| Age | Commit message (Collapse) | Author |
|---|
|
OA exponent value of 0 is a valid value for periodic reports. Allow user
to pass 0 for the OA sampling interval since it gets converted to 2 gt
clock ticks.
v2: Update the check in xe_oa_stream_init as well (Ashutosh)
v3: Fix mi-rpc failure by setting default exponent to -1 (CI)
v4: Add the Fixes tag
Fixes: b6fd51c62119 ("drm/xe/oa/uapi: Define and parse OA stream properties")
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250221213352.1712932-1-umesh.nerlige.ramappa@intel.com
(cherry picked from commit 30341f0b8ea71725cc4ab2c43e3a3b749892fc92)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
The encoder HW/SW state verification should use a SW state which stays
unchanged while the encoder/output is active. The intel_dp::is_mst flag
used during state computation to choose between the DP SST/MST modes can
change while the output is active, if the sink gets disconnected or the
MST topology is removed for another reason. A subsequent state
verification using intel_dp::is_mst leads then to a mismatch if the
output is disabled/re-enabled without recomputing its state.
Use the encoder's active MST link count instead, which will be always
non-zero for an active MST output and will be zero for SST.
Fixes: 35d2e4b75649 ("drm/i915/ddi: start distinguishing 128b/132b SST and MST at state readout")
Fixes: 40d489fac0e8 ("drm/i915/ddi: handle 128b/132b SST in intel_ddi_read_func_ctl()")
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250224093242.1859583-1-imre.deak@intel.com
|
|
A low attr::freq value cannot be set via IOC_PERIOD on some platforms.
The perf_event_check_period() introduced in:
81ec3f3c4c4d ("perf/x86: Add check_period PMU callback")
was intended to check the period, rather than the frequency.
A low frequency may be mistakenly rejected by limit_period().
Fix it.
Fixes: 81ec3f3c4c4d ("perf/x86: Add check_period PMU callback")
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250117151913.3043942-2-kan.liang@linux.intel.com
Closes: https://lore.kernel.org/lkml/20250115154949.3147-1-ravi.bangoria@amd.com/
|
|
Perf doesn't work at low frequencies:
$ perf record -e cpu_core/instructions/ppp -F 120
Error:
The sys_perf_event_open() syscall returned with 22 (Invalid argument)
for event (cpu_core/instructions/ppp).
"dmesg | grep -i perf" may provide additional information.
The limit_period() check avoids a low sampling period on a counter. It
doesn't intend to limit the frequency.
The check in the x86_pmu_hw_config() should be limited to non-freq mode.
The attr.sample_period and attr.sample_freq are union. The
attr.sample_period should not be used to indicate the frequency mode.
Fixes: c46e665f0377 ("perf/x86: Add INST_RETIRED.ALL workarounds")
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250117151913.3043942-1-kan.liang@linux.intel.com
Closes: https://lore.kernel.org/lkml/20250115154949.3147-1-ravi.bangoria@amd.com/
|
|
Typically, SoundWire MIC and PCH DMIC will not coexist. However, we may
want to use both of them in some special cases. Add a warning to let
users know that SoundWire MIC and PCH DMIC are both present and they
could overwrite it with kernel params.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20250225093716.67240-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Currently, we assume that the PCH DMIC pins are pin-muxed with SoundWire
links. However, we do see a HW design that use PCH DMIC along with 3
SoundWire links. Remove the check now.
With this change the PCM DMIC will be presented if it is reported by the
BIOS irrespective of whether there are SDW links present or not.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20250225093716.67240-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Jason has been helping as reviewer for this area already, and has
contributed various features directly, notably BPF timestamping.
Also extend coverage to all timestamping tests, including those new
with BPF timestamping.
Link: https://lore.kernel.org/netdev/20250220072940.99994-1-kerneljasonxing@gmail.com/
Signed-off-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://patch.msgid.link/20250222172839.642079-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
We found an issue when using bpf_redirect with ipvs NAT mode after
commit ff70202b2d1a ("dev_forward_skb: do not scrub skb mark within
the same name space"). Particularly, we use bpf_redirect to return
the skb directly back to the netif it comes from, i.e., xnet is
false in skb_scrub_packet(), and then ipvs_property is preserved
and SNAT is skipped in the rx path.
ipvs_property has been already cleared when netns is changed in
commit 2b5ec1a5f973 ("netfilter/ipvs: clear ipvs_property flag when
SKB net namespace changed"). This patch just clears it in spite of
netns.
Fixes: 2b5ec1a5f973 ("netfilter/ipvs: clear ipvs_property flag when SKB net namespace changed")
Signed-off-by: Philo Lu <lulie@linux.alibaba.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Link: https://patch.msgid.link/20250222033518.126087-1-lulie@linux.alibaba.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
xfs_buf_stale already set b_lru_ref to 0, and thus prevents the buffer
from moving to the LRU. Remove the duplicate check.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
The buffer cache keeps a bt_io_count per-CPU counter to track all
in-flight I/O, which is used to ensure no I/O is in flight when
unmounting the file system.
For most I/O we already keep track of inflight I/O at higher levels:
- for synchronous I/O (xfs_buf_read/xfs_bwrite/xfs_buf_delwri_submit),
the caller has a reference and waits for I/O completions using
xfs_buf_iowait
- for xfs_buf_delwri_submit_nowait the only caller (AIL writeback)
tracks the log items that the buffer attached to
This only leaves only xfs_buf_readahead_map as a submitter of
asynchronous I/O that is not tracked by anything else. Replace the
bt_io_count per-cpu counter with a more specific bt_readahead_count
counter only tracking readahead I/O. This allows to simply increment
it when submitting readahead I/O and decrementing it when it completed,
and thus simplify xfs_buf_rele and remove the needed for the
XBF_NO_IOACCT flags and the XFS_BSTATE_IN_FLIGHT buffer state.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
xfs_buf_readahead_map is the only caller of xfs_buf_read_map and thus
_xfs_buf_read that is not synchronous. Split it from xfs_buf_read_map
so that the asynchronous path is self-contained and the now purely
synchronous xfs_buf_read_map / _xfs_buf_read implementation can be
simplified.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
Currently all metadata I/O completions happen in the m_buf_workqueue
workqueue. But for synchronous I/O (i.e. all buffer reads) there is no
need for that, as there always is a called in process context that is
waiting for the I/O. Factor out the guts of xfs_buf_ioend into a
separate helper and call it from xfs_buf_iowait to avoid a double
an extra context switch to the workqueue.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
params->total_weight is not initialized during bind and not updated when
the bound cdev changes. The cooling device weight will not be used due
to the uninitialized total_weight, until an update via sysfs is
triggered.
The bound cdevs are updated during thermal zone registration, where each
cooling device will be bound to the thermal zone one by one, but
power_allocator_bind() can be called without an additional cdev update
when manually changing the policy of a thermal zone via sysfs.
Add a new function to handle weight update logic, including updating
total_weight, and call it when bind, weight changes, and cdev updates to
ensure total_weight is always correct.
Fixes: a3cd6db4cc2e ("thermal: gov_power_allocator: Support new update callback of weights")
Signed-off-by: Yu-Che Cheng <giver@chromium.org>
Link: https://patch.msgid.link/20250222-fix-power-allocator-weight-v2-1-a94de86b685a@chromium.org
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Since thermal_of_should_bind() terminates the loop after processing
the first child found in cooling-maps, it will never match more than
one cdev to a given trip point which is incorrect, as there may be
cooling-maps associating one trip point with multiple cooling devices.
Address this by letting the loop continue until either all
children have been processed or a matching one has been found.
To avoid adding conditionals or goto statements, put the loop in
question into a separate function and make that function return
right away after finding a matching cooling-maps entry.
Fixes: 94c6110b0b13 ("thermal/of: Use the .should_bind() thermal zone callback")
Link: https://lore.kernel.org/linux-pm/20250219-fix-thermal-of-v1-1-de36e7a590c4@chromium.org/
Reported-by: Yu-Che Cheng <giver@chromium.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Yu-Che Cheng <giver@chromium.org>
Tested-by: Yu-Che Cheng <giver@chromium.org>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Tested-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://patch.msgid.link/2788228.mvXUDI8C0e@rjwysocki.net
|
|
Combine 'else' and 'if' conditional statements onto a single line and drop
unrequired braces, as is standard coding style.
The code had been like this since commit c3b0e880bbfa ("iomap: support
REQ_OP_ZONE_APPEND").
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20250224154538.548028-1-john.g.garry@oracle.com
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Backmerging to get fixes from v6.14-rc4.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
|
|
This is the display panel used for the touchbar on laptops that have it.
Co-developed-by: Nick Chan <towinchenmi@gmail.com>
Signed-off-by: Nick Chan <towinchenmi@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Sasha Finkelstein <fnkl.kernel@gmail.com>
Link: https://lore.kernel.org/r/20250217-adpdrm-v7-3-ca2e44b3c7d8@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250217-adpdrm-v7-3-ca2e44b3c7d8@gmail.com
|
|
Add support for the BOE AV123Z7M-N17 12.3" LVDS panel.
Signed-off-by: Maud Spierings <maudspierings@gocontroll.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250224-initial_display-v1-8-5ccbbf613543@gocontroll.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250224-initial_display-v1-8-5ccbbf613543@gocontroll.com
|
|
add support for the BOE AV101HDT-A10 10.1" LVDS panel
Signed-off-by: Maud Spierings <maudspierings@gocontroll.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250224-initial_display-v1-7-5ccbbf613543@gocontroll.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250224-initial_display-v1-7-5ccbbf613543@gocontroll.com
|
|
Add support for the BOE AV123Z7M-N17 12.3" LVDS panel.
Signed-off-by: Maud Spierings <maudspierings@gocontroll.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250224-initial_display-v1-2-5ccbbf613543@gocontroll.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250224-initial_display-v1-2-5ccbbf613543@gocontroll.com
|
|
add a compatible string for the BOE AV101HDT-A10 10.1" LVDS panel
Signed-off-by: Maud Spierings <maudspierings@gocontroll.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250224-initial_display-v1-1-5ccbbf613543@gocontroll.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250224-initial_display-v1-1-5ccbbf613543@gocontroll.com
|
|
Removes mipi_dsi_dcs_set_tear_off and replaces it with a
multi version as after replacing it in sony-td4353-jdi, it doesn't
appear anywhere else. sony-td4353-jdi is converted to use multi style
functions, including mipi_dsi_dcs_set_tear_off_multi.
Signed-off-by: Tejas Vipin <tejasvipin76@gmail.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20250220045721.145905-1-tejasvipin76@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250220045721.145905-1-tejasvipin76@gmail.com
|
|
Backmerge Linux 6.14-rc4 at the request of tzimmermann so misc-next
can base on rc4.
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
When an Icelake or Sapphire Rapids CPU isn't providing the maximum and
critical thresholds for particular DIMM the driver should return an
error to the userspace instead of giving it stale (best case) or wrong
(the structure contains all zeros after kzalloc() call) data.
The issue can be reproduced by binding the peci driver while the host is
fully booted and idle, this makes PECI interaction unreliable enough.
Fixes: 73bc1b885dae ("hwmon: peci: Add dimmtemp driver")
Fixes: 621995b6d795 ("hwmon: (peci/dimmtemp) Add Sapphire Rapids support")
Cc: stable@vger.kernel.org
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-by: Iwona Winiarska <iwona.winiarska@intel.com>
Link: https://lore.kernel.org/r/20250123122003.6010-1-fercerpav@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
There are conditions, albeit somewhat unlikely, under which right hand
expressions, calculating the end of time period in functions like
repaper_frame_fixed_repeat(), may overflow.
For instance, if 'factor10x' in repaper_get_temperature() is high
enough (170), as is 'epd->stage_time' in repaper_probe(), then the
resulting value of 'end' will not fit in unsigned int expression.
Mitigate this by casting 'epd->factored_stage_time' to wider type before
any multiplication is done.
Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.
Fixes: 3589211e9b03 ("drm/tinydrm: Add RePaper e-ink driver")
Cc: stable@vger.kernel.org
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Signed-off-by: Alex Lanzano <lanzano.alex@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250116134801.22067-1-n.zhandarovich@fintech.ru
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- A fix for cacheinfo DT probing to avoid reading non-boolean
properties as booleans.
- A fix for cpufeature to use bitmap_equal() instead of memcmp(), so
unused bits are ignored.
- Fixes for cmpxchg and futex cmpxchg that properly encode the sign
extension requirements on inline asm, which results in spurious
successes. This manifests in at least inode_set_ctime_current, but is
likely just a disaster waiting to happen.
- A fix for the rseq selftests, which was using an invalid constraint.
- A pair of fixes for signal frame size handling:
- We were reserving space for an extra empty extension context
header on systems with extended signal context, thus resulting in
unnecessarily large allocations.
- We weren't properly checking for available extensions before
calculating the signal stack size, which resulted in undersized
stack allocations on some systems (at least those with T-Head
custom vectors).
Also, we've added Alex as a reviewer. He's been helping out a ton
lately, thanks!
* tag 'riscv-for-linus-6.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
MAINTAINERS: Add myself as a riscv reviewer
riscv: signal: fix signal_minsigstksz
riscv: signal: fix signal frame size
rseq/selftests: Fix riscv rseq_offset_deref_addv inline asm
riscv/futex: sign extend compare value in atomic cmpxchg
riscv/atomic: Do proper sign extension also for unsigned in arch_cmpxchg
riscv: cpufeature: use bitmap_equal() instead of memcmp()
riscv: cacheinfo: Use of_property_present() for non-boolean properties
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mikulas Patocka:
- dm-vdo: add missing spin_lock_init
- dm-integrity: divide-by-zero fix
- dm-integrity: do not report unused entries in the table line
* tag 'for-6.14/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm vdo: add missing spin_lock_init
dm-integrity: Do not emit journal configuration in DM table for Inline mode
dm-integrity: Avoid divide by zero in table status in Inline mode
|
|
The PCI P2PDMA code will register the CMB block to the memory
hot-plugging subsystem, which have an alignment requirement. Memory
blocks that do not satisfy this alignment requirement (usually 2MB) will
lead to a WARNING from memory hotplugging.
Verify the CMB block's address and size against the alignment and only
try to send CMB blocks compatible with it to prevent this warning.
Tested on Intel DC D4502 SSD, which has a 512K CMB block that is too
small for memory hotplugging (thus PCI P2PDMA).
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Currently CONFIG_PWM is a bool but I intend to change it to tristate. If
CONFIG_PWM=m in the configuration, the cpp symbol CONFIG_PWM isn't
defined and so the PWM code paths in the ti-sn65dsi86 driver are not
used.
The correct way to check for CONFIG_PWM is using IS_REACHABLE which does
the right thing for all cases
CONFIG_DRM_TI_SN65DSI86 ∈ { y, m } x CONFIG_PWM ∈ { y, m, n }.
There is no change until CONFIG_PWM actually becomes tristate.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250217174936.758420-2-u.kleine-koenig@baylibre.com
|
|
CMB decoding should get disabled when the CMB block isn't successfully
registered to P2P DMA subsystem.
Clean up the CMBMSC register in this error handling codepath to disable
CMB decoding (and CMBLOC/CMBSZ registers).
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
nvme_tcp_poll() may race with the send path error handler because
it may complete the request while it is actively being polled for
completion, resulting in a UAF panic [1]:
We should make sure to stop polling when we see an error when
trying to read from the socket. Hence make sure to propagate the
error so that the block layer breaks the polling cycle.
[1]:
--
[35665.692310] nvme nvme2: failed to send request -13
[35665.702265] nvme nvme2: unsupported pdu type (3)
[35665.702272] BUG: kernel NULL pointer dereference, address: 0000000000000000
[35665.702542] nvme nvme2: queue 1 receive failed: -22
[35665.703209] #PF: supervisor write access in kernel mode
[35665.703213] #PF: error_code(0x0002) - not-present page
[35665.703214] PGD 8000003801cce067 P4D 8000003801cce067 PUD 37e6f79067 PMD 0
[35665.703220] Oops: 0002 [#1] SMP PTI
[35665.703658] nvme nvme2: starting error recovery
[35665.705809] Hardware name: Inspur aaabbb/YZMB-00882-104, BIOS 4.1.26 09/22/2022
[35665.705812] Workqueue: kblockd blk_mq_requeue_work
[35665.709172] RIP: 0010:_raw_spin_lock+0xc/0x30
[35665.715788] Call Trace:
[35665.716201] <TASK>
[35665.716613] ? show_trace_log_lvl+0x1c1/0x2d9
[35665.717049] ? show_trace_log_lvl+0x1c1/0x2d9
[35665.717457] ? blk_mq_request_bypass_insert+0x2c/0xb0
[35665.717950] ? __die_body.cold+0x8/0xd
[35665.718361] ? page_fault_oops+0xac/0x140
[35665.718749] ? blk_mq_start_request+0x30/0xf0
[35665.719144] ? nvme_tcp_queue_rq+0xc7/0x170 [nvme_tcp]
[35665.719547] ? exc_page_fault+0x62/0x130
[35665.719938] ? asm_exc_page_fault+0x22/0x30
[35665.720333] ? _raw_spin_lock+0xc/0x30
[35665.720723] blk_mq_request_bypass_insert+0x2c/0xb0
[35665.721101] blk_mq_requeue_work+0xa5/0x180
[35665.721451] process_one_work+0x1e8/0x390
[35665.721809] worker_thread+0x53/0x3d0
[35665.722159] ? process_one_work+0x390/0x390
[35665.722501] kthread+0x124/0x150
[35665.722849] ? set_kthread_struct+0x50/0x50
[35665.723182] ret_from_fork+0x1f/0x30
Reported-by: Zhang Guanghui <zhang.guanghui@cestc.cn>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Test XDP and HDS interaction. While at it add a test for using the IOCTL,
as that turned out to be the real culprit.
Testing bnxt:
# NETIF=eth0 ./ksft-net-drv/drivers/net/hds.py
KTAP version 1
1..12
ok 1 hds.get_hds
ok 2 hds.get_hds_thresh
ok 3 hds.set_hds_disable # SKIP disabling of HDS not supported by the device
ok 4 hds.set_hds_enable
ok 5 hds.set_hds_thresh_zero
ok 6 hds.set_hds_thresh_max
ok 7 hds.set_hds_thresh_gt
ok 8 hds.set_xdp
ok 9 hds.enabled_set_xdp
ok 10 hds.ioctl
ok 11 hds.ioctl_set_xdp
ok 12 hds.ioctl_enabled_set_xdp
# Totals: pass:11 fail:0 xfail:0 xpass:0 skip:1 error:0
and netdevsim:
# ./ksft-net-drv/drivers/net/hds.py
KTAP version 1
1..12
ok 1 hds.get_hds
ok 2 hds.get_hds_thresh
ok 3 hds.set_hds_disable
ok 4 hds.set_hds_enable
ok 5 hds.set_hds_thresh_zero
ok 6 hds.set_hds_thresh_max
ok 7 hds.set_hds_thresh_gt
ok 8 hds.set_xdp
ok 9 hds.enabled_set_xdp
ok 10 hds.ioctl
ok 11 hds.ioctl_set_xdp
ok 12 hds.ioctl_enabled_set_xdp
# Totals: pass:12 fail:0 xfail:0 xpass:0 skip:0 error:0
Netdevsim needs a sane default for tx/rx ring size.
ethtool 6.11 is needed for the --disable-netlink option.
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Tested-by: Taehee Yoo <ap420073@gmail.com>
Link: https://patch.msgid.link/20250221025141.1132944-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The legacy ioctl path does not have support for extended attributes.
So we issue a GET to fetch the current settings from the driver,
in an attempt to keep them unchanged. HDS is a bit "special" as
the GET only returns on/off while the SET takes a "ternary" argument
(on/off/default). If the driver was in the "default" setting -
executing the ioctl path binds it to on or off, even tho the user
did not intend to change HDS config.
Factor the relevant logic out of the netlink code and reuse it.
Fixes: 87c8f8496a05 ("bnxt_en: add support for tcp-data-split ethtool command")
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Tested-by: Daniel Xu <dxu@dxuuu.xyz>
Tested-by: Taehee Yoo <ap420073@gmail.com>
Link: https://patch.msgid.link/20250221025141.1132944-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
OA exponent value of 0 is a valid value for periodic reports. Allow user
to pass 0 for the OA sampling interval since it gets converted to 2 gt
clock ticks.
v2: Update the check in xe_oa_stream_init as well (Ashutosh)
v3: Fix mi-rpc failure by setting default exponent to -1 (CI)
v4: Add the Fixes tag
Fixes: b6fd51c62119 ("drm/xe/oa/uapi: Define and parse OA stream properties")
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250221213352.1712932-1-umesh.nerlige.ramappa@intel.com
|
|
kzalloc returns a valid pointer or NULL if the allocation fails.
It never returns an error pointer. It is better to check for NULL directly.
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250220001710.1803749-3-shuicheng.lin@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
The log should print with "offset" instead of "size".
Correct the typo in the comment.
v2: split kzalloc change and add typo fix in commit message (Lucas)
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250220001710.1803749-2-shuicheng.lin@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
When the engine events are created, acquire GT forcewake to read gpm
timestamp required for the events and release on event destroy. This
cannot be done during read due to the raw spinlock held my pmu.
v2: remove forcewake counting (Umesh)
v3: remove extra space (Umesh)
v4: use event pmu private data (Lucas)
free local copy (Umesh)
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250224053903.2253539-6-riana.tauro@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
PMU provides two counters (engine-active-ticks, engine-total-ticks)
to calculate engine activity. When querying engine activity,
user must group these 2 counters using the perf_event
group mechanism to ensure both counters are sampled together.
To list the events
./perf list
xe_0000_03_00.0/engine-active-ticks/ [Kernel PMU event]
xe_0000_03_00.0/engine-total-ticks/ [Kernel PMU event]
The formats to be used with the above are
engine_instance - config:12-19
engine_class - config:20-27
gt - config:60-63
The events can then be read using perf tool
./perf stat -e xe_0000_03_00.0/engine-active-ticks,gt=0,
engine_class=0,engine_instance=0/,
xe_0000_03_00.0/engine-total-ticks,gt=0,
engine_class=0,engine_instance=0/ -I 1000
Engine activity can then be calculated as below
engine activity % = (engine active ticks/engine total ticks) * 100
v2: validate gt
rename total-ticks to engine-total-ticks
add helper to get hwe (Umesh)
v3: fix checkpatch warning
add details to documentation (Umesh)
remove ascii formats from documentation (Lucas)
v4: remove unnecessary warn within raw_spinlock (Lucas)
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250224053903.2253539-5-riana.tauro@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Currently we treat EFAULT from hmm_range_fault() as a non-fatal error
when called from xe_vm_userptr_pin() with the idea that we want to avoid
killing the entire vm and chucking an error, under the assumption that
the user just did an unmap or something, and has no intention of
actually touching that memory from the GPU. At this point we have
already zapped the PTEs so any access should generate a page fault, and
if the pin fails there also it will then become fatal.
However it looks like it's possible for the userptr vma to still be on
the rebind list in preempt_rebind_work_func(), if we had to retry the
pin again due to something happening in the caller before we did the
rebind step, but in the meantime needing to re-validate the userptr and
this time hitting the EFAULT.
This explains an internal user report of hitting:
[ 191.738349] WARNING: CPU: 1 PID: 157 at drivers/gpu/drm/xe/xe_res_cursor.h:158 xe_pt_stage_bind.constprop.0+0x60a/0x6b0 [xe]
[ 191.738551] Workqueue: xe-ordered-wq preempt_rebind_work_func [xe]
[ 191.738616] RIP: 0010:xe_pt_stage_bind.constprop.0+0x60a/0x6b0 [xe]
[ 191.738690] Call Trace:
[ 191.738692] <TASK>
[ 191.738694] ? show_regs+0x69/0x80
[ 191.738698] ? __warn+0x93/0x1a0
[ 191.738703] ? xe_pt_stage_bind.constprop.0+0x60a/0x6b0 [xe]
[ 191.738759] ? report_bug+0x18f/0x1a0
[ 191.738764] ? handle_bug+0x63/0xa0
[ 191.738767] ? exc_invalid_op+0x19/0x70
[ 191.738770] ? asm_exc_invalid_op+0x1b/0x20
[ 191.738777] ? xe_pt_stage_bind.constprop.0+0x60a/0x6b0 [xe]
[ 191.738834] ? ret_from_fork_asm+0x1a/0x30
[ 191.738849] bind_op_prepare+0x105/0x7b0 [xe]
[ 191.738906] ? dma_resv_reserve_fences+0x301/0x380
[ 191.738912] xe_pt_update_ops_prepare+0x28c/0x4b0 [xe]
[ 191.738966] ? kmemleak_alloc+0x4b/0x80
[ 191.738973] ops_execute+0x188/0x9d0 [xe]
[ 191.739036] xe_vm_rebind+0x4ce/0x5a0 [xe]
[ 191.739098] ? trace_hardirqs_on+0x4d/0x60
[ 191.739112] preempt_rebind_work_func+0x76f/0xd00 [xe]
Followed by NPD, when running some workload, since the sg was never
actually populated but the vma is still marked for rebind when it should
be skipped for this special EFAULT case. This is confirmed to fix the
user report.
v2 (MattB):
- Move earlier.
v3 (MattB):
- Update the commit message to make it clear that this indeed fixes the
issue.
Fixes: 521db22a1d70 ("drm/xe: Invalidate userptr VMA on page pin fault")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: <stable@vger.kernel.org> # v6.10+
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250221143840.167150-5-matthew.auld@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 6b93cb98910c826c2e2004942f8b060311e43618)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
On error restore anything still on the pin_list back to the invalidation
list on error. For the actual pin, so long as the vma is tracked on
either list it should get picked up on the next pin, however it looks
possible for the vma to get nuked but still be present on this per vm
pin_list leading to corruption. An alternative might be then to instead
just remove the link when destroying the vma.
v2:
- Also add some asserts.
- Keep the overzealous locking so that we are consistent with the docs;
updating the docs and related bits will be done as a follow up.
Fixes: ed2bdf3b264d ("drm/xe/vm: Subclass userptr vmas")
Suggested-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: <stable@vger.kernel.org> # v6.8+
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250221143840.167150-4-matthew.auld@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 4e37e928928b730de9aa9a2f5dc853feeebc1742)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Engine activity is supported only on GuC submission version >= 1.14.1
Allow enabling/reading engine activity only on supported
GuC versions. Warn once if not supported.
v2: use guc interface version (John)
v3: use debug log (Umesh)
v4: use variable for supported and use gt logs
use a friendlier log message (Michal)
v5: fix kernel-doc
do not continue in init if not supported (Michal)
v6: remove hardcoding values (Michal)
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250224053903.2253539-4-riana.tauro@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Add engine activity related information to trace events for
better debuggability
v2: add trace for engine activity (Umesh)
v3: use hex for quanta_ratio
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250224053903.2253539-3-riana.tauro@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
GuC provides support to read engine counters to calculate the
engine activity. KMD exposes two counters via the PMU interface to
calculate engine activity
Engine Active Ticks(engine-active-ticks) - active ticks of engine
Engine Total Ticks (engine-total-ticks) - total ticks of engine
Engine activity percentage can be calculated as below
Engine activity % = (engine active ticks/engine total ticks) * 100.
v2: fix cosmetic review comments
add forcewake for gpm_ts (Umesh)
v3: fix CI hooks error
change function parameters and unpin bo on error
of allocate_activity_buffers
fix kernel-doc (Umesh)
use engine activity (Umesh, Lucas)
rename xe_engine_activity to xe_guc_engine_*
fix commit message to use engine activity (Lucas, Umesh)
v4: add forcewake in PMU layer
v5: fix makefile
use drmm_kcalloc instead of kmalloc_array
remove managed bo
skip init for VF
fix cosmetic review comments (Michal)
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250224053903.2253539-2-riana.tauro@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Marek has graciously offered to maintain the dma-mapping tree.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Joel will go back to maintain configfs alone on a time permitting basis.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
We triggered the following crash in syzkaller tests:
BUG: Bad page state in process syz.7.38 pfn:1eff3
page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1eff3
flags: 0x3fffff00004004(referenced|reserved|node=0|zone=1|lastcpupid=0x1fffff)
raw: 003fffff00004004 ffffe6c6c07bfcc8 ffffe6c6c07bfcc8 0000000000000000
raw: 0000000000000000 0000000000000000 00000000fffffffe 0000000000000000
page dumped because: PAGE_FLAGS_CHECK_AT_FREE flag(s) set
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x32/0x50
bad_page+0x69/0xf0
free_unref_page_prepare+0x401/0x500
free_unref_page+0x6d/0x1b0
uprobe_write_opcode+0x460/0x8e0
install_breakpoint.part.0+0x51/0x80
register_for_each_vma+0x1d9/0x2b0
__uprobe_register+0x245/0x300
bpf_uprobe_multi_link_attach+0x29b/0x4f0
link_create+0x1e2/0x280
__sys_bpf+0x75f/0xac0
__x64_sys_bpf+0x1a/0x30
do_syscall_64+0x56/0x100
entry_SYSCALL_64_after_hwframe+0x78/0xe2
BUG: Bad rss-counter state mm:00000000452453e0 type:MM_FILEPAGES val:-1
The following syzkaller test case can be used to reproduce:
r2 = creat(&(0x7f0000000000)='./file0\x00', 0x8)
write$nbd(r2, &(0x7f0000000580)=ANY=[], 0x10)
r4 = openat(0xffffffffffffff9c, &(0x7f0000000040)='./file0\x00', 0x42, 0x0)
mmap$IORING_OFF_SQ_RING(&(0x7f0000ffd000/0x3000)=nil, 0x3000, 0x0, 0x12, r4, 0x0)
r5 = userfaultfd(0x80801)
ioctl$UFFDIO_API(r5, 0xc018aa3f, &(0x7f0000000040)={0xaa, 0x20})
r6 = userfaultfd(0x80801)
ioctl$UFFDIO_API(r6, 0xc018aa3f, &(0x7f0000000140))
ioctl$UFFDIO_REGISTER(r6, 0xc020aa00, &(0x7f0000000100)={{&(0x7f0000ffc000/0x4000)=nil, 0x4000}, 0x2})
ioctl$UFFDIO_ZEROPAGE(r5, 0xc020aa04, &(0x7f0000000000)={{&(0x7f0000ffd000/0x1000)=nil, 0x1000}})
r7 = bpf$PROG_LOAD(0x5, &(0x7f0000000140)={0x2, 0x3, &(0x7f0000000200)=ANY=[@ANYBLOB="1800000000120000000000000000000095"], &(0x7f0000000000)='GPL\x00', 0x7, 0x0, 0x0, 0x0, 0x0, '\x00', 0x0, @fallback=0x30, 0xffffffffffffffff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x10, 0x0, @void, @value}, 0x94)
bpf$BPF_LINK_CREATE_XDP(0x1c, &(0x7f0000000040)={r7, 0x0, 0x30, 0x1e, @val=@uprobe_multi={&(0x7f0000000080)='./file0\x00', &(0x7f0000000100)=[0x2], 0x0, 0x0, 0x1}}, 0x40)
The cause is that zero pfn is set to the PTE without increasing the RSS
count in mfill_atomic_pte_zeropage() and the refcount of zero folio does
not increase accordingly. Then, the operation on the same pfn is performed
in uprobe_write_opcode()->__replace_page() to unconditional decrease the
RSS count and old_folio's refcount.
Therefore, two bugs are introduced:
1. The RSS count is incorrect, when process exit, the check_mm() report
error "Bad rss-count".
2. The reserved folio (zero folio) is freed when folio->refcount is zero,
then free_pages_prepare->free_page_is_bad() report error
"Bad page state".
There is more, the following warning could also theoretically be triggered:
__replace_page()
-> ...
-> folio_remove_rmap_pte()
-> VM_WARN_ON_FOLIO(is_zero_folio(folio), folio)
Considering that uprobe hit on the zero folio is a very rare case, just
reject zero old folio immediately after get_user_page_vma_remote().
[ mingo: Cleaned up the changelog ]
Fixes: 7396fa818d62 ("uprobes/core: Make background page replacement logic account for rss_stat counters")
Fixes: 2b1444983508 ("uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints")
Signed-off-by: Tong Tiangen <tongtiangen@huawei.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lore.kernel.org/r/20250224031149.1598949-1-tongtiangen@huawei.com
|
|
Doesn't look to be used.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250221143840.167150-6-matthew.auld@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Currently we treat EFAULT from hmm_range_fault() as a non-fatal error
when called from xe_vm_userptr_pin() with the idea that we want to avoid
killing the entire vm and chucking an error, under the assumption that
the user just did an unmap or something, and has no intention of
actually touching that memory from the GPU. At this point we have
already zapped the PTEs so any access should generate a page fault, and
if the pin fails there also it will then become fatal.
However it looks like it's possible for the userptr vma to still be on
the rebind list in preempt_rebind_work_func(), if we had to retry the
pin again due to something happening in the caller before we did the
rebind step, but in the meantime needing to re-validate the userptr and
this time hitting the EFAULT.
This explains an internal user report of hitting:
[ 191.738349] WARNING: CPU: 1 PID: 157 at drivers/gpu/drm/xe/xe_res_cursor.h:158 xe_pt_stage_bind.constprop.0+0x60a/0x6b0 [xe]
[ 191.738551] Workqueue: xe-ordered-wq preempt_rebind_work_func [xe]
[ 191.738616] RIP: 0010:xe_pt_stage_bind.constprop.0+0x60a/0x6b0 [xe]
[ 191.738690] Call Trace:
[ 191.738692] <TASK>
[ 191.738694] ? show_regs+0x69/0x80
[ 191.738698] ? __warn+0x93/0x1a0
[ 191.738703] ? xe_pt_stage_bind.constprop.0+0x60a/0x6b0 [xe]
[ 191.738759] ? report_bug+0x18f/0x1a0
[ 191.738764] ? handle_bug+0x63/0xa0
[ 191.738767] ? exc_invalid_op+0x19/0x70
[ 191.738770] ? asm_exc_invalid_op+0x1b/0x20
[ 191.738777] ? xe_pt_stage_bind.constprop.0+0x60a/0x6b0 [xe]
[ 191.738834] ? ret_from_fork_asm+0x1a/0x30
[ 191.738849] bind_op_prepare+0x105/0x7b0 [xe]
[ 191.738906] ? dma_resv_reserve_fences+0x301/0x380
[ 191.738912] xe_pt_update_ops_prepare+0x28c/0x4b0 [xe]
[ 191.738966] ? kmemleak_alloc+0x4b/0x80
[ 191.738973] ops_execute+0x188/0x9d0 [xe]
[ 191.739036] xe_vm_rebind+0x4ce/0x5a0 [xe]
[ 191.739098] ? trace_hardirqs_on+0x4d/0x60
[ 191.739112] preempt_rebind_work_func+0x76f/0xd00 [xe]
Followed by NPD, when running some workload, since the sg was never
actually populated but the vma is still marked for rebind when it should
be skipped for this special EFAULT case. This is confirmed to fix the
user report.
v2 (MattB):
- Move earlier.
v3 (MattB):
- Update the commit message to make it clear that this indeed fixes the
issue.
Fixes: 521db22a1d70 ("drm/xe: Invalidate userptr VMA on page pin fault")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: <stable@vger.kernel.org> # v6.10+
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250221143840.167150-5-matthew.auld@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
On error restore anything still on the pin_list back to the invalidation
list on error. For the actual pin, so long as the vma is tracked on
either list it should get picked up on the next pin, however it looks
possible for the vma to get nuked but still be present on this per vm
pin_list leading to corruption. An alternative might be then to instead
just remove the link when destroying the vma.
v2:
- Also add some asserts.
- Keep the overzealous locking so that we are consistent with the docs;
updating the docs and related bits will be done as a follow up.
Fixes: ed2bdf3b264d ("drm/xe/vm: Subclass userptr vmas")
Suggested-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: <stable@vger.kernel.org> # v6.8+
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250221143840.167150-4-matthew.auld@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
The sorting of VMAs by size in commit 7d442a33bfe8 ("binfmt_elf: Dump
smaller VMAs first in ELF cores") breaks elfutils[1]. Instead, sort
based on the setting of the new sysctl, core_sort_vma, which defaults
to 0, no sorting.
Reported-by: Michael Stapelberg <michael@stapelberg.ch>
Closes: https://lore.kernel.org/all/20250218085407.61126-1-michael@stapelberg.de/ [1]
Fixes: 7d442a33bfe8 ("binfmt_elf: Dump smaller VMAs first in ELF cores")
Signed-off-by: Kees Cook <kees@kernel.org>
|
