summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2025-08-01net/sched: taprio: enforce minimum value for picos_per_byteTakamitsu Iwai
Syzbot reported a WARNING in taprio_get_start_time(). When link speed is 470,589 or greater, q->picos_per_byte becomes too small, causing length_to_duration(q, ETH_ZLEN) to return zero. This zero value leads to validation failures in fill_sched_entry() and parse_taprio_schedule(), allowing arbitrary values to be assigned to entry->interval and cycle_time. As a result, sched->cycle can become zero. Since SPEED_800000 is the largest defined speed in include/uapi/linux/ethtool.h, this issue can occur in realistic scenarios. To ensure length_to_duration() returns a non-zero value for minimum-sized Ethernet frames (ETH_ZLEN = 60), picos_per_byte must be at least 17 (60 * 17 > PSEC_PER_NSEC which is 1000). This patch enforces a minimum value of 17 for picos_per_byte when the calculated value would be lower, and adds a warning message to inform users that scheduling accuracy may be affected at very high link speeds. Fixes: fb66df20a720 ("net/sched: taprio: extend minimum interval restriction to entire cycle too") Reported-by: syzbot+398e1ee4ca2cac05fddb@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=398e1ee4ca2cac05fddb Signed-off-by: Takamitsu Iwai <takamitz@amazon.co.jp> Link: https://patch.msgid.link/20250728173149.45585-1-takamitz@amazon.co.jp Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-08-01net: drop UFO packets in udp_rcv_segment()Wang Liang
When sending a packet with virtio_net_hdr to tun device, if the gso_type in virtio_net_hdr is SKB_GSO_UDP and the gso_size is less than udphdr size, below crash may happen. ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:4572! Oops: invalid opcode: 0000 [#1] SMP NOPTI CPU: 0 UID: 0 PID: 62 Comm: mytest Not tainted 6.16.0-rc7 #203 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 RIP: 0010:skb_pull_rcsum+0x8e/0xa0 Code: 00 00 5b c3 cc cc cc cc 8b 93 88 00 00 00 f7 da e8 37 44 38 00 f7 d8 89 83 88 00 00 00 48 8b 83 c8 00 00 00 5b c3 cc cc cc cc <0f> 0b 0f 0b 66 66 2e 0f 1f 84 00 000 RSP: 0018:ffffc900001fba38 EFLAGS: 00000297 RAX: 0000000000000004 RBX: ffff8880040c1000 RCX: ffffc900001fb948 RDX: ffff888003e6d700 RSI: 0000000000000008 RDI: ffff88800411a062 RBP: ffff8880040c1000 R08: 0000000000000000 R09: 0000000000000001 R10: ffff888003606c00 R11: 0000000000000001 R12: 0000000000000000 R13: ffff888004060900 R14: ffff888004050000 R15: ffff888004060900 FS: 000000002406d3c0(0000) GS:ffff888084a19000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000040 CR3: 0000000004007000 CR4: 00000000000006f0 Call Trace: <TASK> udp_queue_rcv_one_skb+0x176/0x4b0 net/ipv4/udp.c:2445 udp_queue_rcv_skb+0x155/0x1f0 net/ipv4/udp.c:2475 udp_unicast_rcv_skb+0x71/0x90 net/ipv4/udp.c:2626 __udp4_lib_rcv+0x433/0xb00 net/ipv4/udp.c:2690 ip_protocol_deliver_rcu+0xa6/0x160 net/ipv4/ip_input.c:205 ip_local_deliver_finish+0x72/0x90 net/ipv4/ip_input.c:233 ip_sublist_rcv_finish+0x5f/0x70 net/ipv4/ip_input.c:579 ip_sublist_rcv+0x122/0x1b0 net/ipv4/ip_input.c:636 ip_list_rcv+0xf7/0x130 net/ipv4/ip_input.c:670 __netif_receive_skb_list_core+0x21d/0x240 net/core/dev.c:6067 netif_receive_skb_list_internal+0x186/0x2b0 net/core/dev.c:6210 napi_complete_done+0x78/0x180 net/core/dev.c:6580 tun_get_user+0xa63/0x1120 drivers/net/tun.c:1909 tun_chr_write_iter+0x65/0xb0 drivers/net/tun.c:1984 vfs_write+0x300/0x420 fs/read_write.c:593 ksys_write+0x60/0xd0 fs/read_write.c:686 do_syscall_64+0x50/0x1c0 arch/x86/entry/syscall_64.c:63 </TASK> To trigger gso segment in udp_queue_rcv_skb(), we should also set option UDP_ENCAP_ESPINUDP to enable udp_sk(sk)->encap_rcv. When the encap_rcv hook return 1 in udp_queue_rcv_one_skb(), udp_csum_pull_header() will try to pull udphdr, but the skb size has been segmented to gso size, which leads to this crash. Previous commit cf329aa42b66 ("udp: cope with UDP GRO packet misdirection") introduces segmentation in UDP receive path only for GRO, which was never intended to be used for UFO, so drop UFO packets in udp_rcv_segment(). Link: https://lore.kernel.org/netdev/20250724083005.3918375-1-wangliang74@huawei.com/ Link: https://lore.kernel.org/netdev/20250729123907.3318425-1-wangliang74@huawei.com/ Fixes: cf329aa42b66 ("udp: cope with UDP GRO packet misdirection") Suggested-by: Willem de Bruijn <willemdebruijn.kernel@gmail.com> Signed-off-by: Wang Liang <wangliang74@huawei.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/20250730101458.3470788-1-wangliang74@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-08-01Merge tag 'rproc-v6.17' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux Pull remoteproc updates from Bjorn Andersson: - Make the Xilinx remoteproc driver support running on only a single core, disable still unsupported remoteproc features, and stop the remoteproc on shutdown to facilitate kexec. - Conclude the renaming of the Qualcomm ADSP driver to "PAS" that was started many years ago. * tag 'rproc-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: remoteproc: xlnx: Fix kernel-doc warnings remoteproc: xlnx: Disable unsupported features remoteproc: xlnx: Add shutdown callback remoteproc: xlnx: Allow single core use in split mode dt-bindings: remoteproc: qcom,sa8775p-pas: Correct the interrupt number remoteproc: Don't use %pK through printk dt-bindings: remoteproc: qcom,sm8150-pas: Document QCS615 remoteproc remoteproc: qcom: pas: Conclude the rename from adsp
2025-08-01selftests/bpf: Test for unaligned flow_dissector ctx accessPaul Chaignon
This patch adds tests for two context fields where unaligned accesses were not properly rejected. Note the new macro is similar to the existing narrow_load macro, but we need a different description and access offset. Combining the two macros into one is probably doable but I don't think it would help readability. vmlinux.h is included in place of bpf.h so we have the definition of struct bpf_nf_ctx. Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com> Tested-by: Eduard Zingerman <eddyz87@gmail.com> Acked-by: Yonghong Song <yonghong.song@linux.dev> Link: https://lore.kernel.org/r/bf014046ddcf41677fb8b98d150c14027e9fddba.1754039605.git.paul.chaignon@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2025-08-01net: mdio: mdio-bcm-unimac: Correct rate fallback logicFlorian Fainelli
When the parent clock is a gated clock which has multiple parents, the clock provider (clk-scmi typically) might return a rate of 0 since there is not one of those particular parent clocks that should be chosen for returning a rate. Prior to ee975351cf0c ("net: mdio: mdio-bcm-unimac: Manage clock around I/O accesses"), we would not always be passing a clock reference depending upon how mdio-bcm-unimac was instantiated. In that case, we would take the fallback path where the rate is hard coded to 250MHz. Make sure that we still fallback to using a fixed rate for the divider calculation, otherwise we simply ignore the desired MDIO bus clock frequency which can prevent us from interfacing with Ethernet PHYs properly. Fixes: ee975351cf0c ("net: mdio: mdio-bcm-unimac: Manage clock around I/O accesses") Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250730202533.3463529-1-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-08-01ipv6: reject malicious packets in ipv6_gso_segment()Eric Dumazet
syzbot was able to craft a packet with very long IPv6 extension headers leading to an overflow of skb->transport_header. This 16bit field has a limited range. Add skb_reset_transport_header_careful() helper and use it from ipv6_gso_segment() WARNING: CPU: 0 PID: 5871 at ./include/linux/skbuff.h:3032 skb_reset_transport_header include/linux/skbuff.h:3032 [inline] WARNING: CPU: 0 PID: 5871 at ./include/linux/skbuff.h:3032 ipv6_gso_segment+0x15e2/0x21e0 net/ipv6/ip6_offload.c:151 Modules linked in: CPU: 0 UID: 0 PID: 5871 Comm: syz-executor211 Not tainted 6.16.0-rc6-syzkaller-g7abc678e3084 #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/12/2025 RIP: 0010:skb_reset_transport_header include/linux/skbuff.h:3032 [inline] RIP: 0010:ipv6_gso_segment+0x15e2/0x21e0 net/ipv6/ip6_offload.c:151 Call Trace: <TASK> skb_mac_gso_segment+0x31c/0x640 net/core/gso.c:53 nsh_gso_segment+0x54a/0xe10 net/nsh/nsh.c:110 skb_mac_gso_segment+0x31c/0x640 net/core/gso.c:53 __skb_gso_segment+0x342/0x510 net/core/gso.c:124 skb_gso_segment include/net/gso.h:83 [inline] validate_xmit_skb+0x857/0x11b0 net/core/dev.c:3950 validate_xmit_skb_list+0x84/0x120 net/core/dev.c:4000 sch_direct_xmit+0xd3/0x4b0 net/sched/sch_generic.c:329 __dev_xmit_skb net/core/dev.c:4102 [inline] __dev_queue_xmit+0x17b6/0x3a70 net/core/dev.c:4679 Fixes: d1da932ed4ec ("ipv6: Separate ipv6 offload support") Reported-by: syzbot+af43e647fd835acc02df@syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/688a1a05.050a0220.5d226.0008.GAE@google.com/T/#u Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Dawid Osuchowski <dawid.osuchowski@linux.intel.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/20250730131738.3385939-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-08-01selftests: avoid using ifconfigEric Dumazet
ifconfig is deprecated and not always present, use ip command instead. Fixes: e0f3b3e5c77a ("selftests: Add test cases for vlan_filter modification during runtime") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Dong Chenchen <dongchenchen2@huawei.com> Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Link: https://patch.msgid.link/20250730115313.3356036-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-08-01dpll: Make ZL3073X invisibleGeert Uytterhoeven
Currently, the user is always asked about the Microchip Azurite DPLL/PTP/SyncE core driver, even when I2C and SPI are disabled, and thus the driver cannot be used at all. Fix this by making the Kconfig symbol for the core driver invisible (unless compile-testing), and selecting it by the bus glue sub-drivers. Drop the modular defaults, as drivers should not default to enabled. Fixes: 2df8e64e01c10a4b ("dpll: Add basic Microchip ZL3073x support") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://patch.msgid.link/97804163aeb262f0e0706d00c29d9bb751844454.1753874405.git.geert+renesas@glider.be Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-08-01net/mlx5: Correctly set gso_segs when LRO is usedChristoph Paasch
When gso_segs is left at 0, a number of assumptions will end up being incorrect throughout the stack. For example, in the GRO-path, we set NAPI_GRO_CB()->count to gso_segs. So, if a non-LRO'ed packet followed by an LRO'ed packet is being processed in GRO, the first one will have NAPI_GRO_CB()->count set to 1 and the next one to 0 (in dev_gro_receive()). Since commit 531d0d32de3e ("net/mlx5: Correctly set gso_size when LRO is used") these packets will get merged (as their gso_size now matches). So, we end up in gro_complete() with NAPI_GRO_CB()->count == 1 and thus don't call inet_gro_complete(). Meaning, checksum-validation in tcp_checksum_complete() will fail with a "hw csum failure". Even before the above mentioned commit, incorrect gso_segs means that other things like TCP's accounting of incoming packets (tp->segs_in, data_segs_in, rcv_ooopack) will be incorrect. Which means that if one does bytes_received/data_segs_in, the result will be bigger than the MTU. Fix this by initializing gso_segs correctly when LRO is used. Fixes: e586b3b0baee ("net/mlx5: Ethernet Datapath files") Reported-by: Gal Pressman <gal@nvidia.com> Closes: https://lore.kernel.org/netdev/6583783f-f0fb-4fb1-a415-feec8155bc69@nvidia.com/ Signed-off-by: Christoph Paasch <cpaasch@openai.com> Reviewed-by: Gal Pressman <gal@nvidia.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20250729-mlx5_gso_segs-v1-1-b48c480c1c12@openai.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-08-01Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds
Pull virtio updates from Michael Tsirkin: - vhost can now support legacy threading if enabled in Kconfig - vsock memory allocation strategies for large buffers have been improved, reducing pressure on kmalloc - vhost now supports the in-order feature. guest bits missed the merge window. - fixes, cleanups all over the place * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (30 commits) vsock/virtio: Allocate nonlinear SKBs for handling large transmit buffers vsock/virtio: Rename virtio_vsock_skb_rx_put() vhost/vsock: Allocate nonlinear SKBs for handling large receive buffers vsock/virtio: Move SKB allocation lower-bound check to callers vsock/virtio: Rename virtio_vsock_alloc_skb() vsock/virtio: Resize receive buffers so that each SKB fits in a 4K page vsock/virtio: Move length check to callers of virtio_vsock_skb_rx_put() vsock/virtio: Validate length in packet header before skb_put() vhost/vsock: Avoid allocating arbitrarily-sized SKBs vhost_net: basic in_order support vhost: basic in order support vhost: fail early when __vhost_add_used() fails vhost: Reintroduce kthread API and add mode selection vdpa: Fix IDR memory leak in VDUSE module exit vdpa/mlx5: Fix release of uninitialized resources on error path vhost-scsi: Fix check for inline_sg_cnt exceeding preallocated limit virtio: virtio_dma_buf: fix missing parameter documentation vhost: Fix typos vhost: vringh: Remove unused functions vhost: vringh: Remove unused iotlb functions ...
2025-08-01sfc: unfix not-a-typo in commentEdward Cree
Commit fe09560f8241 ("net: Fix typos") removed duplicated word 'fallback', but this was not a typo and change altered the semantic meaning of the comment. Partially revert, using the phrase 'fallback of the fallback' to make the meaning more clear to future readers so that they won't try to change it again. Signed-off-by: Edward Cree <ecree.xilinx@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250731144138.2637949-1-edward.cree@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-08-01Merge tag 'pci-v6.17-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci Pull PCI updates from Bjorn Helgaas: "Enumeration: - Allow built-in drivers, not just modular drivers, to use async initial probing (Lukas Wunner) - Support Immediate Readiness even on devices with no PM Capability (Sean Christopherson) - Consolidate definition of PCIE_RESET_CONFIG_WAIT_MS (100ms), the required delay between a reset and sending config requests to a device (Niklas Cassel) - Add pci_is_display() to check for "Display" base class and use it in ALSA hda, vfio, vga_switcheroo, vt-d (Mario Limonciello) - Allow 'isolated PCI functions' (multi-function devices without a function 0) for LoongArch, similar to s390 and jailhouse (Huacai Chen) Power control: - Add ability to enable optional slot clock for cases where the PCIe host controller and the slot are supplied by different clocks (Marek Vasut) PCIe native device hotplug: - Fix runtime PM ref imbalance on Hot-Plug Capable ports caused by misinterpreting a config read failure after a device has been removed (Lukas Wunner) - Avoid creating a useless PCIe port service device for pciehp if the slot is handled by the ACPI hotplug driver (Lukas Wunner) - Ignore ACPI hotplug slots when calculating depth of pciehp hotplug ports (Lukas Wunner) Virtualization: - Save VF resizable BAR state and restore it after reset (Michał Winiarski) - Allow IOV resources (VF BARs) to be resized (Michał Winiarski) - Add pci_iov_vf_bar_set_size() so drivers can control VF BAR size (Michał Winiarski) Endpoint framework: - Add RC-to-EP doorbell support using platform MSI controller, including a test case (Frank Li) - Allow BAR assignment via configfs so platforms have flexibility in determining BAR usage (Jerome Brunet) Native PCIe controller drivers: - Convert amazon,al-alpine-v[23]-pcie, apm,xgene-pcie, axis,artpec6-pcie, marvell,armada-3700-pcie, st,spear1340-pcie to DT schema format (Rob Herring) - Use dev_fwnode() instead of of_fwnode_handle() to remove OF dependency in altera (fixes an unused variable), designware-host, mediatek, mediatek-gen3, mobiveil, plda, xilinx, xilinx-dma, xilinx-nwl (Jiri Slaby, Arnd Bergmann) - Convert aardvark, altera, brcmstb, designware-host, iproc, mediatek, mediatek-gen3, mobiveil, plda, rcar-host, vmd, xilinx, xilinx-dma, xilinx-nwl from using pci_msi_create_irq_domain() to using msi_create_parent_irq_domain() instead; this makes the interrupt controller per-PCI device, allows dynamic allocation of vectors after initialization, and allows support of IMS (Nam Cao) APM X-Gene PCIe controller driver: - Rewrite MSI handling to MSI CPU affinity, drop useless CPU hotplug bits, use device-managed memory allocations, and clean things up (Marc Zyngier) - Probe xgene-msi as a standard platform driver rather than a subsys_initcall (Marc Zyngier) Broadcom STB PCIe controller driver: - Add optional DT 'num-lanes' property and if present, use it to override the Maximum Link Width advertised in Link Capabilities (Jim Quinlan) Cadence PCIe controller driver: - Use PCIe Message routing types from the PCI core rather than defining private ones (Hans Zhang) Freescale i.MX6 PCIe controller driver: - Add IMX8MQ_EP third 64-bit BAR in epc_features (Richard Zhu) - Add IMX8MM_EP and IMX8MP_EP fixed 256-byte BAR 4 in epc_features (Richard Zhu) - Configure LUT for MSI/IOMMU in Endpoint mode so Root Complex can trigger doorbel on Endpoint (Frank Li) - Remove apps_reset (LTSSM_EN) from imx_pcie_{assert,deassert}_core_reset(), which fixes a hotplug regression on i.MX8MM (Richard Zhu) - Delay Endpoint link start until configfs 'start' written (Richard Zhu) Intel VMD host bridge driver: - Add Intel Panther Lake (PTL)-H/P/U Vendor ID (George D Sworo) Qualcomm PCIe controller driver: - Add DT binding and driver support for SA8255p, which supports ECAM for Configuration Space access (Mayank Rana) - Update DT binding and driver to describe PHYs and per-Root Port resets in a Root Port stanza and deprecate describing them in the host bridge; this makes it possible to support multiple Root Ports in the future (Krishna Chaitanya Chundru) - Add Qualcomm QCS615 to SM8150 DT binding (Ziyue Zhang) - Add Qualcomm QCS8300 to SA8775p DT binding (Ziyue Zhang) - Drop TBU and ref clocks from Qualcomm SM8150 and SC8180x DT bindings (Konrad Dybcio) - Document 'link_down' reset in Qualcomm SA8775P DT binding (Ziyue Zhang) - Add required PCIE_RESET_CONFIG_WAIT_MS delay after Link up IRQ (Niklas Cassel) Rockchip PCIe controller driver: - Drop unused PCIe Message routing and code definitions (Hans Zhang) - Remove several unused header includes (Hans Zhang) - Use standard PCIe config register definitions instead of rockchip-specific redefinitions (Geraldo Nascimento) - Set Target Link Speed to 5.0 GT/s before retraining so we have a chance to train at a higher speed (Geraldo Nascimento) Rockchip DesignWare PCIe controller driver: - Prevent race between link training and register update via DBI by inhibiting link training after hot reset and link down (Wilfred Mallawa) - Add required PCIE_RESET_CONFIG_WAIT_MS delay after Link up IRQ (Niklas Cassel) Sophgo PCIe controller driver: - Add DT binding and driver for Sophgo SG2044 PCIe controller driver in Root Complex mode (Inochi Amaoto) Synopsys DesignWare PCIe controller driver: - Add required PCIE_RESET_CONFIG_WAIT_MS after waiting for Link up on Ports that support > 5.0 GT/s. Slower Ports still rely on the not-quite-correct PCIE_LINK_WAIT_SLEEP_MS 90ms default delay while waiting for the Link (Niklas Cassel)" * tag 'pci-v6.17-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (116 commits) dt-bindings: PCI: qcom,pcie-sa8775p: Document 'link_down' reset dt-bindings: PCI: Remove 83xx-512x-pci.txt dt-bindings: PCI: Convert amazon,al-alpine-v[23]-pcie to DT schema dt-bindings: PCI: Convert marvell,armada-3700-pcie to DT schema dt-bindings: PCI: Convert apm,xgene-pcie to DT schema dt-bindings: PCI: Convert axis,artpec6-pcie to DT schema dt-bindings: PCI: Convert st,spear1340-pcie to DT schema PCI: Move is_pciehp check out of pciehp_is_native() PCI: pciehp: Use is_pciehp instead of is_hotplug_bridge PCI/portdrv: Use is_pciehp instead of is_hotplug_bridge PCI/ACPI: Fix runtime PM ref imbalance on Hot-Plug Capable ports selftests: pci_endpoint: Add doorbell test case misc: pci_endpoint_test: Add doorbell test case PCI: endpoint: pci-epf-test: Add doorbell test support PCI: endpoint: Add pci_epf_align_inbound_addr() helper for inbound address alignment PCI: endpoint: pci-ep-msi: Add checks for MSI parent and mutability PCI: endpoint: Add RC-to-EP doorbell support using platform MSI controller PCI: dwc: Add Sophgo SG2044 PCIe controller driver in Root Complex mode PCI: vmd: Switch to msi_create_parent_irq_domain() PCI: vmd: Convert to lock guards ...
2025-08-01net: airoha: Fix PPE table access in airoha_ppe_debugfs_foe_show()Lorenzo Bianconi
In order to avoid any possible race we need to hold the ppe_lock spinlock accessing the hw PPE table. airoha_ppe_foe_get_entry routine is always executed holding ppe_lock except in airoha_ppe_debugfs_foe_show routine. Fix the problem introducing airoha_ppe_foe_get_entry_locked routine. Fixes: 3fe15c640f380 ("net: airoha: Introduce PPE debugfs support") Reviewed-by: Dawid Osuchowski <dawid.osuchowski@linux.intel.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://patch.msgid.link/20250731-airoha_ppe_foe_get_entry_locked-v2-1-50efbd8c0fd6@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-08-01selftests: net: Fix flaky neighbor garbage collection testIdo Schimmel
The purpose of the "Periodic garbage collection" test case is to make sure that "extern_valid" neighbors are not flushed during periodic garbage collection, unlike regular neighbor entries. The test case is currently doing the following: 1. Changing the base reachable time to 10 seconds so that periodic garbage collection will run every 5 seconds. 2. Changing the garbage collection stale time to 5 seconds so that neighbors that have not been used in the last 5 seconds will be considered for removal. 3. Waiting for the base reachable time change to take effect. 4. Adding an "extern_valid" neighbor, a non-"extern_valid" neighbor and a bunch of other neighbors so that the threshold ("thresh1") will be crossed and stale neighbors will be flushed during garbage collection. 5. Waiting for 10 seconds to give garbage collection a chance to run. 6. Checking that the "extern_valid" neighbor was not flushed and that the non-"extern_valid" neighbor was flushed. The test sometimes fails in the netdev CI because the non-"extern_valid" neighbor was not flushed. I am unable to reproduce this locally, but my theory that since we do not know exactly when the periodic garbage collection runs, it is possible for it to run at a time when the non-"extern_valid" neighbor is still not considered stale. Fix by moving the addition of the two neighbors before step 3 and by reducing the garbage collection stale time to 1 second, to ensure that both neighbors are considered stale when garbage collection runs. Fixes: 171f2ee31a42 ("selftests: net: Add a selftest for externally validated neighbor entries") Reported-by: Jakub Kicinski <kuba@kernel.org> Closes: https://lore.kernel.org/netdev/20250728093504.4ebbd73c@kernel.org/ Signed-off-by: Ido Schimmel <idosch@nvidia.com> Link: https://patch.msgid.link/20250731110914.506890-1-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-08-01ring-buffer: Convert ring_buffer_write() to use guard(preempt_notrace)Steven Rostedt
The function ring_buffer_write() has a goto out to only do a preempt_enable_notrace(). This can be replaced by a guard. Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Andrew Morton <akpm@linux-foundation.org> Link: https://lore.kernel.org/20250801203858.205479143@kernel.org Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2025-08-01tracing: Use __free(kfree) in trace.c to remove gotosSteven Rostedt
There's a couple of locations that have goto out in trace.c for the only purpose of freeing a variable that was allocated. These can be replaced with __free(kfree). Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Andrew Morton <akpm@linux-foundation.org> Link: https://lore.kernel.org/20250801203858.040892777@kernel.org Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2025-08-01tracing: Add guard() around locks and mutexes in trace.cSteven Rostedt
There's several locations in trace.c that can be simplified by using guards around raw_spin_lock_irqsave, mutexes and preempt disabling. Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Andrew Morton <akpm@linux-foundation.org> Link: https://lore.kernel.org/20250801203857.879085376@kernel.org Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2025-08-01tracing: Add guard(ring_buffer_nest)Steven Rostedt
Some calls to the tracing ring buffer can happen when the ring buffer is already being written to by the same context (for example, a trace_printk() in between a ring_buffer_lock_reserve() and a ring_buffer_unlock_commit()). In order to not trigger the recursion detection, these functions use ring_buffer_nest_start() and ring_buffer_nest_end(). Create a guard() for these functions so that their use cases can be simplified and not need to use goto for the release. Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Andrew Morton <akpm@linux-foundation.org> Link: https://lore.kernel.org/20250801203857.710501021@kernel.org Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2025-08-01tracing: Remove unneeded goto out logicSteven Rostedt
Several places in the trace.c file there's a goto out where the out is simply a return. There's no reason to jump to the out label if it's not doing any more logic but simply returning from the function. Replace the goto outs with a return and remove the out labels. Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Andrew Morton <akpm@linux-foundation.org> Link: https://lore.kernel.org/20250801203857.538726745@kernel.org Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2025-08-01Merge tag 'linux-watchdog-6.17-rc1' of ↵Linus Torvalds
git://www.linux-watchdog.org/linux-watchdog Pull watchdog updates from Wim Van Sebroeck: - sbsa: Adjust keepalive timeout to avoid MediaTek WS0 race condition - Various improvements and fixes * tag 'linux-watchdog-6.17-rc1' of git://www.linux-watchdog.org/linux-watchdog: watchdog: sbsa: Adjust keepalive timeout to avoid MediaTek WS0 race condition watchdog: dw_wdt: Fix default timeout watchdog: Don't use "proxy" headers watchdog: it87_wdt: Don't use "proxy" headers watchdog: renesas_wdt: Convert to DEFINE_SIMPLE_DEV_PM_OPS() watchdog: iTCO_wdt: Report error if timeout configuration fails watchdog: rti_wdt: Use of_reserved_mem_region_to_resource() for "memory-region" dt-bindings: watchdog: nxp,pnx4008-wdt: allow clocks property watchdog: ziirave_wdt: check record length in ziirave_firm_verify()
2025-08-01Add audio support for acp7.2 platformMark Brown
Merge series from Venkata Prasad Potturu <venkataprasad.potturu@amd.com>: This patch series is to add legacy and sof audio support for acp7.2 platform.
2025-08-01Merge tag 'dmaengine-6.17-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine Pull dmaengine updates from Vinod Koul: "Core: - Managed API for dma channel request New support: - Sophgo CV18XX/SG200X dmamux driver - Qualcomm Milos GPI, sc8280xp GPI support Updates: - Conversion of brcm,iproc-sba and marvell,orion-xor binding - Unused code cleanup across drivers" * tag 'dmaengine-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (23 commits) dt-bindings: dma: fsl-mxs-dma: allow interrupt-names for fsl,imx23-dma-apbx dmaengine: xdmac: make it selectable for ARCH_MICROCHIP dt-bindings: dma: Convert marvell,orion-xor to DT schema dt-bindings: dma: Convert brcm,iproc-sba to DT schema dmaengine: nbpfaxi: Add missing check after DMA map dmaengine: mv_xor: Fix missing check after DMA map and missing unmap dt-bindings: dma: qcom,gpi: document the Milos GPI DMA Engine dmaengine: idxd: Remove __packed from structures dmaengine: ti: Do not enable by default during compile testing dmaengine: sh: Do not enable SH_DMAE_BASE by default during compile testing dmaengine: idxd: Fix warning for deadcode.deadstore dmaengine: mmp: Fix again Wvoid-pointer-to-enum-cast warning dmaengine: fsl-qdma: Add missing fsl_qdma_format kerneldoc dmaengine: qcom: gpi: Drop unused gpi_write_reg_field() dmaengine: fsl-dpaa2-qdma: Drop unused mc_enc() dmaengine: dw-edma: Drop unused dchan2dev() and chan2dev() dmaengine: stm32: Don't use %pK through printk dmaengine: stm32-dma: configure next sg only if there are more than 2 sgs dmaengine: sun4i: Simplify error handling in probe() dt-bindings: dma: qcom,gpi: Document the sc8280xp GPI DMA engine ...
2025-08-01Merge tag 'phy-for-6.17' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy Pull phy updates from Vinod Koul: "New Support: - Qualcomm Milos Synopsys eUSB2 PHY, SM8750 QMP phy support, M31 eUSB2 PHY driver - Samsung Exynos990 usbdrd phy, Exynos7870 MIPI phy support - Renesas RZ/V2N usb2-phy support Updates: - Bulk Yaml binding conversion By Rob H (too many to be listed) - cadence: Sierra PCIe, USB PHY multilink configuration support - Qualcomm refactoring of UFS PHY reset and UFS driver support for phy calibrate API" * tag 'phy-for-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (74 commits) phy: qcom: phy-qcom-m31: Update IPQ5332 M31 USB phy initialization sequence dt-bindings: phy: Convert brcm,sr-usb-combo-phy to DT schema dt-bindings: phy: Convert ti,da830-usb-phy to DT schema dt-bindings: phy: marvell,mmp2-usb-phy: Drop status from the example dt-bindings: phy: mixel, mipi-dsi-phy: Allow assigned-clock* properties phy: exynos-mipi-video: correct cam0 sysreg property name for exynos7870 phy: qcom: phy-qcom-snps-eusb2: Update init sequence per HPG 1.0.2 phy: qcom: phy-qcom-snps-eusb2: Add missing write from init sequence dt-bindings: phy: qcom,snps-eusb2: document the Milos Synopsys eUSB2 PHY dt-bindings: usb: qcom,snps-dwc3: Add Milos compatible phy: rockchip-pcie: Properly disable TEST_WRITE strobe signal phy: rockchip-pcie: Enable all four lanes if required dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Update pcie phy bindings for QCS615 phy: qcom: qmp-combo: Add missing PLL (VCO) configuration on SM8750 phy: qcom: m31-eusb2: drop registration printk phy: qcom: m31-eusb2: fix match data santity check phy: qcom: qmp-pcie: Update PHY settings for QCS8300 & SA8775P phy: qualcomm: phy-qcom-eusb2-repeater: Don't zero-out registers dt-bindings: phy: qcom,snps-eusb2-repeater: Remove default tuning values phy: mediatek: tphy: Cleanup and document slew calibration ...
2025-08-01Merge tag 'sound-6.17-rc1-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull more sound updates from Takashi Iwai: "For catching up the remaining stuff for 6.17: only small updates and the rest are mostly small fixes. - Fixes in HD-audio codec driver Kconfig, so that configurations can be more easily/safely carried between different versions - Fixes in ASoC SDCA, FSL xcvr, AW88399 - ASoC IMX WM8524 support - HD-audio and USB-audio quirks and fixes - A minor selftest fix" * tag 'sound-6.17-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (21 commits) ALSA: usb: scarlett2: Fix missing NULL check mips: Update HD-audio configs again LoongArch: Update HD-audio codec configs arm: Update HD-audio configs again selftests: ALSA: fix memory leak in utimer test ALSA: usb-audio: Add DSD support for Comtrue USB Audio device ALSA: hda/hdmi: Enable drivers as default ALSA: hda/cirrus: Enable drivers as default ALSA: hda/realtek: Enable drivers as default ALSA: hda/realtek - Fix mute LED for HP Victus 16-d1xxx (MB 8A26) ALSA: hda/realtek - Fix mute LED for HP Victus 16-s0xxx ALSA: hda: Fix the wrong register was used for DVC of TAS2770 ALSA: scarlett2: Add retry on -EPROTO from scarlett2_usb_tx() ALSA: hda/realtek - Fix mute LED for HP Victus 16-r1xxx ASoC: codecs: Add acpi_match_table for aw88399 driver ASoC: dt-bindings: atmel,at91-ssc: add microchip,sam9x7-ssc ASoC: imx-card: Add WM8524 support ASoC: fsl_xcvr: get channel status data with firmware exists ASoC: fsl_xcvr: get channel status data when PHY is not exists ASoC: SDCA: Add support for -cn- value properties ...
2025-08-01Merge tag 'soundwire-6.17-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire Pull soundwire updates from Vinod Koul: "A couple of small core changes and driver updates: - Core: handling of nesting irqs to outside the lock, stream parameters handing on port prep failures. - AMD driver support for ACP 7.2 platforms and improved handing of slave alerts and resume sequences - Qualcomm updating driver debug spew - Intel BPT message length limitations, rt721 codec as wake capable etc" * tag 'soundwire-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire: soundwire: amd: Add support for acp7.2 platform soundwire: stream: restore params when prepare ports fail soundwire: debugfs: move debug statement outside of error handling soundwire: amd: add check for status update registers soundwire: intel_auxdevice: add rt721 codec to wake_capable_list soundwire: Correct some property names soundwire: update Intel BPT message length limitation soundwire: intel_ace2.x: Use str_read_write() helper soundwire: amd: cancel pending slave status handling workqueue during remove sequence soundwire: amd: serialize amd manager resume sequence during pm_prepare soundwire: qcom: demote probe registration printk ASoC: cs42l43: Remove unnecessary work functions soundwire: Move handle_nested_irq outside of sdw_dev_lock MAINTAINERS: Remove Sanyog Kale as reviewer on SoundWire
2025-08-01Merge tag 'trace-v6.17' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull tracing updates from Steven Rostedt: - Deprecate auto-mounting tracefs to /sys/kernel/debug/tracing When tracefs was first introduced back in 2014, the directory /sys/kernel/tracing was added and is the designated location to mount tracefs. To keep backward compatibility, tracefs was auto-mounted in /sys/kernel/debug/tracing as well. All distros now mount tracefs on /sys/kernel/tracing. Having it seen in two different locations has lead to various issues and inconsistencies. The VFS folks have to also maintain debugfs_create_automount() for this single user. It's been over 10 years. Tooling and scripts should start replacing the debugfs location with the tracefs one. The reason tracefs was created in the first place was to allow access to the tracing facilities without the need to configure debugfs into the kernel. Using tracefs should now be more robust. A new config is created: CONFIG_TRACEFS_AUTOMOUNT_DEPRECATED which is default y, so that the kernel is still built with the automount. This config allows those that want to remove the automount from debugfs to do so. When tracefs is accessed from /sys/kernel/debug/tracing, the following printk is triggerd: pr_warn("NOTICE: Automounting of tracing to debugfs is deprecated and will be removed in 2030\n"); This gives users another 5 years to fix their scripts. - Use queue_rcu_work() instead of call_rcu() for freeing event filters The number of filters to be free can be many depending on the number of events within an event system. Freeing them from softirq context can potentially cause undesired latency. Use the RCU workqueue to free them instead. - Remove pointless memory barriers in latency code Memory barriers were added to some of the latency code a long time ago with the idea of "making them visible", but that's not what memory barriers are for. They are to synchronize access between different variables. There was no synchronization here making them pointless. - Remove "__attribute__()" from the type field of event format When LLVM is used to compile the kernel with CONFIG_DEBUG_INFO_BTF=y and PAHOLE_HAS_BTF_TAG=y, some of the format fields get expanded with the following: field:const char * filename; offset:24; size:8; signed:0; Turns into: field:const char __attribute__((btf_type_tag("user"))) * filename; offset:24; size:8; signed:0; This confuses parsers. Add code to strip these tags from the strings. - Add eprobe config option CONFIG_EPROBE_EVENTS Eprobes were added back in 5.15 but were only enabled when another probe was enabled (kprobe, fprobe, uprobe, etc). The eprobes had no config option of their own. Add one as they should be a separate entity. It's default y to keep with the old kernels but still has dependencies on TRACING and HAVE_REGS_AND_STACK_ACCESS_API. - Add eprobe documentation When eprobes were added back in 5.15 no documentation was added to describe them. This needs to be rectified. - Replace open coded cpumask_next_wrap() in move_to_next_cpu() - Have preemptirq_delay_run() use off-stack CPU mask - Remove obsolete comment about pelt_cfs event DECLARE_TRACE() appends "_tp" to trace events now, but the comment above pelt_cfs still mentioned appending it manually. - Remove EVENT_FILE_FL_SOFT_MODE flag The SOFT_MODE flag was required when the soft enabling and disabling of trace events was first introduced. But there was a bug with this approach as it only worked for a single instance. When multiple users required soft disabling and disabling the code was changed to have a ref count. The SOFT_MODE flag is now set iff the ref count is non zero. This is redundant and just reading the ref count is good enough. - Fix typo in comment * tag 'trace-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: Documentation: tracing: Add documentation about eprobes tracing: Have eprobes have their own config option tracing: Remove "__attribute__()" from the type field of event format tracing: Deprecate auto-mounting tracefs in debugfs tracing: Fix comment in trace_module_remove_events() tracing: Remove EVENT_FILE_FL_SOFT_MODE flag tracing: Remove pointless memory barriers tracing/sched: Remove obsolete comment on suffixes kernel: trace: preemptirq_delay_test: use offstack cpu mask tracing: Use queue_rcu_work() to free filters tracing: Replace opencoded cpumask_next_wrap() in move_to_next_cpu()
2025-08-01Merge tag 'trace-tools-v6.17' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull tracing tools updates from Steven Rostedt: - Introduce enum timerlat_tracing_mode Now that BPF based sampling has been added to timerlat, add an enum to represent which mode timerlat is running in - Add action on timelat threshold feature A new option, --on-threshold, is added, taking an argument that further specifies the action. Actions added in this patch are: - trace[,file=<filename>]: Saves tracefs buffer, optionally taking a filename - signal,num=<sig>,pid=<pid>: Sends signal to process. "parent" might be specified instead of number to send signal to parent process - shell,command=<command>: Execute shell command - Allow resuming tracing in timerlat bpf rtla-timerlat BPF program uses a global variable stored in a .bss section to store whether tracing has been stopped. Map it to allow it to resume tracing after it has been stopped - Add continue action to timerlat Introduce option to resume tracing after a latency threshold overflow. The option is implemented as an action named "continue" - Add action on end feature to timerlat Implement actions on end next to actions on threshold. A new option, --on-end is added, parallel to --on-threshold. Instead of being executed whenever a latency threshold is reached, it is executed at the end of the measurement - Have rtla tests check output with grep Add argument to the check command in the test suite that takes a regular expression that the output of rtla command is checked against. This allows testing for specific information in rtla output in addition to checking the return value - Add tests for timerlat actions - Update the documentation for the new features * tag 'trace-tools-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: rtla/tests: Test timerlat -P option using actions rtla/tests: Add grep checks for base test cases Documentation/rtla: Add actions feature rtla/tests: Limit duration to maximum of 10s rtla/tests: Add tests for actions rtla/tests: Check rtla output with grep rtla/timerlat: Add action on end feature rtla/timerlat: Add continue action rtla/timerlat_bpf: Allow resuming tracing rtla/timerlat: Add action on threshold feature rtla/timerlat: Introduce enum timerlat_tracing_mode
2025-08-01Merge tag 'trace-deferred-unwind-v6.17' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull initial deferred unwind infrastructure from Steven Rostedt: "This is the core infrastructure for the deferred unwinder that is required for sframes[1]. Several other patch series are based on this work although those patch series are not dependent on each other. In order to simplify the development, having this core series upstream will allow the other series to be worked on in parallel. The other series are: - The two patches to implement x86 support [2] [3] - The s390 work [4] - The perf work [5] - The ftrace work [6] - The sframe work [7] And more is on the way. The core infrastructure adds the following in kernel APIs: - int unwind_user_faultable(struct unwind_stacktrace *trace); Performs a user space stack trace that may fault user pages in. - int unwind_deferred_init(struct unwind_work *work, unwind_callback_t func); Allows a tracer to register with the unwind deferred infrastructure. - int unwind_deferred_request(struct unwind_work *work, u64 *cookie); Used when a tracer request a deferred trace. Can be called from interrupt or NMI context. - void unwind_deferred_cancel(struct unwind_work *work); Called by a tracer to unregister from the deferred unwind infrastructure. - void unwind_deferred_task_exit(struct task_struct *task); Called by task exit code to flush any pending unwind requests. - void unwind_task_init(struct task_struct *task); Called by do_fork() to initialize the task struct for the deferred unwinder. - void unwind_task_free(struct task_struct *task); Called by do_exit() to free up any resources used by the deferred unwinder. None of the above is actually compiled unless an architecture enables it, which none currently do" Link: https://sourceware.org/binutils/wiki/sframe [1] Link: https://lore.kernel.org/linux-trace-kernel/20250717004958.260781923@kernel.org/ [2] Link: https://lore.kernel.org/linux-trace-kernel/20250717004958.432327787@kernel.org/ [3] Link: https://lore.kernel.org/linux-trace-kernel/20250710163522.3195293-1-jremus@linux.ibm.com/ [4] Link: https://lore.kernel.org/linux-trace-kernel/20250718164119.089692174@kernel.org/ [5] Link: https://lore.kernel.org/linux-trace-kernel/20250424192612.505622711@goodmis.org/ [6] Link: https://lore.kernel.org/linux-trace-kernel/20250717012848.927473176@kernel.org/ [7] * tag 'trace-deferred-unwind-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: unwind: Finish up unwind when a task exits unwind deferred: Use SRCU unwind_deferred_task_work() unwind: Add USED bit to only have one conditional on way back to user space unwind deferred: Add unwind_completed mask to stop spurious callbacks unwind deferred: Use bitmask to determine which callbacks to call unwind_user/deferred: Make unwind deferral requests NMI-safe unwind_user/deferred: Add deferred unwinding interface unwind_user/deferred: Add unwind cache unwind_user/deferred: Add unwind_user_faultable() unwind_user: Add user space unwinding API with frame pointer support
2025-08-01bpf: Improve ctx access verifier error messagePaul Chaignon
We've already had two "error during ctx access conversion" warnings triggered by syzkaller. Let's improve the error message by dumping the cnt variable so that we can more easily differentiate between the different error cases. Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com> Acked-by: Eduard Zingerman <eddyz87@gmail.com> Link: https://lore.kernel.org/r/cc94316c30dd76fae4a75a664b61a2dbfe68e205.1754039605.git.paul.chaignon@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2025-08-01bpf: Check netfilter ctx accesses are alignedPaul Chaignon
Similarly to the previous patch fixing the flow_dissector ctx accesses, nf_is_valid_access also doesn't check that ctx accesses are aligned. Contrary to flow_dissector programs, netfilter programs don't have context conversion. The unaligned ctx accesses are therefore allowed by the verifier. Fixes: fd9c663b9ad6 ("bpf: minimal support for programs hooked into netfilter framework") Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com> Acked-by: Yonghong Song <yonghong.song@linux.dev> Acked-by: Eduard Zingerman <eddyz87@gmail.com> Link: https://lore.kernel.org/r/853ae9ed5edaa5196e8472ff0f1bb1cc24059214.1754039605.git.paul.chaignon@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2025-08-01bpf: Check flow_dissector ctx accesses are alignedPaul Chaignon
flow_dissector_is_valid_access doesn't check that the context access is aligned. As a consequence, an unaligned access within one of the exposed field is considered valid and later rejected by flow_dissector_convert_ctx_access when we try to convert it. The later rejection is problematic because it's reported as a verifier bug with a kernel warning and doesn't point to the right instruction in verifier logs. Fixes: d58e468b1112 ("flow_dissector: implements flow dissector BPF hook") Reported-by: syzbot+ccac90e482b2a81d74aa@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=ccac90e482b2a81d74aa Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com> Acked-by: Yonghong Song <yonghong.song@linux.dev> Acked-by: Eduard Zingerman <eddyz87@gmail.com> Link: https://lore.kernel.org/r/cc1b036be484c99be45eddf48bd78cc6f72839b1.1754039605.git.paul.chaignon@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2025-08-01x86/cpu: Add new Intel CPU model numbers for Wildcatlake and NovalakeTony Luck
Wildcatlake is a mobile CPU. Novalake has both desktop and mobile versions. [ bp: Merge into a single patch. ] Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Link: https://lore.kernel.org/20250730150437.4701-1-tony.luck@intel.com
2025-08-01spi: cs42l43: Property entry should be a null-terminated arraySimon Trimmer
The software node does not specify a count of property entries, so the array must be null-terminated. When unterminated, this can lead to a fault in the downstream cs35l56 amplifier driver, because the node parse walks off the end of the array into unknown memory. Fixes: 0ca645ab5b15 ("spi: cs42l43: Add speaker id support to the bridge configuration") Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220371 Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com> Link: https://patch.msgid.link/20250731160109.1547131-1-simont@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-08-01ASoC: Intel: sof_sdw: Add quirk for Alienware Area 51 (2025) 0CCC SKUPeter Jakubek
Add DMI quirk entry for Alienware systems with SKU "0CCC" to enable proper speaker codec configuration (SOC_SDW_CODEC_SPKR). This system requires the same audio configuration as some existing Dell systems. Without this patch, the laptop's speakers and microphone will not work. Signed-off-by: Peter Jakubek <peterjakubek@gmail.com> Link: https://patch.msgid.link/20250731172104.2009007-1-peterjakubek@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-08-01ASoC: tas2781: Fix the wrong step for TLV on tas2781Baojun Xu
The step for TLV on tas2781, should be 50 (-0.5dB). Fixes: 678f38eba1f2 ("ASoC: tas2781: Add Header file for tas2781 driver") Signed-off-by: Baojun Xu <baojun.xu@ti.com> Link: https://patch.msgid.link/20250801021618.64627-1-baojun.xu@ti.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-08-01ASoC: amd: acp: Add SoundWire SOF machine driver support for acp7.2 platformVenkata Prasad Potturu
Add SoundWire SOF machine driver support for acp7.2 platform. Signed-off-by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com> Link: https://patch.msgid.link/20250801062207.579388-5-venkataprasad.potturu@amd.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-08-01ASoC: amd: acp: Add SoundWire legacy machine driver support for acp7.2 platformVenkata Prasad Potturu
Add SoundWire legacy machine driver support for acp7.2 platform. Signed-off-by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com> Link: https://patch.msgid.link/20250801062207.579388-4-venkataprasad.potturu@amd.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-08-01ASoC: amd: ps: Add SoundWire pci and dma driver support for acp7.2 platformVenkata Prasad Potturu
Add SoundWire pci and dma driver support for acp7.2 platform. Signed-off-by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com> Link: https://patch.msgid.link/20250801062207.579388-3-venkataprasad.potturu@amd.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-08-01ASoC: SOF: amd: Add sof audio support for acp7.2 platformVenkata Prasad Potturu
Add pci revision id to support sof audio for acp7.2 platfom. Signed-off-by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com> Link: https://patch.msgid.link/20250801062207.579388-2-venkataprasad.potturu@amd.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-08-01vsock/virtio: Allocate nonlinear SKBs for handling large transmit buffersWill Deacon
When transmitting a vsock packet, virtio_transport_send_pkt_info() calls virtio_transport_alloc_linear_skb() to allocate and fill SKBs with the transmit data. Unfortunately, these are always linear allocations and can therefore result in significant pressure on kmalloc() considering that the maximum packet size (VIRTIO_VSOCK_MAX_PKT_BUF_SIZE + VIRTIO_VSOCK_SKB_HEADROOM) is a little over 64KiB, resulting in a 128KiB allocation for each packet. Rework the vsock SKB allocation so that, for sizes with page order greater than PAGE_ALLOC_COSTLY_ORDER, a nonlinear SKB is allocated instead with the packet header in the SKB and the transmit data in the fragments. Note that this affects both the vhost and virtio transports. Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Will Deacon <will@kernel.org> Message-Id: <20250717090116.11987-10-will@kernel.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2025-08-01vsock/virtio: Rename virtio_vsock_skb_rx_put()Will Deacon
In preparation for using virtio_vsock_skb_rx_put() when populating SKBs on the vsock TX path, rename virtio_vsock_skb_rx_put() to virtio_vsock_skb_put(). No functional change. Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Will Deacon <will@kernel.org> Message-Id: <20250717090116.11987-9-will@kernel.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2025-08-01vhost/vsock: Allocate nonlinear SKBs for handling large receive buffersWill Deacon
When receiving a packet from a guest, vhost_vsock_handle_tx_kick() calls vhost_vsock_alloc_linear_skb() to allocate and fill an SKB with the receive data. Unfortunately, these are always linear allocations and can therefore result in significant pressure on kmalloc() considering that the maximum packet size (VIRTIO_VSOCK_MAX_PKT_BUF_SIZE + VIRTIO_VSOCK_SKB_HEADROOM) is a little over 64KiB, resulting in a 128KiB allocation for each packet. Rework the vsock SKB allocation so that, for sizes with page order greater than PAGE_ALLOC_COSTLY_ORDER, a nonlinear SKB is allocated instead with the packet header in the SKB and the receive data in the fragments. Finally, add a debug warning if virtio_vsock_skb_rx_put() is ever called on an SKB with a non-zero length, as this would be destructive for the nonlinear case. Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Will Deacon <will@kernel.org> Message-Id: <20250717090116.11987-8-will@kernel.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2025-08-01vsock/virtio: Move SKB allocation lower-bound check to callersWill Deacon
virtio_vsock_alloc_linear_skb() checks that the requested size is at least big enough for the packet header (VIRTIO_VSOCK_SKB_HEADROOM). Of the three callers of virtio_vsock_alloc_linear_skb(), only vhost_vsock_alloc_skb() can potentially pass a packet smaller than the header size and, as it already has a check against the maximum packet size, extend its bounds checking to consider the minimum packet size and remove the check from virtio_vsock_alloc_linear_skb(). Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Will Deacon <will@kernel.org> Message-Id: <20250717090116.11987-7-will@kernel.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2025-08-01vsock/virtio: Rename virtio_vsock_alloc_skb()Will Deacon
In preparation for nonlinear allocations for large SKBs, rename virtio_vsock_alloc_skb() to virtio_vsock_alloc_linear_skb() to indicate that it returns linear SKBs unconditionally and switch all callers over to this new interface for now. No functional change. Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Will Deacon <will@kernel.org> Message-Id: <20250717090116.11987-6-will@kernel.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2025-08-01vsock/virtio: Resize receive buffers so that each SKB fits in a 4K pageWill Deacon
When allocating receive buffers for the vsock virtio RX virtqueue, an SKB is allocated with a 4140 data payload (the 44-byte packet header + VIRTIO_VSOCK_DEFAULT_RX_BUF_SIZE). Even when factoring in the SKB overhead, the resulting 8KiB allocation thanks to the rounding in kmalloc_reserve() is wasteful (~3700 unusable bytes) and results in a higher-order page allocation on systems with 4KiB pages just for the sake of a few hundred bytes of packet data. Limit the vsock virtio RX buffers to 4KiB per SKB, resulting in much better memory utilisation and removing the need to allocate higher-order pages entirely. Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Will Deacon <will@kernel.org> Message-Id: <20250717090116.11987-5-will@kernel.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2025-08-01vsock/virtio: Move length check to callers of virtio_vsock_skb_rx_put()Will Deacon
virtio_vsock_skb_rx_put() only calls skb_put() if the length in the packet header is not zero even though skb_put() handles this case gracefully. Remove the functionally redundant check from virtio_vsock_skb_rx_put() and, on the assumption that this is a worthwhile optimisation for handling credit messages, augment the existing length checks in virtio_transport_rx_work() to elide the call for zero-length payloads. Since the callers all have the length, extend virtio_vsock_skb_rx_put() to take it as an additional parameter rather than fish it back out of the packet header. Note that the vhost code already has similar logic in vhost_vsock_alloc_skb(). Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Will Deacon <will@kernel.org> Message-Id: <20250717090116.11987-4-will@kernel.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2025-08-01vsock/virtio: Validate length in packet header before skb_put()Will Deacon
When receiving a vsock packet in the guest, only the virtqueue buffer size is validated prior to virtio_vsock_skb_rx_put(). Unfortunately, virtio_vsock_skb_rx_put() uses the length from the packet header as the length argument to skb_put(), potentially resulting in SKB overflow if the host has gone wonky. Validate the length as advertised by the packet header before calling virtio_vsock_skb_rx_put(). Cc: <stable@vger.kernel.org> Fixes: 71dc9ec9ac7d ("virtio/vsock: replace virtio_vsock_pkt with sk_buff") Signed-off-by: Will Deacon <will@kernel.org> Message-Id: <20250717090116.11987-3-will@kernel.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
2025-08-01vhost/vsock: Avoid allocating arbitrarily-sized SKBsWill Deacon
vhost_vsock_alloc_skb() returns NULL for packets advertising a length larger than VIRTIO_VSOCK_MAX_PKT_BUF_SIZE in the packet header. However, this is only checked once the SKB has been allocated and, if the length in the packet header is zero, the SKB may not be freed immediately. Hoist the size check before the SKB allocation so that an iovec larger than VIRTIO_VSOCK_MAX_PKT_BUF_SIZE + the header size is rejected outright. The subsequent check on the length field in the header can then simply check that the allocated SKB is indeed large enough to hold the packet. Cc: <stable@vger.kernel.org> Fixes: 71dc9ec9ac7d ("virtio/vsock: replace virtio_vsock_pkt with sk_buff") Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Will Deacon <will@kernel.org> Message-Id: <20250717090116.11987-2-will@kernel.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2025-08-01vhost_net: basic in_order supportJason Wang
This patch introduces basic in-order support for vhost-net. By recording the number of batched buffers in an array when calling `vhost_add_used_and_signal_n()`, we can reduce the number of userspace accesses. Note that the vhost-net batching logic is kept as we still count the number of buffers there. Testing Results: With testpmd: - TX: txonly mode + vhost_net with XDP_DROP on TAP shows a 17.5% improvement, from 4.75 Mpps to 5.35 Mpps. - RX: No obvious improvements were observed. With virtio-ring in-order experimental code in the guest: - TX: pktgen in the guest + XDP_DROP on TAP shows a 19% improvement, from 5.2 Mpps to 6.2 Mpps. - RX: pktgen on TAP with vhost_net + XDP_DROP in the guest achieves a 6.1% improvement, from 3.47 Mpps to 3.61 Mpps. Acked-by: Jonah Palmer <jonah.palmer@oracle.com> Acked-by: Eugenio Pérez <eperezma@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Message-Id: <20250714084755.11921-4-jasowang@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Lei Yang <leiyang@redhat.com>
2025-08-01vhost: basic in order supportJason Wang
This patch adds basic in order support for vhost. Two optimizations are implemented in this patch: 1) Since driver uses descriptor in order, vhost can deduce the next avail ring head by counting the number of descriptors that has been used in next_avail_head. This eliminate the need to access the available ring in vhost. 2) vhost_add_used_and_singal_n() is extended to accept the number of batched buffers per used elem. While this increases the times of userspace memory access but it helps to reduce the chance of used ring access of both the driver and vhost. Vhost-net will be the first user for this. Acked-by: Jonah Palmer <jonah.palmer@oracle.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Message-Id: <20250714084755.11921-3-jasowang@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Lei Yang <leiyang@redhat.com>
generated by cgit (git 2.34.1) at 2025-09-13 16:09:37 +0000