| Age | Commit message (Collapse) | Author |
|---|
|
CZ.NIC's Turris devices are based on Marvell EBU SoCs. Hence add a
dependency on ARCH_MVEBU, to prevent asking the user about these drivers
when configuring a kernel that cannot run on an affected CZ.NIC Turris
system.
Fixes: 992f1a3d4e88498d ("platform: cznic: Add preliminary support for Turris Omnia MCU")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The i.MX System Controller Management Interface firmware is only present
on Freescale i.MX SoCs. Hence add a dependency on ARCH_MXC, to prevent
asking the user about this driver when configuring a kernel without
Freescale i.MX platform support.
Fixes: 514b2262ade48a05 ("firmware: arm_scmi: Fix i.MX build dependency")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into HEAD
TI K3 defconfig fixes for v6.14
- Enable TISCI Interrupt Router, Interrupt Aggregator and related drivers.
* tag 'ti-k3-config-fixes-for-v6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux:
arm64: defconfig: Enable TISCI Interrupt Router and Aggregator
Link: https://lore.kernel.org/r/20250212112857.pm6ptaqbx545qnv7@eternity
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Sven and I have agreed to share the maintainership for the ARM/APPLE
platform after Marcan's step down. I'm handling the downstream Asahi
Linux tree since April 2024 and worked on or wrote several drivers for
the platform.
Signed-off-by: Janne Grunau <j@jannau.net>
Acked-by: Sven Peter <sven@svenpeter.dev>
Acked-by: Hector Martin <marcan@marcan.st>
Acked-by: Neal Gompa <neal@gompa.dev>
Link: https://lore.kernel.org/r/20250208-maint-soc-apple-v1-1-a7f7337baec0@jannau.net
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
From discussion in [1] and in-person with Joel, flip my entry from R:
to M:.
Link: https://lore.kernel.org/all/CACPK8Xe8yZLXzEQPp=1D2f0TsKA7hBZG=pHHW6U51FMpp_BiRQ@mail.gmail.com/ [1]
Cc: Joel Stanley <joel@jms.id.au>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: soc@lists.linux.dev
Cc: linux-aspeed@lists.ozlabs.org
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Acked-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into HEAD
Fixes for the IOMMU used together with the PCIe controllers on rk3588,
some board-level fixes for wrong pins, pinctrl and regulators, and
disabling DMA on a board where the DMA+uart causes the dma controller to
hang, as well as improved network stability for the OrangePi R1.
* tag 'v6.14-rockchip-dtsfixes1' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: adjust SMMU interrupt type on rk3588
arm64: dts: rockchip: disable IOMMU when running rk3588 in PCIe endpoint mode
dt-bindings: rockchip: pmu: Ensure all properties are defined
arm64: dts: rockchip: Fix lcdpwr_en pin for Cool Pi GenBook
arm64: dts: rockchip: fix fixed-regulator renames on rk3399-gru devices
arm64: dts: rockchip: Disable DMA for uart5 on px30-ringneck
arm64: dts: rockchip: Move uart5 pin configuration to px30 ringneck SoM
arm64: dts: rockchip: change eth phy mode to rgmii-id for orangepi r1 plus lts
arm64: dts: rockchip: Fix broken tsadc pinctrl names for rk3588
Link: https://lore.kernel.org/r/3004814.3ZeAukHxDK@diego
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
As defined in the specification, the `controls` field in the configuration
space is only valid/present if VIRTIO_SND_F_CTLS is negotiated.
From https://docs.oasis-open.org/virtio/virtio/v1.3/virtio-v1.3.html:
5.14.4 Device Configuration Layout
...
controls
(driver-read-only) indicates a total number of all available control
elements if VIRTIO_SND_F_CTLS has been negotiated.
Let's use the same style used in virtio_blk.h to clarify this and to avoid
confusion as happened in QEMU (see link).
Link: https://gitlab.com/qemu-project/qemu/-/issues/2805
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250213161825.139952-1-sgarzare@redhat.com
|
|
In commit 3eab9d7bc2f4 ("fuse: convert readahead to use folios"), the
logic was converted to using the new folio readahead code, which drops
the reference on the folio once it is locked, using an inferred
reference on the folio. Previously we held a reference on the folio for
the entire duration of the readpages call.
This is fine, however for the case for splice pipe responses where we
will remove the old folio and splice in the new folio (see
fuse_try_move_page()), we assume that there is a reference held on the
folio for ap->folios, which is no longer the case.
To fix this, revert back to __readahead_folio() which allows us to hold
the reference on the folio for the duration of readpages until either we
drop the reference ourselves in fuse_readpages_end() or the reference is
dropped after it's replaced in the page cache in the splice case.
This will fix the UAF bug that was reported.
Link: https://lore.kernel.org/linux-fsdevel/2f681f48-00f5-4e09-8431-2b3dbfaa881e@heusel.eu/
Fixes: 3eab9d7bc2f4 ("fuse: convert readahead to use folios")
Reported-by: Christian Heusel <christian@heusel.eu>
Closes: https://lore.kernel.org/all/2f681f48-00f5-4e09-8431-2b3dbfaa881e@heusel.eu/
Closes: https://gitlab.archlinux.org/archlinux/packaging/packages/linux/-/issues/110
Reported-by: Mantas Mikulėnas <grawity@gmail.com>
Closes: https://lore.kernel.org/all/34feb867-09e2-46e4-aa31-d9660a806d1a@gmail.com/
Closes: https://bugzilla.opensuse.org/show_bug.cgi?id=1236660
Cc: <stable@vger.kernel.org> # v6.13
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
When flushing the serial port's buffer, uart_flush_buffer() calls
kfifo_reset() but if there is an outstanding DMA transfer then the
completion function will consume data from the kfifo via
uart_xmit_advance(), underflowing and leading to ongoing DMA as the
driver tries to transmit another 2^32 bytes.
This is readily reproduced with serial-generic and amidi sending even
short messages as closing the device on exit will wait for the fifo to
drain and in the underflow case amidi hangs for 30 seconds on exit in
tty_wait_until_sent(). A trace of that gives:
kworker/1:1-84 [001] 51.769423: bprint: serial8250_tx_dma: tx_size=3 fifo_len=3
amidi-763 [001] 51.769460: bprint: uart_flush_buffer: resetting fifo
irq/21-fe530000-76 [000] 51.769474: bprint: __dma_tx_complete: tx_size=3
irq/21-fe530000-76 [000] 51.769479: bprint: serial8250_tx_dma: tx_size=4096 fifo_len=4294967293
irq/21-fe530000-76 [000] 51.781295: bprint: __dma_tx_complete: tx_size=4096
irq/21-fe530000-76 [000] 51.781301: bprint: serial8250_tx_dma: tx_size=4096 fifo_len=4294963197
irq/21-fe530000-76 [000] 51.793131: bprint: __dma_tx_complete: tx_size=4096
irq/21-fe530000-76 [000] 51.793135: bprint: serial8250_tx_dma: tx_size=4096 fifo_len=4294959101
irq/21-fe530000-76 [000] 51.804949: bprint: __dma_tx_complete: tx_size=4096
Since the port lock is held in when the kfifo is reset in
uart_flush_buffer() and in __dma_tx_complete(), adding a flush_buffer
hook to adjust the outstanding DMA byte count is sufficient to avoid the
kfifo underflow.
Fixes: 9ee4b83e51f74 ("serial: 8250: Add support for dmaengine")
Cc: stable <stable@kernel.org>
Signed-off-by: John Keeping <jkeeping@inmusicbrands.com>
Link: https://lore.kernel.org/r/20250208124148.1189191-1-jkeeping@inmusicbrands.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix the brand new xfstest that tries to swapon on a recently unshared
file and use the chance to document the other bit of magic in this
function.
The big comment is taken from a mailinglist post by Dave Chinner.
Fixes: 5e672cd69f0a53 ("xfs: introduce xfs_inodegc_push()")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
Match the method name and the naming convention or address_space
operations.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
Mounting a filesystem that requires quota state changing will generate a
transaction.
We already check for a read-only device; we should do that for
norecovery too.
A quotacheck on a norecovery mount, and with the right log size, will cause
the mount process to hang on:
[<0>] xlog_grant_head_wait+0x5d/0x2a0 [xfs]
[<0>] xlog_grant_head_check+0x112/0x180 [xfs]
[<0>] xfs_log_reserve+0xe3/0x260 [xfs]
[<0>] xfs_trans_reserve+0x179/0x250 [xfs]
[<0>] xfs_trans_alloc+0x101/0x260 [xfs]
[<0>] xfs_sync_sb+0x3f/0x80 [xfs]
[<0>] xfs_qm_mount_quotas+0xe3/0x2f0 [xfs]
[<0>] xfs_mountfs+0x7ad/0xc20 [xfs]
[<0>] xfs_fs_fill_super+0x762/0xa50 [xfs]
[<0>] get_tree_bdev_flags+0x131/0x1d0
[<0>] vfs_get_tree+0x26/0xd0
[<0>] vfs_cmd_create+0x59/0xe0
[<0>] __do_sys_fsconfig+0x4e3/0x6b0
[<0>] do_syscall_64+0x82/0x160
[<0>] entry_SYSCALL_64_after_hwframe+0x76/0x7e
This is caused by a transaction running with bogus initialized head/tail
I initially hit this while running generic/050, with random log
sizes, but I managed to reproduce it reliably here with the steps
below:
mkfs.xfs -f -lsize=1025M -f -b size=4096 -m crc=1,reflink=1,rmapbt=1, -i
sparse=1 /dev/vdb2 > /dev/null
mount -o usrquota,grpquota,prjquota /dev/vdb2 /mnt
xfs_io -x -c 'shutdown -f' /mnt
umount /mnt
mount -o ro,norecovery,usrquota,grpquota,prjquota /dev/vdb2 /mnt
Last mount hangs up
As we add yet another validation if quota state is changing, this also
add a new helper named xfs_qm_validate_state_change(), factoring the
quota state changes out of xfs_qm_newmount() to reduce cluttering
within it.
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
If there is corrutpion on the filesystem andxfs_repair
fails to repair it. The last resort of getting the data
is to use norecovery,ro mount. But if the NEEDSREPAIR is
set the filesystem cannot be mounted. The flag must be
cleared out manually using xfs_db, to get access to what
left over of the corrupted fs.
Signed-off-by: Lukas Herbolt <lukas@herbolt.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
Coverity noticed that xrep_dinode_bad_metabt_fork never runs because
XFS_DINODE_FMT_META_BTREE is always filtered out in the mode selection
switch of xrep_dinode_check_dfork.
Metadata btrees are allowed only in the data forks of regular files, so
add this case explicitly. I guess this got fubard during a refactoring
prior to 6.13 and I didn't notice until now. :/
Coverity-id: 1617714
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
I received a report from the release engineering side of the house that
xfs_scrub without the -n flag (aka fix it mode) would try to fix a
broken filesystem even on a kernel that doesn't have online repair built
into it:
# xfs_scrub -dTvn /mnt/test
EXPERIMENTAL xfs_scrub program in use! Use at your own risk!
Phase 1: Find filesystem geometry.
/mnt/test: using 1 threads to scrub.
Phase 1: Memory used: 132k/0k (108k/25k), time: 0.00/ 0.00/ 0.00s
<snip>
Phase 4: Repair filesystem.
<snip>
Info: /mnt/test/some/victimdir directory entries: Attempting repair. (repair.c line 351)
Corruption: /mnt/test/some/victimdir directory entries: Repair unsuccessful; offline repair required. (repair.c line 204)
Source: https://blogs.oracle.com/linux/post/xfs-online-filesystem-repair
It is strange that xfs_scrub doesn't refuse to run, because the kernel
is supposed to return EOPNOTSUPP if we actually needed to run a repair,
and xfs_io's repair subcommand will perror that. And yet:
# xfs_io -x -c 'repair probe' /mnt/test
#
The first problem is commit dcb660f9222fd9 (4.15) which should have had
xchk_probe set the CORRUPT OFLAG so that any of the repair machinery
will get called at all.
It turns out that some refactoring that happened in the 6.6-6.8 era
broke the operation of this corner case. What we *really* want to
happen is that all the predicates that would steer xfs_scrub_metadata()
towards calling xrep_attempt() should function the same way that they do
when repair is compiled in; and then xrep_attempt gets to return the
fatal EOPNOTSUPP error code that causes the probe to fail.
Instead, commit 8336a64eb75cba (6.6) started the failwhale swimming by
hoisting OFLAG checking logic into a helper whose non-repair stub always
returns false, causing scrub to return "repair not needed" when in fact
the repair is not supported. Prior to that commit, the oflag checking
that was open-coded in scrub.c worked correctly.
Similarly, in commit 4bdfd7d15747b1 (6.8) we hoisted the IFLAG_REPAIR
and ALREADY_FIXED logic into a helper whose non-repair stub always
returns false, so we never enter the if test body that would have called
xrep_attempt, let alone fail to decode the OFLAGs correctly.
The final insult (yes, we're doing The Naked Gun now) is commit
48a72f60861f79 (6.8) in which we hoisted the "are we going to try a
repair?" predicate into yet another function with a non-repair stub
always returns false.
Fix xchk_probe to trigger xrep_probe if repair is enabled, or return
EOPNOTSUPP directly if it is not. For all the other scrub types, we
need to fix the header predicates so that the ->repair functions (which
are all xrep_notsupported) get called to return EOPNOTSUPP. Commit
48a72 is tagged here because the scrub code prior to LTS 6.12 are
incomplete and not worth patching.
Reported-by: David Flynn <david.flynn@oracle.com>
Cc: <stable@vger.kernel.org> # v6.8
Fixes: 8336a64eb75c ("xfs: don't complain about unfixed metadata when repairs were injected")
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
As PD2.0 spec ("6.5.6.2 PSSourceOffTimer")，the PSSourceOffTimer is
used by the Policy Engine in Dual-Role Power device that is currently
acting as a Sink to timeout on a PS_RDY Message during a Power Role
Swap sequence. This condition leads to a Hard Reset for USB Type-A and
Type-B Plugs and Error Recovery for Type-C plugs and return to USB
Default Operation.
Therefore, after PSSourceOffTimer timeout, the tcpm state machine should
switch from PR_SWAP_SNK_SRC_SINK_OFF to ERROR_RECOVERY. This can also
solve the test items in the USB power delivery compliance test:
TEST.PD.PROT.SNK.12 PR_Swap – PSSourceOffTimer Timeout
[1] https://usb.org/document-library/usb-power-delivery-compliance-test-specification-0/USB_PD3_CTS_Q4_2025_OR.zip
Fixes: f0690a25a140 ("staging: typec: USB Type-C Port Manager (tcpm)")
Cc: stable <stable@kernel.org>
Signed-off-by: Jos Wang <joswang@lenovo.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Tested-by: Amit Sunil Dhamne <amitsd@google.com>
Link: https://lore.kernel.org/r/20250213134921.3798-1-joswang1221@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The role switch registration and set_role() can happen in parallel as they
are invoked independent of each other. There is a possibility that a driver
might spend significant amount of time in usb_role_switch_register() API
due to the presence of time intensive operations like component_add()
which operate under common mutex. This leads to a time window after
allocating the switch and before setting the registered flag where the set
role notifications are dropped. Below timeline summarizes this behavior
Thread1 | Thread2
usb_role_switch_register() |
| |
---> allocate switch |
| |
---> component_add() | usb_role_switch_set_role()
| | |
| | --> Drop role notifications
| | since sw->registered
| | flag is not set.
| |
--->Set registered flag.|
To avoid this, set the registered flag early on in the switch register
API.
Fixes: b787a3e78175 ("usb: roles: don't get/set_role() when usb_role_switch is unregistered")
Cc: stable <stable@kernel.org>
Signed-off-by: Elson Roy Serrao <quic_eserrao@quicinc.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20250206193950.22421-1-quic_eserrao@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The behaviour of kthread_create_worker() was recently changed to align
with the one of kthread_create(). The kthread worker is created but not
awaken by default. This is to allow the use of kthread_affine_preferred()
and kthread_bind[_mask]() with kthread workers. In order to keep the
old behaviour and wake the kthread up, kthread_run_worker() must be
used. All the pre-existing users have been converted, except for UVC
that was introduced in the same merge window as the API change.
This results in hangs:
INFO: task UVCG:82 blocked for more than 491 seconds.
Tainted: G T 6.13.0-rc2-00014-gb04e317b5226 #1
task:UVCG state:D stack:0 pid:82
Call Trace:
__schedule
schedule
schedule_preempt_disabled
kthread
? kthread_flush_work
ret_from_fork
ret_from_fork_asm
entry_INT80_32
Fix this with converting UVCG kworker to the new API.
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202502121025.55bfa801-lkp@intel.com
Fixes: f0bbfbd16b3b ("usb: gadget: uvc: rework to enqueue in pump worker from encoded queue")
Cc: stable <stable@kernel.org>
Cc: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20250212135514.30539-1-frederic@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Teclast disk used on Huawei hisi platforms doesn't work well,
losing connectivity intermittently if LPM is enabled.
Add quirk disable LPM to resolve the issue.
Signed-off-by: Lei Huang <huanglei@kylinos.cn>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20250212093829.7379-1-huanglei814@163.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
device_del() can lead to new work being scheduled in gadget->work
workqueue. This is observed, for example, with the dwc3 driver with the
following call stack:
device_del()
gadget_unbind_driver()
usb_gadget_disconnect_locked()
dwc3_gadget_pullup()
dwc3_gadget_soft_disconnect()
usb_gadget_set_state()
schedule_work(&gadget->work)
Move flush_work() after device_del() to ensure the workqueue is cleaned
up.
Fixes: 5702f75375aa9 ("usb: gadget: udc-core: move sysfs_notify() to a workqueue")
Cc: stable <stable@kernel.org>
Signed-off-by: Roy Luo <royluo@google.com>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Reviewed-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20250204233642.666991-1-royluo@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When using USB MIDI, a lock is attempted to be acquired twice through a
re-entrant call to f_midi_transmit, causing a deadlock.
Fix it by using queue_work() to schedule the inner f_midi_transmit() via
a high priority work queue from the completion handler.
Link: https://lore.kernel.org/all/CAArt=LjxU0fUZOj06X+5tkeGT+6RbXzpWg1h4t4Fwa_KGVAX6g@mail.gmail.com/
Fixes: d5daf49b58661 ("USB: gadget: midi: add midi function driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Jill Donahue <jilliandonahue58@gmail.com>
Link: https://lore.kernel.org/r/20250211174805.1369265-1-jdonahue@fender.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When usb_control_msg is used in the get_bMaxPacketSize0 function, the
USB pipe does not include the endpoint device number. This can cause
failures when a usb hub port is reinitialized after encountering a bad
cable connection. As a result, the system logs the following error
messages:
usb usb2-port1: cannot reset (err = -32)
usb usb2-port1: Cannot enable. Maybe the USB cable is bad?
usb usb2-port1: attempt power cycle
usb 2-1: new high-speed USB device number 5 using ci_hdrc
usb 2-1: device descriptor read/8, error -71
The problem began after commit 85d07c556216 ("USB: core: Unite old
scheme and new scheme descriptor reads"). There
usb_get_device_descriptor was replaced with get_bMaxPacketSize0. Unlike
usb_get_device_descriptor, the get_bMaxPacketSize0 function uses the
macro usb_rcvaddr0pipe, which does not include the endpoint device
number. usb_get_device_descriptor, on the other hand, used the macro
usb_rcvctrlpipe, which includes the endpoint device number.
By modifying the get_bMaxPacketSize0 function to use usb_rcvctrlpipe
instead of usb_rcvaddr0pipe, the issue can be resolved. This change will
ensure that the endpoint device number is included in the USB pipe,
preventing reinitialization failures. If the endpoint has not set the
device number yet, it will still work because the device number is 0 in
udev.
Cc: stable <stable@kernel.org>
Fixes: 85d07c556216 ("USB: core: Unite old scheme and new scheme descriptor reads")
Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20250203105840.17539-1-eichest@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
There is a frequent timeout during controller enter/exit from halt state
after toggling the run_stop bit by SW. This timeout occurs when
performing frequent role switches between host and device, causing
device enumeration issues due to the timeout. This issue was not present
when USB2 suspend PHY was disabled by passing the SNPS quirks
(snps,dis_u2_susphy_quirk and snps,dis_enblslpm_quirk) from the DTS.
However, there is a requirement to enable USB2 suspend PHY by setting of
GUSB2PHYCFG.ENBLSLPM and GUSB2PHYCFG.SUSPHY bits when controller starts
in gadget or host mode results in the timeout issue.
This commit addresses this timeout issue by ensuring that the bits
GUSB2PHYCFG.ENBLSLPM and GUSB2PHYCFG.SUSPHY are cleared before starting
the dwc3_gadget_run_stop sequence and restoring them after the
dwc3_gadget_run_stop sequence is completed.
Fixes: 72246da40f37 ("usb: Introduce DesignWare USB3 DRD Driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Selvarasu Ganesan <selvarasu.g@samsung.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20250201163903.459-1-selvarasu.g@samsung.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Building the test creates binaries 'wait-pipe' and
'sandbox-and-launch' which need to be gitignore'd.
Signed-off-by: Bharadwaj Raju <bharadwaj.raju777@gmail.com>
Link: https://lore.kernel.org/r/20250210161101.6024-1-bharadwaj.raju777@gmail.com
[mic: Sort entries]
Signed-off-by: Mickaël Salaün <mic@digikod.net>
|
|
Extend protocol fixture with test suits for MPTCP protocol.
Add CONFIG_MPTCP and CONFIG_MPTCP_IPV6 options in config.
Signed-off-by: Mikhail Ivanov <ivanov.mikhail1@huawei-partners.com>
Link: https://lore.kernel.org/r/20250205093651.1424339-4-ivanov.mikhail1@huawei-partners.com
Cc: <stable@vger.kernel.org> # 6.7.x
Signed-off-by: Mickaël Salaün <mic@digikod.net>
|
|
Extend protocol_variant structure with protocol field (Cf. socket(2)).
Extend protocol fixture with TCP test suits with protocol=IPPROTO_TCP
which can be used as an alias for IPPROTO_IP (=0) in socket(2).
Signed-off-by: Mikhail Ivanov <ivanov.mikhail1@huawei-partners.com>
Link: https://lore.kernel.org/r/20250205093651.1424339-3-ivanov.mikhail1@huawei-partners.com
Cc: <stable@vger.kernel.org> # 6.7.x
Signed-off-by: Mickaël Salaün <mic@digikod.net>
|
|
Use sk_is_tcp() to check if socket is TCP in bind(2) and connect(2)
hooks.
SMC, MPTCP, SCTP protocols are currently restricted by TCP access
rights. The purpose of TCP access rights is to provide control over
ports that can be used by userland to establish a TCP connection.
Therefore, it is incorrect to deny bind(2) and connect(2) requests for a
socket of another protocol.
However, SMC, MPTCP and RDS implementations use TCP internal sockets to
establish communication or even to exchange packets over a TCP
connection [1]. Landlock rules that configure bind(2) and connect(2)
usage for TCP sockets should not cover requests for sockets of such
protocols. These protocols have different set of security issues and
security properties, therefore, it is necessary to provide the userland
with the ability to distinguish between them (eg. [2]).
Control over TCP connection used by other protocols can be achieved with
upcoming support of socket creation control [3].
[1] https://lore.kernel.org/all/62336067-18c2-3493-d0ec-6dd6a6d3a1b5@huawei-partners.com/
[2] https://lore.kernel.org/all/20241204.fahVio7eicim@digikod.net/
[3] https://lore.kernel.org/all/20240904104824.1844082-1-ivanov.mikhail1@huawei-partners.com/
Closes: https://github.com/landlock-lsm/linux/issues/40
Fixes: fff69fb03dde ("landlock: Support network rules with TCP bind and connect")
Signed-off-by: Mikhail Ivanov <ivanov.mikhail1@huawei-partners.com>
Link: https://lore.kernel.org/r/20250205093651.1424339-2-ivanov.mikhail1@huawei-partners.com
[mic: Format commit message to 72 columns]
Signed-off-by: Mickaël Salaün <mic@digikod.net>
|
|
* Fix some whitespace, punctuation and minor grammar.
* Add a missing sentence about the minimum ABI version,
to stay in line with the section next to it.
Cc: Tahera Fahimi <fahimitahera@gmail.com>
Cc: Tanya Agarwal <tanyaagarwal25699@gmail.com>
Signed-off-by: Günther Noack <gnoack@google.com>
Link: https://lore.kernel.org/r/20250124154445.162841-1-gnoack@google.com
[mic: Add newlines, update doc date]
Signed-off-by: Mickaël Salaün <mic@digikod.net>
|
|
Fix grammar error in comments that were identified using the codespell
tool.
Signed-off-by: Tanya Agarwal <tanyaagarwal25699@gmail.com>
Reviewed-by: Günther Noack <gnoack@google.com>
Link: https://lore.kernel.org/r/20250123194208.2660-1-tanyaagarwal25699@gmail.com
[mic: Simplify commit message]
Signed-off-by: Mickaël Salaün <mic@digikod.net>
|
|
Since commit 5155cbcdbf03 ("af_unix: Add a prompt to
CONFIG_AF_UNIX_OOB"), the Landlock selftests's configuration is not
enough to build a minimal kernel. Because scoped_signal_test checks
with the MSG_OOB flag, we need to enable CONFIG_AF_UNIX_OOB for tests:
# RUN fown.no_sandbox.sigurg_socket ...
# scoped_signal_test.c:420:sigurg_socket:Expected 1 (1) == send(client_socket, ".", 1, MSG_OOB) (-1)
# sigurg_socket: Test terminated by assertion
# FAIL fown.no_sandbox.sigurg_socket
...
Cc: Günther Noack <gnoack@google.com>
Acked-by: Florent Revest <revest@chromium.org>
Link: https://lore.kernel.org/r/20250211132531.1625566-1-mic@digikod.net
Signed-off-by: Mickaël Salaün <mic@digikod.net>
|
|
The fastboot tool for communicating with Android bootloaders does not
work reliably with this device if USB 2 Link Power Management (LPM)
is enabled.
Various fastboot commands are affected, including the
following, which usually reproduces the problem within two tries:
fastboot getvar kernel
getvar:kernel FAILED (remote: 'GetVar Variable Not found')
This issue was hidden on many systems up until commit 63a1f8454962
("xhci: stored cached port capability values in one place") as the xhci
driver failed to detect USB 2 LPM support if USB 3 ports were listed
before USB 2 ports in the "supported protocol capabilities".
Adding the quirk resolves the issue. No drawbacks are expected since
the device uses different USB product IDs outside of fastboot mode, and
since fastboot commands worked before, until LPM was enabled on the
tested system by the aforementioned commit.
Based on a patch from Forest <forestix@nom.one> from which most of the
code and commit message is taken.
Cc: stable <stable@kernel.org>
Reported-by: Forest <forestix@nom.one>
Closes: https://lore.kernel.org/hk8umj9lv4l4qguftdq1luqtdrpa1gks5l@sonic.net
Tested-by: Forest <forestix@nom.one>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250206151836.51742-1-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add Renesas R-Car D3 USB Download mode quirk and update comments
on all the other Renesas R-Car USB Download mode quirks to discern
them from each other. This follows R-Car Series, 3rd Generation
reference manual Rev.2.00 chapter 19.2.8 USB download mode .
Fixes: 6d853c9e4104 ("usb: cdc-acm: Add DISABLE_ECHO for Renesas USB Download mode")
Cc: stable <stable@kernel.org>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20250209145708.106914-1-marek.vasut+renesas@mailbox.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
If we receive an initial fragment of size 8 bytes which specifies a wLength
of 1 byte (so the reassembled message is supposed to be 9 bytes long), and
we then receive a second fragment of size 9 bytes (which is not supposed to
happen), we currently wrongly bypass the fragment reassembly code but still
pass the pointer to the acm->notification_buffer to
acm_process_notification().
Make this less wrong by always going through fragment reassembly when we
expect more fragments.
Before this patch, receiving an overlong fragment could lead to `newctrl`
in acm_process_notification() being uninitialized data (instead of data
coming from the device).
Cc: stable <stable@kernel.org>
Fixes: ea2583529cd1 ("cdc-acm: reassemble fragmented notifications")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
If the first fragment is shorter than struct usb_cdc_notification, we can't
calculate an expected_size. Log an error and discard the notification
instead of reading lengths from memory outside the received data, which can
lead to memory corruption when the expected_size decreases between
fragments, causing `expected_size - acm->nb_index` to wrap.
This issue has been present since the beginning of git history; however,
it only leads to memory corruption since commit ea2583529cd1
("cdc-acm: reassemble fragmented notifications").
A mitigating factor is that acm_ctrl_irq() can only execute after userspace
has opened /dev/ttyACM*; but if ModemManager is running, ModemManager will
do that automatically depending on the USB device's vendor/product IDs and
its other interfaces.
Cc: stable <stable@kernel.org>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Some Renesas HCs require firmware upload to work, this is handled by the
xhci_pci_renesas driver. Other variants of those chips load firmware from
a SPI flash and are ready to work with xhci_pci alone.
A refactor merged in v6.12 broke the latter configuration so that users
are finding their hardware ignored by the normal driver and are forced to
enable the firmware loader which isn't really necessary on their systems.
Let xhci_pci work with those chips as before when the firmware loader is
disabled by kernel configuration.
Fixes: 25f51b76f90f ("xhci-pci: Make xhci-pci-renesas a proper modular driver")
Cc: stable <stable@kernel.org>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219616
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219726
Signed-off-by: Michal Pecio <michal.pecio@gmail.com>
Tested-by: Nicolai Buchwitz <nb@tipi-net.de>
Link: https://lore.kernel.org/r/20250128104529.58a79bfc@foxbook
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
LS7A EHCI controller doesn't have extended capabilities, so the EECP
(EHCI Extended Capabilities Pointer) field of HCCPARAMS register should
be 0x0, but it reads as 0xa0 now. This is a hardware flaw and will be
fixed in future, now just clear the EECP field to avoid error messages
on boot:
......
[ 0.581675] pci 0000:00:04.1: EHCI: unrecognized capability ff
[ 0.581699] pci 0000:00:04.1: EHCI: unrecognized capability ff
[ 0.581716] pci 0000:00:04.1: EHCI: unrecognized capability ff
[ 0.581851] pci 0000:00:04.1: EHCI: unrecognized capability ff
......
[ 0.581916] pci 0000:00:05.1: EHCI: unrecognized capability ff
[ 0.581951] pci 0000:00:05.1: EHCI: unrecognized capability ff
[ 0.582704] pci 0000:00:05.1: EHCI: unrecognized capability ff
[ 0.582799] pci 0000:00:05.1: EHCI: unrecognized capability ff
......
Cc: stable <stable@kernel.org>
Signed-off-by: Baoqi Zhang <zhangbaoqi@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Link: https://lore.kernel.org/r/20250202124935.480500-1-chenhuacai@loongson.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This driver supports page faults on PCI RID since commit <9f831c16c69e>
("iommu/vt-d: Remove the pasid present check in prq_event_thread") by
allowing the reporting of page faults with the pasid_present field cleared
to the upper layer for further handling. The fundamental assumption here
is that the detach or replace operations act as a fence for page faults.
This implies that all pending page faults associated with a specific RID
or PASID are flushed when a domain is detached or replaced from a device
RID or PASID.
However, the intel_iommu_drain_pasid_prq() helper does not correctly
handle faults for RID. This leads to faults potentially remaining pending
in the iommu hardware queue even after the domain is detached, thereby
violating the aforementioned assumption.
Fix this issue by extending intel_iommu_drain_pasid_prq() to cover faults
for RID.
Fixes: 9f831c16c69e ("iommu/vt-d: Remove the pasid present check in prq_event_thread")
Cc: stable@vger.kernel.org
Suggested-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20250121023150.815972-1-baolu.lu@linux.intel.com
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20250211005512.985563-2-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
There are some typos in comments/messages:
- modyfying -> modifying
- Unabled -> Unable
Fix them via codespell.
Signed-off-by: Andrew Kreimer <algonell@gmail.com>
Link: https://lore.kernel.org/r/20250210112027.29791-1-algonell@gmail.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Fix spelling error IDENITY -> IDENTITY in
drivers/iommu/iommu.c.
Signed-off-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20250128190522.70800-1-eahariha@linux.microsoft.com
[ joro: Add commit message ]
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
With recent kernel, AMDGPU failed to resume after suspend on certain laptop.
Sample log:
-----------
Nov 14 11:52:19 Thinkbook kernel: iommu ivhd0: AMD-Vi: Event logged [ILLEGAL_DEV_TABLE_ENTRY device=0000:06:00.0 pasid=0x00000 address=0x135300000 flags=0x0080]
Nov 14 11:52:19 Thinkbook kernel: AMD-Vi: DTE[0]: 7d90000000000003
Nov 14 11:52:19 Thinkbook kernel: AMD-Vi: DTE[1]: 0000100103fc0009
Nov 14 11:52:19 Thinkbook kernel: AMD-Vi: DTE[2]: 2000000117840013
Nov 14 11:52:19 Thinkbook kernel: AMD-Vi: DTE[3]: 0000000000000000
This is because in resume path, CNTRL[EPHEn] is not set. Fix this by
setting CNTRL[EPHEn] to 1 in resume path if EFR[EPHSUP] is set.
Note
May be better approach is to save the control register in suspend path
and restore it in resume path instead of trying to set indivisual
bits. We will have separate patch for that.
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219499
Fixes: c4cb23111103 ("iommu/amd: Add support for enable/disable IOPF")
Tested-by: Hamish McIntyre-Bhatty <kernel-bugzilla@regd.hamishmb.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20250127094411.5931-1-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
snd_hda_create_dig_out_ctls()
Check the return value of snd_ctl_rename_id() in
snd_hda_create_dig_out_ctls(). Ensure that failures
are properly handled.
[ Note: the error cannot happen practically because the only error
condition in snd_ctl_rename_id() is the missing ID, but this is a
rename, hence it must be present. But for the code consistency,
it's safer to have always the proper return check -- tiwai ]
Fixes: 5c219a340850 ("ALSA: hda: Fix kctl->id initialization")
Cc: stable@vger.kernel.org # 6.4+
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Link: https://patch.msgid.link/20250213074543.1620-1-vulab@iscas.ac.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Correct wrong mask for device index.
Signed-off-by: Baojun Xu <baojun.xu@ti.com>
Fixes: bb5f86ea50ff ("ALSA: hda/tas2781: Add tas2781 hda SPI driver")
Link: https://patch.msgid.link/20250214013021.6072-1-baojun.xu@ti.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.14
More fixes and deviec quirks, most of them driver specific including a
few SOF robustness fixes. Nothing super remarkable individually.
|
|
Pull drm fixes from Dave Airlie:
"Weekly drm fixes pull request, nothing too unusual, the hdmi tests
needs a bit of refactoring after lockdep shouted at them, otherwise
amdgpu and xe lead and a few misc otherwise.
amdgpu:
- Fix shutdown regression on old APUs
- Fix compute queue hang on gfx9 APUs
- Fix possible invalid access in PSP failure path
- Avoid possible buffer overflow in pptable override
amdkfd:
- Properly free gang bo in failure path
- GFX12 trap handler fix
i915:
- selftest fix: avoid using uninitialized context
xe:
- Remove bo->clients out of bos_lock area
- Carve out wopcm portion from the stolen memory
tests:
- fix lockdep with hdmi infrastructure tests
host1x:
- fix uninitialised mutex usage
panthor:
- fix uninit variable
hibmc:
- fix missing Kconfig select"
* tag 'drm-fixes-2025-02-14' of https://gitlab.freedesktop.org/drm/kernel:
drm: Fix DSC BPP increment decoding
drm/amdgpu: avoid buffer overflow attach in smu_sys_set_pp_table()
drm/amdkfd: Ensure consistent barrier state saved in gfx12 trap handler
drm/amdgpu: bail out when failed to load fw in psp_init_cap_microcode()
amdkfd: properly free gang_ctx_bo when failed to init user queue
drm/amdgpu: bump version for RV/PCO compute fix
drm/amdgpu/gfx9: manually control gfxoff for CS on RV
drm/amdgpu/pm: fix UVD handing in amdgpu_dpm_set_powergating_by_smu()
drm/xe: Carve out wopcm portion from the stolen memory
drm/i915/selftests: avoid using uninitialized context
drm/xe/client: bo->client does not need bos_lock
drm/hisilicon/hibmc: select CONFIG_DRM_DISPLAY_DP_HELPER
drm/panthor: avoid garbage value in panthor_ioctl_dev_query()
gpu: host1x: Fix a use of uninitialized mutex
drm/tests: hdmi: Fix recursive locking
drm/tests: hdmi: Reorder DRM entities variables assignment
drm/tests: hdmi: Remove redundant assignments
drm/tests: hdmi: Fix WW_MUTEX_SLOWPATH failures
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
- Remove bo->clients out of bos_lock area (Tejas)
- Carve out wopcm portion from the stolen memory (Nirmoy)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Z64rCicgpBe_t5GY@intel.com
|
|
https://gitlab.freedesktop.org/drm/i915/kernel into drm-fixes
- Selftest fix: avoid using uninitialized context
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Z64qg13R_72iN3_X@intel.com
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.14-2025-02-13:
amdgpu:
- Fix shutdown regression on old APUs
- Fix compute queue hang on gfx9 APUs
- Fix possible invalid access in PSP failure path
- Avoid possible buffer overflow in pptable override
amdkfd:
- Properly free gang bo in failure path
- GFX12 trap handler fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250213153843.242640-1-alexander.deucher@amd.com
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
Some locking fixes for the HDMI infrastructure tests, an unitialized
mutex fix for host1x, an unitialized variable fix for panthor, and a
config selection fix for hibmc.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250213-brilliant-terrier-from-hell-d06dd5@houat
|
|
Add a new entry for the I2C QCOM GENI driver to the MAINTAINERS file.
This entry includes the maintainer's name and contact information,
ensuring proper maintainership and communication for the i2c-qcom-geni
driver file.
Signed-off-by: Mukesh Kumar Savaliya <quic_msavaliy@quicinc.com>
Link: https://lore.kernel.org/r/20250123084147.3632023-1-quic_msavaliy@quicinc.com
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
The maintainer's email address bounced and he wasn't active for 4 years.
Delete this entry and fall back to the generic I2C host drivers entry.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20250213162950.45596-2-wsa+renesas@sang-engineering.com
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
