| Age | Commit message (Collapse) | Author |
|---|
|
2 recent commits:
cfae58ed681c ("platform/x86: intel-vbtn: Only blacklist SW_TABLET_MODE
on the 9 / "Laptop" chasis-type")
1fac39fd0316 ("platform/x86: intel-vbtn: Also handle tablet-mode switch on
"Detachable" and "Portable" chassis-types")
Enabled reporting of SW_TABLET_MODE on more devices since the vbtn ACPI
interface is used by the firmware on some of those devices to report this.
Testing has shown that unconditionally enabling SW_TABLET_MODE reporting
on all devices with a chassis type of 8 ("Portable") or 10 ("Notebook")
which support the VGBS method is a very bad idea.
Many of these devices are normal laptops (non 2-in-1) models with a VGBS
which always returns 0, which we translate to SW_TABLET_MODE=1. This in
turn causes userspace (libinput) to suppress events from the builtin
keyboard and touchpad, making the laptop essentially unusable.
Since the problem of wrongly reporting SW_TABLET_MODE=1 in combination
with libinput, leads to a non-usable system. Where as OTOH many people will
not even notice when SW_TABLET_MODE is not being reported, this commit
changes intel_vbtn_has_switches() to use a DMI based allow-list.
The new DMI based allow-list matches on the 31 ("Convertible") and
32 ("Detachable") chassis-types, as these clearly are 2-in-1s and
so far if they support the intel-vbtn ACPI interface they all have
properly working SW_TABLET_MODE reporting.
Besides these 2 generic matches, it also contains model specific matches
for 2-in-1 models which use a different chassis-type and which are known
to have properly working SW_TABLET_MODE reporting.
This has been tested on the following 2-in-1 devices:
Dell Venue 11 Pro 7130 vPro
HP Pavilion X2 10-p002nd
HP Stream x360 Convertible PC 11
Medion E1239T
Fixes: cfae58ed681c ("platform/x86: intel-vbtn: Only blacklist SW_TABLET_MODE on the 9 / "Laptop" chasis-type")
BugLink: https://forum.manjaro.org/t/keyboard-and-touchpad-only-work-on-kernel-5-6/22668
BugLink: https://bugzilla.opensuse.org/show_bug.cgi?id=1175599
Cc: Barnabás Pőcze <pobrn@protonmail.com>
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
the HP Pavilion 11 x360"
After discussion, see the Link tag, it appears that this is not good enough.
So, revert it now and apply a better fix.
This reverts commit d823346876a970522ff9e4d2b323c9b734dcc4de.
Link: https://lore.kernel.org/platform-driver-x86/s5hft71klxl.wl-tiwai@suse.de/
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Building linux-next with JUMP_LABEL=n and KASAN=y, I got this objtool
warning:
arch/x86/lib/copy_mc.o: warning: objtool: copy_mc_to_user()+0x22: call to
__kasan_check_read() with UACCESS enabled
What happens here is that copy_mc_to_user() branches on a static key in a
UACCESS region:
__uaccess_begin();
if (static_branch_unlikely(©_mc_fragile_key))
ret = copy_mc_fragile(to, from, len);
ret = copy_mc_generic(to, from, len);
__uaccess_end();
and the !CONFIG_JUMP_LABEL version of static_branch_unlikely() uses
static_key_enabled(), which uses static_key_count(), which uses
atomic_read(), which calls instrument_atomic_read(), which uses
kasan_check_read(), which is __kasan_check_read().
Let's permit these KASAN helpers in UACCESS regions - static keys should
probably work under UACCESS, I think.
PeterZ adds:
It's not a matter of permitting, it's a matter of being safe and
correct. In this case it is, because it's a thin wrapper around
check_memory_region() which was already marked safe.
check_memory_region() is correct because the only thing it ends up
calling is kasa_report() and that is also marked safe because that is
annotated with user_access_save/restore() before it does anything else.
On top of that, all of KASAN is noinstr, so nothing in here will end up
in tracing and/or call schedule() before the user_access_save().
Signed-off-by: Jann Horn <jannh@google.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
|
|
separate statements
Replace commas with semicolons. What is done is essentially described by
the following Coccinelle semantic patch (http://coccinelle.lip6.fr/):
// <smpl>
@@ expression e1,e2; @@
e1
-,
+;
e2
... when any
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/1601233948-11629-17-git-send-email-Julia.Lawall@inria.fr
|
|
Update them according with the current support on drivers.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
There are two different variants for Hauppauge WinTV MiniCard:
[SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD] = {
.name = "Hauppauge WinTV MiniCard",
.type = SMS_NOVA_B0,
.fw[DEVICE_MODE_DVBT_BDA] = SMS_FW_DVBT_HCW_55XXX,
.default_mode = DEVICE_MODE_DVBT_BDA,
.lna_ctrl = 29,
.board_cfg.foreign_lna0_ctrl = 29,
.rf_switch = 17,
.board_cfg.rf_switch_uhf = 17,
},
[SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD_R2] = {
.name = "Hauppauge WinTV MiniCard Rev 2",
.type = SMS_NOVA_B0,
.fw[DEVICE_MODE_DVBT_BDA] = SMS_FW_DVBT_HCW_55XXX,
.default_mode = DEVICE_MODE_DVBT_BDA,
.lna_ctrl = -1,
},
As it can be seen, the RF part of the definitions are different.
So, better to use different names in order to distinguish
between them.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The zoran revert patch misplaced the Zoran doc file. Move it to
the right place.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Add userspace support for the Memory Tagging Extension introduced by
Armv8.5.
(Catalin Marinas and others)
* for-next/mte: (30 commits)
arm64: mte: Fix typo in memory tagging ABI documentation
arm64: mte: Add Memory Tagging Extension documentation
arm64: mte: Kconfig entry
arm64: mte: Save tags when hibernating
arm64: mte: Enable swap of tagged pages
mm: Add arch hooks for saving/restoring tags
fs: Handle intra-page faults in copy_mount_options()
arm64: mte: ptrace: Add NT_ARM_TAGGED_ADDR_CTRL regset
arm64: mte: ptrace: Add PTRACE_{PEEK,POKE}MTETAGS support
arm64: mte: Allow {set,get}_tagged_addr_ctrl() on non-current tasks
arm64: mte: Restore the GCR_EL1 register after a suspend
arm64: mte: Allow user control of the generated random tags via prctl()
arm64: mte: Allow user control of the tag check mode via prctl()
mm: Allow arm64 mmap(PROT_MTE) on RAM-based files
arm64: mte: Validate the PROT_MTE request via arch_validate_flags()
mm: Introduce arch_validate_flags()
arm64: mte: Add PROT_MTE support to mmap() and mprotect()
mm: Introduce arch_calc_vm_flag_bits()
arm64: mte: Tags-aware aware memcmp_pages() implementation
arm64: Avoid unnecessary clear_user_page() indirection
...
|
|
Fix and subsequently rewrite Spectre mitigations, including the addition
of support for PR_SPEC_DISABLE_NOEXEC.
(Will Deacon and Marc Zyngier)
* for-next/ghostbusters: (22 commits)
arm64: Add support for PR_SPEC_DISABLE_NOEXEC prctl() option
arm64: Pull in task_stack_page() to Spectre-v4 mitigation code
KVM: arm64: Allow patching EL2 vectors even with KASLR is not enabled
arm64: Get rid of arm64_ssbd_state
KVM: arm64: Convert ARCH_WORKAROUND_2 to arm64_get_spectre_v4_state()
KVM: arm64: Get rid of kvm_arm_have_ssbd()
KVM: arm64: Simplify handling of ARCH_WORKAROUND_2
arm64: Rewrite Spectre-v4 mitigation code
arm64: Move SSBD prctl() handler alongside other spectre mitigation code
arm64: Rename ARM64_SSBD to ARM64_SPECTRE_V4
arm64: Treat SSBS as a non-strict system feature
arm64: Group start_thread() functions together
KVM: arm64: Set CSV2 for guests on hardware unaffected by Spectre-v2
arm64: Rewrite Spectre-v2 mitigation code
arm64: Introduce separate file for spectre mitigations and reporting
arm64: Rename ARM64_HARDEN_BRANCH_PREDICTOR to ARM64_SPECTRE_V2
KVM: arm64: Simplify install_bp_hardening_cb()
KVM: arm64: Replace CONFIG_KVM_INDIRECT_VECTORS with CONFIG_RANDOMIZE_BASE
arm64: Remove Spectre-related CONFIG_* options
arm64: Run ARCH_WORKAROUND_2 enabling code on all CPUs
...
|
|
'for-next/cpuinfo', 'for-next/fpsimd', 'for-next/misc', 'for-next/mm', 'for-next/pci', 'for-next/perf', 'for-next/ptrauth', 'for-next/sdei', 'for-next/selftests', 'for-next/stacktrace', 'for-next/svm', 'for-next/topology', 'for-next/tpyos' and 'for-next/vdso' into for-next/core
Remove unused functions and parameters from ACPI IORT code.
(Zenghui Yu via Lorenzo Pieralisi)
* for-next/acpi:
ACPI/IORT: Remove the unused inline functions
ACPI/IORT: Drop the unused @ops of iort_add_device_replay()
Remove redundant code and fix documentation of caching behaviour for the
HVC_SOFT_RESTART hypercall.
(Pingfan Liu)
* for-next/boot:
Documentation/kvm/arm: improve description of HVC_SOFT_RESTART
arm64/relocate_kernel: remove redundant code
Improve reporting of unexpected kernel traps due to BPF JIT failure.
(Will Deacon)
* for-next/bpf:
arm64: Improve diagnostics when trapping BRK with FAULT_BRK_IMM
Improve robustness of user-visible HWCAP strings and their corresponding
numerical constants.
(Anshuman Khandual)
* for-next/cpuinfo:
arm64/cpuinfo: Define HWCAP name arrays per their actual bit definitions
Cleanups to handling of SVE and FPSIMD register state in preparation
for potential future optimisation of handling across syscalls.
(Julien Grall)
* for-next/fpsimd:
arm64/sve: Implement a helper to load SVE registers from FPSIMD state
arm64/sve: Implement a helper to flush SVE registers
arm64/fpsimdmacros: Allow the macro "for" to be used in more cases
arm64/fpsimdmacros: Introduce a macro to update ZCR_EL1.LEN
arm64/signal: Update the comment in preserve_sve_context
arm64/fpsimd: Update documentation of do_sve_acc
Miscellaneous changes.
(Tian Tao and others)
* for-next/misc:
arm64/mm: return cpu_all_mask when node is NUMA_NO_NODE
arm64: mm: Fix missing-prototypes in pageattr.c
arm64/fpsimd: Fix missing-prototypes in fpsimd.c
arm64: hibernate: Remove unused including <linux/version.h>
arm64/mm: Refactor {pgd, pud, pmd, pte}_ERROR()
arm64: Remove the unused include statements
arm64: get rid of TEXT_OFFSET
arm64: traps: Add str of description to panic() in die()
Memory management updates and cleanups.
(Anshuman Khandual and others)
* for-next/mm:
arm64: dbm: Invalidate local TLB when setting TCR_EL1.HD
arm64: mm: Make flush_tlb_fix_spurious_fault() a no-op
arm64/mm: Unify CONT_PMD_SHIFT
arm64/mm: Unify CONT_PTE_SHIFT
arm64/mm: Remove CONT_RANGE_OFFSET
arm64/mm: Enable THP migration
arm64/mm: Change THP helpers to comply with generic MM semantics
arm64/mm/ptdump: Add address markers for BPF regions
Allow prefetchable PCI BARs to be exposed to userspace using normal
non-cacheable mappings.
(Clint Sbisa)
* for-next/pci:
arm64: Enable PCI write-combine resources under sysfs
Perf/PMU driver updates.
(Julien Thierry and others)
* for-next/perf:
perf: arm-cmn: Fix conversion specifiers for node type
perf: arm-cmn: Fix unsigned comparison to less than zero
arm_pmu: arm64: Use NMIs for PMU
arm_pmu: Introduce pmu_irq_ops
KVM: arm64: pmu: Make overflow handler NMI safe
arm64: perf: Defer irq_work to IPI_IRQ_WORK
arm64: perf: Remove PMU locking
arm64: perf: Avoid PMXEV* indirection
arm64: perf: Add missing ISB in armv8pmu_enable_counter()
perf: Add Arm CMN-600 PMU driver
perf: Add Arm CMN-600 DT binding
arm64: perf: Add support caps under sysfs
drivers/perf: thunderx2_pmu: Fix memory resource error handling
drivers/perf: xgene_pmu: Fix uninitialized resource struct
perf: arm_dsu: Support DSU ACPI devices
arm64: perf: Remove unnecessary event_idx check
drivers/perf: hisi: Add missing include of linux/module.h
arm64: perf: Add general hardware LLC events for PMUv3
Support for the Armv8.3 Pointer Authentication enhancements.
(By Amit Daniel Kachhap)
* for-next/ptrauth:
arm64: kprobe: clarify the comment of steppable hint instructions
arm64: kprobe: disable probe of fault prone ptrauth instruction
arm64: cpufeature: Modify address authentication cpufeature to exact
arm64: ptrauth: Introduce Armv8.3 pointer authentication enhancements
arm64: traps: Allow force_signal_inject to pass esr error code
arm64: kprobe: add checks for ARMv8.3-PAuth combined instructions
Tonnes of cleanup to the SDEI driver.
(Gavin Shan)
* for-next/sdei:
firmware: arm_sdei: Remove _sdei_event_unregister()
firmware: arm_sdei: Remove _sdei_event_register()
firmware: arm_sdei: Introduce sdei_do_local_call()
firmware: arm_sdei: Cleanup on cross call function
firmware: arm_sdei: Remove while loop in sdei_event_unregister()
firmware: arm_sdei: Remove while loop in sdei_event_register()
firmware: arm_sdei: Remove redundant error message in sdei_probe()
firmware: arm_sdei: Remove duplicate check in sdei_get_conduit()
firmware: arm_sdei: Unregister driver on error in sdei_init()
firmware: arm_sdei: Avoid nested statements in sdei_init()
firmware: arm_sdei: Retrieve event number from event instance
firmware: arm_sdei: Common block for failing path in sdei_event_create()
firmware: arm_sdei: Remove sdei_is_err()
Selftests for Pointer Authentication and FPSIMD/SVE context-switching.
(Mark Brown and Boyan Karatotev)
* for-next/selftests:
selftests: arm64: Add build and documentation for FP tests
selftests: arm64: Add wrapper scripts for stress tests
selftests: arm64: Add utility to set SVE vector lengths
selftests: arm64: Add stress tests for FPSMID and SVE context switching
selftests: arm64: Add test for the SVE ptrace interface
selftests: arm64: Test case for enumeration of SVE vector lengths
kselftests/arm64: add PAuth tests for single threaded consistency and differently initialized keys
kselftests/arm64: add PAuth test for whether exec() changes keys
kselftests/arm64: add nop checks for PAuth tests
kselftests/arm64: add a basic Pointer Authentication test
Implementation of ARCH_STACKWALK for unwinding.
(Mark Brown)
* for-next/stacktrace:
arm64: Move console stack display code to stacktrace.c
arm64: stacktrace: Convert to ARCH_STACKWALK
arm64: stacktrace: Make stack walk callback consistent with generic code
stacktrace: Remove reliable argument from arch_stack_walk() callback
Support for ASID pinning, which is required when sharing page-tables with
the SMMU.
(Jean-Philippe Brucker)
* for-next/svm:
arm64: cpufeature: Export symbol read_sanitised_ftr_reg()
arm64: mm: Pin down ASIDs for sharing mm with devices
Rely on firmware tables for establishing CPU topology.
(Valentin Schneider)
* for-next/topology:
arm64: topology: Stop using MPIDR for topology information
Spelling fixes.
(Xiaoming Ni and Yanfei Xu)
* for-next/tpyos:
arm64/numa: Fix a typo in comment of arm64_numa_init
arm64: fix some spelling mistakes in the comments by codespell
vDSO cleanups.
(Will Deacon)
* for-next/vdso:
arm64: vdso: Fix unusual formatting in *setup_additional_pages()
arm64: vdso32: Remove a bunch of #ifdef CONFIG_COMPAT_VDSO guards
|
|
Printing "Bad RIP value" if copy_code() fails can be misleading for
userspace pointers, since copy_code() can fail if the instruction
pointer is valid but the code is paged out. This is because copy_code()
calls copy_from_user_nmi() for userspace pointers, which disables page
fault handling.
This is reproducible in OOM situations, where it's plausible that the
code may be reclaimed in the time between entry into the kernel and when
this message is printed. This leaves a misleading log in dmesg that
suggests instruction pointer corruption has occurred, which may alarm
users.
Change the message to state the error condition more precisely.
[ bp: Massage a bit. ]
Signed-off-by: Mark Mossberg <mark.mossberg@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20201002042915.403558-1-mark.mossberg@gmail.com
|
|
Nathan reports that building the new mokvar table code for 32-bit
ARM fails with errors such as
error: implicit declaration of function 'early_memunmap'
error: implicit declaration of function 'early_memremap'
This is caused by the lack of an explicit #include of the appropriate
header, and ARM apparently does not inherit that inclusion via another
header file. So add the #include.
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Replace commas with semicolons. What is done is essentially described by
the following Coccinelle semantic patch (http://coccinelle.lip6.fr/):
// <smpl>
@@ expression e1,e2; @@
e1
-,
+;
e2
... when any
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Replace commas with semicolons. What is done is essentially described by
the following Coccinelle semantic patch (http://coccinelle.lip6.fr/):
// <smpl>
@@ expression e1,e2; @@
e1
-,
+;
e2
... when any
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Replace commas with semicolons. What is done is essentially described by
the following Coccinelle semantic patch (http://coccinelle.lip6.fr/):
// <smpl>
@@ expression e1,e2; @@
e1
-,
+;
e2
... when any
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Replace commas with semicolons. What is done is essentially described by
the following Coccinelle semantic patch (http://coccinelle.lip6.fr/):
// <smpl>
@@ expression e1,e2; @@
e1
-,
+;
e2
... when any
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Replace commas with semicolons. What is done is essentially described by
the following Coccinelle semantic patch (http://coccinelle.lip6.fr/):
// <smpl>
@@ expression e1,e2; @@
e1
-,
+;
e2
... when any
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Currently, we use the jiffies counter as a time source, by staring at
it until a HZ period elapses, and then staring at it again and perform
as many XOR operations as we can at the same time until another HZ
period elapses, so that we can calculate the throughput. This takes
longer than necessary, and depends on HZ, which is undesirable, since
HZ is system dependent.
Let's use the ktime interface instead, and use it to time a fixed
number of XOR operations, which can be done much faster, and makes
the time spent depend on the performance level of the system itself,
which is much more reasonable. To ensure that we have the resolution
we need even on systems with 32 kHz time sources, while not spending too
much time in the benchmark on a slow CPU, let's switch to 3 attempts of
800 repetitions each: that way, we will only misidentify algorithms that
perform within 10% of each other as the fastest if they are faster than
10 GB/s to begin with, which is not expected to occur on systems with
such coarse clocks.
On ThunderX2, I get the following results:
Before:
[72625.956765] xor: measuring software checksum speed
[72625.993104] 8regs : 10169.000 MB/sec
[72626.033099] 32regs : 12050.000 MB/sec
[72626.073095] arm64_neon: 11100.000 MB/sec
[72626.073097] xor: using function: 32regs (12050.000 MB/sec)
After:
[72599.650216] xor: measuring software checksum speed
[72599.651188] 8regs : 10491 MB/sec
[72599.652006] 32regs : 12345 MB/sec
[72599.652871] arm64_neon : 11402 MB/sec
[72599.652873] xor: using function: 32regs (12345 MB/sec)
Link: https://lore.kernel.org/linux-crypto/20200923182230.22715-3-ardb@kernel.org/
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Currently, the XOR module performs its boot time benchmark at core
initcall time when it is built-in, to ensure that the RAID code can
make use of it when it is built-in as well.
Let's defer this to a later stage during the boot, to avoid impacting
the overall boot time of the system. Instead, just pick an arbitrary
implementation from the list, and use that as the preliminary default.
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The 'qm->curr_qm_qp_num' is not initialized, which will result in failure
to write the current_q file.
Signed-off-by: Sihang Chen <chensihang1@hisilicon.com>
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
As before, when the ZIP device is too busy to creat a request, it will
return '-EBUSY'. But the crypto process think the '-EBUSY' means a
successful request and wait for its completion.
So replace '-EBUSY' with '-EAGAIN' to show crypto this request is failed.
Fixes: 62c455ca853e("crypto: hisilicon - add HiSilicon ZIP...")
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The zero length input will cause a call trace when use GZIP
decompress like this:
Unable to handle kernel paging request at virtual address
...
lr : get_gzip_head_size+0x7c/0xd0 [hisi_zip]
Judge the input length and return '-EINVAL' when input is invalid.
Fixes: 62c455ca853e("crypto: hisilicon - add HiSilicon ZIP...")
Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
ZIP debug registers aren't cleared even if its driver is removed,
so add a clearing operation when remove driver.
Signed-off-by: Hao Fang <fanghao11@huawei.com>
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch removes a number of unused variables and marks others
as unused in order to silence compiler warnings about them.
Fixes: a8ea8bdd9df9 ("lib/mpi: Extend the MPI library")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Tested-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch removes a few ineffectual assignments from the function
crypto_poly1305_setdctxkey.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Modify the read size to the correct HW random
registers size, 8bit.
The incorrect read size caused and faulty
HW random value.
Signed-off-by: Tomer Maimon <tmaimon77@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Make sure that we call the dma_unmap_sg on the correct scatterlist on
completion with the correct sg_nents.
Use sg_table to managed the DMA mapping and at the same time add the needed
dma_sync calls for the sg_table.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Newer CAAM versions (Era 9+) support 16B IVs. Since for these devices
the HW limitation is no longer present newer version should process the
requests containing 16B IVs directly in hardware without using a fallback.
Signed-off-by: Andrei Botila <andrei.botila@nxp.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Newer CAAM versions (Era 9+) support 16B IVs. Since for these devices
the HW limitation is no longer present newer version should process the
requests containing 16B IVs directly in hardware without using a fallback.
Signed-off-by: Andrei Botila <andrei.botila@nxp.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Newer CAAM versions (Era 9+) support 16B IVs. Since for these devices
the HW limitation is no longer present newer version should process the
requests containing 16B IVs directly in hardware without using a fallback.
Signed-off-by: Andrei Botila <andrei.botila@nxp.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
XTS should not return succes when dealing with block length equal to zero.
This is different than the rest of the skcipher algorithms.
Fixes: 31bb2f0da1b50 ("crypto: caam - check zero-length input")
Cc: <stable@vger.kernel.org> # v5.4+
Signed-off-by: Andrei Botila <andrei.botila@nxp.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
CAAM accelerator only supports XTS-AES-128 and XTS-AES-256 since
it adheres strictly to the standard. All the other key lengths
are accepted and processed through a fallback as long as they pass
the xts_verify_key() checks.
Fixes: 226853ac3ebe ("crypto: caam/qi2 - add skcipher algorithms")
Cc: <stable@vger.kernel.org> # v4.20+
Signed-off-by: Andrei Botila <andrei.botila@nxp.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
CAAM accelerator only supports XTS-AES-128 and XTS-AES-256 since
it adheres strictly to the standard. All the other key lengths
are accepted and processed through a fallback as long as they pass
the xts_verify_key() checks.
Fixes: b189817cf789 ("crypto: caam/qi - add ablkcipher and authenc algorithms")
Cc: <stable@vger.kernel.org> # v4.12+
Signed-off-by: Andrei Botila <andrei.botila@nxp.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
CAAM accelerator only supports XTS-AES-128 and XTS-AES-256 since
it adheres strictly to the standard. All the other key lengths
are accepted and processed through a fallback as long as they pass
the xts_verify_key() checks.
Fixes: c6415a6016bf ("crypto: caam - add support for acipher xts(aes)")
Cc: <stable@vger.kernel.org> # v4.4+
Signed-off-by: Andrei Botila <andrei.botila@nxp.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
A hardware limitation exists for CAAM until Era 9 which restricts
the accelerator to IVs with only 8 bytes. When CAAM has a lower era
a fallback is necessary to process 16 bytes IV.
Fixes: 226853ac3ebe ("crypto: caam/qi2 - add skcipher algorithms")
Cc: <stable@vger.kernel.org> # v4.20+
Signed-off-by: Andrei Botila <andrei.botila@nxp.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
A hardware limitation exists for CAAM until Era 9 which restricts
the accelerator to IVs with only 8 bytes. When CAAM has a lower era
a fallback is necessary to process 16 bytes IV.
Fixes: b189817cf789 ("crypto: caam/qi - add ablkcipher and authenc algorithms")
Cc: <stable@vger.kernel.org> # v4.12+
Signed-off-by: Andrei Botila <andrei.botila@nxp.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
A hardware limitation exists for CAAM until Era 9 which restricts
the accelerator to IVs with only 8 bytes. When CAAM has a lower era
a fallback is necessary to process 16 bytes IV.
Fixes: c6415a6016bf ("crypto: caam - add support for acipher xts(aes)")
Cc: <stable@vger.kernel.org> # v4.4+
Signed-off-by: Andrei Botila <andrei.botila@nxp.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Simplify the return expression.
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
create_sysfs_eng_grps_info()
Simplify the return expression.
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Fix resource leak in error handling.
Signed-off-by: Pavel Machek (CIP) <pavel@denx.de>
Acked-by: John Allen <john.allen@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Simplify the return expression.
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The pipe splice code still used the old model of waiting for pipe IO by
using a non-specific "pipe_wait()" that waited for any pipe event to
happen, which depended on all pipe IO being entirely serialized by the
pipe lock. So by checking the state you were waiting for, and then
adding yourself to the wait queue before dropping the lock, you were
guaranteed to see all the wakeups.
Strictly speaking, the actual wakeups were not done under the lock, but
the pipe_wait() model still worked, because since the waiter held the
lock when checking whether it should sleep, it would always see the
current state, and the wakeup was always done after updating the state.
However, commit 0ddad21d3e99 ("pipe: use exclusive waits when reading or
writing") split the single wait-queue into two, and in the process also
made the "wait for event" code wait for _two_ wait queues, and that then
showed a race with the wakers that were not serialized by the pipe lock.
It's only splice that used that "pipe_wait()" model, so the problem
wasn't obvious, but Josef Bacik reports:
"I hit a hang with fstest btrfs/187, which does a btrfs send into
/dev/null. This works by creating a pipe, the write side is given to
the kernel to write into, and the read side is handed to a thread that
splices into a file, in this case /dev/null.
The box that was hung had the write side stuck here [pipe_write] and
the read side stuck here [splice_from_pipe_next -> pipe_wait].
[ more details about pipe_wait() scenario ]
The problem is we're doing the prepare_to_wait, which sets our state
each time, however we can be woken up either with reads or writes. In
the case above we race with the WRITER waking us up, and re-set our
state to INTERRUPTIBLE, and thus never break out of schedule"
Josef had a patch that avoided the issue in pipe_wait() by just making
it set the state only once, but the deeper problem is that pipe_wait()
depends on a level of synchonization by the pipe mutex that it really
shouldn't. And the whole "wait for any pipe state change" model really
isn't very good to begin with.
So rather than trying to work around things in pipe_wait(), remove that
legacy model of "wait for arbitrary pipe event" entirely, and actually
create functions that wait for the pipe actually being readable or
writable, and can do so without depending on the pipe lock serializing
everything.
Fixes: 0ddad21d3e99 ("pipe: use exclusive waits when reading or writing")
Link: https://lore.kernel.org/linux-fsdevel/bfa88b5ad6f069b2b679316b9e495a970130416c.1601567868.git.josef@toxicpanda.com/
Reported-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-and-tested-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
from Chuanhong Guo <gch981213@gmail.com>:
"program" mode on this controller can trigger up to 56 bits of data
shifting. During the operation, data in PRGDATA[0-5] will be
shifted out from MOSI, and data from MISO will be continuously filling
SHREG[0-9].
Currently this mode is used to implement transfer_one_message for 6-byte
full-duplex transfer, but it can execute a transfer for up-to 7 bytes
as long as the last byte is read only.
transfer_one_message is expected to perform full-duplex transfer,
instead of transfer with specific format. mtk_nor_spi_mem_prg is
added here to use this extra byte.
Newer version of this controller can trigger longer data shifting with
shift bytes more than PRGDATA_MAX + SHREG_MAX. This patch is implemented
with that in mind and it checks against both SHREG_MAX and PRG_CNT_MAX
for future support of new controllers.
Patch 3/3 is a fix for:
commit a59b2c7c56bf7 ("spi: spi-mtk-nor: support standard spi properties")
which breaks supports_op logic. But it can't be separated as it depends
on patch 2/3. Fortuantely the broken commit isn't in stable yet.
Chuanhong Guo (3):
spi: spi-mtk-nor: make use of full capability of prg mode
spi: spi-mtk-nor: add helper for checking prg mode ops
spi: spi-mtk-nor: fix op checks in supports_op
drivers/spi/spi-mtk-nor.c | 179 +++++++++++++++++++++++++++++++++-----
1 file changed, 158 insertions(+), 21 deletions(-)
--
2.26.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
|
|
Running in hardIRQ, disabling IRQ is redundant.
Signed-off-by: Barry Song <song.bao.hua@hisilicon.com>
Link: https://lore.kernel.org/r/20200926001616.21292-2-song.bao.hua@hisilicon.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Running in hardIRQ, disabling IRQ is redundant.
Signed-off-by: Barry Song <song.bao.hua@hisilicon.com>
Link: https://lore.kernel.org/r/20200926001616.21292-1-song.bao.hua@hisilicon.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This patch implements the reporting of the effectively used speed_hz for
the transfer by setting xfer->effective_speed_hz.
See the following patch, which adds this feature to the SPI core for more
information:
commit 5d7e2b5ed585 ("spi: core: allow reporting the effectivly used speed_hz for a transfer")
Signed-off-by: Thomas Kopp <thomas.kopp@microchip.com>
Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Link: https://lore.kernel.org/r/20200921071036.2091-1-thomas.kopp@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
commit a59b2c7c56bf7 ("spi: spi-mtk-nor: support standard spi properties")
tries to inverse the logic of supports_op when adding
spi_mem_default_supports_op check, but it didn't get it done properly.
There are two regressions introduced by this commit:
1. reading ops supported by program mode is rejected.
2. all ops with special controller routines are incorrectly further
checked against program mode.
This commits inverses the logic back:
1. check spi_mem_default_supports_op and reject unsupported ops first.
2. return true for ops with special controller routines.
3. check the left ops against controller program mode.
Fixes: a59b2c7c56bf7 ("spi: spi-mtk-nor: support standard spi properties")
Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
Link: https://lore.kernel.org/r/20200924152730.733243-4-gch981213@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
op checking/resizing logic for the newly added mtk_nor_spi_mem_prg is
more complicated. Add two helper functions for them:
mtk_nor_match_prg: check whether an op is supported by prg mode.
mtk_nor_adj_prg_size: adjust data size for mtk_nor_spi_mem_prg.
mtk_nor_match_prg isn't called yet because supports_op is currently
broken. It'll be used in the next fix commit.
Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
Link: https://lore.kernel.org/r/20200924152730.733243-3-gch981213@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
"program" mode on this controller can trigger up to 56 bits of data
shifting. During the operation, data in PRGDATA[0-5] will be
shifted out from MOSI, and data from MISO will be continuously filling
SHREG[0-9].
Currently this mode is used to implement transfer_one_message for 6-byte
full-duplex transfer, but it can execute a transfer for up-to 7 bytes
as long as the last byte is read only.
transfer_one_message is expected to perform full-duplex transfer,
instead of transfer with specific format. mtk_nor_spi_mem_prg is
added here to use this extra byte.
Newer version of this controller can trigger longer data shifting with
shift bytes more than PRGDATA_MAX + SHREG_MAX. This patch is implemented
with that in mind and it checks against both SHREG_MAX and PRG_CNT_MAX
for future support of new controllers.
Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
Link: https://lore.kernel.org/r/20200924152730.733243-2-gch981213@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The node type field is an enum type, so print it as a 32-bit quantity
rather than as an unsigned short.
Link: https://lore.kernel.org/r/202009302350.QIzfkx62-lkp@intel.com
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
