| Age | Commit message (Collapse) | Author |
|---|
|
The SLAB_MEM_SPREAD flag used to be implemented in SLAB, which was
removed as of v6.8-rc1, so it became a dead flag since the commit
16a1d968358a ("mm/slab: remove mm/slab.c and slab_def.h"). And the
series[1] went on to mark it obsolete to avoid confusion for users.
Here we can just remove all its users, which has no functional change.
[1] https://lore.kernel.org/all/20240223-slab-cleanup-flags-v2-1-02f1753e8303@suse.cz/
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Link: https://lore.kernel.org/r/20240224134822.829456-1-chengming.zhou@linux.dev
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Currently we ignore s_clusters_per_group field in the on-disk superblock
if bigalloc feature is not enabled. However e2fsprogs don't even open
the filesystem if s_clusters_per_group is invalid. This results in an
odd state where kernel happily works with the filesystem while even
e2fsck refuses to touch it. Verify that s_clusters_per_group is valid
even if bigalloc feature is not enabled to make things consistent. Due
to current e2fsprogs behavior it is unlikely there are filesystems out
in the wild (except for intentionally fuzzed ones) with invalid
s_clusters_per_group counts.
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://lore.kernel.org/r/20240219171033.22882-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
We observed a corruption during on-line resize of a file system that is
larger than 16 TiB with 4k block size. With having more then 2^32 blocks
resize_inode is turned off by default by mke2fs. The issue can be
reproduced on a smaller file system for convenience by explicitly
turning off resize_inode. An on-line resize across an 8 GiB boundary (the
size of a meta block group in this setup) then leads to a corruption:
dev=/dev/<some_dev> # should be >= 16 GiB
mkdir -p /corruption
/sbin/mke2fs -t ext4 -b 4096 -O ^resize_inode $dev $((2 * 2**21 - 2**15))
mount -t ext4 $dev /corruption
dd if=/dev/zero bs=4096 of=/corruption/test count=$((2*2**21 - 4*2**15))
sha1sum /corruption/test
# 79d2658b39dcfd77274e435b0934028adafaab11 /corruption/test
/sbin/resize2fs $dev $((2*2**21))
# drop page cache to force reload the block from disk
echo 1 > /proc/sys/vm/drop_caches
sha1sum /corruption/test
# 3c2abc63cbf1a94c9e6977e0fbd72cd832c4d5c3 /corruption/test
2^21 = 2^15*2^6 equals 8 GiB whereof 2^15 is the number of blocks per
block group and 2^6 are the number of block groups that make a meta
block group.
The last checksum might be different depending on how the file is laid
out across the physical blocks. The actual corruption occurs at physical
block 63*2^15 = 2064384 which would be the location of the backup of the
meta block group's block descriptor. During the on-line resize the file
system will be converted to meta_bg starting at s_first_meta_bg which is
2 in the example - meaning all block groups after 16 GiB. However, in
ext4_flex_group_add we might add block groups that are not part of the
first meta block group yet. In the reproducer we achieved this by
substracting the size of a whole block group from the point where the
meta block group would start. This must be considered when updating the
backup block group descriptors to follow the non-meta_bg layout. The fix
is to add a test whether the group to add is already part of the meta
block group or not.
Fixes: 01f795f9e0d67 ("ext4: add online resizing support for meta_bg and 64-bit file systems")
Cc: <stable@vger.kernel.org>
Signed-off-by: Maximilian Heyne <mheyne@amazon.de>
Tested-by: Srivathsa Dara <srivathsa.d.dara@oracle.com>
Reviewed-by: Srivathsa Dara <srivathsa.d.dara@oracle.com>
Link: https://lore.kernel.org/r/20240215155009.94493-1-mheyne@amazon.de
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
When ext4 is mounted without journal, with discard mount option, and on
a device not supporting trim, we print error for each and every freed
extent. This is not only useless but actively harmful. Instead ignore
the EOPNOTSUPP error. Trim is only advisory anyway and when the
filesystem has journal we silently ignore trim error as well.
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://lore.kernel.org/r/20240213101601.17463-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
ext4_xattr_block_set() drops ea_inode reference in two places. Handling
it just under the 'cleanup' label is enough so drop the second
occurence.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20240209112107.10585-3-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Cross-merge networking fixes after downstream PR.
No conflicts.
Adjacent changes:
net/core/page_pool_user.c
0b11b1c5c320 ("netdev: let netlink core handle -EMSGSIZE errors")
429679dcf7d9 ("page_pool: fix netlink dump stop/resume")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently defconfig selects NR_CPUS=256, but some vendors (e.g. Ampere
Computing) are planning to ship systems with 512 CPUs. So that all CPUs on
these systems can be used with defconfig, we'd like to bump NR_CPUS to 512.
Therefore this patch increases the default NR_CPUS from 256 to 512.
As increasing NR_CPUS will increase the size of cpumasks, there's a fear that
this might have a significant impact on stack usage due to code which places
cpumasks on the stack. To mitigate that concern, we can select
CPUMASK_OFFSTACK. As that doesn't seem to be a problem today with
NR_CPUS=256, we only select this when NR_CPUS > 256.
CPUMASK_OFFSTACK configures the cpumasks in the kernel to be
dynamically allocated. This was used in the X86 architecture in the
past to enable support for larger CPU configurations up to 8k cpus.
With that is becomes possible to dynamically size the allocation of
the cpu bitmaps depending on the quantity of processors detected on
bootup. Memory used for cpumasks will increase if the kernel is
run on a machine with more cores.
Further increases may be needed if ARM processor vendors start
supporting more processors. Given the current inflationary trends
in core counts from multiple processor manufacturers this may occur.
There are minor regressions for hackbench. The kernel data size
for 512 cpus is smaller with offstack than with onstack.
Benchmark results using hackbench average over 10 runs of
hackbench -s 512 -l 2000 -g 15 -f 25 -P
on Altra 80 Core
Support for 256 CPUs on stack. Baseline
7.8564 sec
Support for 512 CUs on stack.
7.8713 sec + 0.18%
512 CPUS offstack
7.8916 sec + 0.44%
Kernel size comparison:
text data filename Difference to onstack256 baseline
25755648 9589248 vmlinuz-6.8.0-rc4-onstack256
25755648 9607680 vmlinuz-6.8.0-rc4-onstack512 +0.19%
25755648 9603584 vmlinuz-6.8.0-rc4-offstack512 +0.14%
Tested-by: Eric Mackay <eric.mackay@oracle.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Christoph Lameter (Ampere) <cl@linux.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/37099a57-b655-3b3a-56d0-5f7fbd49d7db@gentwo.org
[catalin.marinas@arm.com: use 'select' instead of duplicating 'config CPUMASK_OFFSTACK']
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Convert the MediaTek SoC timer txt binding to json-schema.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220929122901.614315-3-angelogioacchino.delregno@collabora.com
[robh: Add mt8365 compatible, drop duplicate mediatek,mt6795-systimer, drop quotes]
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
The vendor has introduced two new revisions with slightly different
memory maps; update the driver to support them.
Fixes: dd24e202ac72 ("Input: iqs7222 - add support for Azoteq IQS7222D")
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Link: https://lore.kernel.org/r/ZelTRYX3fenMQuhF@nixie71
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
With multiple poll entries __io_queue_proc() might be running in
parallel with poll handlers and possibly task_work, we should not be
carelessly modifying req->flags there. io_poll_double_prepare() handles
a similar case with locking but it's much easier to move it into
__io_arm_poll_handler().
Cc: stable@vger.kernel.org
Fixes: 595e52284d24a ("io_uring/poll: don't enable lazy wake for POLLEXCLUSIVE")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/455cc49e38cf32026fa1b49670be8c162c2cb583.1709834755.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fix from Will Deacon:
"A lonely arm64 fix addressing a kprobes regression that we introduced
during the merge window:
- Fix recursive kprobes regression when probing the stack unwinder"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: prohibit probing on arch_kunwind_consume_entry()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs fixes from Gao Xiang:
"The main one is a KMSAN fix which addresses an issue introduced in
this cycle so it'd be much better to fix before releasing, and the
remaining one fixes VMA alignment for THP.
Summary:
- Fix a KMSAN uninit-value issue triggered by a crafted image
- Fix VMA alignment for memory mapped files on THP"
* tag 'erofs-for-6.8-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: apply proper VMA alignment for memory mapped files on THP
erofs: fix uninitialized page cache reported by KMSAN
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bpf, ipsec and netfilter.
No solution yet for the stmmac issue mentioned in the last PR, but it
proved to be a lockdep false positive, not a blocker.
Current release - regressions:
- dpll: move all dpll<>netdev helpers to dpll code, fix build
regression with old compilers
Current release - new code bugs:
- page_pool: fix netlink dump stop/resume
Previous releases - regressions:
- bpf: fix verifier to check bpf_func_state->callback_depth when
pruning states as otherwise unsafe programs could get accepted
- ipv6: avoid possible UAF in ip6_route_mpath_notify()
- ice: reconfig host after changing MSI-X on VF
- mlx5:
- e-switch, change flow rule destination checking
- add a memory barrier to prevent a possible null-ptr-deref
- switch to using _bh variant of of spinlock where needed
Previous releases - always broken:
- netfilter: nf_conntrack_h323: add protection for bmp length out of
range
- bpf: fix to zero-initialise xdp_rxq_info struct before running XDP
program in CPU map which led to random xdp_md fields
- xfrm: fix UDP encapsulation in TX packet offload
- netrom: fix data-races around sysctls
- ice:
- fix potential NULL pointer dereference in ice_bridge_setlink()
- fix uninitialized dplls mutex usage
- igc: avoid returning frame twice in XDP_REDIRECT
- i40e: disable NAPI right after disabling irqs when handling
xsk_pool
- geneve: make sure to pull inner header in geneve_rx()
- sparx5: fix use after free inside sparx5_del_mact_entry
- dsa: microchip: fix register write order in ksz8_ind_write8()
Misc:
- selftests: mptcp: fixes for diag.sh"
* tag 'net-6.8-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (63 commits)
net: pds_core: Fix possible double free in error handling path
netrom: Fix data-races around sysctl_net_busy_read
netrom: Fix a data-race around sysctl_netrom_link_fails_count
netrom: Fix a data-race around sysctl_netrom_routing_control
netrom: Fix a data-race around sysctl_netrom_transport_no_activity_timeout
netrom: Fix a data-race around sysctl_netrom_transport_requested_window_size
netrom: Fix a data-race around sysctl_netrom_transport_busy_delay
netrom: Fix a data-race around sysctl_netrom_transport_acknowledge_delay
netrom: Fix a data-race around sysctl_netrom_transport_maximum_tries
netrom: Fix a data-race around sysctl_netrom_transport_timeout
netrom: Fix data-races around sysctl_netrom_network_ttl_initialiser
netrom: Fix a data-race around sysctl_netrom_obsolescence_count_initialiser
netrom: Fix a data-race around sysctl_netrom_default_path_quality
netfilter: nf_conntrack_h323: Add protection for bmp length out of range
netfilter: nf_tables: mark set as dead when unbinding anonymous set with timeout
netfilter: nft_ct: fix l3num expectations with inet pseudo family
netfilter: nf_tables: reject constant set with timeout
netfilter: nf_tables: disallow anonymous set with timeout flag
net/rds: fix WARNING in rds_conn_connect_if_down
net: dsa: microchip: fix register write order in ksz8_ind_write8()
...
|
|
Add of_match table for "ti,amc6821" compatible string.
This fixes automatic driver loading by userspace when using device-tree,
and if built as a module like major linux distributions do.
While devices probe just fine with i2c_device_id table, userspace can't
match the "ti,amc6821" compatible string from dt with the plain
"amc6821" device id. As a result, the kernel module can not be loaded.
Cc: stable@vger.kernel.org
Signed-off-by: Josua Mayer <josua@solid-run.com>
Link: https://lore.kernel.org/r/20240307-amc6821-of-match-v1-1-5f40464a3110@solid-run.com
[groeck: Cleaned up patch description]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add the hwcaps added for the 2023 DPISA extensions to the hwcaps test
program.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240306-arm64-2023-dpisa-v5-9-c568edc8ed7f@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Verify that a FPMR frame is generated on systems that support FPMR and not
generated otherwise.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240306-arm64-2023-dpisa-v5-8-c568edc8ed7f@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Teach the generic signal frame parsing code about the newly added FPMR
frame, avoiding warnings every time one is generated.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240306-arm64-2023-dpisa-v5-7-c568edc8ed7f@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The 2023 architecture extensions include a large number of floating point
features, most of which simply add new instructions. Add hwcaps so that
userspace can enumerate these features.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240306-arm64-2023-dpisa-v5-6-c568edc8ed7f@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Add a new regset to expose FPMR via ptrace. It is not added to the FPSIMD
registers since that structure is exposed elsewhere without any allowance
for extension we don't add there.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240306-arm64-2023-dpisa-v5-5-c568edc8ed7f@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Expose FPMR in the signal context on systems where it is supported. The
kernel validates the exact size of the FPSIMD registers so we can't readily
add it to fpsimd_context without disruption.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240306-arm64-2023-dpisa-v5-4-c568edc8ed7f@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
FEAT_FPMR defines a new EL0 accessible register FPMR use to configure the
FP8 related features added to the architecture at the same time. Detect
support for this register and context switch it for EL0 when present.
Due to the sharing of responsibility for saving floating point state
between the host kernel and KVM FP8 support is not yet implemented in KVM
and a stub similar to that used for SVCR is provided for FPMR in order to
avoid bisection issues. To make it easier to share host state with the
hypervisor we store FPMR as a hardened usercopy field in uw (along with
some padding).
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240306-arm64-2023-dpisa-v5-3-c568edc8ed7f@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
FEAT_FPMR provides a new generally accessible architectural register FPMR.
This is only accessible to EL0 and EL1 when HCRX_EL2.EnFPM is set to 1,
do this when the host is running. The guest part will be done along with
context switching the new register and exposing it via guest management.
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240306-arm64-2023-dpisa-v5-2-c568edc8ed7f@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The 2023 architecture extensions have defined several new ID registers,
hook them up to the cpufeature code so we can add feature checks and hwcaps
based on their contents.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240306-arm64-2023-dpisa-v5-1-c568edc8ed7f@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
This aligns broadcast sync_timeout with existing connection timeouts
which are 20 seconds long.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
for-6.9/block
Pull NVMe updates from Keith:
"nvme updates for Linux 6.9
- RDMA target enhancements (Max)
- Fabrics fixes (Max, Guixin, Hannes)
- Atomic queue_limits usage (Christoph)
- Const use for class_register (Ricardo)
- Identification error handling fixes (Shin'ichiro, Keith)"
* tag 'nvme-6.9-2024-03-07' of git://git.infradead.org/nvme: (31 commits)
nvme: clear caller pointer on identify failure
nvme: host: fix double-free of struct nvme_id_ns in ns_update_nuse()
nvme: fcloop: make fcloop_class constant
nvme: fabrics: make nvmf_class constant
nvme: core: constify struct class usage
nvme-fabrics: typo in nvmf_parse_key()
nvme-multipath: use atomic queue limits API for stacking limits
nvme-multipath: pass queue_limits to blk_alloc_disk
nvme: use the atomic queue limits update API
nvme: cleanup nvme_configure_metadata
nvme: don't query identify data in configure_metadata
nvme: split out a nvme_identify_ns_nvm helper
nvme: move common logic into nvme_update_ns_info
nvme: move setting the write cache flags out of nvme_set_queue_limits
nvme: move a few things out of nvme_update_disk_info
nvme: don't use nvme_update_disk_info for the multipath disk
nvme: move blk_integrity_unregister into nvme_init_integrity
nvme: cleanup the nvme_init_integrity calling conventions
nvme: move max_integrity_segments handling out of nvme_init_integrity
nvme: remove nvme_revalidate_zones
...
|
|
PM constants for PCI devices are defined with bitwise annotation.
When used as is, sparse complains about that:
.../catpt/dsp.c:390:9: warning: restricted pci_power_t degrades to integer
.../catpt/dsp.c:414:9: warning: restricted pci_power_t degrades to integer
Force them to be u32 in the driver.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://msgid.link/r/20240307163734.3852754-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
hda_component.h uses hda_codec_dev from sound/hda_codec.h.
Include sound/hda_codec.h instead of assuming that it has already
been included by the parent .c file.
This isn't causing any problems with current code, so no need to
backport to older kernels.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Message-ID: <20240307111216.45053-2-rf@opensource.cirrus.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Add the conventional include guards around the content of the
hda_component.h header file. This prevents double-declaration of
struct hda_component if the header gets included multiple times.
This isn't causing any problems with current code, so no need to
backport to older kernels.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Message-ID: <20240307111216.45053-1-rf@opensource.cirrus.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Since commit 43a7206b0963 ("driver core: class: make class_register() take
a const *"), the driver core allows for struct class to be in read-only
memory, so move the tb_class structure to be declared at build time placing
it into read-only memory, instead of having to be dynamically allocated at
boot time.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Since commit 43a7206b0963 ("driver core: class: make class_register() take
a const *"), the driver core allows for struct class to be in read-only
memory, so move the mt_class structure to be declared at build time placing
it into read-only memory, instead of having to be dynamically allocated at
boot time.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
of_gpio.h is deprecated and subject to remove.
The driver doesn't use it, simply remove the unused header.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
lkp test robot reported unhandled relocation type: R_390_GOTPCDBL, when
kernel is built with -fno-PIE. relocs tool reads vmlinux and handles
absolute relocations. PC relative relocs doesn't need adjustment.
Also, the R_390_GOTPCDBL/R_390_GOTOFF64 relocations are present
currently only when KASAN is enabled.
The following program can create a R_390_GOTPCDBL/R_390_GOTOFF64 reloc
(with fPIE/fPIC).
void funcb(int *b) {
*b = *b + 100;
}
void gen_gotoff(void)
{
int b = 10;
funcb (&b);
}
gcc -c sample.c -fPIC -fsanitize=kernel-address --param asan-stack=1
The above example (built with -fPIC) was linked to one of the
built-in.a (built with -fno-PIE) and checked for correctness with kaslr
enabled. Both the relocs turns out relative and can be skipped.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202402221404.T2TGs8El-lkp@intel.com/
Fixes: 55dc65b46023 ("s390: add relocs tool")
Signed-off-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Acked-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
It is not safe to unbind and then rebind a subdevice in the rcar-vin
pipeline. Depending on what subdevice and in what order a device is
rebound the rcar-vin driver can misbehave.
Until this can be solved suppress the files in sysfs which allows for
this. This is in line with what is done for other subdevices exclusively
use with the rcar-vin pipeline, e.g. rcar-csi2.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Merge series from Zhang Yi <zhangyi@everest-semi.com>:
We found that using 0x45 as the default value for interrupt-clk
would cause a headset detection error.So we took 0x00 as the default
value for interrupt-clk and passed the test.
We removed mic1-src and mic2-src, which were not used.
|
|
The SPI core inconsistently uses the marker value for unused chip select
pin. Define a constant (with appropriate type) and introduce is_valid_cs()
helper function to avoid spreading this inconsistency in the future.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://msgid.link/r/20240307150256.3789138-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
First of all, last_cs_index_mask should be aligned with the original
cs_index_mask, which is 16-bit (for now) wide. Use the same pattern
for the last_cs_index_mask.
Second, last_cs can be negative and since 'char' is equal to 'unsigned
char' in the kernel, it's incorrect, strictly speaking, to assign
signed number to it. Use s8 type as it's done for *_native_cs ones.
With this change, regroup a bit the ordering to avoid too much memory
space to be wasted due to paddings. Shuffle kernel documentation
accordignly.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://msgid.link/r/20240307150256.3789138-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Some of the parts related to the chip select are using BIT() macro
the rest are using plain numbers. Unify all of them to use BIT().
While at it, make the (repetitive) comment clearer when assigning
cs_index_mask during SPI target device enumeration.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://msgid.link/r/20240307150256.3789138-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Jason Xing says:
====================
tcp: add two missing addresses when using trace
When I reviewed other people's patch [1], I noticed that similar things
also happen in tcp_event_skb class and tcp_event_sk_skb class. They
don't print those two addrs of skb/sk which already exist.
In this patch, I just do as other trace functions do, like
trace_net_dev_start_xmit(), to know the exact flow or skb we would like
to know in case some systems doesn't support BPF programs well or we
have to use /sys/kernel/debug/tracing only for some reasons.
[1]
Link: https://lore.kernel.org/netdev/CAL+tcoAhvFhXdr1WQU8mv_6ZX5nOoNpbOLAB6=C+DB-qXQ11Ew@mail.gmail.com/
v2
Link: https://lore.kernel.org/netdev/CANn89iJcScraKAUk1GzZFoOO20RtC9iXpiJ4LSOWT5RUAC_QQA@mail.gmail.com/
1. change the description.
====================
Link: https://lore.kernel.org/r/20240304092934.76698-1-kerneljasonxing@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Use the existing parameter and print the address of skbaddr
as other trace functions do.
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Printing the addresses can help us identify the exact skb/sk
for those system in which it's not that easy to run BPF program.
As we can see, it already fetches those, then use it directly
and it will print like below:
...tcp_retransmit_skb: skbaddr=XXX skaddr=XXX family=AF_INET...
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Maxime Chevallier says:
====================
doc: sfp-phylink: update the porting guide
Here's a V3 for an update on the phylink porting guide. The only
difference with V2 is a whitespace fix along with a line-wrap.
The main point of the update is the description of a basic process to
follow to expose one or more PCS to phylink. Let me know if you spot any
inaccuracies in the guide.
The second patch is a simple fixup on some in-code doc that was spotted
while updating the guide.
Link to V2: https://lore.kernel.org/netdev/20240228095755.1499577-1-maxime.chevallier@bootlin.com/
Link to V1: https://lore.kernel.org/netdev/20240220160406.3363002-1-maxime.chevallier@bootlin.com/
====================
Link: https://lore.kernel.org/r/20240301164309.3643849-1-maxime.chevallier@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
commit 4d72c3bb60dd ("net: phylink: strip out pre-March 2020 legacy code")
dropped the mac_pcs_get_state ops in phylink_mac_ops in favor of
dedicated PCS operation pcs_get_state. However, the documentation for
the pcs_get_state ops was incorrectly converted and now self-references.
Drop the extra comment.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Now that phylink has a comprehensive PCS support, update the porting
guide to explain the process of supporting the PCS configuration. This
also removed outdated references to phylink_config fields that no longer
exists.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
With commit 36bbc5b4ffab ("cacheinfo: Allow early detection and population
of cache attributes") the shared cpu list for each cache level higher than
L1 is rebuilt even if the list already has been set up.
This is caused by the removal of the cpumask_empty() check within
cache_shared_cpu_map_setup().
However architectures can enforce that the shared cpu list is not rebuilt
by simply setting cpu_map_populated of the per cpu cache info structure to
true, which is also the fix for this problem.
Before:
$ cat /sys/devices/system/cpu/cpu1/cache/index2/shared_cpu_list
0-7
After:
$ cat /sys/devices/system/cpu/cpu1/cache/index2/shared_cpu_list
1
Fixes: 36bbc5b4ffab ("cacheinfo: Allow early detection and population of cache attributes")
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Upon calling the pkey module to (re-)derive an protected
key from a secure key the PAES implementation did a retry
3 times with an 1000 ms sleep after each failure. This
patch removes this retry loop - retries should be done
if needed in a lower layer but the consumer of the pkey
module functions should not be bothered with retries.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
This patch reworks and improves the pkey retry behavior for the
pkey_ep11key2pkey() function. In contrast to the pkey_skey2pkey()
function which is used to trigger a protected key derivation from an
CCA secure data or cipher key the EP11 counterpart function had no
proper retry loop implemented. This patch now introduces code which
acts similar to the retry already done for CCA keys for this function
used for EP11 keys.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
This patch reworks and improves the zcrypt retry behavior:
- The zcrypt_rescan_req counter has been removed. This
counter variable has been increased on some transport
errors and was used as a gatekeeper for AP bus rescans.
- Rework of the zcrypt_process_rescan() function to not
use the above counter variable any more. Instead now
always the ap_bus_force_rescan() function is called
(as this has been improved with a previous patch).
- As the zcrpyt_process_rescan() function is called in
all cprb send functions in case of the first attempt
to send failed with ENODEV now before the next attempt
to send an cprb is started.
- Introduce a define ZCRYPT_WAIT_BINDINGS_COMPLETE_MS
for the amount of milliseconds to have the zcrypt API
wait for AP bindings complete. This amount has been
reduced to 30s (was 60s). Some playing around showed
that 30s is a really fair limit.
The result of the above together with the patches to
improve the AP scan bus functions is that after the
first loop of cprb send retries when the result is a
ENODEV the AP bus scan is always triggered (synchronous).
If the AP bus scan detects changes in the configuration,
all the send functions now retry when the first attempt
was failing with ENODEV in the hope that now a suitable
device has appeared.
About concurrency: The ap_bus_force_rescan() uses a mutex
to ensure only one active AP bus scan is running. Another
caller of this function is blocked as long as the scan is
running but does not cause yet another scan. Instead the
result of the 'other' scan is used. This affects only tasks
which run into an initial ENODEV. Tasks with successful
delivery of cprbs will never invoke the bus scan and thus
never get blocked by the mutex.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
The both functions zcrypt_send_cprb() and zcrypt_send_ep11_cprb()
are used to send CPRBs in-kernel from different sources. For
example the pkey module may call one of the functions in
zcrypt_ep11misc.c to trigger a derive of a protected key from
a secure key blob via an existing crypto card. These both
functions are then the internal API to send the CPRB and
receive the response.
All the ioctl functions to send an CPRB down to the addressed
crypto card use some kind of retry mechanism. When the first
attempt fails with ENODEV, a bus rescan is triggered and a
loop with retries is carried out.
For the both named internal functions there was never any
retry attempt made. This patch now introduces the retry code
even for this both internal functions to have effectively
same behavior on sending an CPRB from an in-kernel source
and sending an CPRB from userspace via ioctl.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Rework the invocations around ap_scan_bus():
- Protect ap_scan_bus() with a mutex to make sure only one
scan at a time is running.
- The workqueue invocation which is triggered by either the
module init or via AP bus scan timer expiration uses this
mutex and if there is already a scan running, the work
is simple aborted (as the job is done by another task).
- The ap_bus_force_rescan() which is invoked by higher level
layers mostly on failures which indicate a bus scan may
help is reworked to call ap_scan_bus() direct instead of
enqueuing work into a system workqueue and waiting for that
to finish. Of course the mutex is respected and in case of
another task already running a bus scan the shortcut of
waiting for this scan to finish and reusing the scan result
is taken.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
The AP scan bus function now returns true if there have
been any config changes detected. This will become
important in a follow up patch which will exploit this
hint for further actions. This also required to have
the AP scan bus timer callback reworked as the function
signature has changed to bool ap_scan_bus(void).
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
