summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-06-17ARM: 7756/1: zImage/virt: remove hyp-stub.S during distcleanMagnus Damm
Make sure hyp-stub.S gets removed during make distclean, this left over file was introduced in commit: 424e599 ARM: zImage/virt: hyp mode entry support for the zImage loader Signed-off-by: Magnus Damm <damm@opensource.se> Acked-by: Dave Martin <dave.martin@linaro.org> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-06-17ARM: 7755/1: handle user space mapped pages in flush_kernel_dcache_pageSimon Baatz
Commit f8b63c1 made flush_kernel_dcache_page a no-op assuming that the pages it needs to handle are kernel mapped only. However, for example when doing direct I/O, pages with user space mappings may occur. Thus, continue to do lazy flushing if there are no user space mappings. Otherwise, flush the kernel cache lines directly. Signed-off-by: Simon Baatz <gmbnomis@gmail.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Cc: <stable@vger.kernel.org> # 3.2+ Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-06-17ARM: 7754/1: Fix the CPU ID and the mask associated to the PJ4BGregory CLEMENT
This commit fixes the ID and mask for the PJ4B which was too restrictive and didn't match the CPU of the Armada 370 SoC. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Reviewed-by: Will Deacon <will.deacon@arm.com> Cc: <stable@vger.kernel.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-06-17ARM: 7753/1: map_init_section flushes incorrect pmdPo-Yu Chuang
This bug was introduced in commit e651eab0. Some v4/v5 platforms failed to boot due to this. Signed-off-by: Po-Yu Chuang <ratbert.chuang@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-06-17ARM: 7752/1: errata: LoUIS bit field in CLIDR register is incorrectJon Medhurst
On Cortex-A9 before version r1p0, the LoUIS bit field of the CLIDR register returns zero when it should return one. This leads to cache maintenance operations which rely on this value to not function as intended, causing data corruption. The workaround for this errata is to detect affected CPUs and correct the LoUIS value read. Acked-by: Will Deacon <will.deacon@arm.com> Acked-by: Nicolas Pitre <nico@linaro.org> Cc: stable@vger.kernel.org Signed-off-by: Jon Medhurst <tixy@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-06-17ALSA: hda - Add models for Dell headset jacksDavid Henningsson
These headset jacks keep coming in on more and more platforms, and it's possible I don't catch them all. Make it easier to test and verify by making models. Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-06-17ARM: shmobile: r8a7790: don't use external clock for SCIFsUlrich Hecht
This is an external component and may or may not be there, while the internal clock always works. Signed-off-by: Ulrich Hecht <ulrich.hecht@gmail.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-17ARM: shmobile: r8a7790: HSCIF supportUlrich Hecht
Adds support for HSCIF0 and HSCIF1 on the r8a7790. Signed-off-by: Ulrich Hecht <ulrich.hecht@gmail.com> [ horms+renesas@verge.net.au this is the setup-r8a7790.c which I somehow miss-applied as part of another patch. The clock-r8a7790.c portion of this patch has already been merged. ] Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-17serial: sh-sci: HSCIF supportUlrich Hecht
Adds support for "High Speed Serial Communications Interface with FIFO", essentially a SCIF with 128-byte FIFOs and more accurate baud rate generator. Signed-off-by: Ulrich Hecht <ulrich.hecht@gmail.com> Acked-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-17arm: dt: zynq: Add support for the zed platformSoren Brinkmann
Add a DT fragment for the Zed Zynq platform and a corresponding target to the Makefile Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Reviewed-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2013-06-17arm: dt: zynq: Add support for the zc706 platformSoren Brinkmann
Add a DT fragment for the zc706 Zynq platform and a corresponding target to the Makefile. Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Reviewed-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2013-06-17arm: dt: zynq: Use 'status' property for UART nodesSoren Brinkmann
Set the default status for UARTs to disabled in the zynq-7000.dtsi file and let board dts files enable the UARTs on demand. Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Reviewed-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2013-06-17arm: zynq: Remove board specific compatibility stringSoren Brinkmann
It is not necessary to have board specific compatibility strings in the platform code. The board dts files can use the more generic 'xlnx,zynq-7000' string. Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Reviewed-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2013-06-17ALSA: usb-audio: Fix invalid volume resolution for Logitech HD Webcam c310Takashi Iwai
Just like the previous fix for LogitechHD Webcam c270 in commit 11e7064f35bb87da8f427d1aa4bbd8b7473a3993, c310 model also requires the same workaround for avoiding the kernel warning. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=59741 Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-06-17ALSA: hda - Fix pin configurations for MacBook Air 4,2Takashi Iwai
MacBook Air 4,2 requires the whole default pin configuration table to be overridden by the driver, as usual, as Apple's machines don't set up properly after boot. Otherwise mic won't work, and other ill effect may happen. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=59381 Reported-and-tested-by: Peter John Hartman <peterjohnhartman@gmail.com> Cc: <stable@vger.kernel.org> [v3.9+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-06-17ARM: dts: imx27: Add VPU devicetree nodeAlexander Shiyan
This patch adds the missing VPU devicetree node for i.MX27 CPUs. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: mxc: fix gpio-ranges for VF610Stephen Warren
The gpio-ranges properties in vf610.dtsi were written according to an older version of the GPIO bindings. Unfortunately, these were changed incompatibly in commit 86853c8 "gpio: add gpio offset in gpio range cells property". This patch adds the missing required extra cell in each gpio-ranges property. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: dtsi: imx6qdl-sabresd: Enable WM8962 audio supportNicolin Chen
Enable WM8962 ALSA machine driver via devicetree. Signed-off-by: Nicolin Chen <b42378@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: dtsi: imx6qdl-sabresd: Enable SSI2 and AUDMUXNicolin Chen
Enable SSI2 and its pin configuration in AUDMUX. Signed-off-by: Nicolin Chen <b42378@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: dtsi: imx6qdl-sabresd: Add WM8962 CODEC supportNicolin Chen
Add WM8962 CODEC support and enable its parent I2C bus. Signed-off-by: Nicolin Chen <b42378@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: dtsi: imx6qdl-sabresd: add a fixed regulator for WM8962Nicolin Chen
On Sabre SD, system controls WM8962 power by pulling up/down GPIO_4_10, so add a regulator controled by GPIO_4_10 for WM8962. Signed-off-by: Nicolin Chen <b42378@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: dtsi: imx6dl: Add a pinctrl for AUDMUXNicolin Chen
Add a pinctrl for AUDMUX used on imx6dl-sabresd. Signed-off-by: Nicolin Chen <b42378@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: dtsi: imx6q/imx6dl: Add a pinctrl for I2C1Nicolin Chen
Add a pinctrl for I2C1 used on imx6q/dl-sabresd. Signed-off-by: Nicolin Chen <b42378@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: dts: imx6qdl-sabresd: add clko1 iomux configurationNicolin Chen
Setting GPIO_0 pad as clko1 clock output to provide MCLK for WM8962. Signed-off-by: Nicolin Chen <b42378@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: dts: Phytec imx6q pfla02 and pbab01 supportChristian Hemp
Add support for imx6q Phytec phyFLEX-i.MX6 Quad (aka pfla02 and pbab01). - Module pfla02 - Carrier-Board pbab01 Signed-off-by: Christian Hemp <c.hemp@phytec.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: dts: imx6q: Add pinctrl for usdhc2 and enetChristian Hemp
Add a group to the usdhc2 and enet pinctrl. Signed-off-by: Christian Hemp <c.hemp@phytec.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: dts: imx27-phytec-phycore-rdk: Add MTD name for NOR flashAlexander Shiyan
This patch adds name for NOR flash. This keeps compatibility for commandline partitions parsing from old bootloaders and make name of device same for DT and non-DT boot. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Acked-by: Sascha Hauer <s.hauer@pengutonix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: dts: imx27-phytec-phycore-rdk: Add SDHC supportAlexander Shiyan
This patch adds the SHDC devicetree node for PCM970 board. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Acked-by: Sascha Hauer <s.hauer@pengutonix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: dts: i.MX27: Add SDHC devicetree nodesAlexander Shiyan
This patch adds the missing SDHC devicetree nodes for i.MX27 SoCs. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Acked-by: Sascha Hauer <s.hauer@pengutonix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: dts: i.MX27: Add DMA devicetree nodeAlexander Shiyan
This patch adds the missing DMA devicetree node for i.MX27 SoCs. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Acked-by: Sascha Hauer <s.hauer@pengutonix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: dts: imx6qdl-sabreauto: enable the WEIM NORHuang Shijie
Enable the WEIM NOR for imx6q{dl}-sabreauto boards. For the pin conflict with SPI NOR, its status is set to "disabled". Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: dts: imx6dl: add pinctrls for WEIM NORHuang Shijie
Add two pinctrls for WEIM: one for the weim nor, another for the chipselect. Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: dts: imx6q: add pinctrls for WEIM NORHuang Shijie
Add two pinctrls for WEIM: one for the weim nor, another for the chipselect. Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: dts: imx6qdl: add more information for WEIMHuang Shijie
Add the clock and compatible information for the weim. Also adds the weim label. Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: dts: imx6q{dl}: fix the pin conflict between SPI and WEIMHuang Shijie
In the imx6q-sabreauto and imx6dl-sabreauto boards, the pin MX6Q{DL}_PAD_EIM_D19 is used as a GPIO for SPI NOR, but it is used as a data pin for the WEIM NOR. In order to fix the conflict, this patch removes the pin from the hog, and adds a new board-level pinctrl: pinctrl_ecspi1_sabreauto. The SPI NOR selects this pinctrl_ecspi1_sabreauto when it is enabled. Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17drivers: bus: add a new driver for WEIMHuang Shijie
The WEIM(Wireless External Interface Module) works like a bus. You can attach many different devices on it, such as NOR, onenand. In the case of i.MX6q-sabreauto, the NOR is connected to WEIM. This patch also adds the devicetree binding document. The driver only works when the devicetree is enabled. Signed-off-by: Huang Shijie <b32955@freescale.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM i.MX53: mba53: add DI1_CLK to pinctrl for disp1Markus Niebel
Add missing pin config Signed-off-by: Markus Niebel <Markus.Niebel@tqs.de> Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM i.MX53: mba53: fix lvds/disp pinctrlSteffen Trumtrar
use NO_PAD_CTL / 0x80000000 instead of 0x10000 to prevent misconfigured pads Signed-off-by: Markus Niebel <Markus.Niebel@tqs.de> [Steffen: split up patch into tqma53+mba53 part] Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM i.MX53: mba53: use reset gpio for FECMarkus Niebel
Signed-off-by: Markus Niebel <Markus.Niebel@tqs.de> Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM i.MX53: mba53: add missing gpio stuff for pca9554Markus Niebel
Add properties to make use of pca9554 gpio expander. Signed-off-by: Markus Niebel <Markus.Niebel@tqs.de> Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM i.MX53: mba53: add sound supportMarkus Niebel
Enable the sgtl5000 found on MBa53 mainboard. Also enable audio muxer and ssi, which are needed for sound to work. Signed-off-by: Markus Niebel <Markus.Niebel@tqs.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM i.MX53: mba53: add Tevision EncoderPhilipp Zabel
Enable tve on MBa53. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM i.MX53: mba53: Add display supportSascha Hauer
As the displays are optional and we have more than one, also set the status of the parallel display and the ldb to disabled. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM i.MX53: mba53: enable usbotg & usbh1Michael Olbrich
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de> Signed-off-by: Markus Niebel <Markus.Niebel@tqs.de> Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM i.MX53: tqma53: add WP/CD pinctrl and vmmc to esdhc2Steffen Trumtrar
Add WP/CD pinctrl for esdhc2. Also, add vmmc-supply for esdhc2. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM i.MX53: Add TVE entry to i.MX53 dtsiPhilipp Zabel
This adds the Television Encoder (TVEv2) device tree node to the i.MX53 dtsi. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM i.MX53: tqma53: rev 300 specific pin configurationPhilipp Zabel
I2S_MCLK is moved from pad GPIO19 to GPIO0, which can be muxed to the ssi_ext1 clock signal. #SYSTEM_DOWN is moved from pad GPIO0 to GPIO19. Add #PHY_RESET and LCD_CONTRAST. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM i.MX53: tqma53: fix pinctrl settingsPhilipp Zabel
BIT(31) is NO_PAD_CTL, not BIT(16) Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM i.MX53: tqma53: Fix interrupt polarity for the mc34708Sascha Hauer
It's active high, not active low. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: dts: imx27-phytec-phycore-som: Add initial support for PCM970 RDKAlexander Shiyan
Patch adds initial dts for Phytec PCM970 Rapid development kit. - Added definition for UART0 and UART1. - Added additional SPI chipselect which used on RDK for ZegBee module. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
generated by cgit (git 2.34.1) at 2025-10-01 21:15:11 +0000