summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-05-08xsk: use generic DMA sync shortcut instead of a custom oneAlexander Lobakin
XSk infra's been using its own DMA sync shortcut to try avoiding redundant function calls. Now that there is a generic one, remove the custom implementation and rely on the generic helpers. xsk_buff_dma_sync_for_cpu() doesn't need the second argument anymore, remove it. Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2024-05-08page_pool: check for DMA sync shortcut earlierAlexander Lobakin
We can save a couple more function calls in the Page Pool code if we check for dma_need_sync() earlier, just when we test pp->p.dma_sync. Move both these checks into an inline wrapper and call the PP wrapper over the generic DMA sync function only when both are true. You can't cache the result of dma_need_sync() in &page_pool, as it may change anytime if an SWIOTLB buffer is allocated or mapped. Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2024-05-08Merge tag 'qcom-drivers-for-6.10-2' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers A few more Qualcomm driver updates for v6.10 This fixes a sleep-while-atomic issue in pmic_glink, stemming from the fact that the GLINK callback comes from interrupt context. It fixes the Bluetooth address in the example of qcom,wcnss, and it enables UEFI variables on SC8180X devices (Primus and Flex 5G). * tag 'qcom-drivers-for-6.10-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: firmware: qcom: uefisecapp: Allow on sc8180x Primus and Flex 5G soc: qcom: pmic_glink: Make client-lock non-sleeping dt-bindings: soc: qcom,wcnss: fix bluetooth address example Link: https://lore.kernel.org/r/20240508020900.204413-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-05-08KVM: arm64: Use hVHE in pKVM by default on CPUs with VHE supportWill Deacon
The early command line parsing treats "kvm-arm.mode=protected" as an alias for "id_aa64mmfr1.vh=0", forcing the use of nVHE so that the host kernel runs at EL1 with the pKVM hypervisor at EL2. With the introduction of hVHE support in ad744e8cb346 ("arm64: Allow arm64_sw.hvhe on command line"), the hypervisor can run using the EL2+0 translation regime. This is interesting for unusual CPUs that have VH stuck to 1, but also because it opens the possibility of a hypervisor "userspace" in the distant future which could be used to isolate vCPU contexts in the hypervisor (see Marc's talk from KVM Forum 2022 [1]). Repaint the "kvm-arm.mode=protected" alias to map to "arm64_sw.hvhe=1", which will use hVHE on CPUs that support it and remain with nVHE otherwise. [1] https://www.youtube.com/watch?v=1F_Mf2j9eIo Signed-off-by: Will Deacon <will@kernel.org> Acked-by: Oliver Upton <oliver.upton@linux.dev> Link: https://lore.kernel.org/r/20240501163400.15838-3-will@kernel.org Signed-off-by: Marc Zyngier <maz@kernel.org>
2024-05-08KVM: arm64: Fix hvhe/nvhe early alias parsingWill Deacon
Booting a kernel with "arm64_sw.hvhe=1 kvm-arm.mode=nvhe" on the command-line results in KVM initialising using hVHE, whereas one might expect the latter option to override the former. Fix this by adding "arm64_sw.hvhe=0" to the alias expansion for "kvm-arm.mode=nvhe". Signed-off-by: Will Deacon <will@kernel.org> Acked-by: Oliver Upton <oliver.upton@linux.dev> Link: https://lore.kernel.org/r/20240501163400.15838-2-will@kernel.org Signed-off-by: Marc Zyngier <maz@kernel.org>
2024-05-08ASoC: atmel: tse850-pcm5142: Remove unused of_gpio.hAndy Shevchenko
of_gpio.h is deprecated and subject to remove. The driver doesn't use it, simply remove the unused header. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20240507205659.690270-1-andriy.shevchenko@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-05-08spi: Remove unneded check for orig_nentsAndy Shevchenko
Both dma_unmap_sgtable() and sg_free_table() in spi_unmap_buf_attrs() have checks for orig_nents against 0. No need to duplicate this. All the same applies to other DMA mapping API calls. Also note, there is no other user in the kernel that does this kind of checks. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20240507201028.564630-1-andriy.shevchenko@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-05-08ASoC: xtensa: Use *-y instead of *-objs in MakefileTakashi Iwai
*-objs suffix is reserved rather for (user-space) host programs while usually *-y suffix is used for kernel drivers (although *-objs works for that purpose for now). Let's correct the old usages of *-objs in Makefiles. Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20240507155540.24815-35-tiwai@suse.de Signed-off-by: Mark Brown <broonie@kernel.org>
2024-05-08ASoC: xilinx: Use *-y instead of *-objs in MakefileTakashi Iwai
*-objs suffix is reserved rather for (user-space) host programs while usually *-y suffix is used for kernel drivers (although *-objs works for that purpose for now). Let's correct the old usages of *-objs in Makefiles. Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20240507155540.24815-34-tiwai@suse.de Signed-off-by: Mark Brown <broonie@kernel.org>
2024-05-08ASoC: ux500: Use *-y instead of *-objs in MakefileTakashi Iwai
*-objs suffix is reserved rather for (user-space) host programs while usually *-y suffix is used for kernel drivers (although *-objs works for that purpose for now). Let's correct the old usages of *-objs in Makefiles. Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20240507155540.24815-33-tiwai@suse.de Signed-off-by: Mark Brown <broonie@kernel.org>
2024-05-08ASoC: uniphier: Use *-y instead of *-objs in MakefileTakashi Iwai
*-objs suffix is reserved rather for (user-space) host programs while usually *-y suffix is used for kernel drivers (although *-objs works for that purpose for now). Let's correct the old usages of *-objs in Makefiles. Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20240507155540.24815-32-tiwai@suse.de Signed-off-by: Mark Brown <broonie@kernel.org>
2024-05-08ASoC: ti: Use *-y instead of *-objs in MakefileTakashi Iwai
*-objs suffix is reserved rather for (user-space) host programs while usually *-y suffix is used for kernel drivers (although *-objs works for that purpose for now). Let's correct the old usages of *-objs in Makefiles. Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20240507155540.24815-31-tiwai@suse.de Signed-off-by: Mark Brown <broonie@kernel.org>
2024-05-08ASoC: tegra: Use *-y instead of *-objs in MakefileTakashi Iwai
*-objs suffix is reserved rather for (user-space) host programs while usually *-y suffix is used for kernel drivers (although *-objs works for that purpose for now). Let's correct the old usages of *-objs in Makefiles. Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20240507155540.24815-30-tiwai@suse.de Signed-off-by: Mark Brown <broonie@kernel.org>
2024-05-08ASoC: stm: Use *-y instead of *-objs in MakefileTakashi Iwai
*-objs suffix is reserved rather for (user-space) host programs while usually *-y suffix is used for kernel drivers (although *-objs works for that purpose for now). Let's correct the old usages of *-objs in Makefiles. Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20240507155540.24815-29-tiwai@suse.de Signed-off-by: Mark Brown <broonie@kernel.org>
2024-05-08ASoC: sti: Use *-y instead of *-objs in MakefileTakashi Iwai
*-objs suffix is reserved rather for (user-space) host programs while usually *-y suffix is used for kernel drivers (although *-objs works for that purpose for now). Let's correct the old usages of *-objs in Makefiles. Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20240507155540.24815-28-tiwai@suse.de Signed-off-by: Mark Brown <broonie@kernel.org>
2024-05-08ASoC: sprd: Use *-y instead of *-objs in MakefileTakashi Iwai
*-objs suffix is reserved rather for (user-space) host programs while usually *-y suffix is used for kernel drivers (although *-objs works for that purpose for now). Let's correct the old usages of *-objs in Makefiles. Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20240507155540.24815-27-tiwai@suse.de Signed-off-by: Mark Brown <broonie@kernel.org>
2024-05-08ASoC: spear: Use *-y instead of *-objs in MakefileTakashi Iwai
*-objs suffix is reserved rather for (user-space) host programs while usually *-y suffix is used for kernel drivers (although *-objs works for that purpose for now). Let's correct the old usages of *-objs in Makefiles. Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20240507155540.24815-26-tiwai@suse.de Signed-off-by: Mark Brown <broonie@kernel.org>
2024-05-08ASoC: SOF: Use *-y instead of *-objs in MakefileTakashi Iwai
*-objs suffix is reserved rather for (user-space) host programs while usually *-y suffix is used for kernel drivers (although *-objs works for that purpose for now). Let's correct the old usages of *-objs in Makefiles. Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20240507155540.24815-25-tiwai@suse.de Signed-off-by: Mark Brown <broonie@kernel.org>
2024-05-08ASoC: sh: Use *-y instead of *-objs in MakefileTakashi Iwai
*-objs suffix is reserved rather for (user-space) host programs while usually *-y suffix is used for kernel drivers (although *-objs works for that purpose for now). Let's correct the old usages of *-objs in Makefiles. Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20240507155540.24815-24-tiwai@suse.de Signed-off-by: Mark Brown <broonie@kernel.org>
2024-05-08ASoC: samsung: Use *-y instead of *-objs in MakefileTakashi Iwai
*-objs suffix is reserved rather for (user-space) host programs while usually *-y suffix is used for kernel drivers (although *-objs works for that purpose for now). Let's correct the old usages of *-objs in Makefiles. Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20240507155540.24815-23-tiwai@suse.de Signed-off-by: Mark Brown <broonie@kernel.org>
2024-05-08ASoC: rockchip: Use *-y instead of *-objs in MakefileTakashi Iwai
*-objs suffix is reserved rather for (user-space) host programs while usually *-y suffix is used for kernel drivers (although *-objs works for that purpose for now). Let's correct the old usages of *-objs in Makefiles. Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20240507155540.24815-22-tiwai@suse.de Signed-off-by: Mark Brown <broonie@kernel.org>
2024-05-08ASoC: qcom: Use *-y instead of *-objs in MakefileTakashi Iwai
*-objs suffix is reserved rather for (user-space) host programs while usually *-y suffix is used for kernel drivers (although *-objs works for that purpose for now). Let's correct the old usages of *-objs in Makefiles. Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20240507155540.24815-21-tiwai@suse.de Signed-off-by: Mark Brown <broonie@kernel.org>
2024-05-08ASoC: pxa: Use *-y instead of *-objs in MakefileTakashi Iwai
*-objs suffix is reserved rather for (user-space) host programs while usually *-y suffix is used for kernel drivers (although *-objs works for that purpose for now). Let's correct the old usages of *-objs in Makefiles. Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20240507155540.24815-20-tiwai@suse.de Signed-off-by: Mark Brown <broonie@kernel.org>
2024-05-08ASoC: mxs: Use *-y instead of *-objs in MakefileTakashi Iwai
*-objs suffix is reserved rather for (user-space) host programs while usually *-y suffix is used for kernel drivers (although *-objs works for that purpose for now). Let's correct the old usages of *-objs in Makefiles. Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20240507155540.24815-19-tiwai@suse.de Signed-off-by: Mark Brown <broonie@kernel.org>
2024-05-08ASoC: meson: Use *-y instead of *-objs in MakefileTakashi Iwai
*-objs suffix is reserved rather for (user-space) host programs while usually *-y suffix is used for kernel drivers (although *-objs works for that purpose for now). Let's correct the old usages of *-objs in Makefiles. Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20240507155540.24815-18-tiwai@suse.de Signed-off-by: Mark Brown <broonie@kernel.org>
2024-05-08ASoC: mediatek: Use *-y instead of *-objs in MakefileTakashi Iwai
*-objs suffix is reserved rather for (user-space) host programs while usually *-y suffix is used for kernel drivers (although *-objs works for that purpose for now). Let's correct the old usages of *-objs in Makefiles. Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20240507155540.24815-17-tiwai@suse.de Signed-off-by: Mark Brown <broonie@kernel.org>
2024-05-08ASoC: loongson: Use *-y instead of *-objs in MakefileTakashi Iwai
*-objs suffix is reserved rather for (user-space) host programs while usually *-y suffix is used for kernel drivers (although *-objs works for that purpose for now). Let's correct the old usages of *-objs in Makefiles. Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20240507155540.24815-16-tiwai@suse.de Signed-off-by: Mark Brown <broonie@kernel.org>
2024-05-08ASoC: kirkwood: Use *-y instead of *-objs in MakefileTakashi Iwai
*-objs suffix is reserved rather for (user-space) host programs while usually *-y suffix is used for kernel drivers (although *-objs works for that purpose for now). Let's correct the old usages of *-objs in Makefiles. Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20240507155540.24815-15-tiwai@suse.de Signed-off-by: Mark Brown <broonie@kernel.org>
2024-05-08ASoC: jz4740: Use *-y instead of *-objs in MakefileTakashi Iwai
*-objs suffix is reserved rather for (user-space) host programs while usually *-y suffix is used for kernel drivers (although *-objs works for that purpose for now). Let's correct the old usages of *-objs in Makefiles. Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20240507155540.24815-14-tiwai@suse.de Signed-off-by: Mark Brown <broonie@kernel.org>
2024-05-08ASoC: intel: Use *-y instead of *-objs in MakefileTakashi Iwai
*-objs suffix is reserved rather for (user-space) host programs while usually *-y suffix is used for kernel drivers (although *-objs works for that purpose for now). Let's correct the old usages of *-objs in Makefiles. Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20240507155540.24815-13-tiwai@suse.de Signed-off-by: Mark Brown <broonie@kernel.org>
2024-05-08ASoC: generic: Use *-y instead of *-objs in MakefileTakashi Iwai
*-objs suffix is reserved rather for (user-space) host programs while usually *-y suffix is used for kernel drivers (although *-objs works for that purpose for now). Let's correct the old usages of *-objs in Makefiles. Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20240507155540.24815-12-tiwai@suse.de Signed-off-by: Mark Brown <broonie@kernel.org>
2024-05-08ASoC: fsl: Use *-y instead of *-objs in MakefileTakashi Iwai
*-objs suffix is reserved rather for (user-space) host programs while usually *-y suffix is used for kernel drivers (although *-objs works for that purpose for now). Let's correct the old usages of *-objs in Makefiles. Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20240507155540.24815-11-tiwai@suse.de Signed-off-by: Mark Brown <broonie@kernel.org>
2024-05-08ASoC: cirrus: Use *-y instead of *-objs in MakefileTakashi Iwai
*-objs suffix is reserved rather for (user-space) host programs while usually *-y suffix is used for kernel drivers (although *-objs works for that purpose for now). Let's correct the old usages of *-objs in Makefiles. Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20240507155540.24815-10-tiwai@suse.de Signed-off-by: Mark Brown <broonie@kernel.org>
2024-05-08ASoC: bcm: Use *-y instead of *-objs in MakefileTakashi Iwai
*-objs suffix is reserved rather for (user-space) host programs while usually *-y suffix is used for kernel drivers (although *-objs works for that purpose for now). Let's correct the old usages of *-objs in Makefiles. Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20240507155540.24815-9-tiwai@suse.de Signed-off-by: Mark Brown <broonie@kernel.org>
2024-05-08ASoC: au1x: Use *-y instead of *-objs MakefileTakashi Iwai
*-objs suffix is reserved rather for (user-space) host programs while usually *-y suffix is used for kernel drivers (although *-objs works for that purpose for now). Let's correct the old usages of *-objs in Makefiles. Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20240507155540.24815-8-tiwai@suse.de Signed-off-by: Mark Brown <broonie@kernel.org>
2024-05-08ASoC: atmel: Use *-y instead of *-objs in MakefileTakashi Iwai
*-objs suffix is reserved rather for (user-space) host programs while usually *-y suffix is used for kernel drivers (although *-objs works for that purpose for now). Let's correct the old usages of *-objs in Makefiles. Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20240507155540.24815-7-tiwai@suse.de Signed-off-by: Mark Brown <broonie@kernel.org>
2024-05-08ASoC: apple: Use *-y instead of *-objs in MakefileTakashi Iwai
*-objs suffix is reserved rather for (user-space) host programs while usually *-y suffix is used for kernel drivers (although *-objs works for that purpose for now). Let's correct the old usages of *-objs in Makefiles. Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20240507155540.24815-6-tiwai@suse.de Signed-off-by: Mark Brown <broonie@kernel.org>
2024-05-08ASoC: amd: Use *-y instead of *-objs in MakefileTakashi Iwai
*-objs suffix is reserved rather for (user-space) host programs while usually *-y suffix is used for kernel drivers (although *-objs works for that purpose for now). Let's correct the old usages of *-objs in Makefiles. Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20240507155540.24815-5-tiwai@suse.de Signed-off-by: Mark Brown <broonie@kernel.org>
2024-05-08ASoC: adi: Use *-y instead of *-objs in MakefileTakashi Iwai
Signed-off-by: Takashi Iwai <tiwai@suse.de> *-objs suffix is reserved rather for (user-space) host programs while usually *-y suffix is used for kernel drivers (although *-objs works for that purpose for now). Let's correct the old usages of *-objs in Makefiles. Link: https://lore.kernel.org/r/20240507155540.24815-4-tiwai@suse.de Signed-off-by: Mark Brown <broonie@kernel.org>
2024-05-08ASoC: codecs: Use *-y instead of *-objs in MakefileTakashi Iwai
*-objs suffix is reserved rather for (user-space) host programs while usually *-y suffix is used for kernel drivers (although *-objs works for that purpose for now). Let's correct the old usages of *-objs in Makefiles. Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20240507155540.24815-3-tiwai@suse.de Signed-off-by: Mark Brown <broonie@kernel.org>
2024-05-08ASoC: core: Use *-y instead of *-objs in MakefileTakashi Iwai
*-objs suffix is reserved rather for (user-space) host programs while usually *-y suffix is used for kernel drivers (although *-objs works for that purpose for now). Let's correct the old usages of *-objs in Makefiles. Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20240507155540.24815-2-tiwai@suse.de Signed-off-by: Mark Brown <broonie@kernel.org>
2024-05-07clk: qcom: clk-alpha-pll: fix rate setting for Stromer PLLsGabor Juhos
The clk_alpha_pll_stromer_set_rate() function writes inproper values into the ALPHA_VAL{,_U} registers which results in wrong clock rates when the alpha value is used. The broken behaviour can be seen on IPQ5018 for example, when dynamic scaling sets the CPU frequency to 800000 KHz. In this case the CPU cores are running only at 792031 KHz: # cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq 800000 # cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq 792031 This happens because the function ignores the fact that the alpha value calculated by the alpha_pll_round_rate() function is only 32 bits wide which must be extended to 40 bits if it is used on a hardware which supports 40 bits wide values. Extend the clk_alpha_pll_stromer_set_rate() function to convert the alpha value to 40 bits before wrinting that into the registers in order to ensure that the hardware really uses the requested rate. After the change the CPU frequency is correct: # cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq 800000 # cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq 800000 Cc: stable@vger.kernel.org Fixes: e47a4f55f240 ("clk: qcom: clk-alpha-pll: Add support for Stromer PLLs") Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Gabor Juhos <j4g8y7@gmail.com> Link: https://lore.kernel.org/r/20240328-alpha-pll-fix-stromer-set-rate-v3-1-1b79714c78bc@gmail.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-05-07clk: qcom: apss-ipq-pll: fix PLL rate for IPQ5018Gabor Juhos
According to ipq5018.dtsi, the maximum supported rate by the CPU is 1.008 GHz on the IPQ5018 platform, however the current configuration of the PLL results in 1.2 GHz rate. Change the 'L' value in the PLL configuration to limit the rate to 1.008 GHz. The downstream kernel also uses the same value [1]. Also add a comment to indicate the desired frequency. [1] https://git.codelinaro.org/clo/qsdk/oss/kernel/linux-ipq-5.4/-/blob/NHSS.QSDK.12.4/drivers/clk/qcom/apss-ipq5018.c?ref_type=heads#L151 Fixes: 50492f929486 ("clk: qcom: apss-ipq-pll: add support for IPQ5018") Signed-off-by: Gabor Juhos <j4g8y7@gmail.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20240326-fix-ipq5018-apss-pll-rate-v1-1-82ab31c9da7e@gmail.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-05-07clk: qcom: Fix SM_GPUCC_8650 dependenciesNathan Chancellor
CONFIG_SM_GCC_8650 depends on ARM64 but it is selected by CONFIG_SM_GPUCC_8650, which can be selected on ARM, resulting in a Kconfig warning. WARNING: unmet direct dependencies detected for SM_GCC_8650 Depends on [n]: COMMON_CLK [=y] && COMMON_CLK_QCOM [=y] && (ARM64 || COMPILE_TEST [=n]) Selected by [y]: - SM_GPUCC_8650 [=y] && COMMON_CLK [=y] && COMMON_CLK_QCOM [=y] Add the same dependencies to CONFIG_SM_GPUCC_8650 to resolve the warning. Fixes: 8676fd4f3874 ("clk: qcom: add the SM8650 GPU Clock Controller driver") Signed-off-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20240318-fix-some-qcom-kconfig-deps-v1-2-ea0773e3df5a@kernel.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-05-07clk: qcom: Fix SC_CAMCC_8280XP dependenciesNathan Chancellor
CONFIG_SC_GCC_8280XP depends on ARM64 but it is selected by CONFIG_SC_CAMCC_8280XP, which can be selected on ARM, resulting in a Kconfig warning. WARNING: unmet direct dependencies detected for SC_GCC_8280XP Depends on [n]: COMMON_CLK [=y] && COMMON_CLK_QCOM [=y] && (ARM64 || COMPILE_TEST [=n]) Selected by [y]: - SC_CAMCC_8280XP [=y] && COMMON_CLK [=y] && COMMON_CLK_QCOM [=y] Add the same dependencies to CONFIG_SC_CAMCC_8280XP to resolve the warning. Fixes: ff93872a9c61 ("clk: qcom: camcc-sc8280xp: Add sc8280xp CAMCC") Signed-off-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20240318-fix-some-qcom-kconfig-deps-v1-1-ea0773e3df5a@kernel.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-05-07Merge branch '100GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2024-05-06 (ice) This series contains updates to ice driver only. Paul adds support for additional E830 devices and adjusts naming for existing E830 devices. Marcin commonizes a couple of TC setup calls to reduce duplicated code. Mateusz adds ice_vsi_cfg_params into ice_vsi to consolidate info. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: ice: refactor struct ice_vsi_cfg_params to be inside of struct ice_vsi ice: Deduplicate tc action setup ice: update E830 device ids and comments ice: add additional E830 device ids ==================== Link: https://lore.kernel.org/r/20240506170827.948682-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-07net: usb: sr9700: stop lying about skb->truesizeEric Dumazet
Some usb drivers set small skb->truesize and break core networking stacks. In this patch, I removed one of the skb->truesize override. I also replaced one skb_clone() by an allocation of a fresh and small skb, to get minimally sized skbs, like we did in commit 1e2c61172342 ("net: cdc_ncm: reduce skb truesize in rx path") and 4ce62d5b2f7a ("net: usb: ax88179_178a: stop lying about skb->truesize") Fixes: c9b37458e956 ("USB2NET : SR9700 : One chip USB 1.1 USB2NET SR9700Device Driver Support") Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20240506143939.3673865-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-07net: usb: smsc75xx: stop lying about skb->truesizeEric Dumazet
Some usb drivers try to set small skb->truesize and break core networking stacks. In this patch, I removed one of the skb->truesize override. I also replaced one skb_clone() by an allocation of a fresh and small skb, to get minimally sized skbs, like we did in commit 1e2c61172342 ("net: cdc_ncm: reduce skb truesize in rx path") and 4ce62d5b2f7a ("net: usb: ax88179_178a: stop lying about skb->truesize") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Steve Glendinning <steve.glendinning@shawell.net> Link: https://lore.kernel.org/r/20240506142358.3657918-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-07usb: aqc111: stop lying about skb->truesizeEric Dumazet
Some usb drivers try to set small skb->truesize and break core networking stacks. I replace one skb_clone() by an allocation of a fresh and small skb, to get minimally sized skbs, like we did in commit 1e2c61172342 ("net: cdc_ncm: reduce skb truesize in rx path") and 4ce62d5b2f7a ("net: usb: ax88179_178a: stop lying about skb->truesize") Fixes: 361459cd9642 ("net: usb: aqc111: Implement RX data path") Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20240506135546.3641185-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-07mptcp: only allow set existing scheduler for net.mptcp.schedulerGregory Detal
The current behavior is to accept any strings as inputs, this results in an inconsistent result where an unexisting scheduler can be set: # sysctl -w net.mptcp.scheduler=notdefault net.mptcp.scheduler = notdefault This patch changes this behavior by checking for existing scheduler before accepting the input. Fixes: e3b2870b6d22 ("mptcp: add a new sysctl scheduler") Cc: stable@vger.kernel.org Signed-off-by: Gregory Detal <gregory.detal@gmail.com> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Tested-by: Geliang Tang <geliang@kernel.org> Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://lore.kernel.org/r/20240506-upstream-net-20240506-mptcp-sched-exist-v1-1-2ed1529e521e@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-21 00:00:36 +0000