summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-03-16net: dsa: mv88e6xxx: Fix binding documentation for MDIO bussesAndrew Lunn
The MDIO busses are switch properties and so should be inside the switch node. Fix the examples in the binding document. Reported-by: 尤晓杰 <yxj790222@163.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Fixes: a3c53be55c95 ("net: dsa: mv88e6xxx: Support multiple MDIO busses") Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-16skbuff: Fix not waking applications when errors are enqueuedVinicius Costa Gomes
When errors are enqueued to the error queue via sock_queue_err_skb() function, it is possible that the waiting application is not notified. Calling 'sk->sk_data_ready()' would not notify applications that selected only POLLERR events in poll() (for example). Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: Randy E. Witt <randy.e.witt@intel.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-16netlink: avoid a double skb free in genlmsg_mcast()Nicolas Dichtel
nlmsg_multicast() consumes always the skb, thus the original skb must be freed only when this function is called with a clone. Fixes: cb9f7a9a5c96 ("netlink: ensure to loop over all netns in genlmsg_multicast_allns()") Reported-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-16drm: Make drm_mode_vrefresh() a bit more accurateVille Syrjälä
Do the refresh rate calculation with a single division. This gives us slightly more accurate results, especially for interlaced since we don't just double the final truncated result. We do lose one bit compared to the old way, so with an interlaced mode the new code can only handle ~2GHz instead of the ~4GHz the old code handeled. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180313150759.27620-2-ville.syrjala@linux.intel.com Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2018-03-16drm: Nuke the useless 'ret' variable from drm_mode_convert_umode()Ville Syrjälä
No need to store the return value in a variable since we don't have to do any unwinding. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180313150759.27620-1-ville.syrjala@linux.intel.com Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2018-03-16qede: Fix qedr link updateMichal Kalderon
Link updates were not reported to qedr correctly. Leading to cases where a link could be down, but qedr would see it as up. In addition, once qede was loaded, link state would be up, regardless of the actual link state. Signed-off-by: Michal Kalderon <michal.kalderon@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-16Merge branch 'qed-iWARP-related-fixes'David S. Miller
Michal Kalderon says: ==================== qed: iWARP related fixes This series contains two fixes related to iWARP flow. ==================== Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
2018-03-16qed: Fix non TCP packets should be dropped on iWARP ll2 connectionMichal Kalderon
FW workaround. The iWARP LL2 connection did not expect TCP packets to arrive on it's connection. The fix drops any non-tcp packets Fixes b5c29ca ("qed: iWARP CM - setup a ll2 connection for handling SYN packets") Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-16qed: Fix MPA unalign flow in case header is split across two packets.Michal Kalderon
There is a corner case in the MPA unalign flow where a FPDU header is split over two tcp segments. The length of the first fragment in this case was not initialized properly and should be '1' Fixes: c7d1d839 ("qed: Add support for MPA header being split over two tcp packets") Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-16net/iucv: Free memory obtained by kzallocArvind Yadav
Free memory by calling put_device(), if afiucv_iucv_init is not successful. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-16net: systemport: Rewrite __bcm_sysport_tx_reclaim()Florian Fainelli
There is no need for complex checking between the last consumed index and current consumed index, a simple subtraction will do. This also eliminates the possibility of a permanent transmit queue stall under the following conditions: - one CPU bursts ring->size worth of traffic (up to 256 buffers), to the point where we run out of free descriptors, so we stop the transmit queue at the end of bcm_sysport_xmit() - because of our locking, we have the transmit process disable interrupts which means we can be blocking the TX reclamation process - when TX reclamation finally runs, we will be computing the difference between ring->c_index (last consumed index by SW) and what the HW reports through its register - this register is masked with (ring->size - 1) = 0xff, which will lead to stripping the upper bits of the index (register is 16-bits wide) - we will be computing last_tx_cn as 0, which means there is no work to be done, and we never wake-up the transmit queue, leaving it permanently disabled A practical example is e.g: ring->c_index aka last_c_index = 12, we pushed 256 entries, HW consumer index = 268, we mask it with 0xff = 12, so last_tx_cn == 0, nothing happens. Fixes: 80105befdb4b ("net: systemport: add Broadcom SYSTEMPORT Ethernet MAC driver") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-16kcm: lock lower socket in kcm_attachTom Herbert
Need to lock lower socket in order to provide mutual exclusion with kcm_unattach. v2: Add Reported-by for syzbot Fixes: ab7ac4eb9832e32a09f4e804 ("kcm: Kernel Connection Multiplexor module") Reported-by: syzbot+ea75c0ffcd353d32515f064aaebefc5279e6161e@syzkaller.appspotmail.com Signed-off-by: Tom Herbert <tom@quantonium.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-16Merge branch 'vlan-untag-and-insert-fixes'David S. Miller
Toshiaki Makita says: ==================== Fix vlan untag and insertion for bridge and vlan with reorder_hdr off As Brandon Carpenter reported[1], sending non-vlan-offloaded packets from bridge devices ends up with corrupted packets. He narrowed down this problem and found that the root cause is in skb_reorder_vlan_header(). While I was working on fixing this problem, I found that the function does not work properly for double tagged packets with reorder_hdr off as well. Patch 1 fixes these 2 problems in skb_reorder_vlan_header(). And it turned out that fixing skb_reorder_vlan_header() is not sufficient to receive double tagged packets with reorder_hdr off while I was testing the fix. Vlan tags got out of order when vlan devices with reorder_hdr disabled were stacked. Patch 2 fixes this problem. [1] https://www.spinics.net/lists/linux-ethernet-bridging/msg07039.html ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-16vlan: Fix out of order vlan headers with reorder header offToshiaki Makita
With reorder header off, received packets are untagged in skb_vlan_untag() called from within __netif_receive_skb_core(), and later the tag will be inserted back in vlan_do_receive(). This caused out of order vlan headers when we create a vlan device on top of another vlan device, because vlan_do_receive() inserts a tag as the outermost vlan tag. E.g. the outer tag is first removed in skb_vlan_untag() and inserted back in vlan_do_receive(), then the inner tag is next removed and inserted back as the outermost tag. This patch fixes the behaviour by inserting the inner tag at the right position. Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-16net: Fix vlan untag for bridge and vlan_dev with reorder_hdr offToshiaki Makita
When we have a bridge with vlan_filtering on and a vlan device on top of it, packets would be corrupted in skb_vlan_untag() called from br_dev_xmit(). The problem sits in skb_reorder_vlan_header() used in skb_vlan_untag(), which makes use of skb->mac_len. In this function mac_len is meant for handling rx path with vlan devices with reorder_header disabled, but in tx path mac_len is typically 0 and cannot be used, which is the problem in this case. The current code even does not properly handle rx path (skb_vlan_untag() called from __netif_receive_skb_core()) with reorder_header off actually. In rx path single tag case, it works as follows: - Before skb_reorder_vlan_header() mac_header data v v +-------------------+-------------+------+---- | ETH | VLAN | ETH | | ADDRS | TPID | TCI | TYPE | +-------------------+-------------+------+---- <-------- mac_len ---------> <-------------> to be removed - After skb_reorder_vlan_header() mac_header data v v +-------------------+------+---- | ETH | ETH | | ADDRS | TYPE | +-------------------+------+---- <-------- mac_len ---------> This is ok, but in rx double tag case, it corrupts packets: - Before skb_reorder_vlan_header() mac_header data v v +-------------------+-------------+-------------+------+---- | ETH | VLAN | VLAN | ETH | | ADDRS | TPID | TCI | TPID | TCI | TYPE | +-------------------+-------------+-------------+------+---- <--------------- mac_len ----------------> <-------------> should be removed <---------------------------> actually will be removed - After skb_reorder_vlan_header() mac_header data v v +-------------------+------+---- | ETH | ETH | | ADDRS | TYPE | +-------------------+------+---- <--------------- mac_len ----------------> So, two of vlan tags are both removed while only inner one should be removed and mac_header (and mac_len) is broken. skb_vlan_untag() is meant for removing the vlan header at (skb->data - 2), so use skb->data and skb->mac_header to calculate the right offset. Reported-by: Brandon Carpenter <brandon.carpenter@cypherpath.com> Fixes: a6e18ff11170 ("vlan: Fix untag operations of stacked vlans with REORDER_HEADER off") Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-16Revert "btrfs: use proper endianness accessors for super_copy"David Sterba
This reverts commit 3c181c12c431fe33b669410d663beb9cceefcd1b. The offending patch was merged in 4.16-rc4 and was promptly applied to stable kernels 4.14.25 and 4.15.8. The patch causes a corruption in several superblock items on big-endian machines because of messed up endianity conversions. The damage is manually repairable. A filesystem cannot be mounted again after it has been unmounted once. We do a full revert and not a fixup so stable can pick that patch ASAP. Fixes: 3c181c12c431 ("btrfs: use proper endianness accessors for super_copy") Link: https://lkml.kernel.org/r/1521139304@msgid.manchmal.in-ulm.de CC: stable@vger.kernel.org # 4.14+ Reported-by: Christoph Biedl <linux-kernel.bfrz@manchmal.in-ulm.de> Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-16drm/i915: Use drm_color_lut_size()Ville Syrjälä
Avoid all the sizeof(drm_color_lut) business by using drm_color_lut_size() to convert the blob length into number of LUT entries. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180223192506.29992-6-ville.syrjala@linux.intel.com Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2018-03-16drm/i915: Remove the blob->data castsVille Syrjälä
Now that blob->data is void* again we don't need to cast it. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180223192506.29992-5-ville.syrjala@linux.intel.com Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2018-03-16drm: Introduce drm_color_lut_size()Ville Syrjälä
Provide a small helper to convert the blob length in bytes to the number of LUT entries. v2: Add kerneldoc (Daniel) Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20180315152338.7248-1-ville.syrjala@linux.intel.com
2018-03-16drm: Verify gamma/degamma LUT sizeVille Syrjälä
While we want to potentially support multiple different gamma/degamma LUT sizes we can (and should) at least check that the blob length is a multiple of the LUT entry size. v2: s/expected_size_mod/expected_elem_size/ (Daniel) Add kernel doc (Daniel) v3: s/we/were/ typo in the docs Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20180315152241.7113-1-ville.syrjala@linux.intel.com
2018-03-16drm: Remove now pointelss blob->data castsVille Syrjälä
Now that blob->data is void* again we don't need the casts anymore. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180223192506.29992-2-ville.syrjala@linux.intel.com Reviewed-by: Shashank Sharma <shashank.sharma@intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2018-03-16Revert "drm: Use a flexible array member for blob property data"Ville Syrjälä
Using a flexible array for the blob data was a mistake by me. It forces all users of the blob data to cast blob->data to something else. void* is clearly superior so let's go back to the original scheme. Not a clean revert as the code has moved. This reverts commit d63f5e6bf6f2a1573ea39c9937cdf5ab0b3a4b77. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180223192506.29992-1-ville.syrjala@linux.intel.com Reviewed-by: Shashank Sharma <shashank.sharma@intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2018-03-16KVM: x86: Fix device passthrough when SME is activeTom Lendacky
When using device passthrough with SME active, the MMIO range that is mapped for the device should not be mapped encrypted. Add a check in set_spte() to insure that a page is not mapped encrypted if that page is a device MMIO page as indicated by kvm_is_mmio_pfn(). Cc: <stable@vger.kernel.org> # 4.14.x- Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-03-16drm/i915/pmu: Work around compiler warnings on some kernel configsTvrtko Ursulin
Arnd Bergman reports: """ The conditional spinlock confuses gcc into thinking the 'flags' value might contain uninitialized data: drivers/gpu/drm/i915/i915_pmu.c: In function '__i915_pmu_event_read': arch/x86/include/asm/paravirt_types.h:573:3: error: 'flags' may be used uninitialized in this function [-Werror=maybe-uninitialized] The code is correct, but it's easy to see how the compiler gets confused here. This avoids the problem by pulling the lock outside of the function into its only caller. """ On deeper look it seems this is caused by paravirt spinlocks implementation when CONFIG_PARAVIRT_DEBUG is set, which by being complicated, manages to convince gcc locked parameter can be changed externally (impossible). Work around it by removing the conditional locking parameters altogether. (It was never the most elegant code anyway.) Slight penalty we now pay is an additional irqsave spin lock/unlock cycle on the event enable path. But since enable is not a fast path, that is preferrable to the alternative solution which was doing MMIO under irqsave spinlock. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reported-by: Arnd Bergmann <arnd@arndb.de> Fixes: 1fe699e30113 ("drm/i915/pmu: Fix sleep under atomic in RC6 readout") Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Imre Deak <imre.deak@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: David Airlie <airlied@linux.ie> Cc: intel-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20180314080535.17490-1-tvrtko.ursulin@linux.intel.com (cherry picked from commit ad055fb8e010e4ff37f66aeed1d380329bddce67) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2018-03-16drm/i915: Only call tasklet_kill() on the first prepare_resetChris Wilson
tasklet_kill() will spin waiting for the current tasklet to be executed. However, if tasklet_disable() has been called, then the tasklet is never executed but permanently put back onto the runlist until tasklet_enable() is called. Ergo, we cannot use tasklet_kill() inside a disable/enable pair. This is the case when we call set-wedge from inside i915_reset(), and another request was submitted to us concurrent to the reset. Fixes: 963ddd63c314 ("drm/i915: Suspend submission tasklets around wedging") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180307134226.25492-6-chris@chris-wilson.co.uk (cherry picked from commit 68ad361285a9cc73b259f59adbaafde196c15987) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2018-03-16drm/i915: Wrap engine->schedule in RCU locks for set-wedge protectionChris Wilson
Similar to the staging around handling of engine->submit_request, we need to stop adding to the execlists->queue prior to calling engine->cancel_requests. cancel_requests will move requests from the queue onto the timeline, so if we add a request onto the queue after that point, it will be lost. Fixes: af7a8ffad9c5 ("drm/i915: Use rcu instead of stop_machine in set_wedged") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180307134226.25492-5-chris@chris-wilson.co.uk (cherry picked from commit 47650db02dd52267953df81438c93cf8a0eb0e5e) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2018-03-16drm/i915/icl: do not save DDI A/E sharing bit for ICLJani Nikula
We don't want to preserve the DDI A 4 lane bit on ICL. Fixes: 3d2011cfa41f ("drm/i915/icl: remove port A/E lane sharing limitation.") Cc: Mahesh Kumar <mahesh1.kumar@intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180306104155.3526-1-jani.nikula@intel.com (cherry picked from commit 1e6aa7e55c28ecd842b8b4599e4273c2429ee061) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2018-03-16microblaze: switch to NO_BOOTMEMRob Herring
Microblaze doesn't set CONFIG_NO_BOOTMEM and so memblock_virt_alloc() doesn't work for CONFIG_HAVE_MEMBLOCK && !CONFIG_NO_BOOTMEM. Similar change was already done by others architectures "ARM: mm: Remove bootmem code and switch to NO_BOOTMEM" (sha1: 84f452b1e8fc73ac0e31254c66e3e2260ce5263d) or "openrisc: Consolidate setup to use memblock instead of bootmem" (sha1: 266c7fad157265bb54d17db1c9545f2aaa488643) or "parisc: Drop bootmem and switch to memblock" (sha1: 4fe9e1d957e45ad8eba9885ee860a0e93d13a7c7) or "powerpc: Remove bootmem allocator" (sha1: 10239733ee8617bac3f1c1769af43a88ed979324) or "s390/mm: Convert bootmem to memblock" (sha1: 50be634507284eea38df78154d22615d21200b42) or "sparc64: Convert over to NO_BOOTMEM." (sha1: 625d693e9784f988371e69c2b41a2172c0be6c11) or "xtensa: drop sysmem and switch to memblock" (sha1: 0e46c1115f5816949220d62dd3ff04aa68e7ac6b) Issue was introduced by: "of/fdt: use memblock_virt_alloc for early alloc" (sha1: 0fa1c579349fdd90173381712ad78aa99c09d38b) Signed-off-by: Rob Herring <robh@kernel.org> Tested-by: Alvaro Gamez Machado <alvaro.gamez@hazent.com> Tested-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-03-16microblaze: remove unused alloc_maybe_bootmemRob Herring
alloc_maybe_bootmem is unused, so remove it. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-03-16microblaze: Setup dependencies for ASM optimized lib functionsMichal Simek
The patch: "microblaze: Setup proper dependency for optimized lib functions" (sha1: 7b6ce52be3f86520524711a6f33f3866f9339694) didn't setup all dependencies properly. Optimized lib functions in C are also present for little endian and optimized library functions in assembler are implemented only for big endian version. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-03-16x86/speculation: Remove Skylake C2 from Speculation Control microcode blacklistAlexander Sergeyev
In accordance with Intel's microcode revision guidance from March 6 MCU rev 0xc2 is cleared on both Skylake H/S and Skylake Xeon E3 processors that share CPUID 506E3. Signed-off-by: Alexander Sergeyev <sergeev917@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Jia Zhang <qianyue.zj@alibaba-inc.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Kyle Huey <me@kylehuey.com> Cc: David Woodhouse <dwmw@amazon.co.uk> Link: https://lkml.kernel.org/r/20180313193856.GA8580@localhost.localdomain
2018-03-16drm/rockchip: cdn-dp: remove the DP phy switchChris Zhong
There are 2 Type-c PHYs in RK3399, but only one DP controller. Hence only one PHY can connect to DP controller at one time, the other should be disconnected. The GRF_SOC_CON26 register has a switch bit to do it, set this bit means enable PHY 1, clear this bit means enable PHY 0. If the board has 2 Type-C ports, the DP driver get the phy id from devm_of_phy_get_by_index, and then control this switch according to this id. But some others board only has one Type-C port, it may be PHY 0 or PHY 1. The dts node id can not tell us the correct PHY id. Hence move this switch to PHY driver, the PHY driver can distinguish between PHY 0 and PHY 1, and then write the correct register bit. Signed-off-by: Chris Zhong <zyw@rock-chips.com> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> [The phy-changes are in the phy-tree now and the cdn-dp wasn't enabled at all so far, so this change can go through drm-misc alone without causing issues when testing drm-misc] Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20180216120956.19034-6-enric.balletbo@collabora.com
2018-03-16drm: Reduce object size of DRM_ERROR and DRM_DEBUG usesJoe Perches
drm_printk is used for both DRM_ERROR and DRM_DEBUG with unnecessary arguments that can be removed by creating separate functins. Create specific functions for these calls to reduce x86/64 defconfig size by ~20k. Modify the existing macros to use the specific calls. new: $ size -t drivers/gpu/drm/built-in.a | tail -1 1876562 44542 995 1922099 1d5433 (TOTALS) old: $ size -t drivers/gpu/drm/built-in.a | tail -1 1897565 44542 995 1943102 1da63e (TOTALS) Miscellanea: o intel_display requires a change to use the specific calls. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/016b5cb84cede20fd0f91ed6965421d99fd5f2ce.1520978414.git.joe@perches.com
2018-03-16mmc: dw_mmc: fix falling from idmac to PIO mode when dw_mci_reset occursEvgeniy Didin
It was found that in IDMAC mode after soft-reset driver switches to PIO mode. That's what happens in case of DTO timeout overflow calculation failure: 1. soft-reset is called 2. driver restarts dma 3. descriptors states are checked, one of descriptor is owned by the IDMAC. 4. driver can't use DMA and then switches to PIO mode. Failure was already fixed in: https://www.spinics.net/lists/linux-mmc/msg48125.html. Behaviour while soft-reset is not something we except or even want to happen. So we switch from dw_mci_idmac_reset to dw_mci_idmac_init, so descriptors are cleaned before starting dma. And while at it explicitly zero des0 which otherwise might contain garbage as being allocated by dmam_alloc_coherent(). Signed-off-by: Evgeniy Didin <Evgeniy.Didin@synopsys.com> Cc: Jaehoon Chung <jh80.chung@samsung.com> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Cc: Shawn Lin <shawn.lin@rock-chips.com> Cc: Alexey Brodkin <abrodkin@synopsys.com> Cc: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Cc: linux-snps-arc@lists.infradead.org Cc: <stable@vger.kernel.org> # 4.4+ Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-03-16Merge tag 'drm-intel-fixes-2018-03-15' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes Only GVT fixes: - Two warnings fix for runtime pm and usr copy (Xiong, Zhenyu) - OA context fix for vGPU profiling (Min) - privilege batch buffer reloc fix (Fred) * tag 'drm-intel-fixes-2018-03-15' of git://anongit.freedesktop.org/drm/drm-intel: drm/i915/gvt: fix user copy warning by whitelist workload rb_tail field drm/i915/gvt: Correct the privilege shadow batch buffer address drm/i915/gvt: keep oa config in shadow ctx drm/i915/gvt: Add runtime_pm_get/put into gvt_switch_mmio
2018-03-15acpi, numa: fix pxm to online numa node associationsDan Williams
Commit 99759869faf1 "acpi: Add acpi_map_pxm_to_online_node()" added support for mapping a given proximity to its nearest, by SLIT distance, online node. However, it sometimes returns unexpected results due to the fact that it switches from comparing the PXM node to the last node that was closer than the current max. for_each_online_node(n) { dist = node_distance(node, n); if (dist < min_dist) { min_dist = dist; node = n; <---- from this point we're using the wrong node for node_distance() Fixes: 99759869faf1 ("acpi: Add acpi_map_pxm_to_online_node()") Cc: <stable@vger.kernel.org> Reviewed-by: Toshi Kani <toshi.kani@hp.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-03-15RDMA/ucma: Check AF family prior resolving addressLeon Romanovsky
Garbage supplied by user will cause to UCMA module provide zero memory size for memcpy(), because it wasn't checked, it will produce unpredictable results in rdma_resolve_addr(). [ 42.873814] BUG: KASAN: null-ptr-deref in rdma_resolve_addr+0xc8/0xfb0 [ 42.874816] Write of size 28 at addr 00000000000000a0 by task resaddr/1044 [ 42.876765] [ 42.876960] CPU: 1 PID: 1044 Comm: resaddr Not tainted 4.16.0-rc1-00057-gaa56a5293d7e #34 [ 42.877840] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.0-0-g63451fca13-prebuilt.qemu-project.org 04/01/2014 [ 42.879691] Call Trace: [ 42.880236] dump_stack+0x5c/0x77 [ 42.880664] kasan_report+0x163/0x380 [ 42.881354] ? rdma_resolve_addr+0xc8/0xfb0 [ 42.881864] memcpy+0x34/0x50 [ 42.882692] rdma_resolve_addr+0xc8/0xfb0 [ 42.883366] ? deref_stack_reg+0x88/0xd0 [ 42.883856] ? vsnprintf+0x31a/0x770 [ 42.884686] ? rdma_bind_addr+0xc40/0xc40 [ 42.885327] ? num_to_str+0x130/0x130 [ 42.885773] ? deref_stack_reg+0x88/0xd0 [ 42.886217] ? __read_once_size_nocheck.constprop.6+0x10/0x10 [ 42.887698] ? unwind_get_return_address_ptr+0x50/0x50 [ 42.888302] ? replace_slot+0x147/0x170 [ 42.889176] ? delete_node+0x12c/0x340 [ 42.890223] ? __radix_tree_lookup+0xa9/0x160 [ 42.891196] ? ucma_resolve_ip+0xb7/0x110 [ 42.891917] ucma_resolve_ip+0xb7/0x110 [ 42.893003] ? ucma_resolve_addr+0x190/0x190 [ 42.893531] ? _copy_from_user+0x5e/0x90 [ 42.894204] ucma_write+0x174/0x1f0 [ 42.895162] ? ucma_resolve_route+0xf0/0xf0 [ 42.896309] ? dequeue_task_fair+0x67e/0xd90 [ 42.897192] ? put_prev_entity+0x7d/0x170 [ 42.897870] ? ring_buffer_record_is_on+0xd/0x20 [ 42.898439] ? tracing_record_taskinfo_skip+0x20/0x50 [ 42.899686] __vfs_write+0xc4/0x350 [ 42.900142] ? kernel_read+0xa0/0xa0 [ 42.900602] ? firmware_map_remove+0xdf/0xdf [ 42.901135] ? do_task_dead+0x5d/0x60 [ 42.901598] ? do_exit+0xcc6/0x1220 [ 42.902789] ? __fget+0xa8/0xf0 [ 42.903190] vfs_write+0xf7/0x280 [ 42.903600] SyS_write+0xa1/0x120 [ 42.904206] ? SyS_read+0x120/0x120 [ 42.905710] ? compat_start_thread+0x60/0x60 [ 42.906423] ? SyS_read+0x120/0x120 [ 42.908716] do_syscall_64+0xeb/0x250 [ 42.910760] entry_SYSCALL_64_after_hwframe+0x21/0x86 [ 42.912735] RIP: 0033:0x7f138b0afe99 [ 42.914734] RSP: 002b:00007f138b799e98 EFLAGS: 00000287 ORIG_RAX: 0000000000000001 [ 42.917134] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f138b0afe99 [ 42.919487] RDX: 000000000000002e RSI: 0000000020000c40 RDI: 0000000000000004 [ 42.922393] RBP: 00007f138b799ec0 R08: 00007f138b79a700 R09: 0000000000000000 [ 42.925266] R10: 00007f138b79a700 R11: 0000000000000287 R12: 00007f138b799fc0 [ 42.927570] R13: 0000000000000000 R14: 00007ffdbae757c0 R15: 00007f138b79a9c0 [ 42.930047] [ 42.932681] Disabling lock debugging due to kernel taint [ 42.934795] BUG: unable to handle kernel NULL pointer dereference at 00000000000000a0 [ 42.936939] IP: memcpy_erms+0x6/0x10 [ 42.938864] PGD 80000001bea92067 P4D 80000001bea92067 PUD 1bea96067 PMD 0 [ 42.941576] Oops: 0002 [#1] SMP KASAN PTI [ 42.943952] CPU: 1 PID: 1044 Comm: resaddr Tainted: G B 4.16.0-rc1-00057-gaa56a5293d7e #34 [ 42.946964] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.0-0-g63451fca13-prebuilt.qemu-project.org 04/01/2014 [ 42.952336] RIP: 0010:memcpy_erms+0x6/0x10 [ 42.954707] RSP: 0018:ffff8801c8b479c8 EFLAGS: 00010286 [ 42.957227] RAX: 00000000000000a0 RBX: ffff8801c8b47ba0 RCX: 000000000000001c [ 42.960543] RDX: 000000000000001c RSI: ffff8801c8b47bbc RDI: 00000000000000a0 [ 42.963867] RBP: ffff8801c8b47b60 R08: 0000000000000000 R09: ffffed0039168ed1 [ 42.967303] R10: 0000000000000001 R11: ffffed0039168ed0 R12: ffff8801c8b47bbc [ 42.970685] R13: 00000000000000a0 R14: 1ffff10039168f4a R15: 0000000000000000 [ 42.973631] FS: 00007f138b79a700(0000) GS:ffff8801e5d00000(0000) knlGS:0000000000000000 [ 42.976831] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 42.979239] CR2: 00000000000000a0 CR3: 00000001be908002 CR4: 00000000003606a0 [ 42.982060] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 42.984877] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 42.988033] Call Trace: [ 42.990487] rdma_resolve_addr+0xc8/0xfb0 [ 42.993202] ? deref_stack_reg+0x88/0xd0 [ 42.996055] ? vsnprintf+0x31a/0x770 [ 42.998707] ? rdma_bind_addr+0xc40/0xc40 [ 43.000985] ? num_to_str+0x130/0x130 [ 43.003410] ? deref_stack_reg+0x88/0xd0 [ 43.006302] ? __read_once_size_nocheck.constprop.6+0x10/0x10 [ 43.008780] ? unwind_get_return_address_ptr+0x50/0x50 [ 43.011178] ? replace_slot+0x147/0x170 [ 43.013517] ? delete_node+0x12c/0x340 [ 43.016019] ? __radix_tree_lookup+0xa9/0x160 [ 43.018755] ? ucma_resolve_ip+0xb7/0x110 [ 43.021270] ucma_resolve_ip+0xb7/0x110 [ 43.023968] ? ucma_resolve_addr+0x190/0x190 [ 43.026312] ? _copy_from_user+0x5e/0x90 [ 43.029384] ucma_write+0x174/0x1f0 [ 43.031861] ? ucma_resolve_route+0xf0/0xf0 [ 43.034782] ? dequeue_task_fair+0x67e/0xd90 [ 43.037483] ? put_prev_entity+0x7d/0x170 [ 43.040215] ? ring_buffer_record_is_on+0xd/0x20 [ 43.042990] ? tracing_record_taskinfo_skip+0x20/0x50 [ 43.045595] __vfs_write+0xc4/0x350 [ 43.048624] ? kernel_read+0xa0/0xa0 [ 43.051604] ? firmware_map_remove+0xdf/0xdf [ 43.055379] ? do_task_dead+0x5d/0x60 [ 43.058000] ? do_exit+0xcc6/0x1220 [ 43.060783] ? __fget+0xa8/0xf0 [ 43.063133] vfs_write+0xf7/0x280 [ 43.065677] SyS_write+0xa1/0x120 [ 43.068647] ? SyS_read+0x120/0x120 [ 43.071179] ? compat_start_thread+0x60/0x60 [ 43.074025] ? SyS_read+0x120/0x120 [ 43.076705] do_syscall_64+0xeb/0x250 [ 43.079006] entry_SYSCALL_64_after_hwframe+0x21/0x86 [ 43.081606] RIP: 0033:0x7f138b0afe99 [ 43.083679] RSP: 002b:00007f138b799e98 EFLAGS: 00000287 ORIG_RAX: 0000000000000001 [ 43.086802] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f138b0afe99 [ 43.089989] RDX: 000000000000002e RSI: 0000000020000c40 RDI: 0000000000000004 [ 43.092866] RBP: 00007f138b799ec0 R08: 00007f138b79a700 R09: 0000000000000000 [ 43.096233] R10: 00007f138b79a700 R11: 0000000000000287 R12: 00007f138b799fc0 [ 43.098913] R13: 0000000000000000 R14: 00007ffdbae757c0 R15: 00007f138b79a9c0 [ 43.101809] Code: 90 90 90 90 90 eb 1e 0f 1f 00 48 89 f8 48 89 d1 48 c1 e9 03 83 e2 07 f3 48 a5 89 d1 f3 a4 c3 66 0f 1f 44 00 00 48 89 f8 48 89 d1 <f3> a4 c3 0f 1f 80 00 00 00 00 48 89 f8 48 83 fa 20 72 7e 40 38 [ 43.107950] RIP: memcpy_erms+0x6/0x10 RSP: ffff8801c8b479c8 Reported-by: <syzbot+1d8c43206853b369d00c@syzkaller.appspotmail.com> Fixes: 75216638572f ("RDMA/cma: Export rdma cm interface to userspace") Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-16Merge branch 'linux-4.16' of git://github.com/skeggsb/linux into drm-fixesDave Airlie
nouveau regression fixes. * 'linux-4.16' of git://github.com/skeggsb/linux: drm/nouveau/bl: fix backlight regression drm/nouveau/bl: Fix oops on driver unbind drm/nouveau/mmu: ALIGN_DOWN correct variable
2018-03-15Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs fixes from Al Viro: - backport-friendly part of lock_parent() race fix - a fix for an assumption in the heurisic used by path_connected() that is not true on NFS - livelock fixes for d_alloc_parallel() * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fs: Teach path_connected to handle nfs filesystems with multiple roots. fs: dcache: Use READ_ONCE when accessing i_dir_seq fs: dcache: Avoid livelock between d_alloc_parallel and __d_add lock_parent() needs to recheck if dentry got __dentry_kill'ed under it
2018-03-16drm/nouveau/bl: fix backlight regressionKarol Herbst
Fixes: 3c66c87dc9 ("drm/nouveau/disp: remove hw-specific customisation of output paths") Suggested-by: Ben Skeggs <skeggsb@redhat.com> Signed-off-by: Karol Herbst <kherbst@redhat.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2018-03-16drm/nouveau/bl: Fix oops on driver unbindLukas Wunner
Unbinding nouveau on a dual GPU MacBook Pro oopses because we iterate over the bl_connectors list in nouveau_backlight_exit() but skipped initializing it in nouveau_backlight_init(). Stacktrace for posterity: BUG: unable to handle kernel NULL pointer dereference at 0000000000000010 IP: nouveau_backlight_exit+0x2b/0x70 [nouveau] nouveau_display_destroy+0x29/0x80 [nouveau] nouveau_drm_unload+0x65/0xe0 [nouveau] drm_dev_unregister+0x3c/0xe0 [drm] drm_put_dev+0x2e/0x60 [drm] nouveau_drm_device_remove+0x47/0x70 [nouveau] pci_device_remove+0x36/0xb0 device_release_driver_internal+0x157/0x220 driver_detach+0x39/0x70 bus_remove_driver+0x51/0xd0 pci_unregister_driver+0x2a/0xa0 nouveau_drm_exit+0x15/0xfb0 [nouveau] SyS_delete_module+0x18c/0x290 system_call_fast_compare_end+0xc/0x6f Fixes: b53ac1ee12a3 ("drm/nouveau/bl: Do not register interface if Apple GMUX detected") Cc: stable@vger.kernel.org # v4.10+ Cc: Pierre Moreau <pierre.morrow@free.fr> Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2018-03-16drm/nouveau/mmu: ALIGN_DOWN correct variableMāris Nartišs
Commit 7110c89bb8852ff8b0f88ce05b332b3fe22bd11e ("mmu: swap out round for ALIGN") replaced two calls to round/rounddown with ALIGN/ALIGN_DOWN, but erroneously applied ALIGN_DOWN to a different variable (addr) and left intended variable (tail) not rounded/ALIGNed. As a result screen corruption, X lockups are observable. An example of kernel log of affected system with NV98 card where it was bisected: nouveau 0000:01:00.0: gr: TRAP_M2MF 00000002 [IN] nouveau 0000:01:00.0: gr: TRAP_M2MF 00320951 400007c0 00000000 04000000 nouveau 0000:01:00.0: gr: 00200000 [] ch 1 [000fbbe000 DRM] subc 4 class 5039 mthd 0100 data 00000000 nouveau 0000:01:00.0: fb: trapped read at 0040000000 on channel 1 [0fbbe000 DRM] engine 00 [PGRAPH] client 03 [DISPATCH] subclient 04 [M2M_IN] reason 00000006 [NULL_DMAOBJ] Fixes bug 105173 ("[MCP79][Regression] Unhandled NULL pointer dereference in nvkm_object_unmap since kernel 4.15") https://bugs.freedesktop.org/show_bug.cgi?id=105173 Fixes: 7110c89bb885 ("mmu: swap out round for ALIGN ") Tested-by: Pierre Moreau <pierre.morrow@free.fr> Reviewed-by: Pierre Moreau <pierre.morrow@free.fr> Signed-off-by: Maris Nartiss <maris.nartiss@gmail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Cc: stable@vger.kernel.org # v4.15+
2018-03-15fs: Teach path_connected to handle nfs filesystems with multiple roots.Eric W. Biederman
On nfsv2 and nfsv3 the nfs server can export subsets of the same filesystem and report the same filesystem identifier, so that the nfs client can know they are the same filesystem. The subsets can be from disjoint directory trees. The nfsv2 and nfsv3 filesystems provides no way to find the common root of all directory trees exported form the server with the same filesystem identifier. The practical result is that in struct super s_root for nfs s_root is not necessarily the root of the filesystem. The nfs mount code sets s_root to the root of the first subset of the nfs filesystem that the kernel mounts. This effects the dcache invalidation code in generic_shutdown_super currently called shrunk_dcache_for_umount and that code for years has gone through an additional list of dentries that might be dentry trees that need to be freed to accomodate nfs. When I wrote path_connected I did not realize nfs was so special, and it's hueristic for avoiding calling is_subdir can fail. The practical case where this fails is when there is a move of a directory from the subtree exposed by one nfs mount to the subtree exposed by another nfs mount. This move can happen either locally or remotely. With the remote case requiring that the move directory be cached before the move and that after the move someone walks the path to where the move directory now exists and in so doing causes the already cached directory to be moved in the dcache through the magic of d_splice_alias. If someone whose working directory is in the move directory or a subdirectory and now starts calling .. from the initial mount of nfs (where s_root == mnt_root), then path_connected as a heuristic will not bother with the is_subdir check. As s_root really is not the root of the nfs filesystem this heuristic is wrong, and the path may actually not be connected and path_connected can fail. The is_subdir function might be cheap enough that we can call it unconditionally. Verifying that will take some benchmarking and the result may not be the same on all kernels this fix needs to be backported to. So I am avoiding that for now. Filesystems with snapshots such as nilfs and btrfs do something similar. But as the directory tree of the snapshots are disjoint from one another and from the main directory tree rename won't move things between them and this problem will not occur. Cc: stable@vger.kernel.org Reported-by: Al Viro <viro@ZenIV.linux.org.uk> Fixes: 397d425dc26d ("vfs: Test for and handle paths that are unreachable from their mnt_root") Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-03-15Merge tag 'gvt-fixes-2018-03-15' of https://github.com/intel/gvt-linux into ↵Rodrigo Vivi
drm-intel-fixes gvt-fixes-2018-03-15 - Two warnings fix for runtime pm and usr copy (Xiong, Zhenyu) - OA context fix for vGPU profiling (Min) - privilege batch buffer reloc fix (Fred) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180315100023.5n5a74afky6qinoh@zhen-hp.sh.intel.com
2018-03-15drm/amdkfd: Add module option for testing large-BAR functionalityFelix Kuehling
Simulate large-BAR system by exporting only visible memory. This limits the amount of available VRAM to the size of the BAR, but enables CPU access to VRAM. Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Acked-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2018-03-15drm/amdkfd: Kmap event page for dGPUsFelix Kuehling
The events page must be accessible in user mode by the GPU and CPU as well as in kernel mode by the CPU. On dGPUs user mode virtual addresses are managed by the Thunk's GPU memory allocation code. Therefore we can't allocate the memory in kernel mode like we do on APUs. But KFD still needs to map the memory for kernel access. To facilitate this, the Thunk provides the buffer handle of the events page to KFD when creating the first event. Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2018-03-15drm/amdkfd: Add ioctls for GPUVM memory managementFelix Kuehling
v2: * Fix error handling after kfd_bind_process_to_device in kfd_ioctl_map_memory_to_gpu v3: * Add ioctl to acquire VM from a DRM FD v4: * Return number of successful map/unmap operations in failure cases * Facilitate partial retry after failed map/unmap * Added comments with parameter descriptions to new APIs * Defined AMDKFD_IOC_FREE_MEMORY_OF_GPU write-only Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2018-03-15drm/amdkfd: Add TC flush on VMID deallocation for HawaiiFelix Kuehling
On GFX7 the CP does not perform a TC flush when queues are unmapped. To avoid TC eviction from accessing an invalid VMID, flush it explicitly before releasing a VMID. v2: Fix unnecessary list_for_each_entry_safe v3: Moved allocation to kfd_process_device_init_vm Signed-off-by: Amber Lin <Amber.Lin@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2018-03-15drm/amdkfd: Allocate CWSR trap handler memory for dGPUsFelix Kuehling
Add helpers for allocating GPUVM memory in kernel mode and use them to allocate memory for the CWSR trap handler. v2: Use dev instead of pdd->dev in kfd_process_free_gpuvm v3: * Cleaned up and simplified kfd_process_alloc_gpuvm * Moved allocation for dGPU to kfd_process_device_init_vm Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2018-03-15drm/amdkfd: Add per-process IDR for buffer handlesFelix Kuehling
Also used for cleaning up on process termination. v2: Refactored cleanup on process termination Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
generated by cgit (git 2.34.1) at 2025-09-13 04:33:11 +0000