summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-11-27media: Documentation: userspace-api/media: dvb/ca: drop doubled wordRandy Dunlap
Drop the doubled word "and". Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: linux-doc@vger.kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-11-27media: Remove superfluous dependency for MEDIA_SUPPORT_FILTERGeert Uytterhoeven
The MEDIA_SUPPORT_FILTER configuration option is located inside a block protected by "#if MEDIA_SUPPORT", so there is no need to have an explicit dependency on MEDIA_SUPPORT. Drop it. Fixes: c6774ee035dcb878 ("media: Kconfig: make filtering devices optional") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-11-27netfilter: nftables_offload: build mask based from the matching bytesPablo Neira Ayuso
Userspace might match on prefix bytes of header fields if they are on the byte boundary, this requires that the mask is adjusted accordingly. Use NFT_OFFLOAD_MATCH_EXACT() for meta since prefix byte matching is not allowed for this type of selector. The bitwise expression might be optimized out by userspace, hence the kernel needs to infer the prefix from the number of payload bytes to match on. This patch adds nft_payload_offload_mask() to calculate the bitmask to match on the prefix. Fixes: c9626a2cbdb2 ("netfilter: nf_tables: add hardware offload support") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-11-27netfilter: nftables_offload: set address type in control dissectorPablo Neira Ayuso
This patch adds nft_flow_rule_set_addr_type() to set the address type from the nft_payload expression accordingly. If the address type is not set in the control dissector then a rule that matches either on source or destination IP address does not work. After this patch, nft hardware offload generates the flow dissector configuration as tc-flower does to match on an IP address. This patch has been also tested functionally to make sure packets are filtered out by the NIC. This is also getting the code aligned with the existing netfilter flow offload infrastructure which is also setting the control dissector. Fixes: c9626a2cbdb2 ("netfilter: nf_tables: add hardware offload support") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-11-27ipvs: fix possible memory leak in ip_vs_control_net_initWang Hai
kmemleak report a memory leak as follows: BUG: memory leak unreferenced object 0xffff8880759ea000 (size 256): backtrace: [<00000000c0bf2deb>] kmem_cache_zalloc include/linux/slab.h:656 [inline] [<00000000c0bf2deb>] __proc_create+0x23d/0x7d0 fs/proc/generic.c:421 [<000000009d718d02>] proc_create_reg+0x8e/0x140 fs/proc/generic.c:535 [<0000000097bbfc4f>] proc_create_net_data+0x8c/0x1b0 fs/proc/proc_net.c:126 [<00000000652480fc>] ip_vs_control_net_init+0x308/0x13a0 net/netfilter/ipvs/ip_vs_ctl.c:4169 [<000000004c927ebe>] __ip_vs_init+0x211/0x400 net/netfilter/ipvs/ip_vs_core.c:2429 [<00000000aa6b72d9>] ops_init+0xa8/0x3c0 net/core/net_namespace.c:151 [<00000000153fd114>] setup_net+0x2de/0x7e0 net/core/net_namespace.c:341 [<00000000be4e4f07>] copy_net_ns+0x27d/0x530 net/core/net_namespace.c:482 [<00000000f1c23ec9>] create_new_namespaces+0x382/0xa30 kernel/nsproxy.c:110 [<00000000098a5757>] copy_namespaces+0x2e6/0x3b0 kernel/nsproxy.c:179 [<0000000026ce39e9>] copy_process+0x220a/0x5f00 kernel/fork.c:2072 [<00000000b71f4efe>] _do_fork+0xc7/0xda0 kernel/fork.c:2428 [<000000002974ee96>] __do_sys_clone3+0x18a/0x280 kernel/fork.c:2703 [<0000000062ac0a4d>] do_syscall_64+0x33/0x40 arch/x86/entry/common.c:46 [<0000000093f1ce2c>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 In the error path of ip_vs_control_net_init(), remove_proc_entry() needs to be called to remove the added proc entry, otherwise a memory leak will occur. Also, add some '#ifdef CONFIG_PROC_FS' because proc_create_net* return NULL when PROC is not used. Fixes: b17fc9963f83 ("IPVS: netns, ip_vs_stats and its procfs") Fixes: 61b1ab4583e2 ("IPVS: netns, add basic init per netns.") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Hai <wanghai38@huawei.com> Acked-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-11-27powerpc/numa: Fix a regression on memoryless node 0Srikar Dronamraju
Commit e75130f20b1f ("powerpc/numa: Offline memoryless cpuless node 0") offlines node 0 and expects nodes to be subsequently onlined when CPUs or nodes are detected. Commit 6398eaa26816 ("powerpc/numa: Prefer node id queried from vphn") skips onlining node 0 when CPUs are associated with node 0. On systems with node 0 having CPUs but no memory, this causes node 0 be marked offline. This causes issues at boot time when trying to set memory node for online CPUs while building the zonelist. 0:mon> t [link register ] c000000000400354 __build_all_zonelists+0x164/0x280 [c00000000161bda0] c0000000016533c8 node_states+0x20/0xa0 (unreliable) [c00000000161bdc0] c000000000400384 __build_all_zonelists+0x194/0x280 [c00000000161be30] c000000001041800 build_all_zonelists_init+0x4c/0x118 [c00000000161be80] c0000000004020d0 build_all_zonelists+0x190/0x1b0 [c00000000161bef0] c000000001003cf8 start_kernel+0x18c/0x6a8 [c00000000161bf90] c00000000000adb4 start_here_common+0x1c/0x3e8 0:mon> r R00 = c000000000400354 R16 = 000000000b57a0e8 R01 = c00000000161bda0 R17 = 000000000b57a6b0 R02 = c00000000161ce00 R18 = 000000000b5afee8 R03 = 0000000000000000 R19 = 000000000b6448a0 R04 = 0000000000000000 R20 = fffffffffffffffd R05 = 0000000000000000 R21 = 0000000001400000 R06 = 0000000000000000 R22 = 000000001ec00000 R07 = 0000000000000001 R23 = c000000001175580 R08 = 0000000000000000 R24 = c000000001651ed8 R09 = c0000000017e84d8 R25 = c000000001652480 R10 = 0000000000000000 R26 = c000000001175584 R11 = c000000c7fac0d10 R27 = c0000000019568d0 R12 = c000000000400180 R28 = 0000000000000000 R13 = c000000002200000 R29 = c00000000164dd78 R14 = 000000000b579f78 R30 = 0000000000000000 R15 = 000000000b57a2b8 R31 = c000000001175584 pc = c000000000400194 local_memory_node+0x24/0x80 cfar= c000000000074334 mcount+0xc/0x10 lr = c000000000400354 __build_all_zonelists+0x164/0x280 msr = 8000000002001033 cr = 44002284 ctr = c000000000400180 xer = 0000000000000001 trap = 380 dar = 0000000000001388 dsisr = c00000000161bc90 0:mon> Fix this by setting node to be online while onlining CPUs that belong to node 0. Fixes: e75130f20b1f ("powerpc/numa: Offline memoryless cpuless node 0") Fixes: 6398eaa26816 ("powerpc/numa: Prefer node id queried from vphn") Reported-by: Milan Mohanty <milmohan@in.ibm.com> Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20201127053738.10085-1-srikar@linux.vnet.ibm.com
2020-11-27printk: finalize records with trailing newlinesJohn Ogness
Any record with a trailing newline (LOG_NEWLINE flag) cannot be continued because the newline has been stripped and will not be visible if the message is appended. This was already handled correctly when committing in log_output() but was not handled correctly when committing in log_store(). Fixes: f5f022e53b87 ("printk: reimplement log_cont using record extension") Link: https://lore.kernel.org/r/20201126114836.14750-1-john.ogness@linutronix.de Reported-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: John Ogness <john.ogness@linutronix.de> Tested-by: Kefeng Wang <wangkefeng.wang@huawei.com> Reviewed-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Petr Mladek <pmladek@suse.com>
2020-11-27tomoyo: Fix null pointer checkZheng Zengkai
Since tomoyo_memory_ok() will check for null pointer returned by kzalloc() in tomoyo_assign_profile(), tomoyo_assign_namespace(), tomoyo_get_name() and tomoyo_commit_ok(), then emit OOM warnings if needed. And this is the expected behavior as informed by Tetsuo Handa. Let's add __GFP_NOWARN to kzalloc() in those related functions. Besides, to achieve this goal, remove the null check for entry right after kzalloc() in tomoyo_assign_namespace(). Reported-by: Hulk Robot <hulkci@huawei.com> Suggested-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Zheng Zengkai <zhengzengkai@huawei.com> Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
2020-11-27media: i2c: imx219: remove redundant writesSameer Puri
These writes to 0x162, 0x163 already appear earlier in the struct for the 1920x1080 mode and do not need to be repeated. Signed-off-by: Sameer Puri <purisame@spuri.io> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-11-27media: mantis: remove redundant assignment to variable errColin Ian King
The variable err is being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-11-27USB: serial: option: add support for Thales Cinterion EXS82Giacinto Cifelli
There is a single option port in this modem, and it is used as debug port. lsusb -v for this device: Bus 001 Device 002: ID 1e2d:006c Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 239 Miscellaneous Device bDeviceSubClass 2 ? bDeviceProtocol 1 Interface Association bMaxPacketSize0 64 idVendor 0x1e2d idProduct 0x006c bcdDevice 0.00 iManufacturer 4 iProduct 3 iSerial 5 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 243 bNumInterfaces 7 bConfigurationValue 1 iConfiguration 2 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 500mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Interface Association: bLength 8 bDescriptorType 11 bFirstInterface 1 bInterfaceCount 2 bFunctionClass 2 Communications bFunctionSubClass 2 Abstract (modem) bFunctionProtocol 1 AT-commands (v.25ter) iFunction 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 2 Communications bInterfaceSubClass 2 Abstract (modem) bInterfaceProtocol 1 AT-commands (v.25ter) iInterface 0 CDC Header: bcdCDC 1.10 CDC ACM: bmCapabilities 0x02 line coding and serial state CDC Call Management: bmCapabilities 0x03 call management use DataInterface bDataInterface 2 CDC Union: bMasterInterface 1 bSlaveInterface 2 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 5 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 2 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 10 CDC Data bInterfaceSubClass 0 Unused bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Interface Association: bLength 8 bDescriptorType 11 bFirstInterface 3 bInterfaceCount 2 bFunctionClass 2 Communications bFunctionSubClass 2 Abstract (modem) bFunctionProtocol 1 AT-commands (v.25ter) iFunction 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 3 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 2 Communications bInterfaceSubClass 2 Abstract (modem) bInterfaceProtocol 1 AT-commands (v.25ter) iInterface 0 CDC Header: bcdCDC 1.10 CDC ACM: bmCapabilities 0x02 line coding and serial state CDC Call Management: bmCapabilities 0x03 call management use DataInterface bDataInterface 4 CDC Union: bMasterInterface 3 bSlaveInterface 4 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x84 EP 4 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 5 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 4 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 10 CDC Data bInterfaceSubClass 0 Unused bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x85 EP 5 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x03 EP 3 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Interface Association: bLength 8 bDescriptorType 11 bFirstInterface 5 bInterfaceCount 2 bFunctionClass 2 Communications bFunctionSubClass 2 Abstract (modem) bFunctionProtocol 1 AT-commands (v.25ter) iFunction 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 5 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 2 Communications bInterfaceSubClass 6 Ethernet Networking bInterfaceProtocol 0 iInterface 0 CDC Header: bcdCDC 1.10 CDC Ethernet: iMacAddress 1 (??) bmEthernetStatistics 0x00000000 wMaxSegmentSize 16384 wNumberMCFilters 0x0001 bNumberPowerFilters 0 CDC Union: bMasterInterface 5 bSlaveInterface 6 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x86 EP 6 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 5 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 6 bAlternateSetting 0 bNumEndpoints 0 bInterfaceClass 10 CDC Data bInterfaceSubClass 0 Unused bInterfaceProtocol 0 iInterface 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 6 bAlternateSetting 1 bNumEndpoints 2 bInterfaceClass 10 CDC Data bInterfaceSubClass 0 Unused bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x87 EP 7 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x04 EP 4 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Signed-off-by: Giacinto Cifelli <gciofono@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2020-11-27media: max2175: fix max2175_set_csm_mode() error codeDan Carpenter
This is supposed to return negative error codes but the type is bool so it returns true instead. Fixes: b47b79d8a231 ("[media] media: i2c: max2175: Add MAX2175 support") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-11-27can: af_can: can_rx_unregister(): remove WARN() statement from list ↵Oliver Hartkopp
operation sanity check To detect potential bugs in CAN protocol implementations (double removal of receiver entries) a WARN() statement has been used if no matching list item was found for removal. The fault injection issued by syzkaller was able to create a situation where the closing of a socket runs simultaneously to the notifier call chain for removing the CAN network device in use. This case is very unlikely in real life but it doesn't break anything. Therefore we just replace the WARN() statement with pr_warn() to preserve the notification for the CAN protocol development. Reported-by: syzbot+381d06e0c8eaacb8706f@syzkaller.appspotmail.com Reported-by: syzbot+d0ddd88c9a7432f041e6@syzkaller.appspotmail.com Reported-by: syzbot+76d62d3b8162883c7d11@syzkaller.appspotmail.com Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Link: https://lore.kernel.org/r/20201126192140.14350-1-socketcan@hartkopp.net Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-11-27can: m_can: m_can_dev_setup(): add support for bosch mcan version 3.3.0Pankaj Sharma
Add support for mcan bit timing and control mode according to bosch mcan IP version 3.3.0. The mcan version read from the Core Release field of CREL register would be 33. Accordingly the properties are to be set for mcan v3.3.0 Signed-off-by: Pankaj Sharma <pankj.sharma@samsung.com> Link: https://lore.kernel.org/r/1606366302-5520-1-git-send-email-pankj.sharma@samsung.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-11-27can: m_can: fix nominal bitiming tseg2 min for version >= 3.1Marc Kleine-Budde
At lest the revision 3.3.0 of the bosch m_can IP core specifies that valid register values for "Nominal Time segment after sample point (NTSEG2)" are from 1 to 127. As the hardware uses a value of one more than the programmed value, mean tseg2_min is 2. This patch fixes the tseg2_min value accordingly. Cc: Dan Murphy <dmurphy@ti.com> Cc: Mario Huettel <mario.huettel@gmx.net> Acked-by: Sriram Dash <sriram.dash@samsung.com> Link: https://lore.kernel.org/r/20201124190751.3972238-1-mkl@pengutronix.de Fixes: b03cfc5bb0e1 ("can: m_can: Enable M_CAN version dependent initialization") Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-11-27can: m_can: m_can_open(): remove IRQF_TRIGGER_FALLING from ↵Marc Kleine-Budde
request_threaded_irq()'s flags The threaded IRQ handler is used for the tcan4x5x driver only. The IRQ pin of the tcan4x5x controller is active low, so better not use IRQF_TRIGGER_FALLING when requesting the IRQ. As this can result in missing interrupts. Further, if the device tree specified the interrupt as "IRQ_TYPE_LEVEL_LOW", unloading and reloading of the driver results in the following error during ifup: | irq: type mismatch, failed to map hwirq-31 for gpio@20a8000! | tcan4x5x spi1.1: m_can device registered (irq=0, version=32) | tcan4x5x spi1.1 can2: TCAN4X5X successfully initialized. | tcan4x5x spi1.1 can2: failed to request interrupt This patch fixes the problem by removing the IRQF_TRIGGER_FALLING from the request_threaded_irq(). Fixes: f524f829b75a ("can: m_can: Create a m_can platform framework") Cc: Dan Murphy <dmurphy@ti.com> Cc: Sriram Dash <sriram.dash@samsung.com> Cc: Pankaj Sharma <pankj.sharma@samsung.com> Link: https://lore.kernel.org/r/20201127093548.509253-1-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-11-27media: c8sectpfe: clean up some indentingDan Carpenter
The "seg_num," line wasn't indented. All the arguments can fit nicely on two lines. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-11-27media: uvcvideo: Use DIV_ROUND_CLOSEST directly to make it readablezhong jiang
The kernel.h macro DIV_ROUND_CLOSEST performs the computation (x + d/2)/d but is perhaps more readable. Signed-off-by: zhong jiang <zhongjiang@huawei.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-11-27media: imx214: Fix stop streamingDaniel Gomez
Stop video streaming when requested. When s_stream is called to stop the video streaming, if/else condition calls start_streaming function instead of the one for stopping it. Fixes: 436190596241 ("media: imx214: Add imx214 camera sensor driver") Signed-off-by: Daniel Gomez <daniel@qtec.com> Signed-off-by: Ricardo Ribalda <ribalda@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-11-27ALSA: hda/realtek - Add new codec supported for ALC897Kailang Yang
Enable new codec supported for ALC897. Signed-off-by: Kailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/3b00520f304842aab8291eb8d9191bd8@realtek.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-11-27media: msi2500: assign SPI bus number dynamicallyAntti Palosaari
SPI bus number must be assigned dynamically for each device, otherwise it will crash when multiple devices are plugged to system. Reported-and-tested-by: syzbot+c60ddb60b685777d9d59@syzkaller.appspotmail.com Cc: stable@vger.kernel.org Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-11-27batman-adv: Don't always reallocate the fragmentation skb headSven Eckelmann
When a packet is fragmented by batman-adv, the original batman-adv header is not modified. Only a new fragmentation is inserted between the original one and the ethernet header. The code must therefore make sure that it has a writable region of this size in the skbuff head. But it is not useful to always reallocate the skbuff by this size even when there would be more than enough headroom still in the skb. The reallocation is just to costly during in this codepath. Fixes: ee75ed88879a ("batman-adv: Fragment and send skbs larger than mtu") Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2020-11-27batman-adv: Reserve needed_*room for fragmentsSven Eckelmann
The batadv net_device is trying to propagate the needed_headroom and needed_tailroom from the lower devices. This is needed to avoid cost intensive reallocations using pskb_expand_head during the transmission. But the fragmentation code split the skb's without adding extra room at the end/beginning of the various fragments. This reduced the performance of transmissions over complex scenarios (batadv on vxlan on wireguard) because the lower devices had to perform the reallocations at least once. Fixes: ee75ed88879a ("batman-adv: Fragment and send skbs larger than mtu") Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2020-11-27batman-adv: Consider fragmentation for needed_headroomSven Eckelmann
If a batman-adv packets has to be fragmented, then the original batman-adv packet header is not stripped away. Instead, only a new header is added in front of the packet after it was split. This size must be considered to avoid cost intensive reallocations during the transmission through the various device layers. Fixes: 7bca68c7844b ("batman-adv: Add lower layer needed_(head|tail)room to own ones") Reported-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2020-11-27media: usb: msi2500: Fix a possible null-pointer dereference in ↵Jia-Ju Bai
msi2500_stop_streaming() In msi2500_stop_streaming(), there is an if statement on line 870 to check whether dev->udev is NULL: if (dev->udev) When dev->udev is NULL, it is used on line 877: msi2500_ctrl_msg(dev, CMD_STOP_STREAMING, 0) usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, 0), ...) Thus, a possible null-pointer dereference may occur. To fix this bug, dev->udev is checked before calling msi2500_ctrl_msg(). This bug is found by a static analysis tool STCheck written by us. Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-11-27media: platform: sti: c8sectpfe: core: Add of_node_put() at gotoNishka Dasgupta
Each iteration of for_each_child_of_node puts the previous node, but in the case of a goto from the middle of the loop, there is no put, thus causing a memory leak. Hence add a new label that puts the last used node, and edit the goto statements in the middle of the loop to first go to the new label. Issue found with Coccinelle. Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com> Acked-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-11-27media: gp8psk: initialize stats at power control logicMauro Carvalho Chehab
As reported on: https://lore.kernel.org/linux-media/20190627222020.45909-1-willemdebruijn.kernel@gmail.com/ if gp8psk_usb_in_op() returns an error, the status var is not initialized. Yet, this var is used later on, in order to identify: - if the device was already started; - if firmware has loaded; - if the LNBf was powered on. Using status = 0 seems to ensure that everything will be properly powered up. So, instead of the proposed solution, let's just set status = 0. Reported-by: syzbot <syzkaller@googlegroups.com> Reported-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-11-27Merge tag 'drm-misc-fixes-2020-11-26' of ↵Dave Airlie
ssh://git.freedesktop.org/git/drm/drm-misc into drm-fixes A bunch of fixes for vc4 fixing some coexistence issue between wifi and HDMI, unsupported modes, and vblank timeouts, a fix for ast to reload the gamma LUT after changing the plane format and a double-free fix for nouveau Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20201126085450.r3i7wvj7pizsa4l6@gilmour
2020-11-27Merge tag 'mediatek-drm-fixes-5.10' of ↵Dave Airlie
https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-fixes Mediatek DRM Fixes for Linux 5.10 1. Remove unused variable. 2. Modify horizontal front/back porch byte formula. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Chun-Kuang Hu <chunkuang.hu@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20201123234131.387-1-chunkuang.hu@kernel.org
2020-11-27Merge tag 'drm-misc-next-2020-11-18' of ↵Dave Airlie
ssh://git.freedesktop.org/git/drm/drm-misc into drm-next drm-misc-next for 5.11: UAPI Changes: * media: Add MEDIA_BUS_FMT_RGB888_3X8_DELTA format Cross-subsystem Changes: * console: Remove unused functions; Store characters-per-font in font- descriptor structure instead of hard-coding * DT: Add vendor prefix for ShenZhen Asia Better Technology Ltd. (ABT) Core Changes: * Fix build warnings * Update debug logging to new interfaces, plus fixes * Add error messages for ioctls; * Fix kernel docs * doc: Fix kernel docs * fbcon: Remove accelerated scrolling * selftests: Fix build warnings * ttm: Fix missing NULL check in new page pool; Fix build warnings * video: Fix kernel docs Driver Changes: * armada: Fix build warnings * atmel-hlcdc: Fix build warnings * exynos: Fix build warnings * gma500: Remove 2d framebuffer acceleration * lima: Fix build warnings; Cleanups * mediatek: Fix build warnings * meson: Module removal fixes; Fix build warnings * nouveau: Fix build warnings * omap: Fix return values * panel: Fix build warnings; Add support and DT bindings for OnePlus 6/T; Add support and DT bindings for ABT Y030XX067A * panel/s6e63m0: Add/improve SPi reading/writing; Support 3WIRE protocol; Set connector display info; Add more comments * panfrost: Move GPU reset into separate worker, avoid race conditions * pl111: Fix build warnings * qxl: Cleanup fbcon acceleration * rockchip: Fix build warnings * savage: Fix build warnings * sti: Fix build warnings * udl: Fix missing error code in udl_handle_damage() * v3d: Fix build warnings * vc4: Fix build warnings * via: Fix build warnings * virtio: Make dma-buf ops static Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20201118123221.GA19755@linux-uq9g
2020-11-27Merge tag 'exynos-drm-fixes-for-v5.10-rc6' of ↵Dave Airlie
git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes One bug fix . Add COMMON_CLK dependency to fix a build error below, /usr/bin/mips-linux-gnu-ld: drivers/gpu/drm/exynos/exynos_mixer.o: in function `mixer_bind': exynos_mixer.c:(.text+0x958): undefined reference to `clk_set_parent' Signed-off-by: Dave Airlie <airlied@redhat.com> From: Inki Dae <inki.dae@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/1606184478-23384-1-git-send-email-inki.dae@samsung.com
2020-11-26Merge tag 'tegra-for-5.10-arm64-dt-fixes' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/fixes arm64: tegra: Device tree fixes for v5.10-rc6 This contains a couple of fixes to device trees. Among other things, this restores suspend/resume on Jetson TX2 and makes USB OTG work on Jetson TX1. * tag 'tegra-for-5.10-arm64-dt-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: arm64: tegra: Fix Tegra234 VDK node names arm64: tegra: Wrong AON HSP reg property size arm64: tegra: Fix USB_VBUS_EN0 regulator on Jetson TX1 arm64: tegra: Correct the UART for Jetson Xavier NX arm64: tegra: Disable the ACONNECT for Jetson TX2 Link: https://lore.kernel.org/r/20201125170306.1095734-1-thierry.reding@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-11-26Merge tag 'soc-fsl-fix-v5.10' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux into arm/fixes NXP/FSL SoC driver fix for 5.10 DPAA2 DPIO driver - Fix non-static cpumask for irq affinity setting * tag 'soc-fsl-fix-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux: soc: fsl: dpio: Get the cpumask through cpumask_of(cpu) Link: https://lore.kernel.org/r/20201125165922.15487-1-leoyang.li@nxp.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-11-26Merge tag 'zynqmp-soc-fixes-for-v5.10-rc6' of ↵Arnd Bergmann
https://github.com/Xilinx/linux-xlnx into arm/fixes arm64: soc: ZynqMP SoC fixes for v5.10-rc6 - Fix SD dll reset issue by using proper macro - Fix PM feature checking for Xilinx Versal SoC * tag 'zynqmp-soc-fixes-for-v5.10-rc6' of https://github.com/Xilinx/linux-xlnx: (337 commits) firmware: xilinx: Use hash-table for api feature check firmware: xilinx: Fix SD DLL node reset issue Linux 5.10-rc4 kvm: mmu: fix is_tdp_mmu_check when the TDP MMU is not in use afs: Fix afs_write_end() when called with copied == 0 [ver #3] ocfs2: initialize ip_next_orphan panic: don't dump stack twice on warn hugetlbfs: fix anon huge page migration race mm: memcontrol: fix missing wakeup polling thread kernel/watchdog: fix watchdog_allowed_mask not used warning reboot: fix overflow parsing reboot cpu number Revert "kernel/reboot.c: convert simple_strtoul to kstrtoint" compiler.h: fix barrier_data() on clang mm/gup: use unpin_user_pages() in __gup_longterm_locked() mm/slub: fix panic in slab_alloc_node() mailmap: fix entry for Dmitry Baryshkov/Eremin-Solenikov mm/vmscan: fix NR_ISOLATED_FILE corruption on 64-bit mm/compaction: stop isolation if too many pages are isolated and we have pages to migrate mm/compaction: count pages and stop correctly during page isolation drm/nouveau/kms/nv50-: Use atomic encoder callbacks everywhere ... Link: https://lore.kernel.org/r/fd5ab967-f3cf-95fb-7947-5477ff85f97e@monstr.eu Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-11-26Merge tag 'pm-5.10-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fix from Rafael Wysocki: "Fix a recently introduced build issue in the cpufreq SCMI driver (Sudeep Holla)" * tag 'pm-5.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: scmi: Fix build for !CONFIG_COMMON_CLK
2020-11-26gfs2: Upgrade shared glocks for atime updatesAndreas Gruenbacher
Commit 20f829999c38 ("gfs2: Rework read and page fault locking") lifted the glock lock taking from the low-level ->readpage and ->readahead address space operations to the higher-level ->read_iter file and ->fault vm operations. The glocks are still taken in LM_ST_SHARED mode only. On filesystems mounted without the noatime option, ->read_iter sometimes needs to update the atime as well, though. Right now, this leads to a failed locking mode assertion in gfs2_dirty_inode. Fix that by introducing a new update_time inode operation. There, if the glock is held non-exclusively, upgrade it to an exclusive lock. Reported-by: Alexander Aring <aahringo@redhat.com> Fixes: 20f829999c38 ("gfs2: Rework read and page fault locking") Cc: stable@vger.kernel.org # v5.8+ Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2020-11-26drm/tegra: sor: Disable clocks on error in tegra_sor_init()Qinglang Miao
Fix the missing clk_disable_unprepare() before return from tegra_sor_init() in the error handling case. Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-11-26mm: memcg: relayout structure mem_cgroup to avoid cache interferenceFeng Tang
0day reported one -22.7% regression for will-it-scale page_fault2 case [1] on a 4 sockets 144 CPU platform, and bisected to it to be caused by Waiman's optimization (commit bd0b230fe1) of saving one 'struct page_counter' space for 'struct mem_cgroup'. Initially we thought it was due to the cache alignment change introduced by the patch, but further debug shows that it is due to some hot data members ('vmstats_local', 'vmstats_percpu', 'vmstats') sit in 2 adjacent cacheline (2N and 2N+1 cacheline), and when adjacent cache line prefetch is enabled, it triggers an "extended level" of cache false sharing for 2 adjacent cache lines. So exchange the 2 member blocks, while keeping mostly the original cache alignment, which can restore and even enhance the performance, and save 64 bytes of space for 'struct mem_cgroup' (from 2880 to 2816, with 0day's default RHEL-8.3 kernel config) [1]. https://lore.kernel.org/lkml/20201102091543.GM31092@shao2-debian/ Fixes: bd0b230fe145 ("mm/memcg: unify swap and memsw page counters") Reported-by: kernel test robot <rong.a.chen@intel.com> Signed-off-by: Feng Tang <feng.tang@intel.com> Acked-by: Waiman Long <longman@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-11-26drm/nouveau: make sure ret is initialized in nouveau_ttm_io_mem_reserveChristian König
This wasn't initialized for pre NV50 hardware. Signed-off-by: Christian König <christian.koenig@amd.com> Reported-and-Tested-by: Mark Hounschell <markh@compro.net> Reviewed-by: Karol Herbst <kherbst@redhat.com> Link: https://patchwork.freedesktop.org/series/84298/
2020-11-26io_uring: fix files grab/cancel racePavel Begunkov
When one task is in io_uring_cancel_files() and another is doing io_prep_async_work() a race may happen. That's because after accounting a request inflight in first call to io_grab_identity() it still may fail and go to io_identity_cow(), which migh briefly keep dangling work.identity and not only. Grab files last, so io_prep_async_work() won't fail if it did get into ->inflight_list. note: the bug shouldn't exist after making io_uring_cancel_files() not poking into other tasks' requests. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-11-26RDMA/hns: Bugfix for memory window mtpt configurationYixian Liu
When a memory window is bound to a memory region, the local write access should be set for its mtpt table. Fixes: c7c28191408b ("RDMA/hns: Add MW support for hip08") Link: https://lore.kernel.org/r/1606386372-21094-1-git-send-email-liweihang@huawei.com Signed-off-by: Yixian Liu <liuyixian@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-11-26RDMA/hns: Fix retry_cnt and rnr_cnt when querying QPWenpeng Liang
The maximum number of retransmission should be returned when querying QP, not the value of retransmission counter. Fixes: 99fcf82521d9 ("RDMA/hns: Fix the wrong value of rnr_retry when querying qp") Fixes: 926a01dc000d ("RDMA/hns: Add QP operations support for hip08 SoC") Link: https://lore.kernel.org/r/1606382977-21431-1-git-send-email-liweihang@huawei.com Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-11-26RDMA/hns: Fix wrong field of SRQ number the device supportsWenpeng Liang
The SRQ capacity is got from the firmware, whose field should be ended at bit 19. Fixes: ba6bb7e97421 ("RDMA/hns: Add interfaces to get pf capabilities from firmware") Link: https://lore.kernel.org/r/1606382812-23636-1-git-send-email-liweihang@huawei.com Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-11-26iommu/vt-d: Don't read VCCAP register unless it existsDavid Woodhouse
My virtual IOMMU implementation is whining that the guest is reading a register that doesn't exist. Only read the VCCAP_REG if the corresponding capability is set in ECAP_REG to indicate that it actually exists. Fixes: 3375303e8287 ("iommu/vt-d: Add custom allocator for IOASID") Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Reviewed-by: Liu Yi L <yi.l.liu@intel.com> Cc: stable@vger.kernel.org # v5.7+ Acked-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/de32b150ffaa752e0cff8571b17dfb1213fbe71c.camel@infradead.org Signed-off-by: Will Deacon <will@kernel.org>
2020-11-26platform/x86: touchscreen_dmi: Add info for the Irbis TW118 tabletHans de Goede
Add touchscreen info for the Irbis TW118 tablet. Reported-and-tested-by: russianneuromancer <russianneuromancer@ya.ru> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20201124110454.114286-1-hdegoede@redhat.com
2020-11-26platform/x86: touchscreen_dmi: Add info for the Predia Basic tabletHans de Goede
Add touchscreen info for the Predia Basic tablet. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20201015194949.50566-1-hdegoede@redhat.com
2020-11-26platform/x86: intel-vbtn: Support for tablet mode on HP Pavilion 13 x360 PCMax Verevkin
The Pavilion 13 x360 PC has a chassis-type which does not indicate it is a convertible, while it is actually a convertible. Add it to the dmi_switches_allow_list. Signed-off-by: Max Verevkin <me@maxverevkin.tk> Link: https://lore.kernel.org/r/20201124131652.11165-1-me@maxverevkin.tk Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2020-11-26platform/x86: toshiba_acpi: Fix the wrong variable assignmentKaixu Xia
The commit 78429e55e4057 ("platform/x86: toshiba_acpi: Clean up variable declaration") cleans up variable declaration in video_proc_write(). Seems it does the variable assignment in the wrong place, this results in dead code and changes the source code logic. Fix it by doing the assignment at the beginning of the funciton. Fixes: 78429e55e4057 ("platform/x86: toshiba_acpi: Clean up variable declaration") Reported-by: Tosk Robot <tencent_os_robot@tencent.com> Signed-off-by: Kaixu Xia <kaixuxia@tencent.com> Link: https://lore.kernel.org/r/1606024177-16481-1-git-send-email-kaixuxia@tencent.com Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2020-11-26platform/x86: acer-wmi: add automatic keyboard background light toggle key ↵Timo Witte
as KEY_LIGHTS_TOGGLE Got a dmesg message on my AMD Renoir based Acer laptop: "acer_wmi: Unknown key number - 0x84" when toggling keyboard background light Signed-off-by: Timo Witte <timo.witte@gmail.com> Reviewed-by: "Lee, Chun-Yi" <jlee@suse.com> Link: https://lore.kernel.org/r/20200804001423.36778-1-timo.witte@gmail.com Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2020-11-26platform/x86: thinkpad_acpi: Whitelist P15 firmware for dual fan controlMatthias Maier
This commit enables dual fan control for the following new Lenovo models: P15, P15v. Signed-off-by: Matthias Maier <tamiko@43-1.org> Link: https://lore.kernel.org/r/20201126000416.2459645-2-tamiko-ibm-acpi-devel@43-1.org Signed-off-by: Hans de Goede <hdegoede@redhat.com>
generated by cgit (git 2.34.1) at 2025-09-22 12:11:45 +0000