summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-11-09ath5k: Optimize descriptor alignmentBruno Randolf
Similar to Felix Fietkau <nbd@openwrt.org> "ath9k_hw: optimize all descriptor access functions" (13db2a80244908833502189a24de82a856668b8a). Signed-off-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-09ath9k: Remove the median function in rate controlMohammed Shafi Shajakhan
With the current rate control selection method the median function is nowhere used, so remove it. Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-09ath9k_hw: optimize all descriptor access functionsFelix Fietkau
Because all of the descriptor data structures are marked as __packed, GCC assumes the worst case wrt. alignment and generates unaligned load/store instructions on MIPS for access to all fields. Since descriptors always have to be 4-byte-aligned, we can just mark the data structures with __aligned(4), which allows GCC to generate much more efficient code. Verified through disassembly and OProfile comparisons. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-09ath9k: Convert to new PCI PM frameworkRafael J. Wysocki
The ath9k driver uses the legacy PCI power management (suspend and resume) callbacks that apparently cause intermittent problems to happen (the adapter sometimes doesn't resume correctly on my Acer Ferrari One). Make it use the new PCI PM and let the PCI core code handle the PCI-specific details of power transitions. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-09ath9k: fix sparse complaint on aphy for debugfsLuis R. Rodriguez
This fixes this sparse complaint: CHECK drivers/net/wireless/ath/ath9k/debug.c drivers/net/wireless/ath/ath9k/debug.c:548:34: warning: symbol 'aphy' shadows an earlier one drivers/net/wireless/ath/ath9k/debug.c:491:26: originally declared here Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-09ath9k_hw: make ath9k_hw_gettsf32 staticFelix Fietkau
It is now only used in hw.c Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-09ath9k: remove a redundant call to ath9k_hw_gettsf32Felix Fietkau
When the timer_next argument to ath9k_gen_timer_start is behind the tsf value, tsf + timer_period is used, which is what ath_btcoex_period_timer was setting it to. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-09ath9k: optimize/fix ANI RSSI processingFelix Fietkau
ANI needs the RSSI average only in station mode, and only for tracking the signal strength of beacons of the AP that it is connected to. Adjust the code to track on the beacon RSSI, and store the average of that in the ath_wiphy struct. With these changes, we can get rid of this extra station lookup in the rx path, which saves precious CPU cycles. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-09ath9k_hw: optimize tx status descriptor processingFelix Fietkau
Disassembly shows, that at least on MIPS, the compiler generates a lot of memory accesses to the same location in the descriptor field parsing. Since it is operating on uncached memory, this can be quite expensive in this hot path. Change the code a bit to help the compiler optimize it properly, and get rid of some unused fields in the ath_tx_status struct. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-09ath9k_hw: small optimization in ar9002_hw_get_isrFelix Fietkau
ah->config.rx_intr_mitigation does not need to be checked before checking the rx interrupt mask for AR_ISR_RXMINTR or AR_ISR_RXINTM, as those interrupts will be masked out if rx interrupt mitigation is disabled. Avoid reading AR_ISR_S5_S twice by reordering the code to be more concise. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-09ath9k_hw: optimize interrupt mask changesFelix Fietkau
OProfile showed that ath9k was spending way too much time in ath9k_hw_set_interrupts. Since most of the interrupt mask changes only need to globally enable/disable interrupts, it makes sense to split this part into separate functions, replacing all calls to ath9k_hw_set_interrupts(ah, 0) with ath9k_hw_disable_interrupts(ah). ath9k_hw_set_interrupts(ah, ah->imask) only gets changed to ath9k_hw_enable_interrupts(ah), whenever ah->imask was not changed since the point where interrupts were disabled. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-09b43: N-PHY: define registers names for 2056 radioRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Cc: Henry Ptasinski <henryp@broadcom.com> Cc: Brett Rudley <brudley@broadcom.com> Cc: Nohee Ko <noheek@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-09b43: N-PHY: define registers names for 2056 radioRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Cc: Henry Ptasinski <henryp@broadcom.com> Cc: Brett Rudley <brudley@broadcom.com> Cc: Nohee Ko <noheek@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-09b43: N-PHY: define channel table struct for rev3+ devicesRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-09iwlwifi: dont use pci_dev before it being assignWey-Yi Guy
In order to use build-in debugging macro, pci_dev in priv need to be assigned first. This fix iwl3945 driver oopsed at boot with 2.6.37-rc1 Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-09Bluetooth: Add MacBookAir3,1(2) supportEdgar (gimli) Hucek
Adding the new MacBookAir3,1(2) to btusb. Output without the patch and btusb loaded : T: Bus=03 Lev=02 Prnt=03 Port=02 Cnt=01 Dev#= 6 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=05ac ProdID=821b Rev= 0.34 S: Manufacturer=Apple Inc. S: Product=Bluetooth USB Host Controller C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr= 0mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 32 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 32 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 64 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 64 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 64 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 64 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=84(I) Atr=02(Bulk) MxPS= 32 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 32 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none) Output with the patch and btusb loaded : T: Bus=03 Lev=02 Prnt=03 Port=02 Cnt=01 Dev#= 6 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=05ac ProdID=821b Rev= 0.34 S: Manufacturer=Apple Inc. S: Product=Bluetooth USB Host Controller C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr= 0mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 32 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 32 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 64 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 64 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 64 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 64 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=84(I) Atr=02(Bulk) MxPS= 32 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 32 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none) Signed-off-by: Edgar (gimli) Hucek <gimli@dark-green.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2010-11-09Bluetooth: fix not setting security level when creating a rfcomm sessionLuiz Augusto von Dentz
This cause 'No Bonding' to be used if userspace has not yet been paired with remote device since the l2cap socket used to create the rfcomm session does not have any security level set. Signed-off-by: Luiz Augusto von Dentz <luiz.dentz-von@nokia.com> Acked-by: Ville Tervo <ville.tervo@nokia.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2010-11-09Bluetooth: fix endianness conversion in L2CAPGustavo F. Padovan
Last commit added a wrong endianness conversion. Fixing that. Reported-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2010-11-09Bluetooth: fix unaligned access to l2cap conf datasteven miao
In function l2cap_get_conf_opt() and l2cap_add_conf_opt() the address of opt->val sometimes is not at the edge of 2-bytes/4-bytes, so 2-bytes/4 bytes access will cause data misalignment exeception. Use get_unaligned_le16/32 and put_unaligned_le16/32 function to avoid data misalignment execption. Signed-off-by: steven miao <realmz6@gmail.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2010-11-09Bluetooth: Enable USB autosuspend by default on btusbMatthew Garrett
We've done this for a while in Fedora without any obvious problems other than some interaction with input devices. Those should be fixed now, so let's try this in mainline. Signed-off-by: Matthew Garrett <mjg@redhat.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2010-11-09Bluetooth: Fix non-SSP auth request for HIGH security level socketsJohan Hedberg
When initiating dedicated bonding a L2CAP raw socket with HIGH security level is used. The kernel is supposed to trigger the authentication request in this case but this doesn't happen currently for non-SSP (pre-2.1) devices. The reason is that the authentication request happens in the remote extended features callback which never gets called for non-SSP devices. This patch fixes the issue by requesting also authentiation in the (normal) remote features callback in the case of non-SSP devices. This rule is applied only for HIGH security level which might at first seem unintuitive since on the server socket side MEDIUM is already enough for authentication. However, for the clients we really want to prefer the server side to decide the authentication requrement in most cases, and since most client sockets use MEDIUM it's better to be avoided on the kernel side for these sockets. The important socket to request it for is the dedicated bonding one and that socket uses HIGH security level. The patch is based on the initial investigation and patch proposal from Andrei Emeltchenko <endrei.emeltchenko@nokia.com>. Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2010-11-09Bluetooth: fix hidp kconfig dependency warningRandy Dunlap
Fix kconfig dependency warning to satisfy dependencies: warning: (BT_HIDP && NET && BT && BT_L2CAP && INPUT || USB_HID && HID_SUPPORT && USB && INPUT) selects HID which has unmet direct dependencies (HID_SUPPORT && INPUT) Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2010-11-08ath9k_hw: Fix memory leak on ath9k_hw_rf_alloc_ext_banks failureRajkumar Manoharan
The allocated externel radio banks have to be freed in case of ath9k_hw_rf_alloc_ext_banks failure. Cc: stable@kernel.org Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-08ath9k_htc: Fix probe failure if CONFIG_USB_DEBUG enabledRajkumar Manoharan
Since the endpoint descriptors (EP3 & EP4) were changed from Interrupt to Bulk type by firmware, the urb submission done on Bulk pipes. And the recent commit "check the endpoint type against the pipe type" added aditional error checking against pipe types under CONFIG_USB_DEBUG. So bmAttribute has to be updated for both EP3 & EP4 before submitting urbs on that pipe. This patch resolves the following failure. [ 2215.710936] usb 1-1: usb_probe_device [ 2215.710945] usb 1-1: configuration #1 chosen from 1 choice [ 2215.711152] usb 1-1: adding 1-1:1.0 (config #1, interface 0) [ 2215.711252] ath9k_hif_usb 1-1:1.0: usb_probe_interface [ 2215.711255] ath9k_hif_usb 1-1:1.0: usb_probe_interface - got id [ 2215.712780] usb 1-1: BOGUS urb xfer, pipe 3 != type 1 [ 2215.713782] usb 1-1: ath9k_htc: Unable to allocate URBs [ 2215.713801] ath9k_hif_usb: probe of 1-1:1.0 failed with error -22 Reported-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-08ath9k_htc: Add support for device ID 3346Haitao Zhang
This patch adds support for USB dongle with device ID 3346 from IMC Networks. Signed-off-by: Haitao Zhang <minipanda@linuxrobot.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-08ath9k_hw: Fix AR9280 surprise removal during frequent idle on/offVasanthakumar Thiagarajan
Bit 22 of AR_WA should be set to fix the situation where chip reset is asynchronous to clock of analog shift registers, such that when reset is released, it could mess up the values of analog shift registers and cause some hw issue on AR9280. This bit is write only, but the driver does a read-modify-write on AR_WA without setting bit 22 in ar9002_hw_configpcipowersave() during radio disable. This causes surprise removal of hw. It can never recover from this state and the hw will become usable only after a power on/off cycle, and sometimes only during a cold reboot. This issue can be triggered by doing frequent roaming with the simple/test-roam script available from the wifi-test project [1] when roaming between APs quickly. When roaming there is a is a high possibility that the device being put into idle (radio disable) state by mac80211 during AUTH->ASSOC. A device hardware reset would fail and the kernel would output: [40251.363799] ath: AWAKE -> FULL-SLEEP [40251.363815] ieee80211 phy17: device no longer idle - working [40251.363817] ath: Marking phy17 as not-idle [40251.363819] ath: FULL-SLEEP -> AWAKE [40251.415978] pciehp 0000:00:1c.3:pcie04: Card not present on Slot(3) [40251.419896] ath: ah->misc_mode 0x4 [40251.428138] pciehp 0000:00:1c.3:pcie04: Card present on Slot(3) [40251.532247] ath: timeout (100000 us) on reg 0x9860: 0xffffffff & 0x00000001 != 0x00000000 [40251.532250] ath: Unable to reset channel (2462 MHz), reset status -5 [40251.532422] ath: Set channel: 5745 MHz [40251.540639] ath: Failed to stop TX DMA in 100 msec after killing last frame [40251.548826] ath: Failed to stop TX DMA in 100 msec after killing last frame [40251.557023] ath: Failed to stop TX DMA in 100 msec after killing last frame [40251.565211] ath: Failed to stop TX DMA in 100 msec after killing last frame [40251.573415] ath: Failed to stop TX DMA in 100 msec after killing last frame [40251.581603] ath: Failed to stop TX DMA in 100 msec after killing last frame [40251.581606] ath: Failed to stop TX DMA. Resetting hardware! [40251.592679] ath: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff [40251.703330] ath: timeout (100000 us) on reg 0x7000: 0xffffffff & 0x00000003 != 0x00000000 [40251.703333] ath: RTC stuck in MAC reset [40251.703334] ath: Chip reset failed [40251.703335] ath: Unable to reset hardware; reset status -22 This is currently only reproducible with some HB92 (Half Mini-PCIE) cards but the fix applies to all AR9280 cards. This patch fixes this issue by setting bit 22 during radio disable. This patch has fixes for all kernels that has ath9k. [1] http://wireless.kernel.org/en/developers/Testing/wifi-test Cc: kyungwan.nam@atheros.com Cc: amod.bodas@atheros.com Cc: david.quan@atheros.com Cc: stable@kernel.org Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-08libertas: terminate scan when stopping interfaceDaniel Drake
There are currently no provisions in place to ensure that the scanning task has been stopped when the interface is stopped or removed. This can result in a WARNING at net/wireless/core.c:643 and other badness when you remove the module while a scan is happening. Terminate the scanning task during interface stop. Signed-off-by: Daniel Drake <dsd@laptop.org> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-08mac80211: unset SDATA_STATE_OFFCHANNEL when cancelling a scanBrian Cavagnolo
For client STA interfaces, ieee80211_do_stop unsets the relevant interface's SDATA_STATE_RUNNING state bit prior to cancelling an interrupted scan. When ieee80211_offchannel_return is invoked as part of cancelling the scan, it doesn't bother unsetting the SDATA_STATE_OFFCHANNEL bit because it sees that the interface is down. Normally this doesn't matter because when the client STA interface is brought back up, it will probably issue a scan. But in some cases (e.g., the user changes the interface type while it is down), the SDATA_STATE_OFFCHANNEL bit will remain set. This prevents the interface queues from being started. So we cancel the scan before unsetting the SDATA_STATE_RUNNING bit. Signed-off-by: Brian Cavagnolo <brian@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-08ath9k: check old power mode before clearing cycle countersFelix Fietkau
ath9k_ps_wakeup() clears the cycle counters after waking up the hardware using ath9k_hw_setpower, however if power save is disabled, then the counters will contain useful data, which then gets discarded. Fix this by checking the old power mode before discarding any data. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-08cfg80211: fix a crash in dev lookup on dump commandsFelix Fietkau
IS_ERR and PTR_ERR were called with the wrong pointer, leading to a crash when cfg80211_get_dev_from_ifindex fails. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-08carl9170: usbid table updatesChristian Lamparter
This patch includes the following updates: * add D-Link DWA-130 Rev D * Netgear has three WNDA3100 versions. the original WNDA3100 is now called WNDA3100v1. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-08ath9k: Fix a DMA latency issue for Intel Pinetrail platforms.Vivek Natarajan
Throughput was severely affected in Intel Pinetrail platforms because of a DMA problem in C3 state. This patch fixes this issue. Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> CC: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-08ath9k: Avoid HW opmode overridden on monitor mode changesRajkumar Manoharan
The HW opmode is blindly set to monitor type on monitor mode change notification. This overrides the opmode when one of the interfaces is still running as non-monitor iftype. So the monitoring information needs to be maintained seperately. Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-08libipw: fix proc entry removalLinus Torvalds
This bug seems to be due to commit 27ae60f8f7aac ("ipw2x00: replace "ieee80211" with "libipw" where appropriate"), where Pavel did this: - libipw_proc = proc_mkdir(DRV_NAME, init_net.proc_net); + libipw_proc = proc_mkdir("ieee80211", init_net.proc_net); but then the cleanup was kept as remove_proc_entry(DRV_NAME, init_net.proc_net); in both places (both in the failure case and in the unload case). The error string is also total crap, and says "Unable to create " DRV_NAME " proc directory\n"); Even though it doesn't actually create a proc directory named DRV_NAME at all. So that patch looks like total and utter crap to me. The commit message says "Keep /proc/net/ieee80211 under the original name to avoid breaking user interface." but the thing is, it really didn't fix anything but that one create thing. It needs to fix all the other cases too. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Tested-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-01Linux 2.6.37-rc1v2.6.37-rc1Linus Torvalds
2010-11-01Merge branch 'for-linus' of git://www.jni.nu/crisLinus Torvalds
* 'for-linus' of git://www.jni.nu/cris: CRIS: Add paths for CRISv10 serial driver CRIS: Fix RS485 delay handling. Add missing "struct" to in sizeof.
2010-11-01Merge branch 'next-spi' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds
* 'next-spi' of git://git.secretlab.ca/git/linux-2.6: spi/pl022: fix erroneous platform data in U300 spi: fixed odd static string conventions in core code spi/bfin_spi: only request GPIO on first load spi/bfin_spi: handle error/status changes after data interrupts spi: enable spi_board_info to be registered after spi_master
2010-11-01CRIS: Add paths for CRISv10 serial driverJesper Nilsson
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-11-01spi/pl022: fix erroneous platform data in U300Linus Walleij
This fixes an erroneous use of LSB first in the U300 machine, the PL022 used in U300 is a standard ARM core that doesn't support this bit so it should never have been set. Cc: Kevin Wells <wellsk40@gmail.com>OA Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-31Input: ir-keytable - fix uninitialized variable warningDmitry Torokhov
We were forgetting to set up proper return value in success path causing ir_getkeycode() to fail intermittently: drivers/media/IR/ir-keytable.c: In function 'ir_getkeycode': drivers/media/IR/ir-keytable.c:363: warning: 'retval' may be used uninitialized in this function Reported-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-31Merge branch 'i2c-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging * 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: i2c-i801: Add PCI idents for Patsburg 'IDF' SMBus controllers i2c-i801: Handle multiple instances instead of keeping global state i2c-i801: Add Intel Patsburg device ID i2c: Drop unused I2C_CLASS_TV flags
2010-10-31Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: appletouch - remove extra KERN_DEBUG use from dprintk Input: bu21013_ts - fix null dereference in error handling Input: ad7879 - prevent invalid finger data reports
2010-10-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (70 commits) [SCSI] pmcraid: add support for set timestamp command and other fixes [SCSI] pmcraid: remove duplicate struct member [SCSI] qla4xxx: Fix cmd check in qla4xxx_cmd_wait [SCSI] megaraid_sas: Version and documentation update [SCSI] megaraid_sas: Add three times Online controller reset [SCSI] megaraid_sas: Add input parameter for max_sectors [SCSI] megaraid_sas: support devices update flag [SCSI] libosd: write/read_sg_kern API [SCSI] libosd: Support for scatter gather write/read commands [SCSI] libosd: Free resources in reverse order of allocation [SCSI] libosd: Fix bug in attr_page handling [SCSI] lpfc 8.3.18: Update lpfc driver version to 8.3.18 [SCSI] lpfc 8.3.18: Add new WQE support [SCSI] lpfc 8.3.18: Fix critical errors [SCSI] lpfc 8.3.18: Adapter Shutdown and Unregistration cleanup [SCSI] lpfc 8.3.18: Add logic to detect last devloss timeout [SCSI] lpfc 8.3.18: Add support of received ELS commands [SCSI] lpfc 8.3.18: FC/FCoE Discovery fixes [SCSI] ipr: add definitions for a new adapter [SCSI] bfa: fix comments for c files ...
2010-10-31Merge branches 'irq-core-for-linus' and 'core-locking-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: genirq: Fix up irq_node() for irq_data changes. genirq: Add single IRQ reservation helper genirq: Warn if enable_irq is called before irq is set up * 'core-locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: semaphore: Remove mutex emulation staging: Final semaphore cleanup jbd2: Convert jbd2_slab_create_sem to mutex hpfs: Convert sbi->hpfs_creation_de to mutex Fix up trivial change/delete conflicts with deleted 'dream' drivers (drivers/staging/dream/camera/{mt9d112.c,mt9p012_fox.c,mt9t013.c,s5k3e2fx.c})
2010-10-31i2c-i801: Add PCI idents for Patsburg 'IDF' SMBus controllersDavid Woodhouse
These are the extra 'Integrated Device Function' SMBus controllers found on the Patsburg chipset. Mention the absence of slave mode support. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-31i2c-i801: Handle multiple instances instead of keeping global stateDavid Woodhouse
It's poor form to keep driver state in global variables rather than per-instance. It never really mattered in practice when there was only one controller on the chipset, but the latest chipsets do have more than one controller, so now we care. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-31i2c-i801: Add Intel Patsburg device IDSeth Heasley
Add support for the Intel Patsburg PCH SMBus Controller. Signed-off-by: Seth Heasley <seth.heasley@intel.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-31i2c: Drop unused I2C_CLASS_TV flagsJean Delvare
There are no users left for I2C_CLASS_TV_ANALOG and I2C_CLASS_TV_DIGITAL, so we can get rid of them. Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-31Input: appletouch - remove extra KERN_DEBUG use from dprintkJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-10-31locks: remove fl_copy_lock lock_manager operationChristoph Hellwig
This one was only used for a nasty hack in nfsd, which has recently been removed. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit (git 2.34.1) at 2025-09-14 22:35:32 +0000