| Age | Commit message (Collapse) | Author |
|---|
|
This requires nfs_check_verifier to take an rcu_walk flag, and requires
an rcu version of nfs_revalidate_inode which returns -ECHILD rather
than making an RPC call.
With this, nfs_lookup_revalidate can call nfs_neg_need_reval in
RCU-walk mode.
We can also move the LOOKUP_RCU check past the nfs_check_verifier()
call in nfs_lookup_revalidate.
If RCU_WALK prevents nfs_check_verifier or nfs_neg_need_reval from
doing a full check, they return a status indicating that a revalidation
is required. As this revalidation will not be possible in RCU_WALK
mode, -ECHILD will ultimately be returned, which is the desired result.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
nfs_permission makes two calls which are not always safe in RCU_WALK,
rpc_lookup_cred and nfs_do_access.
The second can easily be made rcu-safe by aborting with -ECHILD before
making the RPC call.
The former can be made rcu-safe by calling rpc_lookup_cred_nonblock()
instead.
As this will almost always succeed, we use it even when RCU_WALK
isn't being used as it still saves some spinlocks in a common case.
We only fall back to rpc_lookup_cred() if rpc_lookup_cred_nonblock()
fails and MAY_NOT_BLOCK isn't set.
This optimisation (always trying rpc_lookup_cred_nonblock()) is
particularly important when a security module is active.
In that case inode_permission() may return -ECHILD from
security_inode_permission() even though ->permission() succeeded in
RCU_WALK mode.
This leads to may_lookup() retrying inode_permission after performing
unlazy_walk(). The spinlock that rpc_lookup_cred() takes is often
more expensive than anything security_inode_permission() does, so that
spinlock becomes the main bottleneck.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
The new flag RPCAUTH_LOOKUP_RCU to credential lookup avoids locking,
does not take a reference on the returned credential, and returns
-ECHILD if a simple lookup was not possible.
The returned value can only be used within an rcu_read_lock protected
region.
The main user of this is the new rpc_lookup_cred_nonblock() which
returns a pointer to the current credential which is only rcu-safe (no
ref-count held), and might return -ECHILD if allocation was required.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
nfs_lookup_revalidate, nfs4_lookup_revalidate, and nfs_permission
all need to understand and handle RCU-walk for NFS to gain the
benefits of RCU-walk for cached information.
Currently these functions all immediately return -ECHILD
if the relevant flag (LOOKUP_RCU or MAY_NOT_BLOCK) is set.
This patch pushes those tests later in the code so that we only abort
immediately before we enter rcu-unsafe code. As subsequent patches
make that rcu-unsafe code rcu-safe, several of these new tests will
disappear.
With this patch there are several paths through the code which will no
longer return -ECHILD during an RCU-walk. However these are mostly
error paths or other uninteresting cases.
A noteworthy change in nfs_lookup_revalidate is that we don't take
(or put) the reference to ->d_parent when LOOKUP_RCU is set.
Rather we rcu_dereference ->d_parent, and check that ->d_inode
is not NULL. We also check that ->d_parent hasn't changed after
all the tests.
In nfs4_lookup_revalidate we simply avoid testing LOOKUP_RCU on the
path that only calls nfs_lookup_revalidate() as that function
already performs the required test.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
nfs4_lookup_revalidate only uses 'parent' to get 'dir', and only
uses 'dir' if 'inode == NULL'.
So we don't need to find out what 'parent' or 'dir' is until we
know that 'inode' is NULL.
By moving 'dget_parent' inside the 'if', we can reduce the number of
call sites for 'dput(parent)'.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
There is a couple of places in client code where returned value
of try_module_get() is ignored. As a result there is a small chance
to premature unload module because of unbalanced refcounting.
The patch adds error handling in that places.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
Signed-off-by: Weston Andros Adamson <dros@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
This is useful when lsegs need to be released while holding locks.
Signed-off-by: Weston Andros Adamson <dros@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
nfs_page_find_head_request_locked looks through the regular nfs commit lists
when the page is swapped out, but doesn't look through the pnfs commit lists.
I'm not sure if anyone has hit any issues caused by this.
Suggested-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Weston Andros Adamson <dros@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
Fix the comment in nfs_page.h for PG_INODE_REF to reflect that it's no longer
set only on head requests. Also add a WARN_ON_ONCE in nfs_inode_remove_request
as PG_INODE_REF should always be set.
Suggested-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Weston Andros Adamson <dros@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
Return errors from wait_on_bit_lock from nfs_page_group_lock.
Add a bool argument @wait to nfs_page_group_lock. If true, loop over
wait_on_bit_lock until it returns cleanly. If false, return the error
from wait_on_bit_lock.
Signed-off-by: Weston Andros Adamson <dros@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
It's always 0.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
Fix the endianness handling in gss_wrap_kerberos_v1 and drop the memset
call there in favor of setting the filler bytes directly.
In gss_wrap_kerberos_v2, get rid of the "ec" variable which is always
zero, and drop the endianness conversion of 0. Sparse handles 0 as a
special case, so it's not necessary.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
Use u16 pointer in setup_token and setup_token_v2. None of the fields
are actually handled as __be16, so this simplifies the code a bit. Also
get rid of some unneeded pointer increments.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
The handling of the gc_ctx pointer only seems to be partially RCU-safe.
The assignment and freeing are done using RCU, but many places in the
code seem to dereference that pointer without proper RCU safeguards.
Fix them to use rcu_dereference and to rcu_read_lock/unlock, and to
properly handle the case where the pointer is NULL.
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
Commit 5b22216e11f7 (nfs: __rcu annotations) added a __rcu annotation to
the gc_gss_ctx field. I see no rationale for adding that though, as that
field does not seem to be managed via RCU at all.
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
If you have an NFSv4 mounted directory which does not container 'foo'
and:
ls -l foo
ssh $server touch foo
cat foo
then the 'cat' will fail (usually, depending a bit on the various
cache ages). This is correct as negative looks are cached by default.
However with the same initial conditions:
cat foo
ssh $server touch foo
cat foo
will usually succeed. This is because an "open" does not add a
negative dentry to the dcache, while a "lookup" does.
This can have negative performance effects. When "gcc" searches for
an include file, it will try to "open" the file in every director in
the search path. Without caching of negative "open" results, this
generates much more traffic to the server than it should (or than
NFSv3 does).
The root of the problem is that _nfs4_open_and_get_state() will call
d_add_unique() on a positive result, but not on a negative result.
Compare with nfs_lookup() which calls d_materialise_unique on both
a positive result and on ENOENT.
This patch adds a call d_add() in the ENOENT case for
_nfs4_open_and_get_state() and also calls nfs_set_verifier().
With it, many fewer "open" requests for known-non-existent files are
sent to the server.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
There was a check for result being not NULL. But get_acl() may return
NULL, or ERR_PTR, or actual pointer.
The purpose of the function where current change is done is to "list
ACLs only when they are available", so any error condition of get_acl()
mustn't be elevated, and returning 0 there is still valid.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=81111
Signed-off-by: Andrey Utkin <andrey.krieger.utkin@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Fixes: 74adf83f5d77 (nfs: only show Posix ACLs in listxattr if actually...)
Cc: stable@vger.kernel.org # 3.14+
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
into linux-next
* 'nfs-rdma' of git://git.linux-nfs.org/projects/anna/nfs-rdma: (916 commits)
xprtrdma: Handle additional connection events
xprtrdma: Remove RPCRDMA_PERSISTENT_REGISTRATION macro
xprtrdma: Make rpcrdma_ep_disconnect() return void
xprtrdma: Schedule reply tasklet once per upcall
xprtrdma: Allocate each struct rpcrdma_mw separately
xprtrdma: Rename frmr_wr
xprtrdma: Disable completions for LOCAL_INV Work Requests
xprtrdma: Disable completions for FAST_REG_MR Work Requests
xprtrdma: Don't post a LOCAL_INV in rpcrdma_register_frmr_external()
xprtrdma: Reset FRMRs after a flushed LOCAL_INV Work Request
xprtrdma: Reset FRMRs when FAST_REG_MR is flushed by a disconnect
xprtrdma: Properly handle exhaustion of the rb_mws list
xprtrdma: Chain together all MWs in same buffer pool
xprtrdma: Back off rkey when FAST_REG_MR fails
xprtrdma: Unclutter struct rpcrdma_mr_seg
xprtrdma: Don't invalidate FRMRs if registration fails
xprtrdma: On disconnect, don't ignore pending CQEs
xprtrdma: Update rkeys after transport reconnect
xprtrdma: Limit data payload size for ALLPHYSICAL
xprtrdma: Protect ia->ri_id when unmapping/invalidating MRs
...
|
|
This may be used to limit the number of cached credentials building up
inside the access cache.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
In some cases where the credentials are not often reused, we may want
to limit their total number just in order to make the negative lookups
in the hash table more manageable.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
This patch is to fix following error while compiling OF selftests.
"drivers/of/selftest.c:617:2: error: implicit declaration of function
'of_fdt_unflatten_tree'"
Now, CONFIG_OF_SELFTEST depends on CONFIG_OF_EARLY_FLATTREE so that the
broken configuration cannot be selected. Ultimately it would be a good
idea to allow CONFIG_OF_SELFTEST to select CONFIG_OF_EARLY_FLATTREE, but
there is a dependency problem on i386 and x86_64 that causes dtc to not
get built and causes the build to fail. That problem needs to be fixed
first.
Signed-off-by: Gaurav Minocha <gaurav.minocha.os@gmail.com>
Signed-off-by: Grant Likely <grant.likely@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Thomas Gleixner:
"Two fixes in the timer area:
- a long-standing lock inversion due to a printk
- suspend-related hrtimer corruption in sched_clock"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timer: Fix lock inversion between hrtimer_bases.lock and scheduler locks
sched_clock: Avoid corrupting hrtimer tree during suspend
|
|
Need to export x509_request_asymmetric_key() so that PKCS#7 can use it if
compiled as a module.
Reported-by: James Morris <jmorris@namei.org>
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
The patch puts repeated code sequence into one function, removes verbose
comments and decreases log verbosity.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
There is no gain in passing id by pointer to be filled.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
In case of error callback prints already corresponding message.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
The patch simplifies ipp_find_obj and removes debug messages.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
Argument checks are redundant, clients always check ippdrv before calling
these functions.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
The only thing function should check is if there are buffers in respective
queues.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
list_first_entry does not return NULL on empty list so this check
does not make sense. Moreover there is already code which prevents calling
list_first_entry on empty lists.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
There is no reason to allocate intermediate variable.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
exynos_drm_gem_get_dma_addr returns dma_addr_t, type casting to void* and
back is not necessary.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
struct exynos_drm_ipp_private contains only one pointer so all occurrences
of the struct can be replaced by the pointer itself.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
The patch removes unused event_list field from struct exynos_drm_ipp_private.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
The patch replaces type casting with proper pointer.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
This patch adds common part of dsi node.
Signed-off-by: YoungJun Cho <yj44.cho@samsung.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
This patch adds mipi-phy node for MIPI DSI device.
Signed-off-by: YoungJun Cho <yj44.cho@samsung.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
This patch adds sysreg property to fimd device node
which is required to use I80 interface.
Signed-off-by: YoungJun Cho <yj44.cho@samsung.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
This patch adds sysreg property to fimd device node
which is required to use I80 interface.
Signed-off-by: YoungJun Cho <yj44.cho@samsung.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
The offset of register DSIM_PLLTMR_REG in Exynos5410 / 5420 / 5440
SoCs is different from the one in Exynos4 SoCs.
In case of Exynos5410 / 5420 / 5440 SoCs, there is no frequency
band bit in DSIM_PLLCTRL_REG, and it uses DSIM_PHYCTRL_REG and
DSIM_PHYTIMING*_REG instead.
So this patch adds driver data to distinguish it.
Signed-off-by: YoungJun Cho <yj44.cho@samsung.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
This patch adds relevant to exynos5410 compatible
for exynos5410 / 5420 / 5440 SoCs support.
Signed-off-by: YoungJun Cho <yj44.cho@samsung.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
To support MIPI command mode based I80 interface panel,
FIMD should do followings:
- Sets LCD I80 interface timings configuration.
- Uses "lcd_sys" as an IRQ resource and sets relevant IRQ configuration.
- Sets LCD block configuration for I80 interface.
- Sets ideal(pixel) clock is 2 times faster than the original one
to generate frame done IRQ prior to the next TE signal.
- Implements trigger feature that transfers image data if there is page
flip request, and implements TE handler to call trigger function.
Signed-off-by: YoungJun Cho <yj44.cho@samsung.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
This is a temporary solution and should be made by more
generic way.
To support LCD I80 interface, the DSI host should register
TE interrupt handler from the TE GPIO of attached panel.
So the panel generates a tearing effect synchronization signal
then the DSI host calls the CRTC device manager to trigger
to transfer video image.
Signed-off-by: YoungJun Cho <yj44.cho@samsung.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
To support LCD I80 interface, the panel should generate
Tearing Effect synchronization signal between MCU and FB
to display video images.
And the display controller should trigger to transfer
video image at this signal.
So the panel receives the TE IRQ, then calls these handler
chains to notify it to the display controller.
Signed-off-by: YoungJun Cho <yj44.cho@samsung.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
In case of using MIPI DSI based I80 interface panel,
the relevant registers should be set.
So this patch adds relevant DT bindings.
Signed-off-by: YoungJun Cho <yj44.cho@samsung.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
There could be the case that the page flip operation isn't finished correctly
with some abnormal condition such as panel reset. So this patch replaces
wait_event() with wait_event_timeout() to avoid waiting for page flip completion
infinitely.
And clears exynos_crtc->pending_flip in exynos_drm_crtc_page_flip()
when exynos_drm_crtc_mode_set_commit() is failed.
Signed-off-by: YoungJun Cho <yj44.cho@samsung.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
This configuration could be used in MIPI DSI command mode also.
And adds user manual description for display configuration.
Signed-off-by: YoungJun Cho <yj44.cho@samsung.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
Configuration sets for Exynos 4210 and 4x12 SoC were already defined in
Exynos HDMI and Mixed drivers, but they lacked proper linking to device
tree 'compatible' values. This patch fixes this issue adding support for
following compatible values: samsung,exynos4210-mixer,
samsung,exynos4212-mixer and samsung,exynos4210-hdmi. It also corrects
access to sclk_mixer clock, which is available only on Exynos 4210.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
