| Age | Commit message (Collapse) | Author |
|---|
|
Add check for the return value of mgmt_alloc_skb() in
mgmt_device_connected() to prevent null pointer dereference.
Fixes: e96741437ef0 ("Bluetooth: mgmt: Make use of mgmt_send_event_skb in MGMT_EV_DEVICE_CONNECTED")
Cc: stable@vger.kernel.org
Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Add check for the return value of mgmt_alloc_skb() in
mgmt_remote_name() to prevent null pointer dereference.
Fixes: ba17bb62ce41 ("Bluetooth: Fix skb allocation in mgmt_remote_name() & mgmt_device_connected()")
Cc: stable@vger.kernel.org
Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Initialize .owner field of force_poll_sync_fops to THIS_MODULE in order to
prevent btusb from being unloaded while its operations are in use.
Fixes: 800fe5ec302e ("Bluetooth: btusb: Add support for queuing during polling interval")
Signed-off-by: Salah Triki <salah.triki@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth.
We didn't get netfilter or wireless PRs this week, so next week's PR
is probably going to be bigger. A healthy dose of fixes for bugs
introduced in the current release nonetheless.
Current release - regressions:
- Bluetooth: always allow SCO packets for user channel
- af_unix: fix memory leak in unix_dgram_sendmsg()
- rxrpc:
- remove redundant peer->mtu_lock causing lockdep splats
- fix spinlock flavor issues with the peer record hash
- eth: iavf: fix circular lock dependency with netdev_lock
- net: use rtnl_net_dev_lock() in
register_netdevice_notifier_dev_net() RDMA driver register notifier
after the device
Current release - new code bugs:
- ethtool: fix ioctl confusing drivers about desired HDS user config
- eth: ixgbe: fix media cage present detection for E610 device
Previous releases - regressions:
- loopback: avoid sending IP packets without an Ethernet header
- mptcp: reset connection when MPTCP opts are dropped after join
Previous releases - always broken:
- net: better track kernel sockets lifetime
- ipv6: fix dst ref loop on input in seg6 and rpl lw tunnels
- phy: qca807x: use right value from DTS for DAC_DSP_BIAS_CURRENT
- eth: enetc: number of error handling fixes
- dsa: rtl8366rb: reshuffle the code to fix config / build issue with
LED support"
* tag 'net-6.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (53 commits)
net: ti: icss-iep: Reject perout generation request
idpf: fix checksums set in idpf_rx_rsc()
selftests: drv-net: Check if combined-count exists
net: ipv6: fix dst ref loop on input in rpl lwt
net: ipv6: fix dst ref loop on input in seg6 lwt
usbnet: gl620a: fix endpoint checking in genelink_bind()
net/mlx5: IRQ, Fix null string in debug print
net/mlx5: Restore missing trace event when enabling vport QoS
net/mlx5: Fix vport QoS cleanup on error
net: mvpp2: cls: Fixed Non IP flow, with vlan tag flow defination.
af_unix: Fix memory leak in unix_dgram_sendmsg()
net: Handle napi_schedule() calls from non-interrupt
net: Clear old fragment checksum value in napi_reuse_skb
gve: unlink old napi when stopping a queue using queue API
net: Use rtnl_net_dev_lock() in register_netdevice_notifier_dev_net().
tcp: Defer ts_recent changes until req is owned
net: enetc: fix the off-by-one issue in enetc_map_tx_tso_buffs()
net: enetc: remove the mm_lock from the ENETC v4 driver
net: enetc: add missing enetc4_link_deinit()
net: enetc: update UDP checksum when updating originTimestamp field
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of fixes. The only slightly large change is for ASoC
Cirrus codec, but that's still in a normal range. All the rest are
small device-specific fixes and should be fairly safe to take"
* tag 'sound-6.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/realtek: Fix microphone regression on ASUS N705UD
ALSA: hda/realtek: Fix wrong mic setup for ASUS VivoBook 15
ASoC: cs35l56: Prevent races when soft-resetting using SPI control
firmware: cs_dsp: Remove async regmap writes
ASoC: Intel: sof_sdw: warn both sdw and pch dmic are used
ASoC: SOF: Intel: don't check number of sdw links when set dmic_fixup
ASoC: dapm-graph: set fill colour of turned on nodes
ASoC: fsl: Rename stream name of SAI DAI driver
ASoC: es8328: fix route from DAC to output
ALSA: usb-audio: Re-add sample rate quirk for Pioneer DJM-900NXS2
ASoC: tas2764: Set the SDOUT polarity correctly
ASoC: tas2764: Fix power control mask
ALSA: usb-audio: Avoid dropping MIDI events at closing multiple ports
ASoC: tas2770: Fix volume scale
|
|
IEP driver supports both perout and pps signal generation
but perout feature is faulty with half-cooked support
due to some missing configuration. Remove perout
support from the driver and reject perout requests with
"not supported" error code.
Fixes: c1e0230eeaab2 ("net: ti: icss-iep: Add IEP driver")
Signed-off-by: Meghana Malladi <m-malladi@ti.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20250227092441.1848419-1-m-malladi@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
idpf_rx_rsc() uses skb_transport_offset(skb) while the transport header
is not set yet.
This triggers the following warning for CONFIG_DEBUG_NET=y builds.
DEBUG_NET_WARN_ON_ONCE(!skb_transport_header_was_set(skb))
[ 69.261620] WARNING: CPU: 7 PID: 0 at ./include/linux/skbuff.h:3020 idpf_vport_splitq_napi_poll (include/linux/skbuff.h:3020) idpf
[ 69.261629] Modules linked in: vfat fat dummy bridge intel_uncore_frequency_tpmi intel_uncore_frequency_common intel_vsec_tpmi idpf intel_vsec cdc_ncm cdc_eem cdc_ether usbnet mii xhci_pci xhci_hcd ehci_pci ehci_hcd libeth
[ 69.261644] CPU: 7 UID: 0 PID: 0 Comm: swapper/7 Tainted: G S W 6.14.0-smp-DEV #1697
[ 69.261648] Tainted: [S]=CPU_OUT_OF_SPEC, [W]=WARN
[ 69.261650] RIP: 0010:idpf_vport_splitq_napi_poll (include/linux/skbuff.h:3020) idpf
[ 69.261677] ? __warn (kernel/panic.c:242 kernel/panic.c:748)
[ 69.261682] ? idpf_vport_splitq_napi_poll (include/linux/skbuff.h:3020) idpf
[ 69.261687] ? report_bug (lib/bug.c:?)
[ 69.261690] ? handle_bug (arch/x86/kernel/traps.c:285)
[ 69.261694] ? exc_invalid_op (arch/x86/kernel/traps.c:309)
[ 69.261697] ? asm_exc_invalid_op (arch/x86/include/asm/idtentry.h:621)
[ 69.261700] ? __pfx_idpf_vport_splitq_napi_poll (drivers/net/ethernet/intel/idpf/idpf_txrx.c:4011) idpf
[ 69.261704] ? idpf_vport_splitq_napi_poll (include/linux/skbuff.h:3020) idpf
[ 69.261708] ? idpf_vport_splitq_napi_poll (drivers/net/ethernet/intel/idpf/idpf_txrx.c:3072) idpf
[ 69.261712] __napi_poll (net/core/dev.c:7194)
[ 69.261716] net_rx_action (net/core/dev.c:7265)
[ 69.261718] ? __qdisc_run (net/sched/sch_generic.c:293)
[ 69.261721] ? sched_clock (arch/x86/include/asm/preempt.h:84 arch/x86/kernel/tsc.c:288)
[ 69.261726] handle_softirqs (kernel/softirq.c:561)
Fixes: 3a8845af66edb ("idpf: add RX splitq napi poll support")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Alan Brady <alan.brady@intel.com>
Cc: Joshua Hay <joshua.a.hay@intel.com>
Cc: Willem de Bruijn <willemb@google.com>
Acked-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://patch.msgid.link/20250226221253.1927782-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Some drivers, like tg3, do not set combined-count:
$ ethtool -l enp4s0f1
Channel parameters for enp4s0f1:
Pre-set maximums:
RX: 4
TX: 4
Other: n/a
Combined: n/a
Current hardware settings:
RX: 4
TX: 1
Other: n/a
Combined: n/a
In the case where combined-count is not set, the ethtool netlink code
in the kernel elides the value and the code in the test:
netnl.channels_get(...)
With a tg3 device, the returned dictionary looks like:
{'header': {'dev-index': 3, 'dev-name': 'enp4s0f1'},
'rx-max': 4,
'rx-count': 4,
'tx-max': 4,
'tx-count': 1}
Note that the key 'combined-count' is missing. As a result of this
missing key the test raises an exception:
# Exception| if channels['combined-count'] == 0:
# Exception| ~~~~~~~~^^^^^^^^^^^^^^^^^^
# Exception| KeyError: 'combined-count'
Change the test to check if 'combined-count' is a key in the dictionary
first and if not assume that this means the driver has separate RX and
TX queues.
With this change, the test now passes successfully on tg3 and mlx5
(which does have a 'combined-count').
Fixes: 1cf270424218 ("net: selftest: add test for netdev netlink queue-get API")
Signed-off-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: David Wei <dw@davidwei.uk>
Link: https://patch.msgid.link/20250226181957.212189-1-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Justin Iurman says:
====================
fixes for seg6 and rpl lwtunnels on input
As a follow up to commit 92191dd10730 ("net: ipv6: fix dst ref loops in
rpl, seg6 and ioam6 lwtunnels"), we also need a conditional dst cache on
input for seg6_iptunnel and rpl_iptunnel to prevent dst ref loops (i.e.,
if the packet destination did not change, we may end up recording a
reference to the lwtunnel in its own cache, and the lwtunnel state will
never be freed). This series provides a fix to respectively prevent a
dst ref loop on input in seg6_iptunnel and rpl_iptunnel.
v2:
- https://lore.kernel.org/netdev/20250211221624.18435-1-justin.iurman@uliege.be/
v1:
- https://lore.kernel.org/netdev/20250209193840.20509-1-justin.iurman@uliege.be/
====================
Link: https://patch.msgid.link/20250225175139.25239-1-justin.iurman@uliege.be
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Prevent a dst ref loop on input in rpl_iptunnel.
Fixes: a7a29f9c361f ("net: ipv6: add rpl sr tunnel")
Cc: Alexander Aring <alex.aring@gmail.com>
Cc: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Prevent a dst ref loop on input in seg6_iptunnel.
Fixes: af4a2209b134 ("ipv6: sr: use dst_cache in seg6_input")
Cc: David Lebrun <dlebrun@google.com>
Cc: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Syzbot reports [1] a warning in usb_submit_urb() triggered by
inconsistencies between expected and actually present endpoints
in gl620a driver. Since genelink_bind() does not properly
verify whether specified eps are in fact provided by the device,
in this case, an artificially manufactured one, one may get a
mismatch.
Fix the issue by resorting to a usbnet utility function
usbnet_get_endpoints(), usually reserved for this very problem.
Check for endpoints and return early before proceeding further if
any are missing.
[1] Syzbot report:
usb 5-1: Manufacturer: syz
usb 5-1: SerialNumber: syz
usb 5-1: config 0 descriptor??
gl620a 5-1:0.23 usb0: register 'gl620a' at usb-dummy_hcd.0-1, ...
------------[ cut here ]------------
usb 5-1: BOGUS urb xfer, pipe 3 != type 1
WARNING: CPU: 2 PID: 1841 at drivers/usb/core/urb.c:503 usb_submit_urb+0xe4b/0x1730 drivers/usb/core/urb.c:503
Modules linked in:
CPU: 2 UID: 0 PID: 1841 Comm: kworker/2:2 Not tainted 6.12.0-syzkaller-07834-g06afb0f36106 #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
Workqueue: mld mld_ifc_work
RIP: 0010:usb_submit_urb+0xe4b/0x1730 drivers/usb/core/urb.c:503
...
Call Trace:
<TASK>
usbnet_start_xmit+0x6be/0x2780 drivers/net/usb/usbnet.c:1467
__netdev_start_xmit include/linux/netdevice.h:5002 [inline]
netdev_start_xmit include/linux/netdevice.h:5011 [inline]
xmit_one net/core/dev.c:3590 [inline]
dev_hard_start_xmit+0x9a/0x7b0 net/core/dev.c:3606
sch_direct_xmit+0x1ae/0xc30 net/sched/sch_generic.c:343
__dev_xmit_skb net/core/dev.c:3827 [inline]
__dev_queue_xmit+0x13d4/0x43e0 net/core/dev.c:4400
dev_queue_xmit include/linux/netdevice.h:3168 [inline]
neigh_resolve_output net/core/neighbour.c:1514 [inline]
neigh_resolve_output+0x5bc/0x950 net/core/neighbour.c:1494
neigh_output include/net/neighbour.h:539 [inline]
ip6_finish_output2+0xb1b/0x2070 net/ipv6/ip6_output.c:141
__ip6_finish_output net/ipv6/ip6_output.c:215 [inline]
ip6_finish_output+0x3f9/0x1360 net/ipv6/ip6_output.c:226
NF_HOOK_COND include/linux/netfilter.h:303 [inline]
ip6_output+0x1f8/0x540 net/ipv6/ip6_output.c:247
dst_output include/net/dst.h:450 [inline]
NF_HOOK include/linux/netfilter.h:314 [inline]
NF_HOOK include/linux/netfilter.h:308 [inline]
mld_sendpack+0x9f0/0x11d0 net/ipv6/mcast.c:1819
mld_send_cr net/ipv6/mcast.c:2120 [inline]
mld_ifc_work+0x740/0xca0 net/ipv6/mcast.c:2651
process_one_work+0x9c5/0x1ba0 kernel/workqueue.c:3229
process_scheduled_works kernel/workqueue.c:3310 [inline]
worker_thread+0x6c8/0xf00 kernel/workqueue.c:3391
kthread+0x2c1/0x3a0 kernel/kthread.c:389
ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
</TASK>
Reported-by: syzbot+d693c07c6f647e0388d3@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=d693c07c6f647e0388d3
Fixes: 47ee3051c856 ("[PATCH] USB: usbnet (5/9) module for genesys gl620a cables")
Cc: stable@vger.kernel.org
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Link: https://patch.msgid.link/20250224172919.1220522-1-n.zhandarovich@fintech.ru
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Tariq Toukan says:
====================
mlx5 misc fixes 2025-02-25
This small patchset provides misc bug fixes from the team to the mlx5
core driver.
====================
Link: https://patch.msgid.link/20250225072608.526866-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
irq_pool_alloc() debug print can print a null string.
Fix it by providing a default string to print.
Fixes: 71e084e26414 ("net/mlx5: Allocating a pool of MSI-X vectors for SFs")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202501141055.SwfIphN0-lkp@intel.com/
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Link: https://patch.msgid.link/20250225072608.526866-4-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Restore the `trace_mlx5_esw_vport_qos_create` event when creating
the vport scheduling element. This trace event was lost during
refactoring.
Fixes: be034baba83e ("net/mlx5: Make vport QoS enablement more flexible for future extensions")
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250225072608.526866-3-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When enabling vport QoS fails, the scheduling node was never freed,
causing a leak.
Add the missing free and reset the vport scheduling node pointer to
NULL.
Fixes: be034baba83e ("net/mlx5: Make vport QoS enablement more flexible for future extensions")
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250225072608.526866-2-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Non IP flow, with vlan tag not working as expected while
running below command for vlan-priority. fixed that.
ethtool -N eth1 flow-type ether vlan 0x8000 vlan-mask 0x1fff action 0 loc 0
Fixes: 1274daede3ef ("net: mvpp2: cls: Add steering based on vlan Id and priority.")
Signed-off-by: Harshal Chaudhari <hchaudhari@marvell.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20250225042058.2643838-1-hchaudhari@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
After running the 'sendmsg02' program of Linux Test Project (LTP),
kmemleak reports the following memory leak:
# cat /sys/kernel/debug/kmemleak
unreferenced object 0xffff888243866800 (size 2048):
comm "sendmsg02", pid 67, jiffies 4294903166
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 5e 00 00 00 00 00 00 00 ........^.......
01 00 07 40 00 00 00 00 00 00 00 00 00 00 00 00 ...@............
backtrace (crc 7e96a3f2):
kmemleak_alloc+0x56/0x90
kmem_cache_alloc_noprof+0x209/0x450
sk_prot_alloc.constprop.0+0x60/0x160
sk_alloc+0x32/0xc0
unix_create1+0x67/0x2b0
unix_create+0x47/0xa0
__sock_create+0x12e/0x200
__sys_socket+0x6d/0x100
__x64_sys_socket+0x1b/0x30
x64_sys_call+0x7e1/0x2140
do_syscall_64+0x54/0x110
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Commit 689c398885cc ("af_unix: Defer sock_put() to clean up path in
unix_dgram_sendmsg().") defers sock_put() in the error handling path.
However, it fails to account for the condition 'msg->msg_namelen != 0',
resulting in a memory leak when the code jumps to the 'lookup' label.
Fix issue by calling sock_put() if 'msg->msg_namelen != 0' is met.
Fixes: 689c398885cc ("af_unix: Defer sock_put() to clean up path in unix_dgram_sendmsg().")
Signed-off-by: Adrian Huang <ahuang12@lenovo.com>
Acked-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250225021457.1824-1-ahuang12@lenovo.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
napi_schedule() is expected to be called either:
* From an interrupt, where raised softirqs are handled on IRQ exit
* From a softirq disabled section, where raised softirqs are handled on
the next call to local_bh_enable().
* From a softirq handler, where raised softirqs are handled on the next
round in do_softirq(), or further deferred to a dedicated kthread.
Other bare tasks context may end up ignoring the raised NET_RX vector
until the next random softirq handling opportunity, which may not
happen before a while if the CPU goes idle afterwards with the tick
stopped.
Such "misuses" have been detected on several places thanks to messages
of the kind:
"NOHZ tick-stop error: local softirq work is pending, handler #08!!!"
For example:
__raise_softirq_irqoff
__napi_schedule
rtl8152_runtime_resume.isra.0
rtl8152_resume
usb_resume_interface.isra.0
usb_resume_both
__rpm_callback
rpm_callback
rpm_resume
__pm_runtime_resume
usb_autoresume_device
usb_remote_wakeup
hub_event
process_one_work
worker_thread
kthread
ret_from_fork
ret_from_fork_asm
And also:
* drivers/net/usb/r8152.c::rtl_work_func_t
* drivers/net/netdevsim/netdev.c::nsim_start_xmit
There is a long history of issues of this kind:
019edd01d174 ("ath10k: sdio: Add missing BH locking around napi_schdule()")
330068589389 ("idpf: disable local BH when scheduling napi for marker packets")
e3d5d70cb483 ("net: lan78xx: fix "softirq work is pending" error")
e55c27ed9ccf ("mt76: mt7615: add missing bh-disable around rx napi schedule")
c0182aa98570 ("mt76: mt7915: add missing bh-disable around tx napi enable/schedule")
970be1dff26d ("mt76: disable BH around napi_schedule() calls")
019edd01d174 ("ath10k: sdio: Add missing BH locking around napi_schdule()")
30bfec4fec59 ("can: rx-offload: can_rx_offload_threaded_irq_finish(): add new function to be called from threaded interrupt")
e63052a5dd3c ("mlx5e: add add missing BH locking around napi_schdule()")
83a0c6e58901 ("i40e: Invoke softirqs after napi_reschedule")
bd4ce941c8d5 ("mlx4: Invoke softirqs after napi_reschedule")
8cf699ec849f ("mlx4: do not call napi_schedule() without care")
ec13ee80145c ("virtio_net: invoke softirqs after __napi_schedule")
This shows that relying on the caller to arrange a proper context for
the softirqs to be handled while calling napi_schedule() is very fragile
and error prone. Also fixing them can also prove challenging if the
caller may be called from different kinds of contexts.
Therefore fix this from napi_schedule() itself with waking up ksoftirqd
when softirqs are raised from task contexts.
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reported-by: Jakub Kicinski <kuba@kernel.org>
Reported-by: Francois Romieu <romieu@fr.zoreil.com>
Closes: https://lore.kernel.org/lkml/354a2690-9bbf-4ccb-8769-fa94707a9340@molgen.mpg.de/
Cc: Breno Leitao <leitao@debian.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250223221708.27130-1-frederic@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In certain cases, napi_get_frags() returns an skb that points to an old
received fragment, This skb may have its skb->ip_summed, csum, and other
fields set from previous fragment handling.
Some network drivers set skb->ip_summed to either CHECKSUM_COMPLETE or
CHECKSUM_UNNECESSARY when getting skb from napi_get_frags(), while
others only set skb->ip_summed when RX checksum offload is enabled on
the device, and do not set any value for skb->ip_summed when hardware
checksum offload is disabled, assuming that the skb->ip_summed
initiated to zero by napi_reuse_skb, ionic driver for example will
ignore/unset any value for the ip_summed filed if HW checksum offload is
disabled, and if we have a situation where the user disables the
checksum offload during a traffic that could lead to the following
errors shown in the kernel logs:
<IRQ>
dump_stack_lvl+0x34/0x48
__skb_gro_checksum_complete+0x7e/0x90
tcp6_gro_receive+0xc6/0x190
ipv6_gro_receive+0x1ec/0x430
dev_gro_receive+0x188/0x360
? ionic_rx_clean+0x25a/0x460 [ionic]
napi_gro_frags+0x13c/0x300
? __pfx_ionic_rx_service+0x10/0x10 [ionic]
ionic_rx_service+0x67/0x80 [ionic]
ionic_cq_service+0x58/0x90 [ionic]
ionic_txrx_napi+0x64/0x1b0 [ionic]
__napi_poll+0x27/0x170
net_rx_action+0x29c/0x370
handle_softirqs+0xce/0x270
__irq_exit_rcu+0xa3/0xc0
common_interrupt+0x80/0xa0
</IRQ>
This inconsistency sometimes leads to checksum validation issues in the
upper layers of the network stack.
To resolve this, this patch clears the skb->ip_summed value for each
reused skb in by napi_reuse_skb(), ensuring that the caller is responsible
for setting the correct checksum status. This eliminates potential
checksum validation issues caused by improper handling of
skb->ip_summed.
Fixes: 76620aafd66f ("gro: New frags interface to avoid copying shinfo")
Signed-off-by: Mohammad Heib <mheib@redhat.com>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250225112852.2507709-1-mheib@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When a queue is stopped using the ndo queue API, before
destroying its page pool, the associated NAPI instance
needs to be unlinked to avoid warnings.
Handle this by calling page_pool_disable_direct_recycling()
when stopping a queue.
Cc: stable@vger.kernel.org
Fixes: ebdfae0d377b ("gve: adopt page pool for DQ RDA mode")
Reviewed-by: Praveen Kaligineedi <pkaligineedi@google.com>
Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250226003526.1546854-1-hramamurthy@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Breno Leitao reported the splat below. [0]
Commit 65161fb544aa ("net: Fix dev_net(dev) race in
unregister_netdevice_notifier_dev_net().") added the
DEBUG_NET_WARN_ON_ONCE(), assuming that the netdev is not
registered before register_netdevice_notifier_dev_net().
But the assumption was simply wrong.
Let's use rtnl_net_dev_lock() in register_netdevice_notifier_dev_net().
[0]:
WARNING: CPU: 25 PID: 849 at net/core/dev.c:2150 register_netdevice_notifier_dev_net (net/core/dev.c:2150)
<TASK>
? __warn (kernel/panic.c:242 kernel/panic.c:748)
? register_netdevice_notifier_dev_net (net/core/dev.c:2150)
? register_netdevice_notifier_dev_net (net/core/dev.c:2150)
? report_bug (lib/bug.c:? lib/bug.c:219)
? handle_bug (arch/x86/kernel/traps.c:285)
? exc_invalid_op (arch/x86/kernel/traps.c:309)
? asm_exc_invalid_op (./arch/x86/include/asm/idtentry.h:621)
? register_netdevice_notifier_dev_net (net/core/dev.c:2150)
? register_netdevice_notifier_dev_net (./include/net/net_namespace.h:406 ./include/linux/netdevice.h:2663 net/core/dev.c:2144)
mlx5e_mdev_notifier_event+0x9f/0xf0 mlx5_ib
notifier_call_chain.llvm.12241336988804114627 (kernel/notifier.c:85)
blocking_notifier_call_chain (kernel/notifier.c:380)
mlx5_core_uplink_netdev_event_replay (drivers/net/ethernet/mellanox/mlx5/core/main.c:352)
mlx5_ib_roce_init.llvm.12447516292400117075+0x1c6/0x550 mlx5_ib
mlx5r_probe+0x375/0x6a0 mlx5_ib
? kernfs_put (./include/linux/instrumented.h:96 ./include/linux/atomic/atomic-arch-fallback.h:2278 ./include/linux/atomic/atomic-instrumented.h:1384 fs/kernfs/dir.c:557)
? auxiliary_match_id (drivers/base/auxiliary.c:174)
? mlx5r_mp_remove+0x160/0x160 mlx5_ib
really_probe (drivers/base/dd.c:? drivers/base/dd.c:658)
driver_probe_device (drivers/base/dd.c:830)
__driver_attach (drivers/base/dd.c:1217)
bus_for_each_dev (drivers/base/bus.c:369)
? driver_attach (drivers/base/dd.c:1157)
bus_add_driver (drivers/base/bus.c:679)
driver_register (drivers/base/driver.c:249)
Fixes: 7fb1073300a2 ("net: Hold rtnl_net_lock() in (un)?register_netdevice_notifier_dev_net().")
Reported-by: Breno Leitao <leitao@debian.org>
Closes: https://lore.kernel.org/netdev/20250224-noisy-cordial-roadrunner-fad40c@leitao/
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Tested-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20250225211023.96448-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull bcachefs fixes from Kent Overstreet:
"A couple small ones, the main user visible changes/fixes are:
- Fix a bug where truncate would rarely fail and return 1
- Revert the directory i_size code: this turned out to have a number
of issues that weren't noticed because the fsck code wasn't
correctly reporting errors (ouch), and we're late enough in the
cycle that it can just wait until 6.15"
* tag 'bcachefs-2025-02-26' of git://evilpiepirate.org/bcachefs:
bcachefs: Fix truncate sometimes failing and returning 1
bcachefs: Fix deadlock
bcachefs: Check for -BCH_ERR_open_buckets_empty in journal resize
bcachefs: Revert directory i_size
bcachefs: fix bch2_extent_ptr_eq()
bcachefs: Fix memmove when move keys down
bcachefs: print op->nonce on data update inconsistency
|
|
__bch_truncate_folio() may return 1 to indicate dirtyness of the folio
being truncated, needed for fpunch to get the i_size writes correct.
But truncate was forgetting to clear ret, and sometimes returning it as
an error.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This fixes two deadlocks:
1.pcpu_alloc_mutex involved one as pointed by syzbot[1]
2.recursion deadlock.
The root cause is that we hold the bc lock during alloc_percpu, fix it
by following the pattern used by __btree_node_mem_alloc().
[1] https://lore.kernel.org/all/66f97d9a.050a0220.6bad9.001d.GAE@google.com/T/
Reported-by: syzbot+fe63f377148a6371a9db@syzkaller.appspotmail.com
Tested-by: syzbot+fe63f377148a6371a9db@syzkaller.appspotmail.com
Signed-off-by: Alan Huang <mmpgouride@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This fixes occasional failures from journal resize.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This turned out to have several bugs, which were missed because the fsck
code wasn't properly reporting errors - whoops.
Kicking it out for now, hopefully it can make 6.15.
Cc: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Small ufs fixes and a core change to clear the command private area on
every retry (which fixes a reported bug in virtio_scsi)"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: core: bsg: Fix crash when arpmb command fails
scsi: ufs: core: Set default runtime/system PM levels before ufshcd_hba_init()
scsi: core: Clear driver private data when retrying request
scsi: ufs: core: Fix ufshcd_is_ufs_dev_busy() and ufshcd_eh_timed_out()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
Pull workqueue update from Tejun Heo:
"This contains a patch improve debug visibility.
While it isn't a fix, the change carries virtually no risk and makes
it substantially easier to chase down a class of problems"
* tag 'wq-for-6.14-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: Log additional details when rejecting work
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext fix from Tejun Heo:
"pick_task_scx() has a workaround to avoid stalling when the fair
class's balance() says yes but pick_task() says no.
The workaround was incorrectly deciding to keep the prev taks running
if the task is on SCX even when the task is in a sleeping state, which
can lead to several confusing failure modes.
Fix it by testing the prev task is currently queued on SCX instead"
* tag 'sched_ext-for-6.14-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
sched_ext: Fix pick_task_scx() picking non-queued tasks when it's called without balance()
|
|
Pull NFS client fixes from Anna Schumaker:
"Stable Fixes:
- O_DIRECT writes should adjust file length
Other Bugfixes:
- Adjust delegated timestamps for O_DIRECT reads and writes
- Prevent looping due to rpc_signal_task() races
- Fix a deadlock when recovering state on a sillyrenamed file
- Properly handle -ETIMEDOUT errors from tlshd
- Suppress build warnings for unused procfs functions
- Fix memory leak of lsm_contexts"
* tag 'nfs-for-6.14-2' of git://git.linux-nfs.org/projects/anna/linux-nfs:
lsm,nfs: fix memory leak of lsm_context
sunrpc: suppress warnings for unused procfs functions
SUNRPC: Handle -ETIMEDOUT return from tlshd
NFSv4: Fix a deadlock when recovering state on a sillyrenamed file
SUNRPC: Prevent looping due to rpc_signal_task() races
NFS: Adjust delegated timestamps for O_DIRECT reads and writes
NFS: O_DIRECT writes must check and adjust the file length
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux
Pull landlock fixes from Mickaël Salaün:
"Fixes to TCP socket identification, documentation, and tests"
* tag 'landlock-6.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
selftests/landlock: Add binaries to .gitignore
selftests/landlock: Test that MPTCP actions are not restricted
selftests/landlock: Test TCP accesses with protocol=IPPROTO_TCP
landlock: Fix non-TCP sockets restriction
landlock: Minor typo and grammar fixes in IPC scoping documentation
landlock: Fix grammar error
selftests/landlock: Enable the new CONFIG_AF_UNIX_OOB
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity
Pull integrity fixes from Mimi Zohar:
"One bugfix and one spelling cleanup. The bug fix restores a
performance improvement"
* tag 'integrity-v6.14-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
ima: Reset IMA_NONACTION_RULE_FLAGS after post_setattr
integrity: fix typos and spelling errors
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.14
More driver specific fixes, the firmware change is part of fixing the
race conditions in the Cirrus driver.
|
|
This fixes a regression introduced a few weeks ago in stable kernels
6.12.14 and 6.13.3. The internal microphone on ASUS Vivobook N705UD /
X705UD laptops is broken: the microphone appears in userspace (e.g.
Gnome settings) but no sound is detected.
I bisected it to commit 3b4309546b48 ("ALSA: hda: Fix headset detection
failure due to unstable sort").
I figured out the cause:
1. The initial pins enabled for the ALC256 driver are:
cfg->inputs == {
{ pin=0x19, type=AUTO_PIN_MIC,
is_headset_mic=1, is_headphone_mic=0, has_boost_on_pin=1 },
{ pin=0x1a, type=AUTO_PIN_MIC,
is_headset_mic=0, is_headphone_mic=0, has_boost_on_pin=1 } }
2. Since 2017 and commits c1732ede5e8 ("ALSA: hda/realtek - Fix headset
and mic on several ASUS laptops with ALC256") and 28e8af8a163 ("ALSA:
hda/realtek: Fix mic and headset jack sense on ASUS X705UD"), the
quirk ALC256_FIXUP_ASUS_MIC is also applied to ASUS X705UD / N705UD
laptops.
This added another internal microphone on pin 0x13:
cfg->inputs == {
{ pin=0x13, type=AUTO_PIN_MIC,
is_headset_mic=0, is_headphone_mic=0, has_boost_on_pin=1 },
{ pin=0x19, type=AUTO_PIN_MIC,
is_headset_mic=1, is_headphone_mic=0, has_boost_on_pin=1 },
{ pin=0x1a, type=AUTO_PIN_MIC,
is_headset_mic=0, is_headphone_mic=0, has_boost_on_pin=1 } }
I don't know what this pin 0x13 corresponds to. To the best of my
knowledge, these laptops have only one internal microphone.
3. Before 2025 and commit 3b4309546b48 ("ALSA: hda: Fix headset
detection failure due to unstable sort"), the sort function would let
the microphone of pin 0x1a (the working one) *before* the microphone
of pin 0x13 (the phantom one).
4. After this commit 3b4309546b48, the fixed sort function puts the
working microphone (pin 0x1a) *after* the phantom one (pin 0x13). As
a result, no sound is detected anymore.
It looks like the quirk ALC256_FIXUP_ASUS_MIC is not needed anymore for
ASUS Vivobook X705UD / N705UD laptops. Without it, everything works
fine:
- the internal microphone is detected and records actual sound,
- plugging in a jack headset is detected and can record actual sound
with it,
- unplugging the jack headset makes the system go back to internal
microphone and can record actual sound.
Cc: stable@vger.kernel.org
Cc: Kuan-Wei Chiu <visitorckw@gmail.com>
Cc: Chris Chiu <chris.chiu@canonical.com>
Fixes: 3b4309546b48 ("ALSA: hda: Fix headset detection failure due to unstable sort")
Tested-by: Adrien Vergé <adrienverge@gmail.com>
Signed-off-by: Adrien Vergé <adrienverge@gmail.com>
Link: https://patch.msgid.link/20250226135515.24219-1-adrienverge@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Recently a bug was discovered where the server had entered TCP_ESTABLISHED
state, but the upper layers were not notified.
The same 5-tuple packet may be processed by different CPUSs, so two
CPUs may receive different ack packets at the same time when the
state is TCP_NEW_SYN_RECV.
In that case, req->ts_recent in tcp_check_req may be changed concurrently,
which will probably cause the newsk's ts_recent to be incorrectly large.
So that tcp_validate_incoming will fail. At this point, newsk will not be
able to enter the TCP_ESTABLISHED.
cpu1 cpu2
tcp_check_req
tcp_check_req
req->ts_recent = rcv_tsval = t1
req->ts_recent = rcv_tsval = t2
syn_recv_sock
tcp_sk(child)->rx_opt.ts_recent = req->ts_recent = t2 // t1 < t2
tcp_child_process
tcp_rcv_state_process
tcp_validate_incoming
tcp_paws_check
if ((s32)(rx_opt->ts_recent - rx_opt->rcv_tsval) <= paws_win)
// t2 - t1 > paws_win, failed
tcp_v4_do_rcv
tcp_rcv_state_process
// TCP_ESTABLISHED
The cpu2's skb or a newly received skb will call tcp_v4_do_rcv to get
the newsk into the TCP_ESTABLISHED state, but at this point it is no
longer possible to notify the upper layer application. A notification
mechanism could be added here, but the fix is more complex, so the
current fix is used.
In tcp_check_req, req->ts_recent is used to assign a value to
tcp_sk(child)->rx_opt.ts_recent, so removing the change in req->ts_recent
and changing tcp_sk(child)->rx_opt.ts_recent directly after owning the
req fixes this bug.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fix from Madhavan Srinivasan:
- Fix for cross-reference in documentation and deprecation warning
Thanks to Andrew Donnellan and Bagas Sanjaya.
* tag 'powerpc-6.14-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
cxl: Fix cross-reference in documentation and add deprecation warning
|
|
Wei Fang says:
====================
net: enetc: fix some known issues
There are some issues with the enetc driver, some of which are specific
to the LS1028A platform, and some of which were introduced recently when
i.MX95 ENETC support was added, so this patch set aims to clean up those
issues.
v1: https://lore.kernel.org/20250217093906.506214-1-wei.fang@nxp.com
v2: https://lore.kernel.org/20250219054247.733243-1-wei.fang@nxp.com
====================
Link: https://patch.msgid.link/20250224111251.1061098-1-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There is an off-by-one issue for the err_chained_bd path, it will free
one more tx_swbd than expected. But there is no such issue for the
err_map_data path. To fix this off-by-one issue and make the two error
handling consistent, the increment of 'i' and 'count' remain in sync
and enetc_unwind_tx_frame() is called for error handling.
Fixes: fb8629e2cbfc ("net: enetc: add support for software TSO")
Cc: stable@vger.kernel.org
Suggested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Link: https://patch.msgid.link/20250224111251.1061098-9-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, the ENETC v4 driver has not added the MAC merge layer support
in the upstream, so the mm_lock is not initialized and used, so remove
the mm_lock from the driver.
Fixes: 99100d0d9922 ("net: enetc: add preliminary support for i.MX95 ENETC PF")
Cc: stable@vger.kernel.org
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250224111251.1061098-8-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The enetc4_link_init() is called when the PF driver probes to create
phylink and MDIO bus, but we forgot to call enetc4_link_deinit() to
free the phylink and MDIO bus when the driver was unbound. so add
missing enetc4_link_deinit() to enetc4_pf_netdev_destroy().
Fixes: 99100d0d9922 ("net: enetc: add preliminary support for i.MX95 ENETC PF")
Cc: stable@vger.kernel.org
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250224111251.1061098-7-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There is an issue with one-step timestamp based on UDP/IP. The peer will
discard the sync packet because of the wrong UDP checksum. For ENETC v1,
the software needs to update the UDP checksum when updating the
originTimestamp field, so that the hardware can correctly update the UDP
checksum when updating the correction field. Otherwise, the UDP checksum
in the sync packet will be wrong.
Fixes: 7294380c5211 ("enetc: support PTP Sync packet one-step timestamping")
Cc: stable@vger.kernel.org
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250224111251.1061098-6-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Actually ENETC VFs do not support HWTSTAMP_TX_ONESTEP_SYNC because only
ENETC PF can access PMa_SINGLE_STEP registers. And there will be a crash
if VFs are used to test one-step timestamp, the crash log as follows.
[ 129.110909] Unable to handle kernel paging request at virtual address 00000000000080c0
[ 129.287769] Call trace:
[ 129.290219] enetc_port_mac_wr+0x30/0xec (P)
[ 129.294504] enetc_start_xmit+0xda4/0xe74
[ 129.298525] enetc_xmit+0x70/0xec
[ 129.301848] dev_hard_start_xmit+0x98/0x118
Fixes: 41514737ecaa ("enetc: add get_ts_info interface for ethtool")
Cc: stable@vger.kernel.org
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250224111251.1061098-5-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The 'xdp_tx' is used to count the number of XDP_TX frames sent, not the
number of Tx BDs.
Fixes: 7ed2bc80074e ("net: enetc: add support for XDP_TX")
Cc: stable@vger.kernel.org
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250224111251.1061098-4-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When creating a TSO header, if the skb is VLAN tagged, the extended BD
will be used and the 'count' should be increased by 2 instead of 1.
Otherwise, when an error occurs, less tx_swbd will be freed than the
actual number.
Fixes: fb8629e2cbfc ("net: enetc: add support for software TSO")
Cc: stable@vger.kernel.org
Suggested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Link: https://patch.msgid.link/20250224111251.1061098-3-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When a DMA mapping error occurs while processing skb frags, it will free
one more tx_swbd than expected, so fix this off-by-one issue.
Fixes: d4fd0404c1c9 ("enetc: Introduce basic PF and VF ENETC ethernet drivers")
Cc: stable@vger.kernel.org
Suggested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Suggested-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Link: https://patch.msgid.link/20250224111251.1061098-2-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2025-02-24 (ice, idpf, iavf, ixgbe)
For ice:
Marcin moves incorrect call placement to clean up VF mailbox
tracking and changes call for configuring default VSI to allow
for existing rule.
For iavf:
Jake fixes a circular locking dependency.
For ixgbe:
Piotr corrects condition for determining media cage presence.
====================
Link: https://patch.msgid.link/20250224190647.3601930-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The commit 23c0e5a16bcc ("ixgbe: Add link management support for E610
device") introduced incorrect checking of media cage presence for E610
device. Fix it.
Fixes: 23c0e5a16bcc ("ixgbe: Add link management support for E610 device")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/e7d73b32-f12a-49d1-8b60-1ef83359ec13@stanley.mountain/
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Piotr Kwapulinski <piotr.kwapulinski@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Bharath R <bharath.r@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20250224190647.3601930-6-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We have recently seen reports of lockdep circular lock dependency warnings
when loading the iAVF driver:
[ 1504.790308] ======================================================
[ 1504.790309] WARNING: possible circular locking dependency detected
[ 1504.790310] 6.13.0 #net_next_rt.c2933b2befe2.el9 Not tainted
[ 1504.790311] ------------------------------------------------------
[ 1504.790312] kworker/u128:0/13566 is trying to acquire lock:
[ 1504.790313] ffff97d0e4738f18 (&dev->lock){+.+.}-{4:4}, at: register_netdevice+0x52c/0x710
[ 1504.790320]
[ 1504.790320] but task is already holding lock:
[ 1504.790321] ffff97d0e47392e8 (&adapter->crit_lock){+.+.}-{4:4}, at: iavf_finish_config+0x37/0x240 [iavf]
[ 1504.790330]
[ 1504.790330] which lock already depends on the new lock.
[ 1504.790330]
[ 1504.790330]
[ 1504.790330] the existing dependency chain (in reverse order) is:
[ 1504.790331]
[ 1504.790331] -> #1 (&adapter->crit_lock){+.+.}-{4:4}:
[ 1504.790333] __lock_acquire+0x52d/0xbb0
[ 1504.790337] lock_acquire+0xd9/0x330
[ 1504.790338] mutex_lock_nested+0x4b/0xb0
[ 1504.790341] iavf_finish_config+0x37/0x240 [iavf]
[ 1504.790347] process_one_work+0x248/0x6d0
[ 1504.790350] worker_thread+0x18d/0x330
[ 1504.790352] kthread+0x10e/0x250
[ 1504.790354] ret_from_fork+0x30/0x50
[ 1504.790357] ret_from_fork_asm+0x1a/0x30
[ 1504.790361]
[ 1504.790361] -> #0 (&dev->lock){+.+.}-{4:4}:
[ 1504.790364] check_prev_add+0xf1/0xce0
[ 1504.790366] validate_chain+0x46a/0x570
[ 1504.790368] __lock_acquire+0x52d/0xbb0
[ 1504.790370] lock_acquire+0xd9/0x330
[ 1504.790371] mutex_lock_nested+0x4b/0xb0
[ 1504.790372] register_netdevice+0x52c/0x710
[ 1504.790374] iavf_finish_config+0xfa/0x240 [iavf]
[ 1504.790379] process_one_work+0x248/0x6d0
[ 1504.790381] worker_thread+0x18d/0x330
[ 1504.790383] kthread+0x10e/0x250
[ 1504.790385] ret_from_fork+0x30/0x50
[ 1504.790387] ret_from_fork_asm+0x1a/0x30
[ 1504.790389]
[ 1504.790389] other info that might help us debug this:
[ 1504.790389]
[ 1504.790389] Possible unsafe locking scenario:
[ 1504.790389]
[ 1504.790390] CPU0 CPU1
[ 1504.790391] ---- ----
[ 1504.790391] lock(&adapter->crit_lock);
[ 1504.790393] lock(&dev->lock);
[ 1504.790394] lock(&adapter->crit_lock);
[ 1504.790395] lock(&dev->lock);
[ 1504.790397]
[ 1504.790397] *** DEADLOCK ***
This appears to be caused by the change in commit 5fda3f35349b ("net: make
netdev_lock() protect netdev->reg_state"), which added a netdev_lock() in
register_netdevice.
The iAVF driver calls register_netdevice() from iavf_finish_config(), as a
final stage of its state machine post-probe. It currently takes the RTNL
lock, then the netdev lock, and then the device critical lock. This pattern
is used throughout the driver. Thus there is a strong dependency that the
crit_lock should not be acquired before the net device lock. The change to
register_netdevice creates an ABBA lock order violation because the iAVF
driver is holding the crit_lock while calling register_netdevice, which
then takes the netdev_lock.
It seems likely that future refactors could result in netdev APIs which
hold the netdev_lock while calling into the driver. This means that we
should not re-order the locks so that netdev_lock is acquired after the
device private crit_lock.
Instead, notice that we already release the netdev_lock prior to calling
the register_netdevice. This flow only happens during the early driver
initialization as we transition through the __IAVF_STARTUP,
__IAVF_INIT_VERSION_CHECK, __IAVF_INIT_GET_RESOURCES, etc.
Analyzing the places where we take crit_lock in the driver there are two
sources:
a) several of the work queue tasks including adminq_task, watchdog_task,
reset_task, and the finish_config task.
b) various callbacks which ultimately stem back to .ndo operations or
ethtool operations.
The latter cannot be triggered until after the netdevice registration is
completed successfully.
The iAVF driver uses alloc_ordered_workqueue, which is an unbound workqueue
that has a max limit of 1, and thus guarantees that only a single work item
on the queue is executing at any given time, so none of the other work
threads could be executing due to the ordered workqueue guarantees.
The iavf_finish_config() function also does not do anything else after
register_netdevice, unless it fails. It seems unlikely that the driver
private crit_lock is protecting anything that register_netdevice() itself
touches.
Thus, to fix this ABBA lock violation, lets simply release the
adapter->crit_lock as well as netdev_lock prior to calling
register_netdevice(). We do still keep holding the RTNL lock as required by
the function. If we do fail to register the netdevice, then we re-acquire
the adapter critical lock to finish the transition back to
__IAVF_INIT_CONFIG_ADAPTER.
This ensures every call where both netdev_lock and the adapter->crit_lock
are acquired under the same ordering.
Fixes: afc664987ab3 ("eth: iavf: extend the netdev_lock usage")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20250224190647.3601930-5-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As part of switchdev environment setup, uplink VSI is configured as
default for both Tx and Rx. Default Rx VSI is also used by promiscuous
mode. If promisc mode is enabled and an attempt to enter switchdev mode
is made, the setup will fail because Rx VSI is already configured as
default (rule exists).
Reproducer:
devlink dev eswitch set $PF1_PCI mode switchdev
ip l s $PF1 up
ip l s $PF1 promisc on
echo 1 > /sys/class/net/$PF1/device/sriov_numvfs
In switchdev setup, use ice_set_dflt_vsi() instead of plain
ice_cfg_dflt_vsi(), which avoids repeating setting default VSI for Rx if
it's already configured.
Fixes: 50d62022f455 ("ice: default Tx rule instead of to queue")
Reported-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Closes: https://lore.kernel.org/intel-wired-lan/PH0PR11MB50138B635F2E5CEB7075325D961F2@PH0PR11MB5013.namprd11.prod.outlook.com
Reviewed-by: Martyna Szapar-Mudlaw <martyna.szapar-mudlaw@linux.intel.com>
Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20250224190647.3601930-3-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
