summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-10-03power: supply: bq2515x: fix kerneldocKrzysztof Kozlowski
Fix kerneldoc W=1 warning: drivers/power/supply/bq2515x_charger.c:189: warning: Function parameter or member 'init_data' not described in 'bq2515x_device' Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-10-03power: supply: bq24257: skip 'struct acpi_device_id' when !CONFIG_ACPIKrzysztof Kozlowski
Since ACPI_PTR() is used to NULLify the value when !CONFIG_ACPI, the struct acpi_device_id becomes unused: drivers/power/supply/bq24257_charger.c:1155:36: warning: 'bq24257_acpi_match' defined but not used [-Wunused-const-variable=] Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-10-03Merge tag 'imx-soc-5.10' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/soc i.MX SoC update for 5.10: - A series from Fabio Estevam to remove legacy non-DT i.MX platforms support and related board files. This is a natural move, as the platforms had been converted to DT for years, and we have not seen any users around these legacy non-DT support for a while. - Enable cpufreq support for i.MX7ULP platform. * tag 'imx-soc-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (26 commits) clk: imx: imx35: Remove mx35_clocks_init() clk: imx: imx31: Remove mx31_clocks_init() clk: imx: imx27: Remove mx27_clocks_init() ARM: imx: Remove unused definitions ARM: imx35: Retrieve the IIM base address from devicetree ARM: imx3: Retrieve the AVIC base address from devicetree ARM: imx3: Retrieve the CCM base address from devicetree ARM: imx31: Retrieve the IIM base address from devicetree ARM: imx27: Retrieve the CCM base address from devicetree ARM: imx27: Retrieve the SYSCTRL base address from devicetree ARM: imx: Remove remnant board file support pieces ARM: imx: Remove imx device directory ARM: imx: Remove iomux-v3 board code ARM: imx3: Remove imx3 soc_init() ARM: imx31: Remove remaining i.MX31 board code ARM: imx27: Retrieve AVIC base address from devicetree ARM: imx27: Get rid of mm-imx27.c ARM: imx27: Remove iomux-v1 board code ARM: imx27: Remove imx27_soc_init() ARM: imx7ulp: enable cpufreq ... Link: https://lore.kernel.org/r/20200923073009.23678-2-shawnguo@kernel.org Signed-off-by: Olof Johansson <olof@lixom.net>
2020-10-03Merge tag 'hisi-arm-soc-for-5.10' of git://github.com/hisilicon/linux-hisi ↵Olof Johansson
into arm/soc Hisilicon ARM SoC updates for v5.10 - Add SD5203 SoC support which core is ARM926EJ-S - Add Low-level debugging support for SD5203 * tag 'hisi-arm-soc-for-5.10' of git://github.com/hisilicon/linux-hisi: ARM: debug: add UART early console support for SD5203 ARM: hisi: add support for SD5203 SoC Link: https://lore.kernel.org/r/5F742928.2060202@hisilicon.com Signed-off-by: Olof Johansson <olof@lixom.net>
2020-10-03Merge tag 'omap-for-v5.10/defconfig-signed' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/defconfig Defconfig changes for omaps for v5.10 merge window Enable twl4030_madc as a loadable module as the ADC is used on some devices by the battery charger. And enable more widely used networking options as loadable modules where possible. * tag 'omap-for-v5.10/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: omap2plus_defconfig: enable generic net options ARM: omap2plus_defconfig: enable twl4030_madc as a loadable module Link: https://lore.kernel.org/r/pull-1601445968-476435@atomide.com-3 Signed-off-by: Olof Johansson <olof@lixom.net>
2020-10-03Merge tag 'omap-for-v5.10/soc-part2-v2-signed' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/soc One more SoC change for omaps for v5.10 merge window Remove debugfs dependency for enabling off mode during idle for omap3 by enabling it automatically based on the PMIC configuration. * tag 'omap-for-v5.10/soc-part2-v2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: omap3: enable off mode automatically Link: https://lore.kernel.org/r/pull-1601445968-476435@atomide.com Signed-off-by: Olof Johansson <olof@lixom.net>
2020-10-03Merge tag 'davinci-for-v5.10/soc' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into arm/soc This pull request contains a patch that shifts to using new simplified i2c driver probe method inside mach-davinci (i2c_driver->probe_new()) * tag 'davinci-for-v5.10/soc' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci: ARM: davinci: use simple i2c probe function Link: https://lore.kernel.org/r/83eff002-5247-4fb6-33b4-ce7cec3d2d5c@ti.com Signed-off-by: Olof Johansson <olof@lixom.net>
2020-10-03coccinelle: misc: add flexible_array.cocci scriptDenis Efremov
One-element and zero-length arrays are deprecated [1]. Kernel code should always use "flexible array members" instead, except for existing uapi definitions. The script warns about one-element and zero-length arrays in structs. [1] commit 68e4cd17e218 ("docs: deprecated.rst: Add zero-length and one-element arrays") Cc: Kees Cook <keescook@chromium.org> Cc: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Denis Efremov <efremov@linux.com> Signed-off-by: Julia Lawall <julia.lawall@inria.fr>
2020-10-03Merge tag 'v5.9-next-soc' of ↵Olof Johansson
https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/drivers cmdq helper: - add new functionality for writing and reading values to and from addresses * tag 'v5.9-next-soc' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: drm/mediatek: reduce clear event soc: mediatek: cmdq: add clear option in cmdq_pkt_wfe api soc: mediatek: cmdq: add jump function soc: mediatek: cmdq: add write_s_mask value function soc: mediatek: cmdq: add write_s value function soc: mediatek: cmdq: add read_s function soc: mediatek: cmdq: add write_s_mask function soc: mediatek: cmdq: add write_s function soc: mediatek: cmdq: add address shift in jump soc: mediatek: mtk-infracfg: Fix kerneldoc Link: https://lore.kernel.org/r/ac672cc9-059c-b768-3a67-1f674d4a2b7a@gmail.com Signed-off-by: Olof Johansson <olof@lixom.net>
2020-10-03Merge tag 'memory-controller-drv-5.10-2' of ↵Olof Johansson
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl into arm/drivers Memory controller drivers for v5.10, part two 1. Add support for MT8167 to Mediatek SMI. 2. Compile test fix (omap-gpmc) and duplicate code (tegra). 3. Simplify code with DEFINE_SHOW_ATTRIBUTE. * tag 'memory-controller-drv-5.10-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl: memory: emif: Convert to DEFINE_SHOW_ATTRIBUTE memory: tegra: Convert to DEFINE_SHOW_ATTRIBUTE memory: omap-gpmc: Fix compile test on SPARC memory: mtk-smi: add support for MT8167 dt-bindings: memory: mediatek: Add binding for MT8167 SMI memory: tegra: Delete duplicated argument to '|' in function tegra210_emc_r21021_periodic_compensation Link: https://lore.kernel.org/r/20200925152523.14608-1-krzk@kernel.org Signed-off-by: Olof Johansson <olof@lixom.net>
2020-10-03Merge tag 'reset-for-v5.10' of git://git.pengutronix.de/pza/linux into ↵Olof Johansson
arm/drivers Reset controller updates for v5.10 This tag allows to build reset-imx7 as a module, and adds support to reset the Cortex-M4 processor on i.MX8MQ to it, adds support for the Versal platform to the reset-zynqmp driver, and fixes some kerneldoc comments in the core and in sti/reset-syscfg. * tag 'reset-for-v5.10' of git://git.pengutronix.de/pza/linux: reset: sti: reset-syscfg: fix struct description warnings reset: imx7: add the cm4 reset for i.MX8MQ dt-bindings: reset: imx8mq: add m4 reset reset: Fix and extend kerneldoc reset: reset-zynqmp: Added support for Versal platform dt-bindings: reset: Updated binding for Versal reset driver reset: imx7: Support module build Link: https://lore.kernel.org/r/2b77c90d2b970eb8fa09000b9ecb564bffa76374.camel@pengutronix.de Signed-off-by: Olof Johansson <olof@lixom.net>
2020-10-03Merge tag 'amlogic-drivers' of ↵Olof Johansson
https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/drivers soc: amlogic: driver updates for v5.10 - misc. pm-domain updates * tag 'amlogic-drivers' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: soc: amlogic: pm-domains: use always-on flag soc: amlogic: meson-ee-pwrc: add support for the Meson AXG SoCs dt-bindings: power: amlogic, meson-ee-pwrc: add Amlogic AXG power controller bindings Link: https://lore.kernel.org/r/7hblhukjzx.fsf@baylibre.com Signed-off-by: Olof Johansson <olof@lixom.net>
2020-10-03Merge tag 'qcom-drivers-for-5.10' of ↵Olof Johansson
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/drivers Qualcomm driver updates for v5.10 Replace the busy wait for free tcs slots in the RPMh driver with a sleeping wait and use memory barriers when writing the command registers. Add a bunch of SoC ids to the socinfo driver, fix an erro printin the apr driver and migrate llcc to devm_platform_ioremap_resource_byname(). * tag 'qcom-drivers-for-5.10' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: soc: qcom: llcc: use devm_platform_ioremap_resource_byname() soc: qcom: apr: Fixup the error displayed on lookup failure soc: qcom: socinfo: Add msm8992/4 and apq8094 SoC IDs soc: qcom: rpmh-rsc: Sleep waiting for tcs slots to be free soc: qcom-geni-se: Don't use relaxed writes when writing commands soc: qcom: socinfo: add SC7180 entry to soc_id array soc: qcom: socinfo: add soc id for IPQ6018 Link: https://lore.kernel.org/r/20200924040504.179708-1-bjorn.andersson@linaro.org Signed-off-by: Olof Johansson <olof@lixom.net>
2020-10-03Merge tag 'soc-fsl-next-v5.10' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux into arm/drivers NXP/FSL SoC driver updates for v5.10 Fix various compile warnings and static analysis warnings for: - QBMan driver - DPIO driver - QE driver * tag 'soc-fsl-next-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux: soc: fsl: qe: Remove unnessesary check in ucc_set_tdm_rxtx_clk soc: fsl: qman: convert to use be32_add_cpu() soc: fsl: dpio: remove set but not used 'addr_cena' soc: fsl: qbman: Fix return value on success soc: fsl: qman: fix -Wpacked-not-aligned warnings Link: https://lore.kernel.org/r/20200923224416.25788-1-leoyang.li@nxp.com Signed-off-by: Olof Johansson <olof@lixom.net>
2020-10-03Merge tag 'imx-drivers-5.10' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/drivers i.MX drivers update for 5.10: - Use dev_err_probe() to simplify error handling for i.MX GPCv2 driver. - Add a check in i.MX SCU power domain driver to ignore the power domains that are not owned by the current partition. * tag 'imx-drivers-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: firmware: imx: scu-pd: ignore power domain not owned soc: imx: gpcv2: Use dev_err_probe() to simplify error handling Link: https://lore.kernel.org/r/20200923073009.23678-1-shawnguo@kernel.org Signed-off-by: Olof Johansson <olof@lixom.net>
2020-10-03Merge tag 'sunxi-drivers-for-5.10-1' of ↵Olof Johansson
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/drivers One small style fix for the Allwinner SRAM driver * tag 'sunxi-drivers-for-5.10-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: soc: sunxi: sram: remove unneeded semicolon Link: https://lore.kernel.org/r/175d36ad-bc98-4d5d-b035-ce467e932248.lettre@localhost Signed-off-by: Olof Johansson <olof@lixom.net>
2020-10-03ARM: dts: nspire: Fix SP804 usersAndre Przywara
Even though the SP804 binding allows to specify only one clock, the primecell driver requires a named clock to activate the bus clock. Specify the one clock three times and provide some clock-names, to make the DT match the SP804 and primecell binding. Link: https://lore.kernel.org/r/20200907121831.242281-3-andre.przywara@arm.com Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2020-10-03arm64: dts: lg: Fix SP804 usersAndre Przywara
Even though the SP804 binding allows to specify only one clock, the primecell driver requires a named clock to activate the bus clock. Specify the one clock three times and provide some clock-names, to make the DT match the SP804 and primecell binding. Also add the missing arm,primecell compatible string. Link: https://lore.kernel.org/r/20200907121831.242281-4-andre.przywara@arm.com Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2020-10-03arm64: dts: lg: Fix SP805 clocksAndre Przywara
The SP805 DT binding requires two clocks to be specified, but the two LG platform DTs currently only specify one clock. In practice, Linux would pick a clock named "apb_pclk" for the bus clock, and the Linux (and U-Boot) SP805 driver would use the first clock to derive the actual watchdog counter frequency. Since currently both are the very same clock, we can just double the clock reference, and add the correct clock-names, to match the binding. Link: https://lore.kernel.org/r/20200907121831.242281-6-andre.przywara@arm.com Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Chanho Min <chanho.min@lge.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2020-10-03ARM: mstar: Fix up the fallout from moving the dts/dtsi filesDaniel Palmer
Since the dtsi/dts files have been moved some includes are now broken so this fixes up the includes so the dtbs build again. Link: https://lore.kernel.org/r/20201002133418.2250277-6-daniel@0x0f.com Signed-off-by: Daniel Palmer <daniel@0x0f.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2020-10-03ARM: mstar: Add mstar prefix to all of the dtsi/dts filesDaniel Palmer
Based on Arnd's comment[0] all of the MStar dtsi/dts files should have had a prefix. This moves the files, fixes the Makefile that generates dtbs and fixes up the MAINTAINERS entry. Fixing up some includes in the files themselves is left for a later commit as rolling it into this commit resulted in a confusing diff. 0 - https://lore.kernel.org/linux-arm-kernel/CAK8P3a0maQhfaerwG4KgFZOrUPwueKOp2+MOeG9C=+8ZNzc2Kg@mail.gmail.com/ Link: https://lore.kernel.org/r/20201002133418.2250277-5-daniel@0x0f.com Signed-off-by: Daniel Palmer <daniel@0x0f.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2020-10-03ARM: mstar: Add interrupt to pm_uartDaniel Palmer
Since we now have support for the interrupt controller pm_uart's interrupt is routed through it make sense to wire up it's interrupt in the device tree. The interrupt is the same for all known chips so it goes in the base dtsi. Link: https://lore.kernel.org/r/20201002133418.2250277-4-daniel@0x0f.com Signed-off-by: Daniel Palmer <daniel@0x0f.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2020-10-03ARM: mstar: Add interrupt controller to base dtsiDaniel Palmer
Add the IRQ and FIQ intc instances to the base MStar/SigmaStar v7 dtsi. All of the known SoCs have both and at the same place with their common IPs using the same interrupt lines. Link: https://lore.kernel.org/r/20201002133418.2250277-3-daniel@0x0f.com Signed-off-by: Daniel Palmer <daniel@0x0f.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2020-10-03ARM: mstar: Select MStar intcDaniel Palmer
MediaTek recently introduced support for the MStar interrupt controller that is also present in some of their chips as well as the MStar/Sigmastar chips. Almost all of the peripheral interrupts go through an instance of this controller in MStar/SigmaStar Arm v7 chips so we want to select it if CONFIG_ARCH_MSTARV7 is selected. Link: https://lore.kernel.org/r/20201002133418.2250277-2-daniel@0x0f.com Signed-off-by: Daniel Palmer <daniel@0x0f.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2020-10-03Merge tag 'omap-for-v5.9/fixes-rc7' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes Two regression fixes for omaps Fix AM33XX_IOPAD macro that broke after recent pinctrl changes to use #pinctrl-cells = 2. And fix omap_enter_idle_coupled() for cases where cpu_cluster_pm_enter() returns an error as otherwise we may end up wrongly idling the MPU domain on the next WFI. * tag 'omap-for-v5.9/fixes-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2+: Restore MPU power domain if cpu_cluster_pm_enter() fails ARM: dts: am33xx: modify AM33XX_IOPAD for #pinctrl-cells = 2 Link: https://lore.kernel.org/r/pull-1601544624-617679@atomide.com Signed-off-by: Olof Johansson <olof@lixom.net>
2020-10-03Merge tag 'hisi-arm32-dt-for-5.10-tag2' of ↵Olof Johansson
git://github.com/hisilicon/linux-hisi into arm/dt ARM: DT: Hisilicon ARM32 SoCs DT updates for 5.10 (take two) - Fix the system controller compatible for the hi3620 and hip04 SoCs - Add the basic device tree for the hisilicon SD5203 SoC * tag 'hisi-arm32-dt-for-5.10-tag2' of git://github.com/hisilicon/linux-hisi: ARM: dts: hisilicon: add SD5203 dts ARM: dts: hisilicon: fix the system controller compatible nodes Link: https://lore.kernel.org/r/5F742717.5080405@hisilicon.com Signed-off-by: Olof Johansson <olof@lixom.net>
2020-10-03Merge tag 'omap-for-v5.10/dt-part2-signed' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt More dts changes for omaps for v5.10 merge window Some more dts changes that did not make it to the first set of dts changes: - Drop unnessary nokia,nvm-size property - A series of changes to use "okay" instead of "ok" - A series of changes to move boards to use new cpsw switch driver and drop the drop legacy cpsw dt node - A series of changes to fix issues with the GPIO binding usage * tag 'omap-for-v5.10/dt-part2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: am3874: iceboard: fix GPIO expander reset GPIOs ARM: dts: am335x: t335: align GPIO hog names with dtschema ARM: dts: am335x: lxm: fix PCA9539 GPIO expander properties ARM: dts: am437x-l4: drop legacy cpsw dt node ARM: dts: am437x: switch to new cpsw switch drv ARM: dts: am437x-l4: add dt node for new cpsw switchdev driver ARM: dts: dra7: drop legacy cpsw dt node ARM: dts: am57xx-cl-som-am57x: switch to new cpsw switch drv ARM: dts: dra7x-evm: switch to new cpsw switch drv ARM: dts: beagle-x15: switch to new cpsw switch drv ARM: dts: am57xx-idk: switch to new cpsw switch drv ARM: dts: am5729: beagleboneai: switch to new cpsw switch drv ARM: dts: am43xx: replace status value "ok" by "okay" ARM: dts: dra7xx: replace status value "ok" by "okay" ARM: dts: omap: replace status value "ok" by "okay" ARM: dts: n9, n950: Remove nokia,nvm-size property Link: https://lore.kernel.org/r/pull-1601445968-476435@atomide.com-2 Signed-off-by: Olof Johansson <olof@lixom.net>
2020-10-03Merge tag 'zynqmp-dt-for-v5.10' of https://github.com/Xilinx/linux-xlnx into ↵Olof Johansson
arm/dt arm64: soc: ZynqMP DT changes for v5.10 - Fix IRQ flag for PMIC - Align gpio hogs and leds with naming convention - Rename busses to match DT schema - Tune i2c cadence compatible string - Remove undocumented u-boot properties * tag 'zynqmp-dt-for-v5.10' of https://github.com/Xilinx/linux-xlnx: arm64: dts: zynqmp: Fix leds subnode name for zcu100/ultra96 v1 arm64: dts: zynqmp: Remove undocumented u-boot properties arm64: dts: zynqmp: Remove additional compatible string for i2c IPs arm64: dts: zynqmp: Rename buses to be align with simple-bus yaml arm64: dts: xilinx: align GPIO hog names with dtschema arm64: dts: zynqmp-zcu100-revC: correct interrupt flags arm64: dts: xilinx: Align IOMMU nodename with dtschema arm64: dts: zynqmp: Add GTR transceivers Link: https://lore.kernel.org/r/37a0333b-541e-649c-68c5-aa4b52e6b91d@monstr.eu Signed-off-by: Olof Johansson <olof@lixom.net>
2020-10-03Merge tag 'sunxi-dt-for-5.10-2' of ↵Olof Johansson
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt A few more DT patches for 5.10, to support simple-framebuffer on the v3s and the pinecube board * tag 'sunxi-dt-for-5.10-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: ARM: dts: sun8i: v3s: Add simple-framebuffer ARM: dts: sun8i: s3l: add support for Pine64 PineCube IP camera dt-bindings: arm: sunxi: add Pine64 PineCube binding ARM: dts: sun8i: V3/V3s/S3/S3L: add pinctrl for I2C1 at PE bank ARM: dts: sun8i: V3/V3s/S3/S3L: add pinctrl for 8-bit parallel CSI ARM: dts: sun8i: V3/V3s/S3/S3L: add CSI1 device node ARM: dts: sun8i: V3/V3s/S3/S3L: add pinctrl for UART2 RX/TX ARM: dts: sun8i: V3/V3s/S3/S3L: add Ethernet support Link: https://lore.kernel.org/r/e7c12b59-8603-438d-908b-5f0bde2c8697.lettre@localhost Signed-off-by: Olof Johansson <olof@lixom.net>
2020-10-03ARM: multi_v7_defconfig: add FMC2 EBI controller supportChristophe Kerello
This patch adds FMC2 EBI controller support used by STM32MP SOCs. Link: https://lore.kernel.org/r/20200924101342.4707-1-alexandre.torgue@st.com Signed-off-by: Christophe Kerello <christophe.kerello@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2020-10-03ARM: stm32: Replace HTTP links with HTTPS onesAlexander A. Klimov
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Link: https://lore.kernel.org/r/20200924101113.4528-1-alexandre.torgue@st.com Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2020-10-03Merge tag 'v5.10-rockchip-dts32-1' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt cpu-supply fixes (supply for each cpu core not only cpu0) and a spelling for the status property. * tag 'v5.10-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: dts: rockchip: replace status value "ok" by "okay" ARM: dts: rockchip: update cpu supplies on rk3066a ARM: dts: rockchip: rk3066a: add label to cpu@1 ARM: dts: rockchip: update cpu supplies on rk3288 Link: https://lore.kernel.org/r/1834049.gShM3QRH0n@diego Signed-off-by: Olof Johansson <olof@lixom.net>
2020-10-03Merge tag 'actions-arm64-dt-for-v5.10' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/mani/linux-actions into arm/dt Actions Semi ARM64 DT for v5.10: - Fix the memory region used by pinctrl and sps drivers on the S700 SoC. The issue is fixed by limiting the address space used by pinctrl driver. In hardware these two are separate subsystems but the hw engineers somehow merged the registers space into one. So we now limit the address space with appropriate offsets for the two drivers. - Add DMA controller support for S700 SoC. The relevant driver changes are picked up by DMA Engine mainatainer. The DMA on this SoC can be used for mem-to-mem and mem-to-peripheral transfers. * tag 'actions-arm64-dt-for-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mani/linux-actions: arm64: dts: actions: Add DMA Controller for S700 arm64: dts: actions: limit address range for pinctrl node Link: https://lore.kernel.org/r/20200922114030.GC11251@Mani-XPS-13-9360 Signed-off-by: Olof Johansson <olof@lixom.net>
2020-10-03Merge tag 'actions-arm-dt-for-v5.10' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/mani/linux-actions into arm/dt Actions Semi ARM DT for v5.10: - Add devicetree support for Caninos Loucos Labrador SBC manufactured by Laboratory of Integrated Technological Systems (LSI-TEC), Brazil. This board is based on Actions Semi S500 SoC. More information about this board can be found in their website: https://caninosloucos.org/en/ - Fix PPI interrupt specifiers for peripherals attached to Cortex-A9 CPU - Add devicetree support for RoseapplePi SBC manufactured by Roseapple Pi team in Taiwan. This board is based on Actions Semi S500 SoC. More information about this board can be found in their website: http://roseapplepi.org/ * tag 'actions-arm-dt-for-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mani/linux-actions: ARM: dts: owl-s500: Add RoseapplePi ARM: dts: owl-s500: Fix incorrect PPI interrupt specifiers ARM: dts: Add Caninos Loucos Labrador v2 Link: https://lore.kernel.org/r/20200922113712.GB11251@Mani-XPS-13-9360 Signed-off-by: Olof Johansson <olof@lixom.net>
2020-10-03Merge tag 'actions-bindings-for-v5.10' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/mani/linux-actions into arm/dt Actions Semi bindings for v5.10 - Add vendor prefix for Roseapple Pi: http://roseapplepi.org/ - Document RoseapplePi SBC manufactured by Roseapple Pi team in Taiwan. This board is based on Actions Semi S500 SoC. More information about this board can be found in their website: http://roseapplepi.org/index.php/spec/ - Add vendor prefix for Caninos Loucos Program: https://caninosloucos.org/en/program-en/ - Document Caninos Loucos Labrador SBC manufactured by Laboratory of Integrated Technological Systems (LSI-TEC), Brazil. This board is based on Actions Semi S500 SoC. More information about this board can be found in their website: https://caninosloucos.org/en/labrador-32-en/ * tag 'actions-bindings-for-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mani/linux-actions: dt-bindings: arm: actions: Document RoseapplePi dt-bindings: Add vendor prefix for RoseapplePi.org dt-bindings: arm: actions: Document Caninos Loucos Labrador dt-bindings: Add vendor prefix for Caninos Loucos Link: https://lore.kernel.org/r/20200922113408.GA11251@Mani-XPS-13-9360 Signed-off-by: Olof Johansson <olof@lixom.net>
2020-10-03Merge tag 'sunxi-dt-for-5.10-1' of ↵Olof Johansson
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt Our usual bunch of patches to support the Allwinner SoCs, this time adding: - Allwinner A100 initial support - Mali, DMA, cedrus and IR Support for the R40 - Crypto support for the v3s - New board: Allwinner A100 Perf1 * tag 'sunxi-dt-for-5.10-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (24 commits) ARM: dts: sun8i: v3s: Enable crypto engine dt-bindings: crypto: Add compatible for V3s dt-bindings: crypto: Specify that allwinner, sun8i-a33-crypto needs reset arm64: dts: allwinner: a64: Update the audio codec compatible arm64: dts: allwinner: a64: Update codec widget names ARM: dts: sun8i: a33: Update codec widget names ARM: dts: sun8i: r40: Add video engine node ARM: dts: sun8i: r40: Add node for system controller dt-bindings: sram: allwinner, sun4i-a10-system-control: Add R40 compatibles ARM: dts: sun8i: r40: bananapi-m2-ultra: Enable IR ARM: dts: sun8i: r40: Add IR nodes dt-bindings: media: allwinner, sun4i-a10-ir: Add R40 compatible ARM: dts: sun8i: r40: Add DMA node dt-bindings: dma: allwinner,sun50i-a64-dma: Add R40 compatible arm64: allwinner: A100: add support for Allwinner Perf1 board dt-bindings: arm: sunxi: Add Allwinner A100 Perf1 Board bindings arm64: allwinner: A100: add the basical Allwinner A100 DTSI file dt-bindings: irq: sun7i-nmi: Add binding for A100's NMI controller dt-bindings: irq: sun7i-nmi: fix dt-binding for a80 nmi ARM: dts: sun4i: Enable HDMI support on the Mele A1000 ... Link: https://lore.kernel.org/r/ac39ee89-ea3a-4971-8cd7-8c4b2ecef39d.lettre@localhost Signed-off-by: Olof Johansson <olof@lixom.net>
2020-10-03Merge tag 'amlogic-dt-2' of ↵Olof Johansson
https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt ARM: dts: amlogic updates for v5.10 (round 2) - GPU: remove invalid interrupt lines * tag 'amlogic-dt-2' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: ARM: dts: meson8: remove two invalid interrupt lines from the GPU node Link: https://lore.kernel.org/r/20200917165040.22908-2-krzk@kernel.org Link: https://lore.kernel.org/r/20200917165040.22908-1-krzk@kernel.org Link: https://lore.kernel.org/r/7hsgawl9h2.fsf@baylibre.com Signed-off-by: Olof Johansson <olof@lixom.net>
2020-10-03Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull kvm fixes from Paolo Bonzini: "Two bugfixes" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: VMX: update PFEC_MASK/PFEC_MATCH together with PF intercept KVM: arm64: Restore missing ISB on nVHE __tlb_switch_to_guest
2020-10-03Merge tag 'ti-k3-dt-for-v5.10-part2' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/nmenon/linux into arm/dt Second and final device tree updates towards 5.10-rc1 for TI K3 platform. * tag 'ti-k3-dt-for-v5.10-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/nmenon/linux: (23 commits) arm64: dts: ti: k3-j7200-common-proc-board: Add USB support arm64: dts: ti: k3-j7200-common-proc-board: Configure the SERDES lane function arm64: dts: ti: k3-j7200-main: Add USB controller arm64: dts: ti: k3-j7200-main.dtsi: Add USB to SERDES lane MUX arm64: dts: ti: k3-j7200-main: Add SERDES lane control mux dt-bindings: ti-serdes-mux: Add defines for J7200 SoC arm64: dts: ti: k3-j721e-common-proc-board: align GPIO hog names with dtschema arm64: dts: ti: k3-j7200-common-proc-board: Add support for eMMC and SD card arm64: dts: ti: k3-j7200-main: Add support for MMC/SD controller nodes arm64: dts: ti: k3-j7200-som-p0: Add HyperFlash node arm64: dts: ti: k3-j7200-mcu-wakeup: Add HyperBus node arm64: dts: ti: k3-j7200-common-proc-board: Add I2C IO expanders arm64: dts: ti: k3-j7200: Add I2C nodes arm64: dts: ti: k3-j7200-common-proc-board: add mcu cpsw nuss pinmux and phy defs arm64: dts: ti: k3-j7200-mcu: add mcu cpsw nuss node arm64: dts: ti: k3-j7200-main: add main navss cpts node arm64: dts: ti: k3-j7200: add DMA support arm64: dts: ti: Add support for J7200 Common Processor Board arm64: dts: ti: Add support for J7200 SoC dt-bindings: arm: ti: Add bindings for J7200 SoC ... Link: https://lore.kernel.org/r/20201002134559.orvmgbns57qlyn3i@akan Signed-off-by: Olof Johansson <olof@lixom.net>
2020-10-03Merge tag 'renesas-fixes-for-v5.9-tag1' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/fixes Renesas fixes for v5.9 - Fix touch controller probe failure on the iWave RainboW G20D Qseven board. * tag 'renesas-fixes-for-v5.9-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: ARM: dts: iwg20d-q7-common: Fix touch controller probe failure Link: https://lore.kernel.org/r/20200928115645.10985-1-geert+renesas@glider.be Signed-off-by: Olof Johansson <olof@lixom.net>
2020-10-03Merge tag 'zynqmp-soc-for-v5.9-v2' of https://github.com/Xilinx/linux-xlnx ↵Olof Johansson
into arm/fixes arm64: soc: ZynqMP SoC changes for v5.9-v2 - Fix error code in zynqmp_power driver * tag 'zynqmp-soc-for-v5.9-v2' of https://github.com/Xilinx/linux-xlnx: soc: xilinx: Fix error code in zynqmp_pm_probe() Link: https://lore.kernel.org/r/9b23dd60-45f4-cd7d-e81a-e8ab8e20af7c@xilinx.com Signed-off-by: Olof Johansson <olof@lixom.net>
2020-10-03Merge tag 'for-linus-5.9b-rc8-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fix from Juergen Gross: "Fix a regression introduced in 5.9-rc3 which caused a system running as fully virtualized guest under Xen to crash when using legacy devices like a floppy" * tag 'for-linus-5.9b-rc8-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/events: don't use chip_data for legacy IRQs
2020-10-03Merge tag 'usb-5.9-rc8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB/PHY fixes from Greg KH: "Here are some small USB and PHY driver fixes for 5.9-rc8 The PHY driver fix resolves an issue found by Dan Carpenter for a memory leak. The USB fixes fall into two groups: - usb gadget fix from Bryan that is a fix for a previous security fix that showed up in in-the-wild testing - usb core driver matching bugfixes. This fixes a bug that has plagued the both the usbip driver and syzbot testing tools this -rc release cycle. All is now working properly so usbip connections will work, and syzbot can get back to fuzzing USB drivers properly. All have been in linux-next for a while with no reported issues" * tag 'usb-5.9-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usbcore/driver: Accommodate usbip usbcore/driver: Fix incorrect downcast usbcore/driver: Fix specific driver selection Revert "usbip: Implement a match function to fix usbip" USB: gadget: f_ncm: Fix NDP16 datagram validation phy: ti: am654: Fix a leak in serdes_am654_probe()
2020-10-03Merge branch 'i2c/for-current' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "Some more driver fixes for i2c" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: npcm7xx: Clear LAST bit after a failed transaction. i2c: cpm: Fix i2c_ram structure i2c: i801: Exclude device from suspend direct complete optimization
2020-10-03Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: "A couple more driver quirks, now enabling newer trackpoints from Synaptics for real" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: i8042 - add nopnp quirk for Acer Aspire 5 A515 Input: trackpoint - enable Synaptics trackpoints
2020-10-03scripts/spelling.txt: fix malformed entryEric Biggers
One of the entries has three fields "mistake||correction||correction" rather than the expected two fields "mistake||correction". Fix it. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Link: https://lkml.kernel.org/r/20200930234359.255295-1-ebiggers@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-03mm/page_alloc: handle a missing case for memalloc_nocma_{save/restore} APIsJoonsoo Kim
memalloc_nocma_{save/restore} APIs can be used to skip page allocation on CMA area, but, there is a missing case and the page on CMA area could be allocated even if APIs are used. This patch handles this case to fix the potential issue. For now, these APIs are used to prevent long-term pinning on the CMA page. When the long-term pinning is requested on the CMA page, it is migrated to the non-CMA page before pinning. This non-CMA page is allocated by using memalloc_nocma_{save/restore} APIs. If APIs doesn't work as intended, the CMA page is allocated and it is pinned for a long time. This long-term pin for the CMA page causes cma_alloc() failure and it could result in wrong behaviour on the device driver who uses the cma_alloc(). Missing case is an allocation from the pcplist. MIGRATE_MOVABLE pcplist could have the pages on CMA area so we need to skip it if ALLOC_CMA isn't specified. Fixes: 8510e69c8efe (mm/page_alloc: fix memalloc_nocma_{save/restore} APIs) Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.ibm.com> Cc: Mel Gorman <mgorman@techsingularity.net> Link: https://lkml.kernel.org/r/1601429472-12599-1-git-send-email-iamjoonsoo.kim@lge.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-03mm, slub: restore initial kmem_cache flagsEric Farman
The routine that applies debug flags to the kmem_cache slabs inadvertantly prevents non-debug flags from being applied to those same objects. That is, if slub_debug=<flag>,<slab> is specified, non-debugged slabs will end up having flags of zero, and the slabs may be unusable. Fix this by including the input flags for non-matching slabs with the contents of slub_debug, so that the caches are created as expected alongside any debugging options that may be requested. With this, we can remove the check for a NULL slub_debug_string, since it's covered by the loop itself. Fixes: e17f1dfba37b ("mm, slub: extend slub_debug syntax for multiple blocks") Signed-off-by: Eric Farman <farman@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Kees Cook <keescook@chromium.org> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Link: https://lkml.kernel.org/r/20200930161931.28575-1-farman@linux.ibm.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-03power: supply: max17040: Support soc alertIskren Chernev
max17048 and max17049 support SOC alerts (interrupts when battery capacity changes by +/- 1%). At the moment the driver polls for changes every second. Using the alerts removes the need for polling. Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com> Tested-by: Jonathan Bakker <xc-racer2@live.ca> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-10-03power: supply: max17040: Support setting rcompIskren Chernev
The Maxim ModelGauge family supports fine-tuning by setting a compensation value (named rcomp in the docs). The value is affected by battery chemistry and ambient temperature. Add support for reading maxim,rcomp from DT and configuring the device with the supplied value. Temperature adjustment is not implemented at the moment, because there is no provision for receiving the ambient temperature at the moment. Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com> Tested-by: Jonathan Bakker <xc-racer2@live.ca> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
generated by cgit (git 2.34.1) at 2025-10-01 17:19:14 +0000