| Age | Commit message (Collapse) | Author |
|---|
|
QAT devices perform an additional integrity check during compression by
decompressing the output. Starting from QAT GEN4, this verification is
done in-line by the hardware. However, on GEN2 devices, the hardware
reads back the compressed output from the destination buffer and performs
a decompression operation using it as the source.
In the current QAT driver, destination buffers are always marked as
write-only. This is incorrect for QAT GEN2 compression, where the buffer
is also read during verification. Since commit 6f5dc7658094
("iommu/vt-d: Restore WO permissions on second-level paging entries"),
merged in v6.16-rc1, write-only permissions are strictly enforced, leading
to DMAR errors when using QAT GEN2 devices for compression, if VT-d is
enabled.
Mark the destination buffers as DMA_BIDIRECTIONAL. This ensures
compatibility with GEN2 devices, even though it is not required for
QAT GEN4 and later.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Fixes: cf5bb835b7c8 ("crypto: qat - fix DMA transfer direction")
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The ARRAY_SIZE macro is already defined in linux/array_size.h
This patch replaces the ARRAY_SIZE definition in jitterentropy.c with
an include, to make the code cleaner, and help reduce the number of
duplicate ARRAY_SIZE definitions in the codebase.
Signed-off-by: Ruben Wauters <rubenru09@aol.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The {prepare,unprepare}_crypt_hardware callbacks were added back in 2016
by commit 735d37b5424b ("crypto: engine - Introduce the block request
crypto engine framework"), but they were never implemented by any driver.
Remove them as they are unused.
Since the 'engine->idling' and 'was_busy' flags are no longer needed,
remove them as well.
Signed-off-by: Ovidiu Panait <ovidiu.panait.oss@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Remove request batching support from crypto_engine, as there are no
drivers using this feature and it doesn't really work that well.
Instead of doing batching based on backlog, a more optimal approach
would be for the user to handle the batching (similar to how IPsec
can hook into GSO to get 64K of data each time or how block encryption
can use unit sizes much greater than 4K).
Suggested-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Ovidiu Panait <ovidiu.panait.oss@gmail.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Repeated loading and unloading of a device specific QAT driver, for
example qat_4xxx, in a tight loop can lead to a crash due to a
use-after-free scenario. This occurs when a power management (PM)
interrupt triggers just before the device-specific driver (e.g.,
qat_4xxx.ko) is unloaded, while the core driver (intel_qat.ko) remains
loaded.
Since the driver uses a shared workqueue (`qat_misc_wq`) across all
devices and owned by intel_qat.ko, a deferred routine from the
device-specific driver may still be pending in the queue. If this
routine executes after the driver is unloaded, it can dereference freed
memory, resulting in a page fault and kernel crash like the following:
BUG: unable to handle page fault for address: ffa000002e50a01c
#PF: supervisor read access in kernel mode
RIP: 0010:pm_bh_handler+0x1d2/0x250 [intel_qat]
Call Trace:
pm_bh_handler+0x1d2/0x250 [intel_qat]
process_one_work+0x171/0x340
worker_thread+0x277/0x3a0
kthread+0xf0/0x120
ret_from_fork+0x2d/0x50
To prevent this, flush the misc workqueue during device shutdown to
ensure that all pending work items are completed before the driver is
unloaded.
Note: This approach may slightly increase shutdown latency if the
workqueue contains jobs from other devices, but it ensures correctness
and stability.
Fixes: e5745f34113b ("crypto: qat - enable power management for QAT GEN4")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add support for enabling rate limiting(RL) feature for QAT GEN6 by
initializing the rl_data member in adf_hw_device_data structure.
Implement init_num_svc_aes() for GEN6 which will populate the number of
AEs associated with the RL service type.
Implement adf_gen6_get_svc_slice_cnt() for GEN6 which will return
the slice count that can support the RL service type.
Co-developed-by: George Abraham P <george.abraham.p@intel.com>
Signed-off-by: George Abraham P <george.abraham.p@intel.com>
Signed-off-by: Suman Kumar Chakraborty <suman.kumar.chakraborty@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
In QAT GEN4 devices, the compression slice count was tracked using the
dcpr_cnt field.
Introduce a new cpr_cnt field in the rate limiting (RL) infrastructure to
track the compression (CPR) slice count independently. The cpr_cnt value is
populated via the RL_INIT admin message.
The existing dcpr_cnt field will now be used exclusively to cache the
decompression slice count, ensuring a clear separation between compression
and decompression tracking.
Signed-off-by: Suman Kumar Chakraborty <suman.kumar.chakraborty@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Enhance the adf_hw_device_data structure by introducing a new callback
function get_svc_slice_cnt(), which provides a mechanism to query the
total number of accelerator available on the device for a specific
service.
Implement adf_gen4_get_svc_slice_cnt() for QAT GEN4 devices to support this
new interface. This function returns the total accelerator count for a
specific service.
Co-developed-by: George Abraham P <george.abraham.p@intel.com>
Signed-off-by: George Abraham P <george.abraham.p@intel.com>
Signed-off-by: Suman Kumar Chakraborty <suman.kumar.chakraborty@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Enhance the rate limiting (RL) infrastructure by adding
adf_rl_get_num_svc_aes() which can be used to fetch the number of engines
associated with the service type. Expand the structure adf_rl_hw_data
with an array that contains the number of AEs per service.
Implement adf_gen4_init_num_svc_aes() for QAT GEN4 devices to calculate
the total number of acceleration engines dedicated to a specific service.
Signed-off-by: Suman Kumar Chakraborty <suman.kumar.chakraborty@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Rename (1) is_service_enabled() to adf_is_service_enabled(), and
(2) srv_to_cfg_svc_type() to adf_srv_to_cfg_svc_type(), and move them to
adf_cfg_services.c which is the appropriate place for configuration-related
service logic. This improves code organization and modularity by grouping
related service configuration logic in a single location.
Signed-off-by: Suman Kumar Chakraborty <suman.kumar.chakraborty@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The enums `adf_base_services` (used in rate limiting) and `adf_services`
define the same values, resulting in code duplication.
To improve consistency across the QAT driver: (1) rename `adf_services`
to `adf_base_services` in adf_cfg_services.c to better reflect its role
in defining core services (those with dedicated accelerators),
(2) introduce a new `adf_extended_services` enum starting from
`SVC_BASE_COUNT`, and move `SVC_DCC` into it, as it represents an
extended service (DC with chaining), and (3) remove the redundant
`adf_base_services` enum from the rate limiting implementation.
This does not introduce any functional change.
Signed-off-by: Suman Kumar Chakraborty <suman.kumar.chakraborty@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add a new base service type ADF_SVC_DECOMP to the QAT rate limiting (RL)
infrastructure. This enables RL support for the decompression (DECOMP)
service type, allowing service-level agreements (SLAs) to be enforced
when decompression is configured.
The new service is exposed in the sysfs RL service list for visibility.
Note that this support is applicable only to devices that provide the
decompression service, such as QAT GEN6 devices.
Signed-off-by: Suman Kumar Chakraborty <suman.kumar.chakraborty@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The sysfs interface 'qat_rl/srv' currently allows all valid services,
even if a service is not configured for the device. This leads to a failure
when attempting to add the SLA using 'qat_rl/sla_op'.
Add a check using is_service_enabled() to ensure the requested service is
enabled. If not, return -EINVAL to prevent invalid configurations.
Signed-off-by: Suman Kumar Chakraborty <suman.kumar.chakraborty@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch introduces a hierarchical backlog mechanism to cache
user data in high-throughput encryption/decryption scenarios,
the implementation addresses packet loss issues when hardware
queues overflow during peak loads.
First, we use sec_alloc_req_id to obtain an exclusive resource
from the pre-allocated resource pool of each queue, if no resource
is allocated, perform the DMA map operation on the request memory.
When the task is ready, we will attempt to send it to the hardware,
if the hardware queue is already full, we cache the request into
the backlog list, then return an EBUSY status to the upper layer
and instruct the packet-sending thread to pause transmission.
Simultaneously, when the hardware completes a task, it triggers
the sec callback function, within this function, reattempt to send
the requests from the backlog list and wake up the sending thread
until the hardware queue becomes fully occupied again.
In addition, it handles such exceptions like the hardware is reset
when packets are sent, it will switch to the software computing
and release occupied resources.
Signed-off-by: Wenkai Lin <linwenkai6@hisilicon.com>
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Expands telemetry documentation for supporting QAT GEN6 device. Introduces
new parameters to capture compression, decompression slice utilization and
execution count.
Co-developed-by: George Abraham P <george.abraham.p@intel.com>
Signed-off-by: George Abraham P <george.abraham.p@intel.com>
Signed-off-by: Vijay Sundar Selvamani <vijay.sundar.selvamani@intel.com>
Signed-off-by: Suman Kumar Chakraborty <suman.kumar.chakraborty@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Enable telemetry for QAT GEN6 devices by defining the firmware data
structures layouts, implementing the counters parsing logic and setting
the required properties on the adf_tl_hw_data data structure.
As for QAT GEN4, telemetry counters are exposed via debugfs using the
interface described in Documentation/ABI/testing/debugfs-driver-qat_telemetry.
Co-developed-by: George Abraham P <george.abraham.p@intel.com>
Signed-off-by: George Abraham P <george.abraham.p@intel.com>
Signed-off-by: Vijay Sundar Selvamani <vijay.sundar.selvamani@intel.com>
Signed-off-by: Suman Kumar Chakraborty <suman.kumar.chakraborty@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
QAT GEN6 devices offer decompression as an additional service.
Update the telemetry ring pair service interface to support monitoring
decompression operations.
Co-developed-by: George Abraham P <george.abraham.p@intel.com>
Signed-off-by: George Abraham P <george.abraham.p@intel.com>
Signed-off-by: Vijay Sundar Selvamani <vijay.sundar.selvamani@intel.com>
Signed-off-by: Suman Kumar Chakraborty <suman.kumar.chakraborty@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Fix a leak reported by kmemleak:
unreferenced object 0xffff8880093bf7a0 (size 32):
comm "swapper/0", pid 1, jiffies 4294877529
hex dump (first 32 bytes):
9d 18 86 16 f6 38 52 fe 86 91 5b b8 40 b4 a8 86 .....8R...[.@...
ff 3e 6b b0 f8 19 b4 9b 89 33 93 d3 93 85 42 95 .>k......3....B.
backtrace (crc 8ba12f3b):
kmemleak_alloc+0x8d/0xa0
__kmalloc_noprof+0x3cd/0x4d0
prep_buf+0x36/0x70
load_buf+0x10d/0x1c0
krb5_test_one_prf+0x1e1/0x3c0
krb5_selftest.cold+0x7c/0x54c
crypto_krb5_init+0xd/0x20
do_one_initcall+0xa5/0x230
do_initcalls+0x213/0x250
kernel_init_freeable+0x220/0x260
kernel_init+0x1d/0x170
ret_from_fork+0x301/0x410
ret_from_fork_asm+0x1a/0x30
Fixes: fc0cf10c04f4 ("crypto/krb5: Implement crypto self-testing")
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
To avoid a crash when control flow integrity is enabled, make the
workspace ("stream") free function use a consistent type, and call it
through a function pointer that has that same type.
Fixes: 42d9f6c77479 ("crypto: acomp - Move scomp stream allocation code into acomp")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The skcipher_walk functions can allocate memory and can fail, so
checking for errors is necessary.
Fixes: 1d373d4e8e15 ("crypto: x86 - Add optimized AEGIS implementations")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
skcipher_walk_done() can call kfree(), which takes a spinlock, which
makes it incorrect to call while preemption is disabled on PREEMPT_RT.
Therefore, end the kernel-mode FPU section before calling
skcipher_walk_done(), and restart it afterwards.
Moreover, pass atomic=false to skcipher_walk_aead_encrypt() instead of
atomic=true. The point of atomic=true was to make skcipher_walk_done()
safe to call while in a kernel-mode FPU section, but that does not
actually work. So just use the usual atomic=false.
Fixes: 1d373d4e8e15 ("crypto: x86 - Add optimized AEGIS implementations")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The QAT driver includes infrastructure to report power management (PM)
information via debugfs. Extend this support to QAT GEN6 devices
by exposing PM debug data through the `pm_status` file.
This implementation reports the current PM state, power management
hardware control and status registers (CSR), and per-domain power
status specific to the QAT GEN6 architecture.
The debug functionality is implemented in adf_gen6_pm_dbgfs.c
and initialized as part of the enable_pm() function.
Co-developed-by: Vijay Sundar Selvamani <vijay.sundar.selvamani@intel.com>
Signed-off-by: Vijay Sundar Selvamani <vijay.sundar.selvamani@intel.com>
Signed-off-by: George Abraham P <george.abraham.p@intel.com>
Signed-off-by: Suman Kumar Chakraborty <suman.kumar.chakraborty@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Relocate the power management debugfs helper APIs in a common file
adf_pm_dbgfs_utils.h and adf_pm_dbgfs_utils.c so that it can be shared
between device generations.
When moving logic from adf_gen4_pm_debugfs.c to adf_pm_dbgfs_utils.c, the
include kernel.h has been replaced with the required include.
This does not introduce any functional change.
Signed-off-by: George Abraham P <george.abraham.p@intel.com>
Signed-off-by: Suman Kumar Chakraborty <suman.kumar.chakraborty@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The TCVCMAP (Traffic Class to Virtual Channel Mapping) field in the
PVC0CTL and PVC1CTL register controls how traffic classes are mapped to
virtual channels in QAT GEN6 hardware.
The driver previously wrote a default TCVCMAP value to this register, but
this configuration was incorrect.
Modify the TCVCMAP configuration to explicitly enable both VC0 and VC1,
and map Traffic Classes 0 to 7 → VC0 and Traffic Class 8 → VC1.
Replace FIELD_PREP() with FIELD_MODIFY() to ensure that only the intended
TCVCMAP field is updated, preserving other bits in the register. This
prevents unintended overwrites of unrelated configuration fields when
modifying TC to VC mappings.
Fixes: 17fd7514ae68 ("crypto: qat - add qat_6xxx driver")
Signed-off-by: Suman Kumar Chakraborty <suman.kumar.chakraborty@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
pm_runtime_put_autosuspend(), pm_runtime_put_sync_autosuspend(),
pm_runtime_autosuspend() and pm_request_autosuspend() now include a call
to pm_runtime_mark_last_busy(). Remove the now-reduntant explicit call to
pm_runtime_mark_last_busy().
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
pm_runtime_put_autosuspend(), pm_runtime_put_sync_autosuspend(),
pm_runtime_autosuspend() and pm_request_autosuspend() now include a call
to pm_runtime_mark_last_busy(). Remove the now-reduntant explicit call to
pm_runtime_mark_last_busy().
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
In the Makefile, the new build option CONFIG_CAAM_QI is defined conditioned
on the existence of the CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API_QI, which is
properly defined in the Kconfig file. So, CONFIG_CAAM_QI is just a local
alias for CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API_QI.
There is little benefit in the source code of having this slightly shorter
alias for this configuration, but it complicates further maintenance, as
searching for the impact of CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API_QI
requires to grep once, and then identify the option introduced and continue
searching for that. Further, tools, such as cross referencers, and scripts
to check Kconfig definitions and their use simply do not handle this
situation. Given that this is the only incidence of such a config alias in
the whole kernel tree, just prefer to avoid this pattern of aliasing here.
Use CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API_QI throughout the Freescale
CAAM-Multicore platform driver backend source code.
No functional change.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@redhat.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The current implementation of the QAT live migration enablers is exclusive
to QAT GEN4 devices and resides within QAT GEN4 specific files. However,
the underlying mechanisms, such as the relevant CSRs and offsets,
can be shared between QAT GEN4 and QAT GEN6 devices.
Add the necessary enablers required to implement live migration for QAT
GEN6 devices to the abstraction layer to allow leveraging the existing
QAT GEN4 implementation.
Signed-off-by: Małgorzata Mielnik <malgorzata.mielnik@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The `bank_state` structure represents the state of a bank of rings.
As part of recent refactoring, the functions that interact with this
structure have been moved to a new unit, adf_bank_state.c.
To align with this reorganization, rename `struct bank_state` to
`struct adf_bank_state` and move its definition to adf_bank_state.h.
Also relocate the associated `struct ring_config` to the same header
to consolidate related definitions.
Update all references to use the new structure name.
This does not introduce any functional change.
Signed-off-by: Suman Kumar Chakraborty <suman.kumar.chakraborty@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The existing implementation of bank state management functions,
including saving and restoring state, is located within 4xxx device
files. However, these functions do not contain GEN4-specific code and
are applicable to other QAT generations.
Relocate the bank state management functions to a new file,
adf_bank_state.c, and rename them removing the `gen4` prefix. This change
enables the reuse of such functions across different QAT generations.
Add documentation to bank state related functions that were
moved from QAT 4xxx specific files to common files.
This does not introduce any functional change.
Signed-off-by: Małgorzata Mielnik <malgorzata.mielnik@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The macro CHECK_STAT is used to check that all ring statuses match the
saved state during restoring the state of bank.
Replace the CHECK_STAT macro with the static inline function `check_stat()`
to improve type safety, readability, and debuggability.
This does not introduce any functional change.
Signed-off-by: Suman Kumar Chakraborty <suman.kumar.chakraborty@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add pr_fmt() to adf_gen4_hw_data.c logging and update the debug and error
messages to utilize it accordingly.
This does not introduce any functional changes.
Signed-off-by: Suman Kumar Chakraborty <suman.kumar.chakraborty@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
cryptd_queue::cryptd_cpu_queue is a per-CPU variable and relies on
disabled BH for its locking. Without per-CPU locking in
local_bh_disable() on PREEMPT_RT this data structure requires explicit
locking.
Add a local_lock_t to the struct cryptd_cpu_queue and use
local_lock_nested_bh() for locking. This change adds only lockdep
coverage and does not alter the functional behaviour for !PREEMPT_RT.
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: linux-crypto@vger.kernel.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The ZUC-256 EEA (encryption) and EIA (integrity) algorithms are not
supported on QAT GEN5 devices, as their current implementation does not
align with the NIST specification. Earlier versions of the ZUC-256
specification used a different initialization scheme, which has since
been revised to comply with the 5G specification.
Due to this misalignment with the updated specification, remove support
for ZUC-256 EEA and EIA for QAT GEN5 by masking out the ZUC-256
capability.
Fixes: fcf60f4bcf549 ("crypto: qat - add support for 420xx devices")
Signed-off-by: Bairavi Alagappan <bairavix.alagappan@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The dma_unmap_sg() functions should be called with the same nents as the
dma_map_sg(), not the value the map function returned.
Fixes: d358f1abbf71 ("crypto: img-hash - Add Imagination Technologies hw hash accelerator")
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The dma_unmap_sg() functions should be called with the same nents as the
dma_map_sg(), not the value the map function returned.
Fixes: 472b04444cd3 ("crypto: keembay - Add Keem Bay OCS HCU driver")
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Although unlikely, devm_pm_runtime_enable() call might fail, so handle
the return value.
Fixes: 78cb66caa6ab ("hwrng: mtk - Use devm_pm_runtime_enable")
Signed-off-by: Ovidiu Panait <ovidiu.panait.oss@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into head
Local lock changes required by net/crypto
|
|
Replace the deprecated zero-length array with a modern flexible array
member in the struct zstd_ctx.
No functional changes intended.
Link: https://github.com/KSPP/linux/issues/78
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Kees Cook <kees@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Fix the following warnings reported by the static analyzer Smatch:
crypto/zstd.c:273 zstd_decompress()
warn: duplicate check 'scur' (previous on line 235)
Fixes: f5ad93ffb541 ("crypto: zstd - convert to acomp")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/linux-crypto/92929e50-5650-40be-8c0a-de81e77f0acf@sabinyo.mountain/
Signed-off-by: Suman Kumar Chakraborty <suman.kumar.chakraborty@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
When CONFIG_CRYPTO_DEV_CCP_DEBUGFS is enabled, rebinding
the ccp device causes the following crash:
$ echo '0000:0a:00.2' > /sys/bus/pci/drivers/ccp/unbind
$ echo '0000:0a:00.2' > /sys/bus/pci/drivers/ccp/bind
[ 204.976930] BUG: kernel NULL pointer dereference, address: 0000000000000098
[ 204.978026] #PF: supervisor write access in kernel mode
[ 204.979126] #PF: error_code(0x0002) - not-present page
[ 204.980226] PGD 0 P4D 0
[ 204.981317] Oops: Oops: 0002 [#1] SMP NOPTI
...
[ 204.997852] Call Trace:
[ 204.999074] <TASK>
[ 205.000297] start_creating+0x9f/0x1c0
[ 205.001533] debugfs_create_dir+0x1f/0x170
[ 205.002769] ? srso_return_thunk+0x5/0x5f
[ 205.004000] ccp5_debugfs_setup+0x87/0x170 [ccp]
[ 205.005241] ccp5_init+0x8b2/0x960 [ccp]
[ 205.006469] ccp_dev_init+0xd4/0x150 [ccp]
[ 205.007709] sp_init+0x5f/0x80 [ccp]
[ 205.008942] sp_pci_probe+0x283/0x2e0 [ccp]
[ 205.010165] ? srso_return_thunk+0x5/0x5f
[ 205.011376] local_pci_probe+0x4f/0xb0
[ 205.012584] pci_device_probe+0xdb/0x230
[ 205.013810] really_probe+0xed/0x380
[ 205.015024] __driver_probe_device+0x7e/0x160
[ 205.016240] device_driver_attach+0x2f/0x60
[ 205.017457] bind_store+0x7c/0xb0
[ 205.018663] drv_attr_store+0x28/0x40
[ 205.019868] sysfs_kf_write+0x5f/0x70
[ 205.021065] kernfs_fop_write_iter+0x145/0x1d0
[ 205.022267] vfs_write+0x308/0x440
[ 205.023453] ksys_write+0x6d/0xe0
[ 205.024616] __x64_sys_write+0x1e/0x30
[ 205.025778] x64_sys_call+0x16ba/0x2150
[ 205.026942] do_syscall_64+0x56/0x1e0
[ 205.028108] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 205.029276] RIP: 0033:0x7fbc36f10104
[ 205.030420] Code: 89 02 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 8d 05 e1 08 2e 00 8b 00 85 c0 75 13 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 f3 c3 66 90 41 54 55 49 89 d4 53 48 89 f5
This patch sets ccp_debugfs_dir to NULL after destroying it in
ccp5_debugfs_destroy, allowing the directory dentry to be
recreated when rebinding the ccp device.
Tested on AMD Ryzen 7 1700X.
Fixes: 3cdbe346ed3f ("crypto: ccp - Add debugfs entries for CCP information")
Signed-off-by: Mengbiao Xiong <xisme1998@gmail.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The intermediary value was included in the wrong
hash state. While there, adapt to user-space by
setting the timestamp to 0 if stuck and inserting
the values nevertheless.
Acked-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Markus Theil <theil.markus@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The `dma_unmap_sg()` functions should be called with the same nents as the
`dma_map_sg()`, not the value the map function returned.
Fixes: c957f8b3e2e5 ("crypto: inside-secure - avoid unmapping DMA memory that was not mapped")
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Reviewed-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The __snp_alloc_firmware_pages() helper allocates pages in the firmware
state (alloc + rmpupdate). In case of failed rmpupdate, it tries
reclaiming pages with already changed state. This requires calling
the PSP firmware and since there is sev_cmd_mutex to guard such calls,
the helper takes a "locked" parameter so specify if the lock needs to
be held.
Most calls happen from snp_alloc_firmware_page() which executes without
the lock. However
commit 24512afa4336 ("crypto: ccp: Handle the legacy TMR allocation when SNP is enabled")
switched sev_fw_alloc() from alloc_pages() (which does not call the PSP) to
__snp_alloc_firmware_pages() (which does) but did not account for the fact
that sev_fw_alloc() is called from __sev_platform_init_locked()
(via __sev_platform_init_handle_tmr()) and executes with the lock held.
Add a "locked" parameter to __snp_alloc_firmware_pages().
Make sev_fw_alloc() use the new parameter to prevent potential deadlock in
rmp_mark_pages_firmware() if rmpupdate() failed.
Fixes: 24512afa4336 ("crypto: ccp: Handle the legacy TMR allocation when SNP is enabled")
Signed-off-by: Alexey Kardashevskiy <aik@amd.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Pratik R. Sampat <prsampat@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
local_lock.h is the main header for the local_lock_t type and provides
wrappers around internal functions prefixed with __ in
local_lock_internal.h.
Move the this_cpu_ptr() dereference of the variable from the internal to
the main header. Since it is all macro implemented, this_cpu_ptr() will
still happen within the preempt/ IRQ disabled section.
This frees the internal implementation (__) to be used on local_lock_t
types which are local variables and must not be accessed via
this_cpu_ptr().
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Waiman Long <longman@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/all/20250630075138.3448715-2-bigeasy@linutronix.de
|
|
Add phmac selftest invocation to the crypto testmanager.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Acked-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add key preparation code in case of selftest running to the phmac
setkey function:
As long as crypto_ahash_tested() returns with false, all setkey()
invocations are assumed to carry sheer hmac clear key values and thus
need some preparation to work with the phmac implementation. Thus it
is possible to use the already available hmac test vectors implemented
in the testmanager to test the phmac code.
When crypto_ahash_tested() returns true (that is after larval state)
the phmac code assumes the key material is a blob digestible by the
pkey kernel module which converts the blob into a working key for the
phmac code.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add a little inline helper function
crypto_ahash_tested()
to the internal/hash.h header file to retrieve the tested
status (that is the CRYPTO_ALG_TESTED bit in the cra_flags).
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Suggested-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add support for protected key hmac ("phmac") for s390 arch.
With the latest machine generation there is now support for
protected key (that is a key wrapped by a master key stored
in firmware) hmac for sha2 (sha224, sha256, sha384 and sha512)
for the s390 specific CPACF instruction kmac.
This patch adds support via 4 new ahashes registered as
phmac(sha224), phmac(sha256), phmac(sha384) and phmac(sha512).
Co-developed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The CPACF KMAC instruction supports new subfunctions for
protected key hmac. Add defines for these 4 new subfuctions.
Signed-off-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
