summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-02-20drm/amdgpu: implement amdgpu_gem_map_(attach/detach)Christian König
Instead of the pin/unpin callback implement the attach/detach ones. Functional identical, but allows us access to the attachment. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-02-20drm/i915/fbc: Use PLANE_HAS_FENCE to determine if the plane is fencedChris Wilson
Rather than trusting the cached value of plane_state->vma->fence to imply whether the plane_state itself holds a reference on the framebuffer's fence, use the information provided in the plane_state->flags (PLANE_HAS_FENCE). Note that we still assume that FBC is entirely bounded by the plane_state active life span; it's not clear if that is a safe assumption. Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180220134208.24988-4-chris@chris-wilson.co.uk
2018-02-20drm/i915/fbdev: Use the PLANE_HAS_FENCE flags from the time of pinningChris Wilson
Use the information about the fence state from the time of pinning to determine if the fbdev writes are going through a fence. This avoids any confusion in cases where the fence may appear or disappear unconnected to the use by fbdev. Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180220134208.24988-3-chris@chris-wilson.co.uk
2018-02-20drm/i915: Move the policy for placement of the GGTT vma into the callerChris Wilson
Currently we make the unilateral decision inside i915_gem_object_pin_to_display() where the VMA should resided (inside the fence and mappable region or above?). This is not our decision to make as it impacts on how the display engine can use the resulting scanout object, and it would rather instruct us where to place the VMA so that it can enable the features it wants. As such, make the pin flags an argument to i915_gem_object_pin_to_display() and control them from intel_pin_and_fence_fb_obj() Whilst taking control of the mapping for ourselves, start tracking how we use it to avoid trying to free a fence we never claimed: <3>[ 227.151869] GEM_BUG_ON(vma->fence->pin_count <= 0) <4>[ 227.152064] ------------[ cut here ]------------ <2>[ 227.152068] kernel BUG at drivers/gpu/drm/i915/i915_vma.h:391! <4>[ 227.152084] invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI <0>[ 227.152092] Dumping ftrace buffer: <0>[ 227.152099] (ftrace buffer empty) <4>[ 227.152102] Modules linked in: i915 snd_hda_codec_analog snd_hda_codec_generic coretemp snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm lpc_ich e1000e mei_me mei prime_numbers <4>[ 227.152131] CPU: 1 PID: 1587 Comm: kworker/u16:49 Tainted: G U 4.16.0-rc1-gbab67b2f6177-kasan_7+ #1 <4>[ 227.152134] Hardware name: Dell Inc. OptiPlex 755 /0PU052, BIOS A08 02/19/2008 <4>[ 227.152236] Workqueue: events_unbound intel_atomic_commit_work [i915] <4>[ 227.152292] RIP: 0010:intel_unpin_fb_vma+0x23a/0x2a0 [i915] <4>[ 227.152295] RSP: 0018:ffff88005aad7b68 EFLAGS: 00010286 <4>[ 227.152300] RAX: 0000000000000026 RBX: ffff88005c359580 RCX: 0000000000000000 <4>[ 227.152304] RDX: 0000000000000026 RSI: ffffffff8707d840 RDI: ffffed000b55af63 <4>[ 227.152307] RBP: ffff880056817e58 R08: 0000000000000001 R09: 0000000000000000 <4>[ 227.152311] R10: ffff88005aad7b88 R11: 0000000000000000 R12: ffff8800568184d0 <4>[ 227.152314] R13: ffff880065b5ab08 R14: 0000000000000000 R15: dffffc0000000000 <4>[ 227.152318] FS: 0000000000000000(0000) GS:ffff88006ac40000(0000) knlGS:0000000000000000 <4>[ 227.152322] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 <4>[ 227.152325] CR2: 00007f5fb25550a8 CR3: 0000000068c78000 CR4: 00000000000006e0 <4>[ 227.152328] Call Trace: <4>[ 227.152385] intel_cleanup_plane_fb+0x6b/0xd0 [i915] <4>[ 227.152395] drm_atomic_helper_cleanup_planes+0x166/0x280 <4>[ 227.152452] intel_atomic_commit_tail+0x159d/0x3380 [i915] <4>[ 227.152463] ? process_one_work+0x66e/0x1460 <4>[ 227.152516] ? skl_update_crtcs+0x9c0/0x9c0 [i915] <4>[ 227.152523] ? lock_acquire+0x13d/0x390 <4>[ 227.152527] ? lock_acquire+0x13d/0x390 <4>[ 227.152534] process_one_work+0x71a/0x1460 <4>[ 227.152540] ? __schedule+0x815/0x1e20 <4>[ 227.152547] ? pwq_dec_nr_in_flight+0x2b0/0x2b0 <4>[ 227.152553] ? _raw_spin_lock_irq+0xa/0x40 <4>[ 227.152559] worker_thread+0xdf/0xf60 <4>[ 227.152569] ? process_one_work+0x1460/0x1460 <4>[ 227.152573] kthread+0x2cf/0x3c0 <4>[ 227.152578] ? _kthread_create_on_node+0xa0/0xa0 <4>[ 227.152583] ret_from_fork+0x3a/0x50 <4>[ 227.152591] Code: c6 00 11 86 c0 48 c7 c7 e0 bd 85 c0 e8 60 e7 a9 c4 0f ff e9 1f fe ff ff 48 c7 c6 40 10 86 c0 48 c7 c7 e0 ca 85 c0 e8 2b 95 bd c4 <0f> 0b 48 89 ef e8 4c 44 e8 c4 e9 ef fd ff ff e8 42 44 e8 c4 e9 <1>[ 227.152720] RIP: intel_unpin_fb_vma+0x23a/0x2a0 [i915] RSP: ffff88005aad7b68 v2: i915_vma_pin_fence() is a no-op if a fence isn't required, so check vma->fence as well. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180220134208.24988-2-chris@chris-wilson.co.uk
2018-02-20drm/i915: Also check view->type for a normal GGTT viewChris Wilson
We cannot simply use !view as shorthand for all normal GGTT views as a few callers will always populate a i915_ggtt_view struct and set the type to NORMAL instead. So check for (!view || view->type == NORMAL) inside i915_gem_object_ggtt_pin(). Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180220134208.24988-1-chris@chris-wilson.co.uk
2018-02-20drm/i915: Drop WaDoubleCursorLP3Latency:ivbVille Syrjälä
WaDoubleCursorLP3Latency was meant for pre-production hardware. Drop it. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180130203807.13721-6-ville.syrjala@linux.intel.com Reviewed-by: Mika Kahola <mika.kahola@intel.com>
2018-02-20drm/i915: Set the primary plane pipe select bits on gen4Ville Syrjälä
i965 and g4x still have the pipe select bits in the plane control registers, they're just hardcoded to select a specific pipe. However plane C on i965 can still move between the pipes, thus we should program the pipe select bits on i965 if we want to expose plane C some day. Since there is no harm in programming the bits on any plane on i965/g4x let's just always set them. This will also make our pre-computed register value match what the hardware register would read, should we want to cross check the two. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180130203807.13721-2-ville.syrjala@linux.intel.com Reviewed-by: Mika Kahola <mika.kahola@intel.com>
2018-02-20drm/i915: Don't set cursor pipe select bits on g4x+Ville Syrjälä
G4x cursor control registers still allow us to write to the pipe select bits even though cursors are supposed to be fixed to a specific pipe. Bspec tells us that we should only ever write 0 to these bits. Let's follow that recommendation. On ilk+ the bits become hardwired to 0. Also looks like ICL repurposes these bits for some other use, so we had better stop setting them to bogus values there. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180130203807.13721-1-ville.syrjala@linux.intel.com Reviewed-by: Mika Kahola <mika.kahola@intel.com>
2018-02-20drm/i915: Assert that we don't overflow frontbuffer tracking bitsVille Syrjälä
Add some compile time assrts to the frontbuffer tracking to make sure that we have enough bits per pipe to cover all the planes, and that we have enough total bits to cover all the planes across all pipes. We'll ignore any potential clash between the overlay bit and the plane bits because that will allow us to keep using a total of 32 bits for the foreseeable future. While at it change the macros to use BIT() and GENMASK(). The latter gets rid of the hardcoded 0xff and thus means we can change the number of bits per pipe by just changing INTEL_FRONTBUFFER_BITS_PER_PIPE. Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180124183642.32549-1-ville.syrjala@linux.intel.com Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
2018-02-20drm/mm: Fix caching of leftmost node in the interval treeChris Wilson
When we descend the tree to find our slot, if we step to the right, we are no longer the leftmost node. Fixes: f808c13fd373 ("lib/interval_tree: fast overlap detection") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Christian König <christian.koenig@amd.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Acked-by: Christian König <christian.koenig@amd.com> for now. Link: https://patchwork.freedesktop.org/patch/msgid/20180220093738.1461-1-chris@chris-wilson.co.uk
2018-02-20drm/omapdrm: Use of_find_backlight helperMeghana Madhyastha
Replace of_find_backlight_by_node and of the code around it with of_find_backlight helper to avoid repetition of code. Reviewed-by: Noralf Trønnes <noralf@tronnes.org> Signed-off-by: Meghana Madhyastha <meghana.madhyastha@gmail.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/eb914313f9d0e58d81572ccd3c718a573a891bd7.1516810726.git.meghana.madhyastha@gmail.com
2018-02-20drm/panel: Use of_find_backlight helperMeghana Madhyastha
Replace of_find_backlight_by_node and of the code around it with of_find_backlight helper to avoid repetition of code. Reviewed-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Sean Paul <seanpaul@chromium.org> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Meghana Madhyastha <meghana.madhyastha@gmail.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/140d01afb138d687680b2d1776a4c101c9fa9a0a.1516810725.git.meghana.madhyastha@gmail.com
2018-02-20drm/omapdrm: Use backlight_enable/disable helpersMeghana Madhyastha
Use backlight_enable/disable helpers instead of changing the property and calling backlight_update_status for cleaner and simpler code and also to avoid repetitions. Reviewed-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Meghana Madhyastha <meghana.madhyastha@gmail.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/30d5b26c3c7d75de3d2ab3cff9dee67084fc3caf.1516810725.git.meghana.madhyastha@gmail.com
2018-02-20drm/panel: Use backlight_enable/disable helpersMeghana Madhyastha
Use backlight_enable/disable helpers instead of changing the property and calling backlight_update_status for cleaner and simpler code and also to avoid repetitions. Reviewed-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Sean Paul <seanpaul@chromium.org> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Meghana Madhyastha <meghana.madhyastha@gmail.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/bc80cdb5cf1a6638dce9fb9f8da674e361e3b749.1516810725.git.meghana.madhyastha@gmail.com
2018-02-20drm/tinydrm: Call devres version of of_find_backlightMeghana Madhyastha
Call devm_of_find_backlight (the devres version) instead of of_find_backlight. Reviewed-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Meghana Madhyastha <meghana.madhyastha@gmail.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/244cd4d567cb3944a8cb7633715ffc8ac4e1ce83.1516810725.git.meghana.madhyastha@gmail.com
2018-02-20drm/tinydrm: Replace tinydrm_of_find_backlight with of_find_backlightMeghana Madhyastha
Remove tinydrm_of_find_backlight from tinydrm-helpers.c. We now have a generic of_find_backlight defined in backlight.c. Let the callers of tinydrm_of_find_backlight call of_find_backlight. Also, remove select BACKLIGHT_LCD_SUPPORT and select BACKLIGHT_CLASS_DEVICE from tinydrm/Kconfig as it is a hack that is no longer needed. Reviewed-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Meghana Madhyastha <meghana.madhyastha@gmail.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/11dd1cabd098a730d07ab04c5987b139d14d8b21.1516810725.git.meghana.madhyastha@gmail.com
2018-02-20drm/tinydrm: Convert tinydrm_enable/disable_backlight to ↵Meghana Madhyastha
backlight_enable/disable Remove tinydrm_enable/disable_backlight and let the callers call the more generic backlight_enable/disable helpers Reviewed-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Meghana Madhyastha <meghana.madhyastha@gmail.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/ec700724e47814e6426966e093bd32b2364ba147.1516810725.git.meghana.madhyastha@gmail.com
2018-02-20drm/msm/dsi: Get byte_intf_clk only for versions that need itArchit Taneja
Newer DSI host controllers (SDM845 in particular) require a new clock called byte_intf_clk. A recent patch tried to add this as an optional clock, but it still set 'ret' to an error number if it didn't find it. This breaks the host's probe for all previous DSI host versions. Instead of setting this up as an optional clock, try to get the clock only for the DSI version that supports it. Fixes: 56558fb ("drm/msm/dsi: Add byte_intf_clk") Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-02-20drm/msm/adreno: Use generic function to load firmware to a buffer objectJordan Crouse
Move a5xx specific code to load firmware into a buffer object to the generic Adreno code. This will come in useful for future targets. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-02-20drm/msm/adreno: Define a list of firmware files to load per targetJordan Crouse
The number and type of firmware files required differs for each target. Instead of using a fixed struct member for each possible firmware file use a generic list of files that should be loaded on boot. Use some semi-target specific enums to help each target find the appropriate firmware(s) that it needs to load. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-02-20drm/msm/adreno: Rename gpmufw to powerfwJordan Crouse
The power management device on the a5xx cores is known as the GPMU (Graphics Power Management Unit). On a6xx cores the device was expanded and renamed as the GMU (Graphics Management Unit). Rename the 'gpmufw' name struct adreno_info as 'powerfw' to avoid confusion. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-02-20drm/msm: Pass the correct aperture end to drm_mm_initJordan Crouse
drm_mm_init() takes the start and length of the intended virtual memory address region but the msm code is passing the end of the region instead. That would work out if the region started at 0 but it doesn't so the top of the region sneaks above the 32 bit boundary which won't work because the driver doesn't support 64 bit addresses for the GPU yet. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-02-20drm/msm/gpu: Set number of clocks to 0 if the list allocation failsJordan Crouse
If we fail to allocate gpu->grp_clks reset the number of available clocks to zero to avoid referencing the missing array later. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-02-20drm/msm: Replace gem_object deprecated functionsSteve Kowalik
drm_gem_object_{reference,unreference,unreference_unlocked} are deprecated functions, and merely alias to the get/put functions. Switch to the new names. Signed-off-by: Steve Kowalik <steven@wedontsleep.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-02-20drm/msm/hdmi: fix semicolon.cocci warningsFengguang Wu
Remove unneeded semicolon. Generated by: scripts/coccinelle/misc/semicolon.cocci CC: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-02-20drm/msm/mdp5: Fix trailing semicolonLuis de Bethencourt
The trailing semicolon is an empty statement that does no operation. Removing it since it doesn't do anything. Signed-off-by: Luis de Bethencourt <luisbg@kernel.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-02-20dt-bindings: display: msm/dsi: Add updates for SDM845Archit Taneja
SDM845 uses a newer revision (v2.0+) of the 6G DSI controller. This revision has another clock input at the block boundary called the byte interface clock. Specify this new clock in the binding. A 10nm DSI PHY is used along with the controller. Add a compatible string for it and specify its base address/regulator supply needs. Cc: Rob Herring <robh@kernel.org> Cc: devicetree@vger.kernel.org Signed-off-by: Archit Taneja <architt@codeaurora.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-02-20dt-bindings: display: msm/dsi: Add compatible for 14nm DSI PHYArchit Taneja
Add the compatible string for 14nm DSI PHY (used in MSM8996/APQ8096). >From 14nm PHY onwards, the "dsi_phy_regulator" reg-name is not required, but "dsi_phy_lane" reg-name is. Update the doc to specify the reg-names each PHY revision needs. Cc: Rob Herring <robh@kernel.org> Cc: devicetree@vger.kernel.org Signed-off-by: Archit Taneja <architt@codeaurora.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-02-20dt-bindings: display: msm/dsi: Fix the PHY regulator supply propsArchit Taneja
The PHY regulator supply names vary across different PHY versions. Mention explicitly which PHYs require which supplies. Cc: Rob Herring <robh@kernel.org> Cc: devicetree@vger.kernel.org Signed-off-by: Archit Taneja <architt@codeaurora.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-02-20dt-bindings: display: msm/dsi: Remove unused propertiesArchit Taneja
"qcom,dsi-host-index" and "qcom,dsi-phy-index" DT props aren't acceptable and have never been used in any DT files. Remove them. Cc: Rob Herring <robh@kernel.org> Cc: devicetree@vger.kernel.org Signed-off-by: Archit Taneja <architt@codeaurora.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-02-20drm/msm/dsi: Add byte_intf_clkArchit Taneja
DSI6G v2.0+ blocks have a new clock input to them called byte_intf_clk. It's rate is to be set as byte_clk / 2. Within the clock controller (CC) subsystem, this clock is a child/descendant of the byte_clk. Set it up as an optional clock in the DSI host driver. Make sure that we enable/set its rate only after we configure byte_clk. This is required for the ancestor clocks in the CC to be configured correctly. Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-02-20drm/msm/dsi: Add SDM845 in dsi_cfgArchit Taneja
SDM845 contains 2 DSI6G v2.2.1 host controllers. Add them in dsi_cfg. Cc: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-02-20drm/msm/dsi: Use msm_clk_get in dsi_get_configArchit Taneja
We try to get the interface clock in dsi_get_config early during DSI's component bind. Try getting both the "iface" and "iface_clk" clock name variants so that we are compatible with both new and legacy DT. Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-02-20drm/msm/dsi: Populate the 10nm PHY funcsArchit Taneja
Populate the PHY ops with the downstream driver as reference. There are a couple of TODOs which need to be resolved: - The PHY timings are all hardcoded for now. This needs to be replaced with automatic calculations once we get/understand them. - There are some lane configuration registers which use a new representation between physical and logical lane mappings. For now, we've hardcoced them to follow the default mapping (i.e logical 0 -> phy 0, logical 1 -> phy 1 etc). Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-02-20drm/msm/dsi: Populate PLL 10nm clock opsArchit Taneja
Populate PLL clock ops from downstream. This contains the VCO PLL ops and the registration of standard clk_divider and clk_mux clocks. Unlike 14nm PLL, the postdividers/mux of the slave PLL doesn't need to be set to the same values of the postdivs/mux of the master PLL. Hence, we don't need special postdivider clock ops like we did with the 14nm PLL driver. Like the previous PLL drivers, the implementation is slightly different from downstream. We don't use shadow clocks, but have the ability to reparent the RCGs to a different source. Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-02-20drm/msm/dsi: Add skeleton 10nm PHY/PLL codeArchit Taneja
Add new 10nm DSI PLL/PHY files that will be used on SDM845. Just populate empty pll/phy funcs for now. These will be filled up later. Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-02-20drm/msm/dsi: Update generated headers for 10nm PLL/PHYArchit Taneja
Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-02-20drm/msm: add sudo flag to submit ioctlRob Clark
This flags cause cmdstream to be executed from the ringbuffer (RB) instead of IB1. Normally not something you'd ever want to do, but it is super useful for firmware debugging. Hidden behind CAP_SYS_RAWIO and a default=n kconfig option which depends on EXPERT (and has a suitably scary warning), to prevent it from being used on accident. Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-02-20drm/msm: add a5xx specific debugfsRob Clark
Add some debugfs to dump out PFP and ME microcontroller state, as well as some of the queues (MEQ and ROQ). Also add a debugfs file to trigger a GPU reset (and reloading the firmware on next submit). Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-02-20drm/msm/dsi: check msm_dsi and dsi pointers before useLloyd Atkinson
Move null checks of pointer arguments to the beginning of the modeset init function since they are referenced immediately instead of after they have already been used. Signed-off-by: Lloyd Atkinson <latkinso@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-02-20drm/msm/dsi: correct DSI id bounds check during registrationLloyd Atkinson
Check DSI instance id argument against the proper boundary size to protect against invalid configuration of the DSI id. Signed-off-by: Lloyd Atkinson <latkinso@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-02-20drm/msm/dsi: check for failure on retrieving pll in dsi managerLloyd Atkinson
Make msm_dsi_pll_init consistently return an error code instead of NULL when pll initialization fails so that later pll retrieval can check against an error code. Add checks for these failures after retrieval of src_pll to avoid invalid pointer dereferences later in msm_dsi_pll_get_clk_provider. Signed-off-by: Lloyd Atkinson <latkinso@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-02-20Merge tag 'topic/backlight_for_lag-2018-01-29' of ↵Sean Paul
git://anongit.freedesktop.org/drm/drm-misc into drm-misc-next This contains the backlight portion of Meghana Madhyastha's patch set to migrate the backlight helpers from tinydrm to the backlight subsystem. https://patchwork.freedesktop.org/series/36522/ Cc: Meghana Madhyastha <meghana.madhyastha@gmail.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> # gpg: Signature made Mon 29 Jan 2018 02:25:40 PM EST # gpg: using RSA key 7F17297CC4A076740CB3E42A96F70DFDA84A070A # gpg: Good signature from "Sean Paul <seanpaul@chromium.org>" [unknown] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 1C5E AB9E D7C9 DDE9 E7F2 087C 732C 0025 72DC AF79 # Subkey fingerprint: 7F17 297C C4A0 7674 0CB3 E42A 96F7 0DFD A84A 070A Link: https://patchwork.freedesktop.org/patch/msgid/20180129192950.bvmhkz3h42t5a25r@art_vandelay
2018-02-20drm: add documentation for tv connector state marginsJani Nikula
A bit boring documentation fix, but gets rid of the warnings: ./include/drm/drm_connector.h:370: warning: Function parameter or member 'margins.left' not described in 'drm_tv_connector_state' ./include/drm/drm_connector.h:370: warning: Function parameter or member 'margins.right' not described in 'drm_tv_connector_state' ./include/drm/drm_connector.h:370: warning: Function parameter or member 'margins.top' not described in 'drm_tv_connector_state' ./include/drm/drm_connector.h:370: warning: Function parameter or member 'margins.bottom' not described in 'drm_tv_connector_state' [Depends on fe7bc493d979 ("scripts: kernel-doc: support in-line comments on nested structs/unions") in docs-next to actually fix the warnings.] Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180219104009.4887-1-jani.nikula@intel.com
2018-02-20drm/doc: Use new substruct supportDaniel Vetter
Support for this just recently landed in linux-next. Reviewed-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180219225356.24996-5-daniel.vetter@ffwll.ch
2018-02-20drm/doc: Polish for drm_mode_parse_command_line_for_connectorDaniel Vetter
Quoting the module option format looks soo much nicer, and avoids sphinx spewing errors about markup issues. v2: Fix typo in commit message (Thierry). Reviewed-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180219225356.24996-4-daniel.vetter@ffwll.ch
2018-02-20drm/docs: Document "scaling mode" property betterDaniel Vetter
Move it out of the csv dungeon. While at it add the missing link to the helper functions for setting up the "panel rotation" property. Also OCD how we list enum property values and their corresponding docs. Going for a nest definition list seams cleanest, no need for also making it an uordered list. Cc: Sean Paul <seanpaul@chromium.org> Cc: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180219225356.24996-3-daniel.vetter@ffwll.ch
2018-02-20drm/docs: Align layout of optional plane blending propertiesDaniel Vetter
Just a bit of drive-by OCD. All the other property docs use enumerations, for some nice visual consistency. It also neatly highlights the property name. Reviewed-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20180219225356.24996-2-daniel.vetter@ffwll.ch
2018-02-20drm/docs: Discourage adding more to kms-properties.csvDaniel Vetter
Motivated by patch review. The table is really hard to read in source form, hard to edit, and we've moved away to more focused sections about specific features and how they're exposed in properties. Those sections can then more easily enumerate options, link to helper functions and other parts of the docs. All things that get ugly real fast in the docs. Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180219225356.24996-1-daniel.vetter@ffwll.ch
2018-02-20drm/i915: Track number of pending freed objectsChris Wilson
During igt, we frequently call into the driver to reset both HW and driver state (idling the device, waiting for it to become idle and freeing off old objects) to ensure that we start each test/subtest/pass from known state. This process incurs an RCU barrier or two to ensure that any such pending frees are indeed flushed before we return. However, unconditionally waiting on the RCU barrier adds needless delay to many callers, which adds up to several seconds when repeated thousands of times. We can skip the rcu_barrier() if by tracking how many outstanding frees we have, we know there are none. The same path is used along suspend, where we may be able to save the unconditional RCU barrier. To put it into perspective with a completely meaningless microbenchmark, igt/gem_sync/idle is improved from 50ms to 30us on bdw. v2: Remove the extra synchronize_rcu() inside i915_drop_caches_set() Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180219220631.25001-1-chris@chris-wilson.co.uk
generated by cgit (git 2.34.1) at 2025-09-23 17:35:56 +0000