summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-09-27net: bcmgenet: use new api ethtool_{get|set}_link_ksettingsPhilippe Reynes
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-27Revert "net: ethernet: bcmgenet: use phydev from struct net_device"Florian Fainelli
This reverts commit 62469c76007e ("net: ethernet: bcmgenet: use phydev from struct net_device") because it causes GENETv1/2/3 adapters to expose the following behavior after an ifconfig down/up sequence: PING fainelli-linux (10.112.156.244): 56 data bytes 64 bytes from 10.112.156.244: seq=1 ttl=61 time=1.352 ms 64 bytes from 10.112.156.244: seq=1 ttl=61 time=1.472 ms (DUP!) 64 bytes from 10.112.156.244: seq=1 ttl=61 time=1.496 ms (DUP!) 64 bytes from 10.112.156.244: seq=1 ttl=61 time=1.517 ms (DUP!) 64 bytes from 10.112.156.244: seq=1 ttl=61 time=1.536 ms (DUP!) 64 bytes from 10.112.156.244: seq=1 ttl=61 time=1.557 ms (DUP!) 64 bytes from 10.112.156.244: seq=1 ttl=61 time=752.448 ms (DUP!) This was previously fixed by commit 5dbebbb44a6a ("net: bcmgenet: Software reset EPHY after power on") but the commit we are reverting was essentially making this previous commit void, here is why. Without commit 62469c76007e we would have the following scenario after an ifconfig down then up sequence: - bcmgenet_open() calls bcmgenet_power_up() to make sure the PHY is initialized *before* we get to initialize the UniMAC, this is critical to ensure the PHY is in a correct state, priv->phydev is valid, this code executes fine - second time from bcmgenet_mii_probe(), through the normal phy_init_hw() call (which arguably could be optimized out) Everything is fine in that case. With commit 62469c76007e, we would have the following scenario to happen after an ifconfig down then up sequence: - bcmgenet_close() calls phy_disonnect() which makes dev->phydev become NULL - when bcmgenet_open() executes again and calls bcmgenet_mii_reset() from bcmgenet_power_up() to initialize the internal PHY, the NULL check becomes true, so we do not reset the PHY, yet we keep going on and initialize the UniMAC, causing MAC activity to occur - we call bcmgenet_mii_reset() from bcmgenet_mii_probe(), but this is too late, the PHY is botched, and causes the above bogus pings/packets transmission/reception to occur Reported-by: Jaedon Shin <jaedon.shin@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-27Revert "net: ethernet: bcmgenet: use new api ethtool_{get|set}_link_ksettings"Philippe Reynes
This reverts commit 6b352ebccbcf ("net: ethernet: broadcom: bcmgenet: use new api ethtool_{get|set}_link_ksettings"). We needs to revert the commit 62469c76007e ("net: ethernet: bcmgenet: use phydev from struct net_device"), because this commit add a regression. As the commit 6b352ebccbcf ("net: ethernet: broadcom: bcmgenet: use new api ethtool_{get|set}_link_ksettings") depend on the first one, we also need to revert it first. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-27Revert "net: ethernet: bcmgenet: use phydev from struct net_device"Florian Fainelli
This reverts commit 62469c76007e ("net: ethernet: bcmgenet: use phydev from struct net_device") because it causes GENETv1/2/3 adapters to expose the following behavior after an ifconfig down/up sequence: PING fainelli-linux (10.112.156.244): 56 data bytes 64 bytes from 10.112.156.244: seq=1 ttl=61 time=1.352 ms 64 bytes from 10.112.156.244: seq=1 ttl=61 time=1.472 ms (DUP!) 64 bytes from 10.112.156.244: seq=1 ttl=61 time=1.496 ms (DUP!) 64 bytes from 10.112.156.244: seq=1 ttl=61 time=1.517 ms (DUP!) 64 bytes from 10.112.156.244: seq=1 ttl=61 time=1.536 ms (DUP!) 64 bytes from 10.112.156.244: seq=1 ttl=61 time=1.557 ms (DUP!) 64 bytes from 10.112.156.244: seq=1 ttl=61 time=752.448 ms (DUP!) This was previously fixed by commit 5dbebbb44a6a ("net: bcmgenet: Software reset EPHY after power on") but the commit we are reverting was essentially making this previous commit void, here is why. Without commit 62469c76007e we would have the following scenario after an ifconfig down then up sequence: - bcmgenet_open() calls bcmgenet_power_up() to make sure the PHY is initialized *before* we get to initialize the UniMAC, this is critical to ensure the PHY is in a correct state, priv->phydev is valid, this code executes fine - second time from bcmgenet_mii_probe(), through the normal phy_init_hw() call (which arguably could be optimized out) Everything is fine in that case. With commit 62469c76007e, we would have the following scenario to happen after an ifconfig down then up sequence: - bcmgenet_close() calls phy_disonnect() which makes dev->phydev become NULL - when bcmgenet_open() executes again and calls bcmgenet_mii_reset() from bcmgenet_power_up() to initialize the internal PHY, the NULL check becomes true, so we do not reset the PHY, yet we keep going on and initialize the UniMAC, causing MAC activity to occur - we call bcmgenet_mii_reset() from bcmgenet_mii_probe(), but this is too late, the PHY is botched, and causes the above bogus pings/packets transmission/reception to occur Reported-by: Jaedon Shin <jaedon.shin@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-27Merge branch 'fec-align'David S. Miller
Eric Nelson says: ==================== net: fec: updates to align IP header This patch series is the outcome of investigation into very high numbers of alignment faults on kernel 4.1.33 from the linux-fslc tree: https://github.com/freescale/linux-fslc/tree/4.1-1.0.x-imx The first two patches remove support for the receive accelerator (RACC) from the i.MX25 and i.MX27 SoCs which don't support the function. The third patch enables hardware alignment of the ethernet packet payload (and especially the IP header) to prevent alignment faults in the IP stack. Testing on i.MX6UL on the 4.1.33 kernel showed that this patch removed on the order of 70k alignment faults during a 100MiB transfer using wget. Testing on an i.MX6Q (SABRE Lite) board on net-next (4.8.0-rc7) showed a much more modest improvement from 10's of faults, and it's not clear why that's the case. ==================== Acked-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-27net: fec: align IP header in hardwareEric Nelson
The FEC receive accelerator (RACC) supports shifting the data payload of received packets by 16-bits, which aligns the payload (IP header) on a 4-byte boundary, which is, if not required, at least strongly suggested by the Linux networking layer. Without this patch, a huge number of alignment faults will be taken by the IP stack, as seen in /proc/cpu/alignment: ~/$ cat /proc/cpu/alignment User: 0 System: 72645 (inet_gro_receive+0x104/0x27c) Skipped: 0 Half: 0 Word: 0 DWord: 0 Multi: 72645 User faults: 3 (fixup+warn) This patch was suggested by Andrew Lunn in this message to linux-netdev: http://marc.info/?l=linux-arm-kernel&m=147465452108384&w=2 and adapted from a patch by Russell King from 2014: http://git.arm.linux.org.uk/cgit/linux-arm.git/commit/?id=70d8a8a Signed-off-by: Eric Nelson <eric@nelint.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-27net: fec: remove QUIRK_HAS_RACC from i.mx27Eric Nelson
According to the i.MX27 reference manual, this SoC does not have support for the receive accelerator (RACC) register at offset 0x1C4. http://cache.nxp.com/files/32bit/doc/ref_manual/MCIMX27RM.pdf Signed-off-by: Eric Nelson <eric@nelint.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-27net: fec: remove QUIRK_HAS_RACC from i.mx25Eric Nelson
According to the i.MX25 reference manual, this SoC does not have support for the receive accelerator (RACC) register at offset 0x1C4. http://www.nxp.com/files/dsp/doc/ref_manual/IMX25RM.pdf Signed-off-by: Eric Nelson <eric@nelint.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-27staging: media: lirc: Replace data type with pointer in sizeof()Namrata A Shettar
Replace data type with pointer of same type in sizeof() to resolve checkpatch issue. Signed-off-by: Namrata A Shettar <namrataashettar@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-27staging: media: lirc: Add space around binary operatorsNamrata A Shettar
Add space around binary operators to resolve checkpatch issue. Signed-off-by: Namrata A Shettar <namrataashettar@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-27staging:android:ion: Fix whitespace issueYannis Damigos
This patch fixes the following whitespace issue: CHECK: spaces preferred around that '*' (ctx:VxV) FILE: drivers/staging/android/ion/ion_of.c:91: + sizeof(struct ion_platform_heap)*num_heaps, Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-27staging:android:ion: Fix blank line issuesYannis Damigos
This patch fixes the following blank line issues: CHECK: Please don't use multiple blank lines CHECK: Please use a blank line after function/struct/union/enum declarations +} +RESERVEDMEM_OF_DECLARE(ion, "ion-region", rmem_ion_setup); Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-27staging:android:ion: Fix alignment issuesYannis Damigos
This patch fixes the following whitespace issues: CHECK: Alignment should match open parenthesis + pr_info("%s: id %d type %d name %s align %lx\n", __func__, + heap->id, heap->type, heap->name, heap->align); CHECK: Alignment should match open parenthesis +struct ion_platform_data *ion_parse_dt(struct platform_device *pdev, + struct ion_of_heap *compatible) CHECK: Alignment should match open parenthesis + heaps = devm_kzalloc(&pdev->dev, + sizeof(struct ion_platform_heap)*num_heaps, CHECK: Alignment should match open parenthesis + data = devm_kzalloc(&pdev->dev, sizeof(struct ion_platform_data), + GFP_KERNEL); CHECK: Alignment should match open parenthesis + heap_pdev = of_platform_device_create(node, heaps[i].name, + &pdev->dev); CHECK: Alignment should match open parenthesis + pr_debug("%s: heap %s base %pa size %pa dev %p\n", __func__, + heap->name, &rmem->base, &rmem->size, dev); CHECK: Alignment should match open parenthesis +static void rmem_ion_device_release(struct reserved_mem *rmem, + struct device *dev) Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-27staging:android:ion: Fix comparison with NULLYannis Damigos
This patch fixes the following comparison with NULL issues: CHECK: Comparison to NULL could be written "compatible[i].name" + for (i = 0; compatible[i].name != NULL; i++) { CHECK: Comparison to NULL could be written "!compatible[i].name" + if (compatible[i].name == NULL) Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-27staging: dgnc: introduce find_board_by_major()Daeseok Youn
It was used to get a board structure with dgnc_BoardsByMajor array. But this driver already has the array for managing initialized board as dgap_board[]. It can be used for searching the board structure by major number. Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-27staging: dgnc: remove useless variablesDaeseok Youn
The dgnc_major_serial_registered and dgnc_major_serial_registered do not need to use to check whether the tty driver is registered or not. These variables are used only in dgnc_cleanup_tty() function, This function will be called normally with initialized board structure. It means the dgnc_cleanup_tty() cannot be called with unregistered tty. Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-27staging: dgnc: rename dgnc_tty_uninit() to dgnc_cleanup_tty()Daeseok Youn
The dgnc_tty_uninit() doesn't match with dgnc_tty_init() at all. And also the dgnc_cleanup_tty() is only called for exiting the module. Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-27staging: dgnc: introduce the dgnc_free_irq()Daeseok Youn
The dgnc_free_irq() will free the requested IRQ from the dgnc_request_irq(). Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-27staging: dgnc: rename dgnc_finalize_board_init() to dgnc_request_irq()Daeseok Youn
The dgnc_finalize_board_init() function has only job for requesting the IRQ. It should be renamed to dgnc_request_irq() Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-27staging: dgnc: introduce the dgnc_tty_unregister()Daeseok Youn
The dgnc_tty_unregister() will be called when the dgnc_tty_register() is failed. Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-27staging: dgnc: move functions unrelated with dgnc_found_board()Daeseok Youn
The functions related with tty device initialization are needed to be moved from dgnc_found_board() to dgnc_init_one(). Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-27staging: dgnc: kfree for board structure in dgnc_found_board()Daeseok Youn
The board structure should be freed when any function was failed in dgnc_found_board(). And the board strucure will be stored into dgnc_board array when the dgnc_found_board() function has no error. Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-27staging: dgnc: missing NULL check for ioremap in dgnc_do_remap()Daeseok Youn
The ioremap() function can be failed, so it need to have error handling in dgnc_do_remap(). And also the return type of dgnc_do_remap() should be changed from "void" to "int" Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-27staging: dgnc: remove useless message bufferDaeseok Youn
There is a temporary message buffer for the boot message in dgnc_found_board() but the buffer was not used anywhere in dgnc driver. Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-27staging: dgnc: remove redundant initialization for channel arrayDaeseok Youn
The channel array in board_t was initialized in dgnc_found_board() with NULL. But the channel is going to initialize in dgnc_tty_init(). So the channel array doesn't need to set NULL for initailization. Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-27staging: media: lirc: Remove unnecessary blank linesNamrata A Shettar
Remove unneccessary blank lines to resolve checkpatch issue. Signed-off-by: Namrata A Shettar <namrataashettar@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-27staging: media: lirc: Convert 'unsigned' to 'unsigned int'Namrata A Shettar
Mention data type along with the variable to resolve checkpatch issue. Signed-off-by: Namrata A Shettar <namrataashettar@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-27staging: media: lirc: Replace data type with pointer of same typeNamrata A Shettar
Replace data type with pointer of same type in sizeof() to resolve checkpatch issue. Signed-off-by: Namrata A Shettar <namrataashettar@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-27staging: media: lirc: Add space around '*'Namrata A Shettar
Add space around '*' to resolve checkpatch issue. Signed-off-by: Namrata A Shettar <namrataashettar@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-27staging: media: lirc: Remove multiple blank linesNamrata A Shettar
Remove multiple blank lines to resolve checkpatch issue. Signed-off-by: Namrata A Shettar <namrataashettar@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-27staging: sm750fb: rename getChipType to sm750_get_chip_typeMoshe Green
Rename CamelCased function getChipType to sm750_get_chip_type (prefex with sm750 in order to make the context of the function clear). This issue was found by checkpatch.pl Signed-off-by: Moshe Green <mgmoshes@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-27staging: rtl8712: Remove unnecessary 'else'Namrata A Shettar
Remove unnecessary 'else' after 'return' to resolve checkpatch issue. Signed-off-by: Namrata A Shettar <namrataashettar@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-27Staging: android: fixed permissions style issueEric Salem
Fixed a coding style issue. Changed symbolic permissions to octal. Signed-off-by: Eric Salem <ericsalem@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-27staging: slicoss: cleaning up codestyle warningsGrygorii Maistrenko
This removes checkpatch.pl warnings: WARNING: Block comments should align the * on each line Signed-off-by: Grygorii Maistrenko <grygoriimkd@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-27Staging: most: aim-v4l2: constify v4l2_file_operations structuresBhumika Goyal
Check for v4l2_file_operations structures that are only stored in the fops field of video_device structures. As this field is constant, so v4l2_file_operations structures having this property can also be declared constant. Done using coccinelle: @r1 disable optional_qualifier @ identifier i; position p; @@ static struct v4l2_file_operations i@p = {...}; @ok1@ identifier r1.i; position p; struct video_device x; @@ x.fops=&i@p; @bad@ position p!={r1.p,ok1.p}; identifier r1.i; @@ i@p @depends on !bad disable optional_qualifier@ identifier r1.i; @@ static +const struct v4l2_file_operations i={...}; @depends on !bad disable optional_qualifier@ identifier r1.i; @@ +const struct v4l2_file_operations i; File size before: text data bss dec hex filename 5608 160 4 5772 168c drivers/staging/most/aim-v4l2/video.o File size after: text data bss dec hex filename 5696 96 4 5796 16a4 drivers/staging/most/aim-v4l2/video.o Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-27Staging: most: aim-sound: constify snd_pcm_ops structuresBhumika Goyal
Check for snd_pcm_ops structures that are only passed as the third argument to the function snd_pcm_set_ops. As this argument is constant, so snd_pcm_ops structures having this property can also be made constant. Done using coccinelle: @r1 disable optional_qualifier @ identifier i; position p; @@ static struct snd_pcm_ops i@p = {...}; @ok1@ identifier r1.i; position p; expression e1,e2; @@ snd_pcm_set_ops(e1,e2,&i@p) @bad@ position p!={r1.p,ok1.p}; identifier r1.i; @@ i@p @depends on !bad disable optional_qualifier@ identifier r1.i; @@ static +const struct snd_pcm_ops i={...}; @depends on !bad disable optional_qualifier@ identifier r1.i; @@ +const struct snd_pcm_ops i; File size before: text data bss dec hex filename 4963 192 16 5171 1433 drivers/staging/most/aim-sound/sound.o File size after: text data bss dec hex filename 5075 64 16 5155 1423 drivers/staging/most/aim-sound/sound.o Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-27staging: most: fix error return code in audio_probe_channel()Wei Yongjun
Fix to return a negative error code from the audio_set_hw_params() error handling case instead of 0, as done elsewhere in this function. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Andrey Shvetsov <andrey.shvetsov@k2l.de> Signed-off-by: Christian Gromm <christian.gromm@microchip.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-27staging: unisys: visorbus: Convert visorchannel_signalinsert() return valDavid Binder
Per Documentation/CodingStyle, function names that convey an action or an imperative command should return an integer. This commit converts the visorbus API function, visorchannel_signalinsert(), to returning integer values. All uses of this function are updated accordingly. Signed-off-by: David Binder <david.binder@unisys.com> Signed-off-by: David Kershner <david.kershner@unisys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-27staging: unisys: visorbus: Convert visorchannel_signalremove() return valDavid Binder
Per Documentation/CodingStyle, function names that convey an action or an imperative command should return an integer. This commit converts the visorbus API function, visorchannel_signalremove(), to returning integer values. All uses of this function are updated accordingly. Signed-off-by: David Binder <david.binder@unisys.com> Signed-off-by: David Kershner <david.kershner@unisys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-27staging: unisys: visorbus: Change support functions to integer return valsDavid Binder
Per Documentation/CodingStyle, function names that convey an action or an imperative command should return an integer value. This commit changes several functions and a macro, internal to visorchannel.c, to follow this paradigm. These changes will be necessary later on to change other functions in this file, which are part of the visorbus API, to return integer values in lieu of a boolean. Signed-off-by: David Binder <david.binder@unisys.com> Signed-off-by: David Kershner <david.kershner@unisys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-27staging: unisys: make MODULE_DESCRIPTIONs consistentJon Frisch
This patch ensures that consistent verbiage is used in the MODULE_DESCRIPTION text (reported by 'modinfo') for all of the Unisys s-Par drivers. Signed-off-by: Jon Frisch <jon.frisch@unisys.com> Signed-off-by: David Kershner <david.kershner@unisys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-27staging: unisys: remove version.hJon Frisch
This patch removes version.h and the last version.h include in visorchannel.c. Signed-off-by: Jon Frisch <jon.frisch@unisys.com> Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: David Kershner <david.kershner@unisys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-27staging: unisys: visornic: remove driver version from visornic_main.cJon Frisch
This patch removes the driver version from visornic_main.c Signed-off-by: Jon Frisch <jon.frisch@unisys.com> Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: David Kershner <david.kershner@unisys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-27staging: unisys: visorinput: remove driver version from visorinput.cJon Frisch
This patch removes the driver version and the version.h include from visorinput.c Signed-off-by: Jon Frisch <jon.frisch@unisys.com> Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: David Kershner <david.kershner@unisys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-27staging: unisys: visorbus: remove driver version from visorchipset.cJon Frisch
This patch removes the driver version and the version.h include from visorchipset.c Signed-off-by: Jon Frisch <jon.frisch@unisys.com> Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: David Kershner <david.kershner@unisys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-27staging: unisys: remove driver version from struct visor_driverJon Frisch
This patch removes the all instances of the driver version from struct visor_driver. This includes removing version, vertag (a human readable version string of the driver version) and version_attr from struct visor_driver. This resulted in removing the bus attributes and driver attributes which only contained the driver version. The utsname function is used to replace the driver version with the kernel version in bus_device_info_init(). Signed-off-by: Jon Frisch <jon.frisch@unisys.com> Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: David Kershner <david.kershner@unisys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-27staging: ks7010: Use __packed over __attribute__((packed))Matt Kilgore
This replaces uses of __attribute__((packed)) with __packed, which is recommended to be used over the direct __attribute__. This patch then includes <linux/compiler.h> as necessary to use __packed. Signed-off-by: Matthew Kilgore <mattkilgore12@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-27staging: ks7010: Fix warnings on printk() usageSabitha George
This patch fixes the following warnings on ks7010_sdio.c 1. printk() should include KERN_ facility level 2. Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... Signed-off-by: Sabitha George <sabitha.george@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-27staging: ks7010: ks_wlan_net: Use netdev_info instead of printkGeorgiana Rodica Chelu
Pass the net_device structure to print_hif_event function in order to use netdev_info instead of printk. Signed-off-by: Georgiana Rodica Chelu <georgiana.chelu93@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-27staging: ks7010: ks_wlan_net: Use netdev_ instead of printkGeorgiana Rodica Chelu
The checkpatch.pl script found the following warning: WARNING: printk() should include KERN_ facility level After adding the KERN_ facility level to printk(), the script showed another warning: WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... The warning is similar for KERN_ERR and KERN_DEBUG. In conclusion, use netdev_info(), netdev_err() or netdev_dbg() when there is a netdev device. Signed-off-by: Georgiana Rodica Chelu <georgiana.chelu93@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit (git 2.34.1) at 2025-09-14 17:17:02 +0000