| Age | Commit message (Collapse) | Author |
|---|
|
Add a refcount to avoid the deadlock in on-demand read mode. The
on-demand read mode will pin the corresponding cachefiles object for
each anonymous fd. The cachefiles object is unpinned when the anonymous
fd gets closed. When the user daemon exits and the fd of
"/dev/cachefiles" device node gets closed, it will wait for all
cahcefiles objects getting withdrawn. Then if there's any anonymous fd
getting closed after the fd of the device node, the user daemon will
hang forever, waiting for all objects getting withdrawn.
To fix this, add a refcount indicating if there's any object pinned by
anonymous fds. The cachefiles cache gets unbound and withdrawn when the
refcount is decreased to 0. It won't change the behaviour of the
original mode, in which case the cachefiles cache gets unbound and
withdrawn as long as the fd of the device node gets closed.
Signed-off-by: Jeffle Xu <jefflexu@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220509074028.74954-4-jefflexu@linux.alibaba.com
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
Fscache/CacheFiles used to serve as a local cache for a remote
networking fs. A new on-demand read mode will be introduced for
CacheFiles, which can boost the scenario where on-demand read semantics
are needed, e.g. container image distribution.
The essential difference between these two modes is seen when a cache
miss occurs: In the original mode, the netfs will fetch the data from
the remote server and then write it to the cache file; in on-demand
read mode, fetching the data and writing it into the cache is delegated
to a user daemon.
As the first step, notify the user daemon when looking up cookie. In
this case, an anonymous fd is sent to the user daemon, through which the
user daemon can write the fetched data to the cache file. Since the user
daemon may move the anonymous fd around, e.g. through dup(), an object
ID uniquely identifying the cache file is also attached.
Also add one advisory flag (FSCACHE_ADV_WANT_CACHE_SIZE) suggesting that
the cache file size shall be retrieved at runtime. This helps the
scenario where one cache file contains multiple netfs files, e.g. for
the purpose of deduplication. In this case, netfs itself has no idea the
size of the cache file, whilst the user daemon should give the hint on
it.
Signed-off-by: Jeffle Xu <jefflexu@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220509074028.74954-3-jefflexu@linux.alibaba.com
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
Extract the generic routine of writing data to cache files, and make it
generally available.
This will be used by the following patch implementing on-demand read
mode. Since it's called inside CacheFiles module, make the interface
generic and unrelated to netfs_cache_resources.
It is worth noting that, ki->inval_counter is not initialized after
this cleanup. It shall not make any visible difference, since
inval_counter is no longer used in the write completion routine, i.e.
cachefiles_write_complete().
Signed-off-by: Jeffle Xu <jefflexu@linux.alibaba.com>
Acked-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20220425122143.56815-2-jefflexu@linux.alibaba.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
Since errors from nfs_pageio_complete() are already being reported
through nfs_async_write_error(), we should not be returning them to the
callers of do_writepages() as well. They will end up being reported
through the generic mechanism instead.
Fixes: 6fbda89b257f ("NFS: Replace custom error reporting mechanism with generic one")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
If we do flush cached writebacks in nfs_write_end() due to the imminent
expiration of an RPCSEC_GSS session, then we should defer reporting any
resulting errors until the calls to file_check_and_advance_wb_err() in
nfs_file_write() and nfs_file_fsync().
Fixes: 6fbda89b257f ("NFS: Replace custom error reporting mechanism with generic one")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Any errors reported by the write() system call need to be cleared from
the file descriptor's error tracking. The current call to nfs_wb_all()
causes the error to be reported, but since it doesn't call
file_check_and_advance_wb_err(), we can end up reporting the same error
a second time when the application calls fsync().
Note that since Linux 4.13, the rule is that EIO may be reported for
write(), but it must be reported by a subsequent fsync(), so let's just
drop reporting it in write.
The check for nfs_ctx_key_to_expire() is just a duplicate to the one
already in nfs_write_end(), so let's drop that too.
Reported-by: ChenXiaoSong <chenxiaosong2@huawei.com>
Fixes: ce368536dd61 ("nfs: nfs_file_write() should check for writeback errors")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
If the commit to disk is interrupted, we should still first check for
filesystem errors so that we can report them in preference to the error
due to the signal.
Fixes: 2197e9b06c22 ("NFS: Fix up fsync() when the server rebooted")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
If the attempt to flush data was interrupted due to a local signal, then
just requeue the writes back for I/O.
Fixes: 6fbda89b257f ("NFS: Replace custom error reporting mechanism with generic one")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
The existing logic happens to work fine on UML, but is not correct when
running on other arches.
1. We didn't initialize `int err`, and kunit_filter_suites() doesn't
explicitly set it to 0 on success. So we had false "failures".
Note: it doesn't happen on UML, causing this to get overlooked.
2. If we error out, we do not call kunit_handle_shutdown().
This makes kunit.py timeout when using a non-UML arch, since the QEMU
process doesn't ever exit.
Fixes: a02353f49162 ("kunit: bail out of test filtering logic quicker if OOM")
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
|
|
This patch enables idmapped mounts for erofs, since all dedicated helpers
for this functionality existsm, so, in this patch we just pass down the
user_namespace argument from the VFS methods to the relevant helpers.
Simple idmap example on erofs image:
1. mkdir dir
2. touch dir/file
3. mkfs.erofs erofs.img dir
4. mount -t erofs -o loop erofs.img /mnt/erofs/
5. ls -ln /mnt/erofs/
total 0
-rw-rw-r-- 1 1000 1000 0 May 17 15:26 file
6. mount-idmapped --map-mount b:1000:1001:1 /mnt/erofs/ /mnt/scratch_erofs/
7. ls -ln /mnt/scratch_erofs/
total 0
-rw-rw-r-- 1 1001 1001 0 May 17 15:26 file
Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Signed-off-by: Chao Yu <chao.yu@oppo.com>
Link: https://lore.kernel.org/r/20220517104103.3570721-1-chao@kernel.org
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
Implement export operations in order to make EROFS support accessing
inodes with filehandles so that it can be exported via NFS and used
by overlayfs.
Without this patch, 'exportfs -rv' will report:
exportfs: /root/erofs_mp does not support NFS export
Also tested with unionmount-testsuite and the testcase below passes now:
./run --ov --erofs --verify hard-link
For more details about the testcase, see:
https://github.com/amir73il/unionmount-testsuite/pull/6
Signed-off-by: Hongnan Li <hongnan.li@linux.alibaba.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20220425040712.91685-1-hongnan.li@linux.alibaba.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
Commit
a4972b1b9a04 ("edac: i5100_edac: Remove unused i5100_recmema_dm_buf_id")
left this function unused. Remove it.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220514080433.29944-1-yuehaibing@huawei.com
|
|
I got some KASAN report as below:
[ 46.959738] ==================================================================
[ 46.960430] BUG: KASAN: use-after-free in z_erofs_shifted_transform+0x2bd/0x370
[ 46.960430] Read of size 4074 at addr ffff8880300c2f8e by task fssum/188
...
[ 46.960430] Call Trace:
[ 46.960430] <TASK>
[ 46.960430] dump_stack_lvl+0x41/0x5e
[ 46.960430] print_report.cold+0xb2/0x6b7
[ 46.960430] ? z_erofs_shifted_transform+0x2bd/0x370
[ 46.960430] kasan_report+0x8a/0x140
[ 46.960430] ? z_erofs_shifted_transform+0x2bd/0x370
[ 46.960430] kasan_check_range+0x14d/0x1d0
[ 46.960430] memcpy+0x20/0x60
[ 46.960430] z_erofs_shifted_transform+0x2bd/0x370
[ 46.960430] z_erofs_decompress_pcluster+0xaae/0x1080
The root cause is that the tail pcluster won't be a complete filesystem
block anymore. So if ztailpacking is used, the second part of an
uncompressed tail pcluster may not be ``rq->pageofs_out``.
Fixes: ab749badf9f4 ("erofs: support unaligned data decompression")
Fixes: cecf864d3d76 ("erofs: support inline data decompression")
Reviewed-by: Yue Hu <huyue2@coolpad.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20220512115833.24175-1-hsiangkao@linux.alibaba.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
Fix some outdated comments and typos, hopefully helpful.
Link: https://lore.kernel.org/r/20220506194612.117120-3-hsiangkao@linux.alibaba.com
Reviewed-by: Yue Hu <huyue2@coolpad.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
Some comments haven't been useful anymore since the code updated.
Let's drop them instead.
Link: https://lore.kernel.org/r/20220506194612.117120-2-hsiangkao@linux.alibaba.com
Reviewed-by: Yue Hu <huyue2@coolpad.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
The big pcluster feature has been merged for a year, it has been mostly
stable now.
Signed-off-by: Yue Hu <huyue2@coolpad.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20220407050505.12683-1-huyue2@coolpad.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
The design of INT indicator register (R_AX_PCIE_HIMR00_V1) is to reduce IO
during frequent interrupts, because it can stop chip sending interrupt to
host if we just set this indicator to 0, not all IMR(s). This indicator
register looks like a root interrupt controller of wifi chip.
However, we can't set all other IMR(s) to 0 during we are running on
interrupt service routine, or the indicator register can't reflect the
status of certain interrupt happened during this period, and then miss
some interrupts especially SER interrupt events.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220516005215.5878-7-pkshih@realtek.com
|
|
Before 6 GHz band was supported, i.e. only 2 GHz and 5 GHz, they were the
same from the numerical point of view. However, after 6 GHz band support,
we need to do this conversion logically.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220516005215.5878-6-pkshih@realtek.com
|
|
Update notes:
update the following to HALRF_027_00_052
TX power by rate table
TX power limit table
TX power limit RU table
TX shape table doesn't seem to be changed on HALRF_027_00_052
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220516005215.5878-5-pkshih@realtek.com
|
|
Somehow, hardware reports incorrect mac_id and pollute memory. Check index
before we access the array.
UBSAN: array-index-out-of-bounds in rtw89/phy.c:2517:23
index 188 is out of range for type 's32 [64]'
CPU: 1 PID: 51550 Comm: irq/35-rtw89_pc Tainted: G OE
Call Trace:
<IRQ>
show_stack+0x52/0x58
dump_stack_lvl+0x4c/0x63
dump_stack+0x10/0x12
ubsan_epilogue+0x9/0x45
__ubsan_handle_out_of_bounds.cold+0x44/0x49
? __alloc_skb+0x92/0x1d0
rtw89_phy_cfo_parse+0x44/0x7f [rtw89_core]
rtw89_core_rx+0x261/0x871 [rtw89_core]
? __alloc_skb+0xee/0x1d0
rtw89_pci_napi_poll+0x3fa/0x4ea [rtw89_pci]
__napi_poll+0x33/0x1a0
net_rx_action+0x126/0x260
? __queue_work+0x217/0x4c0
__do_softirq+0xd9/0x315
? disable_irq_nosync+0x10/0x10
do_softirq.part.0+0x6d/0x90
</IRQ>
<TASK>
__local_bh_enable_ip+0x62/0x70
rtw89_pci_interrupt_threadfn+0x182/0x1a6 [rtw89_pci]
irq_thread_fn+0x28/0x60
irq_thread+0xc8/0x190
? irq_thread_fn+0x60/0x60
kthread+0x16b/0x190
? irq_thread_check_affinity+0xe0/0xe0
? set_kthread_struct+0x50/0x50
ret_from_fork+0x22/0x30
</TASK>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220516005215.5878-4-pkshih@realtek.com
|
|
To make user space can set TX antenna via iw command. Then, we can diagnose
antenna is connected properly or not, and measure TX power in single path.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220516005215.5878-3-pkshih@realtek.com
|
|
When peer's NSS, rate or bandwidth is changed, we update RA(rate adaptive)
mask to ensure transmitting packets properly.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220516005215.5878-2-pkshih@realtek.com
|
|
Fix quantenna to be in the right order
Signed-off-by: Srinivasan R <srinir@outlook.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/MA1PR01MB26992E104B006B340C3C3A84C1CA9@MA1PR01MB2699.INDPRD01.PROD.OUTLOOK.COM
|
|
SAMA7G5-EK has 4 PDM microphones connected to PDMC0. PDMC0 pinmux is in
conflict with gmac1, gmac1 being enabled by default.
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/all/20220307122202.2251639-6-codrin.ciubotariu@microchip.com
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
|
|
Microchip's SAMA7G5 embeds two PDMCs. The PDMCs can be used to connect 2x4
PDM microphones.
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/all/20220307122202.2251639-5-codrin.ciubotariu@microchip.com
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
|
|
As the DT specification recommends, the node names should be of a
generic nature. Thus, the most appropriate generic node name for
the at91 rtt IPs is the "rtc" node name.
Signed-off-by: Sergiu Moga <sergiu.moga@microchip.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/all/20220304161159.147784-3-sergiu.moga@microchip.com
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
|
|
Add the required 'atmel,rtt-rtc-time-reg' property to the "rtt" nodes
of the board files that were missing it.
Signed-off-by: Sergiu Moga <sergiu.moga@microchip.com>
Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/all/20220304161159.147784-2-sergiu.moga@microchip.com
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
|
|
Add a basic stat test.
Add two tests of grouping behavior for topdown events. Topdown events
are special as they must be grouped with the slots event first.
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Florian Fischer <florian.fischer@muhq.space>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Shunsuke Nakamura <nakamura.shun@fujitsu.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20220517052724.283874-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
On Intel Icelake, topdown events must always be grouped with a slots
event as leader. When a metric is parsed a weak group is formed and
retried if perf_event_open fails. The retried events aren't grouped
breaking the slots leader requirement. This change modifies the weak
group "reset" behavior so that topdown events aren't broken from the
group for the retry.
$ perf stat -e '{slots,topdown-bad-spec,topdown-be-bound,topdown-fe-bound,topdown-retiring,branch-instructions,branch-misses,bus-cycles,cache-misses,cache-references,cpu-cycles,instructions,mem-loads,mem-stores,ref-cycles,baclears.any,ARITH.DIVIDER_ACTIVE}:W' -a sleep 1
Performance counter stats for 'system wide':
47,867,188,483 slots (92.27%)
<not supported> topdown-bad-spec
<not supported> topdown-be-bound
<not supported> topdown-fe-bound
<not supported> topdown-retiring
2,173,346,937 branch-instructions (92.27%)
10,540,253 branch-misses # 0.48% of all branches (92.29%)
96,291,140 bus-cycles (92.29%)
6,214,202 cache-misses # 20.120 % of all cache refs (92.29%)
30,886,082 cache-references (76.91%)
11,773,726,641 cpu-cycles (84.62%)
11,807,585,307 instructions # 1.00 insn per cycle (92.31%)
0 mem-loads (92.32%)
2,212,928,573 mem-stores (84.69%)
10,024,403,118 ref-cycles (92.35%)
16,232,978 baclears.any (92.35%)
23,832,633 ARITH.DIVIDER_ACTIVE (84.59%)
0.981070734 seconds time elapsed
After:
$ perf stat -e '{slots,topdown-bad-spec,topdown-be-bound,topdown-fe-bound,topdown-retiring,branch-instructions,branch-misses,bus-cycles,cache-misses,cache-references,cpu-cycles,instructions,mem-loads,mem-stores,ref-cycles,baclears.any,ARITH.DIVIDER_ACTIVE}:W' -a sleep 1
Performance counter stats for 'system wide':
31040189283 slots (92.27%)
8997514811 topdown-bad-spec # 28.2% bad speculation (92.27%)
10997536028 topdown-be-bound # 34.5% backend bound (92.27%)
4778060526 topdown-fe-bound # 15.0% frontend bound (92.27%)
7086628768 topdown-retiring # 22.2% retiring (92.27%)
1417611942 branch-instructions (92.26%)
5285529 branch-misses # 0.37% of all branches (92.28%)
62922469 bus-cycles (92.29%)
1440708 cache-misses # 8.292 % of all cache refs (92.30%)
17374098 cache-references (76.94%)
8040889520 cpu-cycles (84.63%)
7709992319 instructions # 0.96 insn per cycle (92.32%)
0 mem-loads (92.32%)
1515669558 mem-stores (84.68%)
6542411177 ref-cycles (92.35%)
4154149 baclears.any (92.35%)
20556152 ARITH.DIVIDER_ACTIVE (84.59%)
1.010799593 seconds time elapsed
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Florian Fischer <florian.fischer@muhq.space>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Shunsuke Nakamura <nakamura.shun@fujitsu.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20220517052724.283874-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
it is ASCII
It can be convenient to put a string value into a ptwrite payload as
a quick and easy way to identify what is being printed.
To make that useful, if the Intel ptwrite payload value contains only
printable ASCII characters padded with NULLs, then print it also as a
string.
Using the example program from the "Emulated PTWRITE" section of
tools/perf/Documentation/perf-intel-pt.txt:
$ echo -n "Hello" | od -t x8
0000000 0000006f6c6c6548
0000005
$ perf record -e intel_pt//u ./eg_ptw 0x0000006f6c6c6548
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.016 MB perf.data ]
$ perf script --itrace=ew intel-pt-events.py
Intel PT Branch Trace, Power Events, Event Trace and PTWRITE
Switch In 38524/38524 [001] 24166.044995916 0/0
eg_ptw 38524/38524 [001] 24166.045380004 ptwrite jmp IP: 0 payload: 0x6f6c6c6548 Hello 56532c7ce196 perf_emulate_ptwrite+0x16 (/home/ahunter/git/work/eg_ptw)
End
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20220509152400.376613-4-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
It can be convenient to put a string value into a ptwrite payload as
a quick and easy way to identify what is being printed.
To make that useful, if the Intel ptwrite payload value contains only
printable ASCII characters padded with NULLs, then print it also as a
string.
Using the example program from the "Emulated PTWRITE" section of
tools/perf/Documentation/perf-intel-pt.txt:
$ echo -n "Hello" | od -t x8
0000000 0000006f6c6c6548
0000005
$ perf record -e intel_pt//u ./eg_ptw 0x0000006f6c6c6548
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.016 MB perf.data ]
$ perf script --itrace=ew
eg_ptw 35563 [005] 18256.087338: ptwrite: IP: 0 payload: 0x6f6c6c6548 Hello 55e764db5196 perf_emulate_ptwrite+0x16 (/home/user/eg_ptw)
$
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20220509152400.376613-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
ptwrite is an Intel x86 instruction that writes arbitrary values into an
Intel PT trace. It is not supported on all hardware, so provide an
alternative that makes use of TNT packets to convey the payload data.
TNT packets encode Taken/Not-taken conditional branch information, so
taking branches based on the payload value will encode the value into
the TNT packet. Refer to the changes to the documentation file
perf-intel-pt.txt in this patch for an example.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20220509152400.376613-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
If ATMEL_PM is y but PM is n, build fails:
arch/arm/mach-at91/pm.c:1435:13: error: redefinition of 'at91rm9200_pm_init'
void __init at91rm9200_pm_init(void)
^~~~~~~~~~~~~~~~~~
In file included from arch/arm/mach-at91/pm.c:29:0:
arch/arm/mach-at91/generic.h:19:27: note: previous definition of 'at91rm9200_pm_init' was here
static inline void __init at91rm9200_pm_init(void) { }
^~~~~~~~~~~~~~~~~~
ATMEL_PM should not be enabled independently, it is only selected by Soc.
Fixes: f2f5cf78a333 ("ARM: at91: pm: add support for sama5d2 secure suspend")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220517031606.11628-1-yuehaibing@huawei.com
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
|
|
As an optimisation, only pages mapped with PROT_MTE in user space have
the MTE tags zeroed. This is done lazily at the set_pte_at() time via
mte_sync_tags(). However, this function is missing a barrier and another
CPU may see the PTE updated before the zeroed tags are visible. Add an
smp_wmb() barrier if the mapping is Normal Tagged.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Fixes: 34bfeea4a9e9 ("arm64: mte: Clear the tags when a page is mapped in user-space with PROT_MTE")
Cc: <stable@vger.kernel.org> # 5.10.x
Reported-by: Vladimir Murzin <vladimir.murzin@arm.com>
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Steven Price <steven.price@arm.com>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com>
Link: https://lore.kernel.org/r/20220517093532.127095-1-catalin.marinas@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
In arm64_relocate_new_kernel() we load some fields out of the kimage
structure after relocation has occurred. As the kimage structure isn't
allocated to be relocation-safe, it may be clobbered during relocation,
and we may load junk values out of the structure.
Due to this, kexec may fail when the kimage allocation happens to fall
within a PA range that an object will be relocated to. This has been
observed to occur for regular kexec on a QEMU TCG 'virt' machine with
2GiB of RAM, where the PA range of the new kernel image overlaps the
kimage structure.
Avoid this by ensuring we load all values from the kimage structure
prior to relocation.
I've tested this atop v5.16 and v5.18-rc6.
Fixes: 878fdbd70486 ("arm64: kexec: pass kimage as the only argument to relocation function")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Link: https://lore.kernel.org/r/20220516160735.731404-1-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
During hotplug, the stolen time data structure is unmapped and memset.
There is a possibility of the timer IRQ being triggered before memset
and stolen time is getting updated as part of this timer IRQ handler. This
causes the below crash in timer handler -
[ 3457.473139][ C5] Unable to handle kernel paging request at virtual address ffffffc03df05148
...
[ 3458.154398][ C5] Call trace:
[ 3458.157648][ C5] para_steal_clock+0x30/0x50
[ 3458.162319][ C5] irqtime_account_process_tick+0x30/0x194
[ 3458.168148][ C5] account_process_tick+0x3c/0x280
[ 3458.173274][ C5] update_process_times+0x5c/0xf4
[ 3458.178311][ C5] tick_sched_timer+0x180/0x384
[ 3458.183164][ C5] __run_hrtimer+0x160/0x57c
[ 3458.187744][ C5] hrtimer_interrupt+0x258/0x684
[ 3458.192698][ C5] arch_timer_handler_virt+0x5c/0xa0
[ 3458.198002][ C5] handle_percpu_devid_irq+0xdc/0x414
[ 3458.203385][ C5] handle_domain_irq+0xa8/0x168
[ 3458.208241][ C5] gic_handle_irq.34493+0x54/0x244
[ 3458.213359][ C5] call_on_irq_stack+0x40/0x70
[ 3458.218125][ C5] do_interrupt_handler+0x60/0x9c
[ 3458.223156][ C5] el1_interrupt+0x34/0x64
[ 3458.227560][ C5] el1h_64_irq_handler+0x1c/0x2c
[ 3458.232503][ C5] el1h_64_irq+0x7c/0x80
[ 3458.236736][ C5] free_vmap_area_noflush+0x108/0x39c
[ 3458.242126][ C5] remove_vm_area+0xbc/0x118
[ 3458.246714][ C5] vm_remove_mappings+0x48/0x2a4
[ 3458.251656][ C5] __vunmap+0x154/0x278
[ 3458.255796][ C5] stolen_time_cpu_down_prepare+0xc0/0xd8
[ 3458.261542][ C5] cpuhp_invoke_callback+0x248/0xc34
[ 3458.266842][ C5] cpuhp_thread_fun+0x1c4/0x248
[ 3458.271696][ C5] smpboot_thread_fn+0x1b0/0x400
[ 3458.276638][ C5] kthread+0x17c/0x1e0
[ 3458.280691][ C5] ret_from_fork+0x10/0x20
As a fix, introduce rcu lock to update stolen time structure.
Fixes: 75df529bec91 ("arm64: paravirt: Initialize steal time when cpu is online")
Cc: stable@vger.kernel.org
Suggested-by: Will Deacon <will@kernel.org>
Signed-off-by: Prakruthi Deepak Heragu <quic_pheragu@quicinc.com>
Signed-off-by: Elliot Berman <quic_eberman@quicinc.com>
Reviewed-by: Srivatsa S. Bhat (VMware) <srivatsa@csail.mit.edu>
Link: https://lore.kernel.org/r/20220513174654.362169-1-quic_eberman@quicinc.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Before version 14.0.0 llvm's integrated assembler fails to handle some
displacement variants:
arch/s390/purgatory/head.S:108:10: error: invalid operand for instruction
lg %r11,kernel_type-.base_crash(%r13)
Instead of working around this and given that this is already fixed
raise the minimum clang version from 13.0.0 to 14.0.0.
Acked-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://reviews.llvm.org/D113341
Link: https://lore.kernel.org/r/20220511120532.2228616-9-hca@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Commit ee6d777d3e93 ("s390/decompressor: support extra debug flags")
added extra debug flags, in particular debug info is created,
depending on config options.
With llvm's IAS this causes this compile warning:
arch/s390/boot/head.S:38:1: warning: DWARF2 only supports one section per compilation unit
.section ".head.text","ax"
^
This is a known problem and was addressed with commit b8a9092330da
("Kbuild: do not emit debug info for assembly with LLVM_IAS=1").
Just do the same for s390 to get rid of this warning.
Tested-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20220511120532.2228616-8-hca@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
For at least the mvc and clc instructions llvm's integrated assembler can
generate incorrect code. In particular this happens with decompressor boot
code. The reason seems to be that relocations for the second displacement
of each instruction are at incorrect locations (-/+: gas vs llvm IAS):
mvc __LC_IO_NEW_PSW(16),.Lnewpsw
results in
4: d2 0f 01 f0 00 00 mvc 496(16,%r0),0
- 8: R_390_12 .head.text+0x10
+ 6: R_390_12 .head.text+0x10
and
clc 0(3,%r4),.L_hdr
results in
258: d5 02 40 00 00 00 clc 0(3,%r4),0
- 25c: R_390_12 .head.text+0x324
+ 25a: R_390_12 .head.text+0x324
Workaround this by writing the code in a different way.
Tested-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://github.com/llvm/llvm-project/issues/55411
Link: https://lore.kernel.org/r/20220511120532.2228616-7-hca@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
llvm's integrated assembler cannot handle immediate values which are
calculated with two local labels:
arch/s390/purgatory/head.S:139:11: error: invalid operand for instruction
aghi %r8,-(.base_crash-purgatory_start)
Workaround this by partially rewriting the code.
Link: https://lore.kernel.org/r/20220511120532.2228616-6-hca@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
llvm's integrated assembler cannot handle immediate values which are
calculated with two local labels:
<instantiation>:3:13: error: invalid operand for instruction
clgfi %r14,.Lsie_done - .Lsie_gmap
Workaround this by adding clang specific code which reads the specific
value from memory. Since this code is within the hot paths of the kernel
and adds an additional memory reference, keep the original code, and add
ifdef'ed code.
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Link: https://lore.kernel.org/r/20220511120532.2228616-5-hca@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
clang fails to handle ".if" statements in inline assembly which are heavily
used in the alternatives code.
To work around this remove this code, and enforce that users of
alternatives must specify original and alternative instruction sequences
which have identical sizes. Add a compile time check with two ".org"
statements similar to arm64.
In result not only clang can handle this, but also quite a lot of code can
be removed.
Acked-by: Vasily Gorbik <gor@linux.ibm.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/1356
Link: https://lore.kernel.org/r/20220511120532.2228616-3-hca@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Explicitly provide identical sized original/alternative instruction
sequences. This way there is no need for the s390 specific alternatives
infrastructure to generate padding sequences.
The code which generates such sequences will be removed with a follow on
patch.
Acked-by: Vasily Gorbik <gor@linux.ibm.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20220511120532.2228616-2-hca@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Until now, only the temperature sensors where exported thru
the thermal subsystem. Export the fans as "dell-smm-fan[1-3]" too
to make them available as cooling devices.
Also update Documentation and fix a minor issue with the alphabetic
ordering of the includes.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20220410163935.7840-1-W_Armin@gmx.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Basing on information and testing provided by users [1] add support for
another board, ASUS ProArt X570 Creator WiFi.
[1] https://github.com/zeule/asus-ec-sensors/issues/17
Signed-off-by: Eugene Shalygin <eugene.shalygin@gmail.com>
Link: https://lore.kernel.org/r/20220422111737.1352610-1-eugene.shalygin@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Instead of open-coding the bad characters replacement in the hwmon name,
use the new devm_hwmon_sanitize_name().
Signed-off-by: Michael Walle <michael@walle.cc>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Reviewed-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20220405092452.4033674-3-michael@walle.cc
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
More and more drivers will check for bad characters in the hwmon name
and all are using the same code snippet. Consolidate that code by adding
a new hwmon_sanitize_name() function.
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20220405092452.4033674-2-michael@walle.cc
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Extend aquacomputer_d5next driver to expose hardware temperature sensors
and fans of the Aquacomputer Octo fan controller, which communicates
through a proprietary USB HID protocol.
Four temperature sensors and eight PWM controllable fans are available.
Additionally, serial number, firmware version and power-on count are
exposed through debugfs.
This driver has been tested on x86_64.
Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com>
Link: https://lore.kernel.org/r/20220404134212.9690-1-savicaleksa83@gmail.com
[groeck: Add missing "select CRC16"]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Use devm_delayed_work_autocancel() instead of hand writing it. This is
less verbose and saves a few lines of code.
devm_delayed_work_autocancel() uses devm_add_action() instead of
devm_add_action_or_reset(). This is fine, because if the underlying memory
allocation fails, no work has been scheduled yet. So there is nothing to
undo.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Iwona Winiarska <iwona.winiarska@intel.com>
Link: https://lore.kernel.org/r/fd277a708ede3882d7df6831f02d2e3c0cb813b8.1644781718.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
