summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-11-16ARM: tegra: plutux: Enable HDMI outputThierry Reding
Enable the HDMI output found on Plutux boards. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-16ARM: tegra: tamonten: Add host1x supportThierry Reding
Hook up the required regulators, I2C DDC adapter and hotplug detect GPIO to the Tamonten HDMI output. Carrier boards still need to explicitly enable the output to use it. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-16ARM: tegra: trimslice: enable HDMI portThierry Reding
Enable host1x, and the HDMI output. Harmony also has a DVI port with an HDMI form-factor connector, driven by Tegra's LVDS output. This isn't enabled yet, due to potential issues with having multiple outputs enabled. Correct DDC I2C frequency to 100KHz. Add dummy/fixed regulators to satisfy the HDMI driver. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> [swarren: add commit description, remove enable of DVI port] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-16ARM: tegra: harmony: enable HDMI portStephen Warren
Enable host1x, and the HDMI output. Harmony also has an optional LCD, and a VGA output. The former isn't enabled due to potential issues with having multiple outputs enabled. The latter isn't enabled since the driver doesn't support VGA yet anyway. Correct DDC I2C frequency to 100KHz. Based on work by Thierry Reding for TrimSlice. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-16Merge tag 'imx-dt' of git://git.pengutronix.de/git/imx/linux-2.6 into next/dtArnd Bergmann
From Sascha Hauer <s.hauer@pengutronix.de>: ARM i.MX dt updates for 3.8 * tag 'imx-dt' of git://git.pengutronix.de/git/imx/linux-2.6: Add device tree file for the armadeus apf27 ARM i.MX: Add Ka-Ro TX25 devicetree ARM i.MX25: Add devicetree ARM i.MX25: Add devicetree support ARM i.MX25: Add missing clock gates Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-11-16ARM: at91/dts: evk-pro3: enable watchdogFabio Porcedda
Tested on evk-pro3. Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-11-16ARM: at91/dts: add at91sam9_wdt driver to at91sam926x, at91sam9g45Fabio Porcedda
Tested on an at91sam9260 board (evk-pro3). Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-11-16watchdog: at91sam9_wdt: add device tree supportFabio Porcedda
Tested on an at91sam9260 board (evk-pro3) Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-11-16ARM: at91: dt: evk-pro3: enable uart0 and uart2Fabio Porcedda
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-11-16Add device tree file for the armadeus apf27Philippe Reynes
Signed-off-by: Philippe Reynes <tremyfr@yahoo.fr> Signed-off-by: Eric Jarrige <eric.jarrige@armadeus.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-11-16ARM: mxs_defconfig: Improve USB related supportFabio Estevam
Select the following USB related options: - USB Ethernet adapter (needed for mx23-olinuxino) - Native language support (needed for mounting USB pen drives, for example) Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-11-16ARM: imx6q: select ARM and PL310 errataShawn Guo
ARM core r2p10 and PL310 r3p2 are integrated on imx6q. Select corresponding errata. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-11-16ARM: imx6q: print silicon version on bootShawn Guo
i.MX6Q has 3 revisions 1.0, 1.1 and 1.2. Print revision on boot. Signed-off-by: Drew Moseley <drew_moseley@mentor.com> [drew: add proper error checking for function imx6q_revision()] Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-11-16ARM i.MX dts: Consistently add labels to devicenodesSascha Hauer
Having labels before each node allows board bindings to reference to nodes by using the &nodename {} notation. This way boards do not have to resemble the whole devicetree layout. Due to less indention needed the board files also get better readability. Since the label make the documentation behind the nodes unnecessary it is removed. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-11-16ARM: dts: imx6q-sabresd: add volume up/down gpio keysLiu Ying
Add volume up/down gpio keys support in imx6q-sabresd.dts. Signed-off-by: Liu Ying <Ying.Liu@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-11-16ARM: dts: imx53: pinctl updateRoland Stigge
This patch supplements pinctl support on i.MX53. Signed-off-by: Roland Stigge <stigge@antcom.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-11-16ARM: imx: enable cpufreq for imx6qShawn Guo
It enables cpufreq support for imx6q with generic cpufreq-cpu0 driver. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-11-16ARM: dts: imx6q: enable snvs lp rtcShawn Guo
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-11-16ARM: dts: imx6q-sabreauto: Add basic supportFabio Estevam
mx6qsabreauto is a board based on mx6q SoC with the following features: - 2GB of DDR3 - 2 USB ports - 1 HDMI output port - SPI NOR - 2 LVDS LCD ports - Gigabit Ethernet - Camera - eMMC and SD card slot - Multichannel Audio - CAN - SATA - NAND - PCIE - Video Input Add very basic support for it. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-11-16ARM: imx6q: let users input debug uart port numberShawn Guo
imx6q gets 5 uart ports in total. Different board design may choose different port as debug uart. For example, imx6q-sabresd uses UART1, imx6q-sabrelite uses UART2 and imx6q-arm2 uses UART4. Rather than bloating DEBUG_LL choice list with all these uart ports, the patch introduces DEBUG_IMX6Q_UART_PORT for users to input uart port number when DEBUG_IMX6Q_UART is selected inside DEBUG_LL choice. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-11-16ARM: dts: imx53-qsb: Make DA9053 regulator functionalFabio Estevam
Setup the GPIO7_11 pin as interrupt to the DA9053 and also rename the regulator nodes so that they match with the datasheet. This allows probing of DA9053 to succeed. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-11-16ARM: dts: imx53-qsb: Use pinctrl for gpio-ledFabio Estevam
Since commit 8fe4554f (leds: leds-gpio: adopt pinctrl support) gpio-led driver has pinctrl support, so setup the gpio led pin via pinctrl and avoid the following warning: leds-gpio leds.2: pins are not configured from the driver Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-11-16ARM i.MX dtsi: Add default bus-width property for esdhc controllerSascha Hauer
According to Documentation/devicetree/bindings/mmc/mmc.txt bus-width is a mandatory property. While this is currently enforced nowhere, it's a good habit to just add the property now to allow to add common helper functionality for the mmc property parsing later. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-11-15ARM: tegra: Add Tegra30 host1x supportThierry Reding
Add the host1x node along with its children to the Tegra30 DTSI. Board- specific DTS files are expected to enable the available outputs and complement the device tree with data specific to the hardware. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-15ARM: tegra: Add Tegra20 host1x supportThierry Reding
Add the host1x node along with its children to the Tegra20 DTSI. Board- specific DTS files are expected to enable the available outputs and complement the device tree with data specific to the hardware. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-15ARM: tegra: trimslice: enable SPI flashStephen Warren
TrimSlice contains a 1MiB SPI flash. Represent this in the device tree. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-15ARM: tegra: dts: add sflash controller dt entryLaxman Dewangan
Nvidia's Tegra20 have the SPI (SFLASH) controller to interface with spi flash device which is used for system boot. Add DT entry for this controller. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> [swarren: move sflash node to keep file sorted] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-15ARM: tegra: ventana: Add NCT1008 temperature sensorThierry Reding
The Harmony board has an ON Semiconductors NCT1008 temperature sensor connected to the DVC bus. It can be used to monitor the ambient (local) and on-die (remote) temperatures. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-15ARM: tegra: tamonten: Add NCT1008 temperature sensorThierry Reding
The Tamonten SOM has an ON Semiconductor NCT1008 connected to the DVC bus which is used to measure the ambient (local) temperature as well as the on-die (remote) temperature. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-15ARM: tegra: harmony: Add ADT7641 temperature sensorThierry Reding
The Harmony board has an Analog Devices ADT7461 temperature sensor connected to the DVC bus. It can be used to monitor the ambient (local) and on-die (remote) temperatures. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-15ARM: tegra: tec: Remove redundant DT propertiesThierry Reding
These properties are already set by the tegra20-tamonten.dtsi, so they don't need to be repeated. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-15ARM: tegra: tamonten: Add DDC/PTA pinmuxThierry Reding
This commit allows the I2C2 controller on Tegra20 to be routed either to the DDC or the PTA pin group at runtime. On Tamonten this allows the I2C bus to be used for the DDC of the HDMI connector or to access I2C chips on the carrier board. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-15ARM: tegra: dts: cardhu: enable SLINK4Laxman Dewangan
Enable SLINK4 and connected device in Tegra30 based platform Cardhu. Setting maximum spi frequency to 25MHz. SPI serial flash is connected on CS1 of SLINK4 on cardhu platform. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> [swarren: swapped reg/compatible order to be consistent] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-15ARM: tegra: dts: add slink controller dt entryLaxman Dewangan
Add slink controller details in the dts file of Tegra20 and Tegra30. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-15ARM: dt: tegra: ventana: define pinmux for ddcMark Zhang
Tegra 2's I2C2 controller can be routed to either the PTA or DDC pin group on Ventana. So: - Remove the HDMI function definition of pta pingroup - Define child i2c adapters(ddc & pta) for I2C2 controller Signed-off-by: Mark Zhang <markz@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-15ARM: dt: t30 cardhu: set pinmux and power for wlanWei Ni
Configure pinmux as required for WiFi. Enable the SDHCI1 controller for a02 and a04 board, which is connected to the WiFi module. For now, always enable the regulator that provides power to the Wifi module. Signed-off-by: Wei Ni <wni@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-15ARM: dt: t20 ventana: set pinmux and power for wlanWei Ni
Configure pinmux as required for WiFi. Enable the SDHCI1 controller, which is connectted to the WiFi module. Signed-off-by: Wei Ni <wni@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-15ARM: dt: t20 seaboard: turn on the power for wlanWei Ni
Enable the SDHCI1 controller. This is connected to the WiFi module. Signed-off-by: Wei Ni <wni@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-15ARM: tegra: Add Tegra30 host1x clock supportThierry Reding
Setup the clock parents for the two display controllers and HDMI. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-15ARM: tegra: Add AUXDATA for Tegra30 host1xThierry Reding
Add the OF_DEV_AUXDATA table entries required to associate the proper names with host1x and its children. In turn, this allows the devices to find the required clocks. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-15ARM: tegra: Add Tegra20 host1x clock supportThierry Reding
Extend the pll_d frequency table with a few entries to support common HDMI and LVDS display modes and setup the clock parents for the two display controllers and HDMI. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-15ARM: tegra: Add AUXDATA for Tegra20 host1xThierry Reding
Add the OF_DEV_AUXDATA table entries required to associate the proper names with host1x and its children. In turn, this allows the devices to find the required clocks. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-15ARM: tegra: Tegra30 speedo-based process identificationDanny Huang
This patch adds speedo-based process identification support for Tegra30. Signed-off-by: Danny Huang <dahuang@nvidia.com> [swarren s/Tegra3/Tegra30/ in log print, s/T30/Tegra30/ in commit description] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-15ARM: tegra: Add speedo-based process identificationDanny Huang
Detect CPU and core process ID by checking speedo corner tables. This can provide a more accurate process ID. Signed-off-by: Danny Huang <dahuang@nvidia.com> [swarren s/Tegra2/Tegra20/ in log print] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-15ARM: tegra: flexible spare fuse read functionDanny Huang
Change the spare fuse base from a definition to a variable. It provides flexibilty to read spare fuse on different chip. Signed-off-by: Danny Huang <dahuang@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-15Merge branch 'omap/cleanup-prcm-part2' into next/dtArnd Bergmann
This resolves a nontrivial conflict where the omap_prcm_restart is removed in one branch but another use is added in another branch. Conflicts: arch/arm/mach-omap2/cm33xx.c arch/arm/mach-omap2/io.c arch/arm/mach-omap2/prm_common.c Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-11-15Merge tag 'omap-for-v3.8/dt-signed' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt From Tony Lindgren <tony@atomide.com>: Device tree related changes for omaps updating the various .dts files, and timer related changes to allow configuring the timer via device tree. * tag 'omap-for-v3.8/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (48 commits) usb: musb: dsps: dt binding - add resources, example ARM: dts: omap4-sdp: Add pinmux configuration for HDMI ARM: dts: omap4-panda: Add pinmux configuration for HDMI ARM: dts: Makefile: Add the am335x-evmsk target in dtbs list ARM: dts: AM33XX: Add usbss node ARM: dts: AM33XX: Add push-buttons device tree data to am335x-evmsk ARM: dts: AM33XX: Add pinmux configuration for gpio-keys to EVMSK ARM: dts: AM33XX: Add user-leds device tree data to am335x-evmsk ARM: dts: AM33XX: Add pinmux configuration for gpio-leds to EVMSK ARM: dts: AM33XX: Add user-leds device tree data to am335x-bone ARM: dts: AM33XX: Add pinmux configuration for user-leds to BONE ARM: dts: AM33XX: Add volume-keys device tree data to am335x-evm ARM: dts: AM33XX: Add pinmux configuration for volume-keys to EVM ARM: dts: AM33XX: Add matrix keypad device tree data to am335x-evm ARM: dts: AM33XX: Add pinmux configuration for matrix keypad to EVM ARM: dts: omap5-evm: LPDDR2 memory device details for EVM ARM: dts: omap5: EMIF device tree data for OMAP5 boards ARM: dts: omap5-evm: Fix size of memory defined for EVM ARM: OMAP2+: Add device-tree support for 32kHz counter ARM: OMAP: Add DT support for timer driver ... Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-11-15Merge branch 'omap/headers4' into next/dtArnd Bergmann
These changes are needed for the following omap DT changes Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-11-14ARM: tegra: Implement 6395/1 for TegraPeter De Schrijver
This patch implements ARM linux patch 6395/1 for Tegra. See commit 1a8e41c "ARM: 6395/1: VExpress: Set bit 22 in the PL310 (cache controller) AuxCtlr register" for details. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> [swarren: added commit subject for referenced patch] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-14ARM: zynq: add clk binding support to the ttcJosh Cartwright
Add support for retrieving TTC configuration from device tree. This includes the ability to pull information about the driving clocks from the of_clk bindings. Signed-off-by: Josh Cartwright <josh.cartwright@ni.com> Acked-by: Michal Simek <michal.simek@xilinx.com>
generated by cgit (git 2.34.1) at 2025-09-29 10:08:02 +0000