summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-05-25Merge tag 'vfs/v6.4-rc3/misc.fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs Pull vfs fixes from Christian Brauner: - During the acl rework we merged this cycle the generic_listxattr() helper had to be modified in a way that in principle it would allow for POSIX ACLs to be reported. At least that was the impression we had initially. Because before the acl rework POSIX ACLs would be reported if the filesystem did have POSIX ACL xattr handlers in sb->s_xattr. That logic changed and now we can simply check whether the superblock has SB_POSIXACL set and if the inode has inode->i_{default_}acl set report the appropriate POSIX ACL name. However, we didn't realize that generic_listxattr() was only ever used by two filesystems. Both of them don't support POSIX ACLs via sb->s_xattr handlers and so never reported POSIX ACLs via generic_listxattr() even if they raised SB_POSIXACL and did contain inodes which had acls set. The example here is nfs4. As a result, generic_listxattr() suddenly started reporting POSIX ACLs when it wouldn't have before. Since SB_POSIXACL implies that the umask isn't stripped in the VFS nfs4 can't just drop SB_POSIXACL from the superblock as it would also alter umask handling for them. So just have generic_listxattr() not report POSIX ACLs as it never did anyway. It's documented as such. - Our SB_* flags currently use a signed integer and we shift the last bit causing UBSAN to complain about undefined behavior. Switch to using unsigned. While the original patch used an explicit unsigned bitshift it's now pretty common to rely on the BIT() macro in a lot of headers nowadays. So the patch has been adjusted to use that. - Add Namjae as ntfs reviewer. They're already active this cycle so let's make it explicit right now. * tag 'vfs/v6.4-rc3/misc.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: ntfs: Add myself as a reviewer fs: don't call posix_acl_listxattr in generic_listxattr fs: fix undefined behavior in bit shift for SB_NOUSER
2023-05-25Merge tag 'net-6.4-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from bluetooth and bpf. Current release - regressions: - net: fix skb leak in __skb_tstamp_tx() - eth: mtk_eth_soc: fix QoS on DSA MAC on non MTK_NETSYS_V2 SoCs Current release - new code bugs: - handshake: - fix sock->file allocation - fix handshake_dup() ref counting - bluetooth: - fix potential double free caused by hci_conn_unlink - fix UAF in hci_conn_hash_flush Previous releases - regressions: - core: fix stack overflow when LRO is disabled for virtual interfaces - tls: fix strparser rx issues - bpf: - fix many sockmap/TCP related issues - fix a memory leak in the LRU and LRU_PERCPU hash maps - init the offload table earlier - eth: mlx5e: - do as little as possible in napi poll when budget is 0 - fix using eswitch mapping in nic mode - fix deadlock in tc route query code Previous releases - always broken: - udplite: fix NULL pointer dereference in __sk_mem_raise_allocated() - raw: fix output xfrm lookup wrt protocol - smc: reset connection when trying to use SMCRv2 fails - phy: mscc: enable VSC8501/2 RGMII RX clock - eth: octeontx2-pf: fix TSOv6 offload - eth: cdc_ncm: deal with too low values of dwNtbOutMaxSize" * tag 'net-6.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (79 commits) udplite: Fix NULL pointer dereference in __sk_mem_raise_allocated(). net: phy: mscc: enable VSC8501/2 RGMII RX clock net: phy: mscc: remove unnecessary phydev locking net: phy: mscc: add support for VSC8501 net: phy: mscc: add VSC8502 to MODULE_DEVICE_TABLE net/handshake: Enable the SNI extension to work properly net/handshake: Unpin sock->file if a handshake is cancelled net/handshake: handshake_genl_notify() shouldn't ignore @flags net/handshake: Fix uninitialized local variable net/handshake: Fix handshake_dup() ref counting net/handshake: Remove unneeded check from handshake_dup() ipv6: Fix out-of-bounds access in ipv6_find_tlv() net: ethernet: mtk_eth_soc: fix QoS on DSA MAC on non MTK_NETSYS_V2 SoCs docs: netdev: document the existence of the mail bot net: fix skb leak in __skb_tstamp_tx() r8169: Use a raw_spinlock_t for the register locks. page_pool: fix inconsistency for page_pool_ring_[un]lock() bpf, sockmap: Test progs verifier error with latest clang bpf, sockmap: Test FIONREAD returns correct bytes in rx buffer with drops bpf, sockmap: Test FIONREAD returns correct bytes in rx buffer ...
2023-05-25x86/topology: Fix erroneous smp_num_siblings on Intel Hybrid platformsZhang Rui
Traditionally, all CPUs in a system have identical numbers of SMT siblings. That changes with hybrid processors where some logical CPUs have a sibling and others have none. Today, the CPU boot code sets the global variable smp_num_siblings when every CPU thread is brought up. The last thread to boot will overwrite it with the number of siblings of *that* thread. That last thread to boot will "win". If the thread is a Pcore, smp_num_siblings == 2. If it is an Ecore, smp_num_siblings == 1. smp_num_siblings describes if the *system* supports SMT. It should specify the maximum number of SMT threads among all cores. Ensure that smp_num_siblings represents the system-wide maximum number of siblings by always increasing its value. Never allow it to decrease. On MeteorLake-P platform, this fixes a problem that the Ecore CPUs are not updated in any cpu sibling map because the system is treated as an UP system when probing Ecore CPUs. Below shows part of the CPU topology information before and after the fix, for both Pcore and Ecore CPU (cpu0 is Pcore, cpu 12 is Ecore). ... -/sys/devices/system/cpu/cpu0/topology/package_cpus:000fff -/sys/devices/system/cpu/cpu0/topology/package_cpus_list:0-11 +/sys/devices/system/cpu/cpu0/topology/package_cpus:3fffff +/sys/devices/system/cpu/cpu0/topology/package_cpus_list:0-21 ... -/sys/devices/system/cpu/cpu12/topology/package_cpus:001000 -/sys/devices/system/cpu/cpu12/topology/package_cpus_list:12 +/sys/devices/system/cpu/cpu12/topology/package_cpus:3fffff +/sys/devices/system/cpu/cpu12/topology/package_cpus_list:0-21 Notice that the "before" 'package_cpus_list' has only one CPU. This means that userspace tools like lscpu will see a little laptop like an 11-socket system: -Core(s) per socket: 1 -Socket(s): 11 +Core(s) per socket: 16 +Socket(s): 1 This is also expected to make the scheduler do rather wonky things too. [ dhansen: remove CPUID detail from changelog, add end user effects ] CC: stable@kernel.org Fixes: bbb65d2d365e ("x86: use cpuid vector 0xb when available for detecting cpu topology") Fixes: 95f3d39ccf7a ("x86/cpu/topology: Provide detect_extended_topology_early()") Suggested-by: Len Brown <len.brown@intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/all/20230323015640.27906-1-rui.zhang%40intel.com
2023-05-25cpufreq: amd-pstate: Update policy->cur in amd_pstate_adjust_perf()Wyes Karny
Driver should update policy->cur after updating the frequency. Currently amd_pstate doesn't update policy->cur when `adjust_perf` is used. Which causes /proc/cpuinfo to show wrong cpu frequency. Fix this by updating policy->cur with correct frequency value in adjust_perf function callback. - Before the fix: (setting min freq to 1.5 MHz) [root@amd]# cat /proc/cpuinfo | grep "cpu MHz" | sort | uniq --count 1 cpu MHz : 1777.016 1 cpu MHz : 1797.160 1 cpu MHz : 1797.270 189 cpu MHz : 400.000 - After the fix: (setting min freq to 1.5 MHz) [root@amd]# cat /proc/cpuinfo | grep "cpu MHz" | sort | uniq --count 1 cpu MHz : 1753.353 1 cpu MHz : 1756.838 1 cpu MHz : 1776.466 1 cpu MHz : 1776.873 1 cpu MHz : 1777.308 1 cpu MHz : 1779.900 183 cpu MHz : 1805.231 1 cpu MHz : 1956.815 1 cpu MHz : 2246.203 1 cpu MHz : 2259.984 Fixes: 1d215f0319c2 ("cpufreq: amd-pstate: Add fast switch function for AMD P-State") Signed-off-by: Wyes Karny <wyes.karny@amd.com> [ rjw: Subject edits ] Cc: 5.17+ <stable@vger.kernel.org> # 5.17+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-05-25Merge tag 'for-v6.4-rc' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply Pull power supply fixes from Sebastian Reichel: - Fix power_supply_get_battery_info for devices without parent devices resulting in NULL pointer dereference - Fix desktop systems reporting to run on battery once a power-supply device with device scope appears (e.g. a HID keyboard with a battery) - Ratelimit debug print about driver not providing data - Fix race condition related to external_power_changed in multiple drivers (ab8500, axp288, bq25890, sc27xx, bq27xxx) - Fix LED trigger switching from blinking to solid-on when charging finishes - Fix multiple races in bq27xxx battery driver - mt6360: handle potential ENOMEM from devm_work_autocancel - sbs-charger: Fix SBS_CHARGER_STATUS_CHARGE_INHIBITED bit - rt9467: avoid passing 0 to dev_err_probe * tag 'for-v6.4-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (21 commits) power: supply: Fix logic checking if system is running from battery power: supply: mt6360: add a check of devm_work_autocancel in mt6360_charger_probe power: supply: sbs-charger: Fix INHIBITED bit for Status reg power: supply: rt9467: Fix passing zero to 'dev_err_probe' power: supply: Ratelimit no data debug output power: supply: Fix power_supply_get_battery_info() if parent is NULL power: supply: bq24190: Call power_supply_changed() after updating input current power: supply: bq25890: Call power_supply_changed() after updating input current or voltage power: supply: bq27xxx: Use mod_delayed_work() instead of cancel() + schedule() power: supply: bq27xxx: After charger plug in/out wait 0.5s for things to stabilize power: supply: bq27xxx: Ensure power_supply_changed() is called on current sign changes power: supply: bq27xxx: Move bq27xxx_battery_update() down power: supply: bq27xxx: Add cache parameter to bq27xxx_battery_current_and_status() power: supply: bq27xxx: Fix poll_interval handling and races on remove power: supply: bq27xxx: Fix I2C IRQ race on remove power: supply: bq27xxx: Fix bq27xxx_battery_update() race condition power: supply: leds: Fix blink to LED on transition power: supply: sc27xx: Fix external_power_changed race power: supply: bq25890: Fix external_power_changed race power: supply: axp288_fuel_gauge: Fix external_power_changed race ...
2023-05-25Merge tag 'sound-6.4-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "A collection of small fixes: - HD-audio runtime PM bug fix - A couple of HD-audio quirks - Fix series of ASoC Intel AVS drivers - ASoC DPCM fix for a bug found on new Intel systems - A few other ASoC device-specific small fixes" * tag 'sound-6.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda/realtek: Enable headset onLenovo M70/M90 ASoC: dwc: move DMA init to snd_soc_dai_driver probe() ASoC: cs35l41: Fix default regmap values for some registers ALSA: hda: Fix unhandled register update during auto-suspend period ASoC: dt-bindings: tlv320aic32x4: Fix supply names ASoC: Intel: avs: Add missing checks on FE startup ASoC: Intel: avs: Fix avs_path_module::instance_id size ASoC: Intel: avs: Account for UID of ACPI device ASoC: Intel: avs: Fix declaration of enum avs_channel_config ASoC: Intel: Skylake: Fix declaration of enum skl_ch_cfg ASoC: Intel: avs: Access path components under lock ASoC: Intel: avs: Fix module lookup ALSA: hda/ca0132: add quirk for EVGA X299 DARK ASoC: soc-pcm: test if a BE can be prepared ASoC: rt5682: Disable jack detection interrupt during suspend ASoC: lpass: Fix for KASAN use_after_free out of bounds
2023-05-25Merge tag 'platform-drivers-x86-v6.4-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver fixes from Hans de Goede: "Nothing special to report just a few small fixes" * tag 'platform-drivers-x86-v6.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: platform/x86/intel/ifs: Annotate work queue on stack so object debug does not complain platform/x86: ISST: Remove 8 socket limit platform/mellanox: mlxbf-pmc: fix sscanf() error checking platform/x86/amd/pmf: Fix CnQF and auto-mode after resume platform/x86: asus-wmi: Ignore WMI events with codes 0x7B, 0xC0
2023-05-25Merge tag 'm68k-for-v6.4-tag2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k Pull m68k fix from Geert Uytterhoeven: - Fix signal frame issue causing user-space crashes on 68020/68030 * tag 'm68k-for-v6.4-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k: Move signal frame following exception on 68020/030
2023-05-25io_uring: unlock sqd->lock before sq thread release CPUWenwen Chen
The sq thread actively releases CPU resources by calling the cond_resched() and schedule() interfaces when it is idle. Therefore, more resources are available for other threads to run. There exists a problem in sq thread: it does not unlock sqd->lock before releasing CPU resources every time. This makes other threads pending on sqd->lock for a long time. For example, the following interfaces all require sqd->lock: io_sq_offload_create(), io_register_iowq_max_workers() and io_ring_exit_work(). Before the sq thread releases CPU resources, unlocking sqd->lock will provide the user a better experience because it can respond quickly to user requests. Signed-off-by: Kanchan Joshi<joshi.k@samsung.com> Signed-off-by: Wenwen Chen<wenwen.chen@samsung.com> Link: https://lore.kernel.org/r/20230525082626.577862-1-wenwen.chen@samsung.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-05-25MAINTAINERS: update arm64 Microchip entriesConor Dooley
Krzysztof noticed that patches for arch/arm64/boot/dts/microchip were getting lost & the listed tree was inactive. Nicolas and I are willing to shepherd patches to Arnd, using the existing at91 tree, so add a new entry covering arch/arm64/boot/dts/microchip, listing us as maintainers. Drop the tree from the existing sparx5 entry & narrow the devicetree pattern to just sparx devices, leaving Lars, Steen and Daniel looking after support for their SoCs. CC: Rob Herring <robh+dt@kernel.org> CC: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org> CC: Conor Dooley <conor@kernel.org> CC: Nicolas Ferre <nicolas.ferre@microchip.com> CC: Claudiu Beznea <claudiu.beznea@microchip.com> CC: soc@kernel.org CC: Lars Povlsen <lars.povlsen@microchip.com> CC: Steen Hegelund <Steen.Hegelund@microchip.com> CC: Daniel Machon <daniel.machon@microchip.com> Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Acked-by: Steen Hegelund <Steen.Hegelund@microchip.com> Acked-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20230522-wagon-stencil-a164ec39322a@wendy Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-05-25Merge tag 'imx-fixes-6.4' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 6.4: - A couple of i.MX8MN/P video clock changes from Adam Ford to fix issue with clock re-parenting. - Add missing pvcie-supply regulator for imx6qdl-mba6 board. - A series of colibri-imx8x board fixes on pin configuration. - Set and limit the mode for PMIC bucks for imx6ull-dhcor board to fix stability problems. - A couple of changes from Frank Li to correct cdns,usb3 bindings cdns,on-chip-buff-size property and fix USB 3.0 gadget failure on i.MX8QM & QXPB0. - Add a required PHY deassert delay for imx8mn-var-som board to fix PHY detection failure. * tag 'imx-fixes-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: arm64: dts: imx8: fix USB 3.0 Gadget Failure in QM & QXPB0 at super speed dt-binding: cdns,usb3: Fix cdns,on-chip-buff-size type arm64: dts: colibri-imx8x: delete adc1 and dsp arm64: dts: colibri-imx8x: fix iris pinctrl configuration arm64: dts: colibri-imx8x: move pinctrl property from SoM to eval board arm64: dts: colibri-imx8x: fix eval board pin configuration arm64: dts: imx8mp: Fix video clock parents ARM: dts: imx6qdl-mba6: Add missing pvcie-supply regulator ARM: dts: imx6ull-dhcor: Set and limit the mode for PMIC buck 1, 2 and 3 arm64: dts: imx8mn-var-som: fix PHY detection bug by adding deassert delay arm64: dts: imx8mn: Fix video clock parents Link: https://lore.kernel.org/r/20230516133625.GI767028@dragon Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-05-25Merge tag 'scmi-fix-6.4' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes Arm SCMI fix for v6.4 Single fix for incorrect invocation of alloc_workqueue() where WQ_SYSFS flag is passed as @max_active parameter instead of OR'ing with the other flags in the @flags parameter. * tag 'scmi-fix-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: firmware: arm_scmi: Fix incorrect alloc_workqueue() invocation Link: https://lore.kernel.org/r/20230509143529.1188812-1-sudeep.holla@arm.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-05-25Merge tag 'juno-fixes-6.4' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes Arm FVP/Vexpress fixes for v6.4 Couple of fixes to address the missing required 'cache-unified' property in the level 2 and 3 caches on some of the FVP/vexpress platforms. * tag 'juno-fixes-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: arm64: dts: arm: add missing cache properties ARM: dts: vexpress: add missing cache properties Link: https://lore.kernel.org/r/20230509143508.1188786-1-sudeep.holla@arm.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-05-25Merge tag 'optee-async-notif-fix-for-v6.3' of ↵Arnd Bergmann
https://git.linaro.org/people/jens.wiklander/linux-tee into arm/fixes Fixes an uninitialized variable in OP-TEE driver * tag 'optee-async-notif-fix-for-v6.3' of https://git.linaro.org/people/jens.wiklander/linux-tee: optee: fix uninited async notif value Link: https://lore.kernel.org/r/20230421075443.GA3136581@rayden Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-05-25media: sti: c8sectpfe: drop of_match_ptr() to avoid unused variablesAlain Volmat
When CONFIG_OF is not set, "of_match_ptr(<match_table>)" compiles to NULL, which leaves <match_table> unused, leading to warning such as: drivers/media/platform/st/sti/c8sectpfe/c8sectpfe-core.c:1175:34: warning: unused variable 'c8sectpfe_match' [-Wunused-const-variable] Drop the of_match_ptr usage to avoid such warning. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Alain Volmat <avolmat@me.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-05-25media: c8sectpfe: switch to using gpiod APIDmitry Torokhov
This switches the driver from using legacy gpio API and to the newer gpiod API. Since ordinary gpiod APIs operate on logical and not electrical levels, handling of the reset GPIO is adjusted accordingly. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-05-25media: rcar-vin: Add support for R-Car V4HNiklas Söderlund
Add support for R-Car V4H. The V4H uses the ISP Channel Selector as its only possible video input source. Even tho V4H is a Gen3 board the VIN interface is very close to the one found on the V3U, for this reason mark it as a Gen3 model internally. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-05-25media: rcar-isp: Add support for R-Car V4HNiklas Söderlund
Add support for R-Car V4H. The ISP Channel Selector is used to route channels to the different VIN modules. The ISP CS found in the V4H is very similar to the one found on the V3U. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-05-25media: staging: max96712: Add support for 3-lane C-PHYNiklas Söderlund
Add basic support for outputting the test patterns on a 3-lane CSI-2 C-PHY bus. As the driver only can output frames form its internal test pattern generator, enabling C-PHY output is as simple as setting the output mode to C-PHY instead of D-PHY. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> [Sakari Ailus: Wrap long lines.] Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-05-25media: imx: imx7-media-csi: Init default format with __imx7_csi_video_try_fmt()Laurent Pinchart
Use the __imx7_csi_video_try_fmt() helper function to initialize the default format at probe time. This improves consistency by using the same code path for both default initialization and validation at runtime, and allows dropping the now unused imx7_csi_find_pixel_format() function. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-05-25media: imx: imx7-media-csi: Relax width constraints for non-8bpp formatsAlexander Stein
The driver unconditionally aligns the image width to multiples of 8 pixels. The real alignment constraint is 8 bytes, as indicated by the CSI_IMAG_PARA.IMAGE_WIDTH documentation that calls for 8 pixel alignment for 8bpp formats and 4 pixel alignment for other formats. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-05-25media: imx: imx7-media-csi: Remove incorrect interlacing supportAlexander Stein
The driver doesn't currently support interlacing, but due to legacy leftovers, it accepts values for the pixel format "field" field other than V4L2_FIELD_NONE. Fix it by hardcoding V4L2_FIELD_NONE. Proper interlacing support can be implemented later if desired. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-05-25media: imx: imx7-media-csi: Get rid of superfluous call to ↵Alexander Stein
imx7_csi_mbus_fmt_to_pix_fmt There is no need to convert input pixformat to mbus_framefmt and back again. Instead apply pixformat width constrains directly. Assign compose values before adjusting pixformat height/width. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-05-25media: hi846: fix usage of pm_runtime_get_if_in_use()Martin Kepplinger
pm_runtime_get_if_in_use() does not only return nonzero values when the device is in use, it can return a negative errno too. And especially during resuming from system suspend, when runtime pm is not yet up again, -EAGAIN is being returned, so the subsequent pm_runtime_put() call results in a refcount underflow. Fix system-resume by handling -EAGAIN of pm_runtime_get_if_in_use(). Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm> Fixes: e8c0882685f9 ("media: i2c: add driver for the SK Hynix Hi-846 8M pixel camera") Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-05-25media: rcar-csi2: Prepare for C-PHY supportNiklas Söderlund
Gen4 will support both D-PHY and C-PHY, while Gen3 only supports D-PHY. Add two flags to the device information structure to be able to record what each SoC supports. Extend the device node parsing to accept both CSI_2 D-PHY and C-PHY buses, while at the same time taking the SoC support into account. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> [Sakari Ailus: Line wrap.] Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-05-25media: rcar-csi2: Prepare for Gen4 supportNiklas Söderlund
Prepare the driver for supporting R-Car Gen4. The starting of the receiver and how to enter standby differs between Gen3 and Gen4, create function pointers in the device info structure to control the different behavior. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-05-25media: i2c: add ov01a10 image sensor driverBingbu Cao
Add v4l2 device driver for OmniVision ov01a10 image sensor, ov01a10 image sensor can deliver 1280x800 resolution BGGR10 images at 60 fps. Signed-off-by: Yating Wang <yating.wang@intel.com> Signed-off-by: Bingbu Cao <bingbu.cao@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-05-25media: renesas: fdp1: Identify R-Car Gen2 versionsGeert Uytterhoeven
On R-Car M2-W: rcar_fdp1 fe940000.fdp1: FDP1 Unidentifiable (0x02010101) rcar_fdp1 fe944000.fdp1: FDP1 Unidentifiable (0x02010101) Although the IP Internal Data Register on R-Car Gen2 is documented to contain all zeros, the actual register contents seem to match the FDP1 version ID of R-Car H3 ES1.*, which has just been removed. Fortunately this version is not used for any other purposes yet. Fix this by re-adding the ID, now using an R-Car Gen2-specific name. Fixes: af4273b43f2b ("media: renesas: fdp1: remove R-Car H3 ES1.* handling") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-05-25media: st-mipid02: Propagate format from sink to source padDaniel Scally
When setting formats on the sink pad, propagate the adjusted format over to the subdev's source pad. Use the MIPID02_SOURCE macro to fetch the pad's try format rather than relying on the pad field of the format to facilitate this - the function is specific to the source pad anyway. Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com> [Sakari Ailus: Line wrap, fix subject] Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-05-25media: i2c: Correct format propagation for st-mipid02Daniel Scally
Format propagation in the st-mipid02 driver is incorrect in that when setting format for V4L2_SUBDEV_FORMAT_TRY on the source pad, the _active_ rather than _try_ format from the sink pad is propagated. This causes problems with format negotiation - update the function to propagate the correct format. Fixes: 642bb5e88fed ("media: st-mipid02: MIPID02 CSI-2 to PARALLEL bridge driver") Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-05-25media: video-mux: Add missing media_entity_cleanup upon async register failAlexander Stein
Although media_entity_pads_init has been called, a call to media_entity_cleanup in the cleanup code was missing. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-05-25media: i2c: video: constify pointers to hwmon_channel_infoKrzysztof Kozlowski
Statically allocated array of pointers to hwmon_channel_info can be made const for safety. Reviewed-by: Matt Ranostay <matt.ranostay@konsulko.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-05-25media: ov5640: Drop dead code using frame_intervalJacopo Mondi
The ov5640_update_pixel_rate() function handles the parallel and MIPI CSI-2 cases separately. When running on a parallel setup the V4L2_CID_PIXEL_RATE value is calculated at the beginning of the function using the values configured with the frame_interval operations, and then the function immediately returns. The remaining of the function handles the MIPI CSI-2 configuration and should not use the 'current_fr' and 'def_fps' fields as those are only relevant for parallel mode. Drop a small section of dead code that updates vblank using frame_interval on a MIPI CSI-2 setup. Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-05-25media: ov5640: Remove unused 'framerate' parameterJacopo Mondi
The 'current framerate' parameter passed to ov5640_try_fmt_internal() is unsued. Drop it. Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-05-25media: ov5640: correct comments for default VGA to avoid confusionGuoniu.zhou
When OV5640 work at DVP mode, the default initialization settings make it output 30 frames per second. But when it work at CSI-2 mode the default link frequency will make it output 60 frames per second, so correct the comments to make it more clear. Signed-off-by: Guoniu.zhou <guoniu.zhou@nxp.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-05-25dt-bindings: i2c: maxim,max96712: Require setting bus-type propertyNiklas Söderlund
The MAX96712 can support both a CSI-2 C-PHY and D-PHY bus. The initial staging driver however only supported D-PHY and the bus-type property was left optional. In preparation for adding C-PHY support to the staging driver make the bus-type property mandatory as it is needed to select the correct PHY mode. Without the bus-type property present, the driver falls-back to D-PHY mode, so the change is functionally backward compatible with old DTS files lacking the property. The only in-tree DTS file (renesas/r8a779a0-falcon-csi-dsi.dtsi) that lacked the property uses D-PHY and have been updated. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-05-25media: i2c: imx334: update pixel, hblank and link frequencyShravan Chippa
Update pixel_rate and link frequency for 1920x1080@30 while changing mode. Update vblank value while changing mode Add support to handle multiple link frequencies. Add dummy ctrl cases for pixel_rate and link frequency to avoid error while changing the modes dynamically. Update default link frequency from device tree max link frequency value. Update init_cfg() function to update the link frequency menu_skip_mask value. Suggested-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: Shravan Chippa <shravan.chippa@microchip.com> [Sakari Ailus: Document menu_skip_mask, remove extra blank line.] Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-05-25media: ipu3-cio2: Fix container_of() macro wrapper argumentsSakari Ailus
The argument of the to_sensor_asd() is called the same as the field name for the container_of() macro, so it only works if the argument name is "asd". Fix it. Also switch to container_of_const(). Reviewed-by: Bingbu Cao <bingbu.cao@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-05-25media: uapi: Fix [GS]_ROUTING ACTIVE flag valueSakari Ailus
The value of the V4L2_SUBDEV_ROUTE_FL_ACTIVE is 1, not 0. Use hexadecimal numbers as is done elsewhere in the documentation. Cc: stable@vger.kernel.org # for >= v6.3 Fixes: ea73eda50813 ("media: Documentation: Add GS_ROUTING documentation") Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-05-25media: dt-bindings: qcom: camss: correct unit addressKrzysztof Kozlowski
Match unit-address to first reg entry. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-05-25media: ov5693: Simplify an error messageChristophe JAILLET
dev_err_probe() already display the error code. There is no need to duplicate it explicitly in the error message. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-05-25media: uapi: Use unsigned int values for assigning bits in u32 fieldsSakari Ailus
Use unsigned int values annoted by "U" for u32 fields. While this is a good practice, there doesn't appear to be a bug that this patch would fix. The patch has been generated using the following command: perl -i -pe 's/\([0-9]+\K <</U <</g; s/\|\s*0\K\)/U\)/' \ include/uapi/linux/media.h Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-05-25media: Documentation: Rename meta format filesSakari Ailus
Rename meta format files, using "metafmt" prefix instead of "pixfmt-meta". These are metadata formats, not pixel formats. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Cc: Bingbu Cao <bingbu.cao@intel.com> Cc: Dafna Hirschfeld <dafna@fastmail.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-05-25media: mc: Make media_get_pad_index() use pad type flagSakari Ailus
Use the pad flag specifying the pad type instead of a boolean in preparation for internal source pads. Also make the loop variable unsigned. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-05-25media: pci: ipu3-cio2: Obtain remote pad from endpointSakari Ailus
Use the endpoint fwnode to find out the remote pad, instead of using the first source pad found. Also improve error messages. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Bingbu Cao <bingbu.cao@intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-05-25media: mc: Make media_entity_get_fwnode_pad() fwnode argument constSakari Ailus
fwnode_graph_parse_endpoint() fwnode argument is now const, therefore make media_entity_get_fwnode_pad() fwnode argument const as well. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-05-25Documentation: v4l: Document rotation and orientation for sensor driversSakari Ailus
Document how rotation and orientation should be taken into account in writing camera sensor drivers. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-05-25media: admin-guide: Update rkisp1.rstJack Zhu
Update Rockchip ISP1 driver file path Signed-off-by: Jack Zhu <jack.zhu@starfivetech.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-05-25media: i2c: imx296: fix error checking in imx296_read_temperature()Dan Carpenter
The "& IMX296_TMDOUT_MASK" means that "tmdout" can't be negative so the error checking will not work. Fixes: cb33db2b6ccf ("media: i2c: IMX296 camera sensor driver") Signed-off-by: Dan Carpenter <error27@gmail.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-05-25media: mediatek: vcodec: support stateless hevc decoderYunfei Dong
Add mediatek hevc decoder linux driver which use the stateless API in MT8195. Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Tested-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Tested-by: Nathan Hebert <nhebert@chromium.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> [hverkuil: add () around 'flag' in macro]
generated by cgit (git 2.34.1) at 2025-09-13 22:24:38 +0000