summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-06-13drm/i915/bxt: Sanitiy check the PHY lane power down statusImre Deak
We can check the power state of the PHY data and common lanes as reported by the PHY. Do this in case we need to debug problems where the PHY gets stuck in an unexpected state. Note that I only check these when the lanes are expected to be powered on purpose, since it's not clear at what point the PHY power/clock gates things. v2: - Don't report the encoder as disabled when the sanity check fails. (Ville) CC: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1465825477-32671-1-git-send-email-imre.deak@intel.com
2016-06-13drm/i915/bxt: Rename broxton to bxt in PHY/CDCLK function prefixesImre Deak
Rename these remaining function prefixes to better align with the corresponding SKL functions. No functional change. Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
2016-06-13drm/i915/bxt: Set DDI PHY lane latency optimization during modesetImre Deak
So far we configured a static lane latency optimization during driver loading/resuming. The specification changed at one point and now this configuration depends on the lane count, so move the configuration to modeset time accordingly. It's not clear when this lane configuration takes effect. The specification only requires that the programming is done before enabling the port. On CHV OTOH the lanes start to power up already right after enabling the PLL. To be safe preserve the current order and set things up already before enabling the PLL. v2: (Ander) - Simplify the optimization mask calculation. - Use the correct pipe_config always during the calculation instead of the bogus intel_crtc->config. CC: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=95476 Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
2016-06-13drm/i915/bxt: Move DDI PHY enabling/disabling to the power well codeImre Deak
So far we depended on the HW to dynamically power down unused PHYs and so we enabled them manually once during driver loading/resuming. There are indications however that we can achieve better power savings by manual powering toggling. So make the PHY enabling/disabling to happen on-demand whenever we need either the corresponding AUX or port functionality. CHV does this already by enabling the PHY along the corresponding PHY common lane power wells there, do the same on BXT by adding virtual power wells for the same purpose. Also sanity check the common lane power down ack signal from the PHY. Do this only when the PHY is enabled, since it's not clear at what point the HW power/clock gates things. While at it rename broxton_ prefix to bxt_ in related function names to better align with the SKL code. Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
2016-06-13drm/i915: Factor out intel_power_well_get/putImre Deak
These helpers will be needed by the next patch, so factor them out. No functional change. v2: - Move the refcount==0 WARN to the new put helper. (Ville) CC: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
2016-06-13drm/i915/bxt: Wait for PHY1 GRC calibration synchronouslyImre Deak
A follow-up patch moves the PHY enabling to the power well code where enabling/disabling the PHYs will happen independently. Because of this waiting for the GRC calibration in PHY1 asynchronously would need some additional logic. Instead of adding that let's keep things simple for now and wait synchronously. My measurements showed that the calibration takes ~4ms. Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
2016-06-13ARC: [nsimosci] Enable ARC PGU on nSIM OSCI virtual platformsAlexey Brodkin
With required ARC PGU updates that allow it to be used on simulation platforms we may finally utilize ARC PGU in nSIM OSCI virtual platforms with modern Linux kernels. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2016-06-13ARCv2: [vdk] Enable ARC PGU on HS38 VDKAlexey Brodkin
With required ARC PGU updates that allow it to be used on simulation platforms we may finally utilize ARC PGU in HS38 VDK with modern Linux kernels. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2016-06-13drm/arcpgu: Make ARC PGU usable on simulation platformsRuud Derwig
In case of simulation there's no real encoder/transmitter device because in the model's virtual LCD we're rendering whatever appears in frame-buffer memory. Signed-off-by: Ruud Derwig <rderwig@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2016-06-13drm/prime: fix error path deadlock failRob Clark
There were a couple messed up things about this fail path. (1) it would drop object_name_lock twice (2) drm_gem_handle_delete() (in drm_gem_remove_prime_handles()) needs to grab prime_lock Reported-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Rob Clark <robdclark@gmail.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1465500559-17873-1-git-send-email-robdclark@gmail.com
2016-06-13drm/i915: use #defines for qemu subsystem idsGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1465821536-21312-1-git-send-email-kraxel@redhat.com
2016-06-13drm/i915/mocs: || vs | typo in get_mocs_settings()Dan Carpenter
It seems pretty clear that bitwise OR was intended here and not logical OR. Fixes: 6fc29133eafb ('drm/i915/gen9: Add WaDisableSkipCaching') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
2016-06-13drm/i915: Don't unregister fbdev's fb twiceLukas Wunner
Calling drm_framebuffer_unregister_private() in intel_fbdev_destroy() is superfluous because the framebuffer will subsequently be unregistered by drm_framebuffer_free() when unreferenced in drm_framebuffer_remove(). The call is a leftover, when it was introduced by commit 362063619cf6 ("drm: revamp framebuffer cleanup interfaces"), struct intel_framebuffer was still embedded in struct intel_fbdev rather than being a pointer as it is today, and drm_framebuffer_remove() wasn't used yet. As a bonus, the ID of the framebuffer is no longer 0 in the debug log: Before: [ 39.680874] [drm:drm_mode_object_unreference] OBJ ID: 0 (3) [ 39.680878] [drm:drm_mode_object_unreference] OBJ ID: 0 (2) [ 39.680884] [drm:drm_mode_object_unreference] OBJ ID: 0 (1) After: [ 102.504649] [drm:drm_mode_object_unreference] OBJ ID: 45 (3) [ 102.504651] [drm:drm_mode_object_unreference] OBJ ID: 45 (2) [ 102.504654] [drm:drm_mode_object_unreference] OBJ ID: 45 (1) Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/5031860caad67faa0f1be5965331ef048a311a01.1465383212.git.lukas@wunner.de
2016-06-13KVM: s390/mm: Fix CMMA reset during rebootChristian Borntraeger
commit 1e133ab296f ("s390/mm: split arch/s390/mm/pgtable.c") factored out the page table handling code from __gmap_zap and __s390_reset_cmma into ptep_zap_unused and added a simple flag that tells which one of the function (reset or not) is to be made. This also changed the behaviour, as it also zaps unused page table entries on reset. Turns out that this is wrong as s390_reset_cmma uses the page walker, which DOES NOT take the ptl lock. The most simple fix is to not do the zapping part on reset (which uses the walker) Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Fixes: 1e133ab296f ("s390/mm: split arch/s390/mm/pgtable.c") Cc: stable@vger.kernel.org # 4.6+ Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-06-13ipmi: Remove smi_msg from waiting_rcv_msgs list before handle_one_recv_msg()Junichi Nomura
Commit 7ea0ed2b5be8 ("ipmi: Make the message handler easier to use for SMI interfaces") changed handle_new_recv_msgs() to call handle_one_recv_msg() for a smi_msg while the smi_msg is still connected to waiting_rcv_msgs list. That could lead to following list corruption problems: 1) low-level function treats smi_msg as not connected to list handle_one_recv_msg() could end up calling smi_send(), which assumes the msg is not connected to list. For example, the following sequence could corrupt list by doing list_add_tail() for the entry still connected to other list. handle_new_recv_msgs() msg = list_entry(waiting_rcv_msgs) handle_one_recv_msg(msg) handle_ipmb_get_msg_cmd(msg) smi_send(msg) spin_lock(xmit_msgs_lock) list_add_tail(msg) spin_unlock(xmit_msgs_lock) 2) race between multiple handle_new_recv_msgs() instances handle_new_recv_msgs() once releases waiting_rcv_msgs_lock before calling handle_one_recv_msg() then retakes the lock and list_del() it. If others call handle_new_recv_msgs() during the window shown below list_del() will be done twice for the same smi_msg. handle_new_recv_msgs() spin_lock(waiting_rcv_msgs_lock) msg = list_entry(waiting_rcv_msgs) spin_unlock(waiting_rcv_msgs_lock) | | handle_one_recv_msg(msg) | spin_lock(waiting_rcv_msgs_lock) list_del(msg) spin_unlock(waiting_rcv_msgs_lock) Fixes: 7ea0ed2b5be8 ("ipmi: Make the message handler easier to use for SMI interfaces") Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> [Added a comment to describe why this works.] Signed-off-by: Corey Minyard <cminyard@mvista.com> Cc: stable@vger.kernel.org # 3.19 Tested-by: Ye Feng <yefeng.yl@alibaba-inc.com>
2016-06-13drm/i915/gen9: implement WaConextSwitchWithConcurrentTLBInvalidateTim Gore
This patch enables a workaround for a mid thread preemption issue where a hardware timing problem can prevent the context restore from happening, leading to a hang. v2: move to gen9_init_workarounds (Arun) v3: move to start of gen9_init_workarounds (Arun) Signed-off-by: Tim Gore <tim.gore@intel.com> Reviewed-by: Arun Siluvery <arun.siluvery@linux.intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1465816501-25557-1-git-send-email-tim.gore@intel.com
2016-06-13gpio: 104-idi-48: Fix missing spin_lock_init for ack_lockAxel Lin
Fixes: 9ae482104cb9 ("gpio: 104-idi-48: Clear pending interrupt once in IRQ handler") Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-13Merge tag 'kvm-s390-master-4.7-1' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD KVM: s390: fixup and missing stat 1. A fixup for a bug that was introduced in 4.7-rc1 if userspace uses the cpu model ioctls 2. Add the missing kvm stat for pei events
2016-06-13dt-bindings: drm/mediatek: Add Mediatek HDMI dts bindingPhilipp Zabel
Add the device tree binding documentation for Mediatek HDMI, HDMI PHY and HDMI DDC devices. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Rob Herring <robh@kernel.org>
2016-06-13drm/i915: Support for pread/pwrite from/to non shmem backed objectsAnkitprasad Sharma
This patch adds support for extending the pread/pwrite functionality for objects not backed by shmem. The access will be made through gtt interface. This will cover objects backed by stolen memory as well as other non-shmem backed objects. v2: Drop locks around slow_user_access, prefault the pages before access (Chris) v3: Rebased to the latest drm-intel-nightly (Ankit) v4: Moved page base & offset calculations outside the copy loop, corrected data types for size and offset variables, corrected if-else braces format (Tvrtko/kerneldocs) v5: Enabled pread/pwrite for all non-shmem backed objects including without tiling restrictions (Ankit) v6: Using pwrite_fast for non-shmem backed objects as well (Chris) v7: Updated commit message, Renamed i915_gem_gtt_read to i915_gem_gtt_copy, added pwrite slow path for non-shmem backed objects (Chris/Tvrtko) v8: Updated v7 commit message, mutex unlock around pwrite slow path for non-shmem backed objects (Tvrtko) v9: Corrected check during pread_ioctl, to avoid shmem_pread being called for non-shmem backed objects (Tvrtko) v10: Moved the write_domain check to needs_clflush and tiling mode check to pwrite_fast (Chris) v11: Use pwrite_fast fallback for all objects (shmem and non-shmem backed), call fast_user_write regardless of pagefault in previous iteration v12: Use page-by-page copy for slow user access too (Chris) v13: Handled EFAULT, Avoid use of WARN_ON, put_fence only if whole obj pinned (Chris) v14: Corrected datatypes/initializations (Tvrtko) Testcase: igt/gem_stolen, igt/gem_pread, igt/gem_pwrite Signed-off-by: Ankitprasad Sharma <ankitprasad.r.sharma@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1465548783-19712-1-git-send-email-ankitprasad.r.sharma@intel.com
2016-06-13drm/i915: Use insert_page for pwrite_fastAnkitprasad Sharma
In pwrite_fast, map an object page by page if obj_ggtt_pin fails. First, we try a nonblocking pin for the whole object (since that is fastest if reused), then failing that we try to grab one page in the mappable aperture. It also allows us to handle objects larger than the mappable aperture (e.g. if we need to pwrite with vGPU restricting the aperture to a measely 8MiB or something like that). v2: Pin pages before starting pwrite, Combined duplicate loops (Chris) v3: Combined loops based on local patch by Chris (Chris) v4: Added i915 wrapper function for drm_mm_insert_node_in_range (Chris) v5: Renamed wrapper function for drm_mm_insert_node_in_range (Chris) v5: Added wrapper for drm_mm_remove_node() (Chris) v6: Added get_pages call before pinning the pages (Tvrtko) Added remove_mappable_node() wrapper for drm_mm_remove_node() (Chris) v7: Added size argument for insert_mappable_node (Tvrtko) v8: Do not put_pages after pwrite, do memset of node in the wrapper function (insert_mappable_node) (Chris) v9: Rebase (Ankit) Signed-off-by: Ankitprasad Sharma <ankitprasad.r.sharma@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
2016-06-13drm/i915: Introduce i915_gem_object_get_dma_address()Chris Wilson
This utility function is a companion to i915_gem_object_get_page() that uses the same cached iterator for the scatterlist to perform fast sequential lookup of the dma address associated with any page within the object. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Ankitprasad Sharma <ankitprasad.r.sharma@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
2016-06-13drm/i915: Add support for mapping an object page by pageChris Wilson
Introduced a new vm specfic callback insert_page() to program a single pte in ggtt or ppgtt. This allows us to map a single page in to the mappable aperture space. This can be iterated over to access the whole object by using space as meagre as page size. v2: Added low level rpm assertions to insert_page routines (Chris) v3: Added POSTING_READ post register write (Tvrtko) v4: Rebase (Ankit) v5: Removed wmb() and FLUSH_CTL from insert_page, caller to take care of it (Chris) v6: insert_page not working correctly without FLSH_CNTL write, added the write again. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Ankitprasad Sharma <ankitprasad.r.sharma@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
2016-06-13drm/i915/guc: suppress GuC-related message on non-GuC platformsDave Gordon
If the user doesn't override the default values of the GuC-related kernel parameters, then on a non-GuC-based platform we shouldn't mention that we haven't loaded the GuC firmware. The various messages have been reordered into a least->most severe cascade (none/INFO/INFO/ERROR) for ease of comprehension. Signed-off-by: Dave Gordon <david.s.gordon@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1465575685-34169-1-git-send-email-david.s.gordon@intel.com
2016-06-13iommu/arm-smmu: Wire up map_sg for arm-smmu-v3Jean-Philippe Brucker
The map_sg callback is missing from arm_smmu_ops, but is required by iommu.h. Similarly to most other IOMMU drivers, connect it to default_iommu_map_sg. Cc: <stable@vger.kernel.org> Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2016-06-13regulator: qcom_smd: add list_voltage callbackSrinivas Kandagatla
This patch adds support to list_voltage callback, so that consumers like mmc core, can get information of supported voltage range. Without this patch there is no way for mmc core to know this voltage range. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-13drm/dsi: Add uevent callbackThierry Reding
Implement a uevent callback for devices on the MIPI DSI bus. This callback will append MODALIAS information to the uevent and allow modules to be loaded when devices are added to the bus. Reviewed-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-06-13ARM: OMAP: DRA7: powerdomain data: Remove unused pwrsts_mem_retNishanth Menon
As per the latest revision F of public TRM for DRA7/AM57xx SoCs SPRUHZ6F[1] (April 2016), with the exception of MPU power domain, all other power domains do not have memories capable of retention since they all operate in either "ON" or "OFF" mode. For these power states, the retention state for memories are basically ignored by PRCM and does not require to be programmed. [1] http://www.ti.com/lit/pdf/spruhz6 Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-06-13ARM: OMAP: DRA7: powerdomain data: Remove unused pwrsts_logic_retNishanth Menon
As per the latest revision F of public TRM for DRA7/AM57xx SoCs SPRUHZ6F[1] (April 2016), with the exception of MPU power domain (and CPUx sub power domains), all other power domains can either operate in "ON" mode OR in some cases, "OFF" mode. For these power states, the logic retention state is basically ignored by PRCM and does not require to be programmed. [1] http://www.ti.com/lit/pdf/spruhz6 Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-06-13ARM: OMAP: DRA7: powerdomain data: Set L3init and L4per to ONNishanth Menon
As per the latest revision F of public TRM for DRA7/AM57xx SoCs SPRUHZ6F[1] (April 2016), L4Per and L3init power domains now operate in always "ON" mode due to asymmetric aging limitations. Update the same [1] http://www.ti.com/lit/pdf/spruhz6 Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-06-13drm: fb: cma: fix memory leakSudip Mukherjee
We may have a situation that the memory allocation for fbdefio fails and then the allocation for fbops may succeed as some memory has been freed somewhere. Lets free fbops also to face these rare situtation. Since kfree can handle arguments as NULL, there should not be any problem in calling both the kfree(). Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Fixes: 199c77179c87 ("drm/fb-cma-helper: Add fb_deferred_io support") Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1465743836-6228-1-git-send-email-sudipm.mukherjee@gmail.com
2016-06-12autofs racesAl Viro
* make autofs4_expire_indirect() skip the dentries being in process of expiry * do *not* mess with list_move(); making sure that dentry with AUTOFS_INF_EXPIRING are not picked for expiry is enough. * do not remove NO_RCU when we set EXPIRING, don't bother with smp_mb() there. Clear it at the same time we clear EXPIRING. Makes a bunch of tests simpler. * rename NO_RCU to WANT_EXPIRE, which is what it really is. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-06-12Linux 4.7-rc3v4.7-rc3Linus Torvalds
2016-06-12Merge branch 'for-rc' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux Pull thermal management fixes from Zhang Rui: - fix an ordering issue in cpu cooling that cooling device is registered before it's ready (freq_table being populated). (Lukasz Luba) - fix a missing comment update (Caesar Wang) * 'for-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: thermal: add the note for set_trip_temp thermal: cpu_cooling: fix improper order during initialization
2016-06-12Merge branch 'overlayfs-af_unix-fix' into overlayfs-linusMiklos Szeredi
2016-06-11Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block layer fixes from Jens Axboe: "A small collection of fixes for the current series. This contains: - Two fixes for xen-blkfront, from Bob Liu. - A bug fix for NVMe, releasing only the specific resources we requested. - Fix for a debugfs flags entry for nbd, from Josef. - Plug fix from Omar, fixing up a case of code being switched between two functions. - A missing bio_put() for the new discard callers of submit_bio_wait(), fixing a regression causing a leak of the bio. From Shaun. - Improve dirty limit calculation precision in the writeback code, fixing a case where setting a limit lower than 1% of memory would end up being zero. From Tejun" * 'for-linus' of git://git.kernel.dk/linux-block: NVMe: Only release requested regions xen-blkfront: fix resume issues after a migration xen-blkfront: don't call talk_to_blkback when already connected to blkback nbd: pass the nbd pointer for flags debugfs block: missing bio_put following submit_bio_wait blk-mq: really fix plug list flushing for nomerge queues writeback: use higher precision calculation in domain_dirty_limits()
2016-06-11Merge tag 'gpio-v4.7-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO fixes from Linus Walleij: "A new bunch of GPIO fixes for v4.7. This time I am very grateful that Ricardo Ribalda Delgado went in and fixed my stupid refcounting mistakes in the removal path for GPIO chips. I had a feeling something was wrong here and so it was. It exploded on OMAP and it fixes their problem. Now it should be (more) solid. The rest i compilation, Kconfig and driver fixes. Some tagged for stable. Summary: - Fix a NULL pointer dereference when we are searching the GPIO device list but one of the devices have been removed (struct gpio_chip pointer is NULL). - Fix unaligned reference counters: we were ending on +3 after all said and done. It should be 0. Remove an extraneous get_device(), and call cdev_del() followed by device_del() in gpiochip_remove() instead and the count goes to zero and calls the release() function properly. - Fix a compile warning due to a missing #include in the OF/device tree portions. - Select ANON_INODES for GPIOLIB, we're using that for our character device. Some randconfig tests disclosed the problem. - Make sure the Zynq driver clock runs also without CONFIG_PM enabled - Fix an off-by-one error in the 104-DIO-48E driver - Fix warnings in bcm_kona_gpio_reset()" * tag 'gpio-v4.7-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: bcm-kona: fix bcm_kona_gpio_reset() warnings gpio: select ANON_INODES gpio: include <linux/io-mapping.h> in gpiolib-of gpiolib: Fix unaligned used of reference counters gpiolib: Fix NULL pointer deference gpio: zynq: initialize clock even without CONFIG_PM gpio: 104-dio-48e: Fix control port offset computation off-by-one error
2016-06-11Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Two current fixes: - one affects Qemu CD ROM emulation, which stopped working after the updates in SCSI to require VPD pages from all conformant devices. Fix temporarily by blacklisting Qemu (we can relax later when they come into compliance). - The other is a fix to the optimal transfer size. We set up a minefield for ourselves by being confused about whether the limits are in bytes or sectors (SCSI optimal is in blocks and the queue parameter is in bytes). This tries to fix the problem (wrong setting for queue limits max_sectors) and make the problem more obvious by introducing a wrapper function" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: sd: Fix rw_max for devices that report an optimal xfer size scsi: Add QEMU CD-ROM to VPD Inquiry Blacklist
2016-06-11Merge branch 'i2c/for-current' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: - a bigger fix for i801 to finally be able to be loaded on some machines again - smaller driver fixes - documentation update because of a renamed file * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: mux: reg: Provide of_match_table i2c: mux: refer to i2c-mux.txt i2c: octeon: Avoid printk after too long SMBUS message i2c: octeon: Missing AAK flag in case of I2C_M_RECV_LEN i2c: i801: Allow ACPI SystemIO OpRegion to conflict with PCI BAR
2016-06-11Merge tag 'devicetree-fixes-for-4.7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull DeviceTree fixes from Rob Herring: - fix unflatten_dt_nodes when dad parameter is set. - add vendor prefixes for TechNexion and UniWest - documentation fix for Marvell BT - OF IRQ kerneldoc fixes - restrict CMA alignment adjustments to non dma-coherent - a couple of warning fixes in reserved-memory code - DT maintainers updates * tag 'devicetree-fixes-for-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: drivers: of: add definition of early_init_dt_alloc_reserved_memory_arch drivers/of: Fix depth for sub-tree blob in unflatten_dt_nodes() drivers: of: Fix of_pci.h header guard dt-bindings: Add vendor prefix for TechNexion of: add vendor prefix for UniWest dt: bindings: fix documentation for MARVELL's bt-sd8xxx wireless device of: add missing const for of_parse_phandle_with_args() in !CONFIG_OF of: silence warnings due to max() usage drivers: of: of_reserved_mem: fixup the CMA alignment not to affect dma-coherent of: irq: fix of_irq_get[_byname]() kernel-doc MAINTAINERS: DeviceTree maintainer updates
2016-06-11Merge tag '20160610_uvc_compat_for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/luto/linux Pull uvc compat XU ioctl fixes from Andy Lutomirski: "uvc's compat XU ioctls go through tons of potentially buggy indirection. The first patch removes the indirection. The second one cleans up the code. Compile-tested only. I have the hardware, but I have absolutely no idea what XU does, how to use it, what software to recompile as 32-bit, or what to test in that software" * tag '20160610_uvc_compat_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/luto/linux: uvc_v4l2: Simplify compat ioctl implementation uvc: Forward compat ioctls to their handlers directly
2016-06-10Merge tag 'phy-for-4.7-rc' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-linus Kishon writes: phy: for 4.7-rc *) Fix compiler warning in exynos-mipi-video *) Fix in ti-pipe3 PHY to program the DPLL even if it was already locked Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2016-06-10mei: don't use wake_up_interruptible for wr_ctrlAlexander Usyskin
wr_ctrl waiters are none interruptible, so should be waken up with call to wake_up and not to wake_up_interruptible. This fixes commit: 7ff4bdd ("mei: fix waiting for wr_ctrl for corner cases.") Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-11Merge tag 'drm-amdkfd-fixes-2016-06-03' of ↵Dave Airlie
git://people.freedesktop.org/~gabbayo/linux into drm-fixes * tag 'drm-amdkfd-fixes-2016-06-03' of git://people.freedesktop.org/~gabbayo/linux: drm/amdkfd: print once about mem_banks truncation drm/amdkfd: destroy dbgmgr in notifier release drm/amdkfd: unbind only existing processes
2016-06-10uvc_v4l2: Simplify compat ioctl implementationAndy Lutomirski
The uvc compat ioctl implementation seems to have copied user data for no good reason. Remove a bunch of copies. Signed-off-by: Andy Lutomirski <luto@kernel.org>
2016-06-10uvc: Forward compat ioctls to their handlers directlyAndy Lutomirski
The current code goes through a lot of indirection just to call a known handler. Simplify it: just call the handlers directly. Cc: stable@vger.kernel.org Signed-off-by: Andy Lutomirski <luto@kernel.org>
2016-06-10Merge branch 'for-linus-4.7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs Pull btrfs fixes from Chris Mason: "Has some fixes and some new self tests for btrfs. The self tests are usually disabled in the .config file (unless you're doing btrfs dev work), and this bunch is meant to find problems with the 64K page size patches. Jeff has a patch to help people see if they are using the hardware assist crc32c module, which really helps us nail down problems when people ask why crcs are using so much CPU. Otherwise, it's small fixes" * 'for-linus-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: Btrfs: self-tests: Fix extent buffer bitmap test fail on BE system Btrfs: self-tests: Fix test_bitmaps fail on 64k sectorsize Btrfs: self-tests: Use macros instead of constants and add missing newline Btrfs: self-tests: Support testing all possible sectorsizes and nodesizes Btrfs: self-tests: Execute page straddling test only when nodesize < PAGE_SIZE btrfs: advertise which crc32c implementation is being used at module load Btrfs: add validadtion checks for chunk loading Btrfs: add more validation checks for superblock Btrfs: clear uptodate flags of pages in sys_array eb Btrfs: self-tests: Support non-4k page size Btrfs: Fix integer overflow when calculating bytes_per_bitmap Btrfs: test_check_exists: Fix infinite loop when searching for free space entries Btrfs: end transaction if we abort when creating uuid root btrfs: Use __u64 in exported linux/btrfs.h.
2016-06-10Merge tag 'powerpc-4.7-3Michael Ellerman:' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from - ptrace: Fix out of bounds array access warning from Khem Raj - pseries: Fix PCI config address for DDW from Gavin Shan - pseries: Fix IBM_ARCH_VEC_NRCORES_OFFSET since POWER8NVL was added from Michael Ellerman - of: fix autoloading due to broken modalias with no 'compatible' from Wolfram Sang - radix: Fix always false comparison against MMU_NO_CONTEXT from Aneesh Kumar K.V - hash: Compute the segment size correctly for ISA 3.0 from Aneesh Kumar K.V - nohash: Fix build break with 64K pages from Michael Ellerman * tag 'powerpc-4.7-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/nohash: Fix build break with 64K pages powerpc/mm/hash: Compute the segment size correctly for ISA 3.0 powerpc/mm/radix: Fix always false comparison against MMU_NO_CONTEXT of: fix autoloading due to broken modalias with no 'compatible' powerpc/pseries: Fix IBM_ARCH_VEC_NRCORES_OFFSET since POWER8NVL was added powerpc/pseries: Fix PCI config address for DDW powerpc/ptrace: Fix out of bounds array access warning
2016-06-10Merge tag 'hwmon-for-linus-v4.7-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: - fix regression in fam15h_power driver - minor variable type fix in lm90 driver - document compatible statement for ina2xx driver * tag 'hwmon-for-linus-v4.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (lm90) use proper type for update_interval hwmon: (ina2xx) Document compatible for INA231 hwmon: (fam15h_power) Disable preemption when reading registers
2016-06-10Merge branch 'stacking-fixes' (vfs stacking fixes from Jann)Linus Torvalds
Merge filesystem stacking fixes from Jann Horn. * emailed patches from Jann Horn <jannh@google.com>: sched: panic on corrupted stack end ecryptfs: forbid opening files without mmap handler proc: prevent stacking filesystems on top
generated by cgit (git 2.34.1) at 2025-09-13 02:23:22 +0000