summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-07-20net: hsr: check for return value of skb_put_padto()Murali Karicheri
skb_put_padto() can fail. So check for return type and return NULL for skb. Caller checks for skb and acts correctly if it is NULL. Fixes: 6d6148bc78d2 ("net: hsr: fix incorrect lsdu size in the tag of HSR frames for small frames") Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-20Documentation: bareudp: update iproute2 sample commandsGuillaume Nault
bareudp.rst was written before iproute2 gained support for this new type of tunnel. Therefore, the sample command lines didn't match the final iproute2 implementation. Signed-off-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-20mlxsw: destroy workqueue when trap_register in mlxsw_emad_initLiu Jian
When mlxsw_core_trap_register fails in mlxsw_emad_init, destroy_workqueue() shouled be called to destroy mlxsw_core->emad_wq. Fixes: d965465b60ba ("mlxsw: core: Fix possible deadlock") Signed-off-by: Liu Jian <liujian56@huawei.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-20dpaa_eth: Fix one possible memleak in dpaa_eth_probeLiu Jian
When dma_coerce_mask_and_coherent() fails, the alloced netdev need to be freed. Fixes: 060ad66f9795 ("dpaa_eth: change DMA device") Signed-off-by: Liu Jian <liujian56@huawei.com> Acked-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-20Merge branch 'smc-fixes'David S. Miller
Karsten Graul says: ==================== net/smc: fixes 2020-07-20 Please apply the following patch series for smc to netdev's net tree. Patch 1 fixes a problem with a buffer that is not put back when the connection was killed in the meantime. Patch 2 fixes a wrong behaviour when the maximum dmb buffer count exceeded. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-20net/smc: fix dmb buffer shortageKarsten Graul
There is a current limit of 1920 registered dmb buffers per ISM device for smc-d. One link group can contain 255 connections, each connection is using one dmb buffer. When the connection is closed then the registered buffer is held in a queue and is reused by the next connection. When a link group is 'full' then another link group is created and uses an own buffer pool. The link groups are added to a list using list_add() which puts a new link group to the first position in the list. In the situation that many connections are opened (>1920) and a few of them stay open while others are closed quickly we end up with at least 8 link groups. For a new connection a matching link group is looked up, iterating over the list of link groups. The trailing 7 link groups all have registered dmb buffers which could be reused, while the first link group has only a few dmb buffers and then hit the 1920 limit. Because the first link group is not full (255 connection limit not reached) it is chosen and finally the connection falls back to TCP because there is no dmb buffer available in this link group. There are multiple ways to fix that: using list_add_tail() allows to scan older link groups first for free buffers which ensures that buffers are reused first. This fixes the problem for smc-r link groups as well. For smc-d there is an even better way to address this problem because smc-d does not have the 255 connections per link group limit. So fix the problem for smc-d by allowing large link groups. Fixes: c6ba7c9ba43d ("net/smc: add base infrastructure for SMC-D and ISM") Reviewed-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-20net/smc: put slot when connection is killedKarsten Graul
To get a send slot smc_wr_tx_get_free_slot() is called, which might wait for a free slot. When smc_wr_tx_get_free_slot() returns there is a check if the connection was killed in the meantime. In that case don't only return an error, but also put back the free slot. Fixes: b290098092e4 ("net/smc: cancel send and receive for terminated socket") Reviewed-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-20rxrpc: Fix sendmsg() returning EPIPE due to recvmsg() returning ENODATADavid Howells
rxrpc_sendmsg() returns EPIPE if there's an outstanding error, such as if rxrpc_recvmsg() indicating ENODATA if there's nothing for it to read. Change rxrpc_recvmsg() to return EAGAIN instead if there's nothing to read as this particular error doesn't get stored in ->sk_err by the networking core. Also change rxrpc_sendmsg() so that it doesn't fail with delayed receive errors (there's no way for it to report which call, if any, the error was caused by). Fixes: 17926a79320a ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both") Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-20fscrypt: rename FS_KEY_DERIVATION_NONCE_SIZEEric Biggers
The name "FS_KEY_DERIVATION_NONCE_SIZE" is a bit outdated since due to the addition of FSCRYPT_POLICY_FLAG_DIRECT_KEY, the file nonce may now be used as a tweak instead of for key derivation. Also, we're now prefixing the fscrypt constants with "FSCRYPT_" instead of "FS_". Therefore, rename this constant to FSCRYPT_FILE_NONCE_SIZE. Link: https://lore.kernel.org/r/20200708215722.147154-1-ebiggers@kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com>
2020-07-20fscrypt: add comments that describe the HKDF info stringsEric Biggers
Each HKDF context byte is associated with a specific format of the remaining part of the application-specific info string. Add comments so that it's easier to keep track of what these all are. Link: https://lore.kernel.org/r/20200708215529.146890-1-ebiggers@kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com>
2020-07-20Merge tag 'ieee802154-for-davem-2020-07-20' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan Stefan Schmidt says: ==================== pull-request: ieee802154 for net 2020-07-20 An update from ieee802154 for your *net* tree. A potential memory leak fix for adf7242 from Liu Jian, and one more HTTPS link change from Alexander A. Klimov. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-20net: bcmgenet: add missed clk_disable_unprepare in bcmgenet_probeZhang Changzhong
The driver forgets to call clk_disable_unprepare() in error path after a success calling for clk_prepare_enable(). Fix to goto err_clk_disable if clk_prepare_enable() is successful. Fixes: c80d36ff63a5 ("net: bcmgenet: Use devm_clk_get_optional() to get the clocks") Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Acked-by: Doug Berger <opendmb@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-20net: bcmgenet: fix error returns in bcmgenet_probe()Zhang Changzhong
The driver forgets to call clk_disable_unprepare() in error path after a success calling for clk_prepare_enable(). Fix to goto err_clk_disable if clk_prepare_enable() is successful. Fixes: 99d55638d4b0 ("net: bcmgenet: enable NETIF_F_HIGHDMA flag") Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Acked-by: Doug Berger <opendmb@gmail.com> Acked-by: Florian fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-20Merge tag 'vfio-v5.8-rc7' of git://github.com/awilliam/linux-vfio into masterLinus Torvalds
Pull VFIO fix from Alex Williamson: "Fix race with eventfd ctx cleared outside of mutex (Zeng Tao)" * tag 'vfio-v5.8-rc7' of git://github.com/awilliam/linux-vfio: vfio/pci: fix racy on error and request eventfd ctx
2020-07-20ath10k: Fix NULL pointer dereference in AHB device probeHauke Mehrtens
This fixes a NULL pointer dereference in the probe path for AHB devices. There attr parameter in the ath10k_ce_alloc_pipe() function is not initialized, but accessed. This function is called by ath10k_pci_setup_resource() which is called by ath10k_ahb_probe(). The struct ath10k_pci is also used for AHB devices and not only for PCI devices. The initialization of the new members of struct ath10k_pci is moved to ath10k_pci_setup_resource() which is used by the PCI and the AHB code. This also fixes a use after free bug in ath10k_pci_remove() when ar_pci is accessed after ath10k_core_destroy() was called, which calls ieee80211_free_hw() and frees this memory. This fixes the following bug seen with backports-5.8-rc2 on OpenWrt on a IPQ4019 device: [ 11.117462] 8<--- cut here --- [ 11.117494] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 11.119510] pgd = f377fd58 [ 11.127657] [00000000] *pgd=8e9a0835, *pte=00000000, *ppte=00000000 [ 11.130206] Internal error: Oops: 17 [#1] SMP ARM [ 11.136339] Modules linked in: ath10k_pci(+) ath10k_core ath xt_state xt_nat xt_conntrack xt_REDIRECT xt_MASQUERADE xt_FLOWOFFLOAD pppox ppp_generic nf_nat nf_flow_table_hw nf_flow_table nf_conntrack_rtcache nf_conntrack mac80211 ipt_REJECT cfg80211 xt_time xt_tcpudp xt_multiport xt_mark xt_mac xt_limit xt_comment xt_TCPMSS xt_LOG slhc nf_reject_ipv4 nf_log_ipv4 nf_defrag_ipv6 nf_defrag_ipv4 iptable_mangle iptable_filter ip_tables crc_ccitt compat nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables ip6t_REJECT x_tables nf_reject_ipv6 leds_gpio xhci_plat_hcd xhci_pci xhci_hcd dwc3 dwc3_qcom gpio_button_hotplug [ 11.174355] CPU: 2 PID: 257 Comm: kmodloader Not tainted 5.4.51 #0 [ 11.196585] Hardware name: Generic DT based system [ 11.202746] PC is at ath10k_ce_alloc_pipe+0x58/0x180 [ath10k_core] [ 11.207459] LR is at ath10k_pci_alloc_pipes+0x94/0xc8 [ath10k_pci] [ 11.213600] pc : [<bf2c96cc>] lr : [<bf2fbf98>] psr: 80000013 [ 11.219760] sp : cea0dc90 ip : cf4001f0 fp : 00000001 [ 11.225923] r10: 00000000 r9 : 00000018 r8 : ce4963b4 [ 11.231133] r7 : 00000000 r6 : ce491ea0 r5 : 00000000 r4 : ce4963b4 [ 11.236342] r3 : 0004a000 r2 : 0004a000 r1 : bf2d0d70 r0 : 00000006 [ 11.242942] Flags: Nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none [ 11.249452] Control: 10c5387d Table: 8e9c006a DAC: 00000051 [ 11.256656] Process kmodloader (pid: 257, stack limit = 0xaba286ca) [ 11.262386] Stack: (0xcea0dc90 to 0xcea0e000) [ 11.268462] dc80: 00000000 ce49629c ce491ea0 ce4963bc [ 11.272984] dca0: ce495ea0 bf2fbf98 00000002 ce4963a8 ce495ea0 00000000 ce491ea0 cf95d800 [ 11.281142] dcc0: cf95d810 cf95d810 00000001 bf2fc854 00000000 cf95d800 bf300748 ce495ea0 [ 11.289304] dce0: ce491ea0 d1300000 cf95d800 bf2fde8c 00000000 00000001 ce49cea0 00000000 [ 11.297462] dd00: 00000000 00000000 bf3010a0 cf95d810 bf3010a0 c0b61580 00000000 00000000 [ 11.305624] dd20: bf3010a0 0000000b c0b04e48 c06110c8 c0b61588 cf95d810 c0b61580 c060f740 [ 11.313781] dd40: cf95d810 00000000 bf3010a0 00000000 00000000 ce49d2a4 bf301100 c060fc90 [ 11.321943] dd60: 00000000 bf3010a0 cf95d810 c060fcf0 cf95d810 bf3010a0 c060fc98 c060dca4 [ 11.330101] dd80: cf809d58 cf952cb4 bf3010a0 ce967900 c0b1f2c8 c060ec28 bf3007b8 bf301038 [ 11.338263] dda0: bf3010a0 bf3010a0 c0b2d4d4 ffffe000 bf304000 c0610278 c0b04e48 c0b2d4d4 [ 11.346422] ddc0: ffffe000 bf2fe2b4 c0b04e48 bf30403c c0b04e48 c0302764 8040003f 00000001 [ 11.354582] dde0: 38e38e39 ce513580 c0b2cb50 cf801e00 cffbc6ac ce513600 cf801e00 cffbc6ac [ 11.362740] de00: 8040003e ce49d280 00000001 c0428d54 00000001 cf801e00 cffbc6ac ce513580 [ 11.370900] de20: ce49d280 0e391998 bf301100 ce49d340 d12d2000 ce49d280 00000001 c0398c2c [ 11.379061] de40: 00000001 cea0df34 cea0df34 00000001 d12d2000 c039ae48 bf30110c 00007fff [ 11.387221] de60: bf301100 c0398044 cf804028 bf301148 c0397674 bf30126c c08ee5c0 c08ee70c [ 11.395380] de80: bf30110c c0b04e48 c08ee518 00000000 c08ee570 c0b04e48 ce513600 fffff000 [ 11.403540] dea0: 00000001 ce513580 0000000d 0000000d 00000000 00000000 00000000 00000000 [ 11.411698] dec0: 00000000 00000000 6e72656b 00006c65 00000000 00000000 00000000 00000000 [ 11.419858] dee0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 11.428018] df00: 00000000 0e391998 00000000 0000c610 d12de610 00000000 0062c620 ffffe000 [ 11.436180] df20: 000129d1 00000051 00000000 c039b228 00000000 d12d7afd d12d8e80 d12d2000 [ 11.444337] df40: 0000c610 d12de0e8 d12ddfa8 d12dab74 00009000 00009570 00003a2c 00009cae [ 11.452498] df60: 00000000 00000000 00000000 00003a1c 0000001e 0000001f 00000018 00000000 [ 11.460656] df80: 00000010 00000000 00000000 00000000 00000003 00000080 c0301204 cea0c000 [ 11.468817] dfa0: 00000080 c0301000 00000000 00000000 00620010 0000c610 000129d1 00000014 [ 11.476975] dfc0: 00000000 00000000 00000003 00000080 0000c610 00000000 b6fc1d20 00000000 [ 11.485137] dfe0: bef0ad14 bef0acf8 00011e14 b6f74c94 60000010 00620010 00000000 00000000 [ 11.493390] [<bf2c96cc>] (ath10k_ce_alloc_pipe [ath10k_core]) from [<bf2fbf98>] (ath10k_pci_alloc_pipes+0x94/0xc8 [ath10k_pci]) [ 11.501498] [<bf2fbf98>] (ath10k_pci_alloc_pipes [ath10k_pci]) from [<bf2fc854>] (ath10k_pci_setup_resource+0xb8/0xf0 [ath10k_pci]) [ 11.512773] [<bf2fc854>] (ath10k_pci_setup_resource [ath10k_pci]) from [<bf2fde8c>] (ath10k_ahb_probe+0x32c/0x670 [ath10k_pci]) [ 11.524566] [<bf2fde8c>] (ath10k_ahb_probe [ath10k_pci]) from [<c06110c8>] (platform_drv_probe+0x34/0x70) [ 11.536016] [<c06110c8>] (platform_drv_probe) from [<c060f740>] (really_probe+0x1f0/0x358) [ 11.545729] [<c060f740>] (really_probe) from [<c060fc90>] (device_driver_attach+0x58/0x60) [ 11.553886] [<c060fc90>] (device_driver_attach) from [<c060fcf0>] (__driver_attach+0x58/0xcc) [ 11.562134] [<c060fcf0>] (__driver_attach) from [<c060dca4>] (bus_for_each_dev+0x68/0x8c) [ 11.570731] [<c060dca4>] (bus_for_each_dev) from [<c060ec28>] (bus_add_driver+0x1c8/0x1d8) [ 11.578886] [<c060ec28>] (bus_add_driver) from [<c0610278>] (driver_register+0x74/0x108) [ 11.587060] [<c0610278>] (driver_register) from [<bf2fe2b4>] (ath10k_ahb_init+0x18/0x38 [ath10k_pci]) [ 11.595320] [<bf2fe2b4>] (ath10k_ahb_init [ath10k_pci]) from [<bf30403c>] (init_module+0x3c/0x1000 [ath10k_pci]) [ 11.604432] [<bf30403c>] (init_module [ath10k_pci]) from [<c0302764>] (do_one_initcall+0x84/0x1d8) [ 11.614657] [<c0302764>] (do_one_initcall) from [<c0398c2c>] (do_init_module+0x5c/0x228) [ 11.623421] [<c0398c2c>] (do_init_module) from [<c039ae48>] (load_module+0x1fc8/0x224c) [ 11.631663] [<c039ae48>] (load_module) from [<c039b228>] (sys_init_module+0x15c/0x17c) [ 11.639390] [<c039b228>] (sys_init_module) from [<c0301000>] (ret_fast_syscall+0x0/0x54) [ 11.647370] Exception stack(0xcea0dfa8 to 0xcea0dff0) [ 11.655615] dfa0: 00000000 00000000 00620010 0000c610 000129d1 00000014 [ 11.660569] dfc0: 00000000 00000000 00000003 00000080 0000c610 00000000 b6fc1d20 00000000 [ 11.668725] dfe0: bef0ad14 bef0acf8 00011e14 b6f74c94 [ 11.676886] Code: e1c321d4 e0433002 e0232397 e5843014 (e5953000) [ 11.681958] ---[ end trace 8f35917de2e76854 ]--- Fixes: 521fc37be3d8 ("ath10k: Avoid override CE5 configuration for QCA99X0 chipsets") Reported-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> [ipq40xx/ map-ac2200] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200714205802.17688-1-hauke@hauke-m.de
2020-07-20iwlwifi: Make some Killer Wireless-AC 1550 cards work againAlessio Bonfiglio
Fix the regression introduced by commit c8685937d07f ("iwlwifi: move pu devices to new table") by adding the ids and the configurations of two missing Killer 1550 cards in order to configure and let them work correctly again (following the new table convention). Resolve bug 208141 ("Wireless ac 9560 not working kernel 5.7.2", https://bugzilla.kernel.org/show_bug.cgi?id=208141). Fixes: c8685937d07f ("iwlwifi: move pu devices to new table") Signed-off-by: Alessio Bonfiglio <alessio.bonfiglio@mail.polimi.it> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200714091911.4442-1-alessio.bonfiglio@mail.polimi.it
2020-07-20ath9k: Fix regression with Atheros 9271Mark O'Donovan
This fix allows ath9k_htc modules to connect to WLAN once again. Fixes: 2bbcaaee1fcb ("ath9k: Fix general protection fault in ath9k_hif_usb_rx_cb") Link: https://bugzilla.kernel.org/show_bug.cgi?id=208251 Signed-off-by: Mark O'Donovan <shiftee@posteo.net> Reported-by: Roman Mamedov <rm@romanrm.net> Tested-by: Viktor Jägersküpper <viktor_jaegerskuepper@freenet.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200711043324.8079-1-shiftee@posteo.net
2020-07-20tools headers UAPI: Update tools's copy of linux/perf_event.hLeo Yan
To get the changes in the commit: "perf: Add perf_event_mmap_page::cap_user_time_short ABI" This update is a prerequisite to add support for short clock counters related ABI extension. Signed-off-by: Leo Yan <leo.yan@linaro.org> Link: https://lore.kernel.org/r/20200716051130.4359-8-leo.yan@linaro.org Signed-off-by: Will Deacon <will@kernel.org>
2020-07-20arm64: perf: Add cap_user_time_shortPeter Zijlstra
This completes the ARM64 cap_user_time support. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Leo Yan <leo.yan@linaro.org> Link: https://lore.kernel.org/r/20200716051130.4359-7-leo.yan@linaro.org Signed-off-by: Will Deacon <will@kernel.org>
2020-07-20perf: Add perf_event_mmap_page::cap_user_time_short ABIPeter Zijlstra
In order to support short clock counters, provide an ABI extension. As a whole: u64 time, delta, cyc = read_cycle_counter(); + if (cap_user_time_short) + cyc = time_cycle + ((cyc - time_cycle) & time_mask); delta = mul_u64_u32_shr(cyc, time_mult, time_shift); if (cap_user_time_zero) time = time_zero + delta; delta += time_offset; Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Leo Yan <leo.yan@linaro.org> Link: https://lore.kernel.org/r/20200716051130.4359-6-leo.yan@linaro.org Signed-off-by: Will Deacon <will@kernel.org>
2020-07-20arm64: perf: Only advertise cap_user_time for arch_timerPeter Zijlstra
When sched_clock is running on anything other than arch_timer, don't advertise cap_user_time*. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Leo Yan <leo.yan@linaro.org> Link: https://lore.kernel.org/r/20200716051130.4359-5-leo.yan@linaro.org Requested-by: Will Deacon <will@kernel.org> Signed-off-by: Will Deacon <will@kernel.org>
2020-07-20arm64: perf: Implement correct cap_user_timePeter Zijlstra
As reported by Leo; the existing implementation is broken when the clock and counter don't intersect at 0. Use the sched_clock's struct clock_read_data information to correctly implement cap_user_time and cap_user_time_zero. Note that the ARM64 counter is architecturally only guaranteed to be 56bit wide (implementations are allowed to be wider) and the existing perf ABI cannot deal with wrap-around. This implementation should also be faster than the old; seeing how we don't need to recompute mult and shift all the time. [leoyan: Use mul_u64_u32_shr() to convert cyc to ns to avoid overflow] Reported-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Leo Yan <leo.yan@linaro.org> Link: https://lore.kernel.org/r/20200716051130.4359-4-leo.yan@linaro.org Signed-off-by: Will Deacon <will@kernel.org>
2020-07-20time/sched_clock: Use raw_read_seqcount_latch()Ahmed S. Darwish
sched_clock uses seqcount_t latching to switch between two storage places protected by the sequence counter. This allows it to have interruptible, NMI-safe, seqcount_t write side critical sections. Since 7fc26327b756 ("seqlock: Introduce raw_read_seqcount_latch()"), raw_read_seqcount_latch() became the standardized way for seqcount_t latch read paths. Due to the dependent load, it also has one read memory barrier less than the currently used raw_read_seqcount() API. Use raw_read_seqcount_latch() for the seqcount_t latch read path. Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de> Signed-off-by: Leo Yan <leo.yan@linaro.org> Link: https://lkml.kernel.org/r/20200625085745.GD117543@hirez.programming.kicks-ass.net Link: https://lkml.kernel.org/r/20200715092345.GA231464@debian-buster-darwi.lab.linutronix.de Link: https://lore.kernel.org/r/20200716051130.4359-3-leo.yan@linaro.org References: 1809bfa44e10 ("timers, sched/clock: Avoid deadlock during read from NMI") Signed-off-by: Will Deacon <will@kernel.org>
2020-07-20sched_clock: Expose struct clock_read_dataPeter Zijlstra
In order to support perf_event_mmap_page::cap_time features, an architecture needs, aside from a userspace readable counter register, to expose the exact clock data so that userspace can convert the counter register into a correct timestamp. Provide struct clock_read_data and two (seqcount) helpers so that architectures (arm64 in specific) can expose the numbers to userspace. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Leo Yan <leo.yan@linaro.org> Link: https://lore.kernel.org/r/20200716051130.4359-2-leo.yan@linaro.org Signed-off-by: Will Deacon <will@kernel.org>
2020-07-20arm64: perf: Correct the event index in sysfsShaokun Zhang
When PMU event ID is equal or greater than 0x4000, it will be reduced by 0x4000 and it is not the raw number in the sysfs. Let's correct it and obtain the raw event ID. Before this patch: cat /sys/bus/event_source/devices/armv8_pmuv3_0/events/sample_feed event=0x001 After this patch: cat /sys/bus/event_source/devices/armv8_pmuv3_0/events/sample_feed event=0x4001 Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com> Cc: Will Deacon <will@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/1592487344-30555-3-git-send-email-zhangshaokun@hisilicon.com [will: fixed formatting of 'if' condition] Signed-off-by: Will Deacon <will@kernel.org>
2020-07-20zonefs: count pages after truncating the iteratorJohannes Thumshirn
Count pages after possibly truncating the iterator to the maximum zone append size, not before. Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
2020-07-20zonefs: Fix compilation warningDamien Le Moal
Avoid the compilation warning "Variable 'ret' is reassigned a value before the old one has been used." in zonefs_create_zgroup() by setting ret for the error path only if an error happens. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
2020-07-20s390/bpf: implement BPF_PROBE_MEMIlya Leoshkevich
This is a s390 port of x86 commit 3dec541b2e63 ("bpf: Add support for BTF pointers to x86 JIT"). Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-07-20s390/kernel: expand exception table logic to allow new handling optionsIlya Leoshkevich
This is a s390 port of commit 548acf19234d ("x86/mm: Expand the exception table logic to allow new handling options"), which is needed for implementing BPF_PROBE_MEM on s390. The new handler field is made 64-bit in order to allow pointing from dynamically allocated entries to handlers in kernel text. Unlike on x86, NULL is used instead of ex_handler_default. This is because exception tables are used by boot/text_dma.S, and it would be a pain to preserve ex_handler_default. The new infrastructure is ignored in early_pgm_check_handler, since there is no pt_regs. Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-07-20s390/kernel: unify EX_TABLE* implementationsIlya Leoshkevich
Replace three implementations with one using using __stringify_in_c macro conveniently "borrowed" from powerpc and microblaze. Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-07-20s390/mm: allow order 10 allocationsHeiko Carstens
Get rid of FORCE_MAX_ZONEORDER which limited allocations to order 8 (= 1MB) and use the default, which allows for order 10 (= 4MB) allocations. Given that s390 allows less than the default this caused some memory allocation problems more or less unique to s390 from time to time. Note: this was originally introduced with commit 684de39bd795 ("[S390] Fix IPL from NSS.") in order to support Named Saved Segments, which could start/end at an arbitrary 1 megabyte boundary and also before support for sparsemem vmemmmap was enabled. Since NSS support is gone, but sparsemem vmemmap support is available this limitation can go away. Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-07-20s390/mm: avoid trimming to MAX_ORDERHeiko Carstens
Trimming to MAX_ORDER was originally done in order to avoid to set HOLES_IN_ZONE, which in turn would enable a quite expensive pfn_valid() check. pfn_valid() however only checks if a struct page exists for a given pfn. With sparsemen vmemmap there are always struct pages, since memmaps are allocated for whole sections. Therefore remove the HOLES_IN_ZONE comment and the trimming. Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-07-20s390/qdio: remove internal polling in non-thinint pathJulian Wiedmann
For non-thinint devices in LPAR, qdio polls an idle Input Queue for a little while to catch more work. But platform support for thinints has been around practically _forever_ by now, so this micro-optimization is seeing 0 actual use. Remove it to reduce the overall complexity of the hot path. In the meantime we also grew support for driver-level polling (eg. NAPI in qeth), so it's quite questionable how useful this would actually be on current kernels. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-07-20s390/qdio: allow to scan all 128 Input SBALsJulian Wiedmann
The comment is inaccurate, qdio_inbound_q_moved() and/or its callers no longer get confused by a count of 128 completed SBALs. Scanning all 128 SBALs at once can improve IRQ reduction (as we now place the ACK at the right spot), and reduce the amount of processing needed to handle all completed SBALs. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-07-20s390/qdio: fix statistics for 128 SBALsJulian Wiedmann
Old code would only scan up to 127 SBALs at once. So the last statistics bucket was set aside to count "discovered 127 SBALs with new work" events. But nowadays we allow to scan all 128 SBALs for Output Queues, and a subsequent patch will introduce the same for Input Queues. So fix up the accounting to use the last bucket only when all 128 SBALs have been discovered with new work. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-07-20s390/mm: fix typo in commentHeiko Carstens
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-07-20staging: comedi: addi_apci_1564: check INSN_CONFIG_DIGITAL_TRIG shiftIan Abbott
The `INSN_CONFIG` comedi instruction with sub-instruction code `INSN_CONFIG_DIGITAL_TRIG` includes a base channel in `data[3]`. This is used as a right shift amount for other bitmask values without being checked. Shift amounts greater than or equal to 32 will result in undefined behavior. Add code to deal with this. Fixes: 1e15687ea472 ("staging: comedi: addi_apci_1564: add Change-of-State interrupt subdevice and required functions") Cc: <stable@vger.kernel.org> #3.17+ Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Link: https://lore.kernel.org/r/20200717145257.112660-4-abbotti@mev.co.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-20staging: comedi: addi_apci_1500: check INSN_CONFIG_DIGITAL_TRIG shiftIan Abbott
The `INSN_CONFIG` comedi instruction with sub-instruction code `INSN_CONFIG_DIGITAL_TRIG` includes a base channel in `data[3]`. This is used as a right shift amount for other bitmask values without being checked. Shift amounts greater than or equal to 32 will result in undefined behavior. Add code to deal with this, adjusting the checks for invalid channels so that enabled channel bits that would have been lost by shifting are also checked for validity. Only channels 0 to 15 are valid. Fixes: a8c66b684efaf ("staging: comedi: addi_apci_1500: rewrite the subdevice support functions") Cc: <stable@vger.kernel.org> #4.0+: ef75e14a6c93: staging: comedi: verify array index is correct before using it Cc: <stable@vger.kernel.org> #4.0+ Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Link: https://lore.kernel.org/r/20200717145257.112660-5-abbotti@mev.co.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-20staging: comedi: addi_apci_1032: check INSN_CONFIG_DIGITAL_TRIG shiftIan Abbott
The `INSN_CONFIG` comedi instruction with sub-instruction code `INSN_CONFIG_DIGITAL_TRIG` includes a base channel in `data[3]`. This is used as a right shift amount for other bitmask values without being checked. Shift amounts greater than or equal to 32 will result in undefined behavior. Add code to deal with this. Fixes: 33cdce6293dcc ("staging: comedi: addi_apci_1032: conform to new INSN_CONFIG_DIGITAL_TRIG") Cc: <stable@vger.kernel.org> #3.8+ Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Link: https://lore.kernel.org/r/20200717145257.112660-3-abbotti@mev.co.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-20staging: comedi: ni_6527: fix INSN_CONFIG_DIGITAL_TRIG supportIan Abbott
`ni6527_intr_insn_config()` processes `INSN_CONFIG` comedi instructions for the "interrupt" subdevice. When `data[0]` is `INSN_CONFIG_DIGITAL_TRIG` it is configuring the digital trigger. When `data[2]` is `COMEDI_DIGITAL_TRIG_ENABLE_EDGES` it is configuring rising and falling edge detection for the digital trigger, using a base channel number (or shift amount) in `data[3]`, a rising edge bitmask in `data[4]` and falling edge bitmask in `data[5]`. If the base channel number (shift amount) is greater than or equal to the number of channels (24) of the digital input subdevice, there are no changes to the rising and falling edges, so the mask of channels to be changed can be set to 0, otherwise the mask of channels to be changed, and the rising and falling edge bitmasks are shifted by the base channel number before calling `ni6527_set_edge_detection()` to change the appropriate registers. Unfortunately, the code is comparing the base channel (shift amount) to the interrupt subdevice's number of channels (1) instead of the digital input subdevice's number of channels (24). Fix it by comparing to 32 because all shift amounts for an `unsigned int` must be less than that and everything from bit 24 upwards is ignored by `ni6527_set_edge_detection()` anyway. Fixes: 110f9e687c1a8 ("staging: comedi: ni_6527: support INSN_CONFIG_DIGITAL_TRIG") Cc: <stable@vger.kernel.org> # 3.17+ Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Link: https://lore.kernel.org/r/20200717145257.112660-2-abbotti@mev.co.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-20Merge tag 'misc-habanalabs-fixes-2020-07-19' of ↵Greg Kroah-Hartman
git://people.freedesktop.org/~gabbayo/linux into char-misc-linus Oded writes: This tag contains a single bug fix for 5.8-rc7: - Check that an index is in valid range before using it to access an array. The index is received from the user. This is to prevent a possible out-of-bounds access error. * tag 'misc-habanalabs-fixes-2020-07-19' of git://people.freedesktop.org/~gabbayo/linux: habanalabs: prevent possible out-of-bounds array access
2020-07-20Merge tag 'fpga-late-fixes-for-5.8' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/mdf/linux-fpga into char-misc-linus Moritz writes: FPGA manager fixes for 5.8 Here are two (late) dfl fixes for the the 5.8 release. Matthew's fix addresses an issue in the reset of a port. Xu'x fix addresses a linter warning. All patches have been reviewed on the mailing list, and have been in the last few linux-next releases (as part of my fixes branch) without issues. Signed-off-by: Moritz Fischer <mdf@kernel.org> * tag 'fpga-late-fixes-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mdf/linux-fpga: fpga: dfl: fix bug in port reset handshake fpga: dfl: pci: reduce the scope of variable 'ret'
2020-07-20net: ieee802154: adf7242: Replace HTTP links with HTTPS onesAlexander A. Klimov
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de> Link: https://lore.kernel.org/r/20200719113142.58304-1-grandmaster@al2klimov.de Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
2020-07-20ARM: dts: imx6qdl-icore: Fix OTG_ID pin and sdcard detectMichael Trimarchi
The current pin muxing scheme muxes GPIO_1 pad for USB_OTG_ID because of which when card is inserted, usb otg is enumerated and the card is never detected. [ 64.492645] cfg80211: failed to load regulatory.db [ 64.492657] imx-sdma 20ec000.sdma: external firmware not found, using ROM firmware [ 76.343711] ci_hdrc ci_hdrc.0: EHCI Host Controller [ 76.349742] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 2 [ 76.388862] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 [ 76.396650] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.08 [ 76.405412] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 76.412763] usb usb2: Product: EHCI Host Controller [ 76.417666] usb usb2: Manufacturer: Linux 5.8.0-rc1-next-20200618 ehci_hcd [ 76.424623] usb usb2: SerialNumber: ci_hdrc.0 [ 76.431755] hub 2-0:1.0: USB hub found [ 76.435862] hub 2-0:1.0: 1 port detected The TRM mentions GPIO_1 pad should be muxed/assigned for card detect and ENET_RX_ER pad for USB_OTG_ID for proper operation. This patch fixes pin muxing as per TRM and is tested on a i.Core 1.5 MX6 DL SOM. [ 22.449165] mmc0: host does not support reading read-only switch, assuming write-enable [ 22.459992] mmc0: new high speed SDHC card at address 0001 [ 22.469725] mmcblk0: mmc0:0001 EB1QT 29.8 GiB [ 22.478856] mmcblk0: p1 p2 Fixes: 6df11287f7c9 ("ARM: dts: imx6q: Add Engicam i.CoreM6 Quad/Dual initial support") Cc: stable@vger.kernel.org Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Suniel Mahesh <sunil@amarulasolutions.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-07-20ARM: dts: imx6sx-sabreauto: Fix the phy-mode on fec2Fabio Estevam
Commit 0672d22a1924 ("ARM: dts: imx: Fix the AR803X phy-mode") fixed the phy-mode for fec1, but missed to fix it for the fec2 node. Fix fec2 to also use "rgmii-id" as the phy-mode. Cc: <stable@vger.kernel.org> Fixes: 0672d22a1924 ("ARM: dts: imx: Fix the AR803X phy-mode") Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-07-20ARM: dts: imx6sx-sdb: Fix the phy-mode on fec2Fabio Estevam
Commit 0672d22a1924 ("ARM: dts: imx: Fix the AR803X phy-mode") fixed the phy-mode for fec1, but missed to fix it for the fec2 node. Fix fec2 to also use "rgmii-id" as the phy-mode. Cc: <stable@vger.kernel.org> Fixes: 0672d22a1924 ("ARM: dts: imx: Fix the AR803X phy-mode") Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-07-19bonding: check error value of register_netdevice() immediatelyTaehee Yoo
If register_netdevice() is failed, net_device should not be used because variables are uninitialized or freed. So, the routine should be stopped immediately. But, bond_create() doesn't check return value of register_netdevice() immediately. That will result in a panic because of using uninitialized or freed memory. Test commands: modprobe netdev-notifier-error-inject echo -22 > /sys/kernel/debug/notifier-error-inject/netdev/\ actions/NETDEV_REGISTER/error modprobe bonding max_bonds=3 Splat looks like: [ 375.028492][ T193] general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b6b6b: 0000 [#1] SMP DEBUG_PAGEALLOC PTI [ 375.033207][ T193] CPU: 2 PID: 193 Comm: kworker/2:2 Not tainted 5.8.0-rc4+ #645 [ 375.036068][ T193] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 [ 375.039673][ T193] Workqueue: events linkwatch_event [ 375.041557][ T193] RIP: 0010:dev_activate+0x4a/0x340 [ 375.043381][ T193] Code: 40 a8 04 0f 85 db 00 00 00 8b 83 08 04 00 00 85 c0 0f 84 0d 01 00 00 31 d2 89 d0 48 8d 04 40 48 c1 e0 07 48 03 83 00 04 00 00 <48> 8b 48 10 f6 41 10 01 75 08 f0 80 a1 a0 01 00 00 fd 48 89 48 08 [ 375.050267][ T193] RSP: 0018:ffff9f8facfcfdd8 EFLAGS: 00010202 [ 375.052410][ T193] RAX: 6b6b6b6b6b6b6b6b RBX: ffff9f8fae6ea000 RCX: 0000000000000006 [ 375.055178][ T193] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff9f8fae6ea000 [ 375.057762][ T193] RBP: ffff9f8fae6ea000 R08: 0000000000000000 R09: 0000000000000000 [ 375.059810][ T193] R10: 0000000000000001 R11: 0000000000000000 R12: ffff9f8facfcfe08 [ 375.061892][ T193] R13: ffffffff883587e0 R14: 0000000000000000 R15: ffff9f8fae6ea580 [ 375.063931][ T193] FS: 0000000000000000(0000) GS:ffff9f8fbae00000(0000) knlGS:0000000000000000 [ 375.066239][ T193] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 375.067841][ T193] CR2: 00007f2f542167a0 CR3: 000000012cee6002 CR4: 00000000003606e0 [ 375.069657][ T193] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 375.071471][ T193] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 375.073269][ T193] Call Trace: [ 375.074005][ T193] linkwatch_do_dev+0x4d/0x50 [ 375.075052][ T193] __linkwatch_run_queue+0x10b/0x200 [ 375.076244][ T193] linkwatch_event+0x21/0x30 [ 375.077274][ T193] process_one_work+0x252/0x600 [ 375.078379][ T193] ? process_one_work+0x600/0x600 [ 375.079518][ T193] worker_thread+0x3c/0x380 [ 375.080534][ T193] ? process_one_work+0x600/0x600 [ 375.081668][ T193] kthread+0x139/0x150 [ 375.082567][ T193] ? kthread_park+0x90/0x90 [ 375.083567][ T193] ret_from_fork+0x22/0x30 Fixes: e826eafa65c6 ("bonding: Call netif_carrier_off after register_netdevice") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-19arm64: dts: clearfog-gt-8k: fix switch link configurationRussell King
The commit below caused a regression for clearfog-gt-8k, where the link between the switch and the host does not come up. Investigation revealed two issues: - MV88E6xxx DSA no longer allows an in-band link to come up as the link is programmed to be forced down. Commit "net: dsa: mv88e6xxx: fix in-band AN link establishment" addresses this. - The dts configured dissimilar link modes at each end of the host to switch link; the host was configured using a fixed link (so has no in-band status) and the switch was configured to expect in-band status. With both issues fixed, the regression is resolved. Fixes: 34b5e6a33c1a ("net: dsa: mv88e6xxx: Configure MAC when using fixed link") Reported-by: Martin Rowe <martin.p.rowe@gmail.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-19net: dsa: mv88e6xxx: fix in-band AN link establishmentRussell King
If in-band negotiation or fixed-link modes are specified for a DSA port, the DSA code will force the link down during initialisation. For fixed-link mode, this is fine, as phylink will manage the link state. However, for in-band mode, phylink expects the PCS to detect link, which will not happen if the link is forced down. There is a related issue that in in-band mode, the link could come up while we are making configuration changes, so we should force the link down prior to reconfiguring the interface mode. This patch addresses both issues. Fixes: 3be98b2d5fbc ("net: dsa: Down cpu/dsa ports phylink will control") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-20drm/lima: fix wait pp reset timeoutQiang Yu
PP bcast is marked as doing async reset after job is done. When resume after suspend, each PP is reset individually, so no need to reset in PP bcast resume. But I forgot to clear the PP bcast async reset mark so call into async wait before job run and gets timeout. Closes: https://gitlab.freedesktop.org/lima/linux/-/issues/34 Fixes: 3446d7e9883d ("drm/lima: add resume/suspend callback for each ip") Reviewed-by: Erico Nunes <nunes.erico@gmail.com> Signed-off-by: Qiang Yu <yuq825@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200719073050.776962-1-yuq825@gmail.com
generated by cgit (git 2.34.1) at 2025-09-14 20:10:06 +0000