summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-12-12HID: fix missing irq fieldBenjamin Tissoires
commit ba18a9314a94 ("Revert "HID: i2c-hid: Add support for ACPI GPIO interrupts"") removed the need for storing the irq in struct i2c_hid. But then commit de3c99488609 ("HID: i2c-hid: Disable IRQ before freeing buffers") forgot to update the location of the irq. Fix this by using the actual I2C client irq. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-12-12HID: i2c-hid: fix buildJiri Kosina
Add a forgotten include that I've by mistake omitted when resolving merge conflict in ead0687fe30 ("HID: i2c-hid: support regulator power on/off"). Fixes: ead0687fe30 ("HID: i2c-hid: support regulator power on/off") Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-12-12HID: i2c-hid: Disable IRQ before freeing buffersJoão Paulo Rechi Vita
The HID report buffers that are initially allocated on i2c_hid_probe() might not be big enough to hold the HID reports from a specific device, in which case they will be freed and new ones will be allocated in i2c_hid_start(), at point which the device's report size is known. But at this point ihid->irq is already running, and may call i2c_hid_get_input() which passes ihid->inbuf to i2c_master_recv(). Since this handler runs in a separate thread, ihid->inbuf may be freed at this very moment, and i2c_master_recv() will write on memory which may be already owned by a different part of the kernel, corrupting its data. This problem has been observed on an Asus UX360UA laptop which has an I2C touchpad, and results in a complete system freeze or an unusable slowness with a lof of "BUG: unable to handle kernel paging request at <address>" warnings. Enabling SLUB debugging shows a use-after-free warning on memory allocated in i2c_hid_alloc_buffers() and freed in i2c_hid_free_buffers(): ============================================================================= BUG kmalloc-64 (Not tainted): Poison overwritten ----------------------------------------------------------------------------- Disabling lock debugging due to kernel taint INFO: 0xffff880264083273-0xffff88026408329e. first byte 0x0 instead of 0x6b INFO: Allocated in i2c_hid_alloc_buffers+0x25/0xa0 [i2c_hid] age=35793 cpu=2 pid=430 ___slab_alloc+0x41e/0x460 __slab_alloc+0x20/0x40 __kmalloc+0x210/0x280 i2c_hid_alloc_buffers+0x25/0xa0 [i2c_hid] i2c_hid_probe+0x12f/0x5e0 [i2c_hid] i2c_device_probe+0x10a/0x1b0 driver_probe_device+0x220/0x4a0 __device_attach_driver+0x71/0xa0 bus_for_each_drv+0x67/0xb0 __device_attach+0xdc/0x170 device_initial_probe+0x13/0x20 bus_probe_device+0x92/0xa0 device_add+0x4aa/0x670 device_register+0x1a/0x20 i2c_new_device+0x18e/0x230 acpi_i2c_add_device+0x1a0/0x210 INFO: Freed in i2c_hid_free_buffers+0x16/0x60 [i2c_hid] age=7552 cpu=1 pid=1473 __slab_free+0x221/0x330 kfree+0x139/0x160 i2c_hid_free_buffers+0x16/0x60 [i2c_hid] i2c_hid_start+0x2a9/0x2df [i2c_hid] mt_probe+0x160/0x22e [hid_multitouch] hid_device_probe+0xd7/0x150 [hid] driver_probe_device+0x220/0x4a0 __driver_attach+0x84/0x90 bus_for_each_dev+0x6c/0xc0 driver_attach+0x1e/0x20 bus_add_driver+0x1c3/0x280 driver_register+0x60/0xe0 __hid_register_driver+0x53/0x90 [hid] 0xffffffffc004f01e do_one_initcall+0xb3/0x1f0 do_init_module+0x5f/0x1d0 INFO: Slab 0xffffea0009902080 objects=20 used=20 fp=0x (null) flags=0x17fff8000004080 INFO: Object 0xffff880264083260 @offset=4704 fp=0x (null) Bytes b4 ffff880264083250: 8d e6 fe ff 00 00 00 00 5a 5a 5a 5a 5a 5a 5a 5a ........ZZZZZZZZ Object ffff880264083260: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk Object ffff880264083270: 6b 6b 6b 00 00 00 00 00 00 00 00 00 00 00 00 00 kkk............. Object ffff880264083280: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ Object ffff880264083290: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ Redzone ffff8802640832a0: bb bb bb bb bb bb bb bb ........ Padding ffff8802640833e0: 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZ CPU: 1 PID: 1503 Comm: python3 Tainted: G B 4.4.21+ #10 Hardware name: ASUSTeK COMPUTER INC. UX360UA/UX360UA, BIOS UX360UA.200 05/05/2016 0000000000000086 00000000622d48a2 ffff88026061ba38 ffffffff813f6044 ffff880264082010 ffff880264083260 ffff88026061ba78 ffffffff811e8eab 0000000000000008 ffff880200000001 ffff88026408329f ffff88026a007700 Call Trace: [<ffffffff813f6044>] dump_stack+0x63/0x8f [<ffffffff811e8eab>] print_trailer+0x14b/0x1f0 [<ffffffff811e94c1>] check_bytes_and_report+0xc1/0x100 [<ffffffff811e96c4>] check_object+0x1c4/0x240 [<ffffffff81293fde>] ? ext4_htree_store_dirent+0x3e/0x120 [<ffffffff811e9b44>] alloc_debug_processing+0x104/0x180 [<ffffffff811eb7be>] ___slab_alloc+0x41e/0x460 [<ffffffff81293fde>] ? ext4_htree_store_dirent+0x3e/0x120 [<ffffffff8124590b>] ? __getblk_gfp+0x2b/0x60 [<ffffffff8129b969>] ? ext4_getblk+0xa9/0x190 [<ffffffff811eb820>] __slab_alloc+0x20/0x40 [<ffffffff811ed320>] __kmalloc+0x210/0x280 [<ffffffff81293fde>] ? ext4_htree_store_dirent+0x3e/0x120 [<ffffffff812c1602>] ? ext4fs_dirhash+0xc2/0x2a0 [<ffffffff81293fde>] ext4_htree_store_dirent+0x3e/0x120 [<ffffffff812a4f47>] htree_dirblock_to_tree+0x187/0x1b0 [<ffffffff812a5fd2>] ext4_htree_fill_tree+0xb2/0x2e0 [<ffffffff811ebb7a>] ? kmem_cache_alloc_trace+0x1fa/0x220 [<ffffffff81293e45>] ? ext4_readdir+0x775/0x8b0 [<ffffffff81293cb1>] ext4_readdir+0x5e1/0x8b0 [<ffffffff81221c82>] iterate_dir+0x92/0x120 [<ffffffff81222118>] SyS_getdents+0x98/0x110 [<ffffffff81221d10>] ? iterate_dir+0x120/0x120 [<ffffffff818157f2>] entry_SYSCALL_64_fastpath+0x16/0x71 FIX kmalloc-64: Restoring 0xffff880264083273-0xffff88026408329e=0x6b FIX kmalloc-64: Marking all objects used Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-12-12avr32: wire up pkey syscallsHans-Christian Noren Egtvedt
This patch wires up the new pkey_mprotect, pkey_alloc and pkey_free syscalls on AVR32.
2016-12-12AVR32-pio: Replace two seq_printf() calls by seq_puts() in pio_bank_show()Markus Elfring
Strings which did not contain data format specifications should be put into a sequence. Thus use the corresponding function "seq_puts". This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
2016-12-12AVR32-pio: Use seq_putc() in pio_bank_show()Markus Elfring
A single character (line break) should be put into a sequence. Thus use the corresponding function "seq_putc". This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
2016-12-12AVR32-clock: Combine nine seq_printf() calls into one call in clk_show()Markus Elfring
Some data were printed into a sequence by nine separate function calls. Print the same data by a single function call instead. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
2016-12-12AVR32-clock: Use seq_putc() in two functionsMarkus Elfring
A single character (line break) should be put into two sequences. Thus use the corresponding function "seq_putc". This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
2016-12-12s390/vmlogrdr: fix IUCV buffer allocationGerald Schaefer
The buffer for iucv_message_receive() needs to be below 2 GB. In __iucv_message_receive(), the buffer address is casted to an u32, which would result in either memory corruption or an addressing exception when using addresses >= 2 GB. Fix this by using GFP_DMA for the buffer allocation. Cc: stable@vger.kernel.org Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-12-12s390/crypto: unlock on error in prng_tdes_read()Dan Carpenter
We added some new locking but forgot to unlock on error. Fixes: 57127645d79d ("s390/zcrypt: Introduce new SHA-512 based Pseudo Random Generator.") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-12-12Merge tag 'kvm-arm-for-4.10' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/ARM updates for 4.10: - Support for the GICv3 ITS on 32bit platforms - A handful of timer and GIC emulation fixes - A PMU architecture fix
2016-12-11sparc: fix a building error reported by kbuildGonglei \(Arei\)
>> arch/sparc/include/asm/topology_64.h:44:44: error: implicit declaration of function 'cpu_data' [-Werror=implicit-function-declaration] #define topology_physical_package_id(cpu) (cpu_data(cpu).proc_id) ^ Let's include cpudata.h in topology_64.h. Cc: Sam Ravnborg <sam@ravnborg.org> Cc: David S. Miller <davem@davemloft.net> Cc: sparclinux@vger.kernel.org Suggested-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Gonglei <arei.gonglei@huawei.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-11sparc64: fix typo in pgd_clear()Kirill A. Shutemov
It really has to be pgdp, not pgd. It just happend to work since all callers have 'pgd' as an argument. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-11sparc64: restore irq in error paths in iommuDan Carpenter
There are some error paths where we should restore IRQs but we don't. Fixes: bb620c3d3925 ("sparc: Make sparc64 use scalable lib/iommu-common.c functions") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-11sparc: leon: Fix a retry loop in leon_init_timers()Dan Carpenter
The original code causes a static checker warning because it has a continue inside a do { } while (0); loop. In that context, a continue and a break are equivalent. The intent was to go back to the start of the loop so the continue was a bug. I've added a retry label at the start and changed the continue to a goto retry. Then I removed the do { } while (0) loop and pulled the code in one indent level. Fixes: 2791c1a43900 ("SPARC/LEON: added support for selecting Timer Core and Timer within core") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-11sparc64: make string buffers large enoughDan Carpenter
My static checker complains that if "lvl" is ULONG_MAX (this is 64 bit) then some of the strings will overflow. I don't know if that's possible but it seems simple enough to make the buffers slightly larger. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-11sparc64: move dereference after check for NULLDan Carpenter
We shouldn't dereference "iommu" until after we have checked that it is non-NULL. Fixes: f08978b0fdbf ("sparc64: Enable sun4v dma ops to use IOMMU v2 APIs") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-11sparc: kernel: use builtin_platform_driverGeliang Tang
Use builtin_platform_driver() helper to simplify the code. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-11sparc64:Support User Probes for sparcAllen Pais
Signed-off-by: Eric Saint Etienne <eric.saint.etienne@oracle.com> Signed-off-by: Allen Pais <allen.pais@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-11Revert "Btrfs: adjust len of writes if following a preallocated extent"Chris Mason
This is exposing an existing deadlock between fsync and AIO. Until we have the deadlock fixed, I'm pulling this one out. This reverts commit a23eaa875f0f1d89eb866b8c9860e78273ff5daf. Signed-off-by: Chris Mason <clm@fb.com>
2016-12-11i2c: fsl-lpi2c: read lpi2c fifo size in probe()Gao Pan
The lpi2c fifo size is a read only parameter resides Parameter Register. It's better to read lpi2c tx/rx fifo size in probe() other than just define a macro for it. Signed-off-by: Gao Pan <pandy.gao@nxp.com> Reviewed-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-12-11i2c: octeon: thunderx: Remove double-check after interruptJan Glauber
Commit 1bb1ff3e7c74 ("i2c: octeon: Improve performance if interrupt is early") added a double-check around the wait_event_timeout() condition. The performance problem that this commit tried to work-around could not be reproduced. It also makes the wait condition more complicated then it should be. Therefore remove the double-check. Signed-off-by: Jan Glauber <jglauber@cavium.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-12-11i2c: octeon: thunderx: TWSI software reset in recoveryJan Glauber
I've seen i2c recovery reporting long loops of: [ 1035.887818] i2c i2c-4: SCL is stuck low, exit recovery [ 1037.999748] i2c i2c-4: SCL is stuck low, exit recovery [ 1040.111694] i2c i2c-4: SCL is stuck low, exit recovery ... Add a TWSI software reset which clears the status and STA,STP,IFLG in SW_TWSI_EOP_TWSI_CTL. With this the recovery works fine and above message is not seen. Signed-off-by: Jan Glauber <jglauber@cavium.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-12-11i2c: cadence: Allow Cadence I2C to be selected for Cadence Xtensa CPUsJan Kotas
This patch allows Cadence I2C controller to be selected in systems using Cadence Xtensa processors. Signed-off-by: Jan Kotas <jank@cadence.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-12-11i2c: sh_mobile: Add per-Generation fallback bindingsSimon Horman
Add per-Generation fallback bindings for R-Car SoCs. This is in keeping with the compatibility string scheme is being adopted for drivers for Renesas SoCs. Also, improve readability by listing the rmobile fallback compatibility string after the more-specific compatibility strings they provide a fallback for. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-12-11i2c: rcar: Add per-Generation fallback bindingsSimon Horman
In the case of Renesas R-Car hardware we know that there are generations of SoCs, e.g. Gen 2 and Gen 3. But beyond that it's not clear what the relationship between IP blocks might be. For example, I believe that r8a7790 is older than r8a7791 but that doesn't imply that the latter is a descendant of the former or vice versa. We can, however, by examining the documentation and behaviour of the hardware at run-time observe that the current driver implementation appears to be compatible with the IP blocks on SoCs within a given generation. For the above reasons and convenience when enabling new SoCs a per-generation fallback compatibility string scheme is being adopted for drivers for Renesas SoCs. Also: * Deprecate renesas,i2c-rcar. It seems poorly named as it is only compatible with R-Car Gen 1. It also appears unused in mainline. * Add some text to describe per-SoC bindings Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-12-11fscrypt: Rename FS_WRITE_PATH_FL to FS_CTX_HAS_BOUNCE_BUFFER_FLDavid Gstir
... to better explain its purpose after introducing in-place encryption without bounce buffer. Signed-off-by: David Gstir <david@sigma-star.at> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2016-12-11fscrypt: Delay bounce page pool allocation until neededDavid Gstir
Since fscrypt users can now indicated if fscrypt_encrypt_page() should use a bounce page, we can delay the bounce page pool initialization util it is really needed. That is until fscrypt_operations has no FS_CFLG_OWN_PAGES flag set. Signed-off-by: David Gstir <david@sigma-star.at> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2016-12-11kbuild: fix scripts/adjust_autoksyms.sh* for the no modules caseNicolas Pitre
When CONFIG_TRIM_UNUSED_KSYMS=y and no modules are actually selected, the adjust_autoksyms.sh script fails with: sed: can't read .tmp_versions/*.mod: No such file or directory Let's cope with that case gracefully. Signed-off-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Michal Marek <mmarek@suse.com>
2016-12-11fscrypt: Cleanup page locking requirements for fscrypt_{decrypt,encrypt}_page()David Gstir
Rename the FS_CFLG_INPLACE_ENCRYPTION flag to FS_CFLG_OWN_PAGES which, when set, indicates that the fs uses pages under its own control as opposed to writeback pages which require locking and a bounce buffer for encryption. Signed-off-by: David Gstir <david@sigma-star.at> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2016-12-11fscrypt: Cleanup fscrypt_{decrypt,encrypt}_page()David Gstir
- Improve documentation - Add BUG_ON(len == 0) to avoid accidental switch of offs and len parameters - Improve variable names for readability Signed-off-by: David Gstir <david@sigma-star.at> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2016-12-11fscrypt: Never allocate fscrypt_ctx on in-place encryptionDavid Gstir
In case of in-place encryption fscrypt_ctx was allocated but never released. Since we don't need it for in-place encryption, we skip allocating it. Fixes: 1c7dcf69eea3 ("fscrypt: Add in-place encryption mode") Signed-off-by: David Gstir <david@sigma-star.at> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2016-12-11fscrypt: Use correct index in decrypt path.David Gstir
Actually use the fs-provided index instead of always using page->index which is only set for page-cache pages. Fixes: 9c4bb8a3a9b4 ("fscrypt: Let fs select encryption index/tweak") Signed-off-by: David Gstir <david@sigma-star.at> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2016-12-11fscrypt: move the policy flags and encryption mode definitions to uapi headerTheodore Ts'o
These constants are part of the UAPI, so they belong in include/uapi/linux/fs.h instead of include/linux/fscrypto.h Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Eric Biggers <ebiggers@google.com>
2016-12-11fscrypt: move non-public structures and constants to fscrypt_private.hTheodore Ts'o
Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Eric Biggers <ebiggers@google.com>
2016-12-11fscrypt: unexport fscrypt_initialize()Theodore Ts'o
The fscrypt_initalize() function isn't used outside fs/crypto, so there's no point making it be an exported symbol. Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Eric Biggers <ebiggers@google.com>
2016-12-11fscrypt: rename get_crypt_info() to fscrypt_get_crypt_info()Theodore Ts'o
To avoid namespace collisions, rename get_crypt_info() to fscrypt_get_crypt_info(). The function is only used inside the fs/crypto directory, so declare it in the new header file, fscrypt_private.h. Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Eric Biggers <ebiggers@google.com>
2016-12-11fscrypto: move ioctl processing more fully into common codeEric Biggers
Multiple bugs were recently fixed in the "set encryption policy" ioctl. To make it clear that fscrypt_process_policy() and fscrypt_get_policy() implement ioctls and therefore their implementations must take standard security and correctness precautions, rename them to fscrypt_ioctl_set_policy() and fscrypt_ioctl_get_policy(). Make the latter take in a struct file * to make it consistent with the former. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2016-12-11fscrypto: remove unneeded Kconfig dependenciesEric Biggers
SHA256 and ENCRYPTED_KEYS are not needed. CTR shouldn't be needed either, but I left it for now because it was intentionally added by commit 71dea01ea2ed ("ext4 crypto: require CONFIG_CRYPTO_CTR if ext4 encryption is enabled"). So it sounds like there may be a dependency problem elsewhere, which I have not been able to identify specifically, that must be solved before CTR can be removed. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2016-12-11MAINTAINERS: fscrypto: recommend linux-fsdevel for fscrypto patchesEric Biggers
The filesystem level encryption support, currently used by ext4 and f2fs and proposed for ubifs, does not yet have a dedicated mailing list. Since no mailing lists were specified in MAINTAINERS, get_maintainer.pl only recommended to send patches directly to the maintainers and to linux-kernel. This patch adds linux-fsdevel as the preferred mailing list for fscrypto patches for the time being. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2016-12-11xconfig: fix missing suboption and help panels on first runBoris Barbulovski
qconfig initial slider sizes fix. On first `make xconfig`, suboption and help panels were hidden. Now we properly detect the first run, and show those panels. Reported-by: Jason Vas Dias <jason.vas.dias@gmail.com> Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Michal Marek <mmarek@suse.com>
2016-12-11xconfig: fix 'Show Debug' functionalityBoris Barbulovski
xconfig - Fix missing 'Show Debug' functionality. xconfig Help mentions 'Show Debug Info' but it was missing from any menu. * Add 'Show debug' menu to the main menu. * Properly load showDebug settings. Reported-by: Jason Vas Dias <jason.vas.dias@gmail.com> Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Michal Marek <mmarek@suse.com>
2016-12-11dma-buf: Extract dma-buf.rstDaniel Vetter
Just prep work to polish and consolidate all the dma-buf related documenation. Unfortunately I didn't discover a way to both integrate this new file into the overall toc while keeping it at the current place. Work around that by moving it into the overall driver-api/index.rst. Cc: linux-doc@vger.kernel.org Cc: Jonathan Corbet <corbet@lwn.net> Cc: Sumit Semwal <sumit.semwal@linaro.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-12-11IB/hfi1: Define platform_config_table_limits onceBart Van Assche
Defining static data structures in a header file is wrong because this causes the data structure to be instantiated once in every .c file it is included in. Hence move the definition of a static array from a header file into the only .c file in which it is used. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Dennis Dalessandro <dennis.dalessandro@intel.com> Cc: Dean Luick <dean.luick@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-12-11IB/hfi1: constify mmu_notifier_ops structureBhumika Goyal
Declare the structure mmu_notifier_ops as const as it is only stored in the ops field of a mmu_notifier structure. The ops field is of type const struct mmu_notifier_ops *, so mmu_notifier_ops structures having this property can be declared as const. Done using coccinelle: @r1 disable optional_qualifier @ identifier i; position p; @@ static struct mmu_notifier_ops i@p = {...}; @ok1@ identifier r1.i; position p; struct mmu_rb_handler handler; @@ handler.mn.ops=&i@p @bad@ position p!={r1.p,ok1.p}; identifier r1.i; @@ i@p @depends on !bad disable optional_qualifier@ identifier r1.i; @@ static +const struct mmu_notifier_ops i={...}; @depends on !bad disable optional_qualifier@ identifier r1.i; @@ +const struct mmu_notifier_ops i; File size before: text data bss dec hex filename 3566 72 16 3654 e46 drivers/infiniband/hw/hfi1/mmu_rb.o File size after: text data bss dec hex filename 3658 0 16 3674 e5a drivers/infiniband/hw/hfi1/mmu_rb.o Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-12-11IB/rdmavt, IB/hfi1, IB/qib: Add inlines for mtu divisionMike Marciniszyn
Add rvt_div_round_up_mtu() and rvt_div_mtu() routines to do the computation based on the pmtu and the log_pmtu. Change divides in qib, hfi1 to use the new inlines. Reviewed-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-12-11IB/hfi1,IB/qib: use rvt swqe mr deref helperMike Marciniszyn
Convert to use new swqe put routine. Reviewed-by: Brian Welty <brian.welty@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-12-11IB/rdmavt: Add swqe mr deref helperMike Marciniszyn
Add a helper to release mr references held by an swqe. Reviewed-by: Brian Welty <brian.welty@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-12-11IB/hfi1: Avoid credit return allocation for cpu-less NUMA nodesHarish Chegondi
Do not allocate credit return base and DMA memory for NUMA nodes without CPUs. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Harish Chegondi <harish.chegondi@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-12-11IB/hfi1,IB/qib: Use new send completion helperMike Marciniszyn
Convert cq completion returns in both rdmavt drivers to use the new helper. Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
generated by cgit (git 2.34.1) at 2025-09-15 17:48:19 +0000