summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-11-23regulator: max77620: add support to configure MPOKVenkat Reddy Talla
Adding support to configure regulator POK mapping bit to control nRST_IO and GPIO1 POK function. In tegra based platform which uses MAX20024 pmic, when some of regulators are configured FPS_NONE(flexible power sequencer) causes PMIC GPIO1 to go low which lead to various other rails turning off, to avoid this MPOK bit of those regulators need to be set to 0 so that PMIC GPIO1 will not go low. Signed-off-by: Venkat Reddy Talla <vreddytalla@nvidia.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-23Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "Six fixes for bugs that were found via fuzzing, and a trivial hw-enablement patch for AMD Family-17h CPU PMUs" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel/uncore: Allow only a single PMU/box within an events group perf/x86/intel: Cure bogus unwind from PEBS entries perf/x86: Restore TASK_SIZE check on frame pointer perf/core: Fix address filter parser perf/x86: Add perf support for AMD family-17h processors perf/x86/uncore: Fix crash by removing bogus event_list[] handling for SNB client uncore IMC perf/core: Do not set cpuctx->cgrp for unscheduled cgroups
2016-11-23x86/mce: Include the PPIN in MCE records when availableTony Luck
Intel Xeons from Ivy Bridge onwards support a processor identification number set in the factory. To the user this is a handy unique number to identify a particular CPU. Intel can decode this to the fab/production run to track errors. On systems that have it, include it in the machine check record. I'm told that this would be helpful for users that run large data centers with multi-socket servers to keep track of which CPUs are seeing errors. Boris: * Add some clarifying comments and spacing. * Mask out [63:2] in the disabled-but-not-locked case * Call the MSR variable "val" for more readability. Signed-off-by: Tony Luck <tony.luck@intel.com> Cc: Ashok Raj <ashok.raj@intel.com> Cc: linux-edac <linux-edac@vger.kernel.org> Cc: x86-ml <x86@kernel.org> Link: http://lkml.kernel.org/r/20161123114855.njguoaygp3qnbkia@pd.tnic Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-11-23regulator: twl6030: Remove unused fields from struct twlreg_infoAxel Lin
The table_len, *table, remap and max_mV fields are not used, so remove them. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-23regulator: twl: Remove unused fields from struct twlreg_infoAxel Lin
The min_mV, max_mV and flags fields are not used, so remove them. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-23rt2800: disable CCK rates on HTStanislaw Gruszka
Sending frames in CCK rates on HT can cause performance problems. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-11-23rt2800: tune *_PROT_CFG parametersStanislaw Gruszka
Use RTS/CTS protection for TXOP on all rates modes as default and disable CCK rates (this cause performance problems). Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-11-23rt2800: use RTS/CTS protection instead of CTS-to-selfStanislaw Gruszka
Change default to RTS/CTS protection. This has a cost of transmitting one more control frame (RTS) however protect us from traffic from hidden node. On station mode will use CTS-to-self if AP will configure that for the network. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-11-23rt2800: correct TX_SW_CFG1 for 5592Stanislaw Gruszka
Those TX_SW_CFG1 values are used in vendor driver. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-11-23rt2800: correct AUTO_RSP_CFGStanislaw Gruszka
Initialize AUTO_RSP_CFG register to similar value as vendor driver does. Do not set BAC_ACK_POLICY based on short preamble setting, those are unrelated. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-11-23rt2800: do not overwrite WPDMA_GLO_CFG_WP_DMA_BURST_SIZEStanislaw Gruszka
We already initlized WPDMA_GLO_CFG_WP_DMA_BURST_SIZE to 3 on rt2800_init_registers() for USB devices. For PCI devices we will use HW default setting, which is 2, so patch does not change behaviour on PCI devices. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-11-23rt2800: OFDM rates are mandatoryStanislaw Gruszka
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-11-23rt2800usb: do not wipe out USB_DMA_CFG settingsStanislaw Gruszka
We should not reset USB_DMA_CFG on rt2800usb_init_registers() as this function is called indirectly from rt2800_enable_radio(). If we do so, we wipe out USB_DMA_CFG settings from rt2800usb_enable_radio(). Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-11-23rt2800: correctly report MCS TX parametersStanislaw Gruszka
We should only set IEEE80211_HT_MCS_TX_RX_DIF when TX and RX MCS sets are not equal, i.e. when number of tx streams is different than number of RX streams. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-11-23leds: leds-cobalt-raq: use builtin_platform_driverGeliang Tang
Use builtin_platform_driver() helper to simplify the code. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-11-23brcmfmac: update beacon IE after bss up and clear when AP stoppedWright Feng
Firmware doesn't update beacon/Probe Response vendor IEs correctly when bss is down, so we move brcmf_config_ap_mgmt_ie after BSS up. And host driver should clear IEs when AP stopped so that the IEs in host side will be synced with in firmware side. Signed-off-by: Wright Feng <wright.feng@cypress.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-11-23rt2x00: Fix incorrect usage of CONFIG_RT2X00_LIB_USBVishal Thanki
In device removal routine, usage of "#ifdef CONFIG_RT2X00_LIB_USB" will not cover the case when it is configured as module. This will omit the entire if-block which does cleanup of URBs and cancellation of pending work. Changing the #ifdef to #if IS_ENABLED() to fix it. Signed-off-by: Vishal Thanki <vishalthanki@gmail.com> Acked-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-11-23s390/pci: use unique UIDs for domain enumerationSebastian Ott
Use UIDs as domain numbers if the UID checking rules apply (in this case the FW guarantees uniqueness of these values). Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-11-23s390: update defconfigHeiko Carstens
Enable the contiguous memory allocator but set the default size to zero. If somebody wants to use the cma allocator the "cma=" kernel parameter has to be used. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-11-23s390: add cma supportHeiko Carstens
In order to make the cma infrastructure usable we need to add a small architecture backend which calls dma_contiguous_reserve. Otherwise we would end up with the cma allocator enabled, but no pool where memory can be allocated from. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-11-23s390/cpumf: simplify psw generationHeiko Carstens
Use the psw_bits macro and simplify the code. The generated code is also better since it doesn't contain any conditional branches anymore. Reviewed-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-11-23s390/thread_info: get rid of THREAD_ORDER defineHeiko Carstens
We have the s390 specific THREAD_ORDER define and the THREAD_SIZE_ORDER define which is also used in common code. Both have exactly the same semantics. Therefore get rid of THREAD_ORDER and always use THREAD_SIZE_ORDER instead. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-11-23s390/uaccess: make setfs macro return voidHeiko Carstens
For an unknown (historic) reason the s390 specific implementation of set_fs returns whatever the __ctl_load would return. The set_fs macro however is supposed to return void. Change the macro to do that. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-11-23wil6210: support NL80211_ATTR_WIPHY_RETRY_SHORTLior David
Add support for setting retry limit for short frames, using NL80211_CMD_SET_WIPHY with the attribute NL80211_ATTR_WIPHY_RETRY_SHORT. Update wiphy->retry_short from the FW default when interface is brought up. Signed-off-by: Lior David <qca_liord@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-11-23wil6210: align to latest auto generated wmi.hLior David
Align to latest version of the auto generated wmi file describing the interface with FW. Signed-off-by: Lior David <qca_liord@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-11-23wil6210: add support for abort scanMaya Erez
Implement cfg80211 abort_scan op to allow the upper layer to abort an ongoing scan request. In addition, notify wil6210 device on scan abort request instead of just ignoring the scan response. Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-11-23wil6210: fix deadlock when using fw_no_recovery optionLior David
When FW crashes with no_fw_recovery option, driver waits for manual recovery with wil->mutex held, this can easily create deadlocks. Fix the problem by moving the wait outside the lock. Signed-off-by: Lior David <qca_liord@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-11-23wil6210: add support for power save enable / disableMaya Erez
New power management wmi commands provide the ability to change the device power save profile (enable / disable power save). Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-11-23wil6210: fix net queue stop/wakeDedy Lansky
Driver calls to netif_tx_stop_all_queues/netif_tx_wake_all_queues are inconsistent. In several cases, driver can get to a situation where net queues are stopped forever and data cannot be sent. The fix is to stop net queues if there is at least one vring which is "full" and to wake net queues if all vrings are not "full". Signed-off-by: Dedy Lansky <qca_dlansky@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-11-23MAINTAINERS: Add link to drm-misc documentationDaniel Vetter
Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Sean Paul <seanpaul@chromium.org> Acked-by: Jani Nikula <jani.nikula@linux.intel.com> Acked-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161123143132.29006-1-daniel.vetter@ffwll.ch
2016-11-23can: bcm: fix support for CAN FD framesOliver Hartkopp
Since commit 6f3b911d5f29b98 ("can: bcm: add support for CAN FD frames") the CAN broadcast manager supports CAN and CAN FD data frames. As these data frames are embedded in struct can[fd]_frames which have a different length the access to the provided array of CAN frames became dependend of op->cfsiz. By using a struct canfd_frame pointer for the array of CAN frames the new offset calculation based on op->cfsiz was accidently applied to CAN FD frame element lengths. This fix makes the pointer to the arrays of the different CAN frame types a void pointer so that the offset calculation in bytes accesses the correct CAN frame elements. Reference: http://marc.info/?l=linux-netdev&m=147980658909653 Reported-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Tested-by: Andrey Konovalov <andreyknvl@google.com> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2016-11-23ath9k: fix NULL pointer dereferenceMiaoqing Pan
relay_open() may return NULL, check the return value to avoid the crash. BUG: unable to handle kernel NULL pointer dereference at 0000000000000040 IP: [<ffffffffa01a95c5>] ath_cmn_process_fft+0xd5/0x700 [ath9k_common] PGD 41cf28067 PUD 41be92067 PMD 0 Oops: 0000 [#1] SMP CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.8.6+ #35 Hardware name: Hewlett-Packard h8-1080t/2A86, BIOS 6.15 07/04/2011 task: ffffffff81e0c4c0 task.stack: ffffffff81e00000 RIP: 0010:[<ffffffffa01a95c5>] [<ffffffffa01a95c5>] ath_cmn_process_fft+0xd5/0x700 [ath9k_common] RSP: 0018:ffff88041f203ca0 EFLAGS: 00010293 RAX: 0000000000000000 RBX: 000000000000059f RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000040 RDI: ffffffff81f0ca98 RBP: ffff88041f203dc8 R08: ffffffffffffffff R09: 00000000000000ff R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: ffffffff81f0ca98 R14: 0000000000000000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88041f200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000040 CR3: 000000041b6ec000 CR4: 00000000000006f0 Stack: 0000000000000363 00000000000003f3 00000000000003f3 00000000000001f9 000000000000049a 0000000001252c04 ffff88041f203e44 ffff880417b4bfd0 0000000000000008 ffff88041785b9c0 0000000000000002 ffff88041613dc60 Call Trace: <IRQ> [<ffffffffa01b6441>] ath9k_tasklet+0x1b1/0x220 [ath9k] [<ffffffff8105d8dd>] tasklet_action+0x4d/0xf0 [<ffffffff8105dde2>] __do_softirq+0x92/0x2a0 Reported-by: Devin Tuchsen <devin.tuchsen@gmail.com> Tested-by: Devin Tuchsen <devin.tuchsen@gmail.com> Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-11-23ath9k: fix ath9k_hw_gpio_get() to return 0 or 1 on successMatthias Schiffer
Commit b2d70d4944c1 ("ath9k: make GPIO API to support both of WMAC and SOC") refactored ath9k_hw_gpio_get() to support both WMAC and SOC GPIOs, changing the return on success from 1 to BIT(gpio). This broke some callers like ath_is_rfkill_set(). This doesn't fix any known bug in mainline at the moment, but should be fixed anyway. Instead of fixing all callers, change ath9k_hw_gpio_get() back to only return 0 or 1. Fixes: b2d70d4944c1 ("ath9k: make GPIO API to support both of WMAC and SOC") Cc: <stable@vger.kernel.org> # v4.7+ Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> [kvalo@qca.qualcomm.com: mention that doesn't fix any known bug] Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-11-23ath10k: add spectral scan support to wmi-tlvMichal Kazior
Command structure and event flow doesn't seem to be any different compared to existing implementation for other firmware branches. This patch effectively adds in-driver support for spectral scanning on QCA61x4 and QCA9377. Tested QCA9377 w/ WLAN.TF.1.0-00267-1. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-11-23ath10k: fix null deref on wmi-tlv when trying spectral scanMichal Kazior
WMI ops wrappers did not properly check for null function pointers for spectral scan. This caused null dereference crash with WMI-TLV based firmware which doesn't implement spectral scan. The crash could be triggered with: ip link set dev wlan0 up echo background > /sys/kernel/debug/ieee80211/phy0/ath10k/spectral_scan_ctl The crash looked like this: [ 168.031989] BUG: unable to handle kernel NULL pointer dereference at (null) [ 168.037406] IP: [< (null)>] (null) [ 168.040395] PGD cdd4067 PUD fa0f067 PMD 0 [ 168.043303] Oops: 0010 [#1] SMP [ 168.045377] Modules linked in: ath10k_pci(O) ath10k_core(O) ath mac80211 cfg80211 [last unloaded: cfg80211] [ 168.051560] CPU: 1 PID: 1380 Comm: bash Tainted: G W O 4.8.0 #78 [ 168.054336] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014 [ 168.059183] task: ffff88000c460c00 task.stack: ffff88000d4bc000 [ 168.061736] RIP: 0010:[<0000000000000000>] [< (null)>] (null) ... [ 168.100620] Call Trace: [ 168.101910] [<ffffffffa03b9566>] ? ath10k_spectral_scan_config+0x96/0x200 [ath10k_core] [ 168.104871] [<ffffffff811386e2>] ? filemap_fault+0xb2/0x4a0 [ 168.106696] [<ffffffffa03b97e6>] write_file_spec_scan_ctl+0x116/0x280 [ath10k_core] [ 168.109618] [<ffffffff812da3a1>] full_proxy_write+0x51/0x80 [ 168.111443] [<ffffffff811957b8>] __vfs_write+0x28/0x120 [ 168.113090] [<ffffffff812f1a2d>] ? security_file_permission+0x3d/0xc0 [ 168.114932] [<ffffffff8109b912>] ? percpu_down_read+0x12/0x60 [ 168.116680] [<ffffffff811965f8>] vfs_write+0xb8/0x1a0 [ 168.118293] [<ffffffff81197966>] SyS_write+0x46/0xa0 [ 168.119912] [<ffffffff818f2972>] entry_SYSCALL_64_fastpath+0x1a/0xa4 [ 168.121737] Code: Bad RIP value. [ 168.123318] RIP [< (null)>] (null) Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-11-23ath10k: remove set/get_tsf ieee80211_opsPedersen, Thomas
Neither of these did the right thing: - get_tsf just returned 0 - set_tsf assumed a simple offset was applied against get_tsf(), which works, except in the case of calculating TSF from rx_mactime (actual TSF). Just remove them for now. We can reimplement set_tsf in terms of TSF increment/decrement in the future if get_tsf is ever supported by FW. Signed-off-by: Thomas Pedersen <twp@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-11-23ath10k: implement offset_tsf ieee80211_opPedersen, Thomas
Current set_tsf is implemented in terms of TSF_INCREMENT only. Instead support new WMI command TSF_DECREMENT and export these through offset_tsf. Advantage is we get more accurate TSF adjustments, and don't calculate wrong offset in case absolute TSF was calculated from rx_mactime (actual TSF). The new WMI command is available in firmware 10.4-3.2.1-00033 for QCA4019 chips. Old drivers on new firmware or vice versa shouldn't be a problem since get/set tsf logic was already broken. Signed-off-by: Thomas Pedersen <twp@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-11-23ath10k: advertize hardware packet loss mechanismRajkumar Manoharan
Indicate hardware (or firmware) supports that CQM packet-loss report will be generated based on station kickout algorithm. As of now mac80211 tracks connection loss by missing msdu counts (50) whereas ath10k firmware tracks them by missing ppdus (+ BAR tries). While firmware is trying to adapt its rate table, mac80211 might send out low_ack event to hostapd. This is causing frequent connect and disconnect iteration under noisy environment or when station is roaming around. Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-11-23perf sched timehist: Add -V/--cpu-visual optionDavid Ahern
The -V option provides a visual aid for sched switches by cpu: $ perf sched timehist -V time cpu 0123456789abc task name b/n time sch delay run time [tid/pid] (msec) (msec) (msec) --------------- ------ ------------- -------------------- --------- --------- --------- ... 2412598.429696 [0009] i <idle> 0.000 0.000 0.000 2412598.429767 [0002] s perf[7219] 0.000 0.000 0.000 2412598.429783 [0009] s perf[7220] 0.000 0.006 0.087 2412598.429794 [0010] i <idle> 0.000 0.000 0.000 2412598.429795 [0009] s migration/9[53] 0.000 0.003 0.011 2412598.430370 [0010] s sleep[7220] 0.011 0.000 0.576 2412598.432584 [0003] i <idle> 0.000 0.000 0.000 ... Committer notes: 'i' marks idle time, 's' are scheduler events. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/20161116060634.28477-8-namhyung@kernel.org [ Add documentation based on above commit message ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-23perf sched timehist: Add call graph optionsDavid Ahern
If callchains were recorded they are appended to the line with a default stack depth of 5: 1.874569 [0011] gcc[31949] 0.014 0.000 1.148 wait_for_completion_killable <- do_fork <- sys_vfork <- stub_vfork <- __vfork 1.874591 [0010] gcc[31951] 0.000 0.000 0.024 __cond_resched <- _cond_resched <- wait_for_completion <- stop_one_cpu <- sched_exec 1.874603 [0010] migration/10[59] 3.350 0.004 0.011 smpboot_thread_fn <- kthread <- ret_from_fork 1.874604 [0011] <idle> 1.148 0.000 0.035 cpu_startup_entry <- start_secondary 1.874723 [0005] <idle> 0.016 0.000 1.383 cpu_startup_entry <- start_secondary 1.874746 [0005] gcc[31949] 0.153 0.078 0.022 do_wait sys_wait4 <- system_call_fastpath <- __GI___waitpid --no-call-graph can be used to not show the callchains. --max-stack is used to control the number of frames shown (default of 5). -x/--excl options can be used to collapse redundant callchains to get more relevant data on screen. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/20161116060634.28477-7-namhyung@kernel.org [ Add documentation based on above commit message ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-23perf sched timehist: Add -w/--wakeups optionDavid Ahern
The -w option is to show wakeup events with timehist. $ perf sched timehist -w time cpu task name b/n time sch delay run time [tid/pid] (msec) (msec) (msec) --------------- ------ -------------------- --------- --------- --------- 2412598.429689 [0002] perf[7219] awakened: perf[7220] 2412598.429696 [0009] <idle> 0.000 0.000 0.000 2412598.429767 [0002] perf[7219] 0.000 0.000 0.000 2412598.429780 [0009] perf[7220] awakened: migration/9[53] ... Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/20161116060634.28477-6-namhyung@kernel.org [ Add documentation based on above commit message ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-23perf sched timehist: Add summary optionsDavid Ahern
The -s/--summary option is to show process runtime statistics. And the -S/--with-summary option is to show the stats with the normal output. $ perf sched timehist -s Runtime summary comm parent sched-in run-time min-run avg-run max-run stddev (count) (msec) (msec) (msec) (msec) % --------------------------------------------------------------------------------------------------------- ksoftirqd/0[3] 2 2 0.011 0.004 0.005 0.006 14.87 rcu_preempt[7] 2 11 0.071 0.002 0.006 0.017 20.23 watchdog/0[11] 2 1 0.002 0.002 0.002 0.002 0.00 watchdog/1[12] 2 1 0.004 0.004 0.004 0.004 0.00 ... Terminated tasks: sleep[7220] 7219 3 0.770 0.087 0.256 0.576 62.28 Idle stats: CPU 0 idle for 2352.006 msec CPU 1 idle for 2764.497 msec CPU 2 idle for 2998.229 msec CPU 3 idle for 2967.800 msec Total number of unique tasks: 52 Total number of context switches: 2532 Total run time (msec): 218.036 Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/20161116060634.28477-5-namhyung@kernel.org [ Add documentation from last commit, so that docs comes with the cset that introduces the feature ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-23perf sched timehist: Introduce timehist commandDavid Ahern
'perf sched timehist' provides an analysis of scheduling events. Example usage: perf sched record -- sleep 1 perf sched timehist By default it shows the individual schedule events, including the wait time (time between sched-out and next sched-in events for the task), the task scheduling delay (time between wakeup and actually running) and run time for the task: time cpu task name wait time sch delay run time [tid/pid] (msec) (msec) (msec) -------------- ------ -------------------- --------- --------- --------- 79371.874569 [0011] gcc[31949] 0.014 0.000 1.148 79371.874591 [0010] gcc[31951] 0.000 0.000 0.024 79371.874603 [0010] migration/10[59] 3.350 0.004 0.011 79371.874604 [0011] <idle> 1.148 0.000 0.035 79371.874723 [0005] <idle> 0.016 0.000 1.383 79371.874746 [0005] gcc[31949] 0.153 0.078 0.022 ... Times are in msec.usec. Committer note: Add above explanation as the 'perf sched timehist' entry for 'man perf-sched'. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/20161116060634.28477-4-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-23perf evsel: Support printing callchains with arrowsNamhyung Kim
The EVSEL__PRINT_CALLCHAIN_ARROW options can be used to print callchains with arrows for readability. It will be used 'sched timehist' command like below: __schedule <- schedule <- schedule_timeout <- rcu_gp_kthread <- kthread <- ret_from_fork __schedule <- schedule <- schedule_timeout <- rcu_gp_kthread <- kthread <- ret_from_fork __schedule <- schedule <- worker_thread <- kthread <- ret_from_fork Suggested-and-Acked-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/20161116060634.28477-3-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-23perf symbols: Print symbol offsets conditionallyNamhyung Kim
The __symbol__fprintf_symname_offs() always shows symbol offsets. So there's no difference between 'perf script -F ip,sym' and 'perf script -F ip,sym,symoff'. I don't think it's a desired behavior.. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/20161116060634.28477-2-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-23perf c2c: Support cascading optionsJiri Olsa
Adding support for cascading options added by Namhyung in: commit 369a2478973a ("tools lib subcmd: Support cascading options") This way the report and record command share options with with c2c command and can save some option duplicates. For now it's the 'v' option. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Joe Mario <jmario@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1479764011-10732-7-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-23perf c2c report: Display total HITMs on defaultJiri Olsa
Currently we display the cacheline list sorted on remote HITMs by default. The problem is that they might not be always counted and 'perf c2c report' displays an empty output. Thus it's more convenient to display and sort the cacheline list based on the total of HITMs and have the best change to see data in the default report run. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Joe Mario <jmario@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1479764011-10732-6-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-23perf c2c report: Add struct c2c_stats::tot_hitm fieldJiri Olsa
Count total number of HITMs in a special field. This will ease up addition of total HITM sorting into c2c report in the following patch. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Joe Mario <jmario@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1479764011-10732-5-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-23perf c2c report: Add -f/--force optionJiri Olsa
Adding -f/--force option to go through ownership validation: $ sudo perf c2c report File perf.data not owned by current user or root (use -f to override) $ $ sudo perf c2c report -f < c2c report output > $ Signed-off-by: Jiri Olsa <jolsa@redhat.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Joe Mario <jmario@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1479764011-10732-4-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-23perf c2c report: Setup browser after opening perf.dataJiri Olsa
Because of the early browser switch we won't get possible error messages, as it will clear the screen right after showing the message, e.g.: Before: $ sudo perf c2c report -d lcl $ After: $ sudo perf c2c report -d lcl File perf.data not owned by current user or root (use -f to override) $ $ ls -la perf.data -rw-------. 1 acme acme 26648 Nov 22 15:11 perf.data $ Signed-off-by: Jiri Olsa <jolsa@redhat.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Joe Mario <jmario@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1479764011-10732-3-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
generated by cgit (git 2.34.1) at 2025-09-29 19:16:27 +0000