| Age | Commit message (Collapse) | Author |
|---|
|
Starting with Rust 1.88.0 (released 2025-06-26), `rustdoc` complains
about a target modifier mismatch in configurations where `-Zfixed-x18`
is passed:
error: mixing `-Zfixed-x18` will cause an ABI mismatch in crate `rust_out`
|
= help: the `-Zfixed-x18` flag modifies the ABI so Rust crates compiled with different values of this flag cannot be used together safely
= note: unset `-Zfixed-x18` in this crate is incompatible with `-Zfixed-x18=` in dependency `core`
= help: set `-Zfixed-x18=` in this crate or unset `-Zfixed-x18` in `core`
= help: if you are sure this will not cause problems, you may use `-Cunsafe-allow-abi-mismatch=fixed-x18` to silence this error
The reason is that `rustdoc` was not passing the target modifiers when
configuring the session options, and thus it would report a mismatch
that did not exist as soon as a target modifier is used in a dependency.
We did not notice it in the kernel until now because `-Zfixed-x18` has
been a target modifier only since 1.88.0 (and it is the only one we use
so far).
The issue has been reported upstream [1] and a fix has been submitted
[2], including a test similar to the kernel case.
[ This is now fixed upstream (thanks Guillaume for the quick review),
so it will be fixed in Rust 1.90.0 (expected 2025-09-18).
- Miguel ]
Meanwhile, conditionally pass `-Cunsafe-allow-abi-mismatch=fixed-x18`
to workaround the issue on our side.
Cc: stable@vger.kernel.org # Needed in 6.12.y and later (Rust is pinned in older LTSs).
Reported-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Closes: https://lore.kernel.org/rust-for-linux/36cdc798-524f-4910-8b77-d7b9fac08d77@oss.qualcomm.com/
Link: https://github.com/rust-lang/rust/issues/144521 [1]
Link: https://github.com/rust-lang/rust/pull/144523 [2]
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20250727092317.2930617-1-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
It turns out that the ECDT table inside the ThinkBook 14 G7 IML
contains a valid EC description but an invalid ID string
("_SB.PC00.LPCB.EC0"). Ignoring this ECDT based on the invalid
ID string prevents the kernel from detecting the built-in touchpad,
so relax the sanity check of the ID string and only reject ECDTs
with empty ID strings.
Reported-by: Ilya K <me@0upti.me>
Fixes: 7a0d59f6a913 ("ACPI: EC: Ignore ECDT tables with an invalid ID string")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Tested-by: Ilya K <me@0upti.me>
Link: https://patch.msgid.link/20250729062038.303734-1-W_Armin@gmx.de
Cc: 6.16+ <stable@vger.kernel.org> # 6.16+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Clamp writes to power limits powerX_crit/currX_crit, powerX_cap,
powerX_max, to the maximum supported by the pcode mailbox
when sysfs-provided values exceed this limit.
Although the pcode already performs clamping, values beyond the pcode
mailbox's supported range get truncated, leading to incorrect
critical power settings.
This patch ensures proper clamping to prevent such truncation.
v2:
- Address below review comments. (Riana)
- Split comments into multiple sentences.
- Use local variables for readability.
- Add a debug log.
- Use u64 instead of unsigned long.
v3:
- Change drm_dbg logs to drm_info. (Badal)
v4:
- Rephrase the drm_info log. (Rodrigo, Riana)
- Rename variable max_mbx_power_limit to max_supp_power_limit, as
limit is same for platforms with and without mailbox power limit
support.
Signed-off-by: Karthik Poosa <karthik.poosa@intel.com>
Fixes: 92d44a422d0d ("drm/xe/hwmon: Expose card reactive critical power")
Fixes: fb1b70607f73 ("drm/xe/hwmon: Expose power attributes")
Reviewed-by: Riana Tauro <riana.tauro@intel.com>
Link: https://lore.kernel.org/r/20250808185310.3466529-1-karthik.poosa@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit d301eb950da59f962bafe874cf5eb6d61a85b2c2)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
When the xe buffer-object shrinker allows GPU waits and write-back,
(typically from kswapd), perform multiple passes, skipping
subsequent passes if the shrinker number of scanned objects target
is reached.
1) Without GPU waits and write-back
2) Without write-back
3) With both GPU-waits and write-back
This is to avoid stalls and costly write- and readbacks unless they
are really necessary.
v2:
- Don't test for scan completion twice. (Stuart Summers)
- Update tags.
Reported-by: melvyn <melvyn2@dnsense.pub>
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/5557
Cc: Summers Stuart <stuart.summers@intel.com>
Fixes: 00c8efc3180f ("drm/xe: Add a shrinker for xe bos")
Cc: <stable@vger.kernel.org> # v6.15+
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Link: https://lore.kernel.org/r/20250805074842.11359-1-thomas.hellstrom@linux.intel.com
(cherry picked from commit 80944d334182ce5eb27d00e2bf20a88bfc32dea1)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
If we hit the error path, the previous fence (if there is one) has
already been put() prior to this, so doing a fence_wait could lead to
UAF. Tweak the flow to do to the put() until after we do the wait.
Fixes: 270172f64b11 ("drm/xe: Update xe_ttm_access_memory to use GPU for non-visible access")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Maciej Patelczyk <maciej.patelczyk@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Link: https://lore.kernel.org/r/20250731093807.207572-8-matthew.auld@intel.com
(cherry picked from commit 9b7ca35ed28fe5fad86e9d9c24ebd1271e4c9c3e)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
With non-page aligned copy, we need to use 4 byte aligned pitch, however
the size itself might still be close to our maximum of ~8M, and so the
dimensions of the copy can easily exceed the S16_MAX limit of the copy
command leading to the following assert:
xe 0000:03:00.0: [drm] Assertion `size / pitch <= ((s16)(((u16)~0U) >> 1))` failed!
platform: BATTLEMAGE subplatform: 1
graphics: Xe2_HPG 20.01 step A0
media: Xe2_HPM 13.01 step A1
tile: 0 VRAM 10.0 GiB
GT: 0 type 1
WARNING: CPU: 23 PID: 10605 at drivers/gpu/drm/xe/xe_migrate.c:673 emit_copy+0x4b5/0x4e0 [xe]
To fix this account for the pitch when calculating the number of current
bytes to copy.
Fixes: 270172f64b11 ("drm/xe: Update xe_ttm_access_memory to use GPU for non-visible access")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Maciej Patelczyk <maciej.patelczyk@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Link: https://lore.kernel.org/r/20250731093807.207572-7-matthew.auld@intel.com
(cherry picked from commit 8c2d61e0e916e077fda7e7b8e67f25ffe0f361fc)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
If the buf + offset is not aligned to XE_CAHELINE_BYTES we fallback to
using a bounce buffer. However the bounce buffer here is allocated on
the stack, and the only alignment requirement here is that it's
naturally aligned to u8, and not XE_CACHELINE_BYTES. If the bounce
buffer is also misaligned we then recurse back into the function again,
however the new bounce buffer might also not be aligned, and might never
be until we eventually blow through the stack, as we keep recursing.
Instead of using the stack use kmalloc, which should respect the
power-of-two alignment request here. Fixes a kernel panic when
triggering this path through eudebug.
v2 (Stuart):
- Add build bug check for power-of-two restriction
- s/EINVAL/ENOMEM/
Fixes: 270172f64b11 ("drm/xe: Update xe_ttm_access_memory to use GPU for non-visible access")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Maciej Patelczyk <maciej.patelczyk@intel.com>
Cc: Stuart Summers <stuart.summers@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Link: https://lore.kernel.org/r/20250731093807.207572-6-matthew.auld@intel.com
(cherry picked from commit 38b34e928a08ba594c4bbf7118aa3aadacd62fff)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- fix bug in qgroups reporting incorrect usage for higher level qgroups
- in zoned mode, do not select metadata group as finish target
- convert xarray lock to RCU when trying to release extent buffer to
avoid a deadlock
- do not allow relocation on partially dropped subvolumes, which is
normally not possible but has been reported on old filesystems
- in tree-log, report errors on missing block group when unaccounting
log tree extent buffers
- with large folios, fix range length when processing ordered extents
* tag 'for-6.17-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix iteration bug in __qgroup_excl_accounting()
btrfs: zoned: do not select metadata BG as finish target
btrfs: do not allow relocation of partially dropped subvolumes
btrfs: error on missing block group when unaccounting log tree extent buffers
btrfs: fix wrong length parameter for btrfs_cleanup_ordered_extents()
btrfs: make btrfs_cleanup_ordered_extents() support large folios
btrfs: fix subpage deadlock in try_release_subpage_extent_buffer()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
- Add a mitigation for a cache coherency vulnerability when running an
SNP guest which makes sure all cache lines belonging to a 4K page are
evicted after latter has been converted to a guest-private page
[ SNP: Secure Nested Paging - not to be confused with Single Nucleotide
Polymorphism, which is the more common use of that TLA. I am on a
mission to write out the more obscure TLAs in order to keep track of
them.
Because while math tells us that there are only about 17k different
combinations of three-letter acronyms using English letters (26^3), I
am convinced that somehow Intel, AMD and ARM have together figured out
new mathematics, and have at least a million different TLAs that they
use. - Linus ]
* tag 'snp_cache_coherency' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sev: Evict cache lines during SNP memory validation
|
|
The gpio-mlxbf3 driver interfaces with two GPIO controllers,
device instance 0 and 1. There is a single IRQ resource shared
between the two controllers, and it is found in the ACPI table for
device instance 0. The driver should not use platform_get_irq(),
otherwise this error is logged when probing instance 1:
mlxbf3_gpio MLNXBF33:01: error -ENXIO: IRQ index 0 not found
Cc: stable@vger.kernel.org
Fixes: cd33f216d241 ("gpio: mlxbf3: Add gpio driver support")
Signed-off-by: David Thompson <davthompson@nvidia.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/ce70b98a201ce82b9df9aa80ac7a5eeaa2268e52.1754928650.git.davthompson@nvidia.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
This reverts commit 10af0273a35ab4513ca1546644b8c853044da134.
While this change was merged, it is not the preferred solution.
During review of a similar change to the gpio-mlxbf2 driver, the
use of "platform_get_irq_optional" was identified as the preferred
solution, so let's use it for gpio-mlxbf3 driver as well.
Cc: stable@vger.kernel.org
Fixes: 10af0273a35a ("gpio: mlxbf3: only get IRQ for device instance 0")
Signed-off-by: David Thompson <davthompson@nvidia.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/8d2b630c71b3742f2c74242cf7d602706a6108e6.1754928650.git.davthompson@nvidia.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Commit d33bd88ac0eb ("ACPI: processor: perflib: Fix initial _PPC limit
application") added a pr->performance check that prevents the frequency
QoS request from being added when the given processor has no performance
object. Unfortunately, this causes a WARN() in freq_qos_remove_request()
to trigger on an attempt to take the given CPU offline later because the
frequency QoS object has not been added for it due to the missing
performance object.
Address this by moving the pr->performance check before calling
acpi_processor_get_platform_limit() so it only prevents a limit from
being set for the CPU if the performance object is not present. This
way, the frequency QoS request is added as it was before the above
commit and it is present all the time along with the CPU's cpufreq
policy regardless of whether or not the CPU is online.
Fixes: d33bd88ac0eb ("ACPI: processor: perflib: Fix initial _PPC limit application")
Tested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: 5.4+ <stable@vger.kernel.org> # 5.4+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/2801421.mvXUDI8C0e@rafael.j.wysocki
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec
Steffen Klassert says:
====================
pull request (net): ipsec 2025-08-11
1) Fix flushing of all states in xfrm_state_fini.
From Sabrina Dubroca.
2) Fix some IPsec software offload features. These
got lost with some recent HW offload changes.
From Sabrina Dubroca.
Please pull or let me know if there are problems.
* tag 'ipsec-2025-08-11' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec:
udp: also consider secpath when evaluating ipsec use for checksumming
xfrm: bring back device check in validate_xmit_xfrm
xfrm: restore GSO for SW crypto
xfrm: flush all states in xfrm_state_fini
====================
Link: https://patch.msgid.link/20250811092008.731573-1-steffen.klassert@secunet.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
'net-prevent-deadlocks-and-mis-configuration-with-per-napi-threaded-config'
Jakub Kicinski says:
====================
net: prevent deadlocks and mis-configuration with per-NAPI threaded config
Running the test added with a recent fix on a driver with persistent
NAPI config leads to a deadlock. The deadlock is fixed by patch 3,
patch 2 is I think a more fundamental problem with the way we
implemented the config.
I hope the fix makes sense, my own thinking is definitely colored
by my preference (IOW how the per-queue config RFC was implemented).
v1: https://lore.kernel.org/20250808014952.724762-1-kuba@kernel.org
====================
Link: https://patch.msgid.link/20250809001205.1147153-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The following order of calls currently deadlocks if:
- device has threaded=1; and
- NAPI has persistent config with threaded=0.
netif_napi_add_weight_config()
dev->threaded == 1
napi_kthread_create()
napi_enable()
napi_restore_config()
napi_set_threaded(0)
napi_stop_kthread()
while (NAPIF_STATE_SCHED)
msleep(20)
We deadlock because disabled NAPI has STATE_SCHED set.
Creating a thread in netif_napi_add() just to destroy it in
napi_disable() is fairly ugly in the first place. Let's read
both the device config and the NAPI config in netif_napi_add().
Fixes: e6d76268813d ("net: Update threaded state in napi config in netif_set_threaded")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20250809001205.1147153-4-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
We have to make sure that all future NAPIs will have the right threaded
state when the state is configured on the device level.
We chose not to have an "unset" state for threaded, and not to wipe
the NAPI config clean when channels are explicitly disabled.
This means the persistent config structs "exist" even when their NAPIs
are not instantiated.
Differently put - the NAPI persistent state lives in the net_device
(ncfg == struct napi_config):
,--- [napi 0] - [napi 1]
[dev] | |
`--- [ncfg 0] - [ncfg 1]
so say we a device with 2 queues but only 1 enabled:
,--- [napi 0]
[dev] |
`--- [ncfg 0] - [ncfg 1]
now we set the device to threaded=1:
,---------- [napi 0 (thr:1)]
[dev(thr:1)] |
`---------- [ncfg 0 (thr:1)] - [ncfg 1 (thr:?)]
Since [ncfg 1] was not attached to a NAPI during configuration we
skipped it. If we create a NAPI for it later it will have the old
setting (presumably disabled). One could argue if this is right
or not "in principle", but it's definitely not how things worked
before per-NAPI config..
Fixes: 2677010e7793 ("Add support to set NAPI threaded for individual NAPI")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20250809001205.1147153-3-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The test is implicitly assuming the device only has 2 queues.
A real device will likely have more. The exact problem is that
because NAPIs get added to the list from the head, the netlink
dump reports them in reverse order. So the naive napis[0] will
actually likely give us the _last_ NAPI, not the first one.
Re-enable all the NAPIs instead of hard-coding 2 in the test.
This way the NAPIs we operated on will always reappear,
doesn't matter where they were in the registration order.
Fixes: e6d76268813d ("net: Update threaded state in napi config in netif_set_threaded")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20250809001205.1147153-2-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In aw8xxxx_profile_info(), strscpy() is called with the length of the
source string "null" rather than the size of the destination buffer.
This is fine as long as the destination buffer is larger than the source
string, but we should still use the destination buffer size instead to
call strscpy() as intended. And since 'name' points to the fixed-size
buffer 'uinfo->value.enumerated.name', we can safely omit the size
argument and let strscpy() infer it using sizeof() and remove 'name'.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://patch.msgid.link/20250810214144.1985-2-thorsten.blum@linux.dev
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
udp_child_ehash_entries -> udp_child_hash_entries
Fixes: 9804985bf27f ("udp: Introduce optional per-netns hash table.")
Signed-off-by: Jordan Rife <jordan@jrife.io>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250808185800.1189042-1-jordan@jrife.io
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Yao Zi says:
====================
Fix broken link with TH1520 GMAC when linkspeed changes
It's noted that on TH1520 SoC, the GMAC's link becomes broken after
the link speed is changed (for example, running ethtool -s eth0 speed
100 on the peer when negotiated to 1Gbps), but the GMAC could function
normally if the speed is brought back to the initial.
Just like many other SoCs utilizing STMMAC IP, we need to adjust the TX
clock supplying TH1520's GMAC through some SoC-specific glue registers
when linkspeed changes. But it's found that after the full kernel
startup, reading from them results in garbage and writing to them makes
no effect, which is the cause of broken link.
Further testing shows perisys-apb4-hclk must be ungated for normal
access to Th1520 GMAC APB glue registers, which is neither described in
dt-binding nor acquired by the driver.
This series expands the dt-binding of TH1520's GMAC to allow an extra
"APB glue registers interface clock", instructs the driver to acquire
and enable the clock, and finally supplies CLK_PERISYS_APB4_HCLK for
TH1520's GMACs in SoC devicetree.
v2: https://lore.kernel.org/netdev/20250801091240.46114-1-ziyao@disroot.org/
v1: https://lore.kernel.org/all/20250729093734.40132-1-ziyao@disroot.org/
====================
Link: https://patch.msgid.link/20250808093655.48074-2-ziyao@disroot.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Describe perisys-apb4-hclk as the APB clock for TH1520 SoC, which is
essential for accessing GMAC glue registers.
Fixes: 7e756671a664 ("riscv: dts: thead: Add TH1520 ethernet nodes")
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Drew Fustini <fustini@kernel.org>
Tested-by: Drew Fustini <fustini@kernel.org>
Link: https://patch.msgid.link/20250808093655.48074-5-ziyao@disroot.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
It's necessary to adjust the MAC TX clock when the linkspeed changes,
but it's noted such adjustment always fails on TH1520 SoC, and reading
back from APB glue registers that control clock generation results in
garbage, causing broken link.
With some testing, it's found a clock must be ungated for access to APB
glue registers. Without any consumer, the clock is automatically
disabled during late kernel startup. Let's get and enable it if it's
described in devicetree.
For backward compatibility with older devicetrees, probing won't fail if
the APB clock isn't found. In this case, we emit a warning since the
link will break if the speed changes.
Fixes: 33a1a01e3afa ("net: stmmac: Add glue layer for T-HEAD TH1520 SoC")
Signed-off-by: Yao Zi <ziyao@disroot.org>
Tested-by: Drew Fustini <fustini@kernel.org>
Reviewed-by: Drew Fustini <fustini@kernel.org>
Link: https://patch.msgid.link/20250808093655.48074-4-ziyao@disroot.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Besides ones for GMAC core and peripheral registers, the TH1520 GMAC
requires one more clock for configuring APB glue registers. Describe
it in the binding.
Fixes: f920ce04c399 ("dt-bindings: net: Add T-HEAD dwmac support")
Signed-off-by: Yao Zi <ziyao@disroot.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Drew Fustini <fustini@kernel.org>
Link: https://patch.msgid.link/20250808093655.48074-3-ziyao@disroot.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Currently, when a Secure TSC enabled SNP guest attempts to write to the
intercepted GUEST_TSC_FREQ MSR (a read-only MSR), the guest kernel response
incorrectly implies a VMM configuration error, when in fact it is the usual
VMM configuration to intercept writes to read-only MSRs, unless explicitly
documented.
Modify the intercepted TSC MSR #VC handling:
* Write to GUEST_TSC_FREQ will generate a #GP instead of terminating the
guest
* Write to MSR_IA32_TSC will generate a #GP instead of silently ignoring it
However, continue to terminate the guest when reading from intercepted
GUEST_TSC_FREQ MSR with Secure TSC enabled, as intercepted reads indicate an
improper VMM configuration for Secure TSC enabled SNP guests.
[ bp: simplify comment. ]
Fixes: 38cc6495cdec ("x86/sev: Prevent GUEST_TSC_FREQ MSR interception for Secure TSC enabled guests")
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Nikunj A Dadhania <nikunj@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/20250722074853.22253-1-nikunj@amd.com
|
|
reset_gpio is claimed in mdiobus_register_device(), but it is not
released in mdiobus_unregister_device(). It is instead only
released when the whole MDIO bus is unregistered.
When a device uses the reset_gpio property, it becomes impossible
to unregister it and register it again, because the GPIO remains
claimed.
This patch resolves that issue.
Fixes: bafbdd527d56 ("phylib: Add device reset GPIO support") # see notes
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Cc: Csókás Bence <csokas.bence@prolan.hu>
[ csokas.bence: Resolve rebase conflict and clarify msg ]
Signed-off-by: Buday Csaba <buday.csaba@prolan.hu>
Link: https://patch.msgid.link/20250807135449.254254-2-csokas.bence@prolan.hu
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
TJA1103/04/20/21 support both C22 and C45 accessing methods.
The TJA11xx driver has implemented the match_phy_device() API.
However, it does not handle the C45 ID. If C45 was used to access
TJA11xx, match_phy_device() would always return false due to
phydev->phy_id only used by C22 being empty, resulting in the
generic phy driver being used for TJA11xx PHYs.
Therefore, check phydev->c45_ids.device_ids[MDIO_MMD_PMAPMD] when
using C45.
Fixes: 1b76b2497aba ("net: phy: nxp-c45-tja11xx: simplify .match_phy_device OP")
Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
Link: https://patch.msgid.link/20250807040832.2455306-1-xiaoning.wang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
We want to get rid of triggering "Frame Change" events from
frontbuffer flush calls. We are about to move using TRANS_PUSH
register for this on LunarLake and onwards. Touching TRANS_PUSH
register from fronbuffer flush would be problematic as it's written by
DSB as well.
Fix this by using intel_psr_exit when flush or invalidate is done on
LunarLake and onwards. This is not possible on AlderLake and
MeteorLake due to HW bug in PSR2 disable.
This patch is also fixing problems with cursor plane where cursor is
disappearing or duplicate cursor is seen on the screen.
v2: Commit message updated
Bspec: 68927, 68934, 66624
Reported-by: Janna Martl <janna.martl109@gmail.com>
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/5522
Fixes: 411ad63877bb ("drm/i915/psr: Use SFF_CTL on invalidate/flush for LunarLake onwards")
Tested-by: Janna Martl <janna.martl109@gmail.com>
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/20250801062905.564453-1-jouni.hogander@intel.com
(cherry picked from commit 46fb38cb20c0d185a6391ab524b23e0e0219c41f)
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
|
|
As per the wa_18038517565, we need to disable FBC compressor
clock gating before enabling FBC and enable after disabling
FBC. Placing the enabling of clock gating in the fbc deactivate
function can make the above wa logic go wrong in case of
frontbuffer rendering FBC mechanism. FBC deactivate can get
called during fb invalidate and then the corresponding FBC
activate can get called without properly disabling the clock
gating and can result in compression stalled. So move the
enable clock gating at the end of one FBC session after FBC
is completely disabled for a pipe.
Bspec: 74212, 72197, 69741, 65555
Fixes: 010363c46189 ("drm/i915/display: implement wa_18038517565")
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://lore.kernel.org/r/20250729124648.288497-1-vinod.govindapillai@intel.com
(cherry picked from commit 82dde0407ab126f8413fd6c51429e5057ced5ba2)
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
|
|
Otherwise it would display the virtual allocation size, which is often
much bigger than the RSS.
Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Fixes: e48ade5e23ba ("drm/panfrost: show device-wide list of DRM GEM objects over DebugFS")
Tested-by: Christopher Healy <healych@amazon.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250808010235.2831853-1-adrian.larumbe@collabora.com
|
|
The commit 65c66047259f ("proc: fix the issue of proc_mem_open returning
NULL") caused proc_maps_open() to return -ESRCH when proc_mem_open()
returns NULL. This breaks legitimate /proc/<pid>/maps access for kernel
threads since kernel threads have NULL mm_struct.
The regression causes perf to fail and exit when profiling a kernel
thread:
# perf record -v -g -p $(pgrep kswapd0)
...
couldn't open /proc/65/task/65/maps
This patch partially reverts the commit to fix it.
Link: https://lkml.kernel.org/r/20250807165455.73656-1-wjl.linux@gmail.com
Fixes: 65c66047259f ("proc: fix the issue of proc_mem_open returning NULL")
Signed-off-by: Jialin Wang <wjl.linux@gmail.com>
Cc: Penglei Jiang <superman.xpt@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
It was discovered in the attached report that commit f822a9a81a31 ("mm:
optimize mremap() by PTE batching") introduced a significant performance
regression on a number of metrics on x86-64, most notably
stress-ng.bigheap.realloc_calls_per_sec - indicating a 37.3% regression in
number of mremap() calls per second.
I was able to reproduce this locally on an intel x86-64 raptor lake
system, noting an average of 143,857 realloc calls/sec (with a stddev of
4,531 or 3.1%) prior to this patch being applied, and 81,503 afterwards
(stddev of 2,131 or 2.6%) - a 43.3% regression.
During testing I was able to determine that there was no meaningful
difference in efforts to optimise the folio_pte_batch() operation, nor
checking folio_test_large().
This is within expectation, as a regression this large is likely to
indicate we are accessing memory that is not yet in a cache line (and
perhaps may even cause a main memory fetch).
The expectation by those discussing this from the start was that
vm_normal_folio() (invoked by mremap_folio_pte_batch()) would likely be
the culprit due to having to retrieve memory from the vmemmap (which
mremap() page table moves does not otherwise do, meaning this is
inevitably cold memory).
I was able to definitively determine that this theory is indeed correct
and the cause of the issue.
The solution is to restore part of an approach previously discarded on
review, that is to invoke pte_batch_hint() which explicitly determines,
through reference to the PTE alone (thus no vmemmap lookup), what the PTE
batch size may be.
On platforms other than arm64 this is currently hardcoded to return 1, so
this naturally resolves the issue for x86-64, and for arm64 introduces
little to no overhead as the pte cache line will be hot.
With this patch applied, we move from 81,503 realloc calls/sec to 138,701
(stddev of 496.1 or 0.4%), which is a -3.6% regression, however accounting
for the variance in the original result, this is broadly restoring
performance to its prior state.
Link: https://lkml.kernel.org/r/20250807185819.199865-1-lorenzo.stoakes@oracle.com
Fixes: f822a9a81a31 ("mm: optimize mremap() by PTE batching")
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202508071609.4e743d7c-lkp@intel.com
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Pedro Falcato <pfalcato@suse.de>
Reviewed-by: Barry Song <baohua@kernel.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Dev Jain <dev.jain@arm.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Jann Horn <jannh@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When UFFDIO_MOVE encounters a migration PMD entry, it proceeds with
obtaining a folio and accessing it even though the entry is swp_entry_t.
Add the missing check and let split_huge_pmd() handle migration entries.
While at it also remove unnecessary folio check.
[surenb@google.com: remove extra folio check, per David]
Link: https://lkml.kernel.org/r/20250807200418.1963585-1-surenb@google.com
Link: https://lkml.kernel.org/r/20250806220022.926763-1-surenb@google.com
Fixes: adef440691ba ("userfaultfd: UFFDIO_MOVE uABI")
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Reported-by: syzbot+b446dbe27035ef6bd6c2@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/68794b5c.a70a0220.693ce.0050.GAE@google.com/
Reviewed-by: Peter Xu <peterx@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Lokesh Gidra <lokeshgidra@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
In commit_anon_folio_batch(), we iterate over all pages pointed to by the
PTE batch. Therefore we need to know the first page of the batch;
currently we derive that via folio_page(folio, 0), but, that takes us to
the first (head) page of the folio instead - our PTE batch may lie in the
middle of the folio, leading to incorrectness.
Bite the bullet and throw away the micro-optimization of reusing the folio
in favour of code simplicity. Derive the page and the folio in
change_pte_range, and pass the page too to commit_anon_folio_batch to fix
the aforementioned issue.
Link: https://lkml.kernel.org/r/20250806145611.3962-1-dev.jain@arm.com
Fixes: cac1db8c3aad ("mm: optimize mprotect() by PTE batching")
Reported-by: syzbot+57bcc752f0df8bb1365c@syzkaller.appspotmail.com
Signed-off-by: Dev Jain <dev.jain@arm.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Debugged-by: David Hildenbrand <david@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Joey Gouly <joey.gouly@arm.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Lance Yang <ioworker0@gmail.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Cc: Yang Shi <yang@os.amperecomputing.com>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Cc: Zhenhua Huang <quic_zhenhuah@quicinc.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This change resolves non literal string format warning invoked for
proc-maps-race.c while compiling.
proc-maps-race.c:205:17: warning: format not a string literal and no format arguments [-Wformat-security]
205 | printf(text);
| ^~~~~~
proc-maps-race.c:209:17: warning: format not a string literal and no format arguments [-Wformat-security]
209 | printf(text);
| ^~~~~~
proc-maps-race.c: In function `print_last_lines':
proc-maps-race.c:224:9: warning: format not a string literal and no format arguments [-Wformat-security]
224 | printf(start);
| ^~~~~~
Add string format specifier %s for the printf calls in both
print_first_lines() and print_last_lines() thus resolving the warnings.
The test executes fine after this change thus causing no effect to the
functional behavior of the test.
Link: https://lkml.kernel.org/r/20250804225633.841777-1-hsukrut3@gmail.com
Fixes: aadc099c480f ("selftests/proc: add verbose mode for /proc/pid/maps tearing tests")
Signed-off-by: Sukrut Heroorkar <hsukrut3@gmail.com>
Acked-by: Suren Baghdasaryan <surenb@google.com>
Cc: David Hunter <david.hunter.linux@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Since 'snprintf()' returns the number of characters emitted, an
output position may be advanced with this return value rather
than using an explicit calls to 'strlen()'. Compile tested only.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
collect_sample() is used to gather samples of the data in a Write op for
analysis to try and determine if the compression algorithm is likely to
achieve anything more quickly than actually running the compression
algorithm.
However, collect_sample() assumes that the data it is going to be sampling
is stored in an ITER_XARRAY-type iterator (which it now should never be)
and doesn't actually check that it is before accessing the underlying
xarray directly.
Fix this by replacing the code with a loop that just uses the standard
iterator functions to sample every other 2KiB block, skipping the
intervening ones. It's not quite the same as the previous algorithm as it
doesn't necessarily align to the pages within an ordinary write from the
pagecache.
Note that the btrfs code from which this was derived samples the inode's
pagecache directly rather than the iterator - but that doesn't necessarily
work for network filesystems if O_DIRECT is in operation.
Fixes: 94ae8c3fee94 ("smb: client: compress: LZ77 code improvements cleanup")
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
cc: Enzo Matsumiya <ematsumiya@suse.de>
cc: Shyam Prasad N <sprasad@microsoft.com>
cc: Tom Talpey <tom@talpey.com>
cc: linux-cifs@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
dwc_eth_dwmac_probe() gets bulk clocks, and then prepares and enables
them. Unfortunately, if dwc_eth_dwmac_config_dt() or stmmac_dvr_probe()
fail, we leave the clocks prepared and enabled. Fix this by using
devm_clk_bulk_get_all_enabled() to combine the steps and provide devm
based release of the prepare and enable state.
This also fixes a similar leakin dwc_eth_dwmac_remove() which wasn't
correctly retrieving the struct plat_stmmacenet_data. This becomes
unnecessary.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Simon Horman <horms@kernel.org>
Fixes: a045e40645df ("net: stmmac: refactor clock management in EQoS driver")
Link: https://patch.msgid.link/E1ukM1X-0086qu-Td@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The PHY clock (bsp_priv->clk_phy) is obtained using of_clk_get(), which
doesn't take part in the devm release. Therefore, when a device is
unbound, this clock needs to be explicitly put. Fix this.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Simon Horman <horms@kernel.org>
Fixes: fecd4d7eef8b ("net: stmmac: dwmac-rk: Add integrated PHY support")
Link: https://patch.msgid.link/E1ukM1S-0086qo-PC@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As Kees points out, this is a kernel address leak, and debugging is
not a sufficiently good reason to expose the real kernel address.
Fixes: 65b584f53611 ("ref_tracker: automatically register a file in debugfs for a ref_tracker_dir")
Reported-by: Kees Cook <kees@kernel.org>
Closes: https://lore.kernel.org/netdev/202507301603.62E553F93@keescook/
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add the following Telit Cinterion FN990A w/audio composition:
0x1077: tty (diag) + adb + rmnet + audio + tty (AT/NMEA) + tty (AT) +
tty (AT) + tty (AT)
T: Bus=01 Lev=01 Prnt=01 Port=09 Cnt=01 Dev#= 8 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1bc7 ProdID=1077 Rev=05.04
S: Manufacturer=Telit Wireless Solutions
S: Product=FN990
S: SerialNumber=67e04c35
C: #Ifs=10 Cfg#= 1 Atr=e0 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 3 Alt= 0 #EPs= 0 Cls=01(audio) Sub=01 Prot=20 Driver=snd-usb-audio
I: If#= 4 Alt= 1 #EPs= 1 Cls=01(audio) Sub=02 Prot=20 Driver=snd-usb-audio
E: Ad=03(O) Atr=0d(Isoc) MxPS= 68 Ivl=1ms
I: If#= 5 Alt= 1 #EPs= 1 Cls=01(audio) Sub=02 Prot=20 Driver=snd-usb-audio
E: Ad=84(I) Atr=0d(Isoc) MxPS= 68 Ivl=1ms
I: If#= 6 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 7 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=88(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 8 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=8a(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 9 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=8c(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
Cc: stable@vger.kernel.org
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This reviewer's email no longer works. Remove it from MAINTAINERS.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Chandrashekar Devegowda <chandrashekar.devegowda@intel.com>
Cc: Liu Haijun <haijun.liu@mediatek.com>
Cc: Ricardo Martinez <ricardo.martinez@linux.intel.com>
Link: https://patch.msgid.link/20250808173925.FECE3782@davehans-spike.ostc.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This maintainer's email no longer works. Remove it from MAINTAINERS.
Also mark the code as an Orphan.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Tianfei Zhang <tianfei.zhang@intel.com>
Cc: Andrew Lunn <andrew+netdev@lunn.ch>
Link: https://patch.msgid.link/20250808175324.8C4B7354@davehans-spike.ostc.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This maintainer's email no longer works. Remove it from MAINTAINERS.
I've been unable to locate a new maintainer for this at Intel. Mark
the driver as Orphaned.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Loic Poulain <loic.poulain@oss.qualcomm.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Andrew Lunn <andrew+netdev@lunn.ch>
Acked-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Link: https://patch.msgid.link/20250808174505.C9FF434F@davehans-spike.ostc.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Problem
-------
With CONFIG_X86_DEBUG_FPU enabled, reading /proc/[kthread]/arch_status
causes a warning and a NULL pointer dereference.
This is because the AVX-512 timestamp code uses x86_task_fpu() but
doesn't check it for NULL. CONFIG_X86_DEBUG_FPU addles that function
for kernel threads (PF_KTHREAD specifically), making it return NULL.
The point of the warning was to ensure that kernel threads only access
task->fpu after going through kernel_fpu_begin()/_end(). Note: all
kernel tasks exposed in /proc have a valid task->fpu.
Solution
--------
One option is to silence the warning and check for NULL from
x86_task_fpu(). However, that warning is fairly fresh and seems like a
defense against misuse of the FPU state in kernel threads.
Instead, stop outputting AVX-512_elapsed_ms for kernel threads
altogether. The data was garbage anyway because avx512_timestamp is
only updated for user threads, not kernel threads.
If anyone ever wants to track kernel thread AVX-512 use, they can come
back later and do it properly, separate from this bug fix.
[ dhansen: mostly rewrite changelog ]
Fixes: 22aafe3bcb67 ("x86/fpu: Remove init_task FPU state dependencies, add debugging warning for PF_KTHREAD tasks")
Co-developed-by: Sohil Mehta <sohil.mehta@intel.com>
Signed-off-by: Sohil Mehta <sohil.mehta@intel.com>
Signed-off-by: Fushuai Wang <wangfushuai@baidu.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20250811185044.2227268-1-sohil.mehta%40intel.com
|
|
Prevent intel_pstate from loading when OOB (Out Of Band) P-states mode is
enabled.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://patch.msgid.link/20250808145122.4057208-1-srinivas.pandruvada@linux.intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Marc has reported that commit 85975daeaa4d ("cpuidle: menu: Avoid
discarding useful information") caused the number of wakeup interrupts
to increase on an idle system [1], which was not expected to happen
after merely allowing shallower idle states to be selected by the
governor in some cases.
However, on the system in question, all of the idle states deeper than
WFI are rejected by the driver due to a firmware issue [2]. This causes
the governor to only consider the recent interval duriation data
corresponding to attempts to enter WFI that are successful and the
recent invervals table is filled with values lower than the scheduler
tick period. Consequently, the governor predicts an idle duration
below the scheduler tick period length and avoids stopping the tick
more often which leads to the observed symptom.
Address it by modifying the governor to update the recent intervals
table also when entering the previously selected idle state fails, so
it knows that the short idle intervals might have been the minority
had the selected idle states been actually entered every time.
Fixes: 85975daeaa4d ("cpuidle: menu: Avoid discarding useful information")
Link: https://lore.kernel.org/linux-pm/86o6sv6n94.wl-maz@kernel.org/ [1]
Link: https://lore.kernel.org/linux-pm/7ffcb716-9a1b-48c2-aaa4-469d0df7c792@arm.com/ [2]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Christian Loehle <christian.loehle@arm.com>
Tested-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
Link: https://patch.msgid.link/2793874.mvXUDI8C0e@rafael.j.wysocki
|
|
There is no reason to limit intel_idle's loading of ACPI tables to
family 6. Upcoming Intel processors are not in family 6.
Below "Fixes" really means "applies cleanly until".
That syntax commit didn't change the previous logic,
but shows this patch applies back 5-years.
Fixes: 4a9f45a0533f ("intel_idle: Convert to new X86 CPU match macros")
Signed-off-by: Len Brown <len.brown@intel.com>
Link: https://patch.msgid.link/06101aa4fe784e5b0be1cb2c0bdd9afcf16bd9d4.1754681697.git.len.brown@intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The symbol wb_window_usec cannot be found. Update the doc to reflect the
latest implementation, in other words, the debugfs interface
'curr_win_nsec'.
Signed-off-by: Tang Yizhou <yizhou.tang@shopee.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20250727173959.160835-4-yizhou.tang@shopee.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In the current implementation, the last_issue and last_comp members of
struct rq_wb are used only by read requests and not by non-throttled write
requests. Therefore, eliminate the ambiguity here.
Signed-off-by: Tang Yizhou <yizhou.tang@shopee.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20250727173959.160835-3-yizhou.tang@shopee.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In the current implementation, the sync_cookie and last_cookie members of
struct rq_wb are used only by read requests and not by non-throttled write
requests. Based on this, we can optimize wbt_done() by removing one if
condition check for non-throttled write requests.
Signed-off-by: Tang Yizhou <yizhou.tang@shopee.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20250727173959.160835-2-yizhou.tang@shopee.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
