summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-04-13USB: serial: xr: rename GPIO-pin definesJohan Hovold
Rename the GPIO-pin defines so that they reflect how they are used. Signed-off-by: Johan Hovold <johan@kernel.org>
2021-04-13USB: serial: xr: rename GPIO-mode definesJohan Hovold
Rename the GPIO mode defines so that they reflect the datasheet and how they are used. Signed-off-by: Johan Hovold <johan@kernel.org>
2021-04-13USB: serial: xr: add support for XR21V1412 and XR21V1414Johan Hovold
Add support for the two- and four-port variants of XR21V1410. Use the interface number of each control interface (e.g. 0, 2, 4, 6) to derive the zero-based channel index: XR21V1410 0 XR21V1412 0, 1 XR21V1414 0, 1, 2, 3 Note that the UART registers reside in separate blocks per channel, while the UART Manager functionality is implemented using per-channel registers. Signed-off-by: Johan Hovold <johan@kernel.org>
2021-04-13arm64: pac: Optimize kernel entry/exit key installation code pathsPeter Collingbourne
The kernel does not use any keys besides IA so we don't need to install IB/DA/DB/GA on kernel exit if we arrange to install them on task switch instead, which we can expect to happen an order of magnitude less often. Furthermore we can avoid installing the user IA in the case where the user task has IA disabled and just leave the kernel IA installed. This also lets us avoid needing to install IA on kernel entry. On an Apple M1 under a hypervisor, the overhead of kernel entry/exit has been measured to be reduced by 15.6ns in the case where IA is enabled, and 31.9ns in the case where IA is disabled. Signed-off-by: Peter Collingbourne <pcc@google.com> Link: https://linux-review.googlesource.com/id/Ieddf6b580d23c9e0bed45a822dabe72d2ffc9a8e Link: https://lore.kernel.org/r/2d653d055f38f779937f2b92f8ddd5cf9e4af4f4.1616123271.git.pcc@google.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2021-04-13arm64: Introduce prctl(PR_PAC_{SET,GET}_ENABLED_KEYS)Peter Collingbourne
This change introduces a prctl that allows the user program to control which PAC keys are enabled in a particular task. The main reason why this is useful is to enable a userspace ABI that uses PAC to sign and authenticate function pointers and other pointers exposed outside of the function, while still allowing binaries conforming to the ABI to interoperate with legacy binaries that do not sign or authenticate pointers. The idea is that a dynamic loader or early startup code would issue this prctl very early after establishing that a process may load legacy binaries, but before executing any PAC instructions. This change adds a small amount of overhead to kernel entry and exit due to additional required instruction sequences. On a DragonBoard 845c (Cortex-A75) with the powersave governor, the overhead of similar instruction sequences was measured as 4.9ns when simulating the common case where IA is left enabled, or 43.7ns when simulating the uncommon case where IA is disabled. These numbers can be seen as the worst case scenario, since in more realistic scenarios a better performing governor would be used and a newer chip would be used that would support PAC unlike Cortex-A75 and would be expected to be faster than Cortex-A75. On an Apple M1 under a hypervisor, the overhead of the entry/exit instruction sequences introduced by this patch was measured as 0.3ns in the case where IA is left enabled, and 33.0ns in the case where IA is disabled. Signed-off-by: Peter Collingbourne <pcc@google.com> Reviewed-by: Dave Martin <Dave.Martin@arm.com> Link: https://linux-review.googlesource.com/id/Ibc41a5e6a76b275efbaa126b31119dc197b927a5 Link: https://lore.kernel.org/r/d6609065f8f40397a4124654eb68c9f490b4d477.1616123271.git.pcc@google.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2021-04-13arm64: mte: make the per-task SCTLR_EL1 field usable elsewherePeter Collingbourne
In an upcoming change we are going to introduce per-task SCTLR_EL1 bits for PAC. Move the existing per-task SCTLR_EL1 field out of the MTE-specific code so that we will be able to use it from both the PAC and MTE code paths and make the task switching code more efficient. Signed-off-by: Peter Collingbourne <pcc@google.com> Link: https://linux-review.googlesource.com/id/Ic65fac78a7926168fa68f9e8da591c9e04ff7278 Link: https://lore.kernel.org/r/13d725cb8e741950fb9d6e64b2cd9bd54ff7c3f9.1616123271.git.pcc@google.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2021-04-13tracing/dynevent: Fix a memory leak in an error handling pathChristophe JAILLET
We must free 'argv' before returning, as already done in all the other paths of this function. Link: https://lkml.kernel.org/r/21e3594ccd7fc88c5c162c98450409190f304327.1618136448.git.christophe.jaillet@wanadoo.fr Fixes: d262271d0483 ("tracing/dynevent: Delegate parsing to create function") Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-04-13USB: serial: ti_usb_3410_5052: clean up termios CSIZE handlingJohan Hovold
Remove the random white space from the CSIZE switch. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2021-04-13USB: serial: ti_usb_3410_5052: use kernel types consistentlyJohan Hovold
Replace the remaining uses of user-space __XX types. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2021-04-13USB: serial: ti_usb_3410_5052: add port-command helpersJohan Hovold
Add two port-command helpers to handle the UART module-id parameter instead of open coding. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2021-04-13USB: serial: ti_usb_3410_5052: clean up vendor-request helpersJohan Hovold
Make the vendor-request helpers data parameters be void pointers and drop the caller casts. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2021-04-13USB: serial: ti_usb_3410_5052: drop unnecessary packed attributesJohan Hovold
Drop unnecessary packed attributes from structures that don't need it. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2021-04-13USB: serial: io_ti: drop unnecessary packed attributesJohan Hovold
Drop unnecessary packed attributes from structures that don't need it and use the __packed macro consistently. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2021-04-13USB: serial: io_ti: use kernel types consistentlyJohan Hovold
Use kernel types consistently by replacing the remaining __uXX types. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2021-04-13USB: serial: io_ti: add read-port-command helperJohan Hovold
Add a read-port-command helper analogous to the send-port-command helper to take care of the UART module id instead of open coding. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2021-04-13USB: serial: io_ti: add send-port-command helperJohan Hovold
Add a send-port-command helper which takes care of determining the UART module id when sending commands instead of doing so at every call site. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2021-04-13USB: serial: io_ti: clean up vendor-request helpersJohan Hovold
Clean up the vendor-request helpers by using kernel-types consistently and using void pointers for the data arguments, which allows removing a cast from one caller. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2021-04-13USB: serial: ti_usb_3410_5052: drop drain delay for 3410Johan Hovold
Unlike the TUSB5052, the TUSB3410 has an LSR TEMT bit to tell if both the transmitter data and shift registers are empty. Make sure to check also the shift register on TUSB3410 when waiting for the transmit buffer to drain during close and drop the time-based one-char delay which is otherwise needed (e.g. 90 ms at 110 bps). Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2021-04-13USB: serial: ti_usb_3410_5052: reduce drain delay to one charJohan Hovold
The three-character drain delay was added by commit f1175daa5312 ("USB: ti_usb_3410_5052: kill custom closing_wait") when removing the custom closing-wait implementation, which used a fixed 20 ms poll period and drain delay. This was likely a bit too conservative as a one-character timeout (e.g. 33 ms at 300 bps) should be enough to compensate for the lack of a transmitter empty bit in the TUSB5052 line-status register. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2021-04-13USB: serial: io_ti: document reason for drain delayJohan Hovold
Document that the device line-status register doesn't tell when the transmitter shift register has emptied and that this is why the one-character drain delay is needed. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2021-04-13USB: serial: f81232: drop time-based drain delayJohan Hovold
The f81232 driver now waits for the transmit FIFO to drain during close so there is no need to keep the time-based drain delay, which would add up to two seconds on every close for low line speeds. Fixes: 98405f81036d ("USB: serial: f81232: add tx_empty function") Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2021-04-13io_uring: inline io_iopoll_getevents()Pavel Begunkov
io_iopoll_getevents() is of no use to us anymore, io_iopoll_check() handles all the cases. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/7e50b8917390f38bee4f822c6f4a6a98a27be037.1618278933.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-04-13io_uring: skip futile iopoll iterationsPavel Begunkov
The only way to get out of io_iopoll_getevents() and continue iterating is to have empty iopoll_list, otherwise the main loop would just exit. So, instead of the unlock on 8th time heuristic, do that based on iopoll_list. Also, as no one can add new requests to iopoll_list while io_iopoll_check() hold uring_lock, it's useless to spin with the list empty, return in that case. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/5b8ebe84f5fff7ffa1f708952dfef7fc78b668e2.1618278933.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-04-13io_uring: don't fail overflow on in_idlePavel Begunkov
As CQE overflows are now untied from requests and so don't hold any ref, we don't need to handle exiting/exec'ing cases there anymore. Moreover, it's much nicer in regards to userspace to save overflowed CQEs whenever possible, so remove failing on in_idle. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/d873b7dab75c7f3039ead9628a745bea01f2cfd2.1618278933.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-04-13io_uring: clean up io_poll_remove_waitqs()Pavel Begunkov
Move some parts of io_poll_remove_waitqs() that are opcode independent. Looks better and stresses that both do __io_poll_remove_one(). Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/bbc717f82117cc335c89cbe67ec8d72608178732.1618278933.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-04-13io_uring: refactor hrtimer_try_to_cancel usesPavel Begunkov
Don't save return values of hrtimer_try_to_cancel() in a variable, but use right away. It's in general safer to not have an intermediate variable, which may be reused and passed out wrongly, but it be contracted out. Also clean io_timeout_extract(). Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/d2566ef7ce632e6882dc13e022a26249b3fd30b5.1618278933.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-04-13io_uring: add timeout completion_lock annotationPavel Begunkov
Add one more sparse locking annotation for readability in io_kill_timeout(). Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/bdbb22026024eac29203c1aa0045c4954a2488d1.1618278933.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-04-13io_uring: split poll and poll update structuresPavel Begunkov
struct io_poll_iocb became pretty nasty combining also update fields. Split them, so we would have more clarity to it. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/b2f74d64ffebb57a648f791681af086c7211e3a4.1618278933.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-04-13io_uring: fix uninit old data for poll event updPavel Begunkov
Both IORING_POLL_UPDATE_EVENTS and IORING_POLL_UPDATE_USER_DATA need old_user_data to find/cancel a poll request, but it's set only for the first one. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/ab08fd35b7652e977f9a475f01741b04102297f1.1618278933.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-04-13io_uring: fix leaking reg files on exitPavel Begunkov
If io_sqe_files_unregister() faults on io_rsrc_ref_quiesce(), it will fail to do unregister leaving files referenced. And that may well happen because of a strayed signal or just because it does allocations inside. In io_ring_ctx_free() do an unsafe version of unregister, as it's guaranteed to not have requests by that point and so quiesce is useless. Cc: stable@vger.kernel.org Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/e696e9eade571b51997d0dc1d01f144c6d685c05.1618278933.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-04-13lightnvm: deprecated OCSSD support and schedule it for removal in Linux 5.15Christoph Hellwig
Lightnvm was an innovative idea to expose more low-level control over SSDs. But it failed to get properly standardized and remains a non-standarized extension to NVMe that requires vendor specific quirks for a few now mostly obsolete SSD devices. The standardized ZNS command set for NVMe has take over a lot of the approaches and allows for fully standardized operation. Remove the Linux code to support open channel SSDs as the few production deployments of the above mentioned SSDs are using userspace driver stacks instead of the fairly limited Linux support. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Javier González <javier@javigon.com> Signed-off-by: Matias Bjørling <mb@lightnvm.io> Link: https://lore.kernel.org/r/20210413105257.159260-5-matias.bjorling@wdc.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-04-13lightnvm: remove duplicate include in lightnvm.hZhang Yunkai
'linux/blkdev.h' and 'uapi/linux/lightnvm.h' included in 'lightnvm.h' is duplicated.It is also included in the 5th and 7th line. Signed-off-by: Zhang Yunkai <zhang.yunkai@zte.com.cn> Signed-off-by: Matias Bjørling <matias.bjorling@wdc.com> Link: https://lore.kernel.org/r/20210413105257.159260-4-matias.bjorling@wdc.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-04-13lightnvm: return the correct return valueTian Tao
When memdup_user returns an error, memdup_user has two different return values, use PTR_ERR to get the correct return value. Signed-off-by: Tian Tao <tiantao6@hisilicon.com> Signed-off-by: Matias Bjørling <matias.bjorling@wdc.com> Link: https://lore.kernel.org/r/20210413105257.159260-3-matias.bjorling@wdc.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-04-13lightnvm: use kobj_to_dev()Chaitanya Kulkarni
This fixs coccicheck warning: drivers/nvme//host/lightnvm.c:1243:60-61: WARNING opportunity for kobj_to_dev() Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Matias Bjørling <matias.bjorling@wdc.com> Link: https://lore.kernel.org/r/20210413105257.159260-2-matias.bjorling@wdc.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-04-13memory: mtk-smi: Add device-link between smi-larb and smi-commonYong Wu
Normally, If the smi-larb HW need work, we should enable the smi-common HW power and clock firstly. This patch adds device-link between the smi-larb dev and the smi-common dev. then If pm_runtime_get_sync(smi-larb-dev), the pm_runtime_get_sync (smi-common-dev) will be called automatically. Also, Add DL_FLAG_STATELESS to avoid the smi-common clocks be gated when probe. CC: Matthias Brugger <matthias.bgg@gmail.com> Suggested-by: Tomasz Figa <tfiga@chromium.org> Signed-off-by: Yong Wu <yong.wu@mediatek.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20210410091128.31823-5-yong.wu@mediatek.com
2021-04-13memory: samsung: exynos5422-dmc: handle clk_set_parent() failureKrzysztof Kozlowski
clk_set_parent() can fail and ignoring such case could lead to invalid clock setup for given frequency. Addresses-Coverity: Unchecked return value Fixes: 6e7674c3c6df ("memory: Add DMC driver for Exynos5422") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Link: https://lore.kernel.org/r/20210407154535.70756-1-krzysztof.kozlowski@canonical.com
2021-04-13memory: renesas-rpc-if: fix possible NULL pointer dereference of resourceKrzysztof Kozlowski
The platform_get_resource_byname() can return NULL which would be immediately dereferenced by resource_size(). Instead dereference it after validating the resource. Addresses-Coverity: Dereference null return value Fixes: ca7d8b980b67 ("memory: add Renesas RPC-IF driver") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20210407154357.70200-1-krzysztof.kozlowski@canonical.com
2021-04-13vfio/pci: Add missing range check in vfio_pci_mmapChristian A. Ehrhardt
When mmaping an extra device region verify that the region index derived from the mmap offset is valid. Fixes: a15b1883fee1 ("vfio_pci: Allow mapping extra regions") Cc: stable@vger.kernel.org Signed-off-by: Christian A. Ehrhardt <lk@c--e.de> Message-Id: <20210412214124.GA241759@lisa.in-ulm.de> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2021-04-13ACPI: x86: Call acpi_boot_table_init() after acpi_table_upgrade()Rafael J. Wysocki
Commit 1a1c130ab757 ("ACPI: tables: x86: Reserve memory occupied by ACPI tables") attempted to address an issue with reserving the memory occupied by ACPI tables, but it broke the initrd-based table override mechanism relied on by multiple users. To restore the initrd-based ACPI table override functionality, move the acpi_boot_table_init() invocation in setup_arch() on x86 after the acpi_table_upgrade() one. Fixes: 1a1c130ab757 ("ACPI: tables: x86: Reserve memory occupied by ACPI tables") Reported-by: Hans de Goede <hdegoede@redhat.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-04-13ACPI: utils: Capitalize abbreviations in the commentsAndy Shevchenko
The DSDT and ACPI should be capitalized. Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-04-13ACPI: utils: Document for_each_acpi_dev_match() macroAndy Shevchenko
The macro requires to call acpi_dev_put() on each iteration. Due to this it doesn't tolerate sudden disappearence of the devices. Document all these nuances to prevent users blindly call it without understanding the possible issues. While at it, add the note to the acpi_dev_get_next_match_dev() and advertise acpi_dev_put() instead of put_device() in the whole family of the helper functions. Fixes: bf263f64e804 ("media: ACPI / bus: Add acpi_dev_get_next_match_dev() and helper macro") Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-04-13ACPI: bus: Introduce acpi_dev_get() and reuse it in ACPI codeAndy Shevchenko
Introduce acpi_dev_get() to have a symmetrical API with acpi_dev_put() and reuse both in ACPI code in drivers/acpi/. While at it, use acpi_bus_put_acpi_device() in one place instead of the above. Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-04-13arm64/sve: Remove redundant system_supports_sve() testsMark Brown
Currently there are a number of places in the SVE code where we check both system_supports_sve() and TIF_SVE. This is a bit redundant given that we should never get into a situation where we have set TIF_SVE without having SVE support and it is not clear that silently ignoring a mistakenly set TIF_SVE flag is the most sensible error handling approach. For now let's just drop the system_supports_sve() checks since this will at least reduce overhead a little. Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20210412172320.3315-1-broonie@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2021-04-13fs/locks: remove useless assignment in fcntl_getlkTian Tao
Function parameter 'cmd' is rewritten with unused value at locks.c Signed-off-by: Tian Tao <tiantao6@hisilicon.com> Signed-off-by: Jeff Layton <jlayton@kernel.org>
2021-04-13pinctrl: lewisburg: Update number of pins in communityYuanyuan Zhong
When updating pin names for Intel Lewisburg, the numbers of pins were left behind. Update them accordingly. Fixes: e66ff71fd0db ("pinctrl: lewisburg: Update pin list according to v1.1v6") Signed-off-by: Yuanyuan Zhong <yzhong@purestorage.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2021-04-13Merge tag 'amd-drm-next-5.13-2021-04-12' of ↵Daniel Vetter
https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-5.13-2021-04-12: amdgpu: - Re-enable GPU reset on VanGogh - Enable DPM flags for SMART_SUSPEND and MAY_SKIP_RESUME - Disentangle HG from vga_switcheroo - S0ix fixes - W=1 fixes - Resource iterator fixes - DMCUB updates - UBSAN fixes - More PM API cleanup - Aldebaran updates - Modifier fixes - Enable VCN load balancing with asymmetric engines - Rework BO structs - Aldebaran reset support - Initial LTTPR display work - Display MALL fixes - Fall back to YCbCr420 when YCbCr444 fails - SR-IOV fixes - RAS updates - Misc cleanups and fixes radeon: - Typo fixes - Fix error handling for firmware on r6xx - Fix a missing check in DP MST handling Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210412220732.3845-1-alexander.deucher@amd.com
2021-04-13usb: dwc2: Add exit clock gating before removing driverArtur Petrosyan
When dwc2 core is in clock gating mode loading driver again causes driver fail. Because in that mode registers are not accessible. Added a flow of exiting clock gating mode to avoid the driver reload failure. Signed-off-by: Artur Petrosyan <Arthur.Petrosyan@synopsys.com> Link: https://lore.kernel.org/r/20210413073731.3C81BA022E@mailhost.synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-13usb: dwc2: Add clock gating exiting flow by system resumeArtur Petrosyan
If not hibernation nor partial power down are supported, port resume is done using the clock gating programming flow. Adds a new flow of exiting clock gating when PC is resumed. Signed-off-by: Artur Petrosyan <Arthur.Petrosyan@synopsys.com> Link: https://lore.kernel.org/r/20210413073723.BA0FEA022E@mailhost.synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-13usb: dwc2: Add clock gating entering flow by system suspendArtur Petrosyan
If not hibernation nor partial power down are supported, clock gating is used to save power. Adds a new flow of entering clock gating when PC is suspended. Signed-off-by: Artur Petrosyan <Arthur.Petrosyan@synopsys.com> Link: https://lore.kernel.org/r/20210413073716.30C13A0094@mailhost.synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-13usb: dwc2: Allow exit clock gating in urb enqueueArtur Petrosyan
When core is in clock gating state and an external hub is connected, upper layer sends URB enqueue request, which results in port reset issue. Added exit from clock gating state to avoid port reset issue and process upper layer request properly. Signed-off-by: Artur Petrosyan <Arthur.Petrosyan@synopsys.com> Link: https://lore.kernel.org/r/20210413073708.ADFC6A0094@mailhost.synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit (git 2.34.1) at 2025-09-16 14:59:30 +0000