| Age | Commit message (Collapse) | Author |
|---|
|
This can be reproduced by running L2 on L1, and disable VPID on L0
if w/o commit "KVM: nVMX: Fix nested VPID vmx exec control", the L2
crash as below:
KVM: entry failed, hardware error 0x7
EAX=00000000 EBX=00000000 ECX=00000000 EDX=000306c3
ESI=00000000 EDI=00000000 EBP=00000000 ESP=00000000
EIP=0000fff0 EFL=00000002 [-------] CPL=0 II=0 A20=1 SMM=0 HLT=0
ES =0000 00000000 0000ffff 00009300
CS =f000 ffff0000 0000ffff 00009b00
SS =0000 00000000 0000ffff 00009300
DS =0000 00000000 0000ffff 00009300
FS =0000 00000000 0000ffff 00009300
GS =0000 00000000 0000ffff 00009300
LDT=0000 00000000 0000ffff 00008200
TR =0000 00000000 0000ffff 00008b00
GDT= 00000000 0000ffff
IDT= 00000000 0000ffff
CR0=60000010 CR2=00000000 CR3=00000000 CR4=00000000
DR0=0000000000000000 DR1=0000000000000000 DR2=0000000000000000 DR3=0000000000000000
DR6=00000000ffff0ff0 DR7=0000000000000400
EFER=0000000000000000
Reference SDM 30.3 INVVPID:
Protected Mode Exceptions
- #UD
- If not in VMX operation.
- If the logical processor does not support VPIDs (IA32_VMX_PROCBASED_CTLS2[37]=0).
- If the logical processor supports VPIDs (IA32_VMX_PROCBASED_CTLS2[37]=1) but does
not support the INVVPID instruction (IA32_VMX_EPT_VPID_CAP[32]=0).
So we should check both VPID enable bit in vmx exec control and INVVPID support bit
in vmx capability MSRs to enable VPID. This patch adds the guarantee to not enable
VPID if either INVVPID or single-context/all-context invalidation is not exposed in
vmx capability MSRs.
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This can be reproduced by running kvm-unit-tests/vmx.flat on L0 w/ vpid disabled.
Test suite: VPID
Unhandled exception 6 #UD at ip 00000000004051a6
error_code=0000 rflags=00010047 cs=00000008
rax=0000000000000000 rcx=0000000000000001 rdx=0000000000000047 rbx=0000000000402f79
rbp=0000000000456240 rsi=0000000000000001 rdi=0000000000000000
r8=000000000000000a r9=00000000000003f8 r10=0000000080010011 r11=0000000000000000
r12=0000000000000003 r13=0000000000000708 r14=0000000000000000 r15=0000000000000000
cr0=0000000080010031 cr2=0000000000000000 cr3=0000000007fff000 cr4=0000000000002020
cr8=0000000000000000
STACK: @4051a6 40523e 400f7f 402059 40028f
We should hide and forbid VPID in L1 if it is disabled on L0. However, nested VPID
enable bit is set unconditionally during setup nested vmx exec controls though VPID
is not exposed through nested VMX capablity. This patch fixes it by don't set nested
VPID enable bit if it is disabled on L0.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: stable@vger.kernel.org
Fixes: 5c614b3583e (KVM: nVMX: nested VPID emulation)
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
After async pf setup successfully, there is a broadcast wakeup w/ special
token 0xffffffff which tells vCPU that it should wake up all processes
waiting for APFs though there is no real process waiting at the moment.
The async page present tracepoint print prematurely and fails to catch the
special token setup. This patch fixes it by moving the async page present
tracepoint after the special token setup.
Before patch:
qemu-system-x86-8499 [006] ...1 5973.473292: kvm_async_pf_ready: token 0x0 gva 0x0
After patch:
qemu-system-x86-8499 [006] ...1 5973.473292: kvm_async_pf_ready: token 0xffffffff gva 0x0
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Quoting from the Intel SDM, volume 3, section 28.3.3.4: Guidelines for
Use of the INVEPT Instruction:
If EPT was in use on a logical processor at one time with EPTP X, it
is recommended that software use the INVEPT instruction with the
"single-context" INVEPT type and with EPTP X in the INVEPT descriptor
before a VM entry on the same logical processor that enables EPT with
EPTP X and either (a) the "virtualize APIC accesses" VM-execution
control was changed from 0 to 1; or (b) the value of the APIC-access
address was changed.
In the nested case, the burden falls on L1, unless L0 enables EPT in
vmcs02 when L1 doesn't enable EPT in vmcs12.
Signed-off-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
|
|
We have specific destructors for pic/ioapic, we'd better use them when
destroying the VM as well.
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
|
|
Mostly used for split irqchip mode. In that case, these two things are
not inited at all, so no need to release.
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
|
|
This was broken in commit cd979883b9ed ("xen/acpi-processor:
fix enabling interrupts on syscore_resume"). do_suspend (from
xen/manage.c) and thus xen_resume_notifier never get called on
the initial-domain at resume (it is if running as guest.)
The rationale for the breaking change was that upload_pm_data()
potentially does blocking work in syscore_resume(). This patch
addresses the original issue by scheduling upload_pm_data() to
execute in workqueue context.
Cc: Stanislaw Gruszka <sgruszka@redhat.com>
Cc: stable@vger.kernel.org
Based-on-patch-by: Konrad Wilk <konrad.wilk@oracle.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Ankur Arora <ankur.a.arora@oracle.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
|
|
On a randconfig build without CONFIG_SCSI_LPFC_DEBUG_FS, I ran into
multiple compile failures:
drivers/scsi/lpfc/lpfc_debugfs.h: In function 'lpfc_debug_dump_wq':
drivers/scsi/lpfc/lpfc_debugfs.h:405:15: error: 'DUMP_FCP' undeclared (first use in this function); did you mean 'DUMP_VAR'?
drivers/scsi/lpfc/lpfc_debugfs.h:405:15: note: each undeclared identifier is reported only once for each function it appears in
drivers/scsi/lpfc/lpfc_debugfs.h:408:22: error: 'DUMP_NVME' undeclared (first use in this function); did you mean 'DUMP_NONE'?
drivers/scsi/lpfc/lpfc_nvmet.c: In function 'lpfc_nvmet_xmt_ls_rsp_cmp':
drivers/scsi/lpfc/lpfc_nvmet.c:109:2: error: implicit declaration of function 'lpfc_nvmeio_data'; did you mean 'lpfc_mem_free'? [-Werror=implicit-function-declaration]
drivers/scsi/lpfc/lpfc_nvmet.c: In function 'lpfc_nvmet_xmt_fcp_op':
drivers/scsi/lpfc/lpfc_nvmet.c:523:10: error: unused variable 'id' [-Werror=unused-variable]
They are all trivial to fix, so I'm doing it in a combined patch here.
Fixes: 1d9d5a9879ad ("scsi: lpfc: refactor debugfs queue dump routines")
Fixes: bd2cdd5e400f ("scsi: lpfc: NVME Initiator: Add debugfs support")
Fixes: 2b65e18202fd ("scsi: lpfc: NVME Target: Add debugfs support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
lpfc cannot establish connection with targets that send PRLI in P2P
configurations.
If lpfc rejects a PRLI that is sent from a target the target will not
resend and will reject the PRLI send from the initiator.
[mkp: applied by hand]
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
In a previous patch a hpsa_scsi_dev_t.volume_offline update line has
been removed, so let us put it back..
Fixes: 85b29008d8 (hpsa: update check for logical volume status)
Signed-off-by: Tomas Henzl <thenzl@redhat.com>
Acked-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Otherwise this can also prevent modesets e.g. for switching VTs, when
multiple monitors with different native resolutions are connected.
The depths must match though, so keep the != test for that.
Also update the DRM_DEBUG output to be slightly more accurate, this
doesn't only affect requests from userspace.
Bugzilla: https://bugs.freedesktop.org/99841
Fixes: 865afb11949e ("drm/fb-helper: reject any changes to the fbdev")
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170323085326.20185-1-michel@daenzer.net
|
|
Pull the code to calculate the cursor control register value into
separate functions. Allows us to pre-compute them in the future.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170317211808.14693-8-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
|
|
Pull the code to calculate the ILK-SNB sprite control register value
into a separate function. Allows us to pre-compute it in the future.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170317211808.14693-7-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
|
|
Pull the code to calculate the IVB-BDW sprite control register value
into a separate function. Allows us to pre-compute it in the future.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170317211808.14693-6-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
|
|
Pull the code to calculate the VLV/CHV sprite control register value
into a separate function. Allows us to pre-compute it in the future.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170317211808.14693-5-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
|
|
Replace hard coded "ACPI0007" with ACPI_PROCESSOR_DEVICE_HID
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Ankur Arora <ankur.a.arora@oracle.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
|
|
On SKL the planes are uniform so the "sprites" can use the
primary plane code perfectly fine. The only difference we
have is the color key handling, but since we never enable that
for the primary plane the same code works just fine.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170317211808.14693-3-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
|
|
Pull the code to calculate the SKL plane control register value into
a separate function. Allows us to pre-compute it in the future.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170317211808.14693-2-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
|
|
They go better together.
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
We are going to need it for future platforms.
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
descriptor"
A GuC context and a HW context are in no way related, so the name "GuC context descriptor"
is very unfortunate, because a new reader of the code gets overwhelmed very quickly with
a lot of things called "context" that refer to different things. We can improve legibility
a lot by simply renaming a few objects in the GuC code.
v2:
- Rebased
- s/ctx_desc_pool/stage_desc_pool
- Move some explanations to the definition of the guc_stage_desc struct (Chris)
v3:
- Calculate gemsize with less intermediate steps (Joonas)
- Use BIT() macro (Joonas)
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
Some recent refactoring patches have left the doorbell creation outside
the GuC client allocation, which does not make a lot of sense (a client
without a doorbell is something useless). Move it back there, and
refactor the init_doorbell_hw consequently.
Thanks to this, we can do some other improvements, like hoisting the
check for GuC submission enabled out of the enable function.
v2: Rebased.
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
Doorbell release flow requires that we wait for GEN8_DRB_VALID bit to go
to zero after updating db_status before we call the GuC to release the
doorbell.
Kudos to Daniele for finding this out.
v2: WARN instead of DRM_ERROR (Joonas)
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
While at it, fix a typo (s/ring_lcra/ring_lrca) and improve the naming of one
firware interface field (s/ring_tail/submit_element_info, since it can contain
more than just the ring tail).
No change in functionality.
v2:
- Remove reference to "unique user" of the GuC (Daniele)
- Keep mention to renaming from "GuC context" to "client" (Daniele)
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
Prepare for an alternate GuC communication interface.
v2: Make a few functions static and name them correctly while we are at it (Oscar), but
leave an intel_guc_send_mmio interface for users that require old-style communication.
v3: Send intel_uc_init_early back to the top (Michal).
Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
When initializing the GuC log struct, there is an object we need to
allocate always, since the GuC needs its address at fw load time.
The rest is only needed during runtime, in the sense that we only
create if we actually enable GuC logging. Make that distinction
explicit by subdividing further the intel_guc_log struct.
v2: Call the new struct "runtime", instead of "extras" (Joonas)
v3: Check indent (Joonas)
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
with GuC submission
It's mandatory and it gets created if and only if GuC submission is enabled, so that should be
the condition for informing the GuC about it.
Also s/guc_addon_create/guc_ads_create and s/guc_addon_destroy/guc_ads_destroy and, while
at it, add an explanation of what things go inside the ADS object.
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
Starting with intel_guc_loader, down to intel_guc_submission
and finally to intel_guc_log.
v2:
- Null execbuf client outside guc_client_free (Daniele)
- Assert if things try to get allocated twice (Daniele/Joonas)
- Null guc->log.buf_addr when destroyed (Daniele)
- Newline between returning success and error labels (Joonas)
- Remove some unnecessary comments (Joonas)
- Keep guc_log_create_extras naming convention (Joonas)
- Helper function guc_log_has_extras (Joonas)
- No need for separate relay_channel create/destroy. It's just another extra.
- No need to nullify guc->log.flush_wq when destroyed (Joonas)
- Hoist the check for has_extras out of guc_log_create_extras (Joonas)
- Try to do i915_guc_log_register/unregister calls (kind of) symmetric (Daniele)
- Make sure initel_guc_fini is not called before init is ever called (Daniele)
v3:
- Remove unnecessary parenthesis (Joonas)
- Check for logs enabled on debugfs registration
- Rebase on top of Tvrtko's "Fix request re-submission after reset"
v4:
- Rebased
- Comment around enabling/disabling interrupts inside GuC logging (Joonas)
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
The GuC descriptor is big in size. If we use a local definition of
guc_desc we have a chance to overflow stack, so avoid it.
Also, Chris abhors scatterlists :)
v2: Rebased, helper function to retrieve the context descriptor,
s/ctx_pool_vma/ctx_pool/
v3: Zero out guc_context_desc before initialization
v4: Do not do arithmetic on void pointers (Daniele)
v5: Nicer than arithmetic on pointers (Chris, Joonas)
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
Started adding proper teardown to guc_client_alloc, ended up removing
quite a few dead ends where errors communicating with the GuC were
silently ignored. There also seemed to be quite a few erronous
teardown actions performed in case of an error (ordering wrong).
v2:
- Increase function symmetry/proximity (Michal/Daniele)
- Fix __reserve_doorbell accounting for high priority (Daniele)
- Call __update_doorbell_desc! (Daniele)
- Isolate __guc_{,de}allocate_doorbell (Michal/Daniele)
v3:
- "Select" a cacheline is a more accurate verb than "reserve" (Daniele).
- We cannot update & create the doorbell without reserving it first, so
move the whole doorbell creation for execbuf_client to the submission
enable (Oscar).i
- Add a fixme for ignoring possible doorbell destroy errors.
v4:
- Remove comment about is_high_priority (Daniele)
- Debug message typo (Daniele)
- Reuse __get_doorbell in more places (Daniele)
- Do not do arithmetic on void pointers (Daniele)
- Add comment to __reset_doorbell (Daniele)
v5:
- gccisms like arithmetic on void pointers are not frowned upon (Oscar)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
|
|
Fix sparse warning:
drivers/gpu/drm/drm_scdc_helper.c:138:6: warning: symbol
'drm_scdc_get_scrambling_status' was not declared. Should it be static?
Fixes: 62c58af32c93 ("drm/edid: detect SCDC support in HF-VSDB")
Cc: Shashank Sharma <shashank.sharma@intel.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1490193218-24806-1-git-send-email-jani.nikula@intel.com
|
|
Ensure that before we overwrite the reservation_object with our
exclusive fence for the pending clflush operation, that we do wait upon
all the fences in the current reservation_object.
Fixes: 57822dc6b9cf ("drm/i915: Perform object clflushing asynchronously")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170323085758.11695-1-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
|
|
Provide debugfs function stubs when EDAC_DEBUG is not enabled so that we
don't fail the build:
drivers/edac/pnd2_edac.c: In function ‘pnd2_init’:
drivers/edac/pnd2_edac.c:1521:2: error: implicit declaration of function ‘setup_pnd2_debug’ [-Werror=implicit-function-declaration]
setup_pnd2_debug();
^
drivers/edac/pnd2_edac.c: In function ‘pnd2_exit’:
drivers/edac/pnd2_edac.c:1529:2: error: implicit declaration of function ‘teardown_pnd2_debug’ [-Werror=implicit-function-declaration]
teardown_pnd2_debug();
^
Signed-off-by: Borislav Petkov <bp@suse.de>
|
|
The debugfs.c functionality relies on DEBUG_FS so select it.
Signed-off-by: Borislav Petkov <bp@suse.de>
|
|
sock_alloc_inode() allocates socket+inode and socket_wq with
GFP_KERNEL, which is not allowed on the writeback path:
Workqueue: ceph-msgr con_work [libceph]
ffff8810871cb018 0000000000000046 0000000000000000 ffff881085d40000
0000000000012b00 ffff881025cad428 ffff8810871cbfd8 0000000000012b00
ffff880102fc1000 ffff881085d40000 ffff8810871cb038 ffff8810871cb148
Call Trace:
[<ffffffff816dd629>] schedule+0x29/0x70
[<ffffffff816e066d>] schedule_timeout+0x1bd/0x200
[<ffffffff81093ffc>] ? ttwu_do_wakeup+0x2c/0x120
[<ffffffff81094266>] ? ttwu_do_activate.constprop.135+0x66/0x70
[<ffffffff816deb5f>] wait_for_completion+0xbf/0x180
[<ffffffff81097cd0>] ? try_to_wake_up+0x390/0x390
[<ffffffff81086335>] flush_work+0x165/0x250
[<ffffffff81082940>] ? worker_detach_from_pool+0xd0/0xd0
[<ffffffffa03b65b1>] xlog_cil_force_lsn+0x81/0x200 [xfs]
[<ffffffff816d6b42>] ? __slab_free+0xee/0x234
[<ffffffffa03b4b1d>] _xfs_log_force_lsn+0x4d/0x2c0 [xfs]
[<ffffffff811adc1e>] ? lookup_page_cgroup_used+0xe/0x30
[<ffffffffa039a723>] ? xfs_reclaim_inode+0xa3/0x330 [xfs]
[<ffffffffa03b4dcf>] xfs_log_force_lsn+0x3f/0xf0 [xfs]
[<ffffffffa039a723>] ? xfs_reclaim_inode+0xa3/0x330 [xfs]
[<ffffffffa03a62c6>] xfs_iunpin_wait+0xc6/0x1a0 [xfs]
[<ffffffff810aa250>] ? wake_atomic_t_function+0x40/0x40
[<ffffffffa039a723>] xfs_reclaim_inode+0xa3/0x330 [xfs]
[<ffffffffa039ac07>] xfs_reclaim_inodes_ag+0x257/0x3d0 [xfs]
[<ffffffffa039bb13>] xfs_reclaim_inodes_nr+0x33/0x40 [xfs]
[<ffffffffa03ab745>] xfs_fs_free_cached_objects+0x15/0x20 [xfs]
[<ffffffff811c0c18>] super_cache_scan+0x178/0x180
[<ffffffff8115912e>] shrink_slab_node+0x14e/0x340
[<ffffffff811afc3b>] ? mem_cgroup_iter+0x16b/0x450
[<ffffffff8115af70>] shrink_slab+0x100/0x140
[<ffffffff8115e425>] do_try_to_free_pages+0x335/0x490
[<ffffffff8115e7f9>] try_to_free_pages+0xb9/0x1f0
[<ffffffff816d56e4>] ? __alloc_pages_direct_compact+0x69/0x1be
[<ffffffff81150cba>] __alloc_pages_nodemask+0x69a/0xb40
[<ffffffff8119743e>] alloc_pages_current+0x9e/0x110
[<ffffffff811a0ac5>] new_slab+0x2c5/0x390
[<ffffffff816d71c4>] __slab_alloc+0x33b/0x459
[<ffffffff815b906d>] ? sock_alloc_inode+0x2d/0xd0
[<ffffffff8164bda1>] ? inet_sendmsg+0x71/0xc0
[<ffffffff815b906d>] ? sock_alloc_inode+0x2d/0xd0
[<ffffffff811a21f2>] kmem_cache_alloc+0x1a2/0x1b0
[<ffffffff815b906d>] sock_alloc_inode+0x2d/0xd0
[<ffffffff811d8566>] alloc_inode+0x26/0xa0
[<ffffffff811da04a>] new_inode_pseudo+0x1a/0x70
[<ffffffff815b933e>] sock_alloc+0x1e/0x80
[<ffffffff815ba855>] __sock_create+0x95/0x220
[<ffffffff815baa04>] sock_create_kern+0x24/0x30
[<ffffffffa04794d9>] con_work+0xef9/0x2050 [libceph]
[<ffffffffa04aa9ec>] ? rbd_img_request_submit+0x4c/0x60 [rbd]
[<ffffffff81084c19>] process_one_work+0x159/0x4f0
[<ffffffff8108561b>] worker_thread+0x11b/0x530
[<ffffffff81085500>] ? create_worker+0x1d0/0x1d0
[<ffffffff8108b6f9>] kthread+0xc9/0xe0
[<ffffffff8108b630>] ? flush_kthread_worker+0x90/0x90
[<ffffffff816e1b98>] ret_from_fork+0x58/0x90
[<ffffffff8108b630>] ? flush_kthread_worker+0x90/0x90
Use memalloc_noio_{save,restore}() to temporarily force GFP_NOIO here.
Cc: stable@vger.kernel.org # 3.10+, needs backporting
Link: http://tracker.ceph.com/issues/19309
Reported-by: Sergey Jerusalimov <wintchester@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
|
|
The set of available structs is not protected by the spinlock, and for
the single read we can use READ_ONCE instead.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170323101944.21627-7-chris@chris-wilson.co.uk
|
|
Since we reuse the same values for each fw_domain, move them onto
uncore.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170323101944.21627-6-chris@chris-wilson.co.uk
|
|
We can relax the requirement upon ourselves that the forcewake is
released immediately and just allow it to occur naturally following our
mmio request.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170323101944.21627-5-chris@chris-wilson.co.uk
|
|
Use find-first-set bitop to quickly scan through the fw_domains mask and
skip iterating over unused domains.
v2: Move the WARN into the caller, to prevent compiler warnings in
normal builds.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170323101944.21627-4-chris@chris-wilson.co.uk
|
|
In the next patch we will begin to sanity check that we do not attempt
to obtain the forcewake on an unsupport domain. However, that is exactly
what we do during reset of the fw_domains - rectify it before it explodes.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170323101944.21627-3-chris@chris-wilson.co.uk
|
|
In the next patch we will begin to sanity check that we do not attempt
to obtain the forcewake on an unsupport domain. However, that is exactly
what we do during our actual initialisation of fw_domains - rectify it
before it explodes.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170323101944.21627-2-chris@chris-wilson.co.uk
|
|
Pass along the drm_i915_private pointer from the caller, rather than
looking it up from each fw_domain during fw_domains_get/_put. This
allows us to then eliminate the backpointer, in exchange for a more
complicated unwrapping procedure in the rare
intel_uncore_fw_release_timer().
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170323101944.21627-1-chris@chris-wilson.co.uk
|
|
Commit e8a9c58fcd9a ("drm/i915: Unify active context tracking between
legacy/execlists/guc") converted the legacy intel_ringbuffer submission
to the same context pinning mechanism as execlists - that is to pin the
context until the subsequent request is retired. Previously it used the
vma retirement of the context object to keep itself pinned until the
next request (after i915_vma_move_to_active()). In the conversion, I
missed that the vma retirement was also responsible for marking the
object as dirty. Mark the context object as dirty when pinning
(equivalent to execlists) which ensures that if the context is swapped
out due to mempressure or suspend/hibernation, when it is loaded back in
it does so with the previous state (and not all zero).
Fixes: e8a9c58fcd9a ("drm/i915: Unify active context tracking between legacy/execlists/guc")
Reported-by: Dennis Gilmore <dennis@ausil.us>
Reported-by: Mathieu Marquer <mathieu.marquer@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99993
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100181
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: <drm-intel-fixes@lists.freedesktop.org> # v4.11-rc1
Link: http://patchwork.freedesktop.org/patch/msgid/20170322205930.12762-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
|
|
Why have both hw_flags and flags, when just one will do?
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170322210350.6208-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
|
|
Words cannot describe the embarrassment at creating a new gfp_t relaim to
only prevent the oomkiller but allow direct|kswapd reclaim, and then not
use it in the shmem_read_mapping_page_gfp().
Fixes: 24f8e00a8a2e ("drm/i915: Prefer to report ENOMEM rather than incur the oom for gfx allocations")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170322223447.7493-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
This patch adds the missing PINGROUP for GPIO70-99.
This fixes a crash that happens in pinctrl-msm, if any
of the GPIO70-99 are accessed.
Fixes: 5303f7827fcd41d ("pinctrl: qcom: ipq4019: set ngpios to correct value")
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
When using GPIO as IRQ source, the GPIO must be configured
in INPUT. Callbacks dedicated for this was missing in
pinctrl-st driver.
This fix the following kernel error when trying to lock a gpio
as IRQ:
[ 7.521095] gpio gpiochip7: (PIO11): gpiochip_lock_as_irq: tried to flag a GPIO set as output for IRQ
[ 7.526018] gpio gpiochip7: (PIO11): unable to lock HW IRQ 6 for IRQ
[ 7.529405] genirq: Failed to request resources for 0-0053 (irq 81) on irqchip GPIO
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Clearing the status bit on irq_unmask will discard any pending interrupt
that did arrive after the irq_ack, i.e. while the IRQ handler function
was executing.
Fixes: f365be092572 ("pinctrl: Add Qualcomm TLMM driver")
Cc: stable@vger.kernel.org
Cc: Stephen Boyd <sboyd@codeaurora.org>
Reported-by: Timur Tabi <timur@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Some pinctrls share memory regions, and devm_ioremap_resource does not
allow to share resources, in opposition to devm_ioremap.
This patch restores back usage of devm_ioremap function, but with proper
error handling and logging.
Fixes: baafaca ("pinctrl: samsung: Fix return value check in samsung_pinctrl_get_soc_data()")
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
