| Age | Commit message (Collapse) | Author |
|---|
|
All entries in 'rds_ib_stat_names' are stringified versions
of the corresponding "struct rds_ib_statistics" element
without the "s_"-prefix.
Fix entry 'ib_evt_handler_call' to do the same.
Fixes: f4f943c958a2 ("RDS: IB: ack more receive completions to improve performance")
Signed-off-by: Gerd Rausch <gerd.rausch@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When tcf_block_get() fails in sfb_init(), q->qdisc is still a NULL
pointer which leads to a crash in sfb_destroy(). Similar for
sch_dsmark.
Instead of fixing each separately, Linus suggested to just accept
NULL pointer in qdisc_put(), which would make callers easier.
(For sch_dsmark, the bug probably exists long before commit
6529eaba33f0.)
Fixes: 6529eaba33f0 ("net: sched: introduce tcf block infractructure")
Reported-by: syzbot+d5870a903591faaca4ae@syzkaller.appspotmail.com
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The DSA core, DSA taggers and DSA drivers all make use of
module_init(). Hence they get initialised at device_initcall() time.
The ordering is non-deterministic. It can be a DSA driver is bound to
a device before the needed tag driver has been initialised, resulting
in the message:
No tagger for this switch
Rather than have this be fatal, return -EPROBE_DEFER so that it is
tried again later once all the needed drivers have been loaded.
Fixes: d3b8c04988ca ("dsa: Add boilerplate helper to register DSA tag driver modules")
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The test implemented by some_qdisc_is_busy() is somewhat loosy for
NOLOCK qdisc, as we may hit the following scenario:
CPU1 CPU2
// in net_tx_action()
clear_bit(__QDISC_STATE_SCHED...);
// in some_qdisc_is_busy()
val = (qdisc_is_running(q) ||
test_bit(__QDISC_STATE_SCHED,
&q->state));
// here val is 0 but...
qdisc_run(q)
// ... CPU1 is going to run the qdisc next
As a conseguence qdisc_run() in net_tx_action() can race with qdisc_reset()
in dev_qdisc_reset(). Such race is not possible for !NOLOCK qdisc as
both the above bit operations are under the root qdisc lock().
After commit 021a17ed796b ("pfifo_fast: drop unneeded additional lock on dequeue")
the race can cause use after free and/or null ptr dereference, but the root
cause is likely older.
This patch addresses the issue explicitly checking for deactivation under
the seqlock for NOLOCK qdisc, so that the qdisc_run() in the critical
scenario becomes a no-op.
Note that the enqueue() op can still execute concurrently with dev_qdisc_reset(),
but that is safe due to the skb_array() locking, and we can't avoid that
for NOLOCK qdiscs.
Fixes: 021a17ed796b ("pfifo_fast: drop unneeded additional lock on dequeue")
Reported-by: Li Shuang <shuali@redhat.com>
Reported-and-tested-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This helps preventing a BUG* or WARN* in some static inline from
preventing that (or one of its callers) being inlined, so should allow
gcc to make better informed inlining decisions.
For example, with gcc 9.2, tcp_fastopen_no_cookie() vanishes from
net/ipv4/tcp_fastopen.o. It does not itself have any BUG or WARN, but
it calls dst_metric() which has a WARN_ON_ONCE - and despite that
WARN_ON_ONCE vanishing since the condition is compile-time false,
dst_metric() is apparently sufficiently "large" that when it gets
inlined into tcp_fastopen_no_cookie(), the latter becomes too large
for inlining.
Overall, if one asks size(1), .text decreases a little and .data
increases by about the same amount (x86-64 defconfig)
$ size vmlinux.{before,after}
text data bss dec hex filename
19709726 5202600 1630280 26542606 195020e vmlinux.before
19709330 5203068 1630280 26542678 1950256 vmlinux.after
while bloat-o-meter says
add/remove: 10/28 grow/shrink: 103/51 up/down: 3669/-2854 (815)
...
Total: Before=14783683, After=14784498, chg +0.01%
Acked-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
|
|
Most, if not all, uses of the alternative* family just provide one or
two instructions in .text, but the string literal can be quite large,
causing gcc to overestimate the size of the generated code. That in
turn affects its decisions about inlining of the function containing
the alternative() asm statement.
New enough versions of gcc allow one to overrule the estimated size by
using "asm inline" instead of just "asm". So replace asm by the helper
asm_inline, which for older gccs just expands to asm.
Acked-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
|
|
This adds an asm_inline macro which expands to "asm inline" [1] when
the compiler supports it. This is currently gcc 9.1+, gcc 8.3
and (once released) gcc 7.5 [2]. It expands to just "asm" for other
compilers.
Using asm inline("foo") instead of asm("foo") overrules gcc's
heuristic estimate of the size of the code represented by the asm()
statement, and makes gcc use the minimum possible size instead. That
can in turn affect gcc's inlining decisions.
I wasn't sure whether to make this a function-like macro or not - this
way, it can be combined with volatile as
asm_inline volatile()
but perhaps we'd prefer to spell that
asm_inline_volatile()
anyway.
The Kconfig logic is taken from an RFC patch by Masahiro Yamada [3].
[1] Technically, asm __inline, since both inline and __inline__
are macros that attach various attributes, making gcc barf if one
literally does "asm inline()". However, the third spelling __inline is
available for referring to the bare keyword.
[2] https://lore.kernel.org/lkml/20190907001411.GG9749@gate.crashing.org/
[3] https://lore.kernel.org/lkml/1544695154-15250-1-git-send-email-yamada.masahiro@socionext.com/
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
|
|
The spellings __inline and __inline__ should be reserved for uses
where one really wants to refer to the inline keyword, regardless of
whether or not the spelling "inline" has been #defined to something
else. Due to use of __inline__ in uapi headers, we can't easily get
rid of the definition of __inline__. However, almost all users of
__inline have been converted to inline, so we can get rid of that
#define.
The exception is include/acpi/platform/acintel.h. However, that header
is only included when using the intel compiler (does anybody actually
build the kernel with that?), and the ACPI_INLINE macro is only used
in the definition of utterly trivial stub functions, where I doubt a
small change of semantics (lack of __gnu_inline) changes anything.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
[Fix trivial typo in message]
Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
|
|
Currently, compiler_types.h #defines __inline as inline (and further
#defines inline to automatically attach some attributes), so this does
not change functionality. It serves as preparation for removing the
#define of __inline.
While at it, also remove the __attribute__((unused)) - it's already
included in the definition of the inline macro, and "open-coded"
__attribute__(()) should be avoided.
Since commit a95b37e20db9 (kbuild: get <linux/compiler_types.h> out of
<linux/kconfig.h>), compiler_types.h is automatically included by all
kernel C code - i.e., the definition of inline including the unused
attribute is guaranteed to be in effect whenever ZSTD_STATIC is
expanded.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
|
|
Currently, __inline is #defined as inline in compiler_types.h, so this
should not change functionality. It is preparation for removing said
#define.
While at it, change some "inline static" to the customary "static
inline" order.
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
|
|
Minor overlapping changes in the btusb and ixgbe drivers.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
|
|
|
|
|
|
|
|
Remove excess semicolon after closing parenthesis.
Signed-off-by: Saiyam Doshi <saiyamdoshi.in@gmail.com>
Link: https://lore.kernel.org/r/20190914031133.GA28447@SD
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In the Distribution Kernels track at Linux Plumbers Conference there
was some discussion around the difficulty of making kernel builds
reproducible.
This is a solved problem, but the solutions don't appear to be
documented in one place. This document lists the issues I know about
and the settings needed to ensure reproducibility.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Pull kvm fixes from Paolo Bonzini:
"The main change here is a revert of reverts. We recently simplified
some code that was thought unnecessary; however, since then KVM has
grown quite a few cond_resched()s and for that reason the simplified
code is prone to livelocks---one CPUs tries to empty a list of guest
page tables while the others keep adding to them. This adds back the
generation-based zapping of guest page tables, which was not
unnecessary after all.
On top of this, there is a fix for a kernel memory leak and a couple
of s390 fixlets as well"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86/mmu: Reintroduce fast invalidate/zap for flushing memslot
KVM: x86: work around leak of uninitialized stack contents
KVM: nVMX: handle page fault in vmread
KVM: s390: Do not leak kernel stack data in the KVM_S390_INTERRUPT ioctl
KVM: s390: kvm_s390_vm_start_migration: check dirty_bitmap before using it as target for memset()
|
|
Some workloads can require far more than 4K oustanding entries. For
example memcached can have ~300K sockets over ~40 cores. Bumping the max
to 32K seems to work pretty well.
Reported-by: Dan Melnic <dmm@fb.com>
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull virtio fix from Michael Tsirkin:
"A last minute revert
The 32-bit build got broken by the latest defence in depth patch.
Revert and we'll try again in the next cycle"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
Revert "vhost: block speculation of translated descriptors"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fix from Paul Walmsley:
"Last week, Palmer and I learned that there was an error in the RISC-V
kernel image header format that could make it less compatible with the
ARM64 kernel image header format. I had missed this error during my
original reviews of the patch.
The kernel image header format is an interface that impacts
bootloaders, QEMU, and other user tools. Those packages must be
updated to align with whatever is merged in the kernel. We would like
to avoid proliferating these image formats by keeping the RISC-V
header as close as possible to the existing ARM64 header. Since the
arch/riscv patch that adds support for the image header was merged
with our v5.3-rc1 pull request as commit 0f327f2aaad6a ("RISC-V: Add
an Image header that boot loader can parse."), we think it wise to try
to fix this error before v5.3 is released.
The fix itself should be backwards-compatible with any project that
has already merged support for premature versions of this interface.
It primarily involves ensuring that the RISC-V image header has
something useful in the same field as the ARM64 image header"
* tag 'riscv/for-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: modify the Image header to improve compatibility with the ARM64 header
|
|
This reverts commit a89db445fbd7f1f8457b03759aa7343fa530ef6b.
I was hasty to include this patch, and it breaks the build on 32 bit.
Defence in depth is good but let's do it properly.
Cc: stable@vger.kernel.org
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Pull networking fixes from David Miller:
1) Don't corrupt xfrm_interface parms before validation, from Nicolas
Dichtel.
2) Revert use of usb-wakeup in btusb, from Mario Limonciello.
3) Block ipv6 packets in bridge netfilter if ipv6 is disabled, from
Leonardo Bras.
4) IPS_OFFLOAD not honored in ctnetlink, from Pablo Neira Ayuso.
5) Missing ULP check in sock_map, from John Fastabend.
6) Fix receive statistic handling in forcedeth, from Zhu Yanjun.
7) Fix length of SKB allocated in 6pack driver, from Christophe
JAILLET.
8) ip6_route_info_create() returns an error pointer, not NULL. From
Maciej Żenczykowski.
9) Only add RDS sock to the hashes after rs_transport is set, from
Ka-Cheong Poon.
10) Don't double clean TX descriptors in ixgbe, from Ilya Maximets.
11) Presence of transmit IPSEC offload in an SKB is not tested for
correctly in ixgbe and ixgbevf. From Steffen Klassert and Jeff
Kirsher.
12) Need rcu_barrier() when register_netdevice() takes one of the
notifier based failure paths, from Subash Abhinov Kasiviswanathan.
13) Fix leak in sctp_do_bind(), from Mao Wenan.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (72 commits)
cdc_ether: fix rndis support for Mediatek based smartphones
sctp: destroy bucket if failed to bind addr
sctp: remove redundant assignment when call sctp_get_port_local
sctp: change return type of sctp_get_port_local
ixgbevf: Fix secpath usage for IPsec Tx offload
sctp: Fix the link time qualifier of 'sctp_ctrlsock_exit()'
ixgbe: Fix secpath usage for IPsec TX offload.
net: qrtr: fix memort leak in qrtr_tun_write_iter
net: Fix null de-reference of device refcount
ipv6: Fix the link time qualifier of 'ping_v6_proc_exit_net()'
tun: fix use-after-free when register netdev failed
tcp: fix tcp_ecn_withdraw_cwr() to clear TCP_ECN_QUEUE_CWR
ixgbe: fix double clean of Tx descriptors with xdp
ixgbe: Prevent u8 wrapping of ITR value to something less than 10us
mlx4: fix spelling mistake "veify" -> "verify"
net: hns3: fix spelling mistake "undeflow" -> "underflow"
net: lmc: fix spelling mistake "runnin" -> "running"
NFC: st95hf: fix spelling mistake "receieve" -> "receive"
net/rds: An rds_sock is added too early to the hash table
mac80211: Do not send Layer 2 Update frame before authorization
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
- tmio: Fixup runtime PM management during probe and remove
- sdhci-pci-o2micro: Fix eMMC initialization for an AMD SoC
- bcm2835: Prevent lockups when terminating work
* tag 'mmc-v5.3-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: tmio: Fixup runtime PM management during remove
mmc: tmio: Fixup runtime PM management during probe
Revert "mmc: tmio: move runtime PM enablement to the driver implementations"
Revert "mmc: sdhci: Remove unneeded quirk2 flag of O2 SD host controller"
Revert "mmc: bcm2835: Terminate timeout work synchronously"
|
|
Pull drm fixes from Dave Airlie:
"From the maintainer summit, just some last minute fixes for final:
lima:
- fix gem_wait ioctl
core:
- constify modes list
i915:
- DP MST high color depth regression
- GPU hangs on vulkan compute workloads"
* tag 'drm-fixes-2019-09-13' of git://anongit.freedesktop.org/drm/drm:
drm/lima: fix lima_gem_wait() return value
drm/i915: Restore relaxed padding (OCL_OOB_SUPPRES_ENABLE) for skl+
drm/i915: Limit MST to <= 8bpc once again
drm/modes: Make the whitelist more const
|
|
Since commit 795fe54c2a828099e ("bfq: Add per-device weight"), bfq uses
blkg_conf_prep() and blkg_conf_finish(), which are not exported. So, it
causes linkage error if bfq compiled as a module.
Fixes: 795fe54c2a828099e ("bfq: Add per-device weight")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next
Kalle Valo says:
====================
wireless-drivers-next patches for 5.4
Last set of patches for 5.4. wil6210 and rtw88 being most active this
time, but ath9k also having a new module to load devices without
EEPROM.
Major changes:
wil6210
* add support for Enhanced Directional Multi-Gigabit (EDMG) channels 9-11
* add debugfs file to show PCM ring content
* report boottime_ns in scan results
ath9k
* add a separate loader for AR92XX (and older) pci(e) without eeprom
brcmfmac
* use the same wiphy after PCIe reset to not confuse the user space
rtw88
* enable interrupt migration
* enable AMSDU in AMPDU aggregation
* report RX power for each antenna
* enable to DPK and IQK calibration methods to improve performance
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Standard integer promotion is already done and %hx and %hhx is useless
so do not encourage the use of %hh[xudi] or %h[xudi].
As Linus said in:
https://lore.kernel.org/lkml/CAHk-=wgoxnmsj8GEVFJSvTwdnWm8wVJthefNk2n6+4TC=20e0Q@mail.gmail.com/
It's a pointless warning, making for more complex code, and
making people remember esoteric printf format details that have no
reason for existing.
The "h" and "hh" things should never be used. The only reason for them
being used if if you have an "int", but you want to print it out as a
"char" (and honestly, that is a really bad reason, you'd be better off
just using a proper cast to make the code more obvious).
So if what you have a "char" (or unsigned char) you should always just
print it out as an "int", knowing that the compiler already did the
proper type conversion.
Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Louis Taylor <louis@kragniz.eu>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
This argument is supported on RISC-V systems and widely used, but was
not documented here.
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Remove the clever example about read-write lock because this type of
lock is not recommended anymore (according to the very same document).
So there is no reason to teach clever things that people should not do.
Signed-off-by: Federico Vaga <federico.vaga@vaga.pv.it>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Describe how the comedi minor device numbers are split across comedi
devices and comedi subdevices.
Replace the current, long dead URL with an official URL for the Comedi
project.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into kvm-master
KVM: s390: Fixes for 5.3
- prevent a user triggerable oops in the migration code
- do not leak kernel stack content
|
|
James Harvey reported a livelock that was introduced by commit
d012a06ab1d23 ("Revert "KVM: x86/mmu: Zap only the relevant pages when
removing a memslot"").
The livelock occurs because kvm_mmu_zap_all() as it exists today will
voluntarily reschedule and drop KVM's mmu_lock, which allows other vCPUs
to add shadow pages. With enough vCPUs, kvm_mmu_zap_all() can get stuck
in an infinite loop as it can never zap all pages before observing lock
contention or the need to reschedule. The equivalent of kvm_mmu_zap_all()
that was in use at the time of the reverted commit (4e103134b8623, "KVM:
x86/mmu: Zap only the relevant pages when removing a memslot") employed
a fast invalidate mechanism and was not susceptible to the above livelock.
There are three ways to fix the livelock:
- Reverting the revert (commit d012a06ab1d23) is not a viable option as
the revert is needed to fix a regression that occurs when the guest has
one or more assigned devices. It's unlikely we'll root cause the device
assignment regression soon enough to fix the regression timely.
- Remove the conditional reschedule from kvm_mmu_zap_all(). However, although
removing the reschedule would be a smaller code change, it's less safe
in the sense that the resulting kvm_mmu_zap_all() hasn't been used in
the wild for flushing memslots since the fast invalidate mechanism was
introduced by commit 6ca18b6950f8d ("KVM: x86: use the fast way to
invalidate all pages"), back in 2013.
- Reintroduce the fast invalidate mechanism and use it when zapping shadow
pages in response to a memslot being deleted/moved, which is what this
patch does.
For all intents and purposes, this is a revert of commit ea145aacf4ae8
("Revert "KVM: MMU: fast invalidate all pages"") and a partial revert of
commit 7390de1e99a70 ("Revert "KVM: x86: use the fast way to invalidate
all pages""), i.e. restores the behavior of commit 5304b8d37c2a5 ("KVM:
MMU: fast invalidate all pages") and commit 6ca18b6950f8d ("KVM: x86:
use the fast way to invalidate all pages") respectively.
Fixes: d012a06ab1d23 ("Revert "KVM: x86/mmu: Zap only the relevant pages when removing a memslot"")
Reported-by: James Harvey <jamespharvey20@gmail.com>
Cc: Alex Willamson <alex.williamson@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Emulation of VMPTRST can incorrectly inject a page fault
when passed an operand that points to an MMIO address.
The page fault will use uninitialized kernel stack memory
as the CR2 and error code.
The right behavior would be to abort the VM with a KVM_EXIT_INTERNAL_ERROR
exit to userspace; however, it is not an easy fix, so for now just ensure
that the error code and CR2 are zero.
Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com>
Cc: stable@vger.kernel.org
[add comment]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The implementation of vmread to memory is still incomplete, as it
lacks the ability to do vmread to I/O memory just like vmptrst.
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
I used the C comment style (/* ... */) for the flex and bison files
as in Kconfig (scripts/kconfig/{lexer.l,parser.y})
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
|
|
Use the __section() shorthand. This avoids escaping double-quotes,
and improves the readability.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
|
|
This makes *.mod.c much more readable. I confirmed depmod still
produced the same modules.dep file.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
|
|
Arnd Bergmann reported false-positive modpost warnings detected by his
randconfig testing of linux-next.
Actually, this happens under the combination of CONFIG_MODVERSIONS
and CONFIG_TRIM_UNUSED_KSYMS since commit 15bfc2348d54 ("modpost:
check for static EXPORT_SYMBOL* functions").
For example, arch/arm/config/multi_v7_defconfig + CONFIG_MODVERSIONS
+ CONFIG_TRIM_UNUSED_KSYMS produces the following false-positives:
WARNING: "__lshrdi3" [vmlinux] is a static (unknown)
WARNING: "__ashrdi3" [vmlinux] is a static (unknown)
WARNING: "__aeabi_lasr" [vmlinux] is a static (unknown)
WARNING: "__aeabi_llsr" [vmlinux] is a static (unknown)
WARNING: "ftrace_set_clr_event" [vmlinux] is a static (unknown)
WARNING: "__muldi3" [vmlinux] is a static (unknown)
WARNING: "__aeabi_ulcmp" [vmlinux] is a static (unknown)
WARNING: "__ucmpdi2" [vmlinux] is a static (unknown)
WARNING: "__aeabi_lmul" [vmlinux] is a static (unknown)
WARNING: "__bswapsi2" [vmlinux] is a static (unknown)
WARNING: "__bswapdi2" [vmlinux] is a static (unknown)
WARNING: "__ashldi3" [vmlinux] is a static (unknown)
WARNING: "__aeabi_llsl" [vmlinux] is a static (unknown)
The root cause of the problem is not in the modpost, but in the
implementation of CONFIG_TRIM_UNUSED_KSYMS.
If there is at least one untrimmed symbol in the file, genksyms is
invoked to calculate CRC of *all* the exported symbols in that file
even if some of them have been trimmed due to no caller existing.
As a result, .tmp_*.ver files contain CRC of trimmed symbols, thus
unneeded, orphan __crc* symbols are added to objects. It had been
harmless until recently.
With commit 15bfc2348d54 ("modpost: check for static EXPORT_SYMBOL*
functions"), it is now harmful because the bogus __crc* symbols make
modpost call sym_update_crc() to add the symbols to the hash table,
but there is no one that clears the ->is_static member.
I gave Fixes to the first commit that uncovered the issue, but the
potential problem has long existed since commit f235541699bc
("export.h: allow for per-symbol configurable EXPORT_SYMBOL()").
Fixes: 15bfc2348d54 ("modpost: check for static EXPORT_SYMBOL* functions")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Arnd Bergmann <arnd@arndb.de>
|
|
Part of the intention during the definition of the RISC-V kernel image
header was to lay the groundwork for a future merge with the ARM64
image header. One error during my original review was not noticing
that the RISC-V header's "magic" field was at a different size and
position than the ARM64's "magic" field. If the existing ARM64 Image
header parsing code were to attempt to parse an existing RISC-V kernel
image header format, it would see a magic number 0. This is
undesirable, since it's our intention to align as closely as possible
with the ARM64 header format. Another problem was that the original
"res3" field was not being initialized correctly to zero.
Address these issues by creating a 32-bit "magic2" field in the RISC-V
header which matches the ARM64 "magic" field. RISC-V binaries will
store "RSC\x05" in this field. The intention is that the use of the
existing 64-bit "magic" field in the RISC-V header will be deprecated
over time. Increment the minor version number of the file format to
indicate this change, and update the documentation accordingly. Fix
the assembler directives in head.S to ensure that reserved fields are
properly zero-initialized.
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Reported-by: Palmer Dabbelt <palmer@sifive.com>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
Cc: Atish Patra <atish.patra@wdc.com>
Cc: Karsten Merker <merker@debian.org>
Link: https://lore.kernel.org/linux-riscv/194c2f10c9806720623430dbf0cc59a965e50448.camel@wdc.com/T/#u
Link: https://lore.kernel.org/linux-riscv/mhng-755b14c4-8f35-4079-a7ff-e421fd1b02bc@palmer-si-x1e/T/#t
|
|
IPI shorthand is supported now by linux apic/x2apic driver, switch to
IPI shorthand for all excluding self and all including self destination
shorthand in kvm guest, to avoid splitting the target mask into several
PV IPI hypercalls. This patch removes the kvm_send_ipi_all() and
kvm_send_ipi_allbutself() since the callers in APIC codes have already
taken care of apic_use_ipi_shorthand and fallback to ->send_IPI_mask
and ->send_IPI_mask_allbutself if it is false.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Sean Christopherson <sean.j.christopherson@intel.com>
Cc: Nadav Amit <namit@vmware.com>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
There is a spelling mistake on the documentation. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Referencing device tree nodes from a property allows to pass arguments.
This is for example used for referencing gpios. This looks as follows:
gpio_ctrl: gpio-controller {
#gpio-cells = <2>
...
}
someothernode {
gpios = <&gpio_ctrl 5 0 &gpio_ctrl 3 0>;
...
}
To know the number of arguments this must be either fixed, or the
referenced node is checked for a $cells_name (here: "#gpio-cells")
property and with this information the start of the second reference can
be determined.
Currently regulators are referenced with no additional arguments. To
allow some optional arguments without having to change all referenced
nodes this change introduces a way to specify a default cell_count. So
when a phandle is parsed we check for the $cells_name property and use
it as before if present. If it is not present we fall back to
cells_count if non-negative and only fail if cells_count is smaller than
zero.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Currently of_for_each_phandle ignores the cell_count parameter when a
cells_name is given. I intend to change that and let the iterator fall
back to a non-negative cell_count if the cells_name property is missing
in the referenced node.
To not change how existing of_for_each_phandle's users iterate, fix them
to pass cell_count = -1 when also cells_name is given which yields the
expected behaviour with and without my change.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/song/md into for-5.4/block
Pull MD fixes from Song.
* 'md-next' of git://git.kernel.org/pub/scm/linux/kernel/git/song/md:
raid5: use bio_end_sector in r5_next_bio
raid5: remove STRIPE_OPS_REQ_PENDING
md: add feature flag MD_FEATURE_RAID0_LAYOUT
md/raid0: avoid RAID0 data corruption due to layout confusion.
raid5: don't set STRIPE_HANDLE to stripe which is in batch list
raid5: don't increment read_errors on EILSEQ return
|
|
This commit introduces a global cache replacement (instead of per-client
cleanup).
If one bufio client uses the cache heavily and another client is not using
it, we want to let the first client use most of the cache. The old
algorithm would partition the cache equally betwen the clients and that is
sub-optimal.
For cache replacement, we use the clock algorithm because it doesn't
require taking any lock when the buffer is accessed.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Actually, we calculate bio's end sector here, so use the common
way for the purpose.
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
|
|
This stripe state is not used anymore after commit 51acbcec6c42b24
("md: remove CONFIG_MULTICORE_RAID456"), so remove the obsoleted
state.
gjiang@nb01257:~/md$ grep STRIPE_OPS_REQ_PENDING drivers/md/ -r
drivers/md/raid5.c: (1 << STRIPE_OPS_REQ_PENDING) |
drivers/md/raid5.h: STRIPE_OPS_REQ_PENDING,
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
|
|
'devlink-move-reload-fail-indication-to-devlink-core-and-expose-to-user'
Jiri Pirko says:
====================
net: devlink: move reload fail indication to devlink core and expose to user
First two patches are dependencies of the last one. That moves devlink
reload failure indication to the devlink code, so the drivers do not
have to track it themselves. Currently it is only mlxsw, but I will send
a follow-up patchset that introduces this in netdevsim too.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
