summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-09-06ARM: tegra: remove duplicate select USE_OFStephen Warren
ARCH_TEGRA (arch/arm/Kconfig) now selects USE_OF, so there's not need for ARCH_TEGRA_3x_SOC to do so too. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-09-06ARM: tegra: use IO_ADDRESS for getting virtual addressLaxman Dewangan
Use macro IO_ADDRESS for getting virtual address of corresponding physical address to make the consistency with rest of Tegra code-base. This macro calls the IO_TO_VIRT() which is defined in arch/arm/mach-tegra/include/mach/iomap.h Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-09-06CIFS: Fix endianness conversionPavel Shilovsky
Signed-off-by: Pavel Shilovsky <pshilovsky@etersoft.ru> Signed-off-by: Steve French <smfrench@gmail.com>
2012-09-06CIFS: Fix error handling in cifs_push_mandatory_locksPavel Shilovsky
Cc: <stable@vger.kernel.org> Signed-off-by: Pavel Shilovsky <pshilovsky@etersoft.ru> Signed-off-by: Steve French <smfrench@gmail.com>
2012-09-06Merge tag 'fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC bug fixes from Olof Johansson: "Mostly Renesas and Atmel bugfixes this time, targeting boot and build problems. A couple of patches for gemini and kirkwood as well. On a whole nothing very controversial." * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: gemini: fix the gemini build ARM: shmobile: armadillo800eva: enable rw rootfs mount ARM: Kirkwood: Fix 'SZ_1M' undeclared here for db88f6281-bp-setup.c ARM: shmobile: mackerel: fixup usb module order ARM: shmobile: armadillo800eva: fixup: sound card detection order ARM: shmobile: marzen: fixup smsc911x id for regulator ARM: at91/feature-removal-schedule: delay at91_mci removal ARM: mach-shmobile: armadillo800eva: Enable power button as wakeup source ARM: mach-shmobile: armadillo800eva: Fix GPIO buttons descriptions ARM: at91/dts: remove partial parameter in at91sam9g25ek.dts ARM: at91/clock: fix PLLA overclock warning ARM: at91: fix rtc-at91sam9 irq issue due to sparse irq support ARM: at91: fix system timer irq issue due to sparse irq support ARM: shmobile: sh73a0: fixup RELOC_BASE of intca_irq_pins_desc
2012-09-06kobject: fix oops with "input0: bad kobj_uevent_env content in show_uevent()"Bjørn Mork
Fengguang Wu <fengguang.wu@intel.com> writes: > After the __devinit* removal series, I can still get kernel panic in > show_uevent(). So there are more sources of bug.. > > Debug patch: > > @@ -343,8 +343,11 @@ static ssize_t show_uevent(struct device > goto out; > > /* copy keys to file */ > - for (i = 0; i < env->envp_idx; i++) > + dev_err(dev, "uevent %d env[%d]: %s/.../%s\n", env->buflen, env->envp_idx, top_kobj->name, dev->kobj.name); > + for (i = 0; i < env->envp_idx; i++) { > + printk(KERN_ERR "uevent %d env[%d]: %s\n", (int)count, i, env->envp[i]); > count += sprintf(&buf[count], "%s\n", env->envp[i]); > + } > > Oops message, the env[] is again not properly initilized: > > [ 44.068623] input input0: uevent 61 env[805306368]: input0/.../input0 > [ 44.069552] uevent 0 env[0]: (null) This is a completely different CONFIG_HOTPLUG problem, only demonstrating another reason why CONFIG_HOTPLUG should go away. I had a hard time trying to disable it anyway ;-) The problem this time is lots of code assuming that a call to add_uevent_var() will guarantee that env->buflen > 0. This is not true if CONFIG_HOTPLUG is unset. So things like this end up overwriting env->envp_idx because the array index is -1: if (add_uevent_var(env, "MODALIAS=")) return -ENOMEM; len = input_print_modalias(&env->buf[env->buflen - 1], sizeof(env->buf) - env->buflen, dev, 0); Don't know what the best action is, given that there seem to be a *lot* of this around the kernel. This patch "fixes" the problem for me, but I don't know if it can be considered an appropriate fix. [ It is the correct fix for now, for 3.7 forcing CONFIG_HOTPLUG to always be on is the longterm fix, but it's too late for 3.6 and older kernels to resolve this that way - gregkh ] Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Tested-by: Fengguang Wu <fengguang.wu@intel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-06usb: dwc3: gadget: fix pending isoc handlingPratyush Anand
If xfernotready is received and there is no request in request_list then REQUEST_PENDING flag must be set, so that next request in ep queue is executed. In case of isoc transfer, if xfernotready is already elapsed and even first request has not been queued to request_list, then issue END TRANSFER, so that you can receive xfernotready again and can have notion of current microframe. Signed-off-by: Pratyush Anand <pratyush.anand@st.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-09-06usb: renesas_usbhs: fixup DMA transport data alignmentKuninori Morimoto
renesas_usbhs dma can transport 8byte alignment data, not 4byte. This patch fixup it. Reported-by: Sugnan Prabhu S <sugnan.prabhu@renesasmobile.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-09-06usb: gadget: at91udc: Don't check for ep->ep.descSebastian Andrzej Siewior
Earlier we used to check for ep->ep.desc to figure out if this ep has already been enabled and if so, abort. Ido Shayevitz removed the usb_endpoint_descriptor from private udc structure 5a6506f00 ("usb: gadget: Update at91_udc to use usb_endpoint_descriptor inside the struct usb_ep") but did not fix up the ep_enable condition because _now_ the member is always true and we can't check if this ep is enabled twice. Cc: Ido Shayevitz <idos@codeaurora.org> Tested-by: Fabio Porcedda <fabio.porcedda@gmail.com> Tested-by: Mario Isidoro <Mario.Isidoro@tecmic.pt> Cc: <stable@kernel.org> # v3.5 Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-09-06usb: gadget: at91udc: don't overwrite driver dataSebastian Andrzej Siewior
The driver was converted to the new start/stop interface in f3d8bf34c2 ("usb: gadget: at91_udc: convert to new style start/stop interface"). I overlooked that the driver is overwritting the private data which is used by the composite framework. The udc driver doesn't read it, it is only written here. Tested-by: Fabio Porcedda <fabio.porcedda@gmail.com> Tested-by: Mario Isidoro <Mario.Isidoro@tecmic.pt> Cc: <stable@kernel.org> # v3.5 Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-09-06usb: dwc3: core: fix incorrect usage of resource pointerKishon Vijay Abraham I
Populate the resources for xhci afresh instead of directly using the *struct resource* of core. *resource* structure has parent, sibling, child pointers which should be filled only by resource API's. By directly using the *resource* pointer of core in xhci, these parent, sibling, child pointers are already populated even before *platform_device_add* causing side effects. Cc: stable@vger.kernel.org # v3.4, v3.5 Reported-by: Ruchika Kharwar <ruchika@ti.com> Tested-by: Moiz Sonasath <m-sonasath@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-09-06usb: musb: musbhsdma: fix IRQ checkSergei Shtylyov
dma_controller_create() in this MUSB DMA driver only regards 0 as a wrong IRQ number, despite platform_get_irq_byname() that it calls returns -ENXIO in that case. It leads to calling request_irq() with a negative IRQ number, and when it naturally fails, the following is printed to the console: request_irq -6 failed! and the DMA controller is not created. Fix this function to filter out the error values as well as 0. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-09-06usb: musb: tusb6010: fix error path in tusb_probe()Sergei Shtylyov
On platform_device_add() failure, the TUSB6010 glue layer forgets to call platform_device_put() -- probably due to a typo... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-09-06usb: musb: host: fix for musb_start_urb Oopsyuzheng ma
when using musb_urb_enqueue to submit three urbs to the same endpoint, when hep->hcpriv is NULL, qh will be allocated when the first urb is completed. When the IRQ completes the next two urbs, qh->hep->hcpriv will be set to NULL. Now the second urb get musb->lock and executes musb_schedule(), but next_urb(qh) is NULL, so musb_start_urb will Oops. [ balbi@ti.com : practically rewrote commit log so it makes sense ] Signed-off-by: mayuzheng <myz147@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-09-06usb: gadget: dummy_hcd: add support for USB_DT_BOS on rhSebastian Andrzej Siewior
Without a reply for USB_DT_BOS the USB3 mode does not work since 448b6eb1 ("USB: Make sure to fetch the BOS desc for roothubs.). Cc: stable@vger.kernel.org #v3.5 Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-09-06usb: gadget: dummy_hcd: fixup error probe pathSebastian Andrzej Siewior
If USB2 host controller probes fine but USB3 does not then we don't remove the USB controller properly and lock up the system while the HUB code will try to enumerate the USB2 controller and access memory which is no longer available in case the dummy_hcd was compiled as a module. This is a problem since 448b6eb1 ("USB: Make sure to fetch the BOS desc for roothubs.) if used in USB3 mode because dummy does not provide this descriptor and explodes later. Cc: stable@vger.kernel.org # v3.5 Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-09-06usb: gadget: s3c-hsotg.c: fix error return codeJulia Lawall
Convert a 0 error return code to a negative one, as returned elsewhere in the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ identifier ret; expression e,e1,e2,e3,e4,x; @@ ( if (\(ret != 0\|ret < 0\) || ...) { ... return ...; } | ret = 0 ) ... when != ret = e1 *x = \(kmalloc\|kzalloc\|kcalloc\|devm_kzalloc\|ioremap\|ioremap_nocache\|devm_ioremap\|devm_ioremap_nocache\)(...); ... when != x = e2 when != ret = e3 *if (x == NULL || ...) { ... when != ret = e4 * return ret; } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-09-06usb: dwc3: ep0: correct cache sync issue in case of ep0_bouncedPratyush Anand
In case of ep0 out, if length is not aligned to maxpacket size then we use dwc->ep_bounce_addr for dma transfer and not request->dma. Since, we have alreday done memcpy from dwc->ep0_bounce to request->buf, so we do not need to issue cache sync function. In fact, cache sync function will bring wrong data in request->buf from request->dma in this scenario. So, cache sync function must not be executed in case of ep0 bounced. Cc: <stable@vger.kernel.org> # v3.4 v3.5 Signed-off-by: Pratyush Anand <pratyush.anand@st.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-09-06usb: gadget: add multiple definition guardsAndrzej Pietrasiewicz
If f_fs.c and u_serial.c are combined together using #include, which has been a common practice so far, the pr_vdebug macro is defined multiple times. Define it only once. Acked-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-09-06Merge tag 'hwmon-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull a hwmon fix from Guenter Roeck: "One patch, fixing DIV_ROUND_CLOSEST to support negative dividends. While the changes are not in the drivers/hwmon directory, the problem primarily affects hwmon drivers, and it makes sense to push the patch through the hwmon tree." * tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: linux/kernel.h: Fix DIV_ROUND_CLOSEST to support negative dividends
2012-09-06Merge branch 'rc-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild Pull kbuild fixes from Michal Marek: "These are two fixes that should go into 3.6. The link-vmlinux.sh one is obvious. The other one fixes make firmware_install with certain configurations, where a file in the toplevel firmware tree gets installed first, and $(INSTALL_FW_PATH)/$$(dir <file>) results in /lib/firmware/./, which confuses make 3.82 for some reason." * 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: firmware: fix directory creation rule matching with make 3.82 link-vmlinux.sh: Fix stray "echo" in error message
2012-09-06Remove user-triggerable BUG from mpol_to_strDave Jones
Trivially triggerable, found by trinity: kernel BUG at mm/mempolicy.c:2546! Process trinity-child2 (pid: 23988, threadinfo ffff88010197e000, task ffff88007821a670) Call Trace: show_numa_map+0xd5/0x450 show_pid_numa_map+0x13/0x20 traverse+0xf2/0x230 seq_read+0x34b/0x3e0 vfs_read+0xac/0x180 sys_pread64+0xa2/0xc0 system_call_fastpath+0x1a/0x1f RIP: mpol_to_str+0x156/0x360 Cc: stable@vger.kernel.org Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-09-06tty: uartclk value from serial_core exposed to sysfsTomas Hlavacek
Added file /sys/devices/.../tty/ttySX/uartclk to allow reading uartclk value in struct uart_port in serial_core via sysfs. tty_register_device() has been generalized and refactored in order to add support for setting drvdata and attribute_group to the device. Signed-off-by: Tomas Hlavacek <tmshlvck@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-06serial: serial_core.h needs console.h included firstStephen Rothwell
Fixes these build errors: In file included from drivers/tty/serial/sccnxp.c:20:0: include/linux/serial_core.h: In function 'uart_handle_break': include/linux/serial_core.h:543:30: error: dereferencing pointer to incomplete type Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-06serial: mxs-auart: put the device in mxs_auart_probe()Huang Shijie
We call the get_device() in the mxs_auart_probe(). For the balance of the reference count, we should put the device in the mxs_auart_remove(). Signed-off-by: Huang Shijie <shijie8@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-06serial: mxs-auart: fix the wrong setting orderHuang Shijie
After set the AUART_CTRL0_CLKGATE, the UART will gate all the clocks off. So the following line will not take effect. ................................................................ writel(AUART_INTR_RXIEN | AUART_INTR_RTIEN | AUART_INTR_CTSMIEN, u->membase + AUART_INTR_CLR); ................................................................ To fix this issue, the patch moves this gate-off line to the end of setting registers. Signed-off-by: Huang Shijie <shijie8@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-06serial_core: fix sizeof(pointer)Fengguang Wu
sizeof when applied to a pointer typed expression gives the size of the pointer. Generated by: scripts/coccinelle/misc/noderef.cocci Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-06serial: omap: enable RX and TX FIFO usageFelipe Balbi
enable RX FIFO for 16 characters and TX FIFO for 16 spaces. Tested-by: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-06serial: omap: move uart_omap_port definition to C fileFelipe Balbi
nobody needs to access the uart_omap_port structure other than omap-serial.c file. Let's move that structure definition to the C source file in order to prevent anyone from accessing our structure. Tested-by: Shubhrajyoti D <shubhrajyoti@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-06serial: omap: remove unnecessary header and add a missing oneFelipe Balbi
this driver doesn't use any from <plat/dmtimer.h>, so we can remove it without any problems. This will, however cause a problem because omap-serial.c was relying on indirect inclusion of <linux/platform_device.h>, let's fix the issue by including <linux/platform_device.h> on omap-serial.c as it should be. Tested-by: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-06serial: omap: fix software flow controlVikram Pandita
Software flow control register bits were not defined correctly. Also clarify the IXON and IXOFF logic to reflect what userspace wants. Cc: stable@vger.kernel.org Tested-by: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by: Vikram Pandita <vikram.pandita@ti.com> Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-06serial: omap: make sure to put() on poll_get_charFelipe Balbi
if we would reach serial_omap_get_char() while Data Ready bit isn't set, we would return from it without kicking our pm timer. This would mean we would, eventually, have an unbalanced pm_runtime_get on our device which would prevent it from ever sleeping again. Tested-by: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-06serial: omap: implement set_wakeFelipe Balbi
This has been missing from OMAP UART driver for quite a while and it's simple enough to implement it. Tested-by: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-06serial: omap: unlock the port lockRuchika Kharwar
This patch unlocks the port lock before calling a serial_core API and re-acquires the port lock after calling it. This patch fixes a system freeze issue seen when the serial_core API uart_write_wakeup() eventually attempts to acquire the port lock already acquired by omap serial interrupt handler. Tested-by: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by: Ruchika Kharwar <ruchika@ti.com> Signed-off-by: Pavan Savoy <pavan_savoy@ti.com> Signed-off-by: Vijay Badawadagi <bvijay@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-06serial: omap: drop "inline" from IRQ handler prototypeFelipe Balbi
it makes no sense to mark our IRQ handler inline since it's passed as a function pointer when enabling the IRQ line. Tested-by: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-06serial: omap: optimization with section annotationsFelipe Balbi
Two functions: omap_serial_fill_features_erratas() and of_get_uart_port_info() are only called from probe(). Marking them as __devinit gives us another oportunity to free some code after .init.text is done. Tested-by: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by: Ruchika Kharwar <ruchika@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-06serial: omap: fix sequence of pm_runtime_* calls.Ruchika Kharwar
pm_runtime_enable() needs to be invoked before pm_runtime_use_autosuspend(), and pm_runtime_set_autosuspend_delay() functions. Tested-by: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Ruchika Kharwar <ruchika@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-06serial: omap: don't save IRQ flags on hardirqFelipe Balbi
When we're running our hardirq handler, there's not need to disable IRQs with spin_lock_irqsave() because IRQs are already disabled. It also makes no difference if we save or not IRQ flags. Switch over to simple spin_lock/spin_unlock and drop the "flags" variable. Tested-by: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-06serial: omap: make sure to suspend device before removeFelipe Balbi
before removing the driver, let's make sure to force device into a suspended state in order to conserve power. Tested-by: Shubhrajyoti D <shubhrajyoti@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-06serial: omap: drop unnecessary check from removeFelipe Balbi
if platform_get_drvdata() returns NULL, that's quite a nasty bug on the driver which we want to catch ASAP. Otherwise, that check is hugely unneeded. Tested-by: Shubhrajyoti D <shubhrajyoti@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-06serial: omap: set dev->drvdata before enabling pm_runtimeFelipe Balbi
by the time we call our first pm_runtme_get_sync() after enable pm_runtime, our resume method might be called. To avoid problems, we must make sure that our dev->drvdata is set correctly before our resume method gets called. Tested-by: Shubhrajyoti D <shubhrajyoti@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-06serial: omap: stick to put_autosuspendFelipe Balbi
Everytime we're done using our TTY, we want the pm timer to be reinitilized. By sticking to pm_runtime_pm_autosuspend() we make sure that this will always be the case. The idea behind this patch is to make sure we will always reinitialize the pm timer so that we don't fall into a situation where pm_runtime_put() expires right away (if timer was already about to expire when we made the call to pm_runtime_put()). While suspending right away wouldn't cause any issues, reinitializing the pm timer can help us avoiding unnecessary context save & restore operations (which are somewhat expensive) if there's another read/write/set_termios request coming right after. IOW, we are trying to make sure UART is still powered up while it's still under heavy usage. Tested-by: Shubhrajyoti D <shubhrajyoti@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-06serial: omap: move THRE check to transmit_chars()Felipe Balbi
since all other IRQ types now do all necessary checks inside their handlers, transmit_chars() was the only one left expecting serial_omap_irq() to check THRE for it. We can move THRE check to transmit_chars() in order to make serial_omap_irq() more uniform. Tested-by: Shubhrajyoti D <shubhrajyoti@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-06serial: omap: refactor receive_chars() into rdi/rlsi handlersFelipe Balbi
receive_chars() was getting too big and too difficult to follow. By splitting it into separate RDI and RSLI handlers, we have smaller functions which are easy to understand and only touch the pieces which they need to touch. Tested-by: Shubhrajyoti D <shubhrajyoti@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-06serial: omap: simplify IRQ handlingFelipe Balbi
quite a few changes here, though they are pretty obvious. In summary we're making sure to detect which interrupt type we need to handle before calling the underlying interrupt handling procedure. Tested-by: Shubhrajyoti D <shubhrajyoti@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-06serial: add OMAP-specific definesFelipe Balbi
OMAP has some extra Interrupt types which can be really useful for SW. Let's define them so we can later use those in OMAP's serial driver. Tested-by: Shubhrajyoti D <shubhrajyoti@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-06serial: omap: drop DMA supportFelipe Balbi
The current support is known to be broken and a later patch will come re-adding it using dma engine API. Tested-by: Shubhrajyoti D <shubhrajyoti@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-06serial: omap: don't access the platform_deviceFelipe Balbi
The driver doesn't need to know about its platform_device. Everything the driver needs can be done through the struct device pointer. In case we need to use the OMAP-specific PM function pointers, those can make sure to find the device's platform_device pointer so they can find the struct omap_device through pdev->archdata field. Tested-by: Shubhrajyoti D <shubhrajyoti@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-06NFSv4: Fix buffer overflow checking in __nfs4_get_acl_uncachedTrond Myklebust
Pass the checks made by decode_getacl back to __nfs4_get_acl_uncached so that it knows if the acl has been truncated. The current overflow checking is broken, resulting in Oopses on user-triggered nfs4_getfacl calls, and is opaque to the point where several attempts at fixing it have failed. This patch tries to clean up the code in addition to fixing the Oopses by ensuring that the overflow checks are performed in a single place (decode_getacl). If the overflow check failed, we will still be able to report the acl length, but at least we will no longer attempt to cache the acl or copy the truncated contents to user space. Reported-by: Sachin Prabhu <sprabhu@redhat.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Tested-by: Sachin Prabhu <sprabhu@redhat.com>
2012-09-06xen/pciback: Fix proper FLR steps.Konrad Rzeszutek Wilk
When we do FLR and save PCI config we did it in the wrong order. The end result was that if a PCI device was unbind from its driver, then binded to xen-pciback, and then back to its driver we would get: > lspci -s 04:00.0 04:00.0 Ethernet controller: Intel Corporation 82574L Gigabit Network Connection 13:42:12 # 4 :~/ > echo "0000:04:00.0" > /sys/bus/pci/drivers/pciback/unbind > modprobe e1000e e1000e: Intel(R) PRO/1000 Network Driver - 2.0.0-k e1000e: Copyright(c) 1999 - 2012 Intel Corporation. e1000e 0000:04:00.0: Disabling ASPM L0s L1 e1000e 0000:04:00.0: enabling device (0000 -> 0002) xen: registering gsi 48 triggering 0 polarity 1 Already setup the GSI :48 e1000e 0000:04:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode e1000e: probe of 0000:04:00.0 failed with error -2 This fixes it by first saving the PCI configuration space, then doing the FLR. Reported-by: Ren, Yongjie <yongjie.ren@intel.com> Reported-and-Tested-by: Tobias Geiger <tobias.geiger@vido.info> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> CC: stable@vger.kernel.org
generated by cgit (git 2.34.1) at 2025-09-20 03:06:42 +0000