| Age | Commit message (Collapse) | Author |
|---|
|
Bspec is saying this
mask register: Only PSR_MASK[Mask FBC modify] and PSR_MASK[Mask Hotplug]
are used in panel replay mode.
Status register: Only SRD_STATUS[SRD state] field is used in panel replay
mode.
Due to this stop writing and reading registers and bits not used by panel
replay if panel replay is used.
Bspec: 53370, 68920
v2:
- use intel_dp_is_edp with PSR_MASK register
- handle LunarLake as well
- hanle ALPM configuration as well
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240405113602.992714-7-jouni.hogander@intel.com
|
|
On HPD interrupt we want to check if the reason for HPD was some panel
replay error detected by monitor/panel. This is already done for PSR. We
want to do this for panel replay as well. Modify intel_psr_short_pulse to
support panel replay as well.
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240405113602.992714-6-jouni.hogander@intel.com
|
|
Currently panel replay is supporting only main link on mode -> Do not
update phy power state for non-eDP panel replay.
Bspec: 53370
v2: use intel_dp_is_edp to differentiate
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240405113602.992714-5-jouni.hogander@intel.com
|
|
Currently intel_psr_pause and intel_psr_resume do nothing in case of panel
replay. Change them to perform pause and return also in case of panel
replay.
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240405113602.992714-4-jouni.hogander@intel.com
|
|
Current code is setting only intel_crtc_state->has_panel_replay in panel
replay case. There are lots of stuff behind intel_crtc_state->has_psr that
is needed for panel replay as well. Instead of converting each check to
has_psr || has_panel_replay set has_psr in case of panel replay as
well. Code can then differentiate between psr and panel replay by using
intel_crtc_state->has_panel_replay.
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240405113602.992714-3-jouni.hogander@intel.com
|
|
We are adding more boolean variable into intel_psr and intel_crtc_state
structs. Add some documentation about these for sake of clarity.
v2: Modify has_psr + has_panel_replay to mean panel replay
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240405113602.992714-2-jouni.hogander@intel.com
|
|
If we're using the AUX channel for eDP backlight and it fails to probe
for some reason, let's _not_ fail the panel probe.
At least one case where we could fail to init the backlight is because
of a dead or physically missing panel. As talked about in detail in
the earlier patch in this series, ("drm/panel-edp: If we fail to
powerup/get EDID, use conservative timings"), this can cause the
entire system's display pipeline to fail to come up and that's
non-ideal.
If we fail to init the backlight for some transitory reason, we should
dig in and see if there's a way to fix this (perhaps retries?). Even
in that case, though, having a panel whose backlight is stuck at 100%
(the default, at least in the panel Samsung ATNA33XC20 I tested) is
better than having no panel at all.
Reviewed-by: Hsin-Yi Wang <hsinyi@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240325145626.3.I552e8af0ddb1691cc0fe5d27ea3d8020e36f7006@changeid
|
|
If at boot we fail to power up the eDP panel (most often happens if
the eDP panel never asserts HPD to us) or if we are unable to read the
EDID at bootup to figure out the panel's ID then let's use the
conservative eDP panel powerup/powerdown timings but _not_ fail the
probe.
It might seem strange to _not_ fail the probe in this case since we
were unable to powerup the panel and confirm it's there. However,
there is a reason to do this. Specifically, if we fail to probe the
panel then it really throws the whole display pipeline for loop. Most
DRM subsystems are written so that they wait until all components
(including the panel) have probed before they set everything up. When
the panel doesn't come up then this never happens. As a side effect of
not setting everything up then other display adapters don't get
initialized. As a practical example, I can see that if I open up a
sc7180-trogdor based Chromebook that's using the generic "edp-panel"
and unplug the eDP panel that it causes the _external_ DP monitor not
to function. This is obviously bad because it means that a device with
a dead eDP panel becomes e-waste when it could instead still be given
useful life with an external display.
NOTES:
- When we fail to probe like this, boot is a bit slow because we try
several times to power the panel up. This doesn't feel horrible
because it'll eventually work and the retries are known to help
bring some panels up.
- In the case where we hit the condition of failing to power up, the
display will likely _never_ have a chance to work again until
reboot. Once the panel-edp pm_runtime resume function fails it
doesn't ever seem to retry. This is probably for the best given that
we don't have any real timing/modes. eDP isn't expected to be
"hotplugged" so this makes some sense.
- It turns out that this makes panel-edp behave more similarly for
users of the generic "edp-panel" compatible string and the old fixed
panel compatible string. With the old fixed panel compatible string
we don't talk to the panel during probe so we'd actually behave much
the same way that we'll now behave for the generic "edp-panel".
Reviewed-by: Hsin-Yi Wang <hsinyi@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240325145626.2.Ia7a55a9657b0b6aa4644fd497a0bc595a771258c@changeid
|
|
If we're using the generic "edp-panel" compatible string and we fail
to detect an eDP panel then we fall back to conservative timings for
powering up and powering down the panel. Abstract out the function for
setting these timings so it can be used in future patches.
No functional change expected--just code movement.
Reviewed-by: Hsin-Yi Wang <hsinyi@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240325145626.1.I659b2517d9f619d09e804e071591ecab76335dfb@changeid
|
|
- Fix a runtime PM deadlock with clk disable unused
* clk-rpm:
clk: Get runtime PM before walking tree for clk_summary
clk: Get runtime PM before walking tree during disable_unused
clk: Initialize struct clk_core kref earlier
clk: Don't hold prepare_lock when calling kref_put()
clk: Remove prepare_lock hold assertion in __clk_release()
|
|
Similar to the previous commit, we should make sure that all devices are
runtime resumed before printing the clk_summary through debugfs. Failure
to do so would result in a deadlock if the thread is resuming a device
to print clk state and that device is also runtime resuming in another
thread, e.g the screen is turning on and the display driver is starting
up. We remove the calls to clk_pm_runtime_{get,put}() in this path
because they're superfluous now that we know the devices are runtime
resumed. This also squashes a bug where the return value of
clk_pm_runtime_get() wasn't checked, leading to an RPM count underflow
on error paths.
Fixes: 1bb294a7981c ("clk: Enable/Disable runtime PM for clk_summary")
Cc: Taniya Das <quic_tdas@quicinc.com>
Cc: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20240325184204.745706-6-sboyd@kernel.org
Reviewed-by: Douglas Anderson <dianders@chromium.org>
|
|
Doug reported [1] the following hung task:
INFO: task swapper/0:1 blocked for more than 122 seconds.
Not tainted 5.15.149-21875-gf795ebc40eb8 #1
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:swapper/0 state:D stack: 0 pid: 1 ppid: 0 flags:0x00000008
Call trace:
__switch_to+0xf4/0x1f4
__schedule+0x418/0xb80
schedule+0x5c/0x10c
rpm_resume+0xe0/0x52c
rpm_resume+0x178/0x52c
__pm_runtime_resume+0x58/0x98
clk_pm_runtime_get+0x30/0xb0
clk_disable_unused_subtree+0x58/0x208
clk_disable_unused_subtree+0x38/0x208
clk_disable_unused_subtree+0x38/0x208
clk_disable_unused_subtree+0x38/0x208
clk_disable_unused_subtree+0x38/0x208
clk_disable_unused+0x4c/0xe4
do_one_initcall+0xcc/0x2d8
do_initcall_level+0xa4/0x148
do_initcalls+0x5c/0x9c
do_basic_setup+0x24/0x30
kernel_init_freeable+0xec/0x164
kernel_init+0x28/0x120
ret_from_fork+0x10/0x20
INFO: task kworker/u16:0:9 blocked for more than 122 seconds.
Not tainted 5.15.149-21875-gf795ebc40eb8 #1
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:kworker/u16:0 state:D stack: 0 pid: 9 ppid: 2 flags:0x00000008
Workqueue: events_unbound deferred_probe_work_func
Call trace:
__switch_to+0xf4/0x1f4
__schedule+0x418/0xb80
schedule+0x5c/0x10c
schedule_preempt_disabled+0x2c/0x48
__mutex_lock+0x238/0x488
__mutex_lock_slowpath+0x1c/0x28
mutex_lock+0x50/0x74
clk_prepare_lock+0x7c/0x9c
clk_core_prepare_lock+0x20/0x44
clk_prepare+0x24/0x30
clk_bulk_prepare+0x40/0xb0
mdss_runtime_resume+0x54/0x1c8
pm_generic_runtime_resume+0x30/0x44
__genpd_runtime_resume+0x68/0x7c
genpd_runtime_resume+0x108/0x1f4
__rpm_callback+0x84/0x144
rpm_callback+0x30/0x88
rpm_resume+0x1f4/0x52c
rpm_resume+0x178/0x52c
__pm_runtime_resume+0x58/0x98
__device_attach+0xe0/0x170
device_initial_probe+0x1c/0x28
bus_probe_device+0x3c/0x9c
device_add+0x644/0x814
mipi_dsi_device_register_full+0xe4/0x170
devm_mipi_dsi_device_register_full+0x28/0x70
ti_sn_bridge_probe+0x1dc/0x2c0
auxiliary_bus_probe+0x4c/0x94
really_probe+0xcc/0x2c8
__driver_probe_device+0xa8/0x130
driver_probe_device+0x48/0x110
__device_attach_driver+0xa4/0xcc
bus_for_each_drv+0x8c/0xd8
__device_attach+0xf8/0x170
device_initial_probe+0x1c/0x28
bus_probe_device+0x3c/0x9c
deferred_probe_work_func+0x9c/0xd8
process_one_work+0x148/0x518
worker_thread+0x138/0x350
kthread+0x138/0x1e0
ret_from_fork+0x10/0x20
The first thread is walking the clk tree and calling
clk_pm_runtime_get() to power on devices required to read the clk
hardware via struct clk_ops::is_enabled(). This thread holds the clk
prepare_lock, and is trying to runtime PM resume a device, when it finds
that the device is in the process of resuming so the thread schedule()s
away waiting for the device to finish resuming before continuing. The
second thread is runtime PM resuming the same device, but the runtime
resume callback is calling clk_prepare(), trying to grab the
prepare_lock waiting on the first thread.
This is a classic ABBA deadlock. To properly fix the deadlock, we must
never runtime PM resume or suspend a device with the clk prepare_lock
held. Actually doing that is near impossible today because the global
prepare_lock would have to be dropped in the middle of the tree, the
device runtime PM resumed/suspended, and then the prepare_lock grabbed
again to ensure consistency of the clk tree topology. If anything
changes with the clk tree in the meantime, we've lost and will need to
start the operation all over again.
Luckily, most of the time we're simply incrementing or decrementing the
runtime PM count on an active device, so we don't have the chance to
schedule away with the prepare_lock held. Let's fix this immediate
problem that can be triggered more easily by simply booting on Qualcomm
sc7180.
Introduce a list of clk_core structures that have been registered, or
are in the process of being registered, that require runtime PM to
operate. Iterate this list and call clk_pm_runtime_get() on each of them
without holding the prepare_lock during clk_disable_unused(). This way
we can be certain that the runtime PM state of the devices will be
active and resumed so we can't schedule away while walking the clk tree
with the prepare_lock held. Similarly, call clk_pm_runtime_put() without
the prepare_lock held to properly drop the runtime PM reference. We
remove the calls to clk_pm_runtime_{get,put}() in this path because
they're superfluous now that we know the devices are runtime resumed.
Reported-by: Douglas Anderson <dianders@chromium.org>
Closes: https://lore.kernel.org/all/20220922084322.RFC.2.I375b6b9e0a0a5348962f004beb3dafee6a12dfbb@changeid/ [1]
Closes: https://issuetracker.google.com/328070191
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Fixes: 9a34b45397e5 ("clk: Add support for runtime PM")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20240325184204.745706-5-sboyd@kernel.org
Reviewed-by: Douglas Anderson <dianders@chromium.org>
|
|
Initialize this kref once we allocate memory for the struct clk_core so
that we can reuse the release function to free any memory associated
with the structure. This mostly consolidates code, but also clarifies
that the kref lifetime exists once the container structure (struct
clk_core) is allocated instead of leaving it in a half-baked state for
most of __clk_core_init().
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20240325184204.745706-4-sboyd@kernel.org
|
|
We don't need to hold the prepare_lock when dropping a ref on a struct
clk_core. The release function is only freeing memory and any code with
a pointer reference has already unlinked anything pointing to the
clk_core. This reduces the holding area of the prepare_lock a bit.
Note that we also don't call free_clk() with the prepare_lock held.
There isn't any reason to do that.
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20240325184204.745706-3-sboyd@kernel.org
|
|
Removing this assertion lets us move the kref_put() call outside the
prepare_lock section. We don't need to hold the prepare_lock here to
free memory and destroy the clk_core structure. We've already unlinked
the clk from the clk tree and by the time the release function runs
nothing holds a reference to the clk_core anymore so anything with the
pointer can't access the memory that's being freed anyway. Way back in
commit 496eadf821c2 ("clk: Use lockdep asserts to find missing hold of
prepare_lock") we didn't need to have this assertion either.
Fixes: 496eadf821c2 ("clk: Use lockdep asserts to find missing hold of prepare_lock")
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20240325184204.745706-2-sboyd@kernel.org
|
|
When one stacking device is over one device with virt_boundary_mask and
another one with max segment size, the stacking device have both limits
set. This way is allowed before d690cb8ae14b ("block: add an API to
atomically update queue limits").
Relax the limit so that we won't break such kind of stacking setting.
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218687
Reported-by: janpieter.sollie@edpnet.be
Fixes: d690cb8ae14b ("block: add an API to atomically update queue limits")
Link: https://lore.kernel.org/linux-block/ZfGl8HzUpiOxCLm3@fedora/
Cc: Christoph Hellwig <hch@lst.de>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: dm-devel@lists.linux.dev
Cc: Song Liu <song@kernel.org>
Cc: linux-raid@vger.kernel.org
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Mike Snitzer <snitzer@kernel.org>
Link: https://lore.kernel.org/r/20240407131931.4055231-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Multiple gendisk instances can allocated/added for single request queue
in case of disk rebind. blkg may still stay in q->blkg_list when calling
blkcg_init_disk() for rebind, then q->blkg_list becomes corrupted.
Fix the list corruption issue by:
- add blkg_init_queue() to initialize q->blkg_list & q->blkcg_mutex only
- move calling blkg_init_queue() into blk_alloc_queue()
The list corruption should be started since commit f1c006f1c685 ("blk-cgroup:
synchronize pd_free_fn() from blkg_free_workfn() and blkcg_deactivate_policy()")
which delays removing blkg from q->blkg_list into blkg_free_workfn().
Fixes: f1c006f1c685 ("blk-cgroup: synchronize pd_free_fn() from blkg_free_workfn() and blkcg_deactivate_policy()")
Fixes: 1059699f87eb ("block: move blkcg initialization/destroy into disk allocation/release handler")
Cc: Yu Kuai <yukuai3@huawei.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20240407125910.4053377-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
bch2_acl_from_disk() uses allocate_dropping_locks, and can thus return
a transaction restart - this wasn't handled.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for v6.10:
Core Changes:
- Fix DRM_DISPLAY_DP_HELPER dependencies.
Driver Changes:
- i2c and polling fixes to ast.
- Small fixes to panthor.
- Allow IRQ to share GPIO pins in bridge/adv7511.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/2ad89d5a-4096-4cc5-badb-4ad61ff1df7d@linux.intel.com
|
|
|
|
When allocating bkey_cached from bc->freed_pcpu list, it missed
decreasing the count of nr_freed_pcpu which would cause the mismatch
between the value of nr_freed_pcpu and the list items. This problem
also exists in moving new bkey_cached to bc->freed_pcpu list.
If these happened, the bug info may appear in
bch2_fs_btree_key_cache_exit by the follow code:
BUG_ON(list_count_nodes(&bc->freed_pcpu) != bc->nr_freed_pcpu);
BUG_ON(list_count_nodes(&bc->freed_nonpcpu) != bc->nr_freed_nonpcpu);
Fixes: c65c13f0eac6 ("bcachefs: Run btree key cache shrinker less aggressively")
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
- Fix MCE timer reinit locking
- Fix/improve CoCo guest random entropy pool init
- Fix SEV-SNP late disable bugs
- Fix false positive objtool build warning
- Fix header dependency bug
- Fix resctrl CPU offlining bug
* tag 'x86-urgent-2024-04-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/retpoline: Add NOENDBR annotation to the SRSO dummy return thunk
x86/mce: Make sure to grab mce_sysfs_mutex in set_bank()
x86/CPU/AMD: Track SNP host status with cc_platform_*()
x86/cc: Add cc_platform_set/_clear() helpers
x86/kvm/Kconfig: Have KVM_AMD_SEV select ARCH_HAS_CC_PLATFORM
x86/coco: Require seeding RNG with RDRAND on CoCo systems
x86/numa/32: Include missing <asm/pgtable_areas.h>
x86/resctrl: Fix uninitialized memory read when last CPU of domain goes offline
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Ingo Molnar:
"Fix various timer bugs:
- Fix a timer migration bug that may result in missed events
- Fix timer migration group hierarchy event updates
- Fix a PowerPC64 build warning
- Fix a handful of DocBook annotation bugs"
* tag 'timers-urgent-2024-04-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timers/migration: Return early on deactivation
timers/migration: Fix ignored event due to missing CPU update
vdso: Use CONFIG_PAGE_SHIFT in vdso/datapage.h
timers: Fix text inconsistencies and spelling
tick/sched: Fix struct tick_sched doc warnings
tick/sched: Fix various kernel-doc warnings
timers: Fix kernel-doc format and add Return values
time/timekeeping: Fix kernel-doc warnings and typos
time/timecounter: Fix inline documentation
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 perf fix from Ingo Molnar:
"Fix a combined PEBS events bug on x86 Intel CPUs"
* tag 'perf-urgent-2024-04-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel/ds: Don't clear ->pebs_data_cfg for the last PEBS event
|
|
Inorder to support shaping and scheduling, Upon class creation
Netdev driver allocates trasmit schedulers.
The previous patch which added support for Round robin scheduling has
a bug due to which driver is not freeing transmit schedulers post
class deletion.
This patch fixes the same.
Fixes: 47a9656f168a ("octeontx2-pf: htb offload support for Round Robin scheduling")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There is a bug when setting the RSS options in virtio_net that can break
the whole machine, getting the kernel into an infinite loop.
Running the following command in any QEMU virtual machine with virtionet
will reproduce this problem:
# ethtool -X eth0 hfunc toeplitz
This is how the problem happens:
1) ethtool_set_rxfh() calls virtnet_set_rxfh()
2) virtnet_set_rxfh() calls virtnet_commit_rss_command()
3) virtnet_commit_rss_command() populates 4 entries for the rss
scatter-gather
4) Since the command above does not have a key, then the last
scatter-gatter entry will be zeroed, since rss_key_size == 0.
sg_buf_size = vi->rss_key_size;
5) This buffer is passed to qemu, but qemu is not happy with a buffer
with zero length, and do the following in virtqueue_map_desc() (QEMU
function):
if (!sz) {
virtio_error(vdev, "virtio: zero sized buffers are not allowed");
6) virtio_error() (also QEMU function) set the device as broken
vdev->broken = true;
7) Qemu bails out, and do not repond this crazy kernel.
8) The kernel is waiting for the response to come back (function
virtnet_send_command())
9) The kernel is waiting doing the following :
while (!virtqueue_get_buf(vi->cvq, &tmp) &&
!virtqueue_is_broken(vi->cvq))
cpu_relax();
10) None of the following functions above is true, thus, the kernel
loops here forever. Keeping in mind that virtqueue_is_broken() does
not look at the qemu `vdev->broken`, so, it never realizes that the
vitio is broken at QEMU side.
Fix it by not sending RSS commands if the feature is not available in
the device.
Fixes: c7114b1249fa ("drivers/net/virtio_net: Added basic RSS support.")
Cc: stable@vger.kernel.org
Cc: qemu-devel@nongnu.org
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Heng Qi <hengqi@linux.alibaba.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
During the removal of the idxd driver, registered offline callback is
invoked as part of the clean up process. However, on systems with only
one CPU online, no valid target is available to migrate the
perf context, resulting in a kernel oops:
BUG: unable to handle page fault for address: 000000000002a2b8
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
PGD 1470e1067 P4D 0
Oops: 0002 [#1] PREEMPT SMP NOPTI
CPU: 0 PID: 20 Comm: cpuhp/0 Not tainted 6.8.0-rc6-dsa+ #57
Hardware name: Intel Corporation AvenueCity/AvenueCity, BIOS BHSDCRB1.86B.2492.D03.2307181620 07/18/2023
RIP: 0010:mutex_lock+0x2e/0x50
...
Call Trace:
<TASK>
__die+0x24/0x70
page_fault_oops+0x82/0x160
do_user_addr_fault+0x65/0x6b0
__pfx___rdmsr_safe_on_cpu+0x10/0x10
exc_page_fault+0x7d/0x170
asm_exc_page_fault+0x26/0x30
mutex_lock+0x2e/0x50
mutex_lock+0x1e/0x50
perf_pmu_migrate_context+0x87/0x1f0
perf_event_cpu_offline+0x76/0x90 [idxd]
cpuhp_invoke_callback+0xa2/0x4f0
__pfx_perf_event_cpu_offline+0x10/0x10 [idxd]
cpuhp_thread_fun+0x98/0x150
smpboot_thread_fn+0x27/0x260
smpboot_thread_fn+0x1af/0x260
__pfx_smpboot_thread_fn+0x10/0x10
kthread+0x103/0x140
__pfx_kthread+0x10/0x10
ret_from_fork+0x31/0x50
__pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1b/0x30
<TASK>
Fix the issue by preventing the migration of the perf context to an
invalid target.
Fixes: 81dd4d4d6178 ("dmaengine: idxd: Add IDXD performance monitor support")
Reported-by: Terrence Xu <terrence.xu@intel.com>
Tested-by: Terrence Xu <terrence.xu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Link: https://lore.kernel.org/r/20240313214031.1658045-1-fenghua.yu@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Clarify the kernel doc of xdma_fill_descs(), especially how big chunks
will be handled.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
Link: https://lore.kernel.org/stable/20240327-digigram-xdma-fixes-v1-3-45f4a52c0283%40bootlin.com
Link: https://lore.kernel.org/r/20240327-digigram-xdma-fixes-v1-3-45f4a52c0283@bootlin.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The current xdma_synchronize method does not properly wait for the last
transfer to be done. Due to limitations of the XMDA engine, it is not
possible to stop a transfer in the middle of a descriptor. Said
otherwise, if a stop is requested at the end of descriptor "N" and the OS
is fast enough, the DMA controller will effectively stop immediately.
However, if the OS is slightly too slow to request the stop and the DMA
engine starts descriptor "N+1", the N+1 transfer will be performed until
its end. This means that after a terminate_all, the last descriptor must
remain valid and the synchronization must wait for this last descriptor to
be terminated.
Fixes: 855c2e1d1842 ("dmaengine: xilinx: xdma: Rework xdma_terminate_all()")
Fixes: f5c392d106e7 ("dmaengine: xilinx: xdma: Add terminate_all/synchronize callbacks")
Cc: stable@vger.kernel.org
Suggested-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
Link: https://lore.kernel.org/r/20240327-digigram-xdma-fixes-v1-2-45f4a52c0283@bootlin.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
descriptor
The addition of interleaved transfers slightly changed the way
addresses inside DMA descriptors are derived, breaking cyclic
transfers.
Fixes: 3e184e64c2e5 ("dmaengine: xilinx: xdma: Prepare the introduction of interleaved DMA transfers")
Cc: stable@vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
Link: https://lore.kernel.org/r/20240327-digigram-xdma-fixes-v1-1-45f4a52c0283@bootlin.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
There are several places where either chan->lock or chan->vchan.lock was
not held. Add appropriate locking. This fixes lockdep warnings like
[ 31.077578] ------------[ cut here ]------------
[ 31.077831] WARNING: CPU: 2 PID: 40 at drivers/dma/xilinx/xilinx_dpdma.c:834 xilinx_dpdma_chan_queue_transfer+0x274/0x5e0
[ 31.077953] Modules linked in:
[ 31.078019] CPU: 2 PID: 40 Comm: kworker/u12:1 Not tainted 6.6.20+ #98
[ 31.078102] Hardware name: xlnx,zynqmp (DT)
[ 31.078169] Workqueue: events_unbound deferred_probe_work_func
[ 31.078272] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 31.078377] pc : xilinx_dpdma_chan_queue_transfer+0x274/0x5e0
[ 31.078473] lr : xilinx_dpdma_chan_queue_transfer+0x270/0x5e0
[ 31.078550] sp : ffffffc083bb2e10
[ 31.078590] x29: ffffffc083bb2e10 x28: 0000000000000000 x27: ffffff880165a168
[ 31.078754] x26: ffffff880164e920 x25: ffffff880164eab8 x24: ffffff880164d480
[ 31.078920] x23: ffffff880165a148 x22: ffffff880164e988 x21: 0000000000000000
[ 31.079132] x20: ffffffc082aa3000 x19: ffffff880164e880 x18: 0000000000000000
[ 31.079295] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
[ 31.079453] x14: 0000000000000000 x13: ffffff8802263dc0 x12: 0000000000000001
[ 31.079613] x11: 0001ffc083bb2e34 x10: 0001ff880164e98f x9 : 0001ffc082aa3def
[ 31.079824] x8 : 0001ffc082aa3dec x7 : 0000000000000000 x6 : 0000000000000516
[ 31.079982] x5 : ffffffc7f8d43000 x4 : ffffff88003c9c40 x3 : ffffffffffffffff
[ 31.080147] x2 : ffffffc7f8d43000 x1 : 00000000000000c0 x0 : 0000000000000000
[ 31.080307] Call trace:
[ 31.080340] xilinx_dpdma_chan_queue_transfer+0x274/0x5e0
[ 31.080518] xilinx_dpdma_issue_pending+0x11c/0x120
[ 31.080595] zynqmp_disp_layer_update+0x180/0x3ac
[ 31.080712] zynqmp_dpsub_plane_atomic_update+0x11c/0x21c
[ 31.080825] drm_atomic_helper_commit_planes+0x20c/0x684
[ 31.080951] drm_atomic_helper_commit_tail+0x5c/0xb0
[ 31.081139] commit_tail+0x234/0x294
[ 31.081246] drm_atomic_helper_commit+0x1f8/0x210
[ 31.081363] drm_atomic_commit+0x100/0x140
[ 31.081477] drm_client_modeset_commit_atomic+0x318/0x384
[ 31.081634] drm_client_modeset_commit_locked+0x8c/0x24c
[ 31.081725] drm_client_modeset_commit+0x34/0x5c
[ 31.081812] __drm_fb_helper_restore_fbdev_mode_unlocked+0x104/0x168
[ 31.081899] drm_fb_helper_set_par+0x50/0x70
[ 31.081971] fbcon_init+0x538/0xc48
[ 31.082047] visual_init+0x16c/0x23c
[ 31.082207] do_bind_con_driver.isra.0+0x2d0/0x634
[ 31.082320] do_take_over_console+0x24c/0x33c
[ 31.082429] do_fbcon_takeover+0xbc/0x1b0
[ 31.082503] fbcon_fb_registered+0x2d0/0x34c
[ 31.082663] register_framebuffer+0x27c/0x38c
[ 31.082767] __drm_fb_helper_initial_config_and_unlock+0x5c0/0x91c
[ 31.082939] drm_fb_helper_initial_config+0x50/0x74
[ 31.083012] drm_fbdev_dma_client_hotplug+0xb8/0x108
[ 31.083115] drm_client_register+0xa0/0xf4
[ 31.083195] drm_fbdev_dma_setup+0xb0/0x1cc
[ 31.083293] zynqmp_dpsub_drm_init+0x45c/0x4e0
[ 31.083431] zynqmp_dpsub_probe+0x444/0x5e0
[ 31.083616] platform_probe+0x8c/0x13c
[ 31.083713] really_probe+0x258/0x59c
[ 31.083793] __driver_probe_device+0xc4/0x224
[ 31.083878] driver_probe_device+0x70/0x1c0
[ 31.083961] __device_attach_driver+0x108/0x1e0
[ 31.084052] bus_for_each_drv+0x9c/0x100
[ 31.084125] __device_attach+0x100/0x298
[ 31.084207] device_initial_probe+0x14/0x20
[ 31.084292] bus_probe_device+0xd8/0xdc
[ 31.084368] deferred_probe_work_func+0x11c/0x180
[ 31.084451] process_one_work+0x3ac/0x988
[ 31.084643] worker_thread+0x398/0x694
[ 31.084752] kthread+0x1bc/0x1c0
[ 31.084848] ret_from_fork+0x10/0x20
[ 31.084932] irq event stamp: 64549
[ 31.084970] hardirqs last enabled at (64548): [<ffffffc081adf35c>] _raw_spin_unlock_irqrestore+0x80/0x90
[ 31.085157] hardirqs last disabled at (64549): [<ffffffc081adf010>] _raw_spin_lock_irqsave+0xc0/0xdc
[ 31.085277] softirqs last enabled at (64503): [<ffffffc08001071c>] __do_softirq+0x47c/0x500
[ 31.085390] softirqs last disabled at (64498): [<ffffffc080017134>] ____do_softirq+0x10/0x1c
[ 31.085501] ---[ end trace 0000000000000000 ]---
Fixes: 7cbb0c63de3f ("dmaengine: xilinx: dpdma: Add the Xilinx DisplayPort DMA engine driver")
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://lore.kernel.org/r/20240308210034.3634938-2-sean.anderson@linux.dev
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
drain_workqueue() cannot be called safely in a spinlocked context due to
possible task rescheduling. In the multi-task scenario, calling
queue_work() while drain_workqueue() will lead to a Call Trace as
pushing a work on a draining workqueue is not permitted in spinlocked
context.
Call Trace:
<TASK>
? __warn+0x7d/0x140
? __queue_work+0x2b2/0x440
? report_bug+0x1f8/0x200
? handle_bug+0x3c/0x70
? exc_invalid_op+0x18/0x70
? asm_exc_invalid_op+0x1a/0x20
? __queue_work+0x2b2/0x440
queue_work_on+0x28/0x30
idxd_misc_thread+0x303/0x5a0 [idxd]
? __schedule+0x369/0xb40
? __pfx_irq_thread_fn+0x10/0x10
? irq_thread+0xbc/0x1b0
irq_thread_fn+0x21/0x70
irq_thread+0x102/0x1b0
? preempt_count_add+0x74/0xa0
? __pfx_irq_thread_dtor+0x10/0x10
? __pfx_irq_thread+0x10/0x10
kthread+0x103/0x140
? __pfx_kthread+0x10/0x10
ret_from_fork+0x31/0x50
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1b/0x30
</TASK>
The current implementation uses a spinlock to protect event log workqueue
and will lead to the Call Trace due to potential task rescheduling.
To address the locking issue, convert the spinlock to mutex, allowing
the drain_workqueue() to be called in a safe mutex-locked context.
This change ensures proper synchronization when accessing the event log
workqueue, preventing potential Call Trace and improving the overall
robustness of the code.
Fixes: c40bd7d9737b ("dmaengine: idxd: process user page faults for completion record")
Signed-off-by: Rex Zhang <rex.zhang@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Reviewed-by: Lijun Pan <lijun.pan@intel.com>
Link: https://lore.kernel.org/r/20240404223949.2885604-1-fenghua.yu@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
According to the 'qcom,ipq5332-usb-hsphy.yaml' schema, the 5V
supply regulator must be defined via the 'vdd-supply' property.
The driver however requests for the 'vdda-phy' regulator which
results in the following message when the driver is probed on
a IPQ5018 based board with a device tree matching to the schema:
qcom-m31usb-phy 5b000.phy: supply vdda-phy not found, using dummy regulator
qcom-m31usb-phy 5b000.phy: Registered M31 USB phy
This means that the regulator specified in the device tree never
gets enabled.
Change the driver to use the 'vdd' name for the regulator as per
defined in the schema in order to ensure that the corresponding
regulator gets enabled.
Fixes: 08e49af50701 ("phy: qcom: Introduce M31 USB PHY driver")
Reviewed-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240406-phy-qcom-m31-regulator-fix-v2-1-c8e9795bc071@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Calibrated data was written into an incorrect register, which cause
speaker protection sometimes malfuctions
Fixes: 5be27f1e3ec9 ("ALSA: hda/tas2781: Add tas2781 HDA driver")
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Cc: <stable@vger.kernel.org>
Message-ID: <20240406132010.341-1-shenghao-ding@ti.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Add support for HP SnowWhite laptops with CS35L51 amplifiers on I2C
bus connected to Realtek codec.
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Message-ID: <20240405210635.22193-1-vitalyr@opensource.cirrus.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Multiple bug fixes for journal iters:
- When the journal keys gap buffer is resized, we have to adjust the
iterators for moving the gap to the end
- We don't want to rewind iterators to point to the key we just
inserted if it's not for the correct btree/level
Also, add some new assertions.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
The struct field swap can collide with the swap() macro defined in
linux/minmax.h. Rename the struct field to prevent such collisions.
Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Now that bcachefs docs exist in Documentation/filesystems/bcachefs/,
cover it in MAINTAINERS entry for the filesystem.
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Commit eb386617be4bdf ("bcachefs: Errcode tracepoint, documentation")
adds initial bcachefs documentation (private error codes) but without
any table of contents tree for the filesystem docs, hence Sphinx warns:
Documentation/filesystems/bcachefs/errorcodes.rst: WARNING: document isn't included in any toctree
Add bcachefs toctree to fix above warning.
Fixes: eb386617be4b ("bcachefs: Errcode tracepoint, documentation")
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
"bcachefs; Fix deadlock in bch2_btree_update_start()" was a significant
performance regression (nearly 50%) on multithreaded random writes with
fio.
The reason is that the journal watermark checks multiple things,
including the state of the btree write buffer, and on multithreaded
update heavy workloads we're bottleneked on write buffer flushing - we
don't want kicknig off btree updates to depend on the state of the write
buffer.
This isn't strictly correct; the interior btree update path does do
write buffer updates, but it's a tiny fraction of total accounting
updates and we're more concerned with space in the journal itself.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
BCH_IOCTL_FSCK_OFFLINE allows the userspace fsck tool to use the kernel
implementation of fsck - primarily when the kernel version is a better
version match.
It should look and act exactly like the normal userspace fsck that the
user expected to be invoking, so errors should never result in a kernel
panic.
We may want to consider further restricting errors=panic - it's only
intended for debugging in controlled test environments, it should have
no purpose it normal usage.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
To open an encrypted filesystem, we use request_key() to get the
encryption key from the user's keyring - but request_key() needs to
happen in the context of the process that invoked the ioctl.
This easily fixed by using bch2_fs_open() in nostart mode.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
- Address a slow memory leak with RPC-over-TCP
- Prevent another NFS4ERR_DELAY loop during CREATE_SESSION
* tag 'nfsd-6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
nfsd: hold a lighter-weight client reference over CB_RECALL_ANY
SUNRPC: Fix a slow server-side memory leak with RPC-over-TCP
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fix from Wolfram Sang:
"A host driver build fix"
* tag 'i2c-for-6.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: pxa: hide unused icr_bits[] variable
|
|
Pull xfs fix from Chandan Babu:
- Allow creating new links to special files which were not associated
with a project quota
* tag 'xfs-6.9-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: allow cross-linking special files without project quota
|
|
Pull smb client fixes from Steve French:
- fix to retry close to avoid potential handle leaks when server
returns EBUSY
- DFS fixes including a fix for potential use after free
- fscache fix
- minor strncpy cleanup
- reconnect race fix
- deal with various possible UAF race conditions tearing sessions down
* tag '6.9-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb: client: fix potential UAF in cifs_signal_cifsd_for_reconnect()
smb: client: fix potential UAF in smb2_is_network_name_deleted()
smb: client: fix potential UAF in is_valid_oplock_break()
smb: client: fix potential UAF in smb2_is_valid_oplock_break()
smb: client: fix potential UAF in smb2_is_valid_lease_break()
smb: client: fix potential UAF in cifs_stats_proc_show()
smb: client: fix potential UAF in cifs_stats_proc_write()
smb: client: fix potential UAF in cifs_dump_full_key()
smb: client: fix potential UAF in cifs_debug_files_proc_show()
smb3: retrying on failed server close
smb: client: serialise cifs_construct_tcon() with cifs_mount_mutex
smb: client: handle DFS tcons in cifs_construct_tcon()
smb: client: refresh referral without acquiring refpath_lock
smb: client: guarantee refcounted children from parent session
cifs: Fix caching to try to do open O_WRONLY as rdwr on server
smb: client: fix UAF in smb2_reconnect_server()
smb: client: replace deprecated strncpy with strscpy
|
|
srso_alias_untrain_ret() is special code, even if it is a dummy
which is called in the !SRSO case, so annotate it like its real
counterpart, to address the following objtool splat:
vmlinux.o: warning: objtool: .export_symbol+0x2b290: data relocation to !ENDBR: srso_alias_untrain_ret+0x0
Fixes: 4535e1a4174c ("x86/bugs: Fix the SRSO mitigation on Zen3/4")
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20240405144637.17908-1-bp@kernel.org
|
|
We want to fix:
0e110732473e ("x86/retpoline: Do the necessary fixup to the Zen3/4 srso return thunk for !SRSO")
So merge in Linus's latest into x86/urgent to have it available.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-current
An unused const variable kind of error has been fixed by placing
the definition of icr_bits[] inside the ifdef block where it is
used.
|
|
The register base that was used to write to the QSERDES_DP_PHY_MODE
register was 'dp_dp_phy' before commit 815891eee668 ("phy:
qcom-qmp-combo: Introduce orientation variable"). There isn't any
explanation in the commit why this is changed, so I suspect it was an
oversight or happened while being extracted from some other series.
Oddly the value being 0x4c or 0x5c doesn't seem to matter for me, so I
suspect this is dead code, but that can be fixed in another patch. It's
not good to write to the wrong register space, and maybe some other
version of this phy relies on this.
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Abel Vesa <abel.vesa@linaro.org>
Cc: Steev Klimaszewski <steev@kali.org>
Cc: Johan Hovold <johan+linaro@kernel.org>
Cc: Bjorn Andersson <quic_bjorande@quicinc.com>
Cc: stable@vger.kernel.org # 6.5
Fixes: 815891eee668 ("phy: qcom-qmp-combo: Introduce orientation variable")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20240405000111.1450598-1-swboyd@chromium.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
