| Age | Commit message (Collapse) | Author |
|---|
|
This fixes following scenario:
$ echo 'file dynamic_debug.c line 1-123 +p' > /sys/kernel/debug/dynamic_debug/control
-bash: echo: write error: Invalid argument
$ dmesg | grep dynamic_debug
dynamic_debug:ddebug_parse_query: last-line:123 < 1st-line:1
dynamic_debug:ddebug_parse_query: query parse failed
Signed-off-by: Andrey Ryabinin <a.ryabinin@samsung.com>
Cc: Jason Baron <jbaron@akamai.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
parse_lineno() returns either negative error code or zero. We don't
need to print something here because if parse_lineno fails it will print
error message.
Signed-off-by: Andrey Ryabinin <a.ryabinin@samsung.com>
Cc: Jason Baron <jbaron@akamai.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Suppress log message like this: (open_delete,8328,0):ocfs2_unlink:951
ERROR: status = -2
Orabug:17445485
Signed-off-by: Xiaowei Hu <xiaowei.hu@oracle.com>
Cc: Joe Jin <joe.jin@oracle.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit da29bd36224b ("mm/mm_init.c: make creation of the mm_kobj happen
earlier than device_initcall") changed to pure_initcall(mm_sysfs_init).
That's too early: mm_sysfs_init() depends on core_initcall(ksysfs_init)
to have made the kernel_kobj directory "kernel" in which to create "mm".
Make it postcore_initcall(mm_sysfs_init). We could use core_initcall(),
and depend upon Makefile link order kernel/ mm/ fs/ ipc/ security/ ...
as core_initcall(debugfs_init) and core_initcall(securityfs_init) do;
but better not.
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
It is based on uninitialized value keep_early. This leads to
unpredictable result.
[akpm@linux-foundation.org: simplify code]
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Revert commit ece86e222db4, which was intended as a small performance
improvement.
Despite the claim that the patch doesn't introduce any functional
changes in fact it does.
The "no page" path behaves different now. Originally, vmalloc_to_page
might return NULL under some conditions, with new implementation it
returns pfn_to_page(0) which is not the same as NULL.
Simple test shows the difference.
test.c
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/vmalloc.h>
#include <linux/mm.h>
int __init myi(void)
{
struct page *p;
void *v;
v = vmalloc(PAGE_SIZE);
/* trigger the "no page" path in vmalloc_to_page*/
vfree(v);
p = vmalloc_to_page(v);
pr_err("expected val = NULL, returned val = %p", p);
return -EBUSY;
}
void __exit mye(void)
{
}
module_init(myi)
module_exit(mye)
Before interchange:
expected val = NULL, returned val = (null)
After interchange:
expected val = NULL, returned val = c7ebe000
Signed-off-by: Vladimir Murzin <murzin.v@gmail.com>
Cc: Jianyu Zhan <nasa4836@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
In original __alloc_memory_core_early() for bootmem wrapper, we do not
align size silently.
We should not do that, as later free with old size will leave some range
not freed.
It's obvious that code is copied from memblock_base_nid(), and that code
is wrong for the same reason.
Also remove that in memblock_alloc_base.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Dave reported big numa system booting is broken.
It turns out that commit 5b6e529521d3 ("x86: memblock: set current limit
to max low memory address") sets the limit to low wrongly.
max_low_pfn_mapped is different from max_pfn_mapped.
max_low_pfn_mapped is always under 4G.
That will memblock_alloc_nid all go under 4G.
Revert 5b6e529521d3 to fix a no-boot regression which was triggered by
457ff1de2d24 ("lib/swiotlb.c: use memblock apis for early memory
allocations").
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Reported-by: Dave Hansen <dave.hansen@intel.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The new memblock_virt APIs are used to replaced old bootmem API.
We need to allocate page below 4G for swiotlb.
That should fix regression on Andrew's system that is using swiotlb.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
At a glance these are just the inverse of each other. The one subtlety
is that arch_spin_value_unlocked() takes the lock by value, rather than
as a pointer, which is important for the lockref code.
On the other hand arch_spin_is_locked() doesn't really care, so
implement it in terms of arch_spin_value_unlocked().
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
|
|
This commit adds the architecture support required to enable the
optimised implementation of lockrefs.
That's as simple as defining arch_spin_value_unlocked() and selecting
the Kconfig option.
We also define cmpxchg64_relaxed(), because the lockref code does not
need the cmpxchg to have barrier semantics.
Using Linus' test case[1] on one system I see a 4x improvement for the
basic enablement, and a further 1.3x for cmpxchg64_relaxed(), for a
total of 5.3x vs the baseline.
On another system I see more like 2x improvement.
[1]: http://marc.info/?l=linux-fsdevel&m=137782380714721&w=4
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
|
|
The contents of this header file is not referenced in the led driver.
Remove its inclusion. While at it, re-arrange the headers as per the
category.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Bryan Wu <cooloney@gmail.com>
|
|
Use the more convenient macro.
Signed-off-by: ZHAO Gang <gamerh2o@gmail.com>
Signed-off-by: Bryan Wu <cooloney@gmail.com>
|
|
Commit c02cecb92ed4 ("ARM: orion: move platform_data definitions")
moved the files to the current location but forgot to remove the pointer
to its previous location. Clean it up. While at it also change the header
file protection macros appropriately.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Bryan Wu <cooloney@gmail.com>
|
|
This removes a warning on non-DT-enabled platforms:
drivers/leds/leds-pwm.c: In function 'led_pwm_create_of':
drivers/leds/leds-pwm.c:88:22: warning: unused variable 'node'
Really caused by the local variable that is assigned to and then never
used. Just do away with the local var, it's not needed.
Technically this code path can never be entered without DT enabled,
since there's an earlier check about number of children in the calling
function, but the compiler can't see that.
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Bryan Wu <cooloney@gmail.com>
|
|
Overflow maybe occurs when calculates the duty time. For instance,
the period time is 990000000ns, and the max_brightness is 127, when
setting the brightness to 12, the duty value will be 25906026ns, but
it should be 93543307ns.
Signed-off-by: Bryan Wu <cooloney@gmail.com>
|
|
LED registers are used only in this driver, so no additional
locking is needed. Read-Modify-Write cycle in workqueue is already
protected by regmap.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Bryan Wu <cooloney@gmail.com>
|
|
LED platform data are overwhelmed by excessive field "max_cur"
which just replicates few bits of "led_control" field.
This patch removes this field and adds a definition for the
current settings in the header.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Bryan Wu <cooloney@gmail.com>
|
|
'gpio_base'
Need check CONFIG_GPIOLIB whether defined, just like another area has
done within this file. Or can not pass compiling when CONFIG_GPIOLIB
disabled.
The related error (with allmodconfig for metag):
CC [M] drivers/leds/leds-tca6507.o
drivers/leds/leds-tca6507.c: In function 'tca6507_led_dt_init':
drivers/leds/leds-tca6507.c:731: error: 'struct tca6507_platform_data' has no member named 'gpio_base'
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Signed-off-by: Bryan Wu <cooloney@gmail.com>
|
|
There are two ways to run a pattern in LP5523.
One is using legacy sysfs files such as 'enginex_mode','enginex_load' and
'enginex_leds'. ('x' is from 1 to 3).
Among them, 'enginex_leds' are used for selecting specific LED channel MUX.
(MUX means which LEDs are used for running a pattern from LED 1 to 9.)
The other way is using the firmware interface.
In this mode, the default LED MUX strings are used.
In other words, LED MUX is not configurable on the fly.
This patch enables dynamic LED MUX configuration when the firmware is loaded.
By accessing the sysfs file 'enginex_leds', the LED channels can be configured.
To synchronize the operation mode, each engine mode should be set to 'LOAD'.
The documentation is updated as well.
Cc: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Milo Kim <milo.kim@ti.com>
Signed-off-by: Bryan Wu <cooloney@gmail.com>
|
|
Whenever the engine is loaded by the user-application, the operation mode is
reset first. But it has a problem in case of multiple engine used because
previous engine settings are cleared.
The driver should update not whole 8bits but each engine bit by masking.
On the other hands, whole engines should be reset when the driver is unloaded
and on initializing the LP5523 driver.
So, new functions are used for this handling - lp5521/5523_stop_all_engines().
Cc: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Milo Kim <milo.kim@ti.com>
Signed-off-by: Bryan Wu <cooloney@gmail.com>
|
|
In particular fix the capitalisation of GPIO and LED and
correct TCA6507_MAKE_CPIO, but also rewrite the comment about
platform-data to include reference to devicetree.
Also re-wrap comments to fit 80 columns.
Reported-by: Bryan Wu <cooloney@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Bryan Wu <cooloney@gmail.com>
|
|
The 7 lines driven by the TCA6507 can either drive LEDs or act as output-only
GPIOs.
To make this distinction in devicetree we use the "compatible" property.
If the device attached to a line is "compatible" with "gpio", we treat it
like a GPIO. If it is "compatible" with "led" (or if no "compatible" value
is set) we treat it like an LED.
(cooloney@gmail.com: fix typo in the subject)
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Bryan Wu <cooloney@gmail.com>
|
|
1/ The led_info array must be allocated to allow the full number
of LEDs even if not all are present. The array maybe be sparsely
filled but it is indexed by device address so we must at least
allocate as many slots as the highest address used. It is easiest
just to allocate all 7.
2/ range check the 'reg' value properly.
3/ led.flags must be initialised to zero, else all leds could
be treated as GPIOs (depending on what happens to be on the stack).
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Bryan Wu <cooloney@gmail.com>
|
|
Announce our (limited, see previous commit) support for CACHEPOOL
feature.
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
|
|
Follow redirect replies from osds, for details see ceph.git commit
fbbe3ad1220799b7bb00ea30fce581c5eadaf034.
v1 (current) version of redirect reply consists of oloc and oid, which
expands to pool, key, nspace, hash and oid. However, server-side code
that would populate anything other than pool doesn't exist yet, and
hence this commit adds support for pool redirects only. To make sure
that future server-side updates don't break us, we decode all fields
and, if any of key, nspace, hash or oid have a non-default value, error
out with "corrupt osd_op_reply ..." message.
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
|
|
Rename ceph_osd_request::r_{oloc,oid} to r_base_{oloc,oid} before
introducing r_target_{oloc,oid} needed for redirects.
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
|
|
Overwrite ceph_osd_request::r_oloc.pool with read_tier for read ops and
write_tier for write and read+write ops (aka basic tiering support).
{read,write}_tier are part of pg_pool_t since v9. This commit bumps
our pg_pool_t decode compat version from v7 to v9, all new fields
except for {read,write}_tier are ignored.
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
|
|
"Lookup pool info by ID" function is hidden in osdmap.c. Expose it to
the rest of libceph.
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
|
|
Update CEPH_OSD_FLAG_* enum. (We need CEPH_OSD_FLAG_IGNORE_OVERLAY to
support tiering).
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
|
|
Switch ceph_calc_ceph_pg() to new oloc and oid abstractions and rename
it to ceph_oloc_oid_to_pg() to make its purpose more clear.
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
|
|
In preparation for tiering support, which would require having two
(base and target) object names for each osd request and also copying
those names around, introduce struct ceph_object_id (oid) and a couple
helpers to facilitate those copies and encapsulate the fact that object
name is not necessarily a NUL-terminated string.
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
|
|
In preparation for adding oid abstraction, rename MAX_OBJ_NAME_SIZE to
CEPH_MAX_OID_NAME_LEN.
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
|
|
Move ceph_file_layout helper macros and inline functions to ceph_fs.h.
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
|
|
Instead of relying on pool fields in ceph_file_layout (for mapping) and
ceph_pg (for enconding), start using ceph_object_locator (oloc)
abstraction. Note that userspace oloc currently consists of pool, key,
nspace and hash fields, while this one contains only a pool. This is
OK, because at this point we only send (i.e. encode) olocs and never
have to receive (i.e. decode) them.
This makes keeping a copy of ceph_file_layout in every osd request
unnecessary, so ceph_osd_request::r_file_layout field is nuked.
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
|
|
Signed-off-by: Mike Turquette <mturquette@linaro.org>
|
|
Currently, we are allocating space for two pointers, when we actually
may need to store three of them (two divisors plus the original clock).
Fix this, and change sizeof(type) to sizeof(*var) to keep checkpatch.pl
happy.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Emilio López <emilio@elopez.com.ar>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
|
|
Allow drivers to be compiled as modules by exporting more clock
provider functions.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
|
|
arch/arm/boot/dts/include/dt-bindings/clock/qcom,mmcc-msm8974.h:60:0:
warning: "RBCPR_CLK_SRC" redefined
Rename this to MMSS_RBCPR_CLK_SRC to avoid conflicts with the
RBCPR clock in the gcc header.
Reported-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
|
|
Commit 9807362bfe1748d9bb48eecb9261f1b1aaafea1c
"clk: si5351: declare all device IDs for module loading"
removed the common i2c_device_id and introduced new ones for each variant
of the clock generator. Instead of exploiting that information in the driver,
it still depends on platform_data passing the chips .variant.
This removes the now redundant .variant from the platform_data and puts it in
i2c_device_id's .driver_data instead.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"The first two patches fix the debugfs README file to reflect better
the new features added to 3.14.
The third patch is a minor bugfix to the trace_puts() functions that
will crash the system if a developer adds one before the tracing
system is setup. It also affects trace_printk() if it has no
arguments, as the code will convert it to a trace_puts() as well.
Note, this bug will not affect unmodified kernels, as trace_printk()
and trace_puts() should only be used by developers for testing"
* tag 'trace-fixes-3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Check if tracing is enabled in trace_puts()
tracing: Fix formatting of trace README file
tracing/README: Add event file usage to tracing mini-HOWTO
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb
Pull swiotlb bug-fixes from Konrad Rzeszutek Wilk:
- Don't DoS with 'swiotlb is full' message.
- Documentation update.
* tag 'stable/for-linus-3.14-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb:
swiotlb: Don't DoS us with 'swiotlb buffer is full' (v2)
swiotlb: update format
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm
Pull pwm changes from Thierry Reding:
"The patches for this release cycle include various enhancements
(device tree support, better compile coverage, ...) for existing
drivers. There is a new driver for Atmel SoCs.
Various drivers as well as the sysfs support received minor fixes and
cleanups"
* tag 'pwm/for-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
pwm: tiecap: Remove duplicate put_sync call
pwm: tiehrpwm: use dev_err() instead of pr_err()
pwm: pxa: remove unnecessary space before tabs
pwm: ep93xx: split module author names
pwm: use seq_puts() instead of seq_printf()
pwm: atmel-pwm: Do not unprepare clock after successful registration
of: Add Atmel PWM controller device tree binding
pwm: atmel-pwm: Add Atmel PWM controller driver
backlight: pwm_bl: Remove error message upon devm_kzalloc() failure
pwm: pca9685: depends on I2C rather than REGMAP_I2C
pwm: renesas-tpu: Enable driver compilation with COMPILE_TEST
pwm: jz4740: Use devm_clk_get()
pwm: jz4740: Pass device to clk_get()
pwm: sysfs: Convert to use ATTRIBUTE_GROUPS macro
pwm: pxa: Add device tree support
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394
Pull firewire updates from Stefan Richter:
"IEEE 1394 (FireWire) subsystem changes:
- make remote debugging over 1394 a runtime option instead of a
buildtime option
- extend remote debug access past the 4 GB barrier on respectively
capable hardware
- documentation update"
* tag 'firewire-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
firewire: Enable remote DMA above 4 GB
firewire: ohci: Turn remote DMA support into a module parameter
Documentation/: update FireWire debugging documentation
|
|
Pull cris changes from Jesper Nilsson:
"Mostly removal of deprecated or old code, but also a long promised
update of the CRIS syscalls"
* tag 'cris-for-3.14' of git://jni.nu/cris:
Drop code for CRISv10 CPU simulator
Cleanup whitespace, remove old author tag
CRIS: Add missing syscalls
cris: sync_serial: remove interruptible_sleep_on
cris: remove deprecated IRQF_DISABLED
|
|
Add PVR value for MB 8.50.a.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
|
The error was introduced by the patch
"microblaze: Fix coding style issues"
(sha1: 6bd55f0bbaebb79b39e147aa864401fd0c94db82).
Error message:
arch/microblaze/kernel/setup.c: In function 'machine_early_init':
arch/microblaze/kernel/setup.c:177:3: error: 'pr_cont'
undeclared (first use in this function)
arch/microblaze/kernel/setup.c:177:3: note: each undeclared
identifier is reported only once for each function it appears in
arch/microblaze/kernel/setup.c:177:10: error: expected ';'
before string constant
arch/microblaze/kernel/setup.c:177:33: error: expected statement
before ')' token
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
|
This bug was introduced by:
"microblaze: Do not used hardcoded value in exception handler"
(sha1: 9f78d3b5ab97a22a7e836312c495804ee4bca4ab)
System without barrel shifter are pretty rare that's why
this bug has been fixed so late.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
|
Microblaze without MMU can use stack protection in bootloader
and kernel should clear this setting ASAP.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
|
More and more ARM specific drivers is using MMIO
readX/writeX_relaxed IO functions and Microblaze can
shared some drivers with ARM too.
This patch adds relaxed IO accessor macros
to prevent compilation failures.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
