| Age | Commit message (Collapse) | Author |
|---|
|
This reverts commits 86327e8eb94c ("memcg: drop kmem.limit_in_bytes") and
partially reverts 58056f77502f ("memcg, kmem: further deprecate
kmem.limit_in_bytes") which have incrementally removed support for the
kernel memory accounting hard limit. Unfortunately it has turned out that
there is still userspace depending on the existence of
memory.kmem.limit_in_bytes [1]. The underlying functionality is not
really required but the non-existent file just confuses the userspace
which fails in the result. The patch to fix this on the userspace side
has been submitted but it is hard to predict how it will propagate through
the maze of 3rd party consumers of the software.
Now, reverting alone 86327e8eb94c is not an option because there is
another set of userspace which cannot cope with ENOTSUPP returned when
writing to the file. Therefore we have to go and revisit 58056f77502f as
well. There are two ways to go ahead. Either we give up on the
deprecation and fully revert 58056f77502f as well or we can keep
kmem.limit_in_bytes but make the write a noop and warn about the fact.
This should work for both known breaking workloads which depend on the
existence but do not depend on the hard limit enforcement.
Note to backporters to stable trees. a8c49af3be5f ("memcg: add per-memcg
total kernel memory stat") introduced in 4.18 has added memcg_account_kmem
so the accounting is not done by obj_cgroup_charge_pages directly for v1
anymore. Prior kernels need to add it explicitly (thanks to Johannes for
pointing this out).
[akpm@linux-foundation.org: fix build - remove unused local]
Link: http://lkml.kernel.org/r/20230920081101.GA12096@linuxonhyperv3.guj3yctzbm1etfxqx2vob5hsef.xx.internal.cloudapp.net [1]
Link: https://lkml.kernel.org/r/ZRE5VJozPZt9bRPy@dhcp22.suse.cz
Fixes: 86327e8eb94c ("memcg: drop kmem.limit_in_bytes")
Fixes: 58056f77502f ("memcg, kmem: further deprecate kmem.limit_in_bytes")
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jeremi Piotrowski <jpiotrowski@linux.microsoft.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Tejun heo <tj@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
While stress-testing zswap a memory corruption was happening when writing
back pages. __frontswap_store used to check for duplicate entries before
attempting to store a page in zswap, this was because if the store fails
the old entry isn't removed from the tree. This change removes duplicate
entries in zswap_store before the actual attempt.
[cerasuolodomenico@gmail.com: add a warning and a comment, per Johannes]
Link: https://lkml.kernel.org/r/20230925130002.1929369-1-cerasuolodomenico@gmail.com
Link: https://lkml.kernel.org/r/20230922172211.1704917-1-cerasuolodomenico@gmail.com
Fixes: 42c06a0e8ebe ("mm: kill frontswap")
Signed-off-by: Domenico Cerasuolo <cerasuolodomenico@gmail.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Nhat Pham <nphamcs@gmail.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Domenico Cerasuolo <cerasuolodomenico@gmail.com>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When called with a swap entry that does not embed a PFN (e.g.
PTE_MARKER_POISONED or PTE_MARKER_UFFD_WP), the previous implementation of
set_huge_pte_at() would either cause a BUG() to fire (if CONFIG_DEBUG_VM
is enabled) or cause a dereference of an invalid address and subsequent
panic.
arm64's huge pte implementation supports multiple huge page sizes, some of
which are implemented in the page table with multiple contiguous entries.
So set_huge_pte_at() needs to work out how big the logical pte is, so that
it can also work out how many physical ptes (or pmds) need to be written.
It previously did this by grabbing the folio out of the pte and querying
its size.
However, there are cases when the pte being set is actually a swap entry.
But this also used to work fine, because for huge ptes, we only ever saw
migration entries and hwpoison entries. And both of these types of swap
entries have a PFN embedded, so the code would grab that and everything
still worked out.
But over time, more calls to set_huge_pte_at() have been added that set
swap entry types that do not embed a PFN. And this causes the code to go
bang. The triggering case is for the uffd poison test, commit
99aa77215ad0 ("selftests/mm: add uffd unit test for UFFDIO_POISON"), which
causes a PTE_MARKER_POISONED swap entry to be set, coutesey of commit
8a13897fb0da ("mm: userfaultfd: support UFFDIO_POISON for hugetlbfs") -
added in v6.5-rc7. Although review shows that there are other call sites
that set PTE_MARKER_UFFD_WP (which also has no PFN), these don't trigger
on arm64 because arm64 doesn't support UFFD WP.
Arguably, the root cause is really due to commit 18f3962953e4 ("mm:
hugetlb: kill set_huge_swap_pte_at()"), which aimed to simplify the
interface to the core code by removing set_huge_swap_pte_at() (which took
a page size parameter) and replacing it with calls to set_huge_pte_at()
where the size was inferred from the folio, as descibed above. While that
commit didn't break anything at the time, it did break the interface
because it couldn't handle swap entries without PFNs. And since then new
callers have come along which rely on this working. But given the
brokeness is only observable after commit 8a13897fb0da ("mm: userfaultfd:
support UFFDIO_POISON for hugetlbfs"), that one gets the Fixes tag.
Now that we have modified the set_huge_pte_at() interface to pass the huge
page size in the previous patch, we can trivially fix this issue.
Link: https://lkml.kernel.org/r/20230922115804.2043771-3-ryan.roberts@arm.com
Fixes: 8a13897fb0da ("mm: userfaultfd: support UFFDIO_POISON for hugetlbfs")
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Axel Rasmussen <axelrasmussen@google.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Cc: <stable@vger.kernel.org> [6.5+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "Fix set_huge_pte_at() panic on arm64", v2.
This series fixes a bug in arm64's implementation of set_huge_pte_at(),
which can result in an unprivileged user causing a kernel panic. The
problem was triggered when running the new uffd poison mm selftest for
HUGETLB memory. This test (and the uffd poison feature) was merged for
v6.5-rc7.
Ideally, I'd like to get this fix in for v6.6 and I've cc'ed stable
(correctly this time) to get it backported to v6.5, where the issue first
showed up.
Description of Bug
==================
arm64's huge pte implementation supports multiple huge page sizes, some of
which are implemented in the page table with multiple contiguous entries.
So set_huge_pte_at() needs to work out how big the logical pte is, so that
it can also work out how many physical ptes (or pmds) need to be written.
It previously did this by grabbing the folio out of the pte and querying
its size.
However, there are cases when the pte being set is actually a swap entry.
But this also used to work fine, because for huge ptes, we only ever saw
migration entries and hwpoison entries. And both of these types of swap
entries have a PFN embedded, so the code would grab that and everything
still worked out.
But over time, more calls to set_huge_pte_at() have been added that set
swap entry types that do not embed a PFN. And this causes the code to go
bang. The triggering case is for the uffd poison test, commit
99aa77215ad0 ("selftests/mm: add uffd unit test for UFFDIO_POISON"), which
causes a PTE_MARKER_POISONED swap entry to be set, coutesey of commit
8a13897fb0da ("mm: userfaultfd: support UFFDIO_POISON for hugetlbfs") -
added in v6.5-rc7. Although review shows that there are other call sites
that set PTE_MARKER_UFFD_WP (which also has no PFN), these don't trigger
on arm64 because arm64 doesn't support UFFD WP.
If CONFIG_DEBUG_VM is enabled, we do at least get a BUG(), but otherwise,
it will dereference a bad pointer in page_folio():
static inline struct folio *hugetlb_swap_entry_to_folio(swp_entry_t entry)
{
VM_BUG_ON(!is_migration_entry(entry) && !is_hwpoison_entry(entry));
return page_folio(pfn_to_page(swp_offset_pfn(entry)));
}
Fix
===
The simplest fix would have been to revert the dodgy cleanup commit
18f3962953e4 ("mm: hugetlb: kill set_huge_swap_pte_at()"), but since
things have moved on, this would have required an audit of all the new
set_huge_pte_at() call sites to see if they should be converted to
set_huge_swap_pte_at(). As per the original intent of the change, it
would also leave us open to future bugs when people invariably get it
wrong and call the wrong helper.
So instead, I've added a huge page size parameter to set_huge_pte_at().
This means that the arm64 code has the size in all cases. It's a bigger
change, due to needing to touch the arches that implement the function,
but it is entirely mechanical, so in my view, low risk.
I've compile-tested all touched arches; arm64, parisc, powerpc, riscv,
s390, sparc (and additionally x86_64). I've additionally booted and run
mm selftests against arm64, where I observe the uffd poison test is fixed,
and there are no other regressions.
This patch (of 2):
In order to fix a bug, arm64 needs to be told the size of the huge page
for which the pte is being set in set_huge_pte_at(). Provide for this by
adding an `unsigned long sz` parameter to the function. This follows the
same pattern as huge_pte_clear().
This commit makes the required interface modifications to the core mm as
well as all arches that implement this function (arm64, parisc, powerpc,
riscv, s390, sparc). The actual arm64 bug will be fixed in a separate
commit.
No behavioral changes intended.
Link: https://lkml.kernel.org/r/20230922115804.2043771-1-ryan.roberts@arm.com
Link: https://lkml.kernel.org/r/20230922115804.2043771-2-ryan.roberts@arm.com
Fixes: 8a13897fb0da ("mm: userfaultfd: support UFFDIO_POISON for hugetlbfs")
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> [powerpc 8xx]
Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com> [vmalloc change]
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Cc: <stable@vger.kernel.org> [6.5+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When updating the maple tree iterator to avoid rewalks, an issue was
introduced when shifting beyond the limits. This can be seen by trying to
go to the previous address of 0, which would set the maple node to
MAS_NONE and keep the range as the last entry.
Subsequent calls to mas_find() would then search upwards from mas->last
and skip the value at mas->index/mas->last. This showed up as a bug in
mprotect which skips the actual VMA at the current range after attempting
to go to the previous VMA from 0.
Since MAS_NONE may already be set when searching for a value that isn't
contained within a node, changing the handling of MAS_NONE in mas_find()
would make the code more complicated and error prone. Furthermore, there
was no way to tell which limit was hit, and thus which action to take
(next or the entry at the current range).
This solution is to add two states to track what happened with the
previous iterator action. This allows for the expected behaviour of the
next command to return the correct item (either the item at the range
requested, or the next/previous).
Tests are also added and updated accordingly.
Link: https://lkml.kernel.org/r/20230921181236.509072-3-Liam.Howlett@oracle.com
Link: https://gist.github.com/heatd/85d2971fae1501b55b6ea401fbbe485b
Link: https://lore.kernel.org/linux-mm/20230921181236.509072-1-Liam.Howlett@oracle.com/
Fixes: 39193685d585 ("maple_tree: try harder to keep active node with mas_prev()")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reported-by: Pedro Falcato <pedro.falcato@gmail.com>
Closes: https://gist.github.com/heatd/85d2971fae1501b55b6ea401fbbe485b
Closes: https://bugs.archlinux.org/task/79656
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "maple_tree: Fix mas_prev() state regression".
Pedro Falcato retported an mprotect regression [1] which was bisected back
to the iterator changes for maple tree. Root cause analysis showed the
mas_prev() running off the end of the VMA space (previous from 0) followed
by mas_find(), would skip the first value.
This patchset introduces maple state underflow/overflow so the sequence of
calls on the maple state will return what the user expects.
Users who encounter this bug may see mprotect(), userfaultfd_register(),
and mlock() fail on VMAs mapped with address 0.
This patch (of 2):
Instead of constantly checking each possibility of the maple state,
create a fast path that will skip over checking unlikely states.
Link: https://lkml.kernel.org/r/20230921181236.509072-1-Liam.Howlett@oracle.com
Link: https://lkml.kernel.org/r/20230921181236.509072-2-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Pedro Falcato <pedro.falcato@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
In nilfs_gccache_submit_read_data(), brelse(bh) is called to drop the
reference count of bh when the call to nilfs_dat_translate() fails. If
the reference count hits 0 and its owner page gets unlocked, bh may be
freed. However, bh->b_page is dereferenced to put the page after that,
which may result in a use-after-free bug. This patch moves the release
operation after unlocking and putting the page.
NOTE: The function in question is only called in GC, and in combination
with current userland tools, address translation using DAT does not occur
in that function, so the code path that causes this issue will not be
executed. However, it is possible to run that code path by intentionally
modifying the userland GC library or by calling the GC ioctl directly.
[konishi.ryusuke@gmail.com: NOTE added to the commit log]
Link: https://lkml.kernel.org/r/1543201709-53191-1-git-send-email-bianpan2016@163.com
Link: https://lkml.kernel.org/r/20230921141731.10073-1-konishi.ryusuke@gmail.com
Fixes: a3d93f709e89 ("nilfs2: block cache for garbage collection")
Signed-off-by: Pan Bian <bianpan2016@163.com>
Reported-by: Ferry Meng <mengferry@linux.alibaba.com>
Closes: https://lkml.kernel.org/r/20230818092022.111054-1-mengferry@linux.alibaba.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
In order to fix the L1TF vulnerability, x86 can invert the PTE bits for
PROT_NONE VMAs, which means we cannot move from one PTE to the next by
adding 1 to the PFN field of the PTE. This results in the BUG reported at
[1].
Abstract advancing the PTE to the next PFN through a pte_next_pfn()
function/macro.
Link: https://lkml.kernel.org/r/20230920040958.866520-1-willy@infradead.org
Fixes: bcc6cc832573 ("mm: add default definition of set_ptes()")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reported-by: syzbot+55cc72f8cc3a549119df@syzkaller.appspotmail.com
Closes: https://lkml.kernel.org/r/000000000000d099fa0604f03351@google.com [1]
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Even though we had successfully mapped the relevant page, we would rarely
return success from filemap_map_folio_range(). That leads to falling back
from the VMA lock path to the mmap_lock path, which is a speed &
scalability issue. Found by inspection.
Link: https://lkml.kernel.org/r/20230920035336.854212-1-willy@infradead.org
Fixes: 617c28ecab22 ("filemap: batch PTE mappings")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The elf-fdpic loader hard sets the process personality to either
PER_LINUX_FDPIC for true elf-fdpic binaries or to PER_LINUX for normal ELF
binaries (in this case they would be constant displacement compiled with
-pie for example). The problem with that is that it will lose any other
bits that may be in the ELF header personality (such as the "bug
emulation" bits).
On the ARM architecture the ADDR_LIMIT_32BIT flag is used to signify a
normal 32bit binary - as opposed to a legacy 26bit address binary. This
matters since start_thread() will set the ARM CPSR register as required
based on this flag. If the elf-fdpic loader loses this bit the process
will be mis-configured and crash out pretty quickly.
Modify elf-fdpic loader personality setting so that it preserves the upper
three bytes by using the SET_PERSONALITY macro to set it. This macro in
the generic case sets PER_LINUX and preserves the upper bytes.
Architectures can override this for their specific use case, and ARM does
exactly this.
The problem shows up quite easily running under qemu using the ARM
architecture, but not necessarily on all types of real ARM hardware. If
the underlying ARM processor does not support the legacy 26-bit addressing
mode then everything will work as expected.
Link: https://lkml.kernel.org/r/20230907011808.2985083-1-gerg@kernel.org
Fixes: 1bde925d23547 ("fs/binfmt_elf_fdpic.c: provide NOMMU loader for regular ELF binaries")
Signed-off-by: Greg Ungerer <gerg@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Greg Ungerer <gerg@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Pull smb server fixes from Steve French:
"Two SMB3 server fixes for null pointer dereferences:
- invalid SMB3 request case (fixes issue found in testing the read
compound patch)
- iovec error case in response processing"
* tag '6.6-rc3-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: check iov vector index in ksmbd_conn_write()
ksmbd: return invalid parameter error response if smb2 request is invalid
|
|
Pull ceph fixes from Ilya Dryomov:
"A series that fixes an involved 'double watch error' deadlock in RBD
marked for stable and two cleanups"
* tag 'ceph-for-6.6-rc4' of https://github.com/ceph/ceph-client:
rbd: take header_rwsem in rbd_dev_refresh() only when updating
rbd: decouple parent info read-in from updating rbd_dev
rbd: decouple header read-in from updating rbd_dev->header
rbd: move rbd_dev_refresh() definition
Revert "ceph: make members in struct ceph_mds_request_args_ext a union"
ceph: remove unnecessary check for NULL in parse_longname()
|
|
Pull xfs fix from Chandan Babu:
- fix for commit 68b957f64fca ("xfs: load uncached unlinked inodes into
memory on demand") which address review comments provided by Dave
Chinner
* tag 'xfs-6.6-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: fix reloading entire unlinked bucket lists
|
|
Add various tests to check maximum number of supported programs
being attached:
# ./vmtest.sh -- ./test_progs -t tc_opts
[...]
./test_progs -t tc_opts
[ 1.185325] bpf_testmod: loading out-of-tree module taints kernel.
[ 1.186826] bpf_testmod: module verification failed: signature and/or required key missing - tainting kernel
[ 1.270123] tsc: Refined TSC clocksource calibration: 3407.988 MHz
[ 1.272428] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x311fc932722, max_idle_ns: 440795381586 ns
[ 1.276408] clocksource: Switched to clocksource tsc
#252 tc_opts_after:OK
#253 tc_opts_append:OK
#254 tc_opts_basic:OK
#255 tc_opts_before:OK
#256 tc_opts_chain_classic:OK
#257 tc_opts_chain_mixed:OK
#258 tc_opts_delete_empty:OK
#259 tc_opts_demixed:OK
#260 tc_opts_detach:OK
#261 tc_opts_detach_after:OK
#262 tc_opts_detach_before:OK
#263 tc_opts_dev_cleanup:OK
#264 tc_opts_invalid:OK
#265 tc_opts_max:OK <--- (new test)
#266 tc_opts_mixed:OK
#267 tc_opts_prepend:OK
#268 tc_opts_replace:OK
#269 tc_opts_revision:OK
Summary: 18/0 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230929204121.20305-2-daniel@iogearbox.net
|
|
After Paul's recent improvement to syzkaller to improve coverage for
bpf_mprog and tcx, it hit a splat that the program limit was surpassed.
What happened is that the maximum number of progs got added, followed
by another prog add request which adds with BPF_F_BEFORE flag relative
to the last program in the array. The idx >= bpf_mprog_max() check in
bpf_mprog_attach() still passes because the index is below the maximum
but the maximum will be surpassed. We need to add a check upfront for
insertions to catch this situation.
Fixes: 053c8e1f235d ("bpf: Add generic attach/detach/query API for multi-progs")
Reported-by: syzbot+baa44e3dbbe48e05c1ad@syzkaller.appspotmail.com
Reported-by: syzbot+b97d20ed568ce0951a06@syzkaller.appspotmail.com
Reported-by: syzbot+2558ca3567a77b7af4e3@syzkaller.appspotmail.com
Co-developed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Tested-by: syzbot+baa44e3dbbe48e05c1ad@syzkaller.appspotmail.com
Tested-by: syzbot+b97d20ed568ce0951a06@syzkaller.appspotmail.com
Link: https://github.com/google/syzkaller/pull/4207
Link: https://lore.kernel.org/bpf/20230929204121.20305-1-daniel@iogearbox.net
|
|
Mark Blakeney reported that when suspending system with a Thunderbolt
dock connected and then unplugging the dock before resume (which is
pretty normal flow with laptops), resuming takes long time.
What happens is that the PCIe link from the root port to the PCIe switch
inside the Thunderbolt device does not train (as expected, the link is
unplugged):
pcieport 0000:00:07.2: restoring config space at offset 0x24 (was 0x3bf12001, writing 0x3bf12001)
pcieport 0000:00:07.0: waiting 100 ms for downstream link
pcieport 0000:01:00.0: not ready 1023ms after resume; giving up
However, at this point we still try to resume the devices below that
unplugged link:
pcieport 0000:01:00.0: Unable to change power state from D3cold to D0, device inaccessible
...
pcieport 0000:01:00.0: restoring config space at offset 0x38 (was 0xffffffff, writing 0x0)
...
pcieport 0000:02:02.0: waiting 100 ms for downstream link, after activation
And this is the link from PCIe switch downstream port to the xHCI on the
dock:
xhci_hcd 0000:03:00.0: not ready 65535ms after resume; giving up
xhci_hcd 0000:03:00.0: Unable to change power state from D3cold to D0, device inaccessible
xhci_hcd 0000:03:00.0: restoring config space at offset 0x3c (was 0xffffffff, writing 0x1ff)
This ends up slowing down the resume time considerably. For this reason
mark these devices as disconnected if the link above them did not train
properly.
Fixes: e8b908146d44 ("PCI/PM: Increase wait time after resume")
Link: https://lore.kernel.org/r/20230918053041.1018876-1-mika.westerberg@linux.intel.com
Reported-by: Mark Blakeney <mark.blakeney@bullet-systems.net>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217915
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Cc: stable@vger.kernel.org # v6.4+
|
|
Previously of_pci_make_dev_node() leaked a cset if it failed to create a
device node for the PCI device with of_changeset_create_node().
Destroy the cset if of_changeset_create_node() fails.
Fixes: 407d1a51921e ("PCI: Create device tree node for bridge")
Link: https://lore.kernel.org/r/1696007417-42059-1-git-send-email-lizhi.hou@amd.com
Reported-by: Herve Codina <herve.codina@bootlin.com>
Closes: https://lore.kernel.org/all/20230911171319.495bb837@bootlin.com/
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Herve Codina <herve.codina@bootlin.com>
|
|
of_pci_prop_intr_map() uses uninitialized addr_sz[] values if
of_irq_parse_raw() fails, which leads to intermittent crashes.
Clear addr_sz[] before use so we never use uninitialized elements.
If no valid IRQs are parsed, don't bother adding the interrupt-map
property.
Fixes: 407d1a51921e ("PCI: Create device tree node for bridge")
Link: https://lore.kernel.org/r/1696007448-42127-1-git-send-email-lizhi.hou@amd.com
Reported-by: Jonathan Cameron <Jonathan.Cameron@Huawei.com>
Closes: https://lore.kernel.org/all/20230911154856.000076c3@Huawei.com/
Reported-by: Herve Codina <herve.codina@bootlin.com>
Closes: https://lore.kernel.org/all/20230911171319.495bb837@bootlin.com/
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
[bhelgaas: commit log, add similar report from Herve]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Herve Codina <herve.codina@bootlin.com>
|
|
Commit 31345a0f5901 ("MAINTAINERS: Replace my email address") added 13
instances of ...@broadcom.com and one of only ...@broadcom. I didn't
double check if Broadcom really owns that TLD, but git send-email
doesn't accept it, so add ".com" to that one bogous(?) instance.
Fixes: 31345a0f5901 ("MAINTAINERS: Replace my email address")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
PARF_SLV_ADDR_SPACE_SIZE_2_3_3 is used by qcom_pcie_post_init_2_3_3().
This PCIe slave address space size register offset is 0x358 but was
incorrectly changed to 0x16c by 39171b33f652 ("PCI: qcom: Remove PCIE20_
prefix from register definitions").
This prevented access to slave address space registers like iATU, etc.,
so the IPQ8074 PCIe controller was not enumerated.
Revert back to the correct 0x358 offset and remove the unused
PARF_SLV_ADDR_SPACE_SIZE_2_3_3.
Fixes: 39171b33f652 ("PCI: qcom: Remove PCIE20_ prefix from register definitions")
Link: https://lore.kernel.org/r/20230919102948.1844909-1-quic_srichara@quicinc.com
Tested-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Cc: stable@vger.kernel.org # v6.4+
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata
Pull ATA fixes from Damien Le Moal:
"A larger than usual set of fixes for 6.6-rc4 due to the unexpected
number of fixes needed to address ATA disks suspend/resume issues.
In more detail:
- Add missing additionalProperties on child nodes to the pata-common
DT bindings (Rob)
- Fix handling of the REPORT SUPPORTED OPERATION CODES command to
ignore reserved bits (Niklas)
- Increase port multiplier soft reset timeout to accomodate slow
devices and avoid issues on wakeup (Matthias)
- A couple of minor code fixes to avoid compilation warnings in
libata-core and libata-eh (me)
- Many patches from me to address suspend/resume issues, and in
particular a potential deadlock on resume due to the SCSI disk
driver resume operation not being synchronized with libata EH port
resume handling.
This is addressed by changing the scsi disk driver disk start/stop
control to allow libata to execute disk suspend (spin down) and
resume (spin up) on its own during system suspend/resume. Runtime
suspend/resume control remains with the SCSI disk driver.
Other fixes include:
- Fix libata power management request issuing to avoid races
- Establish a link between ATA ports and SCSI devices to order PM
operations
- Fix device removal to avoid issues with driver rmmod removal
- Fix synchronization of libata device rescan and SCSI disk resume
operation
- Remove libsas PM operations as suspend/resume is handled
directly by the sas controller resume
- Fix the SCSI disk driver to not issue commands to suspended
disks, thus avoiding potential system lock-up on resume"
* tag 'ata-6.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
ata: libata-eh: Fix compilation warning in ata_eh_link_report()
ata: libata-core: Fix compilation warning in ata_dev_config_ncq()
scsi: sd: Do not issue commands to suspended disks on shutdown
ata: libata-core: Do not register PM operations for SAS ports
ata: libata-scsi: Fix delayed scsi_rescan_device() execution
scsi: Do not attempt to rescan suspended devices
ata: libata-scsi: Disable scsi device manage_system_start_stop
scsi: sd: Differentiate system and runtime start/stop management
ata: libata-scsi: link ata port and scsi device
ata: libata-core: Fix port and device removal
ata: libata-core: Fix ata_port_request_pm() locking
ata: libata-sata: increase PMP SRST timeout to 10s
ata: libata-scsi: ignore reserved bits for REPORT SUPPORTED OPERATION CODES
dt-bindings: ata: pata-common: Add missing additionalProperties on child nodes
|
|
Pull block fixes from Jens Axboe:
"Just two minor comment / documentation fixes for the block side"
* tag 'block-6.6-2023-09-28' of git://git.kernel.dk/linux:
block: fix kernel-doc for disk_force_media_change()
block: correct stale comment in rq_qos_wait
|
|
Pull io_uring fix from Jens Axboe:
"A single fix going to stable for the IORING_OP_LINKAT flag handling"
* tag 'io_uring-6.6-2023-09-28' of git://git.kernel.dk/linux:
io_uring/fs: remove sqe->rw_flags checking from LINKAT
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab fixes from Vlastimil Babka:
- stable fix to prevent list corruption when destroying caches with
leftover objects (Rafael Aquini)
- fix for a gotcha in kmalloc_size_roundup() when calling it with too
high size, discovered when recently a networking call site had to be
fixed for a different issue (David Laight)
* tag 'slab-fixes-for-6.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
slab: kmalloc_size_roundup() must not return 0 for non-zero size
mm/slab_common: fix slab_caches list corruption after kmem_cache_destroy()
|
|
Pull drm fixes from Dave Airlie:
"Regular pull, this feel suspiciously light so I expect next week might
be a bit heavier? Let's see how we go. This is from a code point of
view ivpu and i915 fixes.
The only other patch is adding Danilo Krummrich to the nouveau
maintainers, he's agreed to take on more of the roll after Ben
retired.
MAINTAINERS:
- add Danilo for nouveau
ivpu:
- Add PCI ids for Arrow Lake
- Fix memory corruption during IPC
- Avoid dmesg flooding
- 40xx: Wait for clock resource
- 40xx: Fix interrupt usage
- 40xx: Support caching when loading firmware
i915:
- Fix a panic regression on gen8_ggtt_insert_entries
- Fix load issue due to reservation address in ggtt_reserve_guc_top
- Fix a possible deadlock with guc busyness worker"
* tag 'drm-fixes-2023-09-29' of git://anongit.freedesktop.org/drm/drm:
accel/ivpu: Use cached buffers for FW loading
accel/ivpu/40xx: Fix missing VPUIP interrupts
accel/ivpu/40xx: Disable frequency change interrupt
accel/ivpu/40xx: Ensure clock resource ownership Ack before Power-Up
accel/ivpu: Don't flood dmesg with VPU ready message
accel/ivpu: Do not use wait event interruptible
MAINTAINERS: update nouveau maintainers
i915/guc: Get runtime pm in busyness worker only if already active
drm/i915/gt: Fix reservation address in ggtt_reserve_guc_top
i915: Limit the length of an sg list to the requested length
accel/ivpu: Add Arrow Lake pci id
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix a potential spinlock deadlock in gpio-timberdale
- mark the gpio-pmic-eic-sprd driver as one that can sleep
* tag 'gpio-fixes-for-v6.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: pmic-eic-sprd: Add can_sleep flag for PMIC EIC chip
gpio: timberdale: Fix potential deadlock on &tgpio->lock
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"A bunch of clk driver fixes for issues found recently:
- Fix the binding for versaclock3 that was introduced this merge
window so we know what the values are for clk consumers
- Fix a 64-bit division issue in the versaclock3 driver
- Avoid breakage in the versaclock3 driver by rejiggering the enums
used to layout clks
- Fix the parent name of a clk in the Spreadtrum ums512 clk driver
- Fix a suspend/resume issue in Skyworks Si521xx clk driver where
regmap restoration fails because writes are wedged
- Return zero from Tegra bpmp recalc_rate() implementation when an
error occurs so we don't consider an error as a large rate"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: tegra: fix error return case for recalc_rate
clk: si521xx: Fix regmap write accessor
clk: si521xx: Use REGCACHE_FLAT instead of NONE
clk: sprd: Fix thm_parents incorrect configuration
clk: vc3: Make vc3_clk_mux enum values based on vc3_clk enum values
clk: vc3: Fix output clock mapping
clk: vc3: Fix 64 by 64 division
dt-bindings: clock: versaclock3: Add description for #clock-cells property
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply fixes from Sebastian Reichel:
- core: fix use after free during device release
- ab8500: avoid reporting multiple batteries to userspace
- rk817: fix DT node resource leak
- misc. small fixes, mostly for compiler warnings/errors
* tag 'for-v6.6-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply:
power: supply: rk817: Fix node refcount leak
power: supply: core: fix use after free in uevent
power: supply: rt9467: Fix rt9467_run_aicl()
power: supply: rk817: Add missing module alias
power: supply: ucs1002: fix error code in ucs1002_get_property()
power: vexpress: fix -Wvoid-pointer-to-enum-cast warning
power: reset: use capital "OR" for multiple licenses in SPDX
pwr-mlxbf: extend Kconfig to include gpio-mlxbf3 dependency
power: supply: rt5033_charger: recognize EXTCON setting
power: supply: mt6370: Fix missing error code in mt6370_chg_toggle_cfo()
power: supply: ab8500: Set typing and props
|
|
Pull Xtensa fixes from Max Filippov:
- fix build warnings from builds performed with W=1
* tag 'xtensa-20230928' of https://github.com/jcmvbkbc/linux-xtensa:
xtensa: boot/lib: fix function prototypes
xtensa: umulsidi3: fix conditional expression
xtensa: boot: don't add include-dirs
xtensa: iss/network: make functions static
xtensa: tlb: include <asm/tlb.h> for missing prototype
xtensa: hw_breakpoint: include header for missing prototype
xtensa: smp: add headers for missing function prototypes
irqchip: irq-xtensa-mx: include header for missing prototype
xtensa: traps: add <linux/cpu.h> for function prototype
xtensa: stacktrace: include <asm/ftrace.h> for prototype
xtensa: signal: include headers for function prototypes
xtensa: processor.h: add init_arch() prototype
xtensa: ptrace: add prototypes to <asm/ptrace.h>
xtensa: irq: include <asm/traps.h>
xtensa: fault: include <asm/traps.h>
xtensa: add default definition for XCHAL_HAVE_DIV32
|
|
Implement the workaround for ARM Cortex-A520 erratum 2966298. On an
affected Cortex-A520 core, a speculatively executed unprivileged load
might leak data from a privileged load via a cache side channel. The
issue only exists for loads within a translation regime with the same
translation (e.g. same ASID and VMID). Therefore, the issue only affects
the return to EL0.
The workaround is to execute a TLBI before returning to EL0 after all
loads of privileged data. A non-shareable TLBI to any address is
sufficient.
The workaround isn't necessary if page table isolation (KPTI) is
enabled, but for simplicity it will be. Page table isolation should
normally be disabled for Cortex-A520 as it supports the CSV3 feature
and the E0PD feature (used when KASLR is enabled).
Cc: stable@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230921194156.1050055-2-robh@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Add the CPU Part number for the new Arm design.
Cc: stable@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230921194156.1050055-1-robh@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The register por_dt_pmovsr Bits[7:0] indicates overflow from counters 7
to 0. But in arm_cmn_handle_irq(), only handled the overflow status of
Bits[3:0] which results in unhandled overflow status of counters 4 to 7.
So let the overflow status of DTC counters 4 to 7 to be handled.
Fixes: 0ba64770a2f2 ("perf: Add Arm CMN-600 PMU driver")
Signed-off-by: Jing Zhang <renyu.zj@linux.alibaba.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/1695612152-123633-1-git-send-email-renyu.zj@linux.alibaba.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
With a SOCKMAP/SOCKHASH map and an sk_msg program user can steer messages
sent from one TCP socket (s1) to actually egress from another TCP
socket (s2):
tcp_bpf_sendmsg(s1) // = sk_prot->sendmsg
tcp_bpf_send_verdict(s1) // __SK_REDIRECT case
tcp_bpf_sendmsg_redir(s2)
tcp_bpf_push_locked(s2)
tcp_bpf_push(s2)
tcp_rate_check_app_limited(s2) // expects tcp_sock
tcp_sendmsg_locked(s2) // ditto
There is a hard-coded assumption in the call-chain, that the egress
socket (s2) is a TCP socket.
However in commit 122e6c79efe1 ("sock_map: Update sock type checks for
UDP") we have enabled redirects to non-TCP sockets. This was done for the
sake of BPF sk_skb programs. There was no indention to support sk_msg
send-to-egress use case.
As a result, attempts to send-to-egress through a non-TCP socket lead to a
crash due to invalid downcast from sock to tcp_sock:
BUG: kernel NULL pointer dereference, address: 000000000000002f
...
Call Trace:
<TASK>
? show_regs+0x60/0x70
? __die+0x1f/0x70
? page_fault_oops+0x80/0x160
? do_user_addr_fault+0x2d7/0x800
? rcu_is_watching+0x11/0x50
? exc_page_fault+0x70/0x1c0
? asm_exc_page_fault+0x27/0x30
? tcp_tso_segs+0x14/0xa0
tcp_write_xmit+0x67/0xce0
__tcp_push_pending_frames+0x32/0xf0
tcp_push+0x107/0x140
tcp_sendmsg_locked+0x99f/0xbb0
tcp_bpf_push+0x19d/0x3a0
tcp_bpf_sendmsg_redir+0x55/0xd0
tcp_bpf_send_verdict+0x407/0x550
tcp_bpf_sendmsg+0x1a1/0x390
inet_sendmsg+0x6a/0x70
sock_sendmsg+0x9d/0xc0
? sockfd_lookup_light+0x12/0x80
__sys_sendto+0x10e/0x160
? syscall_enter_from_user_mode+0x20/0x60
? __this_cpu_preempt_check+0x13/0x20
? lockdep_hardirqs_on+0x82/0x110
__x64_sys_sendto+0x1f/0x30
do_syscall_64+0x38/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Reject selecting a non-TCP sockets as redirect target from a BPF sk_msg
program to prevent the crash. When attempted, user will receive an EACCES
error from send/sendto/sendmsg() syscall.
Fixes: 122e6c79efe1 ("sock_map: Update sock type checks for UDP")
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20230920102055.42662-1-jakub@cloudflare.com
|
|
Test that we can read with MSG_F_PEEK and then still get correct number
of available bytes through FIONREAD. The recv() (without PEEK) then
returns the bytes as expected. The recv() always worked though because
it was just the available byte reporting that was broke before latest
fixes.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20230926035300.135096-4-john.fastabend@gmail.com
|
|
When data is peek'd off the receive queue we shouldn't considered it
copied from tcp_sock side. When we increment copied_seq this will confuse
tcp_data_ready() because copied_seq can be arbitrarily increased. From
application side it results in poll() operations not waking up when
expected.
Notice tcp stack without BPF recvmsg programs also does not increment
copied_seq.
We broke this when we moved copied_seq into recvmsg to only update when
actual copy was happening. But, it wasn't working correctly either before
because the tcp_data_ready() tried to use the copied_seq value to see
if data was read by user yet. See fixes tags.
Fixes: e5c6de5fa0258 ("bpf, sockmap: Incorrectly handling copied_seq")
Fixes: 04919bed948dc ("tcp: Introduce tcp_read_skb()")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20230926035300.135096-3-john.fastabend@gmail.com
|
|
Before fix e5c6de5fa0258 tcp_read_skb() would increment the tp->copied-seq
value. This (as described in the commit) would cause an error for apps
because once that is incremented the application might believe there is no
data to be read. Then some apps would stall or abort believing no data is
available.
However, the fix is incomplete because it introduces another issue in
the skb dequeue. The loop does tcp_recv_skb() in a while loop to consume
as many skbs as possible. The problem is the call is ...
tcp_recv_skb(sk, seq, &offset)
... where 'seq' is:
u32 seq = tp->copied_seq;
Now we can hit a case where we've yet incremented copied_seq from BPF side,
but then tcp_recv_skb() fails this test ...
if (offset < skb->len || (TCP_SKB_CB(skb)->tcp_flags & TCPHDR_FIN))
... so that instead of returning the skb we call tcp_eat_recv_skb() which
frees the skb. This is because the routine believes the SKB has been collapsed
per comment:
/* This looks weird, but this can happen if TCP collapsing
* splitted a fat GRO packet, while we released socket lock
* in skb_splice_bits()
*/
This can't happen here we've unlinked the full SKB and orphaned it. Anyways
it would confuse any BPF programs if the data were suddenly moved underneath
it.
To fix this situation do simpler operation and just skb_peek() the data
of the queue followed by the unlink. It shouldn't need to check this
condition and tcp_read_skb() reads entire skbs so there is no need to
handle the 'offset!=0' case as we would see in tcp_read_sock().
Fixes: e5c6de5fa0258 ("bpf, sockmap: Incorrectly handling copied_seq")
Fixes: 04919bed948dc ("tcp: Introduce tcp_read_skb()")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20230926035300.135096-2-john.fastabend@gmail.com
|
|
On init we have sequence:
for_each_card_prelinks(card, i, dai_link) {
ret = snd_soc_add_pcm_runtime(card, dai_link);
ret = init_some_other_things(...);
if (ret)
goto probe_end:
for_each_card_rtds(card, rtd) {
ret = soc_init_pcm_runtime(card, rtd);
probe_end:
while on exit:
for_each_card_rtds(card, rtd)
snd_soc_link_exit(rtd);
If init_some_other_things() step fails due to error we end up with
not fully setup rtds and try to call snd_soc_link_exit on them, which
depending on contents on .link_exit handler, can end up dereferencing
NULL pointer.
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230929103243.705433-2-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When printing log related to component it is useful to know, to which
component it applies to.
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230929103243.705433-1-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This is unionized with the actual link flags, so they can of course be
set and they will be evaluated further down. If not we fail any LINKAT
that has to set option flags.
Fixes: cf30da90bc3a ("io_uring: add support for IORING_OP_LINKAT")
Cc: stable@vger.kernel.org
Reported-by: Thomas Leonard <talex5@gmail.com>
Link: https://github.com/axboe/liburing/issues/955
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
- Fix a panic regression on gen8_ggtt_insert_entries (Matthew Wilcox)
- Fix load issue due to reservation address in ggtt_reserve_guc_top (Javier Pello)
- Fix a possible deadlock with guc busyness worker (Umesh)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZRWMI1HmUYPGGylp@intel.com
|
|
The SGX EPC reclaimer (ksgxd) may reclaim the SECS EPC page for an
enclave and set secs.epc_page to NULL. The SECS page is used for EAUG
and ELDU in the SGX page fault handler. However, the NULL check for
secs.epc_page is only done for ELDU, not EAUG before being used.
Fix this by doing the same NULL check and reloading of the SECS page as
needed for both EAUG and ELDU.
The SECS page holds global enclave metadata. It can only be reclaimed
when there are no other enclave pages remaining. At that point,
virtually nothing can be done with the enclave until the SECS page is
paged back in.
An enclave can not run nor generate page faults without a resident SECS
page. But it is still possible for a #PF for a non-SECS page to race
with paging out the SECS page: when the last resident non-SECS page A
triggers a #PF in a non-resident page B, and then page A and the SECS
both are paged out before the #PF on B is handled.
Hitting this bug requires that race triggered with a #PF for EAUG.
Following is a trace when it happens.
BUG: kernel NULL pointer dereference, address: 0000000000000000
RIP: 0010:sgx_encl_eaug_page+0xc7/0x210
Call Trace:
? __kmem_cache_alloc_node+0x16a/0x440
? xa_load+0x6e/0xa0
sgx_vma_fault+0x119/0x230
__do_fault+0x36/0x140
do_fault+0x12f/0x400
__handle_mm_fault+0x728/0x1110
handle_mm_fault+0x105/0x310
do_user_addr_fault+0x1ee/0x750
? __this_cpu_preempt_check+0x13/0x20
exc_page_fault+0x76/0x180
asm_exc_page_fault+0x27/0x30
Fixes: 5a90d2c3f5ef ("x86/sgx: Support adding of pages to an initialized enclave")
Signed-off-by: Haitao Huang <haitao.huang@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Acked-by: Reinette Chatre <reinette.chatre@intel.com>
Cc:stable@vger.kernel.org
Link: https://lore.kernel.org/all/20230728051024.33063-1-haitao.huang%40linux.intel.com
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
Short summary of fixes pull:
* ivpu:
* Add PCI ids for Arrow Lake
* Fix memory corruption during IPC
* Avoid dmesg flooding
* 40xx: Wait for clock resource
* 40xx: Fix interrupt usage
* 40xx: Support caching when loading firmware
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230928081208.GA7881@linux-uq9g
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent
Pull irqchip fixes from Marc Zygnier:
- Fix QC PDC v3.2 support by working around broken firmware tables
- Fix rzg2l-irqc missing #interrupt-cells description in the DT binding
- Fix rzg2l-irqc interrupt masking
Link: https://lore.kernel.org/lkml/20230924094105.2361754-1-maz@kernel.org
|
|
During RCU-boost testing with the TREE03 rcutorture config, I found that
after a few hours, the machine locks up.
On tracing, I found that there is a live lock happening between 2 CPUs.
One CPU has an RT task running, while another CPU is being offlined
which also has an RT task running. During this offlining, all threads
are migrated. The migration thread is repeatedly scheduled to migrate
actively running tasks on the CPU being offlined. This results in a live
lock because select_fallback_rq() keeps picking the CPU that an RT task
is already running on only to get pushed back to the CPU being offlined.
It is anyway pointless to pick CPUs for pushing tasks to if they are
being offlined only to get migrated away to somewhere else. This could
also add unwanted latency to this task.
Fix these issues by not selecting CPUs in RT if they are not 'active'
for scheduling, using the cpu_active_mask. Other parts in core.c already
use cpu_active_mask to prevent tasks from being put on CPUs going
offline.
With this fix I ran the tests for days and could not reproduce the
hang. Without the patch, I hit it in a few hours.
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Paul E. McKenney <paulmck@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230923011409.3522762-1-joel@joelfernandes.org
|
|
Forget to reset ctx->password to NULL will lead to bug like double free
Cc: stable@vger.kernel.org
Cc: Willy Tarreau <w@1wt.eu>
Reviewed-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Quang Le <quanglex97@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A small set of device specific fixes, the most major one is for the
GXP driver which would probably have been confusing some callers with
returning the length rather than 0 on successful writes"
* tag 'spi-fix-v6.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: spi-gxp: BUG: Correct spi write return value
dt-bindings: spi: fsl-imx-cspi: Document missing entries
spi: cs42l43: Remove spurious pm_runtime_disable
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch fixes from Huacai Chen:
"Fix high_memory calculation and module loader errors with latest
binutils"
* tag 'loongarch-fixes-6.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: Add support for 64_PCREL relocation type
LoongArch: Add support for 32_PCREL relocation type
LoongArch: Define relocation types for ABI v2.10
LoongArch: numa: Fix high_memory calculation
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fix from Thomas Bogendoerfer:
- fix Alchemy build with MMC support disabled
* tag 'mips-fixes_6.6_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: Alchemy: only build mmc support helpers if au1xmmc is enabled
|
|
Fix a misspelling of "preceding".
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Bill O'Donnell <bodonnel@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
I hit this panic in testing:
[ 6235.500016] run fstests generic/464 at 2023-09-18 22:51:24
[ 6288.410761] BUG: kernel NULL pointer dereference, address: 0000000000000000
[ 6288.412174] #PF: supervisor read access in kernel mode
[ 6288.413160] #PF: error_code(0x0000) - not-present page
[ 6288.413992] PGD 0 P4D 0
[ 6288.414603] Oops: 0000 [#1] PREEMPT SMP PTI
[ 6288.415419] CPU: 0 PID: 340798 Comm: kworker/u18:8 Not tainted 6.6.0-rc1-gdcf620ceebac #95
[ 6288.416538] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-1.fc38 04/01/2014
[ 6288.417701] Workqueue: nfsiod rpc_async_release [sunrpc]
[ 6288.418676] RIP: 0010:nfs_inode_remove_request+0xc8/0x150 [nfs]
[ 6288.419836] Code: ff ff 48 8b 43 38 48 8b 7b 10 a8 04 74 5b 48 85 ff 74 56 48 8b 07 a9 00 00 08 00 74 58 48 8b 07 f6 c4 10 74 50 e8 c8 44 b3 d5 <48> 8b 00 f0 48 ff 88 30 ff ff ff 5b 5d 41 5c c3 cc cc cc cc 48 8b
[ 6288.422389] RSP: 0018:ffffbd618353bda8 EFLAGS: 00010246
[ 6288.423234] RAX: 0000000000000000 RBX: ffff9a29f9a25280 RCX: 0000000000000000
[ 6288.424351] RDX: ffff9a29f9a252b4 RSI: 000000000000000b RDI: ffffef41448e3840
[ 6288.425345] RBP: ffffef41448e3840 R08: 0000000000000038 R09: ffffffffffffffff
[ 6288.426334] R10: 0000000000033f80 R11: ffff9a2a7fffa000 R12: ffff9a29093f98c4
[ 6288.427353] R13: 0000000000000000 R14: ffff9a29230f62e0 R15: ffff9a29230f62d0
[ 6288.428358] FS: 0000000000000000(0000) GS:ffff9a2a77c00000(0000) knlGS:0000000000000000
[ 6288.429513] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 6288.430427] CR2: 0000000000000000 CR3: 0000000264748002 CR4: 0000000000770ef0
[ 6288.431553] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 6288.432715] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 6288.433698] PKRU: 55555554
[ 6288.434196] Call Trace:
[ 6288.434667] <TASK>
[ 6288.435132] ? __die+0x1f/0x70
[ 6288.435723] ? page_fault_oops+0x159/0x450
[ 6288.436389] ? try_to_wake_up+0x98/0x5d0
[ 6288.437044] ? do_user_addr_fault+0x65/0x660
[ 6288.437728] ? exc_page_fault+0x7a/0x180
[ 6288.438368] ? asm_exc_page_fault+0x22/0x30
[ 6288.439137] ? nfs_inode_remove_request+0xc8/0x150 [nfs]
[ 6288.440112] ? nfs_inode_remove_request+0xa0/0x150 [nfs]
[ 6288.440924] nfs_commit_release_pages+0x16e/0x340 [nfs]
[ 6288.441700] ? __pfx_call_transmit+0x10/0x10 [sunrpc]
[ 6288.442475] ? _raw_spin_lock_irqsave+0x23/0x50
[ 6288.443161] nfs_commit_release+0x15/0x40 [nfs]
[ 6288.443926] rpc_free_task+0x36/0x60 [sunrpc]
[ 6288.444741] rpc_async_release+0x29/0x40 [sunrpc]
[ 6288.445509] process_one_work+0x171/0x340
[ 6288.446135] worker_thread+0x277/0x3a0
[ 6288.446724] ? __pfx_worker_thread+0x10/0x10
[ 6288.447376] kthread+0xf0/0x120
[ 6288.447903] ? __pfx_kthread+0x10/0x10
[ 6288.448500] ret_from_fork+0x2d/0x50
[ 6288.449078] ? __pfx_kthread+0x10/0x10
[ 6288.449665] ret_from_fork_asm+0x1b/0x30
[ 6288.450283] </TASK>
[ 6288.450688] Modules linked in: rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace sunrpc nls_iso8859_1 nls_cp437 vfat fat 9p netfs ext4 kvm_intel crc16 mbcache jbd2 joydev kvm xfs irqbypass virtio_net pcspkr net_failover psmouse failover 9pnet_virtio cirrus drm_shmem_helper virtio_balloon drm_kms_helper button evdev drm loop dm_mod zram zsmalloc crct10dif_pclmul crc32_pclmul ghash_clmulni_intel sha512_ssse3 sha512_generic virtio_blk nvme aesni_intel crypto_simd cryptd nvme_core t10_pi i6300esb crc64_rocksoft_generic crc64_rocksoft crc64 virtio_pci virtio virtio_pci_legacy_dev virtio_pci_modern_dev virtio_ring serio_raw btrfs blake2b_generic libcrc32c crc32c_generic crc32c_intel xor raid6_pq autofs4
[ 6288.460211] CR2: 0000000000000000
[ 6288.460787] ---[ end trace 0000000000000000 ]---
[ 6288.461571] RIP: 0010:nfs_inode_remove_request+0xc8/0x150 [nfs]
[ 6288.462500] Code: ff ff 48 8b 43 38 48 8b 7b 10 a8 04 74 5b 48 85 ff 74 56 48 8b 07 a9 00 00 08 00 74 58 48 8b 07 f6 c4 10 74 50 e8 c8 44 b3 d5 <48> 8b 00 f0 48 ff 88 30 ff ff ff 5b 5d 41 5c c3 cc cc cc cc 48 8b
[ 6288.465136] RSP: 0018:ffffbd618353bda8 EFLAGS: 00010246
[ 6288.465963] RAX: 0000000000000000 RBX: ffff9a29f9a25280 RCX: 0000000000000000
[ 6288.467035] RDX: ffff9a29f9a252b4 RSI: 000000000000000b RDI: ffffef41448e3840
[ 6288.468093] RBP: ffffef41448e3840 R08: 0000000000000038 R09: ffffffffffffffff
[ 6288.469121] R10: 0000000000033f80 R11: ffff9a2a7fffa000 R12: ffff9a29093f98c4
[ 6288.470109] R13: 0000000000000000 R14: ffff9a29230f62e0 R15: ffff9a29230f62d0
[ 6288.471106] FS: 0000000000000000(0000) GS:ffff9a2a77c00000(0000) knlGS:0000000000000000
[ 6288.472216] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 6288.473059] CR2: 0000000000000000 CR3: 0000000264748002 CR4: 0000000000770ef0
[ 6288.474096] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 6288.475097] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 6288.476148] PKRU: 55555554
[ 6288.476665] note: kworker/u18:8[340798] exited with irqs disabled
Once we've released "req", it's not safe to dereference it anymore.
Decrement the nrequests counter before dropping the reference.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Tested-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
