| Age | Commit message (Collapse) | Author |
|---|
|
This simplifies the code while improving log.
Signed-off-by: Enrico Zanda <e.zanda1@gmail.com>
Link: https://lore.kernel.org/r/20250513210246.528370-2-e.zanda1@gmail.com
Signed-off-by: Andi Shyti <andi@smida.it>
|
|
Converting the WARN_ON() to a dev_dbg() message in
i2c_dw_clk_rate().
That removes the need to supply a dummy implementation for
the callback (or alternatively a dummy clk device) when the
fallback path is preferred where the existing values already
in the clock registers are used - when a firmware has
programmed the clock registers.
The fallback path was introduced in commit 4fec76e0985c
("i2c: designware: Fix wrong setting for {ss,fs,hs}_{h,l}cnt
registers").
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Link: https://lore.kernel.org/r/20250513124015.2568924-1-heikki.krogerus@linux.intel.com
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
Replaced pm_runtime_put() with pm_runtime_put_sync_suspend() to ensure
the runtime suspend is invoked immediately when unregistering a slave.
This prevents a race condition where suspend was skipped when
unregistering and registering slave in quick succession.
For example, consider the rapid sequence of
`delete_device -> new_device -> delete_device -> new_device`.
In this sequence, it is observed that the dw_i2c_plat_runtime_suspend()
might not be invoked after `delete_device` operation.
This is because after `delete_device` operation, when the
pm_runtime_put() is about to trigger suspend, the following `new_device`
operation might race and cancel the suspend.
If that happens, during the `new_device` operation,
dw_i2c_plat_runtime_resume() is skipped (since there was no suspend), which
means `i_dev->init()`, i.e. i2c_dw_init_slave(), is skipped.
Since i2c_dw_init_slave() is skipped, i2c_dw_configure_fifo_slave() is
skipped too, which leaves `DW_IC_INTR_MASK` unconfigured. If we inspect
the interrupt mask register using devmem, it will show as zero.
Example shell script to reproduce the issue:
```
#!/bin/sh
SLAVE_LADDR=0x1010
SLAVE_BUS=13
NEW_DEVICE=/sys/bus/i2c/devices/i2c-$SLAVE_BUS/new_device
DELETE_DEVICE=/sys/bus/i2c/devices/i2c-$SLAVE_BUS/delete_device
# Create initial device
echo slave-24c02 $SLAVE_LADDR > $NEW_DEVICE
sleep 2
# Rapid sequence of
# delete_device -> new_device -> delete_device -> new_device
echo $SLAVE_LADDR > $DELETE_DEVICE
echo slave-24c02 $SLAVE_LADDR > $NEW_DEVICE
echo $SLAVE_LADDR > $DELETE_DEVICE
echo slave-24c02 $SLAVE_LADDR > $NEW_DEVICE
# Using devmem to inspect IC_INTR_MASK will show as zero
```
Signed-off-by: Tan En De <ende.tan@starfivetech.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Link: https://lore.kernel.org/r/20250412023303.378600-1-ende.tan@starfivetech.com
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
Update the I2C bus timing configuration on BlueField to match the
configuration recommended and verified by the HW team.
I2C block read failures were found on BlueField 3 during communication
with a device that requires the use of repeated start conditions.
Testing showed that these failures were caused by the I2C transaction
getting aborted early due to a short bus "timeout" configuration value.
This value determines how long the clock can be held low before the I2C
transaction is aborted.
Upon further inspection, it was also found that other I2C bus timing
configuration values used by the kernel driver do not match the
configuration that is recommended by the HW team and used in the
BlueField BSP I2C drivers.
Signed-off-by: Chris Babroski <cbabroski@nvidia.com>
Reviewed-by: Asmaa Mnebhi <asmaa@nvidia.com>
Reviewed-by: Khalil Blaiech <kblaiech@nvidia.com>
Link: https://lore.kernel.org/r/20250506193059.321345-2-cbabroski@nvidia.com
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
Add support for SMBus repeated start conditions to the Mellanox I2C
driver. This support is specifically enabled for the
I2C_FUNC_SMBUS_WRITE_I2C_BLOCK implementation which is required for
communication with a specific I2C device on BlueField 3.
Signed-off-by: Chris Babroski <cbabroski@nvidia.com>
Reviewed-by: Asmaa Mnebhi <asmaa@nvidia.com>
Reviewed-by: Khalil Blaiech <kblaiech@nvidia.com>
Link: https://lore.kernel.org/r/20250506193059.321345-1-cbabroski@nvidia.com
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
This simplifies the code while improving log.
Signed-off-by: Enrico Zanda <e.zanda1@gmail.com>
Link: https://lore.kernel.org/r/20250511203920.325704-2-e.zanda1@gmail.com
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
Rewrite the textual description for the WonderMedia I2C controller
as YAML schema, and switch the filename to follow the compatible
string.
The controller only supports two bus speeds (100kHz and 400kHz)
so restrict clock-frequency values accordingly.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Alexey Charkov <alchark@gmail.com>
Link: https://lore.kernel.org/r/20250506-vt8500-i2c-binding-v3-1-401c3e090a88@gmail.com
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
Add hardware support for the SMBUS commands smbus_quick, smbus_byte,
smbus_byte_data, smbus_word_data and smbus_block_data, replacing the
fallback to software emulation
Signed-off-by: prashanth kumar burujukindi <prashanthkumar.burujukindi@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250430-preview-dormitory-85191523283d@spud
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
Extend the Kconfig dependency to include COMPILE_TEST so the
Mellanox BlueField I2C driver can be built on non-ARM64 platforms
for compile testing purposes.
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Cc: Khalil Blaiech <kblaiech@nvidia.com>
Cc: Asmaa Mnebhi <asmaa@nvidia.com>
Link: https://lore.kernel.org/r/20250505215854.2896383-1-andi.shyti@kernel.org
|
|
The AMD Image Signal Processor I2C functionality is only present on AMD
platforms with ISP support, and its platform device is instantiated by
the AMD ISP driver. Hence add a dependency on DRM_AMD_ISP, to prevent
asking the user about this driver when configuring a kernel that does
not support the AMD ISP.
Fixes: d6263c468a76 ("i2c: amd-isp: Add ISP i2c-designware driver")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Pratap Nirujogi <pratap.nirujogi@amd.com>
Link: https://lore.kernel.org/r/3888f892b8c4d8c8acd17e56581e726ace7f7092.1746536495.git.geert+renesas@glider.be
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
sm501_find_clock() was added in 2007 as part of
commit b6d6454fdb66 ("[PATCH] mfd: SM501 core driver")
but hasn't been used.
Remove it.
Signed-off-by: "Dr. David Alan Gilbert" <linux@treblig.org>
Link: https://lore.kernel.org/r/20250509173521.49596-1-linux@treblig.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
'struct regmap_irq_chip' is not modified in this driver.
Constifying this structure moves some data to a read-only section, so
increase overall security, especially when the structure holds some
function pointers.
While at it, also constify some other structures.
On a x86_64, with allmodconfig, as an example:
Before:
======
text data bss dec hex filename
5032 3304 64 8400 20d0 drivers/mfd/88pm886.o
After:
=====
text data bss dec hex filename
5800 2536 64 8400 20d0 drivers/mfd/88pm886.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/1681629840761e30494cb8920668710df60a81b8.1746996137.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
The register space described by DT node of compatible
mediatek,mt8365-infracfg-nao exposes a variety of unrelated registers,
including registers for controlling bus protection on the MT8365 SoC,
which is used by the power domain controller through a syscon.
Add this compatible to the syscon binding.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250502-mt8365-infracfg-nao-compatible-v1-1-e40394573f98@collabora.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Device can be unbound, so driver must also release memory for the wakeup
source.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Link: https://lore.kernel.org/r/20250406-mfd-device-wakekup-leak-v1-8-318e14bdba0a@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Device can be unbound, so driver must also release memory for the wakeup
source.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250406-mfd-device-wakekup-leak-v1-7-318e14bdba0a@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Device can be unbound, so driver must also release memory for the wakeup
source.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250406-mfd-device-wakekup-leak-v1-6-318e14bdba0a@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Device can be unbound, so driver must also release memory for the wakeup
source.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250406-mfd-device-wakekup-leak-v1-5-318e14bdba0a@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Device can be unbound, so driver must also release memory for the wakeup
source.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250406-mfd-device-wakekup-leak-v1-4-318e14bdba0a@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Device can be unbound, so driver must also release memory for the wakeup
source.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250406-mfd-device-wakekup-leak-v1-3-318e14bdba0a@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Device can be unbound, so driver must also release memory for the wakeup
source.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250406-mfd-device-wakekup-leak-v1-2-318e14bdba0a@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Device can be unbound, so driver must also release memory for the wakeup
source.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Karel Balej <balejk@matfyz.cz>
Link: https://lore.kernel.org/r/20250406-mfd-device-wakekup-leak-v1-1-318e14bdba0a@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
DTS example in the bindings should be indented with 2- or 4-spaces and
aligned with opening '- |', so correct any differences like 3-spaces or
mixtures 2- and 4-spaces in one binding. While re-indenting, drop
unused labels.
No functional changes here, but saves some comments during reviews of
new patches built on existing code.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250501145125.59952-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Binding example should not contain other nodes, e.g. consumers of
resource providers, because this is completely redundant and adds
unnecessary bloat.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250501145125.59952-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Add compat for Smart Peripheral System (SPS) Interrupt Controller (SIC)
present on Qualcomm APQ8064 SoC.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Acked-by: "Rob Herring (Arm)" <robh@kernel.org>
Link: https://lore.kernel.org/r/20250425-fix-nexus-4-v3-3-da4e39e86d41@oss.qualcomm.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Add compat string for Qualcomm MultiMedia SubSystem System FPB.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Acked-by: "Rob Herring (Arm)" <robh@kernel.org>
Link: https://lore.kernel.org/r/20250425-fix-nexus-4-v3-2-da4e39e86d41@oss.qualcomm.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
The name used in the macro does not exist.
drivers/mfd/stmpe-spi.c:132:26: error: use of undeclared identifier 'stmpe_id'
132 | MODULE_DEVICE_TABLE(spi, stmpe_id);
Fixes: e789995d5c61 ("mfd: Add support for STMPE SPI interface")
Signed-off-by: Alexey Gladkov <legion@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/79d5a847303e45a46098f2d827d3d8a249a32be3.1745591072.git.legion@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Add compatible for Mediatek mt7988 topmisc syscon.
This hardware block contains 2 functional blocks
- a powercontroller which is not needed (switched by atf)
- a multiplexer for high-speed Combo-Phy
This compatible is only for the multiplexer part.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250422132438.15735-6-linux@fw-web.de
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
If devm_of_platform_populate() fails, some clean-up needs to be done, as
already done in the remove function.
Add a new devm_add_action_or_reset() to fix the leak in the probe and
remove the need of a remove function.
Fixes: c695abab2429 ("mfd: Add Samsung Exynos Low Power Audio Subsystem driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/69471e839efc0249a504492a8de3497fcdb6a009.1745247209.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
exynos_lpass_remove()
exynos_lpass_disable() is called twice in the remove function. Remove
one of these calls.
Fixes: 90f447170c6f ("mfd: exynos-lpass: Add runtime PM support")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/74d69e8de10308c9855db6d54155a3de4b11abfd.1745247209.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
If an error occurs after a successful regmap_init_mmio(), regmap_exit()
should be called as already done in the .remove() function.
Switch to devm_regmap_init_mmio() to avoid the leak and simplify the
.remove() function.
Fixes: c414df12bdf7 ("mfd: exynos-lpass: Add missing remove() function")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/38414eecb1096840946756ae86887aea2a489c1b.1745247209.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Add a compatible string for the scpsys block found in the MediaTek
Dimensity 1200 (MT6893) SoC.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: "Rob Herring (Arm)" <robh@kernel.org>
Link: https://lore.kernel.org/r/20250416120225.147826-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
I'm working on a Samsung device which includes this MFD and would like
to be Cc'ed to further contributions and help on reviewing them. Add me
as reviewer.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250409-s2mpg10-v4-32-d66d5f39b6bf@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Add myself as module author, so people know whom to complain to about
after the recent updates.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250409-s2mpg10-v4-23-d66d5f39b6bf@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Use REGMAP_IRQ_REG macro helpers instead of open coding. This makes the
code a bit shorter and more obvious.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250409-s2mpg10-v4-22-d66d5f39b6bf@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Use MFD_CELL macro helpers instead of open coding. This makes the code
a bit shorter and more obvious.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250409-s2mpg10-v4-21-d66d5f39b6bf@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Using sizeof(*var) is generally preferred over using the size of its
open-coded type when allocating memory.
This helps avoiding bugs when the variable type changes but the memory
allocation isn't updated, and it simplifies renaming of the struct if
ever necessary.
No functional change.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250409-s2mpg10-v4-20-d66d5f39b6bf@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Follow general style and use if (!arg) instead of comparing against
NULL.
While at it, drop a useless init in sec-irq.c.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250409-s2mpg10-v4-19-d66d5f39b6bf@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Now that sec-i2c doesn't match device type by pointer casting anymore,
we can switch the device type from unsigned long to int easily.
This saves a few bytes in struct sec_pmic_dev due to member alignment.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250409-s2mpg10-v4-18-d66d5f39b6bf@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Instead of a large open-coded switch statement, just add both regmap
config and device type to the OF match data. This allows us to have all
related information in one place, and avoids a long switch() statement.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250409-s2mpg10-v4-17-d66d5f39b6bf@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
sec_irq_init() can fail, we shouldn't continue and ignore the error in
that case, but actually error out.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250409-s2mpg10-v4-16-d66d5f39b6bf@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
The commit bf231e5febcf ("mfd: sec-core: Add support for the Samsung
s2dos05") adding s2dos05 support didn't add anything related to IRQ
support, so I assume this works without IRQs.
Rather than printing a warning message in sec_irq_init() due to the
missing IRQ number, or returning an error due to a missing irq chip
regmap, just return early explicitly.
This will become particularly important once errors from sec_irq_init()
aren't ignored anymore in an upcoming patch and helps the reader of
this code while reasoning about what the intention might be here.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250409-s2mpg10-v4-15-d66d5f39b6bf@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
When support for PMICs without compatibles was removed in
commit f736d2c0caa8 ("mfd: sec: Remove PMICs without compatibles"),
sec_regmap_config effectively became an orphan, because S5M8763X was
the only user left of it before removal, using the default: case of the
switch statement.
When s2dos05 and s2mpu05 support was added in commit bf231e5febcf
("mfd: sec-core: Add support for the Samsung s2dos05") and commit
ed33479b7beb ("mfd: sec: Add support for S2MPU05 PMIC"), they ended up
using that orphaned regmap_config in a non-obvious way due to the
default: case of the device type switch matching statement taking
effect again.
To make things more obvious, and to help the reader of this code while
reasoning about what the intention might be here, and to ensure future
additions to support new devices in this driver don't forget to add a
regmap config, add an explicit regmap config for these two devices, and
completely remove the generic regmap config as it becomes an orphan
again that shouldn't be used by any device.
Note that this commit doesn't fix the issue that s2dos05_regmap_config
ands2mpu05_regmap_config really are incomplete, but I have no
documentation on them.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250409-s2mpg10-v4-14-d66d5f39b6bf@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
dev_err_probe() exists to simplify code and harmonise error messages,
there's no reason not to use it here.
While at it, harmonise some error messages.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250409-s2mpg10-v4-13-d66d5f39b6bf@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Sort struct of_device_id entries and the device type switch in _probe()
alphabetically, which makes it easier to find the right place where to
insert new entries in the future.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250409-s2mpg10-v4-12-d66d5f39b6bf@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Rectify a couple of alignment problems reported by Checkpatch.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250409-s2mpg10-v4-11-d66d5f39b6bf@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
There is no reason to have these two kernel modules separate. Having
them merged into one kernel module also slightly reduces memory
consumption and module load times a little.
mapped size (lsmod):
before: after:
sec_core 20480 sec_core 24576
sec_irq 16384
----------------
total 36864
Section sizes (size -A):
before: after:
sec_core 6780 sec_core 13239
sec_irq 8046
----------------
Total 14826
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250409-s2mpg10-v4-10-d66d5f39b6bf@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Add support for Samsung's S2MPG10 PMIC, which is a Power Management IC
for mobile applications with buck converters, various LDOs, power
meters, RTC, clock outputs, and additional GPIOs interfaces.
Contrary to existing Samsung S2M series PMICs supported, communication
is not via I2C, but via the Samsung ACPM firmware.
This commit adds the core driver.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250409-s2mpg10-v4-9-d66d5f39b6bf@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
As a preparation for adding support for Samsung's S2MPG10, which is
connected via SPEEDY / ACPM rather than I2C, split out (move) all
I2C-specific driver code into its own kernel module, sec-i2c, and
make the existing sec-core module be just the transport-agnostic core
driver kernel module.
At the same time, update all defconfigs that reference the old kconfig
symbol name.
While at it, also update file header comments and module description(s)
to drop references to 'mfd', and update comments to be C-style, not
C++.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250409-s2mpg10-v4-8-d66d5f39b6bf@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
sec_irq_init() is an internal API for the core driver, and doesn't
belong into the public header.
Due to an upcoming split of the driver into a core and i2c driver,
we'll also be adding more internal APIs, which again shouldn't be in
the public header.
Move it into a new internal include.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250409-s2mpg10-v4-7-d66d5f39b6bf@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
This driver misses to include some of the respective headers of some of
the APIs used. It also includes headers that aren't needed (e.g. due to
previous driver rework where includes weren't updated).
It is good practice to directly include all headers used, which avoids
implicit dependencies and spurious build breakage if someone rearranged
headers, as this could cause the implicit includes to be dropped.
Include the relevant headers explicitly and drop superfluous ones.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250409-s2mpg10-v4-6-d66d5f39b6bf@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
