summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-03-25ARM: davinci: fix build failure with allnoconfigSekhar Nori
allnoconfig build with just ARCH_DAVINCI enabled fails because drivers/clk/davinci/* depends on REGMAP being enabled. Fix it by selecting REGMAP_MMIO when building in DaVinci support. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Reviewed-by: David Lechner <david@lechnology.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-03-25ALSA: pcm: Don't suspend stream in unrecoverable PCM stateTakashi Iwai
Currently PCM core sets each opened stream forcibly to SUSPENDED state via snd_pcm_suspend_all() call, and the user-space is responsible for re-triggering the resume manually either via snd_pcm_resume() or prepare call. The scheme works fine usually, but there are corner cases where the stream can't be resumed by that call: the streams still in OPEN state before finishing hw_params. When they are suspended, user-space cannot perform resume or prepare because they haven't been set up yet. The only possible recovery is to re-open the device, which isn't nice at all. Similarly, when a stream is in DISCONNECTED state, it makes no sense to change it to SUSPENDED state. Ditto for in SETUP state; which you can re-prepare directly. So, this patch addresses these issues by filtering the PCM streams to be suspended by checking the PCM state. When a stream is in either OPEN, SETUP or DISCONNECTED as well as already SUSPENDED, the suspend action is skipped. To be noted, this problem was originally reported for the PCM runtime PM on HD-audio. And, the runtime PM problem itself was already addressed (although not intended) by the code refactoring commits 3d21ef0b49f8 ("ALSA: pcm: Suspend streams globally via device type PM ops") and 17bc4815de58 ("ALSA: pci: Remove superfluous snd_pcm_suspend*() calls"). These commits eliminated the snd_pcm_suspend*() calls from the runtime PM suspend callback code path, hence the racy OPEN state won't appear while runtime PM. (FWIW, the race window is between snd_pcm_open_substream() and the first power up in azx_pcm_open().) Although the runtime PM issue was already "fixed", the same problem is still present for the system PM, hence this patch is still needed. And for stable trees, this patch alone should suffice for fixing the runtime PM problem, too. Reported-and-tested-by: Jon Hunter <jonathanh@nvidia.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-03-25reset: meson-audio-arb: Fix missing .owner setting of reset_controller_devAxel Lin
Set .owner to prevent module unloading while being used. Signed-off-by: Axel Lin <axel.lin@ingics.com> Fixes: d903779b58be ("reset: meson: add meson audio arb driver") Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-03-25dt-bindings: reset: meson-g12a: Add missing USB2 PHY resetsNeil Armstrong
The G12A Documentation lacked these 2 reset lines, but they are present and used for each USB 2 PHYs. Add them to the dt-bindings for the upcoming USB support. Fixes: dbfc54534dfc ("dt-bindings: reset: meson: add g12a bindings") Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-03-25xfs: prohibit fstrim in norecovery modeDarrick J. Wong
The xfs fstrim implementation uses the free space btrees to find free space that can be discarded. If we haven't recovered the log, the bnobt will be stale and we absolutely *cannot* use stale metadata to zap the underlying storage. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Eric Sandeen <sandeen@redhat.com>
2019-03-25iommu: Don't print warning when IOMMU driver only supports unmanaged domainsJoerg Roedel
Print the warning about the fall-back to IOMMU_DOMAIN_DMA in iommu_group_get_for_dev() only when such a domain was actually allocated. Otherwise the user will get misleading warnings in the kernel log when the iommu driver used doesn't support IOMMU_DOMAIN_DMA and IOMMU_DOMAIN_IDENTITY. Fixes: fccb4e3b8ab09 ('iommu: Allow default domain type to be set on the kernel command line') Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-03-25drm/i915/bios: iterate over child devices to initialize ddi_port_infoJani Nikula
Iterate over child devices instead of ports in parse_ddi_ports() to initialize ddi_port_info. We'll eventually need to decide some stuff based on the child device order, which may be different from the port order. As a bonus, this allows better abstractions for e.g. dvo port mapping. There's a subtle change in the DDC pin and AUX channel sanitization as we change the order. Otherwise, this should not change behaviour. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190322121008.4456-1-jani.nikula@intel.com
2019-03-25locks: wake any locks blocked on request before deadlock checkJeff Layton
Andreas reported that he was seeing the tdbtorture test fail in some cases with -EDEADLCK when it wasn't before. Some debugging showed that deadlock detection was sometimes discovering the caller's lock request itself in a dependency chain. While we remove the request from the blocked_lock_hash prior to reattempting to acquire it, any locks that are blocked on that request will still be present in the hash and will still have their fl_blocker pointer set to the current request. This causes posix_locks_deadlock to find a deadlock dependency chain when it shouldn't, as a lock request cannot block itself. We are going to end up waking all of those blocked locks anyway when we go to reinsert the request back into the blocked_lock_hash, so just do it prior to checking for deadlocks. This ensures that any lock blocked on the current request will no longer be part of any blocked request chain. URL: https://bugzilla.kernel.org/show_bug.cgi?id=202975 Fixes: 5946c4319ebb ("fs/locks: allow a lock request to block other requests.") Cc: stable@vger.kernel.org Reported-by: Andreas Schneider <asn@redhat.com> Signed-off-by: Neil Brown <neilb@suse.com> Signed-off-by: Jeff Layton <jlayton@kernel.org>
2019-03-25powerpc/64: Fix memcmp reading past the end of src/destMichael Ellerman
Chandan reported that fstests' generic/026 test hit a crash: BUG: Unable to handle kernel data access at 0xc00000062ac40000 Faulting instruction address: 0xc000000000092240 Oops: Kernel access of bad area, sig: 11 [#1] LE SMP NR_CPUS=2048 DEBUG_PAGEALLOC NUMA pSeries CPU: 0 PID: 27828 Comm: chacl Not tainted 5.0.0-rc2-next-20190115-00001-g6de6dba64dda #1 NIP: c000000000092240 LR: c00000000066a55c CTR: 0000000000000000 REGS: c00000062c0c3430 TRAP: 0300 Not tainted (5.0.0-rc2-next-20190115-00001-g6de6dba64dda) MSR: 8000000002009033 <SF,VEC,EE,ME,IR,DR,RI,LE> CR: 44000842 XER: 20000000 CFAR: 00007fff7f3108ac DAR: c00000062ac40000 DSISR: 40000000 IRQMASK: 0 GPR00: 0000000000000000 c00000062c0c36c0 c0000000017f4c00 c00000000121a660 GPR04: c00000062ac3fff9 0000000000000004 0000000000000020 00000000275b19c4 GPR08: 000000000000000c 46494c4500000000 5347495f41434c5f c0000000026073a0 GPR12: 0000000000000000 c0000000027a0000 0000000000000000 0000000000000000 GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR20: c00000062ea70020 c00000062c0c38d0 0000000000000002 0000000000000002 GPR24: c00000062ac3ffe8 00000000275b19c4 0000000000000001 c00000062ac30000 GPR28: c00000062c0c38d0 c00000062ac30050 c00000062ac30058 0000000000000000 NIP memcmp+0x120/0x690 LR xfs_attr3_leaf_lookup_int+0x53c/0x5b0 Call Trace: xfs_attr3_leaf_lookup_int+0x78/0x5b0 (unreliable) xfs_da3_node_lookup_int+0x32c/0x5a0 xfs_attr_node_addname+0x170/0x6b0 xfs_attr_set+0x2ac/0x340 __xfs_set_acl+0xf0/0x230 xfs_set_acl+0xd0/0x160 set_posix_acl+0xc0/0x130 posix_acl_xattr_set+0x68/0x110 __vfs_setxattr+0xa4/0x110 __vfs_setxattr_noperm+0xac/0x240 vfs_setxattr+0x128/0x130 setxattr+0x248/0x600 path_setxattr+0x108/0x120 sys_setxattr+0x28/0x40 system_call+0x5c/0x70 Instruction dump: 7d201c28 7d402428 7c295040 38630008 38840008 408201f0 4200ffe8 2c050000 4182ff6c 20c50008 54c61838 7d201c28 <7d402428> 7d293436 7d4a3436 7c295040 The instruction dump decodes as: subfic r6,r5,8 rlwinm r6,r6,3,0,28 ldbrx r9,0,r3 ldbrx r10,0,r4 <- Which shows us doing an 8 byte load from c00000062ac3fff9, which crosses the page boundary at c00000062ac40000 and faults. It's not OK for memcmp to read past the end of the source or destination buffers if that would cross a page boundary, because we don't know that the next page is mapped. As pointed out by Segher, we can read past the end of the source or destination as long as we don't cross a 4K boundary, because that's our minimum page size on all platforms. The bug is in the code at the .Lcmp_rest_lt8bytes label. When we get there we know that s1 is 8-byte aligned and we have at least 1 byte to read, so a single 8-byte load won't read past the end of s1 and cross a page boundary. But we have to be more careful with s2. So check if it's within 8 bytes of a 4K boundary and if so go to the byte-by-byte loop. Fixes: 2d9ee327adce ("powerpc/64: Align bytes before fall back to .Lshort in powerpc64 memcmp()") Cc: stable@vger.kernel.org # v4.19+ Reported-by: Chandan Rajendra <chandan@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org> Tested-by: Chandan Rajendra <chandan@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-03-25ARM: dts: rockchip: Remove #address/#size-cells from rk3288-veyron gpio-keysDouglas Anderson
They are pointless. As dtc points out: Warning (avoid_unnecessary_addr_size): /gpio-keys: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property Let's remove them. Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-03-25ARM: dts: rockchip: Remove #address/#size-cells from rk3288 mipi_dsiDouglas Anderson
They are pointless. As dtc points out: Warning (avoid_unnecessary_addr_size): /mipi@ff960000: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property Let's remove them. Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-03-25ARM: dts: rockchip: Fix gpu opp node names for rk3288Douglas Anderson
The device tree compiler yells like this: Warning (unit_address_vs_reg): /gpu-opp-table/opp@100000000: node has a unit name, but no reg property Let's match the cpu opp node names and use a dash. Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-03-25ASoC: dapm: Fix NULL pointer dereference in snd_soc_dapm_free_kcontrolPankaj Bharadiya
w_text_param can be NULL and it is being dereferenced without checking. Add the missing sanity check to prevent NULL pointer dereference. Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-03-25clk: meson: pll: fix rounding and setting a rate that matches preciselyMartin Blumenstingl
Make meson_clk_pll_is_better() consider a rate that precisely matches the requested rate to be better than any previous rate (which was smaller than the current). Prior to commit 8eed1db1adec6a ("clk: meson: pll: update driver for the g12a") meson_clk_get_pll_settings() returned early (before calling meson_clk_pll_is_better()) if the rate from the current iteration matches the requested rate precisely. After this commit meson_clk_pll_is_better() is called unconditionally. This requires meson_clk_pll_is_better() to work with the case where "now == rate". This fixes a hang during boot on Meson8b / Odroid-C1 for me. Fixes: 8eed1db1adec6a ("clk: meson: pll: update driver for the g12a") Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lkml.kernel.org/r/20190324164327.22590-2-martin.blumenstingl@googlemail.com
2019-03-25drm/bridge: dw-hdmi: disable SCDC configuration for invalid setupsNeil Armstrong
This patch is an attempt to limit HDMI 2.0 SCDC setup when : - the SoC embeds an HDMI 1.4 only controller - the EDID supports SCDC but not scrambling - the EDID supports SCDC scrambling but not for low TMDS bit rates, while only supporting low TMDS bit rates This to avoid communicating with the SCDC DDC slave uncessary, and setting the DW-HDMI TMDS Scrambler setup when not supported by the underlying hardware. Reported-by: Rob Herring <robh@kernel.org> Fixes: 264fce6cc2c1 ("drm/bridge: dw-hdmi: Add SCDC and TMDS Scrambling support") Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Tested-by: Rob Herring <robh@kernel.org> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190315095414.28520-1-narmstrong@baylibre.com
2019-03-25ASoC: intel: Fix crash at suspend/resume after failed codec registrationGuenter Roeck
If codec registration fails after the ASoC Intel SST driver has been probed, the kernel will Oops and crash at suspend/resume. general protection fault: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 1 PID: 2811 Comm: cat Tainted: G W 4.19.30 #15 Hardware name: GOOGLE Clapper, BIOS Google_Clapper.5216.199.7 08/22/2014 RIP: 0010:snd_soc_suspend+0x5a/0xd21 Code: 03 80 3c 10 00 49 89 d7 74 0b 48 89 df e8 71 72 c4 fe 4c 89 fa 48 8b 03 48 89 45 d0 48 8d 98 a0 01 00 00 48 89 d8 48 c1 e8 03 <8a> 04 10 84 c0 0f 85 85 0c 00 00 80 3b 00 0f 84 6b 0c 00 00 48 8b RSP: 0018:ffff888035407750 EFLAGS: 00010202 RAX: 0000000000000034 RBX: 00000000000001a0 RCX: 0000000000000000 RDX: dffffc0000000000 RSI: 0000000000000008 RDI: ffff88805c417098 RBP: ffff8880354077b0 R08: dffffc0000000000 R09: ffffed100b975718 R10: 0000000000000001 R11: ffffffff949ea4a3 R12: 1ffff1100b975746 R13: dffffc0000000000 R14: ffff88805cba4588 R15: dffffc0000000000 FS: 0000794a78e91b80(0000) GS:ffff888068d00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007bd5283ccf58 CR3: 000000004b7aa000 CR4: 00000000001006e0 Call Trace: ? dpm_complete+0x67b/0x67b ? i915_gem_suspend+0x14d/0x1ad sst_soc_prepare+0x91/0x1dd ? sst_be_hw_params+0x7e/0x7e dpm_prepare+0x39a/0x88b dpm_suspend_start+0x13/0x9d suspend_devices_and_enter+0x18f/0xbd7 ? arch_suspend_enable_irqs+0x11/0x11 ? printk+0xd9/0x12d ? lock_release+0x95f/0x95f ? log_buf_vmcoreinfo_setup+0x131/0x131 ? rcu_read_lock_sched_held+0x140/0x22a ? __bpf_trace_rcu_utilization+0xa/0xa ? __pm_pr_dbg+0x186/0x190 ? pm_notifier_call_chain+0x39/0x39 ? suspend_test+0x9d/0x9d pm_suspend+0x2f4/0x728 ? trace_suspend_resume+0x3da/0x3da ? lock_release+0x95f/0x95f ? kernfs_fop_write+0x19f/0x32d state_store+0xd8/0x147 ? sysfs_kf_read+0x155/0x155 kernfs_fop_write+0x23e/0x32d __vfs_write+0x108/0x608 ? vfs_read+0x2e9/0x2e9 ? rcu_read_lock_sched_held+0x140/0x22a ? __bpf_trace_rcu_utilization+0xa/0xa ? debug_smp_processor_id+0x10/0x10 ? selinux_file_permission+0x1c5/0x3c8 ? rcu_sync_lockdep_assert+0x6a/0xad ? __sb_start_write+0x129/0x2ac vfs_write+0x1aa/0x434 ksys_write+0xfe/0x1be ? __ia32_sys_read+0x82/0x82 do_syscall_64+0xcd/0x120 entry_SYSCALL_64_after_hwframe+0x49/0xbe In the observed situation, the problem is seen because the codec driver failed to probe due to a hardware problem. max98090 i2c-193C9890:00: Failed to read device revision: -1 max98090 i2c-193C9890:00: ASoC: failed to probe component -1 cht-bsw-max98090 cht-bsw-max98090: ASoC: failed to instantiate card -1 cht-bsw-max98090 cht-bsw-max98090: snd_soc_register_card failed -1 cht-bsw-max98090: probe of cht-bsw-max98090 failed with error -1 The problem is similar to the problem solved with commit 2fc995a87f2e ("ASoC: intel: Fix crash at suspend/resume without card registration"), but codec registration fails at a later point. At that time, the pointer checked with the above mentioned commit is already set, but it is not cleared if the device is subsequently removed. Adding a remove function to clear the pointer fixes the problem. Cc: stable@vger.kernel.org Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: Curtis Malainey <cujomalainey@chromium.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-03-25drm/meson: fix TMDS clock filtering for DMT monitorsNeil Armstrong
DMT monitors does not necessarely report a maximum TMDS clock in a VSDB EDID extension. In this case, all modes are wrongly rejected, including the DRM fallback EDID. This patch only rejects modes whith clock > max_tmds_clock if the max_tmds_clock is specified. This will only reject 4:2:0 HDMI2.0 modes, who reports a clock > max_tmds_clock. Reported-by: Maxime Jourdan <mjourdan@baylibre.com> Fixes: d7d8fb7046b6 ("drm/meson: add HDMI div40 TMDS mode") Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Tested-by: Maxime Jourdan <mjourdan@baylibre.com> Reviewed-by: Maxime Jourdan <mjourdan@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190320081110.1718-1-narmstrong@baylibre.com
2019-03-25drm/meson: Uninstall IRQ handlerJean-Philippe Brucker
meson_drv_unbind() doesn't unregister the IRQ handler, which can lead to use-after-free if the IRQ fires after unbind: [ 64.656876] Unable to handle kernel paging request at virtual address ffff000011706dbc ... [ 64.662001] pc : meson_irq+0x18/0x30 [meson_drm] I'm assuming that a similar problem could happen on the error path of bind(), so uninstall the IRQ handler there as well. Fixes: bbbe775ec5b5 ("drm: Add support for Amlogic Meson Graphic Controller") Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190322152657.13752-2-jean-philippe.brucker@arm.com
2019-03-25drm/meson: Fix invalid pointer in meson_drv_unbind()Jean-Philippe Brucker
meson_drv_bind() registers a meson_drm struct as the device's privdata, but meson_drv_unbind() tries to retrieve a drm_device. This may cause a segfault on shutdown: [ 5194.593429] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000197 ... [ 5194.788850] Call trace: [ 5194.791349] drm_dev_unregister+0x1c/0x118 [drm] [ 5194.795848] meson_drv_unbind+0x50/0x78 [meson_drm] Retrieve the right pointer in meson_drv_unbind(). Fixes: bbbe775ec5b5 ("drm: Add support for Amlogic Meson Graphic Controller") Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190322152657.13752-1-jean-philippe.brucker@arm.com
2019-03-25Merge tag 'drm-misc-next-2019-03-21' of ↵Daniel Vetter
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for 5.2: UAPI Changes: - Add Colorspace connector property (Uma) - fourcc: Several new YUV formats from ARM (Brian & Ayan) - fourcc: Fix merge conflicts between new formats above and Swati's that went in via topic/hdr-formats-2019-03-07 branch (Maarten) Cross-subsystem Changes: - Typed component support via topic/component-typed-2019-02-11 (Maxime/Daniel) Core Changes: - Improve component helper documentation (Daniel) - Avoid calling drm_dev_unregister() twice on unplugged devices (Noralf) - Add device managed (devm) drm_device init function (Noralf) - Graduate TINYDRM_MODE to DRM_SIMPLE_MODE in core (Noralf) - Move MIPI/DSI rate control params computation into core from i915 (David) - Add support for shmem backed gem objects (Noralf) Driver Changes: - various: Use of_node_name_eq for node name comparisons (Rob Herring) - sun4i: Add DSI burst mode support (Konstantin) - panel: Add Ronbo RB070D30 MIPI/DSI panel support (Konstantin) - virtio: A few prime improvements (Gerd) - tinydrm: Remove tinydrm_device (Noralf) - vc4: Add load tracker to driver to detect underflow in atomic check (Boris) - vboxvideo: Move it out of staging \o/ (Hans) - v3d: Add support for V3D v4.2 (Eric) Cc: Konstantin Sudakov <k.sudakov@integrasources.com> Cc: Rob Herring <robh@kernel.org> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Uma Shankar <uma.shankar@intel.com> Cc: Noralf Trønnes <noralf@tronnes.org> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: David Francis <David.Francis@amd.com> Cc: Boris Brezillon <boris.brezillon@bootlin.com> Cc: Eric Anholt <eric@anholt.net> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Brian Starkey <brian.starkey@arm.com> Cc: Ayan Kumar Halder <ayan.halder@arm.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: Sean Paul <sean@poorly.run> Link: https://patchwork.freedesktop.org/patch/msgid/20190321170805.GA50145@art_vandelay
2019-03-25ACPI: use different default debug value than ACPICAErik Schmauss
Rather than setting debug output flags during early init, its makes more sense to simply re-define ACPI_DEBUG_DEFAULT specifically for Linux. ACPICA commit 60903715711f4b00ca1831779a8a23279a66497d Link: https://github.com/acpica/acpica/commit/60903715 Fixes: ce5cbf53496b ("ACPI: Set debug output flags independent of ACPICA") Reported-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Signed-off-by: Erik Schmauss <erik.schmauss@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-03-25drm/i915: Report the correct errno from i915_gem_context_open()Chris Wilson
Fixup the errno as we adjusted the error path to receive the errno and not compute it itself from ERR_PTR(ctx) anymore. drivers/gpu/drm/i915/i915_gem_context.c:793 i915_gem_context_open() warn: passing a valid pointer to 'PTR_ERR' Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Fixes: 3aa9945a528e ("drm/i915: Separate GEM context construction and registration to userspace") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190325090413.19906-2-chris@chris-wilson.co.uk
2019-03-25drm: vkms: check status of alloc_ordered_workqueueKangjie Lu
alloc_ordered_workqueue may fail and return NULL. The fix returns ENOMEM when it fails to avoid potential NULL pointer dereference. Signed-off-by: Kangjie Lu <kjlu@umn.edu> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20190309043628.6078-1-kjlu@umn.edu
2019-03-25drm/doc: fix missing verbLuca Ceresoli
Add a missing "be". While there, also fix the syntax for struct drm_device. Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20190313153537.22654-2-luca@lucaceresoli.net
2019-03-25drm/hibmc: Drop best_encoderDaniel Vetter
This is the default for atomic drivers. Acked-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Noralf Trønnes <noralf@tronnes.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190221155857.19773-1-daniel.vetter@ffwll.ch
2019-03-25batman-adv: Fix genl notification for throughput_overrideSven Eckelmann
The throughput_override sysfs file is not below the meshif but below a hardif. The kobj has therefore not a pointer which can be used to find the batadv_priv data. The pointer stored in the hardif object must be used instead to find the correct meshif private data. Fixes: 7e6f461efe25 ("batman-adv: Trigger genl notification on sysfs config change") Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2019-03-25batman-adv: fix warning in function batadv_v_elp_get_throughputAnders Roxell
When CONFIG_CFG80211 isn't enabled the compiler correcly warns about 'sinfo.pertid' may be unused. It can also happen for other error conditions that it not warn about. net/batman-adv/bat_v_elp.c: In function ‘batadv_v_elp_get_throughput.isra.0’: include/net/cfg80211.h:6370:13: warning: ‘sinfo.pertid’ may be used uninitialized in this function [-Wmaybe-uninitialized] kfree(sinfo->pertid); ~~~~~^~~~~~~~ Rework so that we only release '&sinfo' if cfg80211_get_station returns zero. Fixes: 7d652669b61d ("batman-adv: release station info tidstats") Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2019-03-25batman-adv: Reduce tt_global hash refcnt only for removed entrySven Eckelmann
The batadv_hash_remove is a function which searches the hashtable for an entry using a needle, a hashtable bucket selection function and a compare function. It will lock the bucket list and delete an entry when the compare function matches it with the needle. It returns the pointer to the hlist_node which matches or NULL when no entry matches the needle. The batadv_tt_global_free is not itself protected in anyway to avoid that any other function is modifying the hashtable between the search for the entry and the call to batadv_hash_remove. It can therefore happen that the entry either doesn't exist anymore or an entry was deleted which is not the same object as the needle. In such an situation, the reference counter (for the reference stored in the hashtable) must not be reduced for the needle. Instead the reference counter of the actually removed entry has to be reduced. Otherwise the reference counter will underflow and the object might be freed before all its references were dropped. The kref helpers reported this problem as: refcount_t: underflow; use-after-free. Fixes: 7683fdc1e886 ("batman-adv: protect the local and the global trans-tables with rcu") Reported-by: Martin Weinelt <martin@linuxlounge.net> Signed-off-by: Sven Eckelmann <sven@narfation.org> Acked-by: Antonio Quartulli <a@unstable.cc> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2019-03-25batman-adv: Reduce tt_local hash refcnt only for removed entrySven Eckelmann
The batadv_hash_remove is a function which searches the hashtable for an entry using a needle, a hashtable bucket selection function and a compare function. It will lock the bucket list and delete an entry when the compare function matches it with the needle. It returns the pointer to the hlist_node which matches or NULL when no entry matches the needle. The batadv_tt_local_remove is not itself protected in anyway to avoid that any other function is modifying the hashtable between the search for the entry and the call to batadv_hash_remove. It can therefore happen that the entry either doesn't exist anymore or an entry was deleted which is not the same object as the needle. In such an situation, the reference counter (for the reference stored in the hashtable) must not be reduced for the needle. Instead the reference counter of the actually removed entry has to be reduced. Otherwise the reference counter will underflow and the object might be freed before all its references were dropped. The kref helpers reported this problem as: refcount_t: underflow; use-after-free. Fixes: ef72706a0543 ("batman-adv: protect tt_local_entry from concurrent delete events") Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2019-03-25batman-adv: Reduce claim hash refcnt only for removed entrySven Eckelmann
The batadv_hash_remove is a function which searches the hashtable for an entry using a needle, a hashtable bucket selection function and a compare function. It will lock the bucket list and delete an entry when the compare function matches it with the needle. It returns the pointer to the hlist_node which matches or NULL when no entry matches the needle. The batadv_bla_del_claim is not itself protected in anyway to avoid that any other function is modifying the hashtable between the search for the entry and the call to batadv_hash_remove. It can therefore happen that the entry either doesn't exist anymore or an entry was deleted which is not the same object as the needle. In such an situation, the reference counter (for the reference stored in the hashtable) must not be reduced for the needle. Instead the reference counter of the actually removed entry has to be reduced. Otherwise the reference counter will underflow and the object might be freed before all its references were dropped. The kref helpers reported this problem as: refcount_t: underflow; use-after-free. Fixes: 23721387c409 ("batman-adv: add basic bridge loop avoidance code") Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2019-03-25gpio: aspeed: fix a potential NULL pointer dereferenceKangjie Lu
In case devm_kzalloc, the patch returns ENOMEM to avoid potential NULL pointer dereference. Signed-off-by: Kangjie Lu <kjlu@umn.edu> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-03-25drm/i915: Use vblank_disable_immediate on gen2Ville Syrjälä
The vblank timestamp->counter guesstimator seems to be working sufficiently well, so there's no reason not to disable vblank interrupts ASAP even on gen2. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190322180804.3300-2-ville.syrjala@linux.intel.com Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
2019-03-25drm/i915: Disable C3 when enabling vblank interrupts on i945gmVille Syrjälä
The AGPBUSY thing doesn't work on i945gm anymore. This means the gmch is incapable of waking the CPU from C3 when an interrupt is generated. The interrupts just get postponed indefinitely until something wakes up the CPU. This is rather annoying for vblank interrupts as we are unable to maintain a steady framerate unless the machine is sufficiently loaded to stay out of C3. To combat this let's use pm_qos to prevent C3 whenever vblank interrupts are enabled. To maintain reasonable amount of powersaving we will attempt to limit this to C3 only while leaving C1 and C2 enabled. v2: Use READ_ONCE() (Chris) Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=30364 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190322180804.3300-1-ville.syrjala@linux.intel.com Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
2019-03-25drm/i915: Mark AML 0x87CA as ULXVille Syrjälä
If I'm reading the spec right AML 0x87CA is a Y SKU, so it should be marked as ULX in our old style terminology. Cc: stable@vger.kernel.org Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Fixes: c0c46ca461f1 ("drm/i915/aml: Add new Amber Lake PCI ID") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190322204944.23613-1-ville.syrjala@linux.intel.com Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
2019-03-25drm/udl: Refactor edid retrieving in UDL driver (v2)Robert Tarasov
Now drm/udl driver uses drm_do_get_edid() function to retrieve and validate all blocks of EDID data. Old approach had insufficient validation routine and had problems with retrieving of extra blocks Signed-off-by: Robert Tarasov <tutankhamen@chromium.org> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com> [airlied: Fix spelling mistakes] Link: https://patchwork.freedesktop.org/patch/msgid/20190314225339.162386-1-tutankhamen@chromium.org
2019-03-25drm: Fix drm_release() and device unplugNoralf Trønnes
If userspace has open fd(s) when drm_dev_unplug() is run, it will result in drm_dev_unregister() being called twice. First in drm_dev_unplug() and then later in drm_release() through the call to drm_put_dev(). Since userspace already holds a ref on drm_device through the drm_minor, it's not necessary to add extra ref counting based on no open file handles. Instead just drm_dev_put() unconditionally in drm_dev_unplug(). We now have this: - Userpace holds a ref on drm_device as long as there's open fd(s) - The driver holds a ref on drm_device as long as it's bound to the struct device When both sides are done with drm_device, it is released. Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Sean Paul <sean@poorly.run> Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190208140103.28919-2-noralf@tronnes.org
2019-03-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller
Alexei Starovoitov says: ==================== pull-request: bpf 2019-03-24 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) libbpf verision fix up from Daniel. 2) fix liveness propagation from Jakub. 3) fix verbose print of refcounted regs from Martin. 4) fix for large map allocations from Martynas. 5) fix use after free in sanitize_ptr_alu from Xu. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-24Merge branch 'libbpf-fixup'Alexei Starovoitov
Daniel Borkmann says: ==================== First one is fixing version in Makefile and shared object and second one clarifies bump in version. Thanks! v1 -> v2: - Fix up soname, thanks Stanislav! ==================== Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-03-24bpf, libbpf: clarify bump in libbpf version infoDaniel Borkmann
The current documentation suggests that we would need to bump the libbpf version on every change. Lets clarify this a bit more and reflect what we do today in practice, that is, bumping it once per development cycle. Fixes: 76d1b894c515 ("libbpf: Document API and ABI conventions") Reported-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-03-24bpf, libbpf: fix version info and add it to shared objectDaniel Borkmann
Even though libbpf's versioning script for the linker (libbpf.map) is pointing to 0.0.2, the BPF_EXTRAVERSION in the Makefile has not been updated along with it and is therefore still on 0.0.1. While fixing up, I also noticed that the generated shared object versioning information is missing, typical convention is to have a linker name (libbpf.so), soname (libbpf.so.0) and real name (libbpf.so.0.0.2) for library management. This is based upon the LIBBPF_VERSION as well. The build will then produce the following bpf libraries: # ll libbpf* libbpf.a libbpf.so -> libbpf.so.0.0.2 libbpf.so.0 -> libbpf.so.0.0.2 libbpf.so.0.0.2 # readelf -d libbpf.so.0.0.2 | grep SONAME 0x000000000000000e (SONAME) Library soname: [libbpf.so.0] And install them accordingly: # rm -rf /tmp/bld; mkdir /tmp/bld; make -j$(nproc) O=/tmp/bld install Auto-detecting system features: ... libelf: [ on ] ... bpf: [ on ] CC /tmp/bld/libbpf.o CC /tmp/bld/bpf.o CC /tmp/bld/nlattr.o CC /tmp/bld/btf.o CC /tmp/bld/libbpf_errno.o CC /tmp/bld/str_error.o CC /tmp/bld/netlink.o CC /tmp/bld/bpf_prog_linfo.o CC /tmp/bld/libbpf_probes.o CC /tmp/bld/xsk.o LD /tmp/bld/libbpf-in.o LINK /tmp/bld/libbpf.a LINK /tmp/bld/libbpf.so.0.0.2 LINK /tmp/bld/test_libbpf INSTALL /tmp/bld/libbpf.a INSTALL /tmp/bld/libbpf.so.0.0.2 # ll /usr/local/lib64/libbpf.* /usr/local/lib64/libbpf.a /usr/local/lib64/libbpf.so -> libbpf.so.0.0.2 /usr/local/lib64/libbpf.so.0 -> libbpf.so.0.0.2 /usr/local/lib64/libbpf.so.0.0.2 Fixes: 1bf4b05810fe ("tools: bpftool: add probes for eBPF program types") Fixes: 1b76c13e4b36 ("bpf tools: Introduce 'bpf' library and add bpf feature check") Reported-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-03-25Merge tag 'du-next-20190318' of git://linuxtv.org/pinchartl/media into drm-nextDave Airlie
Renesas display drivers changes for v5.2: - Display writeback (includes VSP changes and DRM/KMS API changes) (All v4l patches acked by Mauro) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190318153613.GE12707@pendragon.ideasonboard.com
2019-03-25Merge tag 'omapdrm-5.2' of ↵Dave Airlie
git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux into drm-next omapdrm changes for 5.2 - Implement drm_bridge and drm_panel support for omapdrm - Drop omapdrm's panel-dpi, tfp410 and connector-dvi drivers - New DRM_BUS_FLAG_*_(DRIVE|SAMPLE)_(POS|NEG)EDGE flags - Improvements to tfp410 driver - OSD070T1718-19TS panel support to simple-panel - panel-tpo-td028ttec1 backlight support Signed-off-by: Dave Airlie <airlied@redhat.com> From: Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/670dc1ce-feaf-b88e-780f-b99251b88a82@ti.com
2019-03-25Merge tag 'drm/tegra/for-5.1-rc2' of ↵Dave Airlie
git://anongit.freedesktop.org/tegra/linux into drm-fixes drm/tegra: Fixes for v5.1-rc2 These are a couple of minor fixes for build issues and sparse warnings. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thierry Reding <thierry.reding@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190322131517.825-1-thierry.reding@gmail.com
2019-03-25drm/fb: avoid setting 0 depth.Dave Airlie
If the downscaling fails and we end up with a best_depth of 0, then ignore it. This actually works around a cascade of failure, but it the simplest fix for now. The scaling patch broke the udl driver, as the udl driver doesn't expose planes at all, so gets the two default 32-bit formats, but the udl driver then ask for 16bpp fbdev, and the scaling code falls over. This fixes the udl driver since the scaled depth support was added. Fixes: f4bd542bcaee ("drm/fb-helper: Scale back depth to supported maximum") Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190315014621.21816-2-airlied@gmail.com
2019-03-24drm/i915: Remove defunct intel_suspend_gt_powersave()Chris Wilson
Since commit b7137e0cf1e5 ("drm/i915: Defer enabling rc6 til after we submit the first batch/context"), intel_suspend_gt_powersave() has been a no-op. As we still do not need to do anything explicitly on suspend (we do everything required on idling), remove the defunct function. References: b7137e0cf1e5 ("drm/i915: Defer enabling rc6 til after we submit the first batch/context") Suggested-by: "Hiatt, Don" <don.hiatt@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190323214009.23294-1-chris@chris-wilson.co.uk
2019-03-24x86/resctrl: Remove unused variablePeng Hao
Variable "struct rdt_resource *r" is set but not used. So remove it. Signed-off-by: Peng Hao <peng.hao2@zte.com.cn> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/1552152584-26087-1-git-send-email-peng.hao2@zte.com.cn
2019-03-24Linux 5.1-rc2v5.1-rc2Linus Torvalds
2019-03-24Merge tag 'ext4_for_linus_stable' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 fixes from Ted Ts'o: "Miscellaneous ext4 bug fixes for 5.1" * tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: prohibit fstrim in norecovery mode ext4: cleanup bh release code in ext4_ind_remove_space() ext4: brelse all indirect buffer in ext4_ind_remove_space() ext4: report real fs size after failed resize ext4: add missing brelse() in add_new_gdb_meta_bg() ext4: remove useless ext4_pin_inode() ext4: avoid panic during forced reboot ext4: fix data corruption caused by unaligned direct AIO ext4: fix NULL pointer dereference while journal is aborted
2019-03-24Merge branch 'sched-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler updates from Thomas Gleixner: "Third more careful attempt for this set of fixes: - Prevent a 32bit math overflow in the cpufreq code - Fix a buffer overflow when scanning the cgroup2 cpu.max property - A set of fixes for the NOHZ scheduler logic to prevent waking up CPUs even if the capacity of the busy CPUs is sufficient along with other tweaks optimizing the behaviour for asymmetric systems (big/little)" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/fair: Skip LLC NOHZ logic for asymmetric systems sched/fair: Tune down misfit NOHZ kicks sched/fair: Comment some nohz_balancer_kick() kick conditions sched/core: Fix buffer overflow in cgroup2 property cpu.max sched/cpufreq: Fix 32-bit math overflow
2019-03-24Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf updates from Thomas Gleixner: "A larger set of perf updates. Not all of them are strictly fixes, but that's solely the tip maintainers fault as they let the timely -rc1 pull request fall through the cracks for various reasons including travel. So I'm sending this nevertheless because rebasing and distangling fixes and updates would be a mess and risky as well. As of tomorrow, a strict fixes separation is happening again. Sorry for the slip-up. Kernel: - Handle RECORD_MMAP vs. RECORD_MMAP2 correctly so different consumers of the mmap event get what they requested. Tools: - A larger set of updates to perf record/report/scripts vs. time stamp handling - More Python3 fixups - A pile of memory leak plumbing - perf BPF improvements and fixes - Finalize the perf.data directory storage" [ Note: the kernel part is strictly a fix, the updates are purely to tooling - Linus ] * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (75 commits) perf bpf: Show more BPF program info in print_bpf_prog_info() perf bpf: Extract logic to create program names from perf_event__synthesize_one_bpf_prog() perf tools: Save bpf_prog_info and BTF of new BPF programs perf evlist: Introduce side band thread perf annotate: Enable annotation of BPF programs perf build: Check what binutils's 'disassembler()' signature to use perf bpf: Process PERF_BPF_EVENT_PROG_LOAD for annotation perf symbols: Introduce DSO_BINARY_TYPE__BPF_PROG_INFO perf feature detection: Add -lopcodes to feature-libbfd perf top: Add option --no-bpf-event perf bpf: Save BTF information as headers to perf.data perf bpf: Save BTF in a rbtree in perf_env perf bpf: Save bpf_prog_info information as headers to perf.data perf bpf: Save bpf_prog_info in a rbtree in perf_env perf bpf: Make synthesize_bpf_events() receive perf_session pointer instead of perf_tool perf bpf: Synthesize bpf events with bpf_program__get_prog_info_linear() bpftool: use bpf_program__get_prog_info_linear() in prog.c:do_dump() tools lib bpf: Introduce bpf_program__get_prog_info_linear() perf record: Replace option --bpf-event with --no-bpf-event perf tests: Fix a memory leak in test__perf_evsel__tp_sched_test() ...
generated by cgit (git 2.34.1) at 2025-09-24 02:46:40 +0000