| Age | Commit message (Collapse) | Author |
|---|
|
We recently added a kfree() after the end of the loop:
if (retries == RETRIES) {
kfree(reply);
return -EINVAL;
}
There are two problems. First the test is wrong and because retries
equals RETRIES if we succeed on the last iteration through the loop.
Second if we fail on the last iteration through the loop then the kfree
is a double free.
When you're reading this code, please note the break statement at the
end of the while loop. This patch changes the loop so that if it's not
successful then "reply" is NULL and we can test for that afterward.
Cc: <stable@vger.kernel.org>
Fixes: 6b7c3b86f0b6 ("drm/vmwgfx: fix memory leak when too many retries have occurred")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
|
|
The sony driver is not properly cleaning up from potential failures in
sony_input_configured. Currently it calls hid_hw_stop, while hid_connect
is still running. This is not a good idea, instead hid_hw_stop should
be moved to sony_probe. Similar changes were recently made to Logitech
drivers, which were also doing improper cleanup.
Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
CC: stable@vger.kernel.org
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Björn Töpel says:
====================
This is a four patch series of various barrier, {READ, WRITE}_ONCE
cleanups in the AF_XDP socket code. More details can be found in the
corresponding commit message. Previous revisions: v1 [4] and v2 [5].
For an AF_XDP socket, most control plane operations are done under the
control mutex (struct xdp_sock, mutex), but there are some places
where members of the struct is read outside the control mutex. The
dev, queue_id members are set in bind() and cleared at cleanup. The
umem, fq, cq, tx, rx, and state member are all assigned in various
places, e.g. bind() and setsockopt(). When the members are assigned,
they are protected by the control mutex, but since they are read
outside the mutex, a WRITE_ONCE is required to avoid store-tearing on
the read-side.
Prior the state variable was introduced by Ilya, the dev member was
used to determine whether the socket was bound or not. However, when
dev was read, proper SMP barriers and READ_ONCE were missing. In order
to address the missing barriers and READ_ONCE, we start using the
state variable as a point of synchronization. The state member
read/write is paired with proper SMP barriers, and from this follows
that the members described above does not need READ_ONCE statements if
used in conjunction with state check.
To summarize: The members struct xdp_sock members dev, queue_id, umem,
fq, cq, tx, rx, and state were read lock-less, with incorrect barriers
and missing {READ, WRITE}_ONCE. After this series umem, fq, cq, tx,
rx, and state are read lock-less. When these members are updated,
WRITE_ONCE is used. When read, READ_ONCE are only used when read
outside the control mutex (e.g. mmap) or, not synchronized with the
state member (XSK_BOUND plus smp_rmb())
[1] https://lore.kernel.org/bpf/beef16bb-a09b-40f1-7dd0-c323b4b89b17@iogearbox.net/
[2] https://lwn.net/Articles/793253/
[3] https://github.com/google/ktsan/wiki/READ_ONCE-and-WRITE_ONCE
[4] https://lore.kernel.org/bpf/20190822091306.20581-1-bjorn.topel@gmail.com/
[5] https://lore.kernel.org/bpf/20190826061053.15996-1-bjorn.topel@gmail.com/
v2->v3:
Minor restructure of commits.
Improve cover and commit messages. (Daniel)
v1->v2:
Removed redundant dev check. (Jonathan)
====================
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
When accessing the members of an XDP socket, the control mutex should
be held. This commit fixes that.
Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Fixes: a36b38aa2af6 ("xsk: add sock_diag interface for AF_XDP")
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Prior the state variable was introduced by Ilya, the dev member was
used to determine whether the socket was bound or not. However, when
dev was read, proper SMP barriers and READ_ONCE were missing. In order
to address the missing barriers and READ_ONCE, we start using the
state variable as a point of synchronization. The state member
read/write is paired with proper SMP barriers, and from this follows
that the members described above does not need READ_ONCE if used in
conjunction with state check.
In all syscalls and the xsk_rcv path we check if state is
XSK_BOUND. If that is the case we do a SMP read barrier, and this
implies that the dev, umem and all rings are correctly setup. Note
that no READ_ONCE are needed for these variable if used when state is
XSK_BOUND (plus the read barrier).
To summarize: The members struct xdp_sock members dev, queue_id, umem,
fq, cq, tx, rx, and state were read lock-less, with incorrect barriers
and missing {READ, WRITE}_ONCE. Now, umem, fq, cq, tx, rx, and state
are read lock-less. When these members are updated, WRITE_ONCE is
used. When read, READ_ONCE are only used when read outside the control
mutex (e.g. mmap) or, not synchronized with the state member
(XSK_BOUND plus smp_rmb())
Note that dev and queue_id do not need a WRITE_ONCE or READ_ONCE, due
to the introduce state synchronization (XSK_BOUND plus smp_rmb()).
Introducing the state check also fixes a race, found by syzcaller, in
xsk_poll() where umem could be accessed when stale.
Suggested-by: Hillf Danton <hdanton@sina.com>
Reported-by: syzbot+c82697e3043781e08802@syzkaller.appspotmail.com
Fixes: 77cd0d7b3f25 ("xsk: add support for need_wakeup flag in AF_XDP rings")
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
The umem member of struct xdp_sock is read outside of the control
mutex, in the mmap implementation, and needs a WRITE_ONCE to avoid
potential store-tearing.
Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Fixes: 423f38329d26 ("xsk: add umem fill queue support and mmap")
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Use WRITE_ONCE when doing the store of tx, rx, fq, and cq, to avoid
potential store-tearing. These members are read outside of the control
mutex in the mmap implementation.
Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Fixes: 37b076933a8e ("xsk: add missing write- and data-dependency barrier")
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
The problem can be seen in the following two tests:
0: (bf) r3 = r10
1: (55) if r3 != 0x7b goto pc+0
2: (7a) *(u64 *)(r3 -8) = 0
3: (79) r4 = *(u64 *)(r10 -8)
..
0: (85) call bpf_get_prandom_u32#7
1: (bf) r3 = r10
2: (55) if r3 != 0x7b goto pc+0
3: (7b) *(u64 *)(r3 -8) = r0
4: (79) r4 = *(u64 *)(r10 -8)
When backtracking need to mark R4 it will mark slot fp-8.
But ST or STX into fp-8 could belong to the same block of instructions.
When backtracing is done the parent state may have fp-8 slot
as "unallocated stack". Which will cause verifier to warn
and incorrectly reject such programs.
Writes into stack via non-R10 register are rare. llvm always
generates canonical stack spill/fill.
For such pathological case fall back to conservative precision
tracking instead of rejecting.
Reported-by: syzbot+c8d66267fd2b5955287e@syzkaller.appspotmail.com
Fixes: b5dc0163d8fd ("bpf: precise scalar_value tracking")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Add two tests to check that stack slot marking during backtracking
doesn't trigger 'spi > allocated_stack' warning.
One test is using BPF_ST insn. Another is using BPF_STX.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
When using the macro le32_to_cpu(x), we need to correctly convert x to be
__le32 in case it is defined as u32 variable.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Tomer Tayar <ttayar@habana.ai>
|
|
If the initialization of a device failed, the driver prints an error
message with the id of the device. The device index on the file system is
that id divided by 2.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Omer Shpigelman <oshpigelman@habana.ai>
|
|
We want to stop using the acronym KMD. Therefore, replace all locations
(except for register names we can't modify) where KMD is written to other
terms such as "Linux kernel driver" or "Host kernel driver", etc.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Omer Shpigelman <oshpigelman@habana.ai>
|
|
To allow the user to use a custom file for the HWMON lm-sensors library
per card type, the driver needs to register the HWMON sensors with the
specific card type name.
The card name is supplied by the F/W running on the device. If the F/W is
old and doesn't supply a card name, a default card name is displayed as
the sensors group name.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Omer Shpigelman <oshpigelman@habana.ai>
|
|
Add a new opcode to INFO IOCTL to retrieve aggregate H/W events. i.e. the
events counters are NOT cleared upon device reset, but count from the
loading of the driver.
Add the code to support it in the device event handling function.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Omer Shpigelman <oshpigelman@habana.ai>
|
|
Users and sysadmins usually want to know what is the device utilization as
a level 0 indication if they are efficiently using the device.
Add a new opcode to the INFO IOCTL that will return the device utilization
over the last period of 100-1000ms. The return value is 0-100,
representing as percentage the total utilization rate.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Omer Shpigelman <oshpigelman@habana.ai>
|
|
The Coresight timestamp is enabled for a specific debug session using
the HL_DEBUG_OP_TIMESTAMP opcode of the debug IOCTL.
In order to have a perpetual timestamp that would be comparable between
various debug sessions, this patch moves the timestamp enablement to be
part of the HW initialization.
The HL_DEBUG_OP_TIMESTAMP opcode turns to be deprecated and shouldn't be
used. Old user-space that will call it won't see any change in the
behavior of the debug session.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
When looking at kernel log messages and when debugging user applications,
we only see the queue id. This patch explicitly set the queue id in the
queue enumeration which will be helpful for finding the queue name when we
have its id.
Signed-off-by: Dotan Barak <dbarak@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
Now that we don't print the queue testing messages, we need to print when
the reset is finished so whoever looks at the kernel log will know the
reset process was finished successfully and the driver is not stuck.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In some files the driver uses __le32_to_cpu while in other it uses
le32_to_cpu. Replace all __le32_to_cpu instances with le32_to_cpu for
consistency.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
In some files the code use __cpu_to_le32/64 while in other it use
cpu_to_le32/64. Replace all __cpu_to_le32/64 instances with
cpu_to_le32/64 for consistency.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
The HW IP information is relevant even if the device is disabled or in
reset, so always handle the corresponding INFO IOCTL opcode.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
The char devices are currently exposed to user before the device and
driver initialization are done.
This patch moves the cdev and device adding to the system to the end of
the initialization sequence, while keeping the creation of the
structures at the beginning to allow the usage of dev_*().
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
This patch improves the security in the Debug IOCTL.
It adds checks that:
- The register index value is in the allowed range for all opcodes.
- The event types number is in the allowed range in SPMU enable.
- The events number is in the allowed range in SPMU disable.
Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
This patch fixes a possible kernel crash when a user provides a too small
input structure to the Debug IOCTL.
The fix sets a default input structure and copies to it the user data.
In case the user provided as input a too small structure, the code will
use the default values taken from the default structure.
Note that in contrary to the input structure, the user can provide an
output structure with changing size or no size at all. Therefore the user
output structure validation is already done in the Debug logic later on.
Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
Add a meaningful name to the general PSOC application status register
which better describes its usage in keeping the HW state.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
The PSOC scratch-pad registers are used for communication with the
device CPU. This patch adds new definitions for these registers which
are more descriptive than their general names.
The new set of definitions also gathers and documents the current usage
of the scratch-pad registers by the driver and the device CPU.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
This patch changes the driver to create two char devices for each ASIC
it discovers. This is done to allow system/monitoring applications to
query the device for stats, information, idle state and more, while also
allowing the deep-learning application to send work to the ASIC.
One char device is the original device, hlX. IOCTL calls through this
device file can perform any task on the device (compute, memory, queries).
The open function for this device will fail if it was called before but
the file-descriptor it created was not completely released yet (the
release callback function is not called from the kernel until all
instances of that FD are closed). The driver needs to keep this behavior
to support backward compatibility with existing userspace, which count
that the open will fail if the device is "occupied".
The second char device is called "hl_controlDx", where x is the same index
of the main device with a minor number of the original char device + 1.
Applications that open this device can only call the INFO IOCTL. There is
no limitation on the number of applications opening this device.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch re-factors the device_setup_cdev() function to make it more
generic. It doesn't manipulate members of the driver's internal device
structure but instead works only on the arguments that are sent to it.
This is in preparation for using this function to create an additional
char device per ASIC.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch adds a new list to the driver's device structure. The list will
keep the file private data structures that the driver creates when a user
process opens the device.
This change is needed because it is useless to try to count how many FD
are open. Instead, track our own private data structure per open file and
once it is released, remove it from the list. As long as the list is not
empty, it means we have a user that can do something with our device.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch renames the "user_ctx" field in the device structure to
"compute_ctx". This better reflects the meaning of this context.
In addition, we also check in the ctx_fini() that the debug mode should be
disabled only if the context being destroyed is the compute context. This
has no effect right now as we only have a single process and a single
context, but this makes the code more ready for multiple process support.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When the user query the dram usage of a context, show it the dram usage of
its context, not the user context that is currently running on the device.
This has no effect right now as we only have a single process and a single
context, but this makes the code more ready for multiple process support.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch calls the kill user process function after we rollback the
in-flight CSs. This is because the user process can't be closed while
there are open CSs. Therefore, there is no point of sending it a SIGKILL
before we do the rollback CS part.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch adds a field to the context's structure that will hold a unique
handle for the context.
This will be needed when the user will create the context.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Instead of using to_pci_dev + pci_get_drvdata,
use dev_get_drvdata to make code simpler.
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
The ability of setting power management properties by the system
administrator (through sysfs properties) is only relevant for the GOYA
ASIC. Therefore, move the relevant sysfs properties to the GOYA sysfs
specific file, to make the properties appear in sysfs only for GOYA cards.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Omer Shpigelman <oshpigelman@habana.ai>
|
|
In the driver timeout functions, we give the simulator a factor of 10
in the timeout. This was necessary when the requested timeout is small
but if it was a few seconds, this can result in a very large timeout which
is unnecessary.
This patch caps the maximum timeout of the simulator to 10 seconds, which
is our largest timeout in the code. That is more then enough for anything
the simulator is doing.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Omer Shpigelman <oshpigelman@habana.ai>
|
|
When rejecting CS because of too many in-flight CS, print a debug message
about it as it useful to know when the user is debugging (it indicates a
back-pressure from the driver as the device is not fast enough to consume
the CS)
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Omer Shpigelman <oshpigelman@habana.ai>
|
|
This patch adds some in-code documentation on the different opcodes of the
INFO IOCTL.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Omer Shpigelman <oshpigelman@habana.ai>
|
|
This property has attempted to show the number of open file descriptors on
the device. This was a stupid and futile attempt so remove this property
completely.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
Currently, we don't add headroom to the handle in ixgbe_zca_free,
ixgbe_alloc_buffer_slow_zc and ixgbe_alloc_buffer_zc. The addition of the
headroom to the handle was removed in
commit d8c3061e5edd ("ixgbe: modify driver for handling offsets"), which
will break things when headroom isvnon-zero. This patch fixes this and uses
xsk_umem_adjust_offset to add it appropritely based on the mode being run.
Fixes: d8c3061e5edd ("ixgbe: modify driver for handling offsets")
Reported-by: Bjorn Topel <bjorn.topel@intel.com>
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Currently, we don't add headroom to the handle in i40e_zca_free,
i40e_alloc_buffer_slow_zc and i40e_alloc_buffer_zc. The addition of the
headroom to the handle was removed in
commit 2f86c806a8a8 ("i40e: modify driver for handling offsets"), which
will break things when headroom is non-zero. This patch fixes this and uses
xsk_umem_adjust_offset to add it appropritely based on the mode being run.
Fixes: 2f86c806a8a8 ("i40e: modify driver for handling offsets")
Reported-by: Bjorn Topel <bjorn.topel@intel.com>
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Not all objects have an update operation. If the object type doesn't
implement an update operation and the user tries to update it will hit
EOPNOTSUPP.
Fixes: d62d0ba97b58 ("netfilter: nf_tables: Introduce stateful object update operation")
Signed-off-by: Fernando Fernandez Mancera <ffmancera@riseup.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
According to the Hardware Manual Errata for Rev. 1.50 of April 10, 2019,
cache snoop transactions for page table walk requests are not supported
on R-Car Gen3.
Hence, this patch removes setting these fields in the IMTTBCR register,
since it will have no effect, and adds comments to the register bit
definitions, to make it clear they apply to R-Car Gen2 only.
Signed-off-by: Hai Nguyen Pham <hai.pham.ud@renesas.com>
[geert: Reword, add comments]
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
When CONFIG_DEBUG_PER_CPU_MAPS=y we validate that the @node argument of
cpumask_of_node() is a valid node_id. It however forgets to check for
negative numbers. Fix this by explicitly casting to unsigned int.
(unsigned)node >= nr_node_ids
verifies: 0 <= node < nr_node_ids
Also ammend the error message to match the condition.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Yunsheng Lin <linyunsheng@huawei.com>
Link: https://lkml.kernel.org/r/20190903075352.GY2369@hirez.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Move the recently added IMTTBCR_SL0_TWOBIT_* definitions up, to make
sure all IMTTBCR register bit definitions are sorted by decreasing bit
index. Add comments to make it clear that they exist on R-Car Gen3
only.
Fixes: c295f504fb5a38ab ("iommu/ipmmu-vmsa: Allow two bit SL0")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Add the clock tree definition for the new RK3308 SoC.
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The UPS feature only works for runtime suspend, so UPS flags only
need to be set before enabling runtime suspend. Therefore, I create
a struct to record relative information, and use it before runtime
suspend.
All chips could record such information, even though not all of
them support the feature of UPS. Then, some functions could be
combined.
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Move the static keyword to the front of declaration of g_dsaf_mode_match,
and resolve the following compiler warning that can be seen when building
with warnings enabled (W=1):
drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c:27:1: warning:
‘static’ is not at beginning of declaration [-Wold-style-declaration]
Signed-off-by: Krzysztof Wilczynski <kw@linux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Move the static keyword to the front of declaration of iwarp_state_names,
and resolve the following compiler warning that can be seen when building
with warnings enabled (W=1):
drivers/net/ethernet/qlogic/qed/qed_iwarp.c:385:1: warning:
‘static’ is not at beginning of declaration [-Wold-style-declaration]
Also, resolve checkpatch.pl script warning:
WARNING: static const char * array should probably be
static const char * const
Signed-off-by: Krzysztof Wilczynski <kw@linux.com>
Acked-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When creating a v4 route that uses a v6 nexthop from a nexthop group.
Allow the kernel to properly send the nexthop as v6 via the RTA_VIA
attribute.
Broken behavior:
$ ip nexthop add via fe80::9 dev eth0
$ ip nexthop show
id 1 via fe80::9 dev eth0 scope link
$ ip route add 4.5.6.7/32 nhid 1
$ ip route show
default via 10.0.2.2 dev eth0
4.5.6.7 nhid 1 via 254.128.0.0 dev eth0
10.0.2.0/24 dev eth0 proto kernel scope link src 10.0.2.15
$
Fixed behavior:
$ ip nexthop add via fe80::9 dev eth0
$ ip nexthop show
id 1 via fe80::9 dev eth0 scope link
$ ip route add 4.5.6.7/32 nhid 1
$ ip route show
default via 10.0.2.2 dev eth0
4.5.6.7 nhid 1 via inet6 fe80::9 dev eth0
10.0.2.0/24 dev eth0 proto kernel scope link src 10.0.2.15
$
v2, v3: Addresses code review comments from David Ahern
Fixes: dcb1ecb50edf (“ipv4: Prepare for fib6_nh from a nexthop object”)
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
