_lvl+0x60/0x80 [ +0.000007] print_report+0xce/0x630 [ +0.000007] ? __pfx__raw_spin_lock_irqsave+0x10/0x10 [ +0.000007] ? __virt_addr_valid+0x1c9/0x2c0 [ +0.000005] ? netif_queue_set_napi+0x1c2/0x1e0 [ +0.000003] kasan_report+0xe9/0x120 [ +0.000004] ? netif_queue_set_napi+0x1c2/0x1e0 [ +0.000004] netif_queue_set_napi+0x1c2/0x1e0 [ +0.000005] ice_vsi_close+0x161/0x670 [ice] [ +0.000114] ice_dis_vsi+0x22f/0x270 [ice] [ +0.000095] ice_pf_dis_all_vsi.constprop.0+0xae/0x1c0 [ice] [ +0.000086] ice_prepare_for_reset+0x299/0x750 [ice] [ +0.000087] pci_dev_save_and_disable+0x82/0xd0 [ +0.000006] pci_reset_function+0x12d/0x230 [ +0.000004] reset_store+0xa0/0x100 [ +0.000006] ? __pfx_reset_store+0x10/0x10 [ +0.000002] ? __pfx_mutex_lock+0x10/0x10 [ +0.000004] ? __check_object_size+0x4c1/0x640 [ +0.000007] kernfs_fop_write_iter+0x30b/0x4a0 [ +0.000006] vfs_write+0x5d6/0xdf0 [ +0.000005] ? fd_install+0x180/0x350 [ +0.000005] ? __pfx_vfs_write+0x10/0xA10 [ +0.000004] ? do_fcntl+0x52c/0xcd0 [ +0.000004] ? kasan_save_track+0x13/0x60 [ +0.000003] ? kasan_save_free_info+0x37/0x60 [ +0.000006] ksys_write+0xfa/0x1d0 [ +0.000003] ? __pfx_ksys_write+0x10/0x10 [ +0.000002] ? __x64_sys_fcntl+0x121/0x180 [ +0.000004] ? _raw_spin_lock+0x87/0xe0 [ +0.000005] do_syscall_64+0x80/0x170 [ +0.000007] ? _raw_spin_lock+0x87/0xe0 [ +0.000004] ? __pfx__raw_spin_lock+0x10/0x10 [ +0.000003] ? file_close_fd_locked+0x167/0x230 [ +0.000005] ? syscall_exit_to_user_mode+0x7d/0x220 [ +0.000005] ? do_syscall_64+0x8c/0x170 [ +0.000004] ? do_syscall_64+0x8c/0x170 [ +0.000003] ? do_syscall_64+0x8c/0x170 [ +0.000003] ? fput+0x1a/0x2c0 [ +0.000004] ? filp_close+0x19/0x30 [ +0.000004] ? do_dup2+0x25a/0x4c0 [ +0.000004] ? __x64_sys_dup2+0x6e/0x2e0 [ +0.000002] ? syscall_exit_to_user_mode+0x7d/0x220 [ +0.000004] ? do_syscall_64+0x8c/0x170 [ +0.000003] ? __count_memcg_events+0x113/0x380 [ +0.000005] ? handle_mm_fault+0x136/0x820 [ +0.000005] ? do_user_addr_fault+0x444/0xa80 [ +0.000004] ? clear_bhb_loop+0x25/0x80 [ +0.000004] ? clear_bhb_loop+0x25/0x80 [ +0.000002] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ +0.000005] RIP: 0033:0x7f2033593154 Fixes: 080b0c8d6d26 ("ice: Fix ASSERT_RTNL() warning during certain scenarios") Fixes: 91fdbce7e8d6 ("ice: Add support in the driver for associating queue with napi") Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Amritha Nambiar <amritha.nambiar@intel.com> Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-09-03perf script: Minimize "not reaching sample" for '-F +brstackinsn'Andi Kleen
In some situations 'perf script -F +brstackinsn' sees a lot of "not reaching sample" messages. This happens when the last LBR block before the sample contains a branch that is not in the LBR, and the instruction dumping stops. $ perf record -b emacs -Q --batch '()' [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.396 MB perf.data (443 samples) ] $ perf script -F +brstackinsn ... 00007f0ab2d171a4 insn: 41 0f 94 c0 00007f0ab2d171a8 insn: 83 fa 01 00007f0ab2d171ab insn: 74 d3 # PRED 6 cycles [313] 1.00 IPC 00007f0ab2d17180 insn: 45 84 c0 00007f0ab2d17183 insn: 74 28 ... not reaching sample ... $ perf script -F +brstackinsn | grep -c reach 136 $ This is a problem for further analysis that wants to see the full code upto the sample. There are two common cases where the message is bogus: - The LBR only logs taken branches, but the branch might be a conditional branch that is not taken (that is the most common case actually) - The LBR sampling uses a filter ignoring some branches, but the perf script check checks for all branches. This patch fixes these two conditions, by only checking for conditional branches, as well as checking the perf_event_attr's branch filter attributes. For the test case above it fixes all the messages: $ ./perf script -F +brstackinsn | grep -c reach 0 Note that there are still conditions when the message is hit -- sometimes there can be a unconditional branch that misses the LBR update before the sample -- but they are much more rare now. Signed-off-by: Andi Kleen <ak@linux.intel.com> Reviewed-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20240229161828.386397-1-ak@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2024-09-03perf record offcpu: Constify control data for BPFNamhyung Kim
The control knobs set before loading BPF programs should be declared as 'const volatile' so that it can be optimized by the BPF core. Committer testing: root@x1:~# perf record --off-cpu ^C[ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 1.807 MB perf.data (5645 samples) ] root@x1:~# perf evlist cpu_atom/cycles/P cpu_core/cycles/P offcpu-time dummy:u root@x1:~# perf evlist -v cpu_atom/cycles/P: type: 0 (PERF_TYPE_HARDWARE), size: 136, config: 0xa00000000, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|CPU|PERIOD|IDENTIFIER, read_format: ID|LOST, disabled: 1, inherit: 1, freq: 1, precise_ip: 3, sample_id_all: 1 cpu_core/cycles/P: type: 0 (PERF_TYPE_HARDWARE), size: 136, config: 0x400000000, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|CPU|PERIOD|IDENTIFIER, read_format: ID|LOST, disabled: 1, inherit: 1, freq: 1, precise_ip: 3, sample_id_all: 1 offcpu-time: type: 1 (software), size: 136, config: 0xa (PERF_COUNT_SW_BPF_OUTPUT), { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|CALLCHAIN|CPU|PERIOD|IDENTIFIER, read_format: ID|LOST, disabled: 1, inherit: 1, freq: 1, sample_id_all: 1 dummy:u: type: 1 (software), size: 136, config: 0x9 (PERF_COUNT_SW_DUMMY), { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|CPU|IDENTIFIER, read_format: ID|LOST, inherit: 1, exclude_kernel: 1, exclude_hv: 1, mmap: 1, comm: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1, ksymbol: 1, bpf_event: 1 root@x1:~# perf trace -e bpf --max-events 5 perf record --off-cpu 0.000 ( 0.015 ms): :2949124/2949124 bpf(cmd: 36, uattr: 0x7ffefc6dbe30, size: 8) = -1 EOPNOTSUPP (Operation not supported) 0.031 ( 0.115 ms): :2949124/2949124 bpf(cmd: PROG_LOAD, uattr: 0x7ffefc6dbb60, size: 148) = 14 0.159 ( 0.037 ms): :2949124/2949124 bpf(cmd: PROG_LOAD, uattr: 0x7ffefc6dbc20, size: 148) = 14 23.868 ( 0.144 ms): perf/2949124 bpf(cmd: PROG_LOAD, uattr: 0x7ffefc6dbad0, size: 148) = 14 24.027 ( 0.014 ms): perf/2949124 bpf(uattr: 0x7ffefc6dbc80, size: 80) = 14 root@x1:~# Signed-off-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Song Liu <song@kernel.org> Link: https://lore.kernel.org/r/20240902200515.2103769-6-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2024-09-03perf lock contention: Constify control data for BPFNamhyung Kim
The control knobs set before loading BPF programs should be declared as 'const volatile' so that it can be optimized by the BPF core. Committer testing: root@x1:~# perf lock contention --use-bpf contended total wait max wait avg wait type caller 5 31.57 us 14.93 us 6.31 us mutex btrfs_delayed_update_inode+0x43 1 16.91 us 16.91 us 16.91 us rwsem:R btrfs_tree_read_lock_nested+0x1b 1 15.13 us 15.13 us 15.13 us spinlock btrfs_getattr+0xd1 1 6.65 us 6.65 us 6.65 us rwsem:R btrfs_tree_read_lock_nested+0x1b 1 4.34 us 4.34 us 4.34 us spinlock process_one_work+0x1a9 root@x1:~# root@x1:~# perf trace -e bpf --max-events 10 perf lock contention --use-bpf 0.000 ( 0.013 ms): :2948281/2948281 bpf(cmd: 36, uattr: 0x7ffd5f12d730, size: 8) = -1 EOPNOTSUPP (Operation not supported) 0.024 ( 0.120 ms): :2948281/2948281 bpf(cmd: PROG_LOAD, uattr: 0x7ffd5f12d460, size: 148) = 16 0.158 ( 0.034 ms): :2948281/2948281 bpf(cmd: PROG_LOAD, uattr: 0x7ffd5f12d520, size: 148) = 16 26.653 ( 0.154 ms): perf/2948281 bpf(cmd: PROG_LOAD, uattr: 0x7ffd5f12d3d0, size: 148) = 16 26.825 ( 0.014 ms): perf/2948281 bpf(uattr: 0x7ffd5f12d580, size: 80) = 16 87.924 ( 0.038 ms): perf/2948281 bpf(cmd: BTF_LOAD, uattr: 0x7ffd5f12d400, size: 40) = 16 87.988 ( 0.006 ms): perf/2948281 bpf(cmd: BTF_LOAD, uattr: 0x7ffd5f12d470, size: 40) = 16 88.019 ( 0.006 ms): perf/2948281 bpf(cmd: BTF_LOAD, uattr: 0x7ffd5f12d250, size: 40) = 16 88.029 ( 0.172 ms): perf/2948281 bpf(cmd: PROG_LOAD, uattr: 0x7ffd5f12d320, size: 148) = 17 88.217 ( 0.005 ms): perf/2948281 bpf(cmd: BTF_LOAD, uattr: 0x7ffd5f12d4d0, size: 40) = 16 root@x1:~# Signed-off-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Song Liu <song@kernel.org> Link: https://lore.kernel.org/r/20240902200515.2103769-5-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2024-09-03perf kwork: Constify control data for BPFNamhyung Kim
The control knobs set before loading BPF programs should be declared as 'const volatile' so that it can be optimized by the BPF core. Committer testing: root@x1:~# perf kwork report --use-bpf Starting trace, Hit <Ctrl+C> to stop and report ^C Kwork Name | Cpu | Total Runtime | Count | Max runtime | Max runtime start | Max runtime end | -------------------------------------------------------------------------------------------------------------------------------- (w)intel_atomic_commit_work [ | 0009 | 18.680 ms | 2 | 18.553 ms | 362410.681580 s | 362410.700133 s | (w)pm_runtime_work | 0007 | 13.300 ms | 1 | 13.300 ms | 362410.254996 s | 362410.268295 s | (w)intel_atomic_commit_work [ | 0009 | 9.846 ms | 2 | 9.717 ms | 362410.172352 s | 362410.182069 s | (w)acpi_ec_event_processor | 0002 | 8.106 ms | 1 | 8.106 ms | 362410.463187 s | 362410.471293 s | (s)SCHED:7 | 0000 | 1.351 ms | 106 | 0.063 ms | 362410.658017 s | 362410.658080 s | i915:157 | 0008 | 0.994 ms | 13 | 0.361 ms | 362411.222125 s | 362411.222486 s | (s)SCHED:7 | 0001 | 0.703 ms | 98 | 0.047 ms | 362410.245004 s | 362410.245051 s | (s)SCHED:7 | 0005 | 0.674 ms | 42 | 0.074 ms | 362411.483039 s | 362411.483113 s | (s)NET_RX:3 | 0001 | 0.556 ms | 10 | 0.079 ms | 362411.066388 s | 362411.066467 s | <SNIP> root@x1:~# perf trace -e bpf --max-events 5 perf kwork report --use-bpf 0.000 ( 0.016 ms): perf/2948007 bpf(cmd: 36, uattr: 0x7ffededa6660, size: 8) = -1 EOPNOTSUPP (Operation not supported) 0.026 ( 0.106 ms): perf/2948007 bpf(cmd: PROG_LOAD, uattr: 0x7ffededa6390, size: 148) = 12 0.152 ( 0.032 ms): perf/2948007 bpf(cmd: PROG_LOAD, uattr: 0x7ffededa6450, size: 148) = 12 26.247 ( 0.138 ms): perf/2948007 bpf(cmd: PROG_LOAD, uattr: 0x7ffededa6300, size: 148) = 12 26.396 ( 0.012 ms): perf/2948007 bpf(uattr: 0x7ffededa64b0, size: 80) = 12 Starting trace, Hit <Ctrl+C> to stop and report root@x1:~# Signed-off-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Song Liu <song@kernel.org> Cc: Yang Jihong <yangjihong@bytedance.com> Link: https://lore.kernel.org/r/20240902200515.2103769-4-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2024-09-03perf ftrace latency: Constify control data for BPFNamhyung Kim
The control knobs set before loading BPF programs should be declared as 'const volatile' so that it can be optimized by the BPF core. Committer testing: root@x1:~# perf ftrace latency --use-bpf -T schedule ^C# DURATION | COUNT | GRAPH | 0 - 1 us | 0 | | 1 - 2 us | 0 | | 2 - 4 us | 0 | | 4 - 8 us | 0 | | 8 - 16 us | 1 | | 16 - 32 us | 5 | | 32 - 64 us | 2 | | 64 - 128 us | 6 | | 128 - 256 us | 7 | | 256 - 512 us | 5 | | 512 - 1024 us | 22 | # | 1 - 2 ms | 36 | ## | 2 - 4 ms | 68 | ##### | 4 - 8 ms | 22 | # | 8 - 16 ms | 91 | ####### | 16 - 32 ms | 11 | | 32 - 64 ms | 26 | ## | 64 - 128 ms | 213 | ################# | 128 - 256 ms | 19 | # | 256 - 512 ms | 14 | # | 512 - 1024 ms | 5 | | 1 - ... s | 8 | | root@x1:~# root@x1:~# perf trace -e bpf perf ftrace latency --use-bpf -T schedule 0.000 ( 0.015 ms): perf/2944525 bpf(cmd: 36, uattr: 0x7ffe80de7b40, size: 8) = -1 EOPNOTSUPP (Operation not supported) 0.025 ( 0.102 ms): perf/2944525 bpf(cmd: PROG_LOAD, uattr: 0x7ffe80de7870, size: 148) = 8 0.136 ( 0.026 ms): perf/2944525 bpf(cmd: PROG_LOAD, uattr: 0x7ffe80de7930, size: 148) = 8 0.174 ( 0.026 ms): perf/2944525 bpf(cmd: PROG_LOAD, uattr: 0x7ffe80de77e0, size: 148) = 8 0.205 ( 0.010 ms): perf/2944525 bpf(uattr: 0x7ffe80de7990, size: 80) = 8 0.227 ( 0.011 ms): perf/2944525 bpf(cmd: BTF_LOAD, uattr: 0x7ffe80de7810, size: 40) = 8 0.244 ( 0.004 ms): perf/2944525 bpf(cmd: BTF_LOAD, uattr: 0x7ffe80de7880, size: 40) = 8 0.257 ( 0.006 ms): perf/2944525 bpf(cmd: BTF_LOAD, uattr: 0x7ffe80de7660, size: 40) = 8 0.265 ( 0.058 ms): perf/2944525 bpf(cmd: PROG_LOAD, uattr: 0x7ffe80de7730, size: 148) = 9 0.330 ( 0.004 ms): perf/2944525 bpf(cmd: BTF_LOAD, uattr: 0x7ffe80de78e0, size: 40) = 8 0.337 ( 0.003 ms): perf/2944525 bpf(cmd: BTF_LOAD, uattr: 0x7ffe80de7890, size: 40) = 8 0.343 ( 0.004 ms): perf/2944525 bpf(cmd: BTF_LOAD, uattr: 0x7ffe80de7880, size: 40) = 8 0.349 ( 0.003 ms): perf/2944525 bpf(cmd: BTF_LOAD, uattr: 0x7ffe80de78b0, size: 40) = 8 0.355 ( 0.004 ms): perf/2944525 bpf(cmd: BTF_LOAD, uattr: 0x7ffe80de7890, size: 40) = 8 0.361 ( 0.003 ms): perf/2944525 bpf(cmd: BTF_LOAD, uattr: 0x7ffe80de78b0, size: 40) = 8 0.367 ( 0.003 ms): perf/2944525 bpf(cmd: BTF_LOAD, uattr: 0x7ffe80de7880, size: 40) = 8 0.373 ( 0.014 ms): perf/2944525 bpf(cmd: BTF_LOAD, uattr: 0x7ffe80de7a00, size: 40) = 8 0.390 ( 0.358 ms): perf/2944525 bpf(uattr: 0x7ffe80de7950, size: 80) = 9 0.763 ( 0.014 ms): perf/2944525 bpf(uattr: 0x7ffe80de7950, size: 80) = 9 0.783 ( 0.011 ms): perf/2944525 bpf(uattr: 0x7ffe80de7950, size: 80) = 9 0.798 ( 0.017 ms): perf/2944525 bpf(uattr: 0x7ffe80de7950, size: 80) = 9 0.819 ( 0.003 ms): perf/2944525 bpf(uattr: 0x7ffe80de7700, size: 80) = 9 0.824 ( 0.047 ms): perf/2944525 bpf(cmd: PROG_LOAD, uattr: 0x7ffe80de76c0, size: 148) = 10 0.878 ( 0.008 ms): perf/2944525 bpf(uattr: 0x7ffe80de7950, size: 80) = 9 0.891 ( 0.014 ms): perf/2944525 bpf(cmd: MAP_UPDATE_ELEM, uattr: 0x7ffe80de79e0, size: 32) = 0 0.910 ( 0.103 ms): perf/2944525 bpf(cmd: PROG_LOAD, uattr: 0x7ffe80de7880, size: 148) = 9 1.016 ( 0.143 ms): perf/2944525 bpf(cmd: PROG_LOAD, uattr: 0x7ffe80de7880, size: 148) = 10 3.777 ( 0.068 ms): perf/2944525 bpf(cmd: PROG_LOAD, uattr: 0x7ffe80de7570, size: 148) = 12 3.848 ( 0.003 ms): perf/2944525 bpf(cmd: LINK_CREATE, uattr: 0x7ffe80de7550, size: 64) = -1 EBADF (Bad file descriptor) 3.859 ( 0.006 ms): perf/2944525 bpf(cmd: LINK_CREATE, uattr: 0x7ffe80de77c0, size: 64) = 12 6.504 ( 0.010 ms): perf/2944525 bpf(cmd: LINK_CREATE, uattr: 0x7ffe80de77c0, size: 64) = 14 ^C# DURATION | COUNT | GRAPH | 0 - 1 us | 0 | | 1 - 2 us | 0 | | 2 - 4 us | 1 | | 4 - 8 us | 3 | | 8 - 16 us | 3 | | 16 - 32 us | 11 | | 32 - 64 us | 9 | | 64 - 128 us | 17 | | 128 - 256 us | 30 | # | 256 - 512 us | 20 | | 512 - 1024 us | 42 | # | 1 - 2 ms | 151 | ###### | 2 - 4 ms | 106 | #### | 4 - 8 ms | 18 | | 8 - 16 ms | 149 | ###### | 16 - 32 ms | 30 | # | 32 - 64 ms | 17 | | 64 - 128 ms | 360 | ############### | 128 - 256 ms | 52 | ## | 256 - 512 ms | 18 | | 512 - 1024 ms | 28 | # | 1 - ... s | 5 | | root@x1:~# Signed-off-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Song Liu <song@kernel.org> Link: https://lore.kernel.org/r/20240902200515.2103769-3-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2024-09-03perf stat: Constify control data for BPFNamhyung Kim
The control knobs set before loading BPF programs should be declared as 'const volatile' so that it can be optimized by the BPF core. Committer testing: root@x1:~# perf stat --bpf-counters -e cpu_core/cycles/,cpu_core/instructions/ sleep 1 Performance counter stats for 'sleep 1': 2,442,583 cpu_core/cycles/ 2,494,425 cpu_core/instructions/ 1.002687372 seconds time elapsed 0.001126000 seconds user 0.001166000 seconds sys root@x1:~# perf trace -e bpf --max-events 10 perf stat --bpf-counters -e cpu_core/cycles/,cpu_core/instructions/ sleep 1 0.000 ( 0.019 ms): perf/2944119 bpf(cmd: OBJ_GET, uattr: 0x7fffdf5cdd40, size: 20) = 5 0.021 ( 0.002 ms): perf/2944119 bpf(cmd: OBJ_GET_INFO_BY_FD, uattr: 0x7fffdf5cdcd0, size: 16) = 0 0.030 ( 0.005 ms): perf/2944119 bpf(cmd: MAP_LOOKUP_ELEM, uattr: 0x7fffdf5ceda0, size: 32) = 0 0.037 ( 0.004 ms): perf/2944119 bpf(cmd: LINK_GET_FD_BY_ID, uattr: 0x7fffdf5ced80, size: 12) = -1 ENOENT (No such file or directory) 0.189 ( 0.004 ms): perf/2944119 bpf(cmd: 36, uattr: 0x7fffdf5cec10, size: 8) = -1 EOPNOTSUPP (Operation not supported) 0.201 ( 0.095 ms): perf/2944119 bpf(cmd: PROG_LOAD, uattr: 0x7fffdf5ce940, size: 148) = 10 0.305 ( 0.026 ms): perf/2944119 bpf(cmd: PROG_LOAD, uattr: 0x7fffdf5cea00, size: 148) = 10 0.347 ( 0.012 ms): perf/2944119 bpf(cmd: BTF_LOAD, uattr: 0x7fffdf5ce8e0, size: 40) = 10 0.364 ( 0.004 ms): perf/2944119 bpf(cmd: BTF_LOAD, uattr: 0x7fffdf5ce950, size: 40) = 10 0.376 ( 0.006 ms): perf/2944119 bpf(cmd: BTF_LOAD, uattr: 0x7fffdf5ce730, size: 40) = 10 root@x1:~# Performance counter stats for 'sleep 1': 271,221 cpu_core/cycles/ 139,150 cpu_core/instructions/ 1.002881677 seconds time elapsed 0.001318000 seconds user 0.001314000 seconds sys root@x1:~# Signed-off-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Song Liu <song@kernel.org> Link: https://lore.kernel.org/r/20240902200515.2103769-2-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2024-09-03platform/x86/amd: pmf: Make ASUS GA403 quirk genericLuke D. Jones
The original quirk should match to GA403U so that the full range of GA403U models can benefit. Signed-off-by: Luke D. Jones <luke@ljones.dev> Link: https://lore.kernel.org/r/20240831003905.1060977-1-luke@ljones.dev Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2024-09-03perf test: Make watchpoint data 32-bits on i386Ian Rogers
i386 only supports watchpoints up to size 4, 8 bytes causes extra counts and test failures. Signed-off-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Cc: Chaitanya S Prakash <chaitanyas.prakash@arm.com> Cc: Colin Ian King <colin.i.king@gmail.com> Cc: David Ahern <dsa@cumulusnetworks.com> Cc: Dominique Martinet <asmadeus@codewreck.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@linaro.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Garry <john.g.garry@oracle.com> Cc: Junhao He <hejunhao3@huawei.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Yang Jihong <yangjihong@bytedance.com> Link: https://lore.kernel.org/r/20240831070415.506194-7-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2024-09-03perf test: Skip uprobe test if probe command isn't presentIan Rogers
The probe command is dependent on libelf. Skip the test if the required probe command isn't present. Signed-off-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Cc: Chaitanya S Prakash <chaitanyas.prakash@arm.com> Cc: Colin Ian King <colin.i.king@gmail.com> Cc: David Ahern <dsa@cumulusnetworks.com> Cc: Dominique Martinet <asmadeus@codewreck.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@linaro.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Garry <john.g.garry@oracle.com> Cc: Junhao He <hejunhao3@huawei.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Yang Jihong <yangjihong@bytedance.com> Link: https://lore.kernel.org/r/20240831070415.506194-4-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2024-09-03perf time-utils: Fix 32-bit nsec parsingIan Rogers
The "time utils" test fails in 32-bit builds: ... parse_nsec_time("18446744073.709551615") Failed. ptime 4294967295709551615 expected 18446744073709551615 ... Switch strtoul to strtoull as an unsigned long in 32-bit build isn't 64-bits. Fixes: c284d669a20d408b ("perf tools: Move parse_nsec_time to time-utils.c") Signed-off-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Cc: Chaitanya S Prakash <chaitanyas.prakash@arm.com> Cc: Colin Ian King <colin.i.king@gmail.com> Cc: David Ahern <dsa@cumulusnetworks.com> Cc: Dominique Martinet <asmadeus@codewreck.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@linaro.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Garry <john.g.garry@oracle.com> Cc: Junhao He <hejunhao3@huawei.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Yang Jihong <yangjihong@bytedance.com> Link: https://lore.kernel.org/r/20240831070415.506194-3-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2024-09-03perf pmus: Fix name comparisons on 32-bit systemsIan Rogers
The hex PMU suffix maybe 64-bit but the comparisons were "unsigned long" or 32-bit on 32-bit systems. This was causing the "PMU name comparison" test to fail in a 32-bit build. Signed-off-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Cc: Chaitanya S Prakash <chaitanyas.prakash@arm.com> Cc: Colin Ian King <colin.i.king@gmail.com> Cc: David Ahern <dsa@cumulusnetworks.com> Cc: Dominique Martinet <asmadeus@codewreck.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@linaro.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Garry <john.g.garry@oracle.com> Cc: Junhao He <hejunhao3@huawei.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Yang Jihong <yangjihong@bytedance.com> Link: https://lore.kernel.org/r/20240831070415.506194-2-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2024-09-03perf annotate: LLVM-based disassemblerSteinar H. Gunderson
Support using LLVM as a disassembler method, allowing helperless annotation in non-distro builds. (It is also much faster than using libbfd or bfd objdump on binaries with a lot of debug information.) This is nearly identical to the output of llvm-objdump; there are some very rare whitespace differences, some minor changes to demangling (since we use perf's regular demangling and not LLVM's own) and the occasional case where llvm-objdump makes a different choice when multiple symbols share the same address. It should work across all of LLVM's supported architectures, although I've only tested 64-bit x86, and finding the right triple from perf's idea of machine architecture can sometimes be a bit tricky. Ideally, we should have some way of finding the triplet just from the file itself. Committer notes: Address this on 32-bit systems by using PRIu64 from inttypes.h 3 17.58 almalinux:9-i386 : FAIL gcc version 11.4.1 20231218 (Red Hat 11.4.1-3) (GCC) util/llvm-c-helpers.cpp: In function ‘char* make_symbol_relative_string(dso*, const char*, u64, u64)’: util/llvm-c-helpers.cpp:150:52: error: format ‘%lx’ expects argument of type ‘long unsigned int’, but argument 5 has type ‘u64’ {aka +‘long long unsigned int’} [-Werror=format=] 150 | snprintf(buf, sizeof(buf), "%s+0x%lx", | ~~^ | | | long unsigned int | %llx 151 | demangled ? demangled : sym_name, addr - base_addr); | ~~~~~~~~~~~~~~~~ | | | u64 {aka long long unsigned int} cc1plus: all warnings being treated as errors Signed-off-by: Steinar H. Gunderson <sesse@google.com> Cc: Ian Rogers <irogers@google.com> Link: https://lore.kernel.org/r/20240803152008.2818485-3-sesse@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2024-09-03Merge branch 'ptp-ocp-fix-serial-port-information-export'Paolo Abeni
Vadim Fedorenko says: ==================== ptp: ocp: fix serial port information export Starting v6.8 the serial port subsystem changed the hierarchy of devices and symlinks are not working anymore. Previous discussion made it clear that the idea of symlinks for tty devices was wrong by design [1]. This series implements additional attributes to expose the information and removes symlinks for tty devices. [1] https://lore.kernel.org/netdev/2024060503-subsonic-pupil-bbee@gregkh/ v6 -> v7: - fix issues with applying patches v5 -> v6: - split conversion to array to separate patch per Jiri's feedback - move changelog to cover letter v4 -> v5: - remove unused variable in ptp_ocp_tty_show v3 -> v4: - re-organize info printing to use ptp_ocp_tty_port_name() - keep uintptr_t to be consistent with other code v2 -> v3: - replace serial ports definitions with array and enum for index - replace pointer math with direct array access - nit in documentation spelling v1 -> v2: - add Documentation/ABI changes ==================== Link: https://patch.msgid.link/20240829183603.1156671-1-vadfed@meta.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-09-03docs: ABI: update OCP TimeCard sysfs entriesVadim Fedorenko
Update documentation according to the changes in the driver. New attributes group tty is exposed and ttyGNSS, ttyGNSS2, ttyMAC and ttyNMEA are moved to this group. Also, these attributes are no more links to the devices but rather simple text files containing names of tty devices. Signed-off-by: Vadim Fedorenko <vadfed@meta.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-09-03ptp: ocp: adjust sysfs entries to expose tty informationVadim Fedorenko
Implement additional attribute group to expose serial port information. Fixes tag points to the commit which introduced the change in serial port subsystem and made it impossible to use symlinks. Fixes: b286f4e87e32 ("serial: core: Move tty and serdev to be children of serial core port device") Signed-off-by: Vadim Fedorenko <vadfed@meta.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-09-03ptp: ocp: convert serial ports to arrayVadim Fedorenko
Simplify serial port management code by using array of ports and helpers to get the name of the port. This change is needed to make the next patch simplier. Signed-off-by: Vadim Fedorenko <vadfed@meta.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-09-03perf annotate: Split out read_symbol()Steinar H. Gunderson
The Capstone disassembler code has a useful code snippet to read the bytes for a given code symbol into memory. Split it out into its own function, so that the LLVM disassembler can use it in the next patch. Signed-off-by: Steinar H. Gunderson <sesse@google.com> Cc: Ian Rogers <irogers@google.com> Link: https://lore.kernel.org/r/20240803152008.2818485-2-sesse@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2024-09-03perf report: Support LLVM for addr2line()Steinar H. Gunderson
In addition to the existing support for libbfd and calling out to an external addr2line command, add support for using libllvm directly. This is both faster than libbfd, and can be enabled in distro builds (the LLVM license has an explicit provision for GPLv2 compatibility). Thus, it is set as the primary choice if available. As an example, running 'perf report' on a medium-size profile with DWARF-based backtraces took 58 seconds with LLVM, 78 seconds with libbfd, 153 seconds with external llvm-addr2line, and I got tired and aborted the test after waiting for 55 minutes with external bfd addr2line (which is the default for perf as compiled by distributions today). Evidently, for this case, the bfd addr2line process needs 18 seconds (on a 5.2 GHz Zen 3) to load the .debug ELF in question, hits the 1-second timeout and gets killed during initialization, getting restarted anew every time. Having an in-process addr2line makes this much more robust. As future extensions, libllvm can be used in many other places where we currently use libbfd or other libraries: - Symbol enumeration (in particular, for PE binaries). - Demangling (including non-Itanium demangling, e.g. Microsoft or Rust). - Disassembling (perf annotate). However, these are much less pressing; most people don't profile PE binaries, and perf has non-bfd paths for ELF. The same with demangling; the default _cxa_demangle path works fine for most users, and while bfd objdump can be slow on large binaries, it is possible to use --objdump=llvm-objdump to get the speed benefits. (It appears LLVM-based demangling is very simple, should we want that.) Tested with LLVM 14, 15, 16, 18 and 19. For some reason, LLVM 12 was not correctly detected using feature_check, and thus was not tested. Committer notes: Added the name and a __maybe_unused to address: 1 13.50 almalinux:8 : FAIL gcc version 8.5.0 20210514 (Red Hat 8.5.0-22) (GCC) util/srcline.c: In function 'dso__free_a2l': util/srcline.c:184:20: error: parameter name omitted void dso__free_a2l(struct dso *) ^~~~~~~~~~~~ make[3]: *** [/git/perf-6.11.0-rc3/tools/build/Makefile.build:158: util] Error 2 Signed-off-by: Steinar H. Gunderson <sesse@google.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Ian Rogers <irogers@google.com> Link: https://lore.kernel.org/r/20240803152008.2818485-1-sesse@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2024-09-03spi: spidev: Add missing spi_device_id for jg10309-01Geert Uytterhoeven
When the of_device_id entry for "elgin,jg10309-01" was added, the corresponding spi_device_id was forgotten, causing a warning message during boot-up: SPI driver spidev has no spi_device_id for elgin,jg10309-01 Fix module autoloading and shut up the warning by adding the missing entry. Fixes: 5f3eee1eef5d0edd ("spi: spidev: Add an entry for elgin,jg10309-01") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://patch.msgid.link/54bbb9d8a8db7e52d13e266f2d4a9bcd8b42a98a.1725366625.git.geert+renesas@glider.be Signed-off-by: Mark Brown <broonie@kernel.org>
2024-09-03parisc: Delay write-protection until mark_rodata_ro() callHelge Deller
Do not write-protect the kernel read-only and __ro_after_init sections earlier than before mark_rodata_ro() is called. This fixes a boot issue on parisc which is triggered by commit 91a1d97ef482 ("jump_label,module: Don't alloc static_key_mod for __ro_after_init keys"). That commit may modify static key contents in the __ro_after_init section at bootup, so this section needs to be writable at least until mark_rodata_ro() is called. Signed-off-by: Helge Deller <deller@gmx.de> Reported-by: matoro <matoro_mailinglist_kernel@matoro.tk> Reported-by: Christoph Biedl <linux-kernel.bfrz@manchmal.in-ulm.de> Tested-by: Christoph Biedl <linux-kernel.bfrz@manchmal.in-ulm.de> Link: https://lore.kernel.org/linux-parisc/096cad5aada514255cd7b0b9dbafc768@matoro.tk/#r Fixes: 91a1d97ef482 ("jump_label,module: Don't alloc static_key_mod for __ro_after_init keys") Cc: stable@vger.kernel.org # v6.10+
2024-09-03net: phy: Fix missing of_node_put() for ledsJinjie Ruan
The call of of_get_child_by_name() will cause refcount incremented for leds, if it succeeds, it should call of_node_put() to decrease it, fix it. Fixes: 01e5b728e9e4 ("net: phy: Add a binding for PHY LEDs") Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20240830022025.610844-1-ruanjinjie@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-09-03Merge branch 'net-ethernet-ti-am65-cpsw-fix-xdp-implementation'Paolo Abeni
Roger Quadros says: ==================== net: ethernet: ti: am65-cpsw: Fix XDP implementation The XDP implementation on am65-cpsw driver is broken in many ways and this series fixes it. Below are the current issues that are being fixed: 1) The following XDP_DROP test from [1] stalls the interface after 250 packets. ~# xdb-bench drop -m native eth0 This is because new RX requests are never queued. Fix that. 2) The below XDP_TX test from [1] fails with a warning [ 499.947381] XDP_WARN: xdp_update_frame_from_buff(line:277): Driver BUG: missing reserved tailroom ~# xdb-bench tx -m native eth0 Fix that by using PAGE_SIZE during xdp_init_buf(). 3) In XDP_REDIRECT case only 1 packet was processed in rx_poll. Fix it to process up to budget packets. ~# ./xdp-bench redirect -m native eth0 eth0 4) If number of TX queues are set to 1 we get a NULL pointer dereference during XDP_TX. ~# ethtool -L eth0 tx 1 ~# ./xdp-trafficgen udp -A <ipv6-src> -a <ipv6-dst> eth0 -t 2 Transmitting on eth0 (ifindex 2) [ 241.135257] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000030 5) Net statistics is broken for XDP_TX and XDP_REDIRECT [1] xdp-tools suite https://github.com/xdp-project/xdp-tools Signed-off-by: Roger Quadros <rogerq@kernel.org> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Acked-by: Julien Panis <jpanis@baylibre.com> Reviewed-by: MD Danish Anwar <danishanwar@ti.com> --- ==================== Link: https://patch.msgid.link/20240829-am65-cpsw-xdp-v1-0-ff3c81054a5e@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-09-03net: ethernet: ti: am65-cpsw: Fix RX statistics for XDP_TX and XDP_REDIRECTRoger Quadros
We are not using ndev->stats for rx_packets and rx_bytes anymore. Instead, we use per CPU stats which are collated in am65_cpsw_nuss_ndo_get_stats(). Fix RX statistics for XDP_TX and XDP_REDIRECT cases. Fixes: 8acacc40f733 ("net: ethernet: ti: am65-cpsw: Add minimal XDP support") Signed-off-by: Roger Quadros <rogerq@kernel.org> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Acked-by: Julien Panis <jpanis@baylibre.com> Reviewed-by: MD Danish Anwar <danishanwar@ti.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-09-03net: ethernet: ti: am65-cpsw: Fix NULL dereference on XDP_TXRoger Quadros
If number of TX queues are set to 1 we get a NULL pointer dereference during XDP_TX. ~# ethtool -L eth0 tx 1 ~# ./xdp-trafficgen udp -A <ipv6-src> -a <ipv6-dst> eth0 -t 2 Transmitting on eth0 (ifindex 2) [ 241.135257] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000030 Fix this by using actual TX queues instead of max TX queues when picking the TX channel in am65_cpsw_ndo_xdp_xmit(). Fixes: 8acacc40f733 ("net: ethernet: ti: am65-cpsw: Add minimal XDP support") Signed-off-by: Roger Quadros <rogerq@kernel.org> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Acked-by: Julien Panis <jpanis@baylibre.com> Reviewed-by: MD Danish Anwar <danishanwar@ti.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-09-03net: ethernet: ti: am65-cpsw: fix XDP_DROP, XDP_TX and XDP_REDIRECTRoger Quadros
The following XDP_DROP test from [1] stalls the interface after 250 packets. ~# xdb-bench drop -m native eth0 This is because new RX requests are never queued. Fix that. The below XDP_TX test from [1] fails with a warning [ 499.947381] XDP_WARN: xdp_update_frame_from_buff(line:277): Driver BUG: missing reserved tailroom ~# xdb-bench tx -m native eth0 Fix that by using PAGE_SIZE during xdp_init_buf(). In XDP_REDIRECT case only 1 packet was processed in rx_poll. Fix it to process up to budget packets. Fix all XDP error cases to call trace_xdp_exception() and drop the packet in am65_cpsw_run_xdp(). [1] xdp-tools suite https://github.com/xdp-project/xdp-tools Fixes: 8acacc40f733 ("net: ethernet: ti: am65-cpsw: Add minimal XDP support") Signed-off-by: Roger Quadros <rogerq@kernel.org> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Acked-by: Julien Panis <jpanis@baylibre.com> Reviewed-by: MD Danish Anwar <danishanwar@ti.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-09-02Merge tag 'for-net-2024-08-30' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth Luiz Augusto von Dentz says: ==================== bluetooth pull request for net: - qca: If memdump doesn't work, re-enable IBS - MGMT: Fix not generating command complete for MGMT_OP_DISCONNECT - Revert "Bluetooth: MGMT/SMP: Fix address type when using SMP over BREDR/LE" - MGMT: Ignore keys being loaded with invalid type * tag 'for-net-2024-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth: Bluetooth: MGMT: Ignore keys being loaded with invalid type Revert "Bluetooth: MGMT/SMP: Fix address type when using SMP over BREDR/LE" Bluetooth: MGMT: Fix not generating command complete for MGMT_OP_DISCONNECT Bluetooth: hci_sync: Introduce hci_cmd_sync_run/hci_cmd_sync_run_once Bluetooth: qca: If memdump doesn't work, re-enable IBS ==================== Link: https://patch.msgid.link/20240830220300.1316772-1-luiz.dentz@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-02Merge tag 'linux-can-fixes-for-6.11-20240830' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2024-08-30 The first patch is by Kuniyuki Iwashima for the CAN BCM protocol that adds a missing proc entry removal when a device unregistered. Simon Horman fixes the cleanup in the error cleanup path of the m_can driver's open function. Markus Schneider-Pargmann contributes 7 fixes for the m_can driver, all related to the recently added IRQ coalescing support. The next 2 patches are by me, target the mcp251xfd driver and fix ring and coalescing configuration problems when switching from CAN-CC to CAN-FD mode. Simon Arlott's patch fixes a possible deadlock in the mcp251x driver. The last patch is by Martin Jocic for the kvaser_pciefd driver and fixes a problem with lost IRQs, which result in starvation, under high load situations. * tag 'linux-can-fixes-for-6.11-20240830' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can: can: kvaser_pciefd: Use a single write when releasing RX buffers can: mcp251x: fix deadlock if an interrupt occurs during mcp251x_open can: mcp251xfd: mcp251xfd_ring_init(): check TX-coalescing configuration can: mcp251xfd: fix ring configuration when switching from CAN-CC to CAN-FD mode can: m_can: Limit coalescing to peripheral instances can: m_can: Reset cached active_interrupts on start can: m_can: disable_all_interrupts, not clear active_interrupts can: m_can: Do not cancel timer from within timer can: m_can: Remove m_can_rx_peripheral indirection can: m_can: Remove coalesing disable in isr during suspend can: m_can: Reset coalescing during suspend/resume can: m_can: Release irq on error in m_can_open can: bcm: Remove proc entry when dev is unregistered. ==================== Link: https://patch.msgid.link/20240830215914.1610393-1-mkl@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-02btrfs: zoned: handle broken write pointer on zonesNaohiro Aota
Btrfs rejects to mount a FS if it finds a block group with a broken write pointer (e.g, unequal write pointers on two zones of RAID1 block group). Since such case can happen easily with a power-loss or crash of a system, we need to handle the case more gently. Handle such block group by making it unallocatable, so that there will be no writes into it. That can be done by setting the allocation pointer at the end of allocating region (= block_group->zone_capacity). Then, existing code handle zone_unusable properly. Having proper zone_capacity is necessary for the change. So, set it as fast as possible. We cannot handle RAID0 and RAID10 case like this. But, they are anyway unable to read because of a missing stripe. Fixes: 265f7237dd25 ("btrfs: zoned: allow DUP on meta-data block groups") Fixes: 568220fa9657 ("btrfs: zoned: support RAID0/1/10 on top of raid stripe tree") CC: stable@vger.kernel.org # 6.1+ Reported-by: HAN Yuwei <hrx@bupt.moe> Cc: Xuefer <xuefer@gmail.com> Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com> Signed-off-by: David Sterba <dsterba@suse.com>
2024-09-02perf daemon: Fix the build on more 32-bit architecturesArnaldo Carvalho de Melo
FYI: I'm carrying this on perf-tools-next. The previous attempt fixed the build on debian:experimental-x-mipsel, but when building on a larger set of containers I noticed it broke the build on some other 32-bit architectures such as: 42 7.87 ubuntu:18.04-x-arm : FAIL gcc version 7.5.0 (Ubuntu/Linaro 7.5.0-3ubuntu1~18.04) builtin-daemon.c: In function 'cmd_session_list': builtin-daemon.c:692:16: error: format '%llu' expects argument of type 'long long unsigned int', but argument 4 has type 'long int' [-Werror=format=] fprintf(out, "%c%" PRIu64, ^~~~~ builtin-daemon.c:694:13: csv_sep, (curr - daemon->start) / 60); ~~~~~~~~~~~~~~~~~~~~~~~~~~~ In file included from builtin-daemon.c:3:0: /usr/arm-linux-gnueabihf/include/inttypes.h:105:34: note: format string is defined here # define PRIu64 __PRI64_PREFIX "u" So lets cast that time_t (32-bit/64-bit) to uint64_t to make sure it builds everywhere. Fixes: 4bbe6002931954bb ("perf daemon: Fix the build on 32-bit architectures") Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Link: https://lore.kernel.org/r/ZsPmldtJ0D9Cua9_@x1 Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2024-09-02perf python: include "util/sample.h"Xu Yang
The 32-bit arm build system will complain: tools/perf/util/python.c:75:28: error: field ‘sample’ has incomplete type 75 | struct perf_sample sample; However, arm64 build system doesn't complain this. The root cause is arm64 define "HAVE_KVM_STAT_SUPPORT := 1" in tools/perf/arch/arm64/Makefile, but arm arch doesn't define this. This will lead to kvm-stat.h include other header files on arm64 build system, especially "util/sample.h" for util/python.c. This will try to directly include "util/sample.h" for "util/python.c" to avoid such build issue on arm platform. Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Cc: imx@lists.linux.dev Link: https://lore.kernel.org/r/20240819023403.201324-1-xu.yang_2@nxp.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2024-09-02perf lock contention: Fix spinlock and rwlock accountingNamhyung Kim
The spinlock and rwlock use a single-element per-cpu array to track current locks due to performance reason. But this means the key is always available and it cannot simply account lock stats in the array because some of them are invalid. In fact, the contention_end() program in the BPF invalidates the entry by setting the 'lock' value to 0 instead of deleting the entry for the hashmap. So it should skip entries with the lock value of 0 in the account_end_timestamp(). Otherwise, it'd have spurious high contention on an idle machine: $ sudo perf lock con -ab -Y spinlock sleep 3 contended total wait max wait avg wait type caller 8 4.72 s 1.84 s 590.46 ms spinlock rcu_core+0xc7 8 1.87 s 1.87 s 233.48 ms spinlock process_one_work+0x1b5 2 1.87 s 1.87 s 933.92 ms spinlock worker_thread+0x1a2 3 1.81 s 1.81 s 603.93 ms spinlock tmigr_update_events+0x13c 2 1.72 s 1.72 s 861.98 ms spinlock tick_do_update_jiffies64+0x25 6 42.48 us 13.02 us 7.08 us spinlock futex_q_lock+0x2a 1 13.03 us 13.03 us 13.03 us spinlock futex_wake+0xce 1 11.61 us 11.61 us 11.61 us spinlock rcu_core+0xc7 I don't believe it has contention on a spinlock longer than 1 second. After this change, it only reports some small contentions. $ sudo perf lock con -ab -Y spinlock sleep 3 contended total wait max wait avg wait type caller 4 133.51 us 43.29 us 33.38 us spinlock tick_do_update_jiffies64+0x25 4 69.06 us 31.82 us 17.27 us spinlock process_one_work+0x1b5 2 50.66 us 25.77 us 25.33 us spinlock rcu_core+0xc7 1 28.45 us 28.45 us 28.45 us spinlock rcu_core+0xc7 1 24.77 us 24.77 us 24.77 us spinlock tmigr_update_events+0x13c 1 23.34 us 23.34 us 23.34 us spinlock raw_spin_rq_lock_nested+0x15 Fixes: b5711042a1c8 ("perf lock contention: Use per-cpu array map for spinlocks") Reported-by: Xi Wang <xii@google.com> Cc: Song Liu <song@kernel.org> Cc: bpf@vger.kernel.org Link: https://lore.kernel.org/r/20240828052953.1445862-1-namhyung@kernel.org Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2024-09-02perf test pmu: Set uninitialized PMU alias to nullVeronika Molnarova
Commit 3e0bf9fde2984469 ("perf pmu: Restore full PMU name wildcard support") adds a test case "PMU cmdline match" that covers PMU name wildcard support provided by function perf_pmu__match(). The test works with a wide range of supported combinations of PMU name matching but omits the case that if the perf_pmu__match() cannot match the PMU name to the wildcard, it tries to match its alias. However, this variable is not set up, causing the test case to fail when run with subprocesses or to segfault if run as a single process. ./perf test -vv 9 9: Sysfs PMU tests : 9.1: Parsing with PMU format directory : Ok 9.2: Parsing with PMU event : Ok 9.3: PMU event names : Ok 9.4: PMU name combining : Ok 9.5: PMU name comparison : Ok 9.6: PMU cmdline match : FAILED! ./perf test -F 9 9.1: Parsing with PMU format directory : Ok 9.2: Parsing with PMU event : Ok 9.3: PMU event names : Ok 9.4: PMU name combining : Ok 9.5: PMU name comparison : Ok Segmentation fault (core dumped) Initialize the PMU alias to null for all tests of perf_pmu__match() as this functionality is not being tested and the alias matching works exactly the same as the matching of the PMU name. ./perf test -F 9 9.1: Parsing with PMU format directory : Ok 9.2: Parsing with PMU event : Ok 9.3: PMU event names : Ok 9.4: PMU name combining : Ok 9.5: PMU name comparison : Ok 9.6: PMU cmdline match : Ok Fixes: 3e0bf9fde2984469 ("perf pmu: Restore full PMU name wildcard support") Signed-off-by: Veronika Molnarova <vmolnaro@redhat.com> Cc: james.clark@arm.com Cc: mpetlan@redhat.com Cc: rstoyano@redhat.com Link: https://lore.kernel.org/r/20240808103749.9356-1-vmolnaro@redhat.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2024-09-02btrfs: qgroup: don't use extent changeset when not neededFedor Pchelkin
The local extent changeset is passed to clear_record_extent_bits() where it may have some additional memory dynamically allocated for ulist. When qgroup is disabled, the memory is leaked because in this case the changeset is not released upon __btrfs_qgroup_release_data() return. Since the recorded contents of the changeset are not used thereafter, just don't pass it. Found by Linux Verification Center (linuxtesting.org) with Syzkaller. Reported-by: syzbot+81670362c283f3dd889c@syzkaller.appspotmail.com Closes: https://lore.kernel.org/lkml/000000000000aa8c0c060ade165e@google.com Fixes: af0e2aab3b70 ("btrfs: qgroup: flush reservations during quota disable") CC: stable@vger.kernel.org # 6.10+ Reviewed-by: Boris Burkov <boris@bur.io> Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru> Signed-off-by: David Sterba <dsterba@suse.com>
2024-09-02Revert "wifi: ath11k: support hibernation"Baochen Qiang
This reverts commit 166a490f59ac10340ee5330e51c15188ce2a7f8f. There are several reports that this commit breaks system suspend on some specific Lenovo platforms. Since there is no fix available, for now revert this commit to make suspend work again on those platforms. Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219196 Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2301921 Cc: <stable@vger.kernel.org> # 6.10.x: d3e154d7776b: Revert "wifi: ath11k: restore country code during resume" Cc: <stable@vger.kernel.org> # 6.10.x Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20240830073420.5790-3-quic_bqiang@quicinc.com
2024-09-02Revert "wifi: ath11k: restore country code during resume"Baochen Qiang
This reverts commit 7f0343b7b8710436c1e6355c71782d32ada47e0c. We are going to revert commit 166a490f59ac ("wifi: ath11k: support hibernation"), on which this commit depends. With that commit reverted, this one is not needed any more, so revert this commit first. Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20240830073420.5790-2-quic_bqiang@quicinc.com
2024-09-02hwmon: (hp-wmi-sensors) Check if WMI event data existsArmin Wolf
The BIOS can choose to return no event data in response to a WMI event, so the ACPI object passed to the WMI notify handler can be NULL. Check for such a situation and ignore the event in such a case. Fixes: 23902f98f8d4 ("hwmon: add HP WMI Sensors driver") Signed-off-by: Armin Wolf <W_Armin@gmx.de> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Message-ID: <20240901031055.3030-2-W_Armin@gmx.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2024-09-02perf tools: Build x86 32-bit syscall table from ↵Arnaldo Carvalho de Melo
arch/x86/entry/syscalls/syscall_32.tbl To remove one more use of the audit libs and address a problem reported with a recent change where a function isn't available when using the audit libs method, that should really go away, this being one step in that direction. The script used to generate the 64-bit syscall table was already parametrized to generate for both 64-bit and 32-bit, so just use it and wire the generated table to the syscalltbl.c routines. Reported-by: Jiri Slaby <jirislaby@kernel.org> Suggested-by: Ian Rogers <irogers@google.com> Reviewed-by: Ian Rogers <irogers@google.com> Tested-by: Jiri Slaby <jirislaby@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Howard Chu <howardchu95@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/lkml/6fe63fa3-6c63-4b75-ac09-884d26f6fb95@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2024-09-02igc: Unlock on error in igc_io_resume()Dan Carpenter
Call rtnl_unlock() on this error path, before returning. Fixes: bc23aa949aeb ("igc: Add pcie error handler support") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Gerhard Engleder <gerhard@engleder-embedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-09-02spi: bcm63xx: Enable module autoloadingLiao Chen
Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded based on the alias from of_device_id table. Signed-off-by: Liao Chen <liaochen4@huawei.com> Link: https://patch.msgid.link/20240831094231.795024-1-liaochen4@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-09-02net: microchip: vcap: Fix use-after-free error in kunit testJens Emil Schulz Østergaard
This is a clear use-after-free error. We remove it, and rely on checking the return code of vcap_del_rule. Reported-by: Dan Carpenter <error27@gmail.com> Closes: https://lore.kernel.org/kernel-janitors/7bffefc6-219a-4f71-baa0-ad4526e5c198@kili.mountain/ Fixes: c956b9b318d9 ("net: microchip: sparx5: Adding KUNIT tests of key/action values in VCAP API") Signed-off-by: Jens Emil Schulz Østergaard <jensemil.schulzostergaard@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-22 04:37:10 +0000