summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-01-05drm/amd/pm: improve the fine grain tuning function for RV/RV2/PCOXiaojian Du
This patch is to improve the fine grain tuning function for RV/RV2/PCO. This patch adds two new commands: "restore" and "commit". This function uses the pp_od_clk_voltage sysfs file to configure the min and max value of gfx clock frequency manually or restore the default value. Command guide: echo "s level value" > pp_od_clk_voltage "s" - set the sclk frequency "level" - 0 or 1, "0" represents the min value, "1" represents the max value "value" - the target value of sclk frequency, it should be limited in the safe range echo "r" > pp_od_clk_voltage "r" - reset the sclk frequency, restore the default value instantly echo "c" > pp_od_clk_voltage "c" - commit the min and max value of sclk frequency to the system only after the commit command, the target values set by "s" command will take effect. Example: 1)change power profile from "auto" to "manual" $ cat power_dpm_force_performance_level auto $ echo "manual" > power_dpm_force_performance_level $ cat power_dpm_force_performance_level manual 2)check the default sclk frequency $ cat pp_od_clk_voltage OD_SCLK: 0: 200Mhz 1: 1400Mhz OD_RANGE: SCLK: 200MHz 1400MHz 3)use "s" -- set command to configure the min and max sclk frequency $ echo "s 0 600" > pp_od_clk_voltage $ echo "s 1 1000" > pp_od_clk_voltage $ echo "c" > pp_od_clk_voltage $ cat pp_od_clk_voltage OD_SCLK: 0: 600Mhz 1: 1000Mhz OD_RANGE: SCLK: 200MHz 1400MHz 4)use "r" -- reset command to restore the min or max sclk frequency $ echo "r" > pp_od_clk_voltage $ cat pp_od_clk_voltage OD_SCLK: 0: 200Mhz 1: 1400Mhz OD_RANGE: SCLK: 200MHz 1400MHz Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-01-05drm/amd/pm: enable the "fetch" function of pp_dpm_vclk/dclk for vangoghXiaojian Du
This patch is to enable the "fetch" function of pp_dpm_vclk and pp_dpm_dclk. It allows to fetch the current frequency of vcn and dcn and their DPM levels for vangogh. Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com> Acked-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-01-05drm/amd/pm: add two new sysfs nodes for vangoghXiaojian Du
This patch is to add two new sysfs nodes for vangogh: pp_dpm_dclk and pp_dpm_vclk. The two sysfs nodes are similar to pp_dpm_fclk/memclk/socclk. pp_dpm_dclk represents the DPM frequency of dcn unit. pp_dpm_vclk represents the DPM frequency of vcn unit. Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com> Acked-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-01-05drm/amd/pm: add new feature map macros to resolve duplicate nameXiaojian Du
This patch is to add new feature map macros to resolve duplicate name. Vangogh uses one different format to name some feature bits of swSMU, it causes some duplicate name in the existing feature map list. Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com> Acked-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-01-05drm/amd/pm: add support to umd P-state "fetch" function for vangoghXiaojian Du
This patch is to add supoort to umd P-state function for vangogh. It enables the "fetch" function of 3 sysfs nodes: pp_dpm_mclk, pp_dpm_fclk, pp_dpm_socclk,the function is used to fetch the current frequency of memclk/fclk/socclk. Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com> Acked-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-01-05drm/amd/pm: correct the sensor value of power for vangoghXiaojian Du
This patch is to correct the sensor value of power for vangogh. Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-01-05drm/i915/display/psr: Program plane's calculated offset to plane SF registerJosé Roberto de Souza
It programs Plane's calculated x, y, offset to Plane SF register. It does the calculation of x and y offsets using skl_calc_main_surface_offset(). v3: Update commit message Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Tested-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210104205654.238928-4-jose.souza@intel.com
2021-01-05drm/i915/display: Split and export main surface calculation from ↵José Roberto de Souza
skl_check_main_surface() The calculation the offsets of the main surface will be needed by PSR2 selective fetch code so here splitting and exporting it. No functional changes were done here. v3: Rebased Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Tested-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210104205654.238928-3-jose.souza@intel.com
2021-01-05drm/i915/display/psr: Use plane damage clips to calculate damaged areaJosé Roberto de Souza
Now using plane damage clips property to calcualte the damaged area. Selective fetch only supports one region to be fetched so software needs to calculate a bounding box around all damage clips. Now that we are not complete fetching each plane, there is another loop needed as all the plane areas that intersect with the pipe damaged area needs to be fetched from memory so the complete blending of all planes can happen. v2: - do not shifting new_plane_state->uapi.dst only src is in 16.16 format v4: - setting plane selective fetch area using the whole pipe damage area - mark the whole plane area damaged if plane visibility or alpha changed v5: - taking in consideration src.y1 in the damage coordinates - adding to the pipe damaged area planes that were visible but are invisible in the new state v6: - consider old state plane coordinates when visibility changes or it moved to calculate damaged area - remove from damaged area the portion not in src clip v7: - intersec every damage clip with src to minimize damaged area v8: - adjust pipe_damaged area to 4 lines grouping - adjust calculation now that is understood that uapi.src is the framebuffer coordinates that plane will start to fetch from v9: - Only add plane dst or src to damaged_area if visible - Early skip plane damage calculation if it was not visible in old and new state Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210104205654.238928-2-jose.souza@intel.com
2021-01-05drm: Add function to convert rect in 16.16 fixed format to regular formatJosé Roberto de Souza
Much more clear to read one function call than four lines doing this conversion. v7: - function renamed - calculating width and height before truncate - inlined v10: - renamed parameters from source and destination to src and dst to match sister functions Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: dri-devel@lists.freedesktop.org Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210104205654.238928-1-jose.souza@intel.com
2021-01-05drm/doc: render drm.h uapi docsSimon Ser
It doesn't seem like drm.h docs are included anywhere. Render them next to drm_mode.h, under the "Userspace API Structures" section. This also allows references to e.g. DRM_CAP_* to be properly linkified elsewhere in our docs. Signed-off-by: Simon Ser <contact@emersion.fr> Acked-by: Daniel Vetter <daniel@ffwll.ch> Cc: Pekka Paalanen <ppaalanen@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201222133524.160842-6-contact@emersion.fr
2021-01-05drm/doc: demote old doc-comments in drm.hSimon Ser
Sphinx doesn't like old doc-comments in drm.h and generates warnings like: ./include/uapi/drm/drm.h:87: warning: cannot understand function prototype: 'struct drm_clip_rect ' ./include/uapi/drm/drm.h:97: warning: cannot understand function prototype: 'struct drm_drawable_info ' ./include/uapi/drm/drm.h:105: warning: cannot understand function prototype: 'struct drm_tex_region ' ... Demote these to regular comments, because converting all of them is quite a lot of work (also requires documenting all of the struct fields for instance). Also many of these structures aren't really used by modern user-space. We can easily convert these remaining old comments to Sphinx style on a one-by-one basis. Signed-off-by: Simon Ser <contact@emersion.fr> Acked-by: Daniel Vetter <daniel@ffwll.ch> Cc: Pekka Paalanen <ppaalanen@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201222133524.160842-5-contact@emersion.fr
2021-01-05drm/doc: re-format drm.h file commentSimon Ser
Our documentation build system chokes on \file comments: ./include/uapi/drm/drm.h:2: warning: Cannot understand * \file drm.h on line 2 - I thought it was a doc line Remove all of the slash-directives, and demote to a normal comment. Keep the historical information because it predates Git. v3: keep the comment (Daniel) Signed-off-by: Simon Ser <contact@emersion.fr> Acked-by: Daniel Vetter <daniel@ffwll.ch> Cc: Pekka Paalanen <ppaalanen@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201222133524.160842-4-contact@emersion.fr
2021-01-05drm/i915/selftests: Switch 4k kmalloc to use get_free_page for alignmentChris Wilson
In generating the reference LRC, we want a page-aligned address for simplicity in computing the offsets within. This then shares the computation for the HW LRC which is mapped and so page aligned, making the comparison straightforward. It seems that kmalloc(4k) is not always returning from a 4k-aligned slab cache (which would give us a page aligned address) so force alignment by explicitly allocating a page. Reported-by: "Gote, Nitin R" <nitin.r.gote@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: "Gote, Nitin R" <nitin.r.gote@intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200923114156.17749-1-chris@chris-wilson.co.uk
2021-01-05drm/i915/gt: Check the virtual still matches upon lockingChris Wilson
If another sibling is able to claim the virtual request, by the time we inspect the request under the lock it may no longer match the local engine. Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2877 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Andi Shyti <andi.shyti@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210104115145.24460-4-chris@chris-wilson.co.uk
2021-01-05drm/i915/gt: Allow failed resets without assertionChris Wilson
If the engine reset fails, we will attempt to resume with the current inflight submissions. When that happens, we cannot assert that the engine reset cleared the pending submission, so do not. Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2878 Fixes: 16f2941ad307 ("drm/i915/gt: Replace direct submit with direct call to tasklet") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Andi Shyti <andi.shyti@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210104115145.24460-3-chris@chris-wilson.co.uk
2021-01-05drm/i915: Set rawclk earlier during mmio probeChris Wilson
Older platforms use rawclk to derive the CS clock. rawclk is being determined during intel_device_info_init(), and so that needs to be pushed slightly earlier. Fixes: f170523a7b8e ("drm/i915/gt: Consolidate the CS timestamp clocks") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Andi Shyti <andi.shyti@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210104115145.24460-2-chris@chris-wilson.co.uk
2021-01-05drm/i915/selftests: Set error returnsChris Wilson
A few missed PTR_ERR() upon create_gang() errors. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Andi Shyti <andi.shyti@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210104115145.24460-1-chris@chris-wilson.co.uk
2021-01-05drm: bridge: adv7511: Remove redundant null check before clk_disable_unprepareXu Wang
Because clk_disable_unprepare() already checked NULL clock parameter, so the additional check is unnecessary, just remove them. Signed-off-by: Xu Wang <vulab@iscas.ac.cn> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2021-01-05drm: bridge: dw-hdmi: Remove redundant null check before clk_disable_unprepareXu Wang
Because clk_disable_unprepare() already checked NULL clock parameter, so the additional check is unnecessary, just remove them. Signed-off-by: Xu Wang <vulab@iscas.ac.cn> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2021-01-05dt-bindings: display: bridge: renesas,lvds: RZ/G2E needs renesas,companion tooFabrizio Castro
Document RZ/G2E support for property renesas,companion. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2021-01-05drm: Constify drm_driver in drivers that don't modify itLaurent Pinchart
A non-const structure containing function pointers is a possible attack vector. The drm_driver structure is already const in most drivers, but there are a few exceptions. Constify the structure in the drivers that don't need to modify at, as a low-hanging fruit. The rest of the drivers will need a more complex fix. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2021-01-05drm: Use a const drm_driver for legacy PCI devicesLaurent Pinchart
Now that the legacy PCI support code doesn't need to write to the drm_driver structure, it can be treated as const through the whole DRM core, unconditionally. This allows declaring the structure as const in all drivers, removing one possible attack vector. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2021-01-05drm: Move legacy device list out of drm_driverLaurent Pinchart
The drm_driver structure contains a single field (legacy_dev_list) that is modified by the DRM core, used to store a linked list of legacy DRM devices associated with the driver. In order to make the structure const, move the field out to a global variable. This requires locking access to the global where the local field didn't require serialization, but this only affects legacy drivers, and isn't in any hot path. While at it, compile-out the legacy_dev_list field when DRM_LEGACY isn't defined. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
2021-01-05drm: Don't export the drm_gem_dumb_destroy() functionLaurent Pinchart
The drm_gem_dumb_destroy() isn't used in drivers, don't export it. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2021-01-05drm: zte: Remove unnecessary drm_plane_cleanup() wrapperLaurent Pinchart
Use the drm_plane_cleanup() function directly as the drm_plane_funcs .destroy() handler without creating an unnecessary wrapper around it. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2021-01-05drm: vc4: Remove unnecessary drm_plane_cleanup() wrapperLaurent Pinchart
Use the drm_plane_cleanup() function directly as the drm_plane_funcs .destroy() handler without creating an unnecessary wrapper around it. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Maxime Ripard <mripard@kernel.org> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2021-01-05drm: sti: Remove unnecessary drm_plane_cleanup() wrapperLaurent Pinchart
Use the drm_plane_cleanup() function directly as the drm_plane_funcs .destroy() handler without creating an unnecessary wrapper around it. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2021-01-05drm: arc: Remove unnecessary drm_plane_cleanup() wrapperLaurent Pinchart
Use the drm_plane_cleanup() function directly as the drm_plane_funcs .destroy() handler without creating an unnecessary wrapper around it. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2021-01-05drm: rcar-du: Fix leak of CMM platform device referenceLaurent Pinchart
The device references acquired by of_find_device_by_node() are not released by the driver. Fix this by registering a cleanup action. Fixes: 8de707aeb452 ("drm: rcar-du: kms: Initialize CMM instances") Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
2021-01-05drm: rcar-du: Fix the return check of of_parse_phandle and ↵Wang Xiaojun
of_find_device_by_node of_parse_phandle and of_find_device_by_node may return NULL which cannot be checked by IS_ERR. Fixes: 8de707aeb452 ("drm: rcar-du: kms: Initialize CMM instances") Signed-off-by: Wang Xiaojun <wangxiaojun11@huawei.com> Reported-by: Hulk Robot <hulkci@huawei.com> Acked-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> [Replace -ENODEV with -EINVAL] Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2021-01-05drm: rcar-du: Drop local encoder variableLaurent Pinchart
The local encoder variable is an alias for &renc->base, and is only use twice. It doesn't help much, drop it, along with the rcar_encoder_to_drm_encoder() macro that is then unused. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
2021-01-05drm: rcar-du: Skip encoder allocation for LVDS1 in dual-link modeLaurent Pinchart
The rcar-du driver skips registration of the encoder for the LVDS1 output when LVDS is used in dual-link mode, as the LVDS0 and LVDS1 links are bundled and handled through the LVDS0 output. It however still allocates the encoder and immediately destroys it, which is pointless. Skip allocation of the encoder altogether in that case. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
2021-01-05drm: rcar-du: Replace dev_private with container_ofLaurent Pinchart
Now that drm_device is embedded in rcar_du_device, we can use container_of to get the rcar_du_device pointer from the drm_device, instead of using the drm_device.dev_private field. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
2021-01-05drm: rcar-du: Embed drm_device in rcar_du_deviceLaurent Pinchart
Embedding drm_device in rcar_du_device allows usage of the DRM managed API to allocate both structures in one go, simplifying error handling. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
2021-01-05drm: rcar-du: Use DRM-managed allocation for encodersLaurent Pinchart
devm_kzalloc() is the wrong API to allocate encoders, as the lifetime of the encoders is tied to the DRM device, not the device to driver binding. drmm_kzalloc() isn't a good option either, as it would result in the encoder being freed before being unregistered during the managed cleanup of the DRM objects. Use a plain kzalloc(), and register a drmm action to cleanup the encoder. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
2021-01-05drm: rcar-du: Use DRM-managed allocation for VSP planesLaurent Pinchart
devm_kcalloc() is the wrong API to allocate planes, as the lifetime of the planes is tied to the DRM device, not the device to driver binding. drmm_kcalloc() isn't a good option either, as it would result in the planes being freed before being unregistered during the managed cleanup of the DRM objects. Use a plain kcalloc(), and cleanup the planes and free the memory in the existing rcar_du_vsp_cleanup() handler. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
2021-01-05drm: rcar-du: Drop unneeded encoder cleanup in error pathLaurent Pinchart
The encoder->name field can never be non-null in the error path, as that can only be possible after a successful call to drm_simple_encoder_init(). Drop the cleanup. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
2021-01-05drm: rcar-du: Release vsp device reference in all error pathsLaurent Pinchart
Use drmm_add_action_or_reset() instead of drmm_add_action() to ensure the vsp device reference is released in case the function call fails. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
2021-01-05drm: rcar-du: Fix crash when using LVDS1 clock for CRTCLaurent Pinchart
On D3 and E3 platforms, the LVDS encoder includes a PLL that can generate a clock for the corresponding CRTC, used even when the CRTC output to a non-LVDS port. This mechanism is supported by the driver, but the implementation is broken in dual-link LVDS mode. In that case, the LVDS1 drm_encoder is skipped, which causes a crash when trying to access its bridge later on. Fix this by storing bridge pointers internally instead of retrieving them from the encoder. The rcar_du_device encoders field isn't used anymore and can be dropped. Fixes: 8e8fddab0d0a ("drm: rcar-du: Skip LVDS1 output on Gen3 when using dual-link LVDS mode") Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
2021-01-05drm: Add default modes for connectors in unknown stateLaurent Pinchart
The DRM CRTC helpers add default modes to connectors in the connected state if no mode can be retrieved from the connector. This behaviour is useful for VGA or DVI outputs that have no connected DDC bus. However, in such cases, the status of the output usually can't be retrieved and is reported as connector_status_unknown. Extend the addition of default modes to connectors in an unknown state to support outputs that can retrieve neither the modes nor the connection status. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2021-01-05drm: rcar-du: Fix PM reference leak in rcar_cmm_enable()Qinglang Miao
pm_runtime_get_sync will increment pm usage counter even it failed. Forgetting to putting operation will result in a reference leak here. A new function pm_runtime_resume_and_get is introduced in [0] to keep usage counter balanced. So We fix the reference leak by replacing it with new funtion. [0] dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter") Fixes: e08e934d6c28 ("drm: rcar-du: Add support for CMM") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com> Acked-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2021-01-05drm/bridge: thc63lvd1024: Fix regulator_get_optional() misuseMark Brown
The thc63lvd1024 driver requests a supply using regulator_get_optional() but both the name of the supply and the usage pattern suggest that it is being used for the main power for the device and is not at all optional for the device for function, there is no handling at all for absent supplies. Such regulators should use the vanilla regulator_get() interface, it will ensure that even if a supply is not described in the system integration one will be provided in software. Signed-off-by: Mark Brown <broonie@kernel.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2021-01-05dt-bindings: display: bridge: thc63lvd1024: Document dual-output modeLaurent Pinchart
The DT binding support both dual-input and dual-output mode, but only dual-input is documented. Document dual-output mode. Suggested-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
2021-01-04drm/i915/selftests: Guard against redifinition of SZ_8GChris Wilson
In the near future, upstream will introduce a SZ_8G macro that is slightly different to our own. Employ a temporary ifndef to avoid compilation failure until we have backmerged. References: 8b0fac44bd1f ("sizes.h: add SZ_8G/SZ_16G/SZ_32G macros") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210104171511.32684-1-chris@chris-wilson.co.uk
2021-01-04drm/i915/gt: Rearrange hsw workaroundsChris Wilson
Some rcs0 workarounds were being incorrectly applied to the GT, and so we failed to restore the expected register settings after a reset. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210104114914.30165-2-chris@chris-wilson.co.uk
2021-01-04drm/i915/gt: Rearrange snb workaroundsChris Wilson
Some rcs0 workarounds were being incorrectly applied to the GT, and so we failed to restore the expected register settings after a reset. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210104114914.30165-1-chris@chris-wilson.co.uk
2021-01-04drm/imx: ipuv3-crtc: use drm managed resourcesPhilipp Zabel
Use use drmm_crtc_alloc_with_planes() to align crtc memory lifetime with the drm device. drm_crtc_cleanup() is called automatically before the memory is freed. Also use drmm_add_action_or_reset() to make sure IPU resources are released automatically. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2021-01-04drm/imx: ipuv3-plane: use drm managed resourcesPhilipp Zabel
Use drmm_universal_plane_alloc() to align plane memory lifetime with the drm device. drm_plane_cleanup() is called automatically before the memory is freed. Also move the call to ipu_plane_get_resources() into ipu_plane_init() and use drm managed resources to put IPU resources automatically when required. Handle error return values of the plane property creation functions. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2021-01-04drm/imx: parallel-display: use drm managed resourcesPhilipp Zabel
Use drmm_simple_encoder_alloc() to align encoder memory lifetime with the drm device. drm_encoder_cleanup() is called automatically before the memory is freed. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
generated by cgit (git 2.34.1) at 2025-09-16 07:33:59 +0000