| Age | Commit message (Collapse) | Author |
|---|
|
The only interesting bit is the HAT switch, and we use a BPF program
to fix it. So ensure this works correctly.
Link: https://lore.kernel.org/r/20240410-bpf_sources-v1-18-a8bf16033ef8@kernel.org
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
More in line with the other test_* files.
No code change
Link: https://lore.kernel.org/r/20240410-bpf_sources-v1-17-a8bf16033ef8@kernel.org
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
We need to slightly change base_device.py for supporting HID-BPF,
so instead of monkey patching, let's just embed it in the kernel tree.
Link: https://lore.kernel.org/r/20240410-bpf_sources-v1-16-a8bf16033ef8@kernel.org
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
This tablets gets a lot of things wrong:
- the secondary button is reported through Secondary Tip Switch
- the third button is reported through Invert
We need to add some out of proximity intermediate state when moving
back and forth with the eraser mode as it can only be triggered by
physically returning the pen, meaning that the tolerated transitions
can never happen.
Link: https://lore.kernel.org/r/20240410-bpf_sources-v1-15-a8bf16033ef8@kernel.org
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
The values are taken from the HID-BPF file.
Basically we are recomputing the array provided there.
Link: https://lore.kernel.org/r/20240410-bpf_sources-v1-14-a8bf16033ef8@kernel.org
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
Those tablets don't need special initialization, but are reporting
the events with the wrong usages:
- tip switch is used when the eraser should be used
- eraser is used instead of the secondary barrel switch
Add tests for those so we don't regress in the future.
Currently we set x/y tilt to 0 to not trigger the bpf program
compensate_coordinates_by_tilt()
Link: https://lore.kernel.org/r/20240410-bpf_sources-v1-13-a8bf16033ef8@kernel.org
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
All the *_WITH*BUTTON states were almost identical except for the
button itself.
I need to add a new device with a third button, and adding a bunch of
states is going to be quite cumbersome.
So convert the `button` parameter of PenState as a boolean, and store
which button is the target as an argument to all functions that need it.
Link: https://lore.kernel.org/r/20240410-bpf_sources-v1-12-a8bf16033ef8@kernel.org
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
few required changes:
- we need to count how many times a udev 'bind' event happens
- we need to tell `udev-hid-bpf` to not automatically attach the
provided HID-BPF objects
- we need to manually attach the ones from the kernel tree, and wait
for the second udev 'bind' event to happen
Link: https://lore.kernel.org/r/20240410-bpf_sources-v1-11-a8bf16033ef8@kernel.org
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
We need to slightly change base_device.py for supporting HID-BPF,
so instead of monkey patching, let's just embed it in the kernel tree.
Link: https://lore.kernel.org/r/20240410-bpf_sources-v1-10-a8bf16033ef8@kernel.org
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
This device is already fixed by "HID: do not assume HAT Switch
logical max < 8", but for people without the fix already, having the
HID-BPF locally can fix the device while they wait for their
distribution to update.
Link: https://lore.kernel.org/r/20240410-bpf_sources-v1-9-a8bf16033ef8@kernel.org
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
This tablets gets a lot of things wrong:
- the secondary button is reported through Secondary Tip Switch
- the third button is reported through Invert
Fortunately, before entering eraser mode, (so Invert = 1),
the tablet always sends an out-of-proximity event.
So we can detect that single event and:
- if there was none but the invert bit was toggled: this is the
third button
- if there was this out-of-proximity event, we are entering
eraser mode, and we will until the next out-of-proximity.
Link: https://lore.kernel.org/r/20240410-bpf_sources-v1-8-a8bf16033ef8@kernel.org
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
When using the XBox Wireless Controller Elite 2 over Bluetooth,
the device exports the paddle on the back of the device as a single
bitfield value of usage "Assign Selection".
The kernel doesn't process those usages properly and report KEY_UNKNOWN
for it.
SDL doesn't know how to interprete that KEY_UNKNOWN and thus ignores the
paddles.
Given that over USB the kernel uses BTN_TRIGGER_HAPPY[5-8], we
can tweak the report descriptor to make the kernel interprete it properly:
- we need an application collection of gamepad (so we have to close the
current Consumer Control one)
- we need to change the usage to be buttons from 0x15 to 0x18
Link: https://lore.kernel.org/r/20240410-bpf_sources-v1-7-a8bf16033ef8@kernel.org
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
This pen is compatible with multiple Wacom tablets, but we only add support
for the Intuos Pro 2 M, as this is the one our user reported the bug
against.
We can not generically add all compatible Wacom tablets as we are
writing the offsets by hand.
The point of this HID-BPF program is to work around a firmware limitation
where the pressure is repeated every other report.
Given that we know this will happen, we can change the first new pressure
information with the mean compared to the previous one. This way we
smooth the incoming pressure without losing information.
Cc: Ping Cheng <pinglinux@gmail.com>
Cc: Jason Gerecke <killertofu@gmail.com>
Cc: Aaron Armstrong Skomra <skomra@gmail.com>
Cc: Joshua Dickens <Joshua@joshua-dickens.com>
Link: https://lore.kernel.org/r/20240410-bpf_sources-v1-6-a8bf16033ef8@kernel.org
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
Allows to export more than 5 buttons on this 12 buttons mouse.
Link: https://lore.kernel.org/r/20240410-bpf_sources-v1-5-a8bf16033ef8@kernel.org
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
Duplicate of commit 0db117359e47 ("HID: add quirk for 03f0:464a HP Elite
Presenter Mouse"), but in a slightly better way.
This time we actually change the application collection, making clearer
for userspace what the second mouse is.
Note that having both hid-quirks fix and this HID-BPF fix is not a
problem at all.
Link: https://lore.kernel.org/r/20240410-bpf_sources-v1-4-a8bf16033ef8@kernel.org
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
Same problem than the Artist 24: the second button on the pen is treated
like an eraser.
But the problem is even worse this time. There is an actual eraser at
the tail of the pen.
The compensation of the coordinates was done by Martin
Signed-off-by: Martin Sivak <mars@montik.net>
Link: https://lore.kernel.org/r/20240410-bpf_sources-v1-3-a8bf16033ef8@kernel.org
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
This commit adds a fix for XPPen Artist 24 where the second button on
the pen is used as an eraser.
It's a "feature" from Microsoft, but it turns out that it's actually
painful for artists. So we ship here a HID-BPF program that turns this
second button into an actual button.
Note that the HID-BPF program is not directly loaded by the kernel itself
but by udev-hid-bpf[0]. But having the sources here allows us to also
integrate tests into tools/testing/selftests/hid to ensure the HID-BPF
program are actually tested.
[0] https://gitlab.freedesktop.org/libevdev/udev-hid-bpf
Link: https://lore.kernel.org/r/20240410-bpf_sources-v1-2-a8bf16033ef8@kernel.org
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
Turns out that the code can handle a greater range, but the data stored
can not. This is problematic on the Raptor Mach 2 joystick which
logical max is 239. The kernel interprets it as `-15` and thus ignores
the Hat Switch handling.
Link: https://gitlab.freedesktop.org/libevdev/udev-hid-bpf/-/issues/17
Link: https://lore.kernel.org/r/20240410-bpf_sources-v1-1-a8bf16033ef8@kernel.org
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
This reverts commit 3f9f231236ce7e48780d8a4f1f8cb9fae2df1e4e.
Using 64bit for 'sync_io' is unnecessary from the gendisk side. This
overflow will not cause any functional impact, except for a UBSAN
warning. Solving this overflow requires introducing additional
calculations and checks which are not necessary. So just keep using
32bit for 'sync_io'.
Signed-off-by: Li Nan <linan122@huawei.com>
Link: https://lore.kernel.org/r/20240507023103.781816-1-linan666@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Discards can access a significant capacity and take longer than the user
expected. A user may change their mind about wanting to run that command
and attempt to kill the process and do something else with their device.
But since the task is uninterruptable, they have to wait for it to
finish, which could be many hours.
Open code blkdev_issue_discard in the BLKDISCARD ioctl handler and check
for a fatal signal at each iteration so the user doesn't have to wait
for their regretted operation to complete naturally.
Heavily based on an earlier patch from Keith Busch.
Reported-by: Conrad Meyer <conradmeyer@meta.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240506042027.2289826-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add a helper to wait for an entire chain of bios to complete.
[hch: split from a larger patch, moved and changed the name now that it
is non-static]
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240506042027.2289826-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Factor out a helper from __blkdev_issue_discard that chews off as much as
possible from a discard range and allocates a bio for it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240506042027.2289826-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This is basically blk_next_bio just with the bio allocation moved
to the caller to allow for more flexible bio handling in the caller.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240506042027.2289826-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Most bio operations get basic sanity checking in submit_bio and anything
more complicated than that is done in the callers. Discards are a bit
different from that in that a lot of checking is done in
__blkdev_issue_discard, and the specific errnos for that are returned
to userspace. Move the checks that require specific errnos to the ioctl
handler instead, and just leave the basic sanity checking in submit_bio
for the other handlers. This introduces two changes in behavior:
1) the logical block size alignment check of the start and len is lost
for non-ioctl callers.
This matches what is done for other operations including reads and
writes. We should probably verify this for all bios, but for now
make discards match the normal flow.
2) for non-ioctl callers all errors are reported on I/O completion now
instead of synchronously. Callers in general mostly ignore or log
errors so this will actually simplify the code once cleaned up
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240506042027.2289826-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We now set a default granularity in the queue limits API, so don't
bother with this extra check.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240506042027.2289826-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Running syzkaller with the newly reintroduced signed integer overflow
sanitizer shows this report:
[ 62.982337] ------------[ cut here ]------------
[ 62.985692] cgroup: Invalid name
[ 62.986211] UBSAN: signed-integer-overflow in ../block/ioctl.c:36:46
[ 62.989370] 9pnet_fd: p9_fd_create_tcp (7343): problem connecting socket to 127.0.0.1
[ 62.992992] 9223372036854775807 + 4095 cannot be represented in type 'long long'
[ 62.997827] 9pnet_fd: p9_fd_create_tcp (7345): problem connecting socket to 127.0.0.1
[ 62.999369] random: crng reseeded on system resumption
[ 63.000634] GUP no longer grows the stack in syz-executor.2 (7353): 20002000-20003000 (20001000)
[ 63.000668] CPU: 0 PID: 7353 Comm: syz-executor.2 Not tainted 6.8.0-rc2-00035-gb3ef86b5a957 #1
[ 63.000677] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[ 63.000682] Call Trace:
[ 63.000686] <TASK>
[ 63.000731] dump_stack_lvl+0x93/0xd0
[ 63.000919] __get_user_pages+0x903/0xd30
[ 63.001030] __gup_longterm_locked+0x153e/0x1ba0
[ 63.001041] ? _raw_read_unlock_irqrestore+0x17/0x50
[ 63.001072] ? try_get_folio+0x29c/0x2d0
[ 63.001083] internal_get_user_pages_fast+0x1119/0x1530
[ 63.001109] iov_iter_extract_pages+0x23b/0x580
[ 63.001206] bio_iov_iter_get_pages+0x4de/0x1220
[ 63.001235] iomap_dio_bio_iter+0x9b6/0x1410
[ 63.001297] __iomap_dio_rw+0xab4/0x1810
[ 63.001316] iomap_dio_rw+0x45/0xa0
[ 63.001328] ext4_file_write_iter+0xdde/0x1390
[ 63.001372] vfs_write+0x599/0xbd0
[ 63.001394] ksys_write+0xc8/0x190
[ 63.001403] do_syscall_64+0xd4/0x1b0
[ 63.001421] ? arch_exit_to_user_mode_prepare+0x3a/0x60
[ 63.001479] entry_SYSCALL_64_after_hwframe+0x6f/0x77
[ 63.001535] RIP: 0033:0x7f7fd3ebf539
[ 63.001551] Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 f1 14 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
[ 63.001562] RSP: 002b:00007f7fd32570c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[ 63.001584] RAX: ffffffffffffffda RBX: 00007f7fd3ff3f80 RCX: 00007f7fd3ebf539
[ 63.001590] RDX: 4db6d1e4f7e43360 RSI: 0000000020000000 RDI: 0000000000000004
[ 63.001595] RBP: 00007f7fd3f1e496 R08: 0000000000000000 R09: 0000000000000000
[ 63.001599] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
[ 63.001604] R13: 0000000000000006 R14: 00007f7fd3ff3f80 R15: 00007ffd415ad2b8
...
[ 63.018142] ---[ end trace ]---
Historically, the signed integer overflow sanitizer did not work in the
kernel due to its interaction with `-fwrapv` but this has since been
changed [1] in the newest version of Clang; It was re-enabled in the
kernel with Commit 557f8c582a9ba8ab ("ubsan: Reintroduce signed overflow
sanitizer").
Let's rework this overflow checking logic to not actually perform an
overflow during the check itself, thus avoiding the UBSAN splat.
[1]: https://github.com/llvm/llvm-project/pull/82432
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240507-b4-sio-block-ioctl-v3-1-ba0c2b32275e@google.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The first 32k of memory is reserved for interrupt vectors, however for
powerpc64 this might not be enough. Fix this by reserving the maximum
size between 32k and the real size of interrupt vectors.
Signed-off-by: GUO Zihua <guozihua@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240113080509.1598290-1-guozihua@huawei.com
|
|
The chips supported by the emc1403 driver support configurable
conversion rates. Add support for it.
Cc: Lars Petter Mostad <lars.petter.mostad@appear.net>
Tested-by: Lars Petter Mostad <lars.petter.mostad@appear.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Various temperature and limit registers support 11 bit accuracy.
Add support for it.
Cc: Lars Petter Mostad <lars.petter.mostad@appear.net>
Tested-by: Lars Petter Mostad <lars.petter.mostad@appear.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Convert driver to register with the hwmon subsystem using
devm_hwmon_device_register_with_info() instead of
devm_hwmon_device_register_with_groups() to simplify the code
and to reduce its size. As side effect, this also fixes a couple
of overflow problems when writing limit and hysteresis registers.
Cc: Lars Petter Mostad <lars.petter.mostad@appear.net>
Tested-by: Lars Petter Mostad <lars.petter.mostad@appear.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Update the node name to be align with binding document.
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240119203911.3143928-4-Frank.Li@nxp.com
|
|
Update dts to match dts binding document.
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240119203911.3143928-3-Frank.Li@nxp.com
|
|
Due to the INTA is shared with the active-low PHY2 interrupt on
P1010RDB-PA board, so configure P1010RDB-PA's INTA with polarity as
active-low, the P1010RDB-PB board is used separately, so configure
P1010RDB-PB's INTA with polarity as active-high. The INTX in
P1010RDB-PB do not work because of the pcie@0 node fixup will be
overwrited by p1010si-post.dtsi file, so we move the pcie@0 node fixup
to p1010rdb-pb.dts and p1010rdb-pb_36b.dts.
Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240119203911.3143928-2-Frank.Li@nxp.com
|
|
Enable Power Management feature on device tree, including MPC8536,
MPC8544, MPC8548, MPC8572, P1010, P1020, P1021, P1022, P2020, P2041,
P3041, T104X, T1024.
Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com>
Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240119203911.3143928-1-Frank.Li@nxp.com
|
|
Newer processors support various MP2 register sets. Therefore, to ensure
compatibility and obtain C2P data, use the amd_get_c2p_val().
Co-developed-by: Patil Rajesh Reddy <patreddy@amd.com>
Signed-off-by: Patil Rajesh Reddy <patreddy@amd.com>
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Resume or suspend each sensor device based on the num_hid_devices.
Therefore, add a check to handle the special case where no sensors are
present.
Fixes: 93ce5e0231d7 ("HID: amd_sfh: Implement SFH1.1 functionality")
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Modify log messages, but only log errors when sensors are missing or a
true failure occurs to avoid misleading "failed" messages.
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Change device type because
a. it is exactly a mouse, with left/right buttons and scroll wheel;
b. it does not have visible marks or crosshairs, thus does not provide
higher accuracy than stylus.
Signed-off-by: David Yang <mmyangfl@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
This commit adds kernel-doc style comments with complete parameter
descriptions for the function smp_startup_cpu().
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240408053109.96360-2-yang.lee@linux.alibaba.com
|
|
Fix some function names in kernel-doc comments.
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240408053109.96360-1-yang.lee@linux.alibaba.com
|
|
Fix the kernel-doc annotation for the 'skip' parameter in the
partial_decompress() function by adding a missing underscore and colon.
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240408083916.123369-1-yang.lee@linux.alibaba.com
|
|
make C=1 currently gives the following warning:
drivers/cpufreq/intel_pstate.c:262: warning: Function parameter or struct member 'epp_cached' not described in 'cpudata'
Add the missing ":" to fix the trivial kernel-doc syntax error.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Commit ab1a517d55b0 ("powerpc/syscall: Rename syscall_64.c into
interrupt.c") missed to update these three lines:
GCOV_PROFILE_syscall_64.o := n
KCOV_INSTRUMENT_syscall_64.o := n
UBSAN_SANITIZE_syscall_64.o := n
To restore the original behavior, we could replace them with:
GCOV_PROFILE_interrupt.o := n
KCOV_INSTRUMENT_interrupt.o := n
UBSAN_SANITIZE_interrupt.o := n
However, nobody has noticed the functional change in the past three
years, so they were unneeded.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240216135517.2002749-1-masahiroy@kernel.org
|
|
Recent additions in BPF like cpu v4 instructions, test_bpf module
exhibits the following failures:
test_bpf: #82 ALU_MOVSX | BPF_B jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times)
test_bpf: #83 ALU_MOVSX | BPF_H jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times)
test_bpf: #84 ALU64_MOVSX | BPF_B jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times)
test_bpf: #85 ALU64_MOVSX | BPF_H jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times)
test_bpf: #86 ALU64_MOVSX | BPF_W jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times)
test_bpf: #165 ALU_SDIV_X: -6 / 2 = -3 jited:1 ret 2147483645 != -3 (0x7ffffffd != 0xfffffffd)FAIL (1 times)
test_bpf: #166 ALU_SDIV_K: -6 / 2 = -3 jited:1 ret 2147483645 != -3 (0x7ffffffd != 0xfffffffd)FAIL (1 times)
test_bpf: #169 ALU_SMOD_X: -7 % 2 = -1 jited:1 ret 1 != -1 (0x1 != 0xffffffff)FAIL (1 times)
test_bpf: #170 ALU_SMOD_K: -7 % 2 = -1 jited:1 ret 1 != -1 (0x1 != 0xffffffff)FAIL (1 times)
test_bpf: #172 ALU64_SMOD_K: -7 % 2 = -1 jited:1 ret 1 != -1 (0x1 != 0xffffffff)FAIL (1 times)
test_bpf: #313 BSWAP 16: 0x0123456789abcdef -> 0xefcd
eBPF filter opcode 00d7 (@2) unsupported
jited:0 301 PASS
test_bpf: #314 BSWAP 32: 0x0123456789abcdef -> 0xefcdab89
eBPF filter opcode 00d7 (@2) unsupported
jited:0 555 PASS
test_bpf: #315 BSWAP 64: 0x0123456789abcdef -> 0x67452301
eBPF filter opcode 00d7 (@2) unsupported
jited:0 268 PASS
test_bpf: #316 BSWAP 64: 0x0123456789abcdef >> 32 -> 0xefcdab89
eBPF filter opcode 00d7 (@2) unsupported
jited:0 269 PASS
test_bpf: #317 BSWAP 16: 0xfedcba9876543210 -> 0x1032
eBPF filter opcode 00d7 (@2) unsupported
jited:0 460 PASS
test_bpf: #318 BSWAP 32: 0xfedcba9876543210 -> 0x10325476
eBPF filter opcode 00d7 (@2) unsupported
jited:0 320 PASS
test_bpf: #319 BSWAP 64: 0xfedcba9876543210 -> 0x98badcfe
eBPF filter opcode 00d7 (@2) unsupported
jited:0 222 PASS
test_bpf: #320 BSWAP 64: 0xfedcba9876543210 >> 32 -> 0x10325476
eBPF filter opcode 00d7 (@2) unsupported
jited:0 273 PASS
test_bpf: #344 BPF_LDX_MEMSX | BPF_B
eBPF filter opcode 0091 (@5) unsupported
jited:0 432 PASS
test_bpf: #345 BPF_LDX_MEMSX | BPF_H
eBPF filter opcode 0089 (@5) unsupported
jited:0 381 PASS
test_bpf: #346 BPF_LDX_MEMSX | BPF_W
eBPF filter opcode 0081 (@5) unsupported
jited:0 505 PASS
test_bpf: #490 JMP32_JA: Unconditional jump: if (true) return 1
eBPF filter opcode 0006 (@1) unsupported
jited:0 261 PASS
test_bpf: Summary: 1040 PASSED, 10 FAILED, [924/1038 JIT'ed]
Fix them by adding missing processing.
Fixes: daabb2b098e0 ("bpf/tests: add tests for cpuv4 instructions")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/91de862dda99d170697eb79ffb478678af7e0b27.1709652689.git.christophe.leroy@csgroup.eu
|
|
This loop is supposed to copy the mac address to cmd->addr but the
i++ increment is missing so it copies everything to cmd->addr[0] and
only the last address is recorded.
Fixes: 22bedad3ce11 ("net: convert multicast list to list_head")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/b788be9a-15f5-4cca-a3fe-79df4c8ce7b2@moroto.mountain
|
|
make C=1 reports:
warning: Function parameter or struct member 'dev' not described in 'ladder_do_selection'
Document 'dev' for this function.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
acpi_parse_memory_affinity()
After removing architectural code the helper function
acpi_numa_memory_affinity_init() is no longer needed. Squash it into
acpi_parse_memory_affinity(). No functional changes intended.
While at it, fixing checkpatch complaints in code moved.
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202403220943.96dde419-oliver.sang@intel.com
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Signed-off-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
After removing architectural code the helper function
acpi_numa_slit_init() is no longer needed. Squash it into
acpi_parse_slit(). No functional changes intended.
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Signed-off-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
With the removal of the Itanium architecture [1] the last architecture
dependent functions:
acpi_numa_slit_init(), acpi_numa_memory_affinity_init()
were removed. Remove its remainings in the header files too and make
them static.
[1] commit cf8e8658100d ("arch: Remove Itanium (IA-64) architecture")
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Signed-off-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
For configurations that have the kconfig option NUMA_KEEP_MEMINFO
disabled, numa_fill_memblks() only returns with NUMA_NO_MEMBLK (-1).
SRAT lookup fails then because an existing SRAT memory range cannot be
found for a CFMWS address range. This causes the addition of a
duplicate numa_memblk with a different node id and a subsequent page
fault and kernel crash during boot.
Fix this by making numa_fill_memblks() always available regardless of
NUMA_KEEP_MEMINFO.
As Dan suggested, the fix is implemented to remove numa_fill_memblks()
from sparsemem.h and alos using __weak for the function.
Note that the issue was initially introduced with [1]. But since
phys_to_target_node() was originally used that returned the valid node
0, an additional numa_memblk was not added. Though, the node id was
wrong too, a message is seen then in the logs:
kernel/numa.c: pr_info_once("Unknown target node for memory at 0x%llx, assuming node 0\n",
[1] commit fd49f99c1809 ("ACPI: NUMA: Add a node and memblk for each
CFMWS not in SRAT")
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/all/66271b0072317_69102944c@dwillia2-xfh.jf.intel.com.notmuch/
Fixes: 8f1004679987 ("ACPI/NUMA: Apply SRAT proximity domain to entire CFMWS window")
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Robert Richter <rrichter@amd.com>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
