| Age | Commit message (Collapse) | Author |
|---|
|
yangyun reported that libfuse test test_copy_file_range() copies zero
bytes from a newly written file when fuse passthrough is enabled.
The reason is that extending passthrough write is not updating the fuse
inode size and when vfs_copy_file_range() observes a zero size inode,
it returns without calling the filesystem copy_file_range() method.
Fix this by adjusting the fuse inode size after an extending passthrough
write.
This does not provide cache coherency of fuse inode attributes and
backing inode attributes, but it should prevent situations where fuse
inode size is too small, causing read/copy to be wrongly shortened.
Reported-by: yangyun <yangyun50@huawei.com>
Closes: https://github.com/libfuse/libfuse/issues/1048
Fixes: 57e1176e6086 ("fuse: implement read/write passthrough")
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
This is needed for extending fuse inode size after fuse passthrough write.
Suggested-by: Miklos Szeredi <miklos@szeredi.hu>
Link: https://lore.kernel.org/linux-fsdevel/CAJfpegs=cvZ_NYy6Q_D42XhYS=Sjj5poM1b5TzXzOVvX=R36aA@mail.gmail.com/
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Also initialize regs->psw.mask in perf_arch_fetch_caller_regs().
This way user_mode(regs) will return false, like it should.
It looks like all current users initialize regs to zero, so that this
doesn't fix a bug currently. However it is better to not rely on callers
to do this.
Fixes: 914d52e46490 ("s390: implement perf_arch_fetch_caller_regs")
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
According to the VT220 specification the possible character combinations
sent on RETURN are only CR or CRLF [0].
The Return key sends either a CR character (0/13) or a CR
character (0/13) and an LF character (0/10), depending on the
set/reset state of line feed/new line mode (LNM).
The sclp/vt220 driver however uses LFCR. This can confuse tools, for
example the kunit runner.
Link: https://vt100.net/docs/vt220-rm/chapter3.html#S3.2
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Link: https://lore.kernel.org/r/20241014-s390-kunit-v1-2-941defa765a6@linutronix.de
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
On reboot the SCLP interface is deactivated through a reboot notifier.
This happens before other components using SCLP have the chance to run
their own reboot notifiers.
Two of those components are the SCLP console and tty drivers which try
to flush the last outstanding messages.
At that point the SCLP interface is already unusable and the messages
are discarded.
Execute sclp_deactivate() as late as possible to avoid this issue.
Fixes: 4ae46db99cd8 ("s390/consoles: improve panic notifiers reliability")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Link: https://lore.kernel.org/r/20241014-s390-kunit-v1-1-941defa765a6@linutronix.de
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
The key_to_protkey handler function in module pkey_pckmo should return
with success on all known protected key types, including the new types
introduced by fd197556eef5 ("s390/pkey: Add AES xts and HMAC clear key
token support").
Fixes: fd197556eef5 ("s390/pkey: Add AES xts and HMAC clear key token support")
Signed-off-by: Holger Dengler <dengler@linux.ibm.com>
Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Some clock output names on lvds0 device tree were duplicated from mipi1,
which caused an -EEXIST when registering these clocks during probe.
Fixes: 0fba24b3b956 ("arm64: dts: imx8: add basic lvds0 and lvds1 subsystem")
Signed-off-by: Diogo Silva <diogompaissilva@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The cached version avoids redundant commands to the codec, improving
stability and reducing unnecessary operations. This change ensures
better power management and reliable restoration of pin configurations,
especially after hibernation (S4) and other power transitions.
Fixes: 9988844c457f ("ALSA: hda/conexant - Fix audio routing for HP EliteOne 1000 G2")
Suggested-by: Kai-Heng Feng <kaihengf@nvidia.com>
Suggested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Vasiliy Kovalev <kovalev@altlinux.org>
Link: https://patch.msgid.link/20241016080713.46801-1-kovalev@altlinux.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The configfs store callback should return the number of bytes consumed
not the total number of bytes we actually stored. These could differ if
for example the passed in string had a newline we did not store.
If the returned value does not match the number of bytes written the
writer might assume a failure or keep trying to write the remaining bytes.
For example the following command will hang trying to write the final
newline over and over again (tested on bash 2.05b):
echo foo > function_name
Fixes: 993a44fa85c1 ("usb: gadget: f_uac2: allow changing interface name via configfs")
Cc: stable <stable@kernel.org>
Signed-off-by: Kevin Groeneveld <kgroeneveld@lenbrook.com>
Link: https://lore.kernel.org/r/20241006232637.4267-1-kgroeneveld@lenbrook.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Since commit 6d735722063a ("usb: dwc3: core: Prevent phy suspend during init"),
system suspend is broken on AM62 TI platforms.
Before that commit, both DWC3_GUSB3PIPECTL_SUSPHY and DWC3_GUSB2PHYCFG_SUSPHY
bits (hence forth called 2 SUSPHY bits) were being set during core
initialization and even during core re-initialization after a system
suspend/resume.
These bits are required to be set for system suspend/resume to work correctly
on AM62 platforms.
Since that commit, the 2 SUSPHY bits are not set for DEVICE/OTG mode if gadget
driver is not loaded and started.
For Host mode, the 2 SUSPHY bits are set before the first system suspend but
get cleared at system resume during core re-init and are never set again.
This patch resovles these two issues by ensuring the 2 SUSPHY bits are set
before system suspend and restored to the original state during system resume.
Cc: stable@vger.kernel.org # v6.9+
Fixes: 6d735722063a ("usb: dwc3: core: Prevent phy suspend during init")
Link: https://lore.kernel.org/all/1519dbe7-73b6-4afc-bfe3-23f4f75d772f@kernel.org/
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Tested-by: Markus Schneider-Pargmann <msp@baylibre.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Link: https://lore.kernel.org/r/20241011-am62-lpm-usb-v3-1-562d445625b5@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
If USB virtualizatoin is enabled, USB2 ports are shared between all
Virtual Functions. The USB2 port number owned by an USB2 root hub in
a Virtual Function may be less than total USB2 phy number supported
by the Tegra XUSB controller.
Using total USB2 phy number as port number to check all PORTSC values
would cause invalid memory access.
[ 116.923438] Unable to handle kernel paging request at virtual address 006c622f7665642f
...
[ 117.213640] Call trace:
[ 117.216783] tegra_xusb_enter_elpg+0x23c/0x658
[ 117.222021] tegra_xusb_runtime_suspend+0x40/0x68
[ 117.227260] pm_generic_runtime_suspend+0x30/0x50
[ 117.232847] __rpm_callback+0x84/0x3c0
[ 117.237038] rpm_suspend+0x2dc/0x740
[ 117.241229] pm_runtime_work+0xa0/0xb8
[ 117.245769] process_scheduled_works+0x24c/0x478
[ 117.251007] worker_thread+0x23c/0x328
[ 117.255547] kthread+0x104/0x1b0
[ 117.259389] ret_from_fork+0x10/0x20
[ 117.263582] Code: 54000222 f9461ae8 f8747908 b4ffff48 (f9400100)
Cc: stable@vger.kernel.org # v6.3+
Fixes: a30951d31b25 ("xhci: tegra: USB2 pad power controls")
Signed-off-by: Henry Lin <henryl@nvidia.com>
Link: https://lore.kernel.org/r/20241014042134.27664-1-henryl@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
DWC3 programming guide mentions that when operating in USB2.0 speeds,
if GUSB2PHYCFG[6] or GUSB2PHYCFG[8] is set, it must be cleared prior
to issuing commands and may be set again after the command completes.
But currently while issuing EndXfer command without CmdIOC set, we
wait for 1ms after GUSB2PHYCFG is restored. This results in cases
where EndXfer command doesn't get completed and causes SMMU faults
since requests are unmapped afterwards. Hence restore GUSB2PHYCFG
after waiting for EndXfer command completion.
Cc: stable@vger.kernel.org
Fixes: 1d26ba0944d3 ("usb: dwc3: Wait unconditionally after issuing EndXfer command")
Signed-off-by: Prashanth K <quic_prashk@quicinc.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20240924093208.2524531-1-quic_prashk@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This line is overwriting the result of the above switch-case.
This fixes the tcpm driver getting stuck in a "Sink TX No Go" loop.
Fixes: a4422ff22142 ("usb: typec: qcom: Add Qualcomm PMIC Type-C driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Acked-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241005144146.2345-1-jonathan@marek.ca
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The altmode device release refers to its parent device, but without keeping
a reference to it.
When registering the altmode, get a reference to the parent and put it in
the release function.
Before this fix, when using CONFIG_DEBUG_KOBJECT_RELEASE, we see issues
like this:
[ 43.572860] kobject: 'port0.0' (ffff8880057ba008): kobject_release, parent 0000000000000000 (delayed 3000)
[ 43.573532] kobject: 'port0.1' (ffff8880057bd008): kobject_release, parent 0000000000000000 (delayed 1000)
[ 43.574407] kobject: 'port0' (ffff8880057b9008): kobject_release, parent 0000000000000000 (delayed 3000)
[ 43.575059] kobject: 'port1.0' (ffff8880057ca008): kobject_release, parent 0000000000000000 (delayed 4000)
[ 43.575908] kobject: 'port1.1' (ffff8880057c9008): kobject_release, parent 0000000000000000 (delayed 4000)
[ 43.576908] kobject: 'typec' (ffff8880062dbc00): kobject_release, parent 0000000000000000 (delayed 4000)
[ 43.577769] kobject: 'port1' (ffff8880057bf008): kobject_release, parent 0000000000000000 (delayed 3000)
[ 46.612867] ==================================================================
[ 46.613402] BUG: KASAN: slab-use-after-free in typec_altmode_release+0x38/0x129
[ 46.614003] Read of size 8 at addr ffff8880057b9118 by task kworker/2:1/48
[ 46.614538]
[ 46.614668] CPU: 2 UID: 0 PID: 48 Comm: kworker/2:1 Not tainted 6.12.0-rc1-00138-gedbae730ad31 #535
[ 46.615391] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014
[ 46.616042] Workqueue: events kobject_delayed_cleanup
[ 46.616446] Call Trace:
[ 46.616648] <TASK>
[ 46.616820] dump_stack_lvl+0x5b/0x7c
[ 46.617112] ? typec_altmode_release+0x38/0x129
[ 46.617470] print_report+0x14c/0x49e
[ 46.617769] ? rcu_read_unlock_sched+0x56/0x69
[ 46.618117] ? __virt_addr_valid+0x19a/0x1ab
[ 46.618456] ? kmem_cache_debug_flags+0xc/0x1d
[ 46.618807] ? typec_altmode_release+0x38/0x129
[ 46.619161] kasan_report+0x8d/0xb4
[ 46.619447] ? typec_altmode_release+0x38/0x129
[ 46.619809] ? process_scheduled_works+0x3cb/0x85f
[ 46.620185] typec_altmode_release+0x38/0x129
[ 46.620537] ? process_scheduled_works+0x3cb/0x85f
[ 46.620907] device_release+0xaf/0xf2
[ 46.621206] kobject_delayed_cleanup+0x13b/0x17a
[ 46.621584] process_scheduled_works+0x4f6/0x85f
[ 46.621955] ? __pfx_process_scheduled_works+0x10/0x10
[ 46.622353] ? hlock_class+0x31/0x9a
[ 46.622647] ? lock_acquired+0x361/0x3c3
[ 46.622956] ? move_linked_works+0x46/0x7d
[ 46.623277] worker_thread+0x1ce/0x291
[ 46.623582] ? __kthread_parkme+0xc8/0xdf
[ 46.623900] ? __pfx_worker_thread+0x10/0x10
[ 46.624236] kthread+0x17e/0x190
[ 46.624501] ? kthread+0xfb/0x190
[ 46.624756] ? __pfx_kthread+0x10/0x10
[ 46.625015] ret_from_fork+0x20/0x40
[ 46.625268] ? __pfx_kthread+0x10/0x10
[ 46.625532] ret_from_fork_asm+0x1a/0x30
[ 46.625805] </TASK>
[ 46.625953]
[ 46.626056] Allocated by task 678:
[ 46.626287] kasan_save_stack+0x24/0x44
[ 46.626555] kasan_save_track+0x14/0x2d
[ 46.626811] __kasan_kmalloc+0x3f/0x4d
[ 46.627049] __kmalloc_noprof+0x1bf/0x1f0
[ 46.627362] typec_register_port+0x23/0x491
[ 46.627698] cros_typec_probe+0x634/0xbb6
[ 46.628026] platform_probe+0x47/0x8c
[ 46.628311] really_probe+0x20a/0x47d
[ 46.628605] device_driver_attach+0x39/0x72
[ 46.628940] bind_store+0x87/0xd7
[ 46.629213] kernfs_fop_write_iter+0x1aa/0x218
[ 46.629574] vfs_write+0x1d6/0x29b
[ 46.629856] ksys_write+0xcd/0x13b
[ 46.630128] do_syscall_64+0xd4/0x139
[ 46.630420] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 46.630820]
[ 46.630946] Freed by task 48:
[ 46.631182] kasan_save_stack+0x24/0x44
[ 46.631493] kasan_save_track+0x14/0x2d
[ 46.631799] kasan_save_free_info+0x3f/0x4d
[ 46.632144] __kasan_slab_free+0x37/0x45
[ 46.632474] kfree+0x1d4/0x252
[ 46.632725] device_release+0xaf/0xf2
[ 46.633017] kobject_delayed_cleanup+0x13b/0x17a
[ 46.633388] process_scheduled_works+0x4f6/0x85f
[ 46.633764] worker_thread+0x1ce/0x291
[ 46.634065] kthread+0x17e/0x190
[ 46.634324] ret_from_fork+0x20/0x40
[ 46.634621] ret_from_fork_asm+0x1a/0x30
Fixes: 8a37d87d72f0 ("usb: typec: Bus type for alternate modes")
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241004123738.2964524-1-cascardo@igalia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add a link to the GitHub repository where Raw Gadget issues are managed.
Signed-off-by: Andrey Konovalov <andreyknvl@gmail.com>
Link: https://lore.kernel.org/r/20241012225853.118217-1-andrey.konovalov@linux.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add a MAINTAINERS entry for the Intel La Jolla Cove Adapter (LJCA) set of
drivers.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20241011070414.3124-1-sakari.ailus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Replace the ternary operator with an if. In this case the code is more
clear and also fixes the following cocci warnings:
drivers/staging/media/atomisp/pci/sh_css_frac.h:40:17-18: WARNING opportunity for max()
drivers/staging/media/atomisp/pci/sh_css_frac.h:50:17-18: WARNING opportunity for max()
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The current order of locking between the driver mutex and the v4l2 subdev
state lock causes a circular locking dependency when trying to set up a
link. Fix this.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
[Sakari Ailus: Fix spelling in commit message.]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
IPU6 driver simply depends on X86, X86 and 64BIT cover the
X86_64, redundant X86_64 dependency in Kconfig could be removed.
Fixes: c70281cc83d6 ("media: intel/ipu6: add Kconfig and Makefile")
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
This patch fixes the build errors with `i386-allmodconfig`, the
errors are caused by wrong type casting and 64-bit division.
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
call_get_frame_desc()
The `get_frame_desc()` operation should always be called on a source pad,
which is indicated by the `MEDIA_PAD_FL_SOURCE` flag. This patch adds a
check in `call_get_frame_desc()` to ensure that the `MEDIA_PAD_FL_SOURCE`
flag is set for the pad before invoking `get_frame_desc()`. If the pad is
not a source pad, the function will return an `-EOPNOTSUPP` error,
signaling that the operation is not supported on non-source pads.
Suggested-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The function ub960_rxport_read is being called and afterwards ret is
being checked for any failures, however ret is not being assigned to
the return of the function call. Fix this by assigning ret to the
return of the call which appears to be missing.
Fixes: afe267f2d368 ("media: i2c: add DS90UB960 driver")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Document that callers of v4l2_subdev_{en,dis}able_streams() need to set
the mask to BIT_ULL(0).
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Document the expected {enable,disable}_streams callback behaviour for
drivers that are stream-unaware i.e. don't specify the
V4L2_SUBDEV_CAP_STREAMS sub-device capability flag. In this specific case,
the mask argument can be ignored.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The scope of the s_stream video operation is now fully supported by
{enable,disable}_streams. Explicitly document the s_stream() op as
deprecated and update the related documentation.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Move request_irq() to probe(), in order to avoid requesting IRQ during
device start which happens frequently. As this function is in probe(), it
is better to replace it with its devm variant for managing the resource
efficiently.
While at it, drop the IRQF_SHARED flag as currently there is a single user
for this IRQ.
Suggested-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
If cci_read() fails, 'st' is set to 0 in cci_read(), so we return success,
instead of the expected error code.
Fix it and return the expected error.
Fixes: 9a6d7f2ba2b9 ("media: i2c: st-vgxy61: Convert to CCI register access helpers")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Add documentation for rp1-cfe driver.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Add support for Raspberry Pi CFE. The CFE is a hardware block that
contains:
- MIPI D-PHY
- MIPI CSI-2 receiver
- Front End ISP (FE)
The driver has been upported from the Raspberry Pi kernel commit
88a681df9623 ("ARM: dts: bcm2712-rpi: Add i2c<n>_pins labels").
Co-developed-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Add DT bindings for raspberrypi,rp1-cfe.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Add two meta formats for PiSP FE: V4L2_META_FMT_RPI_FE_CFG and
V4L2_META_FMT_RPI_FE_STATS. The former is used to provide configuration
for the FE and the latter is used to read the statistics from the FE.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Fix three minor spelling/grammar issues:
chunck -> chunk
procotol -> protocol
follow -> following
Signed-off-by: Hridesh MG <hridesh699@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Some R-Car SoCs are capable of capturing RAW10. Extend the format
enumeration, validation and setup to expose and configure for this
format if the particular device supports it.
The VIN is usually capable of converting from most media bus formats to
a range of different pixel formats. However if the input media bus
format is a RAW10 format this is not possible so the corresponding pixel
output format is forced.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Document support for the ISP module in the Renesas V4M (r8a779h0) SoC.
This device is compatible with the CSISP module on the other Gen4 SoCs.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Add the Gen4 family compatible. This will be used instead of a SoC
specific compatible for the new Gen4 SoC V4M. Two Gen4 boards (V3U and
V4H) have already been added prior and their bindings need to be kept
for backward compatibility.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The ISP Channel Selector IP is the same for all current Gen4 devices.
This was not known when adding support for V3U and V4H and a single SoC
specific compatible was used.
Before adding more SoC specific bindings for V4M add a family compatible
fallback for Gen4. That way the driver only needs to be updated once for
Gen4, and we still have the option to fix any problems in the driver if
any testable differences between the SoCs are found.
There are already DTS files using the V3U and V4H compatibles which
needs to be updated to not produce a warning for DTS checks. The driver
also needs to kept the compatible values to be backward compatible , but
for new Gen4 SoCs such as V4M we can avoid this.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The MAX96724 is almost identical to the MAX96712 and can be supported by
the same driver, add support for it.
For the staging driver which only supports patter generation the big
difference is that the datasheet (rev 4) for MAX96724 do not describe
the DEBUG_EXTRA register, which is at offset 0x0009 on MAX96712. It's
not clear if this register is removed or moved to a different offset.
What is known is writing to register 0x0009 have no effect on MAX96724.
This makes it impossible to increase the test pattern clock frequency
from 25 MHz to 75Mhz on MAX96724. To be able to get a stable test
pattern the DPLL frequency have to be increase instead to compensate for
this. The frequency selected is found by experimentation as the MAX96724
datasheet is much sparser then what's available for MAX96712.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The DEBUG_EXTRA register is not part of soon to be added MAX96724
device. To make it easier to understand the differences when reading the
code prepare for the addition by creating named defines for the
register.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Prepare for supporting MAX96724 by moving the soon device specific link
frequency setting into information structure. This struct will be
extended to carry more differences between the two devices supported.
While at it remove trailing comma in device table, no entries will be
appended after the sentinel.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
This check is incorrect and checks the wrong register. Furthermore there
is no documented shared device id register for MAX96712. There might be
overlap with the soon to be added MAX96724 device which do document such
a register.
However as the check was merely a precaution and to check during
development that the driver could talk to the device there is no harm in
removing it all together. A correct and more sophisticated check can be
added later if there ever is a need to differentiate between different
versions of a device.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The MAX96712 and MAX96724 are both quad GMSL2 to CSI-2 deserializers and
are in parts similar, but not identical. The most obvious difference is
on the CSI-2 side where the MAX96712 have 4 PHYs and support D-PHY with
1x4, 2x2 and 4x2 lanes where the MAX96724 only have 2 PHYs and supports
D-PHY with 2x4 or 4x2 lanes.
The register layout overlap in part but there are differences and holes.
Most of the differences are related to the different number of CSI-2
PHYs, but there are other capability differences between the two.
Add a specific compatible for MAX96724 to the max96712 bindings. The
bindings do not yet support validating all DT properties to limit it the
each devices capabilities. However to allow for this in future a
specific compatible for the two different devices are needed.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The V4M is the second Gen4 device that is enabled in the rcar-csi2
driver. There is much overlap with the already supported V4H device. The
registers that where new on Gen4 and where added with the V4H prefix are
retained and only new registers unique to the V4M are added with the new
V4M prefix. This follows the style for when V4H was added which had an
overlap with Gen3 registers.
The V4M CSI-2 receiver supports D-PHY mode only, either in 1-, 2- or
4-lane configuration. The datasheets do not document lane swapping and
is left out for now.
While the V4M only supports D-PHY the configuration for it is added in
such a way that it can be reused for V4H which supports both C-PHY and
D-PHY. No known SoC exists to test the D-PHY configuration on V4H so
it's not wired-up.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Later datasheets add documentation for two magic value used for V4H
support. The same registers will also be used for V4M support, document
them.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Prepare for V4M support by moving the PHTW write helpers to the generic
write helpers. This is needed as adding V4M support will involve
interact with the PHTW register from code that are logically grouped
with similar code in such a way that forward declarations of these
helpers would otherwise be needed.
The functions are moved verbatim.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The structure mapping a configuration information to a particular mpbs
setting needs to be extended with more information to support future
SoCs. Before it is extended reduce code duplication by creating a helper
to lookup information from an array of mbps setting, the lookup code
has already been copied to two speared locations.
While at it rename the structure to make it clear it contains
information related to a mbps setting, not just a single register value.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Most of the registers used on the R-Car V4M CSI-2 IP are shared with the
devices already supported by the rcar-csi2 driver. Two registers which
function and layout are the same are however found on different offsets.
Prepare for adding support for R-Car V4M by storing the offset to these
two registers offsets in the device information structured. This way the
code, which is shared between the devices, can be reused when V4M
support is added.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The helper to write an array of code and data values to the PHY Test
Interface Write Register (PHTW) register uses the case where both code
and data are zero as an exit condition. This prevents writing data = 0
and code = 0 to the register.
Up until now this has been OK as no such combination where needed, and
it was a convenient exit condition. In future writing data = 0 and code
= 0 to the PHTW register will be needed.
Avoid using an exit condition when writing an array of PHTW values and
instead pass the length of the array to the helper. This allows any
combination of code and data to be written.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The data and code written thru the Test Interface Write Register (PHTW)
register are 8-bit wide, change the datatype used to reflect this.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Document support for the CSI-2 module in the Renesas V4M (r8a779h0) SoC.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
