| Age | Commit message (Collapse) | Author |
|---|
|
For sdio chip, if the rssi is not good, then it have some retry,
firmware will indicate the msdu list of a ppdu with a hole, it
means it lost the hole msdu, after the msdu retry from AP, the
hole msdu will indicate from firmware later. The hole msdu's PN
check will fail and the hole msdu will be dropped.
PN check fail example:
Sequence number PN number PN check status
3814 6101 success
3815 6102 success
3816 6103 success
3818 6105 success
3819 6106 success
3820 6107 success
3817 6104 fail
The correct logic is reorder the msdu list and then do PN check.
ieee80211_rx_reorder_ampdu of mac80211 will do the reorer logic
and then do PN check in ieee80211_rx_h_decrypt of mac80211.
example after reorder:
Sequence number PN number PN check status
3814 6101 success
3815 6102 success
3816 6103 success
3817 6104 success
3818 6105 success
3819 6106 success
3820 6107 success
Tested with QCA6174 SDIO with firmware
WLAN.RMH.4.4.1-00017-QCARMSWP-1.
Signed-off-by: Wen Gong <wgong@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|
|
For PMF case, the action,deauth,disassoc management need to encrypt
by hardware, it need to reserve 8 bytes for encryption, otherwise
the packet will be sent out with error format, then PMF case will
fail.
After add the 8 bytes, it will pass the PMF case.
Tested with QCA6174 SDIO with firmware
WLAN.RMH.4.4.1-00005-QCARMSWP-1.
Signed-off-by: Wen Gong <wgong@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull ipc regression fixes from Arnd Bergmann:
"Fix ipc regressions from y2038 patches
These are two regression fixes for bugs that got introduced during the
system call rework that went into linux-5.1 but only bisected and
fixed now:
- One patch affects semtimedop() on many of the less common 32-bit
architectures, this just needs a single-line bugfix.
- The other affects only sparc64 and has a slightly more invasive
workaround to apply the same change to sparc64 that was done to the
generic code used everywhere else"
* tag 'ipc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
ipc: fix sparc64 ipc() wrapper
ipc: fix semtimedop for generic 32-bit architectures
|
|
At the same time use the official naming for the knobs.
Tested on a Zenbook UX430UNR.
Signed-off-by: Kristian Klausen <kristian@klausen.dk>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
As recommended by Azure host team, the bytes 4, 5 have more uniqueness
(info entropy) than bytes 8, 9 so use them as the PCI domain numbers.
On older hosts, bytes 4, 5 can also be used -- no backward compatibility
issues are introduced and the chance of collision is greatly reduced.
In the rare cases of collision, the driver code detects and finds
another number that is not in use.
Suggested-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Sasha Levin <sashal@kernel.org>
|
|
The recent consolidation of the three permission checks introduced a subtle
regression. For timer_create() with a process wide timer it returns the
current task if the lookup through the PID which is encoded into the
clockid results in returning current.
That's broken because it does not validate whether the current task is the
group leader.
That was caused by the two different variants of permission checks:
- posix_cpu_timer_get() allowed access to the process wide clock when the
looked up task is current. That's not an issue because the process wide
clock is in the shared sighand.
- posix_cpu_timer_create() made sure that the looked up task is the group
leader.
Restore the previous state.
Note, that these permission checks are more than questionable, but that's
subject to follow up changes.
Fixes: 6ae40e3fdcd3 ("posix-cpu-timers: Provide task validation functions")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1909052314110.1902@nanos.tec.linutronix.de
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ASoC: Updates for v5.4
Quite a big update this time around, particularly in the core
where we've had a lot of cleanups from Morimoto-san - there's
not much functional change but quite a bit of modernization
going on. We've also seen a lot of driver work, a lot of it
cleanups but also some particular drivers.
- Lots and lots of cleanups from Morimoto-san and Yue Haibing.
- Lots of cleanups and enhancements to the Freescale, sunxi dnd
Intel rivers.
- Initial Sound Open Firmware suppot for i.MX8.
- Removal of w90x900 and nuc900 drivers as the platforms are
being removed.
- New support for Cirrus Logic CS47L15 and CS47L92, Freescale
i.MX 7ULP and 8MQ, Meson G12A and NXP UDA1334
|
|
It is not used outside gpiolib-acpi.c module, so there is no need to
export it.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://lore.kernel.org/r/20190904172624.GA76617@dtor-ws
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
We should only try to execute fallback quirks handling when previous
call returned -ENOENT, and not when we did not get -EPROBE_DEFER.
The other errors should be treated as hard errors: we did find the GPIO
description, but for some reason we failed to handle it properly.
The fallbacks should only be executed when previous handlers returned
-ENOENT, which means the mapping/description was not found.
Also let's remove the explicit deferral handling when iterating through
GPIO suffixes: it is not needed anymore as we will not be calling
fallbacks for anything but -ENOENT.
Fixes: df451f83e1fc ("gpio: of: fix Freescale SPI CS quirk handling")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://lore.kernel.org/r/20190903231856.GA165165@dtor-ws
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Commit 3bd7f6589f67 ("spi: bcm2835: Overcome sglist entry length
limitation") amended the BCM2835 SPI driver with support for DMA
transfers whose buffers are not aligned to 4 bytes and require more than
one sglist entry.
When testing this feature with upcoming commits to speed up TX-only and
RX-only transfers, I noticed that SPI transmission sometimes breaks.
A function introduced by the commit, bcm2835_spi_transfer_prologue(),
performs one or two PIO transmissions as a prologue to the actual DMA
transmission. It turns out that the breakage goes away if the DONE bit
in the CS register is set when ending such a PIO transmission.
The DONE bit signifies emptiness of the TX FIFO. According to the spec,
the bit is of type RO, so writing it should never have any effect.
Perhaps the spec is wrong and the bit is actually of type RW1C.
E.g. the I2C controller on the BCM2835 does have an RW1C DONE bit which
needs to be cleared by the driver. Another, possibly more likely
explanation is that it's a hardware erratum since the issue does not
occur consistently.
Either way, amend bcm2835_spi_transfer_prologue() to always write the
DONE bit.
Usually a transmission is ended by bcm2835_spi_reset_hw(). If the
transmission was successful, the TX FIFO is empty and thus the DONE bit
is set when bcm2835_spi_reset_hw() reads the CS register. The bit is
then written back to the register, so we happen to do the right thing.
However if DONE is not set, e.g. because transmission is aborted with
a non-empty TX FIFO, the bit won't be written by bcm2835_spi_reset_hw()
and it seems possible that transmission might subsequently break. To be
on the safe side, likewise amend bcm2835_spi_reset_hw() to always write
the bit.
Tested-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Acked-by: Stefan Wahren <wahrenst@gmx.net>
Acked-by: Martin Sperl <kernel@martin.sperl.org>
Link: https://lore.kernel.org/r/edb004dff4af6106f6bfcb89e1a96391e96eb857.1564825752.git.lukas@wunner.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into fixes
gpio: fixes for v5.4
- fix a memory leak in gpio-mockup
- fix two flag validation bugs in gpiolib's character device ioctl()'s
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-gpio-intel into devel
intel-gpio for v5.4-1
The clean up of IRQ chip initialization has been done in few drivers.
Stale record in MAINTAINERS database is removed.
The following is an automated git shortlog grouped by driver:
intel-mid:
- Pass irqchip when adding gpiochip
- MAINTAINERS: Remove stale record for gpio-intel-mid.c
lynxpoint:
- Pass irqchip when adding gpiochip
merrifield:
- Pass irqchip when adding gpiochip
pch:
- Use dev_get_drvdata
|
|
Pro5 SoC has same scheme of USB3 VBUS as Pro4, so the data for Pro5 is
equivalent to Pro4.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/1568080304-1572-1-git-send-email-hayashi.kunihiko@socionext.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This adds the documentation to the compatible regulator-fixed-clock.
This binding is a special binding of regulator-fixed and adds the
ability to add a clock to regulator-fixed, so the regulator can be
enabled and disabled with that clock. If the special compatible
regulator-fixed-clock is used it is mandatory to supply a clock.
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20190910062103.39641-4-philippe.schenker@toradex.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This commit adds the possibility to choose the compatible
"regulator-fixed-clock" in devicetree.
This is a special regulator-fixed that has to have a clock, from which
the regulator gets switched on and off.
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Link: https://lore.kernel.org/r/20190910062103.39641-2-philippe.schenker@toradex.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The value under 's2mps11->ext_control_gpiod[i]' is assigned to local
variable and used in probe in one place before. Use it consistently
later so code will be easier to read.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20190909155723.24734-1-krzk@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Modules using these symbols are required to explicitly import the
namespace. This patch was generated with the following steps and serves
as a reference to use the symbol namespace feature:
1) Define DEFAULT_SYMBOL_NAMESPACE in the corresponding Makefile
2) make (see warnings during modpost about missing imports)
3) make nsdeps
Instead of a DEFAULT_SYMBOL_NAMESPACE definition, the EXPORT_SYMBOL_NS
variants can be used to explicitly specify the namespace. The advantage
of the method used here is that newly added symbols are automatically
exported and existing ones are exported without touching their
respective EXPORT_SYMBOL macro expansion.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Matthias Maennich <maennich@google.com>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
|
|
USB_STORAGE was defined as "usb-storage: " and used in a single location
as argument to printk. In order to be able to use the name
'USB_STORAGE', drop the definition and use the string directly for the
printk call.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Matthias Maennich <maennich@google.com>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
|
|
Describe using Symbol Namespaces from a perspective of a user. I.e.
module authors or subsystem maintainers.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Matthias Maennich <maennich@google.com>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
|
|
A script that uses the '<module>.ns_deps' files generated by modpost to
automatically add the required symbol namespace dependencies to each
module.
Usage:
1) Move some symbols to a namespace with EXPORT_SYMBOL_NS() or define
DEFAULT_SYMBOL_NAMESPACE
2) Run 'make' (or 'make modules') and get warnings about modules not
importing that namespace.
3) Run 'make nsdeps' to automatically add required import statements
to said modules.
This makes it easer for subsystem maintainers to introduce and maintain
symbol namespaces into their codebase.
Co-developed-by: Martijn Coenen <maco@android.com>
Signed-off-by: Martijn Coenen <maco@android.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Matthias Maennich <maennich@google.com>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
|
|
This patch adds an option to modpost to generate a <module>.ns_deps file
per module, containing the namespace dependencies for that module.
E.g. if the linked module my-module.ko would depend on the symbol
myfunc.MY_NS in the namespace MY_NS, the my-module.ns_deps file created
by modpost would contain the entry MY_NS to express the namespace
dependency of my-module imposed by using the symbol myfunc.
These files can subsequently be used by static analysis tools (like
coccinelle scripts) to address issues with missing namespace imports. A
later patch of this series will introduce such a script 'nsdeps' and a
corresponding make target to automatically add missing
MODULE_IMPORT_NS() definitions to the module's sources. For that it uses
the information provided in the generated .ns_deps files.
Co-developed-by: Martijn Coenen <maco@android.com>
Signed-off-by: Martijn Coenen <maco@android.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Matthias Maennich <maennich@google.com>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
|
|
To avoid excessive usage of EXPORT_SYMBOL_NS(sym, MY_NAMESPACE), where
MY_NAMESPACE will always be the namespace we are exporting to, allow
exporting all definitions of EXPORT_SYMBOL() and friends by defining
DEFAULT_SYMBOL_NAMESPACE.
For example, to export all symbols defined in usb-common into the
namespace USB_COMMON, add a line like this to drivers/usb/common/Makefile:
ccflags-y += -DDEFAULT_SYMBOL_NAMESPACE=USB_COMMON
That is equivalent to changing all EXPORT_SYMBOL(sym) definitions to
EXPORT_SYMBOL_NS(sym, USB_COMMON). Subsequently all symbol namespaces
functionality will apply.
Another way of making use of this feature is to define the namespace
within source or header files similar to how TRACE_SYSTEM defines are
used:
#undef DEFAULT_SYMBOL_NAMESPACE
#define DEFAULT_SYMBOL_NAMESPACE USB_COMMON
Please note that, as opposed to TRACE_SYSTEM, DEFAULT_SYMBOL_NAMESPACE
has to be defined before including include/linux/export.h.
If DEFAULT_SYMBOL_NAMESPACE is defined, a symbol can still be exported
to another namespace by using EXPORT_SYMBOL_NS() and friends with
explicitly specifying the namespace.
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Martijn Coenen <maco@android.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Matthias Maennich <maennich@google.com>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
|
|
If MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS is enabled (default=n), the
requirement for modules to import all namespaces that are used by
the module is relaxed.
Enabling this option effectively allows (invalid) modules to be loaded
while only a warning is emitted.
Disabling this option keeps the enforcement at module loading time and
loading is denied if the module's imports are not satisfactory.
Reviewed-by: Martijn Coenen <maco@android.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Matthias Maennich <maennich@google.com>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
|
|
Add support for symbols that are exported into namespaces. For that,
extract any namespace suffix from the symbol name. In addition, emit a
warning whenever a module refers to an exported symbol without
explicitly importing the namespace that it is defined in. This patch
consistently adds the namespace suffix to symbol names exported into
Module.symvers.
Example warning emitted by modpost in case of the above violation:
WARNING: module ums-usbat uses symbol usb_stor_resume from namespace
USB_STORAGE, but does not import it.
Co-developed-by: Martijn Coenen <maco@android.com>
Signed-off-by: Martijn Coenen <maco@android.com>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Matthias Maennich <maennich@google.com>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
|
|
The EXPORT_SYMBOL_NS() and EXPORT_SYMBOL_NS_GPL() macros can be used to
export a symbol to a specific namespace. There are no _GPL_FUTURE and
_UNUSED variants because these are currently unused, and I'm not sure
they are necessary.
I didn't add EXPORT_SYMBOL_NS() for ASM exports; this patch sets the
namespace of ASM exports to NULL by default. In case of relative
references, it will be relocatable to NULL. If there's a need, this
should be pretty easy to add.
A module that wants to use a symbol exported to a namespace must add a
MODULE_IMPORT_NS() statement to their module code; otherwise, modpost
will complain when building the module, and the kernel module loader
will emit an error and fail when loading the module.
MODULE_IMPORT_NS() adds a modinfo tag 'import_ns' to the module. That
tag can be observed by the modinfo command, modpost and kernel/module.c
at the time of loading the module.
The ELF symbols are renamed to include the namespace with an asm label;
for example, symbol 'usb_stor_suspend' in namespace USB_STORAGE becomes
'usb_stor_suspend.USB_STORAGE'. This allows modpost to do namespace
checking, without having to go through all the effort of parsing ELF and
relocation records just to get to the struct kernel_symbols.
On x86_64 I saw no difference in binary size (compression), but at
runtime this will require a word of memory per export to hold the
namespace. An alternative could be to store namespaced symbols in their
own section and use a separate 'struct namespaced_kernel_symbol' for
that section, at the cost of making the module loader more complex.
Co-developed-by: Martijn Coenen <maco@android.com>
Signed-off-by: Martijn Coenen <maco@android.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Matthias Maennich <maennich@google.com>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
|
|
This change allows growing struct kernel_symbol without wasting bytes to
alignment. It also concretized the alignment of ksymtab entries if
relative references are used for ksymtab entries.
struct kernel_symbol was already implicitly being aligned to the word
size, except on x86_64 and m68k, where it is aligned to 16 and 2 bytes,
respectively.
As far as I can tell there is no requirement for aligning struct
kernel_symbol to 16 bytes on x86_64, but gcc aligns structs to their
size, and the linker aligns the custom __ksymtab sections to the largest
data type contained within, so setting KSYM_ALIGN to 16 was necessary to
stay consistent with the code generated for non-ASM EXPORT_SYMBOL(). Now
that non-ASM EXPORT_SYMBOL() explicitly aligns to word size (8),
KSYM_ALIGN is no longer necessary.
In case of relative references, the alignment has been changed
accordingly to not waste space when adding new struct members.
As for m68k, struct kernel_symbol is aligned to 2 bytes even though the
structure itself is 8 bytes; using a 4-byte alignment shouldn't hurt.
I manually verified the output of the __ksymtab sections didn't change
on x86, x86_64, arm, arm64 and m68k. As expected, the section contents
didn't change, and the ELF section alignment only changed on x86_64 and
m68k. Feedback from other archs more than welcome.
Co-developed-by: Martijn Coenen <maco@android.com>
Signed-off-by: Martijn Coenen <maco@android.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Matthias Maennich <maennich@google.com>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
|
|
Similar to modpost's get_next_modinfo(), introduce get_next_modinfo() in
kernel/module.c to acquire any further values associated with the same
modinfo tag name. That is useful for any tags that have multiple
occurrences (such as 'alias'), but is in particular introduced here as
part of the symbol namespaces patch series to read the (potentially)
multiple namespaces a module is importing.
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Reviewed-by: Martijn Coenen <maco@android.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Matthias Maennich <maennich@google.com>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
|
|
Don't populate the array modes on the stack but instead make it
static const. Makes the object code smaller by 303 bytes.
Before:
text data bss dec hex filename
51240 5008 1312 57560 e0d8 mellanox/mlx4/en_ethtool.o
After:
text data bss dec hex filename
50937 5008 1312 57257 dfa9 mellanox/mlx4/en_ethtool.o
(gcc version 9.2.1, amd64)
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
NLM_F_MULTI must be used only when a NLMSG_DONE message is sent at the end.
In fact, NLMSG_DONE is sent only at the end of a dump.
Libraries like libnl will wait forever for NLMSG_DONE.
Fixes: 949f1e39a617 ("bridge: mdb: notify on router port add and del")
CC: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit 1c2977c09499 ("net/ibmvnic: free reset work of removed device from queue")
adds a } without corresponding { causing build break.
Fixes: 1c2977c09499 ("net/ibmvnic: free reset work of removed device from queue")
Signed-off-by: Michal Suchanek <msuchanek@suse.de>
Reviewed-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Reviewed-by: Juliet Kim <julietk@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue
Jeff Kirsher says:
====================
Intel Wired LAN Driver Updates 2019-09-09
This series contains a variety of cold and hot savoury changes to Intel
drivers. Some of the fixes could be considered for stable even though
the author did not request it.
Hulk Robert cleans up (i.e. removes) a function that has no caller for
the iavf driver.
Radoslaw fixes an issue when there is no link in the VM after the
hypervisor is restored from a low-power state due to the driver not
properly restoring features in the device that had been disabled during
the suspension for ixgbevf.
Kai-Heng Feng modified e1000e to use mod_delayed_work() to help resolve
a hot plug speed detection issue by adding a deterministic 1 second
delay before running watchdog task after an interrupt.
Sasha moves functions around to avoid forward declarations, since the
forward declarations are not necessary for these static functions in
igc. Also added a check for igc during driver probe to validate the NVM
checksum. Cleaned up code defines that were not being used in the igc
driver. Adds support for IP generic transmit checksum offload in the
igc driver.
Updated the iavf kernel documentation by a developer with no life.
Jake provides another fm10k update to a local variable for ease of code
readability.
Mitch fixes the iavf driver to allow the VF to override the MAC address
set by the host, if the VF is in "trusted" mode.
Mauro S. M. Rodrigues provides several changes for i40e driver, first
with resolving hw_dbg usage and referencing a i40e_hw attribute. Also
implemented a debug macro using pr_debug, since the use of netdev_dbg
could cause a NULL pointer dereference during probe. Finally cleaned up
code that is no longer used or needed.
Firo Yang provides a change in the ixgbe driver to ensure we sync the
first fragment unconditionally to help resolve an issue seen in the XEN
environment when the upper network stack could receive an incomplete
network packet.
Mariusz adds a missing device to the i40e PCI table in the driver.
v2: Mauro S. M. Rodrigues updated patches 10 & 11 of the series based on
feedback from Jakub Kicinski. Also updated patch 13 description so
that the "Fixes:" tag was no wrapped.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If the build user has the CFLAGS variable set in their environment,
objtool blindly appends to it, which can cause unexpected behavior.
Clobber CFLAGS to ensure consistent objtool compilation behavior.
Reported-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Tested-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/83a276df209962e6058fcb6c615eef9d401c21bc.1567121311.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
processes as well
Add emulation (spoofing) of the SGDT, SIDT, and SMSW instructions for 64-bit
processes.
Wine users have encountered a number of 64-bit Windows games that use
these instructions (particularly SGDT), and were crashing when run on
UMIP-enabled systems.
Originally-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Signed-off-by: Brendan Shanks <bshanks@codeweavers.com>
Reviewed-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Reviewed-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190905232222.14900-1-bshanks@codeweavers.com
[ Minor edits: capitalization, added 'spoofing' wording. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
drm_gem_reservation_object_wait() returns 0 if it succeeds and -ETIME
if it timeouts, but lima driver assumed that 0 is error.
Cc: stable@vger.kernel.org
Fixes: a1d2a6339961e ("drm/lima: driver for ARM Mali4xx GPUs")
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190908024800.23229-1-anarsoul@gmail.com
|
|
To support the link with drain, we need to do two parts.
There is an sqes:
0 1 2 3 4 5 6
+-----+-----+-----+-----+-----+-----+-----+
| N | L | L | L+D | N | N | N |
+-----+-----+-----+-----+-----+-----+-----+
First, we need to ensure that the io before the link is completed,
there is a easy way is set drain flag to the link list's head, so
all subsequent io will be inserted into the defer_list.
+-----+
(0) | N |
+-----+
| (2) (3) (4)
+-----+ +-----+ +-----+ +-----+
(1) | L+D | --> | L | --> | L+D | --> | N |
+-----+ +-----+ +-----+ +-----+
|
+-----+
(5) | N |
+-----+
|
+-----+
(6) | N |
+-----+
Second, ensure that the following IO will not be completed first,
an easy way is to create a mirror of drain io and insert it into
defer_list, in this way, as long as drain io is not processed, the
following io in the defer_list will not be actively process.
+-----+
(0) | N |
+-----+
| (2) (3) (4)
+-----+ +-----+ +-----+ +-----+
(1) | L+D | --> | L | --> | L+D | --> | N |
+-----+ +-----+ +-----+ +-----+
|
+-----+
('3) | D | <== This is a shadow of (3)
+-----+
|
+-----+
(5) | N |
+-----+
|
+-----+
(6) | N |
+-----+
Signed-off-by: Jackie Liu <liuyun01@kylinos.cn>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Sqo_thread will get sqring in batches, which will cause
ctx->cached_sq_head to be added in batches. if one of these
sqes is set with the DRAIN flag, then he will never get a
chance to process, and finally sqo_thread will not exit.
Fixes: de0617e4671 ("io_uring: add support for marking commands as draining")
Signed-off-by: Jackie Liu <liuyun01@kylinos.cn>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add all DaVinci boards to multi_v5_defconfig.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add modifications necessary to make davinci part of the ARM v5
multiplatform build.
Move the arch-specific configuration out of arch/arm/Kconfig and
into mach-davinci/Kconfig. Remove the sub-menu for DaVinci
implementations (they'll be visible directly under the system type.
Select all necessary options not already selected by ARCH_MULTI_V5.
Update davinci_all_defconfig. Explicitly include the mach-specific
headers in mach-davinci/Makefile.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
ARM architected timer can be used together with Exynos MultiCore Timer
driver, so enable support for it. Support for ARM architected timers is
essential for enabling proper KVM support.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
S3C6410 system restart is triggered by watchdog reset.
Cc: <stable@vger.kernel.org>
Fixes: 9f55342cc2de ("ARM: dts: s3c64xx: Fix infinite interrupt in soft mode")
Signed-off-by: Lihua Yao <ylhuajnu@outlook.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
Add I40E_DEV_ID_10G_BASE_T_BC to i40e_pci_tbl
Signed-off-by: Mariusz Stachura <mariusz.stachura@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
Add IP generic TX checksum offload functionality.
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
In Xen environment, if Xen-swiotlb is enabled, ixgbe driver
could possibly allocate a page, DMA memory buffer, for the first
fragment which is not suitable for Xen-swiotlb to do DMA operations.
Xen-swiotlb have to internally allocate another page for doing DMA
operations. This mechanism requires syncing the data from the internal
page to the page which ixgbe sends to upper network stack. However,
since commit f3213d932173 ("ixgbe: Update driver to make use of DMA
attributes in Rx path"), the unmap operation is performed with
DMA_ATTR_SKIP_CPU_SYNC. As a result, the sync is not performed.
Since the sync isn't performed, the upper network stack could receive
a incomplete network packet. By incomplete, it means the linear data
on the first fragment(between skb->head and skb->end) is invalid. So
we have to copy the data from the internal xen-swiotlb page to the page
which ixgbe sends to upper network stack through the sync operation.
More details from Alexander Duyck:
Specifically since we are mapping the frame with
DMA_ATTR_SKIP_CPU_SYNC we have to unmap with that as well. As a result
a sync is not performed on an unmap and must be done manually as we
skipped it for the first frag. As such we need to always sync before
possibly performing a page unmap operation.
Fixes: f3213d932173 ("ixgbe: Update driver to make use of DMA attributes in Rx path")
Signed-off-by: Firo Yang <firo.yang@suse.com>
Reviewed-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
Since commit
'5098850c9b9b ("i40e/i40evf: i40e_register.h updates")'
it is no longer possible to trigger an EMP Reset from debugfs, but it's
possible to request it either way, to end up with a bad reset request:
echo empr > /sys/kernel/debug/i40e/0002\:01\:00.1/command
i40e 0002:01:00.1: debugfs: forcing EMPR
i40e 0002:01:00.1: bad reset request 0x00010000
So let's remove this piece of code and show the available valid commands
as it is when any invalid command is issued.
Signed-off-by: "Mauro S. M. Rodrigues" <maurosr@linux.vnet.ibm.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
There are several uses of hw_dbg in the code, producing no output. This
patch implements it using dev_debug.
Initially the intention was to implement it using netdev_dbg, analogously
to what is done in ixgbe for instance. That approach was avoided due to
some early usages of hw_dbg, like i40e_pf_reset, before the VSI structure
initialization causing NULL pointer dereference during the driver probe if
the debug messages were turned on as soon as the module is probed.
v2:
- Use dev_dbg instead of pr_debug, and take advantage of dev_name
instead of crafting pretty much the same device name locally as suggested
by Jakub Kicinski.
Signed-off-by: "Mauro S. M. Rodrigues" <maurosr@linux.vnet.ibm.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
The device is officially called "Relative state of charge" (RSOC).
At the same time add the missing DEVID from the name.
Signed-off-by: Kristian Klausen <kristian@klausen.dk>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
At the same time add a comment explaining what it is used for.
Signed-off-by: Kristian Klausen <kristian@klausen.dk>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"This is obviouly very late, containing three small and simple driver
specific fixes.
The main one is the TWL fix, this fixes issues with cpufreq on the
PMICs used with BeagleBoard generation OMAP SoCs which had been broken
due to changes in the generic OPP code exposing a bug in the regulator
driver for these devices causing them to think that OPPs weren't
supported on the system.
Sorry about sending this so late, I hadn't registered that the TWL
issue manifested in cpufreq"
* tag 'regulator-fix-v5.3-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: twl: voltage lists for vdd1/2 on twl4030
regulator: act8945a-regulator: fix ldo register addresses in set_mode hook
regulator: slg51000: Fix a couple NULL vs IS_ERR() checks
|
|
The mentioned function references a i40e_hw attribute, as parameter for
hw_dbg, but it doesn't exist in the function scope.
Fixes it by changing parameters from i40e_hmc_info to i40e_hw which can
retrieve the necessary i40e_hmc_info.
v2:
- Fixed reverse xmas tree code style issue as suggested by Jakub Kicinski
Signed-off-by: "Mauro S. M. Rodrigues" <maurosr@linux.vnet.ibm.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
hyp_alternate_select() is now completely unused. Goodbye.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Christoffer Dall <christoffer.dall@arm.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
|
