summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-07-28net/mlx5: Verify Hardware supports requested ptp function on a given pinEran Ben Elisha
Fix a bug where driver did not verify Hardware pin capabilities for PTP functions. Fixes: ee7f12205abc ("net/mlx5e: Implement 1PPS support") Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Reviewed-by: Ariel Levkovich <lariel@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-07-28net/mlx5: Fix a bug of using ptp channel index as pin indexEran Ben Elisha
On PTP mlx5_ptp_enable(on=0) flow, driver mistakenly used channel index as pin index. After ptp patch marked in fixes tag was introduced, driver can freely call ptp_find_pin() as part of the .enable() callback. Fix driver mlx5_ptp_enable(on=0) flow to always use ptp_find_pin(). With that, Driver will use the correct pin index in mlx5_ptp_enable(on=0) flow. In addition, when initializing the pins, always set channel to zero. As all pins can be attached to all channels, let ptp_set_pinfunc() to move them between the channels. For stable branches, this fix to be applied only on kernels that includes both patches in fixes tag. Otherwise, mlx5_ptp_enable(on=0) will be stuck on pincfg_mux. Fixes: 62582a7ee783 ("ptp: Avoid deadlocks in the programmable pin code.") Fixes: ee7f12205abc ("net/mlx5e: Implement 1PPS support") Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Reviewed-by: Ariel Levkovich <lariel@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-07-28net/mlx5e: Fix missing cleanup of ethtool steering during rep rx cleanupMaor Dickman
The cited commit add initialization of ethtool steering during representor rx initializations without cleaning it up in representor rx cleanup, this may cause for stale ethtool flows to remain after moving back from switchdev mode to legacy mode. Fixed by calling ethtool steering cleanup during rep rx cleanup. Fixes: 6783e8b29f63 ("net/mlx5e: Init ethtool steering for representors") Signed-off-by: Maor Dickman <maord@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Vlad Buslov <vladbu@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-07-28net/mlx5e: Fix error path of device attachAya Levin
On failure to attach the netdev, fix the rollback by re-setting the device's state back to MLX5E_STATE_DESTROYING. Failing to attach doesn't stop statistics polling via .ndo_get_stats64. In this case, although the device is not attached, it falsely continues to query the firmware for counters. Setting the device's state back to MLX5E_STATE_DESTROYING prevents the firmware counters query. Fixes: 26e59d8077a3 ("net/mlx5e: Implement mlx5e interface attach/detach callbacks") Signed-off-by: Aya Levin <ayal@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-07-28net/mlx5: Fix forward to next namespaceMaor Gottlieb
The steering tree is as follow (nic RX as example): --------- |root_ns| --------- | -------------------------------- | | | ---------- ---------- --------- |p(prio)0| | p1 | | pn | ---------- ---------- --------- | | ---------------- --------------- |ns(e.g bypass)| |ns(e.g. lag) | ---------------- --------------- | | | ---- ---- ---- |p0| |p1| |pn| ---- ---- ---- | ---- |FT| ---- find_next_chained_ft(prio) returns the first flow table in the next priority. If prio is a parent of a flow table then it returns the first flow table in the next priority in the same namespace, else if prio is parent of namespace, then it should return the first flow table in the next namespace. Currently if the user requests to forward to next namespace, the code calls to find_next_chained_ft with the prio of the next namespace and not the prio of the namesapce itself. Fixes: 9254f8ed15b6 ("net/mlx5: Add support in forward to namespace") Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-07-28net/mlx5: E-switch, Destroy TSAR after reload interfaceParav Pandit
When eswitch offloads is enabled, TSAR is created before reloading the interfaces. However when eswitch offloads mode is disabled, TSAR is disabled before reloading the interfaces. To keep the eswitch enable/disable sequence as mirror, destroy TSAR after reloading the interfaces. Fixes: 1bd27b11c1df ("net/mlx5: Introduce E-switch QoS management") Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-07-28net/mlx5: E-switch, Destroy TSAR when fail to enable the modeParav Pandit
When either esw_legacy_enable() or esw_offloads_enable() fails, code missed to destroy the created TSAR. Hence, add the missing call to destroy the TSAR. Fixes: 610090ebce92 ("net/mlx5: E-switch, Initialize TSAR Qos hardware block before its user vports") Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-07-28Merge branch 'hns3-fixes'David S. Miller
Huazhong Tan says: ==================== net: hns3: fixes for -net There are some bugfixes for the HNS3 ethernet driver. patch#1 fixes a desc filling bug, patch#2 fixes a false TX timeout issue, and patch#3~#5 fixes some bugs related to VLAN and FD. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-28net: hns3: fix for VLAN config when reset failedGuojia Liao
When device is resetting or reset failed, firmware is unable to handle mailbox. VLAN should not be configured in this case. Fixes: fe4144d47eef ("net: hns3: sync VLAN filter entries when kill VLAN ID failed") Signed-off-by: Guojia Liao <liaoguojia@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-28net: hns3: fix aRFS FD rules leftover after add a user FD ruleGuojia Liao
When user had created a FD rule, all the aRFS rules should be clear up. HNS3 process flow as below: 1.get spin lock of fd_ruls_list 2.clear up all aRFS rules 3.release lock 4.get spin lock of fd_ruls_list 5.creat a rules 6.release lock; There is a short period of time between step 3 and step 4, which would creatting some new aRFS FD rules if driver was receiving packet. So refactor the fd_rule_lock to fix it. Fixes: 441228875706 ("net: hns3: refine the flow director handle") Signed-off-by: Guojia Liao <liaoguojia@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-28net: hns3: add reset check for VF updating port based VLANJian Shen
Currently hclgevf_update_port_base_vlan_info() may be called when VF is resetting, which may cause hns3_nic_net_open() being called twice unexpectedly. So fix it by adding a reset check for it, and extend critical region for rntl_lock in hclgevf_update_port_base_vlan_info(). Fixes: 92f11ea177cd ("net: hns3: fix set port based VLAN issue for VF") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-28net: hns3: fix a TX timeout issueYonglong Liu
When the queue depth and queue parameters are modified, there is a low probability that TX timeout occurs. The two operations cause the link to be down or up when the watchdog is still working. All queues are stopped when the link is down. After the carrier is on, all queues are woken up. If the watchdog detects the link between the carrier on and wakeup queues, a false TX timeout occurs. So fix this issue by modifying the sequence of carrier on and queue wakeup, which is symmetrical to the link down action. Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-28net: hns3: fix desc filling bug when skb is expanded or linearedYunsheng Lin
The linear and frag data part may be changed when the skb is expanded or lineared in skb_cow_head() or skb_checksum_help(), which is called by hns3_fill_skb_desc(), so the linear len return by skb_headlen() before the calling of hns3_fill_skb_desc() is unreliable. Move hns3_fill_skb_desc() before the calling of skb_headlen() to fix this bug. Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-28Merge tag 'asm-generic-fixes-5.8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic into master Pull asm-generic bugfix from Arnd Bergmann: "A single bugfix for a regression introduced through a typo in the v5.8 merge window, leading to incorrect data returned from inl() on some architectures" * tag 'asm-generic-fixes-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: io: Fix return type of _inb and _inl
2020-07-28Merge tag 'arm-fixes-5.8-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc into master Pull ARM SoC DT fixes from Arnd Bergmann: "These are the latest device tree fixes for Arm SoCs: - TI Keystone2 ethernet regressed after a driver change broke with incorrect phy-mode in a board's DT source. - A similar fix is needed for two i.MX boards that were missed in an earlier bugfix. - DT change for Armada 38x allowing to add the register needed to fix NETA lockup when repeatedly switching speed. - One fix on imx6qdl-icore pin muxing to get USB OTG_ID and SD card detect work correctly. - Two fixes for the Allwinner SoCs, one to relax the CMA allocation ranges that were failing on older SoCs and one to fix Cedrus on the H6" * tag 'arm-fixes-5.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: ARM: dts: keystone-k2g-evm: fix rgmii phy-mode for ksz9031 phy ARM: dts: armada-38x: fix NETA lockup when repeatedly switching speeds ARM: dts: imx6qdl-icore: Fix OTG_ID pin and sdcard detect ARM: dts: imx6sx-sabreauto: Fix the phy-mode on fec2 ARM: dts: imx6sx-sdb: Fix the phy-mode on fec2 arm64: dts: allwinner: h6: Fix Cedrus IOMMU usage ARM: dts sunxi: Relax a bit the CMA pool allocation range
2020-07-28i2c: slave: add sanity check when unregisteringWolfram Sang
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Alain Volmat <alain.volmat@st.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-07-28i2c: slave: improve sanity check when registeringWolfram Sang
Add check for ERR_PTR and simplify code while here. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Alain Volmat <alain.volmat@st.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-07-28block: Remove callback typedefs for blk_mq_opsDaniel Wagner
No need to define typedefs for the callbacks, because there is not a single user except blk_mq_ops. Signed-off-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-28block: Use non _rcu version of list functions for tag_set_listDaniel Wagner
tag_set_list is only accessed under the tag_set_lock lock. There is no need for using the _rcu list functions. The _rcu list function were introduced to allow read access to the tag_set_list protected under RCU, see 705cda97ee3a ("blk-mq: Make it safe to use RCU to iterate over blk_mq_tag_set.tag_list") and 05b79413946d ("Revert "blk-mq: don't handle TAG_SHARED in restart""). Those changes got reverted later but the cleanup commit missed a couple of places to undo the changes. Fixes: 97889f9ac24f ("blk-mq: remove synchronize_rcu() from blk_mq_del_queue_tag_set()" Signed-off-by: Daniel Wagner <dwagner@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Cc: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-28bus: fsl-mc: Add ACPI support for fsl-mcMakarand Pawagi
Add ACPI support in the fsl-mc driver. Driver parses MC DSDT table to extract memory and other resources. Interrupt (GIC ITS) information is extracted from the MADT table by drivers/irqchip/irq-gic-v3-its-fsl-mc-msi.c. IORT table is parsed to configure DMA. Signed-off-by: Makarand Pawagi <makarand.pawagi@nxp.com> Signed-off-by: Diana Craciun <diana.craciun@oss.nxp.com> Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Link: https://lore.kernel.org/r/20200619082013.13661-13-lorenzo.pieralisi@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2020-07-28bus/fsl-mc: Refactor the MSI domain creation in the DPRC driverDiana Craciun
The DPRC driver is not taking into account the msi-map property and assumes that the icid is the same as the stream ID. Although this assumption is correct, generalize the code to include a translation between icid and streamID. Furthermore do not just copy the MSI domain from parent (for child containers), but use the information provided by the msi-map property. If the msi-map property is missing from the device tree retain the old behaviour for backward compatibility ie the child DPRC objects inherit the MSI domain from the parent. Signed-off-by: Diana Craciun <diana.craciun@oss.nxp.com> Acked-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200619082013.13661-12-lorenzo.pieralisi@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2020-07-28of/irq: Make of_msi_map_rid() PCI bus agnosticLorenzo Pieralisi
There is nothing PCI bus specific in the of_msi_map_rid() implementation other than the requester ID tag for the input ID space. Rename requester ID to a more generic ID so that the translation code can be used by all busses that require input/output ID translations. No functional change intended. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Rob Herring <robh@kernel.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200619082013.13661-11-lorenzo.pieralisi@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2020-07-28of/irq: make of_msi_map_get_device_domain() bus agnosticDiana Craciun
of_msi_map_get_device_domain() is PCI specific but it need not be and can be easily changed to be bus agnostic in order to be used by other busses by adding an IRQ domain bus token as an input parameter. Signed-off-by: Diana Craciun <diana.craciun@oss.nxp.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Bjorn Helgaas <bhelgaas@google.com> # pci/msi.c Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200619082013.13661-10-lorenzo.pieralisi@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2020-07-28dt-bindings: arm: fsl: Add msi-map device-tree binding for fsl-mc busLaurentiu Tudor
The existing bindings cannot be used to specify the relationship between fsl-mc devices and GIC ITSes. Add a generic binding for mapping fsl-mc devices to GIC ITSes, using msi-map property. In addition, deprecate msi-parent property which no longer makes sense now that we support translating the MSIs. Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Signed-off-by: Diana Craciun <diana.craciun@oss.nxp.com> Reviewed-by: Rob Herring <robh@kernel.org> Cc: Rob Herring <robh+dt@kernel.org> Link: https://lore.kernel.org/r/20200619082013.13661-9-lorenzo.pieralisi@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2020-07-28of/device: Add input id to of_dma_configure()Lorenzo Pieralisi
Devices sitting on proprietary busses have a device ID space that is owned by the respective bus and related firmware bindings. In order to let the generic OF layer handle the input translations to an IOMMU id, for such busses the current of_dma_configure() interface should be extended in order to allow the bus layer to provide the device input id parameter - that is retrieved/assigned in bus specific code and firmware. Augment of_dma_configure() to add an optional input_id parameter, leaving current functionality unchanged. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Rob Herring <robh@kernel.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Laurentiu Tudor <laurentiu.tudor@nxp.com> Link: https://lore.kernel.org/r/20200619082013.13661-8-lorenzo.pieralisi@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2020-07-28of/iommu: Make of_map_rid() PCI agnosticLorenzo Pieralisi
There is nothing PCI specific (other than the RID - requester ID) in the of_map_rid() implementation, so the same function can be reused for input/output IDs mapping for other busses just as well. Rename the RID instances/names to a generic "id" tag. No functionality change intended. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Joerg Roedel <jroedel@suse.de> Cc: Rob Herring <robh+dt@kernel.org> Cc: Joerg Roedel <joro@8bytes.org> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200619082013.13661-7-lorenzo.pieralisi@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2020-07-28ACPI/IORT: Add an input ID to acpi_dma_configure()Lorenzo Pieralisi
Some HW devices are created as child devices of proprietary busses, that have a bus specific policy defining how the child devices wires representing the devices ID are translated into IOMMU and IRQ controllers device IDs. Current IORT code provides translations for: - PCI devices, where the device ID is well identified at bus level as the requester ID (RID) - Platform devices that are endpoint devices where the device ID is retrieved from the ACPI object IORT mappings (Named components single mappings). A platform device is represented in IORT as a named component node For devices that are child devices of proprietary busses the IORT firmware represents the bus node as a named component node in IORT and it is up to that named component node to define in/out bus specific ID translations for the bus child devices that are allocated and created in a bus specific manner. In order to make IORT ID translations available for proprietary bus child devices, the current ACPI (and IORT) code must be augmented to provide an additional ID parameter to acpi_dma_configure() representing the child devices input ID. This ID is bus specific and it is retrieved in bus specific code. By adding an ID parameter to acpi_dma_configure(), the IORT code can map the child device ID to an IOMMU stream ID through the IORT named component representing the bus in/out ID mappings. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Hanjun Guo <guohanjun@huawei.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Robin Murphy <robin.murphy@arm.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Link: https://lore.kernel.org/r/20200619082013.13661-6-lorenzo.pieralisi@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2020-07-28ACPI/IORT: Remove useless PCI bus walkLorenzo Pieralisi
The PCI bus domain number (used in the iort_match_node_callback() - pci_domain_nr() call) is cascaded through the PCI bus hierarchy at PCI bus enumeration time, therefore there is no need in iort_find_dev_node() to walk the PCI bus upwards to grab the root bus to be passed to iort_scan_node(), the device->bus PCI bus pointer will do. Remove this useless code. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Hanjun Guo <guohanjun@huawei.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Robin Murphy <robin.murphy@arm.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Link: https://lore.kernel.org/r/20200619082013.13661-5-lorenzo.pieralisi@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2020-07-28ACPI/IORT: Make iort_msi_map_rid() PCI agnosticLorenzo Pieralisi
There is nothing PCI specific in iort_msi_map_rid(). Rename the function using a bus protocol agnostic name, iort_msi_map_id(), and convert current callers to it. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Will Deacon <will@kernel.org> Cc: Hanjun Guo <guohanjun@huawei.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Robin Murphy <robin.murphy@arm.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Link: https://lore.kernel.org/r/20200619082013.13661-4-lorenzo.pieralisi@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2020-07-28ACPI/IORT: Make iort_get_device_domain IRQ domain agnosticLorenzo Pieralisi
iort_get_device_domain() is PCI specific but it need not be, since it can be used to retrieve IRQ domain nexus of any kind by adding an irq_domain_bus_token input to it. Make it PCI agnostic by also renaming the requestor ID input to a more generic ID name. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> # pci/msi.c Cc: Will Deacon <will@kernel.org> Cc: Hanjun Guo <guohanjun@huawei.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Robin Murphy <robin.murphy@arm.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Link: https://lore.kernel.org/r/20200619082013.13661-3-lorenzo.pieralisi@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2020-07-28ACPI/IORT: Make iort_match_node_callback walk the ACPI namespace for NCLorenzo Pieralisi
When the iort_match_node_callback is invoked for a named component the match should be executed upon a device with an ACPI companion. For devices with no ACPI companion set-up the ACPI device tree must be walked in order to find the first parent node with a companion set and check the parent node against the named component entry to check whether there is a match and therefore an IORT node describing the in/out ID translation for the device has been found. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Hanjun Guo <guohanjun@huawei.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Robin Murphy <robin.murphy@arm.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Link: https://lore.kernel.org/r/20200619082013.13661-2-lorenzo.pieralisi@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2020-07-28perf/x86/rapl: Add Hygon Fam18h RAPL supportPu Wen
Hygon Family 18h(Dhyana) support RAPL in bit 14 of CPUID 0x80000007 EDX, and has MSRs RAPL_PWR_UNIT/CORE_ENERGY_STAT/PKG_ENERGY_STAT. So add Hygon Dhyana Family 18h support for RAPL. The output is available via the energy-pkg pseudo event: $ perf stat -a -I 1000 --per-socket -e power/energy-pkg/ [ mingo: Tidied up the initializers. ] Signed-off-by: Pu Wen <puwen@hygon.cn> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/20200720082205.1307-1-puwen@hygon.cn
2020-07-28sched: Remove duplicated tick_nohz_full_enabled() checkMiaohe Lin
In sched_update_tick_dependency() there's two calls that check whether nohz_full is enabled: tick_nohz_full_cpu() does it implicitly, while there's also an explicit call to tick_nohz_full_enabled(). Remove the duplicated, open coded check. [ mingo: Amended the changelog. ] Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/1595935075-14223-1-git-send-email-linmiaohe@huawei.com
2020-07-28kprobes: Remove unnecessary module_mutex locking from kprobe_optimizer()Masami Hiramatsu
Since we already lock both kprobe_mutex and text_mutex in the optimizer, text will not be changed and the module unloading will be stopped inside kprobes_module_callback(). The mutex_lock() has originally been introduced to avoid conflict with text modification, at that point we didn't hold text_mutex. But after: f1c6ece23729 ("kprobes: Fix potential deadlock in kprobe_optimizer()") We started holding the text_mutex and don't need the modules mutex anyway. So remove the module_mutex locking. [ mingo: Amended the changelog. ] Suggested-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Link: https://lore.kernel.org/r/20200728163400.e00b09c594763349f99ce6cb@kernel.org
2020-07-28Merge tag 'v5.8-rc7' into perf/core, to pick up fixesIngo Molnar
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2020-07-28lockdep: Move list.h inclusion into lockdep.hHerbert Xu
Currently lockdep_types.h includes list.h without actually using any of its macros or functions. All it needs are the type definitions which were moved into types.h long ago. This potentially causes inclusion loops because both are included by many core header files. This patch moves the list.h inclusion into lockdep.h. Note that we could probably remove it completely but that could potentially result in compile failures should any end users not include list.h directly and also be unlucky enough to not get list.h via some other header file. Reported-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Petr Mladek <pmladek@suse.com> Link: https://lkml.kernel.org/r/20200716063649.GA23065@gondor.apana.org.au
2020-07-28ALSA: hda/hdmi: Fix keep_power assignment for non-component devicesTakashi Iwai
It's been reported that, when neither nouveau nor Nvidia graphics driver is used, the screen starts flickering. And, after comparing between the working case (stable 4.4.x) and the broken case, it turned out that the problem comes from the audio component binding. The Nvidia and AMD audio binding code clears the bus->keep_power flag whenever snd_hdac_acomp_init() succeeds. But this doesn't mean that the component is actually bound, but it merely indicates that it's ready for binding. So, when both nouveau and Nvidia are blacklisted or not ready, the driver keeps running without the audio component but also with bus->keep_power = false. This made the driver runtime PM kicked in and powering down when unused, which results in flickering in the graphics side, as it seems. For fixing the bug, this patch moves the bus->keep_power flag change into generic_acomp_notifier_set() that is the function called from the master_bind callback of component ops; i.e. it's guaranteed that the binding succeeded. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=208609 Fixes: 5a858e79c911 ("ALSA: hda - Disable audio component for legacy Nvidia HDMI codecs") Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200728082033.23933-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-07-28KVM: arm64: Don't inherit exec permission across page-table levelsWill Deacon
If a stage-2 page-table contains an executable, read-only mapping at the pte level (e.g. due to dirty logging being enabled), a subsequent write fault to the same page which tries to install a larger block mapping (e.g. due to dirty logging having been disabled) will erroneously inherit the exec permission and consequently skip I-cache invalidation for the rest of the block. Ensure that exec permission is only inherited by write faults when the new mapping is of the same size as the existing one. A subsequent instruction abort will result in I-cache invalidation for the entire block mapping. Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Tested-by: Quentin Perret <qperret@google.com> Reviewed-by: Quentin Perret <qperret@google.com> Cc: Marc Zyngier <maz@kernel.org> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200723101714.15873-1-will@kernel.org
2020-07-28KVM: arm64: Prevent vcpu_has_ptrauth from generating OOL functionsMarc Zyngier
So far, vcpu_has_ptrauth() is implemented in terms of system_supports_*_auth() calls, which are declared "inline". In some specific conditions (clang and SCS), the "inline" very much turns into an "out of line", which leads to a fireworks when this predicate is evaluated on a non-VHE system (right at the beginning of __hyp_handle_ptrauth). Instead, make sure vcpu_has_ptrauth gets expanded inline by directly using the cpus_have_final_cap() helpers, which are __always_inline, generate much better code, and are the only thing that make sense when running at EL2 on a nVHE system. Fixes: 29eb5a3c57f7 ("KVM: arm64: Handle PtrAuth traps early") Reported-by: Nathan Chancellor <natechancellor@gmail.com> Reported-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Tested-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Link: https://lore.kernel.org/r/20200722162231.3689767-1-maz@kernel.org
2020-07-28xfrm: esp6: fix the location of the transport header with encapsulationSabrina Dubroca
commit 17175d1a27c6 ("xfrm: esp6: fix encapsulation header offset computation") changed esp6_input_done2 to correctly find the size of the IPv6 header that precedes the TCP/UDP encapsulation header, but didn't adjust the final call to skb_set_transport_header, which I assumed was correct in using skb_network_header_len. Xiumei Mu reported that when we create xfrm states that include port numbers in the selector, traffic from the user sockets is dropped. It turns out that we get a state mismatch in __xfrm_policy_check, because we end up trying to compare the encapsulation header's ports with the selector that's based on user traffic ports. Fixes: 0146dca70b87 ("xfrm: add support for UDPv6 encapsulation of ESP") Fixes: 26333c37fc28 ("xfrm: add IPv6 support for espintcp") Reported-by: Xiumei Mu <xmu@redhat.com> Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2020-07-27Merge tag 'sh-for-5.8-part2' of git://git.libc.org/linux-sh into masterLinus Torvalds
Pull arch/sh fixes from Rich Felker: "Two last-minute fixes: one is for a boot regression (mmu code broken) and the other fixes a long-standing broken syscall number bounds check" * tag 'sh-for-5.8-part2' of git://git.libc.org/linux-sh: sh: Fix validation of system call number sh/tlb: Fix PGTABLE_LEVELS > 2
2020-07-27sched: Fix a typo in a comment王文虎
Change the comment typo: "direcly" -> "directly". Signed-off-by: Wang Wenhu <wenhu.wang@vivo.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/AAcAXwBTDSpsKN-5iyIOtaqk.1.1595857191899.Hmail.wenhu.wang@vivo.com
2020-07-27fix a braino in cmsghdr_from_user_compat_to_kern()Al Viro
commit 547ce4cfb34c ("switch cmsghdr_from_user_compat_to_kern() to copy_from_user()") missed one of the places where ucmlen should've been replaced with cmsg.cmsg_len, now that we are fetching the entire struct rather than doing it field-by-field. As the result, compat sendmsg() with several different-sized cmsg attached started to fail with EINVAL. Trivial to fix, fortunately. Fixes: 547ce4cfb34c ("switch cmsghdr_from_user_compat_to_kern() to copy_from_user()") Reported-by: Nick Bowler <nbowler@draconx.ca> Tested-by: Nick Bowler <nbowler@draconx.ca> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-27sh: Fix validation of system call numberMichael Karcher
The slow path for traced system call entries accessed a wrong memory location to get the number of the maximum allowed system call number. Renumber the numbered "local" label for the correct location to avoid collisions with actual local labels. Signed-off-by: Michael Karcher <kernel@mkarcher.dialup.fu-berlin.de> Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Fixes: f3a8308864f920d2 ("sh: Add a few missing irqflags tracing markers.") Signed-off-by: Rich Felker <dalias@libc.org>
2020-07-27sh/tlb: Fix PGTABLE_LEVELS > 2Peter Zijlstra
Geert reported that his SH7722-based Migo-R board failed to boot after commit: c5b27a889da9 ("sh/tlb: Convert SH to generic mmu_gather") That commit fell victim to copying the wrong pattern -- __pmd_free_tlb() used to be implemented with pmd_free(). Fixes: c5b27a889da9 ("sh/tlb: Convert SH to generic mmu_gather") Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Rich Felker <dalias@libc.org>
2020-07-27drm: hold gem reference until object is no longer accessedSteve Cohen
A use-after-free in drm_gem_open_ioctl can happen if the GEM object handle is closed between the idr lookup and retrieving the size from said object since a local reference is not being held at that point. Hold the local reference while the object can still be accessed to fix this and plug the potential security hole. Signed-off-by: Steve Cohen <cohens@codeaurora.org> Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/1595284250-31580-1-git-send-email-cohens@codeaurora.org
2020-07-27Merge branch 'selftests-net-Fix-clang-warnings-on-powerpc'David S. Miller
Tanner Love says: ==================== selftests/net: Fix clang warnings on powerpc This is essentially a v2 of http://patchwork.ozlabs.org/project/netdev/patch/20200724181757.2331172-1-tannerlove.kernel@gmail.com/, but it has been split up in order to have only one "Fixes" tag per patch. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-27selftests/net: tcp_mmap: fix clang warning for target arch PowerPCTanner Love
When size_t maps to unsigned int (e.g. on 32-bit powerpc), then the comparison with 1<<35 is always true. Clang 9 threw: warning: result of comparison of constant 34359738368 with \ expression of type 'size_t' (aka 'unsigned int') is always true \ [-Wtautological-constant-out-of-range-compare] while (total < FILE_SZ) { Tested: make -C tools/testing/selftests TARGETS="net" run_tests Fixes: 192dc405f308 ("selftests: net: add tcp_mmap program") Signed-off-by: Tanner Love <tannerlove@google.com> Acked-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-27selftests/net: so_txtime: fix clang issues for target arch PowerPCTanner Love
On powerpcle, int64_t maps to long long. Clang 9 threw: warning: absolute value function 'labs' given an argument of type \ 'long long' but has parameter of type 'long' which may cause \ truncation of value [-Wabsolute-value] if (labs(tstop - texpect) > cfg_variance_us) Tested: make -C tools/testing/selftests TARGETS="net" run_tests Fixes: af5136f95045 ("selftests/net: SO_TXTIME with ETF and FQ") Signed-off-by: Tanner Love <tannerlove@google.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-27selftests/net: psock_fanout: fix clang issues for target arch PowerPCTanner Love
Clang 9 threw: warning: format specifies type 'unsigned short' but the argument has \ type 'int' [-Wformat] typeflags, PORT_BASE, PORT_BASE + port_off); Tested: make -C tools/testing/selftests TARGETS="net" run_tests Fixes: 77f65ebdca50 ("packet: packet fanout rollover during socket overload") Signed-off-by: Tanner Love <tannerlove@google.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-12 04:00:25 +0000