| Age | Commit message (Collapse) | Author |
|---|
|
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Greg Ungerer <gerg@uclinux.org>
|
|
The generic nop() implementation is fine for m68k.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Greg Ungerer <gerg@uclinux.org>
|
|
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Greg Ungerer <gerg@uclinux.org>
|
|
Reserve space from 0x0 - __pa(swapper_pg_dir),
if kernel is loaded from 0, which is not DMAable.
It is causing problem with MMC driver and others
which want to add dma buffers to this space.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Kevin Hilman <khilman@linaro.org>
|
|
From Nicolas Ferre:
First series of AT91 fixes for 3.14.
All of them are DT-related.
- fixes for typos in i2c and ohci clocks
- addition of a USB host node for at91sam9n12ek
- 2 DT documentation updates that have been sent a long time ago
- a new board based on the sama5d36 SoC
* tag 'at91-fixes' of git://github.com/at91linux/linux-at91:
ARM: at91: add Atmel's SAMA5D3 Xplained board
spi/atmel: document clock properties
mmc: atmel-mci: document clock properties
ARM: at91: enable USB host on at91sam9n12ek board
ARM: at91/dt: fix sama5d3 ohci hclk clock reference
ARM: at91/dt: sam9263: fix compatibility string for the I2C
Signed-off-by: Kevin Hilman <khilman@linaro.org>
|
|
Select CONFIG_SOC_DRA7XX so that we can boot dra7-evm.
DRA7 family are A15 based processors that supports LPAE and an
evolutionary update to the OMAP5 generation of processors.
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Kevin Hilman <khilman@linaro.org>
|
|
Since commit 9e8147bb5ec5d1dda2141da70f96b98985a306cb
"ARM: imx6q: move low-power code out of clock driver"
the kernel fails to boot on i.MX6Q/D if preemption is
enabled (CONFIG_PREEMPT=y). The kernel just hangs
before the console comes up.
The above commit moved the initalization of the low-power
mode setting (enabling clocked WAIT states), which was
introduced in commit 83ae20981ae924c37d02a42c829155fc3851260c
"ARM: imx: correct low-power mode setting", from
imx6q_clks_init to imx6q_pm_init. Now it is called
much later, after all cores are enabled.
This patch moves the low-power mode initialization back
to imx6q_clks_init again (and to imx6sl_clks_init).
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Kevin Hilman <khilman@linaro.org>
|
|
Pull CIFS fixes from Steve French:
"Small fix from Jeff for writepages leak, and some fixes for ACLs and
xattrs when SMB2 enabled.
Am expecting another fix from Jeff and at least one more fix (for
mounting SMB2 with cifsacl) in the next week"
* 'for-next' of git://git.samba.org/sfrench/cifs-2.6:
[CIFS] clean up page array when uncached write send fails
cifs: use a flexarray in cifs_writedata
retrieving CIFS ACLs when mounted with SMB2 fails dropping session
Add protocol specific operation for CIFS xattrs
|
|
Due to commit 88f718e3fa4d67f3a8dbe79a2f97d722323e4051
"ARM: pxa: delete the custom GPIO header" some drivers fail
compilation, for example like this:
In file included from sound/soc/pxa/spitz.c:28:0:
sound/soc/pxa/spitz.c: In function ‘spitz_ext_control’:
arch/arm/mach-pxa/include/mach/spitz.h:111:30: error:
‘PXA_NR_BUILTIN_GPIO’ undeclared (first use in this function)
#define SPITZ_SCP_GPIO_BASE (PXA_NR_BUILTIN_GPIO)
(etc.)
This is caused by implicit inclusion of <mach/irqs.h> from
various board-specific headers under <mach/*> in the PXA
platform. So we take a sweep over these, and for every such
header that uses PXA_NR_BUILTIN_GPIO or PXA_GPIO_TO_IRQ()
we explicitly #include "irqs.h" so that we satisfy the
dependency in the board include file alone.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: stable@vger.kernel.org # v3.13+
Signed-off-by: Kevin Hilman <khilman@linaro.org>
|
|
This board fails compilation like this:
arch/arm/mach-pxa/am300epd.c: In function ‘am300_cleanup’:
arch/arm/mach-pxa/am300epd.c:179:2: error: implicit declaration
of function ‘PXA_GPIO_TO_IRQ’ [-Werror=implicit-function-declaration]
free_irq(PXA_GPIO_TO_IRQ(RDY_GPIO_PIN), par);
This was caused by commit 88f718e3fa4d67f3a8dbe79a2f97d722323e4051
"ARM: pxa: delete the custom GPIO header"
This is because it was previously getting the macro PXA_GPIO_TO_IRQ
implicitly from <linux/gpio.h> which in turn implicitly included
<mach/gpio.h> which in turn included <mach/irqs.h>.
Add the missing include so that the board compiles again.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Kevin Hilman <khilman@linaro.org>
|
|
into fixes
From Jason Cooper:
mvebu phy and ata fixes for v3.14
- phy
- add support for optional phys via NULL
- ata
- fix boot hang due to probe failure of optional phys
NOTE: Series has been Ack'd by both the phy maintainer and the ata maintainer
for going through arm-soc
* tag 'mvebu-phy_ata-fixes-3.14' of git://git.infradead.org/linux-mvebu:
ata: sata_mv: Fix probe failures with optional phys
drivers: phy: Add support for optional phys
drivers: phy: Make NULL a valid phy reference
Signed-off-by: Kevin Hilman <khilman@linaro.org>
|
|
cppcheck detected following format string mismatch.
[blk-mq-tag.c:201]: (warning) %u in format string (no. 1) requires
'unsigned int' but the argument type is 'int'.
Change "cpu" from int to unsigned int, because the cpu
never become minus value.
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
If !CONFIG_ARM_AMBA, we shouldn't try to register ourselves with the
amba_bustype.
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
Whilst trying to bring-up an SMMUv2 implementation with the table
walker plumbed into a coherent interconnect, I noticed that the memory
transactions targetting the CPU caches from the SMMU were marked as
outer-shareable instead of inner-shareable.
After a bunch of digging, it seems that we actually need to program
CBARn.BPSHCFG for s1-s2-bypass contexts to act as non-shareable in order
for the shareability configured in the corresponding TTBCR not to be
overridden with an outer-shareable attribute.
Cc: <stable@vger.kernel.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
Now that we populate page tables as we traverse them ("iommu/arm-smmu:
fix pud/pmd entry fill sequence"), we need to ensure that we flush out
our zeroed tables after initial allocation, to prevent speculative TLB
fills using bogus data.
This patch adds additional calls to arm_smmu_flush_pgtable during
initial table allocation, and moves the dsb required by coherent table
walkers into the helper.
Cc: <stable@vger.kernel.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
Commit a44a9791e778 ("iommu/arm-smmu: use mutex instead of spinlock for
locking page tables") replaced the page table spinlock with a mutex, to
allow blocking allocations to satisfy lazy mapping requests.
Unfortunately, it turns out that IOMMU mappings are created from atomic
context (e.g. spinlock held during a dma_map), so this change doesn't
really help us in practice.
This patch is a partial revert of the offending commit, bringing back
the original spinlock but replacing our page table allocations for any
levels below the pgd (which is allocated during domain init) with
GFP_ATOMIC instead of GFP_KERNEL.
Cc: <stable@vger.kernel.org>
Reported-by: Andreas Herrmann <andreas.herrmann@calxeda.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
The ARM SMMU driver's population of puds and pmds is broken, since we
iterate over the next level of table repeatedly setting the current
level descriptor to point at the pmd being initialised. This is clearly
wrong when dealing with multiple pmds/puds.
This patch fixes the problem by moving the pud/pmd population out of the
loop and instead performing it when we allocate the next level (like we
correctly do for ptes already). The starting address for the next level
is then calculated prior to entering the loop.
Cc: <stable@vger.kernel.org>
Signed-off-by: Yifan Zhang <zhangyf@marvell.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
Witch to using a preallocated flush_rq for blk-mq similar to what's done
with the old request path. This allows us to set up the request properly
with a tag from the actually allowed range and ->rq_disk as needed by
some drivers. To make life easier we also switch to dynamic allocation
of ->flush_rq for the old path.
This effectively reverts most of
"blk-mq: fix for flush deadlock"
and
"blk-mq: Don't reserve a tag for flush request"
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
Use the block layer helpers for CPU-local completions instead of
reimplementing them locally.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
Make sure to complete requests on the submitting CPU. Previously this
was done in blk_mq_end_io, but the responsibility shifted to the drivers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
Rework I/O completions to work more like the old code path. blk_mq_end_io
now stays out of the business of deferring completions to others CPUs
and calling blk_mark_rq_complete. The latter is very important to allow
completing requests that have timed out and thus are already marked completed,
the former allows using the IPI callout even for driver specific completions
instead of having to reimplement them.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
glibc 2.17 is missing this on sparc, despite the fact that it's not
architecture-specific.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Fixes: 49af9e93adfa ('perf trace: Beautify eventfd2 'flags' arg')
Cc: <stable@vger.kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1391648435.3003.100.camel@deadeye.wl.decadent.org.uk
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
"perf list" listing of hardware events doesn't work on older ARM devices.
The change enabling event detection:
commit b41f1cec91c37eeea6fdb15effbfa24ea0a5536b
Author: Namhyung Kim <namhyung.kim@lge.com>
Date: Tue Aug 27 11:41:53 2013 +0900
perf list: Skip unsupported events
uses the following code in tools/perf/util/parse-events.c:
struct perf_event_attr attr = {
.type = type,
.config = config,
.disabled = 1,
.exclude_kernel = 1,
};
On ARM machines pre-dating the Cortex-A15 this doesn't work, as these
machines don't support .exclude_kernel. So starting with 3.12 "perf
list" does not report any hardware events at all on older machines (seen
on Rasp-Pi, Pandaboard, Beagleboard, etc).
This version of the patch makes changes suggested by Namhyung Kim to
check for EACCESS and retry (instead of just dropping the
exclude_kernel) so we can properly handle machines where
/proc/sys/kernel/perf_event_paranoid is set to 2.
Reported-by: Chad Paradis <chad.paradis@umit.maine.edu>
Signed-off-by: Vince Weaver <vincent.weaver@maine.edu>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Chad Paradis <chad.paradis@umit.maine.edu>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1312301536150.28814@vincent-weaver-1.um.maine.edu
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
We removed event types from data file in following commits:
6065210 perf tools: Remove event types framework completely
44b3c57 perf tools: Remove event types from perf data file
We no longer need this information, because we can get it directly from
tracepoints.
But we still need to handle PERF_RECORD_HEADER_EVENT_TYPE event for the
sake of old perf data files created in pipe mode like:
$ perf.3.4 record -o - foo >perf.data
$ perf.312 report -i - < perf.data
Reported-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1391524668-12546-1-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Fix perf-probe not to add offset value twice to uprobe probe address
when post processing.
The tevs[i].point.address struct member is the address of symbol+offset,
but current perf-probe adjusts the point.address by adding the offset.
As a result, the probe address becomes symbol+offset+offset. This may
cause unexpected code corruption. Urgent fix is needed.
Without this fix:
---
# ./perf probe -x ./perf dso__load_vmlinux+4
# ./perf probe -l
probe_perf:dso__load_vmlinux (on 0x000000000006d2b8)
# nm ./perf.orig | grep dso__load_vmlinux\$
000000000046d0a0 T dso__load_vmlinux
---
You can see the given offset is 3 but the actual probed address is
dso__load_vmlinux+8.
With this fix:
---
# ./perf probe -x ./perf dso__load_vmlinux+4
# ./perf probe -l
probe_perf:dso__load_vmlinux (on 0x000000000006d2b4)
---
Now the problem is fixed.
Note: This bug is introduced by
commit fb7345bbf7fad9bf72ef63a19c707970b9685812
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: "David A. Long" <dave.long@linaro.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: yrl.pp-manager.tt@hitachi.com
Link: http://lkml.kernel.org/r/20140205051858.6519.27314.stgit@kbuild-fedora.yrl.intra.hitachi.co.jp
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Commit aa9c2669626c (NFS: Client implementation of Labeled-NFS) introduces
a performance regression. When nfs_zap_caches_locked is called, it sets
the NFS_INO_INVALID_LABEL flag irrespectively of whether or not the
NFS server supports security labels. Since that flag is never cleared,
it means that all calls to nfs_revalidate_inode() will now trigger
an on-the-wire GETATTR call.
This patch ensures that we never set the NFS_INO_INVALID_LABEL unless the
server advertises support for labeled NFS.
It also causes nfs_setsecurity() to clear NFS_INO_INVALID_LABEL when it
has successfully set the security label for the inode.
Finally it gets rid of the NFS_INO_INVALID_LABEL cruft from nfs_update_inode,
which has nothing to do with labeled NFS.
Reported-by: Neil Brown <neilb@suse.de>
Cc: stable@vger.kernel.org # 3.11+
Tested-by: Neil Brown <neilb@suse.de>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
Currently the I2C device Ids conflict for the MFD and CODEC so
cannot be both instantiated on one platform. This patch updates
the Ids and names to make them unique from each other.
It should be noted that the I2C addresses for both PMIC and CODEC
are modifiable so instantiation of the two are kept as separate
devices, rather than instantiating the CODEC from the MFD code.
Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Acked-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Mark Brown <broonie@linaro.org>
Cc: stable@vger.kernel.org
|
|
Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com>
Acked-by: Nicolin Chen <Guangyu.Chen@freescale.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
|
|
The commit 1abe729 (ASoC: fsl: Add missing pm to current machine
drivers) enables pm support for a few IMX machine drivers. But it does
not update dev drvdata to be the pointer to 'card'. This causes the
kernel dump below in system suspend, because snd_soc_suspend() expects
that the dev drvdata points to 'card', while it still points to the
private data of machine driver.
This patch fixes imx-sgtl5000 and imx-wm8962 by attaching 'card' to dev
drvdata and private data to card drvdata. For imx-mc13783, I simply
revert the pm change because it must be broken for the same reason and
I don't have hardware to test pm enabling code.
$ echo mem > /sys/power/state
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
mmc1: card e624 removed
Freezing user space processes ... (elapsed 0.002 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done.
PM: Entering mem sleep
INFO: trying to register non-static key.
the code is fine but needs lockdep annotation.
turning off the locking correctness validator.
CPU: 0 PID: 1861 Comm: bash Not tainted 3.14.0-rc1+ #1648
Backtrace:
[<80012144>] (dump_backtrace) from [<800122e4>] (show_stack+0x18/0x1c)
r6:8079c77c r5:00000c5a r4:00000000 r3:00000000
[<800122cc>] (show_stack) from [<80637ac0>] (dump_stack+0x78/0x94)
[<80637a48>] (dump_stack) from [<80028918>] (warn_slowpath_common+0x6c/0x8c)
r4:bdb21c38 r3:be62df00
[<800288ac>] (warn_slowpath_common) from [<800289dc>] (warn_slowpath_fmt+0x38/0x40)
r8:be62e3a8 r7:bf122960 r6:00000005 r5:00000000 r4:00000000
[<800289a8>] (warn_slowpath_fmt) from [<8006518c>] (__lock_acquire+0x1ae0/0x1ce0)
r3:8079d598 r2:80799e70
[<800636ac>] (__lock_acquire) from [<80065894>] (lock_acquire+0x68/0x7c)
r10:bdb20000 r9:be62df00 r8:00000000 r7:00000000 r6:60000013 r5:bdb20000
r4:00000000
[<8006582c>] (lock_acquire) from [<8063c938>] (mutex_lock_nested+0x5c/0x3b8)
r7:00000000 r6:80dfc78c r5:804be444 r4:bf122928
[<8063c8dc>] (mutex_lock_nested) from [<804be444>] (snd_soc_suspend+0x34/0x42c)
r10:00000000 r9:00000000 r8:00000000 r7:bf1c4444 r6:bf1c4410 r5:be978150
r4:be978010
[<804be410>] (snd_soc_suspend) from [<8034392c>] (platform_pm_suspend+0x34/0x64)
r10:00000000 r8:00000000 r7:bf1c4444 r6:bf1c4410 r5:803438f8 r4:bf1c4410
[<803438f8>] (platform_pm_suspend) from [<80348e18>] (dpm_run_callback.isra.7+0x34/0x6c)
[<80348de4>] (dpm_run_callback.isra.7) from [<80349354>] (__device_suspend+0x10c/0x220)
r9:808dd974 r8:808c4a5c r6:00000002 r5:80e5001c r4:bf1c4410
[<80349248>] (__device_suspend) from [<8034a338>] (dpm_suspend+0x60/0x220)
r7:bf1c4410 r6:808dd90c r5:80e5001c r4:bf1c44c0
[<8034a2d8>] (dpm_suspend) from [<8034a790>] (dpm_suspend_start+0x60/0x68)
r10:8079a818 r9:00000000 r8:00000004 r7:80dfbe90 r6:80641eec r5:00000000
r4:00000002
[<8034a730>] (dpm_suspend_start) from [<8006a788>] (suspend_devices_and_enter+0x74/0x318)
r4:00000003 r3:80dfbe98
[<8006a714>] (suspend_devices_and_enter) from [<8006abd8>] (pm_suspend+0x1ac/0x244)
r10:8079a818 r8:00000004 r7:00000003 r6:80641eec r5:00000000 r4:00000003
[<8006aa2c>] (pm_suspend) from [<80069a4c>] (state_store+0x70/0xc0)
r5:00000003 r4:bd85ea40
[<800699dc>] (state_store) from [<80294034>] (kobj_attr_store+0x1c/0x28)
r10:beb9fe08 r8:00000000 r7:bdb21f78 r6:bd85ea40 r5:00000004 r4:beb9fe00
[<80294018>] (kobj_attr_store) from [<80140f90>] (sysfs_kf_write+0x54/0x58)
[<80140f3c>] (sysfs_kf_write) from [<8014474c>] (kernfs_fop_write+0xc4/0x160)
r6:bd85ea40 r5:beb9fe00 r4:00000004 r3:80140f3c
[<80144688>] (kernfs_fop_write) from [<800dfa14>] (vfs_write+0xbc/0x184)
r10:00000000 r9:00000000 r8:00000000 r7:bdb21f78 r6:00500c08 r5:00000004
r4:be782600
[<800df958>] (vfs_write) from [<800dfe00>] (SyS_write+0x48/0x70)
r10:00000000 r8:00000000 r7:00000004 r6:00500c08 r5:00000000 r4:be782600
[<800dfdb8>] (SyS_write) from [<8000e800>] (ret_fast_syscall+0x0/0x48)
r9:bdb20000 r8:8000e9c4 r7:00000004 r6:00500c08 r5:00000004 r4:76eb65e0
Fixes: 1abe729 (ASoC: fsl: Add missing pm to current machine drivers)
Cc: stable@vger.kernel.org
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Mark Brown <broonie@linaro.org>
|
|
After commit 202317a573b2 (ACPI / scan: Add acpi_device objects for
all device nodes in the namespace) acpi_bus_get_device() will always
return 0 for dock devices in dock_notify(), so the dock station
docking code under ACPI_NOTIFY_DEVICE_CHECK will never be executed
and docking will not work as a result of that.
Fix the problem by making dock_notify() use acpi_device_enumerated()
to check the presence of the device instead of checking the return
value of acpi_bus_get_device().
Fixes: 202317a573b2 (ACPI / scan: Add acpi_device objects for all device nodes in the namespace)
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
When unlocking a spinlock, we require the following, strictly ordered
sequence of events:
<barrier> /* dmb */
<unlock>
<barrier> /* dsb */
<sev>
Whilst the code does indeed reflect this in terms of the architecture,
the final <barrier> + <sev> have been contracted into a single inline
asm without a "memory" clobber, therefore the compiler is at liberty to
reorder the unlock to the end of the above sequence. In such a case,
a waiting CPU may be woken up before the lock has been unlocked, leading
to extremely poor performance.
This patch reworks the dsb_sev() function to make use of the dsb()
macro and ensure ordering against the unlock.
Cc: <stable@vger.kernel.org>
Reported-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
During __v{6,7}_setup, we invalidate the TLBs since we are about to
enable the MMU on return to head.S. Unfortunately, without a subsequent
dsb instruction, the invalidation is not guaranteed to have completed by
the time we write to the sctlr, potentially exposing us to junk/stale
translations cached in the TLB.
This patch reworks the init functions so that the dsb used to ensure
completion of cache/predictor maintenance is also used to ensure
completion of the TLB invalidation.
Cc: <stable@vger.kernel.org>
Reported-by: Albin Tonnerre <Albin.Tonnerre@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
Commit ad6492b8 added much needed memblock_virt_alloc_low() and further
commit 07bacb3 {memblock, bootmem: restore goal for alloc_low} fixed
the issue with low memory limit thanks to Yinghai. But even after all
these fixes, there is still one case where the limit check done with
ARCH_LOW_ADDRESS_LIMIT for low memory fails. Russell pointed out the
issue with 32 bit LPAE machines in below thread.
https://lkml.org/lkml/2014/1/28/364
Since on some LPAE machines where memory start address is beyond 4GB,
the low memory marker in memblock will be set to default
ARCH_LOW_ADDRESS_LIMIT which is wrong. We can fix this by letting
architectures set the ARCH_LOW_ADDRESS_LIMIT using another export
similar to memblock_set_current_limit() but am not sure whether
its worth the trouble. Tell me if you think otherwise.
Rather am just trying to fix that one broken case using
memblock_virt_alloc() in setup code since the memblock.current_limit
is updated appropriately makes it work on all ARM 32 bit machines.
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Strashko, Grygorii <grygorii.strashko@ti.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
The stage-2 memory attributes are distinct from the Hyp memory
attributes and the Stage-1 memory attributes. We were using the stage-1
memory attributes for stage-2 mappings causing device mappings to be
mapped as normal memory. Add the S2 equivalent defines for memory
attributes and fix the comments explaining the defines while at it.
Add a prot_pte_s2 field to the mem_type struct and fill out the field
for device mappings accordingly.
Cc: <stable@vger.kernel.org> [3.9+]
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
Even after the fix for leftover kconfig handling (commit f8f1becf),
the current code still doesn't handle properly the builtin/module
mixup case between the core snd-hda-codec and other codec drivers.
For example, when CONFIG_SND_HDA_INTEL=y and
CONFIG_SND_HDA_CODEC_HDMI=m, it'll end up with an unresolved symbol
snd_hda_parse_hdmi_codec. This patch fixes the issue.
Now codec->parser points to the parser object *only* when a module
(either generic or HDMI parser) is loaded and bound. When a builtin
symbol is used, codec->parser still points to NULL. This is the
difference from the previous versions.
Fixes: f8f1becfa4ac ('ALSA: hda - Fix leftover ifdef checks after modularization')
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Correct a typo causing the stack protector to be left enabled.
0xFFFFFFF -> 0xFFFFFFFF
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
|
Some drivers check if readq/writeq functions are defined.
If not internal driver functions are used which cause
compilation failures.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
|
Add missing param.h header because of HZ macro.
It is causing compilation failure:
In file included from include/linux/delay.h:14:0,
from drivers/clk/qcom/reset.c:18:
drivers/clk/qcom/reset.c: In function 'qcom_reset':
arch/microblaze/include/asm/delay.h:39:35: error: 'HZ'
undeclared (first use in this function)
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
|
As far as I can tell we have used a default of 60 seconds for
FIN_WAIT2 timeout for ages (since 2.x times??).
In any case, the timeout these days is 60 seconds, so the 3 min
comment is wrong (and cost me a few minutes of my life when I was
debugging a FIN_WAIT2 related problem in a userspace application and
checked the kernel source for details).
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Remove occurrences of unused struct __vxge_hw_device pointer in functions
vxge_learn_mac() and vxge_rem_isr().
Detected by Coverity: CID 139839, CID 139842.
Signed-off-by: Christian Engelmayer <cengelma@gmx.at>
Reviewed-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The driver description files give these descriptions to the vendor specific
ports on this modem:
VID_19D2&PID_1270&MI_00: "ZTE MF667 Diagnostics Port"
VID_19D2&PID_1270&MI_01: "ZTE MF667 AT Port"
VID_19D2&PID_1270&MI_02: "ZTE MF667 ATExt2 Port"
VID_19D2&PID_1270&MI_03: "ZTE MF667 ATExt Port"
VID_19D2&PID_1270&MI_04: "ZTE MF667 USB Modem"
VID_19D2&PID_1270&MI_05: "ZTE MF667 Network Adapter"
Signed-off-by: Raymond Wanyoike <raymond.wanyoike@gmail.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Remove unused network device private data pointer 'vp' in function
vortex_eisa_cleanup(). Detected by Coverity: CID 139826.
Signed-off-by: Christian Engelmayer <cengelma@gmx.at>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
ip rules with iif/oif references do not update:
(detach/attach) across interface renames.
Signed-off-by: Maciej Żenczykowski <maze@google.com>
CC: Willem de Bruijn <willemb@google.com>
CC: Eric Dumazet <edumazet@google.com>
CC: Chris Davis <chrismd@google.com>
CC: Carlo Contavalli <ccontavalli@google.com>
Google-Bug-Id: 12936021
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Remove occurrences of unused pointer to network device private data in
functions dlci_header() and dlci_receive().
Detected by Coverity: CID 139844, CID 139845.
Signed-off-by: Christian Engelmayer <cengelma@gmx.at>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit 8df8c56a (6lowpan: Moving generic compression code into 6lowpan_iphc.c)
left pointer 'hdr' unused - remove it.
Detected by Coverity: CID 1164868.
Signed-off-by: Christian Engelmayer <cengelma@gmx.at>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull SELinux fixes from James Morris.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
SELinux: Fix kernel BUG on empty security contexts.
selinux: add SOCK_DIAG_BY_FAMILY to the list of netlink message types
|
|
The patch 446fab59333dea91e54688f033dd8d788d0486fb ("ipv6: enable anycast addresses
as source addresses in ICMPv6 error messages") causes an Oops when pinging a not
set up IPv6 peer on a sit tunnel.
The problem is that ipv6_anycast_destination() uses unconditionally skb_dst(skb),
which is NULL in this case.
The solution is to use instead the ipv6_chk_acast_addr_src() function.
Here are the steps to reproduce it:
modprobe sit
ip link add sit1 type sit remote 10.16.0.121 local 10.16.0.249
ip l s sit1 up
ip -6 a a dev sit1 2001:1234::123 remote 2001:1234::121
ping6 2001:1234::121
Reported-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Tested-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Francois-Xavier Le Bail <fx.lebail@yahoo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs fixes from Al Viro:
"A couple of fixes, both -stable fodder. The O_SYNC bug is fairly
old..."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fix a kmap leak in virtio_console
fix O_SYNC|O_APPEND syncing the wrong range on write()
|
|
Mark functions as static in net/sunrpc/svc_xprt.c because they are not
used outside this file.
This eliminates the following warning in net/sunrpc/svc_xprt.c:
net/sunrpc/svc_xprt.c:574:5: warning: no previous prototype for ‘svc_alloc_arg’ [-Wmissing-prototypes]
net/sunrpc/svc_xprt.c:615:18: warning: no previous prototype for ‘svc_get_next_xprt’ [-Wmissing-prototypes]
net/sunrpc/svc_xprt.c:694:6: warning: no previous prototype for ‘svc_add_new_temp_xprt’ [-Wmissing-prototypes]
Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
