| Age | Commit message (Collapse) | Author |
|---|
|
Revert commit 0ed17f01c8540 ("xfs: introduce all-mounts list for cpu
hotplug notifications") because the cpu hotplug hooks are now pointless,
so we don't need this list anymore.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
|
|
Directly track which CPUs have contributed to the inodegc percpu lists
instead of trusting the cpu online mask. This eliminates a theoretical
problem where the inodegc flush functions might fail to flush a CPU's
inodes if that CPU happened to be dying at exactly the same time. Most
likely nobody's noticed this because the CPU dead hook moves the percpu
inodegc list to another CPU and schedules that worker immediately. But
it's quite possible that this is a subtle race leading to UAF if the
inodegc flush were part of an unmount.
Further benefits: This reduces the overhead of the inodegc flush code
slightly by allowing us to ignore CPUs that have empty lists. Better
yet, it reduces our dependence on the cpu online masks, which have been
the cause of confusion and drama lately.
Fixes: ab23a7768739 ("xfs: per-cpu deferred inode inactivation queues")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
|
|
Dave Chinner reported that xfs/273 fails if the AG size happens to be an
exact power of two. I traced this to an agbno integer overflow when the
current GETFSMAP call is a continuation of a previous GETFSMAP call, and
the last record returned was non-shareable space at the end of an AG.
__xfs_getfsmap_datadev sets up a data device query by converting the
incoming fmr_physical into an xfs_fsblock_t and cracking it into an agno
and agbno pair. In the (failing) case of where fmr_blockcount of the
low key is nonzero and the record was for a non-shareable extent, it
will add fmr_blockcount to start_fsb and info->low.rm_startblock.
If the low key was actually the last record for that AG, then this
addition causes info->low.rm_startblock to point beyond EOAG. When the
rmapbt range query starts, it'll return an empty set, and fsmap moves on
to the next AG.
Or so I thought. Remember how we added to start_fsb?
If agsize < 1<<agblklog, start_fsb points to the same AG as the original
fmr_physical from the low key. We run the rmapbt query, which returns
nothing, so getfsmap zeroes info->low and moves on to the next AG.
If agsize == 1<<agblklog, start_fsb now points to the next AG. We run
the rmapbt query on the next AG with the excessively large
rm_startblock. If this next AG is actually the last AG, we'll set
info->high to EOFS (which is now has a lower rm_startblock than
info->low), and the ranged btree query code will return -EINVAL. If
it's not the last AG, we ignore all records for the intermediate AGs.
Oops.
Fix this by decoding start_fsb into agno and agbno only after making
adjustments to start_fsb. This means that info->low.rm_startblock will
always be set to a valid agbno, and we always start the rmapbt iteration
in the correct AG.
While we're at it, fix the predicate for determining if an fsmap record
represents non-shareable space to include file data on pre-reflink
filesystems.
Reported-by: Dave Chinner <david@fromorbit.com>
Fixes: 63ef7a35912dd ("xfs: fix interval filtering in multi-step fsmap queries")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
|
|
In commit 7c8ade2121200 ("xfs: implement percpu cil space used
calculation"), the XFS committed (log) item list code was converted to
use per-cpu lists and space tracking to reduce cpu contention when
multiple threads are modifying different parts of the filesystem and
hence end up contending on the log structures during transaction commit.
Each CPU tracks its own commit items and space usage, and these do not
have to be merged into the main CIL until either someone wants to push
the CIL items, or we run over a soft threshold and switch to slower (but
more accurate) accounting with atomics.
Unfortunately, the for_each_cpu iteration suffers from the same race
with cpu dying problem that was identified in commit 8b57b11cca88f
("pcpcntrs: fix dying cpu summation race") -- CPUs are removed from
cpu_online_mask before the CPUHP_XFS_DEAD callback gets called. As a
result, both CIL percpu structure aggregation functions fail to collect
the items and accounted space usage at the correct point in time.
If we're lucky, the items that are collected from the online cpus exceed
the space given to those cpus, and the log immediately shuts down in
xlog_cil_insert_items due to the (apparent) log reservation overrun.
This happens periodically with generic/650, which exercises cpu hotplug
vs. the filesystem code:
smpboot: CPU 3 is now offline
XFS (sda3): ctx ticket reservation ran out. Need to up reservation
XFS (sda3): ticket reservation summary:
XFS (sda3): unit res = 9268 bytes
XFS (sda3): current res = -40 bytes
XFS (sda3): original count = 1
XFS (sda3): remaining count = 1
XFS (sda3): Filesystem has been shut down due to log error (0x2).
Applying the same sort of fix from 8b57b11cca88f to the CIL code seems
to make the generic/650 problem go away, but I've been told that tglx
was not happy when he saw:
"...the only thing we actually need to care about is that
percpu_counter_sum() iterates dying CPUs. That's trivial to do, and when
there are no CPUs dying, it has no addition overhead except for a
cpumask_or() operation."
The CPU hotplug code is rather complex and difficult to understand and I
don't want to try to understand the cpu hotplug locking well enough to
use cpu_dying mask. Furthermore, there's a performance improvement that
could be had here. Attach a private cpu mask to the CIL structure so
that we can track exactly which cpus have accessed the percpu data at
all. It doesn't matter if the cpu has since gone offline; log item
aggregation will still find the items. Better yet, we skip cpus that
have not recently logged anything.
Worse yet, Ritesh Harjani and Eric Sandeen both reported today that CPU
hot remove racing with an xfs mount can crash if the cpu_dead notifier
tries to access the log but the mount hasn't yet set up the log.
Link: https://lore.kernel.org/linux-xfs/ZOLzgBOuyWHapOyZ@dread.disaster.area/T/
Link: https://lore.kernel.org/lkml/877cuj1mt1.ffs@tglx/
Link: https://lore.kernel.org/lkml/20230414162755.281993820@linutronix.de/
Link: https://lore.kernel.org/linux-xfs/ZOVkjxWZq0YmjrJu@dread.disaster.area/T/
Cc: tglx@linutronix.de
Cc: peterz@infradead.org
Reported-by: ritesh.list@gmail.com
Reported-by: sandeen@sandeen.net
Fixes: af1c2146a50b ("xfs: introduce per-cpu CIL tracking structure")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
|
|
If we fail to schedule a request for transmission, there are 2
possibilities:
1) Either we hit a fatal error, and we just want to drop the remaining
requests on the floor.
2) We were asked to try again, in which case we should allow the
outstanding RPC calls to complete, so that we can recoalesce requests
and try again.
Fixes: d600ad1f2bdb ("NFS41: pop some layoutget errors to application")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Add 'const' to the definition of the 'trip' argument of the
.get_trend() thermal zone callback to indicate that the trip point
passed to it should not be modified by it and adjust the
callback functions implementing it, thermal_get_trend() in the
ACPI thermal driver and __ti_thermal_get_trend(), accordingly.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Michal Wilczynski <michal.wilczynski@intel.com>
|
|
for_each_child_of_node performs an of_node_get on each
iteration, so a break out of the loop requires an
of_node_put.
This was done using the Coccinelle semantic patch
iterators/for_each_child.cocci
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The rpmsg pcm device is a device which should support
double buffering.
Found this issue with pipewire. When there is no
SNDRV_PCM_INFO_BATCH flag in driver, the pipewire will
set headroom to be zero, and because rpmsg pcm device
don't support residue report, when the latency setting
is small, the "delay" always larger than "target" in
alsa-pcm.c, that reading next period data is not
scheduled on time.
With SNDRV_PCM_INFO_BATCH flag in driver, the pipewire
will select a smaller period size for device, then
the task of reading next period data will be scheduled
on time.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1694414287-13291-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
Short summary of fixes pull:
* nouveau: Lockdep workaround
* fbdev/g364fb: Build fix
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230911141915.GA983@linux-uq9g
|
|
Use the correct field to fix wrong voltage range selection on regulators
such as tps6287x since the blamed commit.
Fixes: 269cb04b601d ("regulator: Use bitfield values for range selectors")
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Link: https://lore.kernel.org/r/20230911-regulator-voltage-sel-v1-1-886eb1ade8d8@axis.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Making sure the UCSI debugfs entry actually exists before
attempting to remove it.
Fixes: df0383ffad64 ("usb: typec: ucsi: Add debugfs for ucsi commands")
Reported-by: Dave Hansen <dave.hansen@intel.com>
Closes: https://lore.kernel.org/linux-usb/700df3c4-2f6c-85f9-6c61-065bc5b2db3a@intel.com/
Suggested-by: Dave Hansen <dave.hansen@intel.com>
Suggested-by: Mario Limonciello <mario.limonciello@amd.com>
Cc: Saranya Gopal <saranya.gopal@intel.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: Thorsten Leemhuis <regressions@leemhuis.info>
Link: https://lore.kernel.org/r/20230906084842.1922052-1-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add quirk for ASUS ROG X16 (GV601V, 2023 versions) Flow 2-in-1
to enable tablet mode with lid flip (all screen rotations).
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Link: https://lore.kernel.org/r/20230905082813.13470-1-luke@ljones.dev
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The only probing method supported by the Nvidia SN2201 platform driver
is probing through an ACPI match table. Hence add a dependency on
ACPI, to prevent asking the user about this driver when configuring a
kernel without ACPI support.
Fixes: 662f24826f95 ("platform/mellanox: Add support for new SN2201 system")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Vadim Pasternak <vadimp@nvidia.com>
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/ec5a4071691ab08d58771b7732a9988e89779268.1693828363.git.geert+renesas@glider.be
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The latest version of the mlxbf_bootctl driver utilizes
"sysfs_format_mac", and this API is only available if
NET is defined in the kernel configuration. This patch
changes the mlxbf_bootctl Kconfig to depend on NET.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202309031058.JvwNDBKt-lkp@intel.com/
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David Thompson <davthompson@nvidia.com>
Link: https://lore.kernel.org/r/20230905133243.31550-1-davthompson@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
This fix involves 2 changes:
- All event regs have a reset value of 0, which is not a valid
event_number as per the event_list for most blocks and hence seen
as an error. Add a "disable" event with event_number 0 for all blocks.
- The enable bit for each counter need not be checked before
reading the event info, and hence removed.
Fixes: 1a218d312e65 ("platform/mellanox: mlxbf-pmc: Add Mellanox BlueField PMC driver")
Signed-off-by: Shravan Kumar Ramani <shravankr@nvidia.com>
Reviewed-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: David Thompson <davthompson@nvidia.com>
Link: https://lore.kernel.org/r/04d0213932d32681de1c716b54320ed894e52425.1693917738.git.shravankr@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Replace sprintf with sysfs_emit where possible.
Size check in mlxbf_pmc_event_list_show should account for "\0".
Fixes: 1a218d312e65 ("platform/mellanox: mlxbf-pmc: Add Mellanox BlueField PMC driver")
Signed-off-by: Shravan Kumar Ramani <shravankr@nvidia.com>
Reviewed-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: David Thompson <davthompson@nvidia.com>
Link: https://lore.kernel.org/r/bef39ef32319a31b32f999065911f61b0d3b17c3.1693917738.git.shravankr@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
This commit drops over-sized network packets to avoid tmfifo
queue stuck.
Fixes: 1357dfd7261f ("platform/mellanox: Add TmFifo driver for Mellanox BlueField Soc")
Signed-off-by: Liming Sun <limings@nvidia.com>
Reviewed-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: David Thompson <davthompson@nvidia.com>
Link: https://lore.kernel.org/r/9318936c2447f76db475c985ca6d91f057efcd41.1693322547.git.limings@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
This commit fixes tmfifo console stuck issue when the virtual
networking interface is in down state. In such case, the network
Rx descriptors runs out and causes the Rx network packet staying
in the head of the tmfifo thus blocking the console packets. The
fix is to drop the Rx network packet when no more Rx descriptors.
Function name mlxbf_tmfifo_release_pending_pkt() is also renamed
to mlxbf_tmfifo_release_pkt() to be more approperiate.
Fixes: 1357dfd7261f ("platform/mellanox: Add TmFifo driver for Mellanox BlueField Soc")
Signed-off-by: Liming Sun <limings@nvidia.com>
Reviewed-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: David Thompson <davthompson@nvidia.com>
Link: https://lore.kernel.org/r/8c0177dc938ae03f52ff7e0b62dbeee74b7bec09.1693322547.git.limings@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
MT7988 SoC support 3 NICs. Fix pse_port configuration in
mtk_flow_set_output_device routine if the traffic is offloaded to eth2.
Rely on mtk_pse_port definitions.
Fixes: 88efedf517e6 ("net: ethernet: mtk_eth_soc: enable nft hw flowtable_offload for MT7988 SoC")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Variable dma_addr in function mtk_poll_rx can be uninitialized on
some of the error paths. In practise this doesn't matter, even random
data present in uninitialized stack memory can safely be used in the
way it happens in the error path.
However, in order to make Smatch happy make sure the variable is
always initialized.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Anonymous sets need to be populated once at creation and then they are
bound to rule since 938154b93be8 ("netfilter: nf_tables: reject unbound
anonymous set before commit phase"), otherwise transaction reports
EINVAL.
Userspace does not need to delete elements of anonymous sets that are
not yet bound, reject this with EOPNOTSUPP.
From flush command path, skip anonymous sets, they are expected to be
bound already. Otherwise, EINVAL is hit at the end of this transaction
for unbound sets.
Fixes: 96518518cc41 ("netfilter: add nftables")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Commit d7a74cad8f45 ("xfs: track usage statistics of online fsck")
introduces config XFS_ONLINE_SCRUB_STATS, which selects the non-existing
config FS_DEBUG. It is probably intended to select the existing config
XFS_DEBUG.
Fix the select in config XFS_ONLINE_SCRUB_STATS.
Fixes: d7a74cad8f45 ("xfs: track usage statistics of online fsck")
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
Some firmware (notably U-Boot) provides GetVariable() and
GetNextVariableName() but not QueryVariableInfo().
With commit d86ff3333cb1 ("efivarfs: expose used and total size") the
statfs syscall was broken for such firmware.
If QueryVariableInfo() does not exist or returns EFI_UNSUPPORTED, just
report the file system size as 0 as statfs_simple() previously did.
Fixes: d86ff3333cb1 ("efivarfs: expose used and total size")
Link: https://lore.kernel.org/all/20230910045445.41632-1-heinrich.schuchardt@canonical.com/
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
[ardb: log warning on QueryVariableInfo() failure]
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
syzbot reported a memory leak like below:
BUG: memory leak
unreferenced object 0xffff88810b088c00 (size 240):
comm "syz-executor186", pid 5012, jiffies 4294943306 (age 13.680s)
hex dump (first 32 bytes):
00 89 08 0b 81 88 ff ff 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<ffffffff83e5d5ff>] __alloc_skb+0x1ef/0x230 net/core/skbuff.c:634
[<ffffffff84606e59>] alloc_skb include/linux/skbuff.h:1289 [inline]
[<ffffffff84606e59>] kcm_sendmsg+0x269/0x1050 net/kcm/kcmsock.c:815
[<ffffffff83e479c6>] sock_sendmsg_nosec net/socket.c:725 [inline]
[<ffffffff83e479c6>] sock_sendmsg+0x56/0xb0 net/socket.c:748
[<ffffffff83e47f55>] ____sys_sendmsg+0x365/0x470 net/socket.c:2494
[<ffffffff83e4c389>] ___sys_sendmsg+0xc9/0x130 net/socket.c:2548
[<ffffffff83e4c536>] __sys_sendmsg+0xa6/0x120 net/socket.c:2577
[<ffffffff84ad7bb8>] do_syscall_x64 arch/x86/entry/common.c:50 [inline]
[<ffffffff84ad7bb8>] do_syscall_64+0x38/0xb0 arch/x86/entry/common.c:80
[<ffffffff84c0008b>] entry_SYSCALL_64_after_hwframe+0x63/0xcd
In kcm_sendmsg(), kcm_tx_msg(head)->last_skb is used as a cursor to append
newly allocated skbs to 'head'. If some bytes are copied, an error occurred,
and jumped to out_error label, 'last_skb' is left unmodified. A later
kcm_sendmsg() will use an obsoleted 'last_skb' reference, corrupting the
'head' frag_list and causing the leak.
This patch fixes this issue by properly updating the last allocated skb in
'last_skb'.
Fixes: ab7ac4eb9832 ("kcm: Kernel Connection Multiplexor module")
Reported-and-tested-by: syzbot+6f98de741f7dbbfc4ccb@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=6f98de741f7dbbfc4ccb
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
According to the document of napi, there is no rx process when the
budget is 0. Therefore, r8152_poll() has to return 0 directly when the
budget is equal to 0.
Fixes: d2187f8e4454 ("r8152: divide the tx and rx bottom functions")
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit 0a0e2ea642f6 ("ACPI: processor: Move MWAIT quirk out of
acpi_processor.c") moved the MWAIT quirk code into arch/x86 but left
calls to it in the ACPI PDC processor code that is shared with Itanium,
breaking the latter build.
Since the quirk is specific to a certain x86-based platform, stub out
the function acpi_proc_quirk_mwait_check() when building for ia64.
Fixes: 0a0e2ea642f6 ("ACPI: processor: Move MWAIT quirk out of acpi_processor.c")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Vladimir Oltean says:
====================
Fixes for SJA1105 DSA FDB regressions
A report by Yanan Yang has prompted an investigation into the sja1105
driver's behavior w.r.t. multicast. The report states that when adding
multicast L2 addresses with "bridge mdb add", only the most recently
added address works - the others seem to be overwritten. This is solved
by patch 3/5 (with patch 2/5 as a dependency for it).
Patches 4/5 and 5/5 fix a series of race conditions introduced during
the same patch set as the bug above, namely this one:
https://patchwork.kernel.org/project/netdevbpf/cover/20211024171757.3753288-1-vladimir.oltean@nxp.com/
Finally, patch 1/5 fixes an issue found ever since the introduction of
multicast forwarding offload in sja1105, which is that the multicast
addresses are visible (with the "self" flag) in "bridge fdb show".
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, when we add the first sja1105 port to a bridge with
vlan_filtering 1, then we sometimes see this output:
sja1105 spi2.2: port 4 failed to read back entry for be:79:b4:9e:9e:96 vid 3088: -ENOENT
sja1105 spi2.2: Reset switch and programmed static config. Reason: VLAN filtering
sja1105 spi2.2: port 0 failed to add be:79:b4:9e:9e:96 vid 0 to fdb: -2
It is because sja1105_fdb_add() runs from the dsa_owq which is no longer
serialized with switch resets since it dropped the rtnl_lock() in the
blamed commit.
Either performing the FDB accesses before the reset, or after the reset,
is equally fine, because sja1105_static_fdb_change() backs up those
changes in the static config, but FDB access during reset isn't ok.
Make sja1105_static_config_reload() take the fdb_lock to fix that.
Fixes: 0faf890fc519 ("net: dsa: drop rtnl_lock from dsa_slave_switchdev_event_work")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
sja1105_fdb_add() runs from the dsa_owq, and sja1105_port_mcast_flood()
runs from switchdev_deferred_process_work(). Prior to the blamed commit,
they used to be indirectly serialized through the rtnl_lock(), which
no longer holds true because dsa_owq dropped that.
So, it is now possible that we traverse the static config BLK_IDX_L2_LOOKUP
elements concurrently compared to when we change them, in
sja1105_static_fdb_change(). That is not ideal, since it might result in
data corruption.
Introduce a mutex which serializes accesses to the hardware FDB and to
the static config elements for the L2 Address Lookup table.
I can't find a good reason to add locking around sja1105_fdb_dump().
I'll add it later if needed.
Fixes: 0faf890fc519 ("net: dsa: drop rtnl_lock from dsa_slave_switchdev_event_work")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
entry
The commit cited in Fixes: did 2 things: it refactored the read-back
polling from sja1105_dynamic_config_read() into a new function,
sja1105_dynamic_config_wait_complete(), and it called that from
sja1105_dynamic_config_write() too.
What is problematic is the refactoring.
The refactored code from sja1105_dynamic_config_poll_valid() works like
the previous one, but the problem is that it uses another packed_buf[]
SPI buffer, and there was code at the end of sja1105_dynamic_config_read()
which was relying on the read-back packed_buf[]:
/* Don't dereference possibly NULL pointer - maybe caller
* only wanted to see whether the entry existed or not.
*/
if (entry)
ops->entry_packing(packed_buf, entry, UNPACK);
After the change, the packed_buf[] that this code sees is no longer the
entry read back from hardware, but the original entry that the caller
passed to the sja1105_dynamic_config_read(), packed into this buffer.
This difference is the most notable with the SJA1105_SEARCH uses from
sja1105pqrs_fdb_add() - used for both fdb and mdb. There, we have logic
added by commit 728db843df88 ("net: dsa: sja1105: ignore the FDB entry
for unknown multicast when adding a new address") to figure out whether
the address we're trying to add matches on any existing hardware entry,
with the exception of the catch-all multicast address.
That logic was broken, because with sja1105_dynamic_config_read() not
working properly, it doesn't return us the entry read back from
hardware, but the entry that we passed to it. And, since for multicast,
a match will always exist, it will tell us that any mdb entry already
exists at index=0 L2 Address Lookup table. It is index=0 because the
caller doesn't know the index - it wants to find it out, and
sja1105_dynamic_config_read() does:
if (index < 0) { // SJA1105_SEARCH
/* Avoid copying a signed negative number to an u64 */
cmd.index = 0; // <- this
cmd.search = true;
} else {
cmd.index = index;
cmd.search = false;
}
So, to the caller of sja1105_dynamic_config_read(), the returned info
looks entirely legit, and it will add all mdb entries to FDB index 0.
There, they will always overwrite each other (not to mention,
potentially they can also overwrite a pre-existing bridge fdb entry),
and the user-visible impact will be that only the last mdb entry will be
forwarded as it should. The others won't (will be flooded or dropped,
depending on the egress flood settings).
Fixing is a bit more complicated, and involves either passing the same
packed_buf[] to sja1105_dynamic_config_wait_complete(), or moving all
the extra processing on the packed_buf[] to
sja1105_dynamic_config_wait_complete(). I've opted for the latter,
because it makes sja1105_dynamic_config_wait_complete() a bit more
self-contained.
Fixes: df405910ab9f ("net: dsa: sja1105: wait for dynamic config command completion on writes too")
Reported-by: Yanan Yang <yanan.yang@nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
sja1105_dynamic_config_poll_valid()
Currently, sja1105_dynamic_config_wait_complete() returns either 0 or
-ETIMEDOUT, because it just looks at the read_poll_timeout() return code.
There will be future changes which move some more checks to
sja1105_dynamic_config_poll_valid(). It is important that we propagate
their exact return code (-ENOENT, -EINVAL), because callers of
sja1105_dynamic_config_read() depend on them.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit 4d9423549501 ("net: dsa: sja1105: offload bridge port flags to
device") has partially hidden some multicast entries from showing up in
the "bridge fdb show" output, but it wasn't enough. Addresses which are
added through "bridge mdb add" still show up. Hide them all.
Fixes: 291d1e72b756 ("net: dsa: sja1105: Add support for FDB and MDB management")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, when a new fdb entry is added (with both ports of the
ADIN2111 bridged), the driver configures the MAC filters for the wrong
port, which results in the forwarding being done by the host, and not
actually hardware offloaded.
The ADIN2111 offloads the forwarding by setting filters on the
destination MAC address of incoming frames. Based on these, they may be
routed to the other port. Thus, if a frame has to be forwarded from port
1 to port 2, the required configuration for the ADDR_FILT_UPRn register
should set the APPLY2PORT1 bit (instead of APPLY2PORT2, as it's
currently the case).
Fixes: bc93e19d088b ("net: ethernet: adi: Add ADIN1110 support")
Signed-off-by: Ciprian Regus <ciprian.regus@analog.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Syzbot reports the following uninit-value access problem.
=====================================================
BUG: KMSAN: uninit-value in fill_frame_info net/hsr/hsr_forward.c:601 [inline]
BUG: KMSAN: uninit-value in hsr_forward_skb+0x9bd/0x30f0 net/hsr/hsr_forward.c:616
fill_frame_info net/hsr/hsr_forward.c:601 [inline]
hsr_forward_skb+0x9bd/0x30f0 net/hsr/hsr_forward.c:616
hsr_dev_xmit+0x192/0x330 net/hsr/hsr_device.c:223
__netdev_start_xmit include/linux/netdevice.h:4889 [inline]
netdev_start_xmit include/linux/netdevice.h:4903 [inline]
xmit_one net/core/dev.c:3544 [inline]
dev_hard_start_xmit+0x247/0xa10 net/core/dev.c:3560
__dev_queue_xmit+0x34d0/0x52a0 net/core/dev.c:4340
dev_queue_xmit include/linux/netdevice.h:3082 [inline]
packet_xmit+0x9c/0x6b0 net/packet/af_packet.c:276
packet_snd net/packet/af_packet.c:3087 [inline]
packet_sendmsg+0x8b1d/0x9f30 net/packet/af_packet.c:3119
sock_sendmsg_nosec net/socket.c:730 [inline]
sock_sendmsg net/socket.c:753 [inline]
__sys_sendto+0x781/0xa30 net/socket.c:2176
__do_sys_sendto net/socket.c:2188 [inline]
__se_sys_sendto net/socket.c:2184 [inline]
__ia32_sys_sendto+0x11f/0x1c0 net/socket.c:2184
do_syscall_32_irqs_on arch/x86/entry/common.c:112 [inline]
__do_fast_syscall_32+0xa2/0x100 arch/x86/entry/common.c:178
do_fast_syscall_32+0x37/0x80 arch/x86/entry/common.c:203
do_SYSENTER_32+0x1f/0x30 arch/x86/entry/common.c:246
entry_SYSENTER_compat_after_hwframe+0x70/0x82
Uninit was created at:
slab_post_alloc_hook+0x12f/0xb70 mm/slab.h:767
slab_alloc_node mm/slub.c:3478 [inline]
kmem_cache_alloc_node+0x577/0xa80 mm/slub.c:3523
kmalloc_reserve+0x148/0x470 net/core/skbuff.c:559
__alloc_skb+0x318/0x740 net/core/skbuff.c:644
alloc_skb include/linux/skbuff.h:1286 [inline]
alloc_skb_with_frags+0xc8/0xbd0 net/core/skbuff.c:6299
sock_alloc_send_pskb+0xa80/0xbf0 net/core/sock.c:2794
packet_alloc_skb net/packet/af_packet.c:2936 [inline]
packet_snd net/packet/af_packet.c:3030 [inline]
packet_sendmsg+0x70e8/0x9f30 net/packet/af_packet.c:3119
sock_sendmsg_nosec net/socket.c:730 [inline]
sock_sendmsg net/socket.c:753 [inline]
__sys_sendto+0x781/0xa30 net/socket.c:2176
__do_sys_sendto net/socket.c:2188 [inline]
__se_sys_sendto net/socket.c:2184 [inline]
__ia32_sys_sendto+0x11f/0x1c0 net/socket.c:2184
do_syscall_32_irqs_on arch/x86/entry/common.c:112 [inline]
__do_fast_syscall_32+0xa2/0x100 arch/x86/entry/common.c:178
do_fast_syscall_32+0x37/0x80 arch/x86/entry/common.c:203
do_SYSENTER_32+0x1f/0x30 arch/x86/entry/common.c:246
entry_SYSENTER_compat_after_hwframe+0x70/0x82
It is because VLAN not yet supported in hsr driver. Return error
when protocol is ETH_P_8021Q in fill_frame_info() now to fix it.
Fixes: 451d8123f897 ("net: prp: add packet handling support")
Reported-by: syzbot+bf7e6250c7ce248f3ec9@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=bf7e6250c7ce248f3ec9
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Hangyu Hua says:
====================
Fix possible OOB write when using rule_buf
ADD bounds checks in bcmasp_netfilt_get_all_active and
mvpp2_ethtool_get_rxnfc and mtk_hwlro_get_fdir_all when
using rule_buf from ethtool_get_rxnfc.
v2:
[PATCH v2 1/3]: use -EMSGSIZE instead of truncating the list sliently.
[PATCH v2 3/3]: drop the brackets.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
mtk_hwlro_get_fdir_all()
rule_locs is allocated in ethtool_get_rxnfc and the size is determined by
rule_cnt from user space. So rule_cnt needs to be check before using
rule_locs to avoid NULL pointer dereference.
Fixes: 7aab747e5563 ("net: ethernet: mediatek: add ethtool functions to configure RX flows of HW LRO")
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
rules is allocated in ethtool_get_rxnfc and the size is determined by
rule_cnt from user space. So rule_cnt needs to be check before using
rules to avoid OOB writing or NULL pointer dereference.
Fixes: 90b509b39ac9 ("net: mvpp2: cls: Add Classification offload support")
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Reviewed-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
rule_locs is allocated in ethtool_get_rxnfc and the size is determined by
rule_cnt from user space. So rule_cnt needs to be check before using
rule_locs to avoid OOB writing or NULL pointer dereference.
Fixes: c5d511c49587 ("net: bcmasp: Add support for wake on net filters")
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Setting ethtool -C eth0 tx-usecs 0 is supposed to disable the use of the
coalescing timer but currently it gets programmed with zero delay
instead.
Disable the use of the coalescing timer if tx-usecs is zero by
preventing it from being restarted. Note that to keep things simple we
don't start/stop the timer when the coalescing settings are changed, but
just let that happen on the next transmit or timer expiry.
Fixes: 8fce33317023 ("net: stmmac: Rework coalesce timer and fix multi-queue races")
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Kyril reports that crashkernels fail to work on confidential VMs that
rely on the unaccepted memory table, and this appears to be caused by
the fact that it is not considered part of the set of firmware tables
that the crashkernel needs to map.
This is an oversight, and a result of the use of the EFI_LOADER_DATA
memory type for this table. The correct memory type to use for any
firmware table is EFI_ACPI_RECLAIM_MEMORY (including ones created by the
EFI stub), even though the name suggests that is it specific to ACPI.
ACPI reclaim means that the memory is used by the firmware to expose
information to the operating system, but that the memory region has no
special significance to the firmware itself, and the OS is free to
reclaim the memory and use it as ordinary memory if it is not interested
in the contents, or if it has already consumed them. In Linux, this
memory is never reclaimed, but it is always covered by the kernel direct
map and generally made accessible as ordinary memory.
On x86, ACPI reclaim memory is translated into E820_ACPI, which the
kexec logic already recognizes as memory that the crashkernel may need
to to access, and so it will be mapped and accessible to the booting
crash kernel.
Fixes: 745e3ed85f71 ("efi/libstub: Implement support for unaccepted memory")
Reported-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
CONFIG_EFI_RUNTIME_MAP needs to be enabled in order for kexec to be able
to provide the required information about the EFI runtime mappings to
the incoming kernel, regardless of whether kexec_load() or
kexec_file_load() is being used. Without this information, kexec boot in
EFI mode is not possible.
The CONFIG_EFI_RUNTIME_MAP option is currently directly configurable if
CONFIG_EXPERT is enabled, so that it can be turned on for debugging
purposes even if KEXEC is not enabled. However, the upshot of this is
that it can also be disabled even when it shouldn't.
So tweak the Kconfig declarations to avoid this situation.
Reported-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Only the arch_efi_call_virt() macro that some architectures override
needs to be a macro, given that it is variadic and encapsulates calls
via function pointers that have different prototypes.
The associated setup and teardown code are not special in this regard,
and don't need to be instantiated at each call site. So turn them into
ordinary C functions and move them out of line.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
These variables are never referenced in the code, just remove them.
Signed-off-by: Ding Xiang <dingxiang@cmss.chinamobile.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230908081040.197243-1-dingxiang@cmss.chinamobile.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
snprintf() returns the "number of characters which *would* be generated for
the given input", not the size *really* generated.
In order to avoid too large values for 'o' (and potential negative values
for "sizeof(linebuf) o") use scnprintf() instead of snprintf().
Note that given the "w < 4" in the for loop, the buffer can NOT
overflow, but using the *right* function is always better.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
|
|
In AHCI 1.3.1, the register description for CAP.SSC:
"When cleared to ‘0’, software must not allow the HBA to initiate
transitions to the Slumber state via agressive link power management nor
the PxCMD.ICC field in each port, and the PxSCTL.IPM field in each port
must be programmed to disallow device initiated Slumber requests."
In AHCI 1.3.1, the register description for CAP.PSC:
"When cleared to ‘0’, software must not allow the HBA to initiate
transitions to the Partial state via agressive link power management nor
the PxCMD.ICC field in each port, and the PxSCTL.IPM field in each port
must be programmed to disallow device initiated Partial requests."
Ensure that we always set the corresponding bits in PxSCTL.IPM, such that
a device is not allowed to initiate transitions to power states which are
unsupported by the HBA.
DevSleep is always initiated by the HBA, however, for completeness, set the
corresponding bit in PxSCTL.IPM such that agressive link power management
cannot transition to DevSleep if DevSleep is not supported.
sata_link_scr_lpm() is used by libahci, ata_piix and libata-pmp.
However, only libahci has the ability to read the CAP/CAP2 register to see
if these features are supported. Therefore, in order to not introduce any
regressions on ata_piix or libata-pmp, create flags that indicate that the
respective feature is NOT supported. This way, the behavior for ata_piix
and libata-pmp should remain unchanged.
This change is based on a patch originally submitted by Runa Guo-oc.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Fixes: 1152b2617a6e ("libata: implement sata_link_scr_lpm() and make ata_dev_set_feature() global")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
|
|
As explained in errata sheet, in section "2.14.5 Truncation of SPI output
signals after EOT event":
On STM32MP1x, EOT interrupt can be thrown before the true end of
communication.
So we add a delay of a half period to wait the real end of the
transmission.
Link: https://www.st.com/resource/en/errata_sheet/es0539-stm32mp131x3x5x-device-errata-stmicroelectronics.pdf
Signed-off-by: Valentin Caron <valentin.caron@foss.st.com>
Link: https://lore.kernel.org/r/20230906132735.748174-1-valentin.caron@foss.st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Reset the FLSHxCR1 registers to default value. ROM may set the register
value and it affects the SPI NAND normal functions.
Signed-off-by: Han Xu <han.xu@nxp.com>
Link: https://lore.kernel.org/r/20230906183254.235847-1-han.xu@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Signed-off-by: Walt Holman <waltholman09@gmail.com>
Link: https://lore.kernel.org/r/20230910185433.13677-1-waltholman09@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Commit ac950278b087 ("ASoC: add N cpus to M codecs dai link support")
added an additional local params in __soc_pcm_hw_params, for the CPU
side of the DAI. The snd_pcm_hw_params struct is pretty large (604
bytes) and keeping two local copies of it can make the stack frame
really large.
It is worth noting the variables are in separate code blocks so for
some optimisation levels in the compiler these will get automatically
combined keeping the stack frame reasonable. But better to manually
combine them to cover all cases.
Add a single local variable for __soc_pcm_hw_params and use in both
loops to shrink the stack frame.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230908085920.2906359-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Commit 422f10adc3eb ("ASoC: wm8960: Add support for the power supplies")
added regulator support to the wm8960 driver, but neglected to update
error handling in the probe function. This results in warning backtraces
if the probe function fails.
Fixes: 422f10adc3eb ("ASoC: wm8960: Add support for the power supplies")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Fabio Estevam <festevam@denx.de>
Link: https://lore.kernel.org/r/20230909120237.2646275-1-linux@roeck-us.net
Signed-off-by: Mark Brown <broonie@kernel.org>
|
