summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-08-26drm/amd/display: Revert HDCP disable sequence changeJaehyun Chung
[Why] Revert HDCP disable sequence change that blanks stream before disabling HDCP. PSP and HW teams are currently investigating the root cause of why HDCP cannot be disabled before stream blank, which is expected to work without issues. Signed-off-by: Jaehyun Chung <jaehyun.chung@amd.com> Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-26drm/amd/display: Send H14b-VSIF specified in HDMIWayne Lin
[Why] Current function excludes the logic to generate H14b-VSIF. Now it constructs HF-VSIF only and causes HDMI compliace test fail. [How] According to HDMI spec, source devices shall utilize the H14b-VSIF whenever the signaling capabilities of the H14b-VSIF allow this. Here keep the logic for HF-VSIF and add H14b-VSIF construction part. Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Reviewed-by: Roman Li <Roman.Li@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-26drm/amd/display: Call DMUB for eDP power controlChris Park
[Why] If DMUB is used, LVTMA VBIOS call can be used to control eDP instead of tranditional transmitter control. Interface is agreed with VBIOS for eDP to use this new path to program LVTMA registers. [How] Expose DAL interface to send DMUB command for LVTMA control that VBIOS currently uses. Signed-off-by: Chris Park <Chris.Park@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-26drm/amd/display: 3.2.99Aric Cyr
Signed-off-by: Aric Cyr <aric.cyr@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-26drm/amd/display: Send DISPLAY_OFF after power down on bootSung Lee
[WHY] update_clocks might not be called on headless adapters. This means DISPLAY_OFF may not be sent in headless cases. [HOW] If hardware is powered down on boot because it is headless (mode set does not happen on that adapter) also send DISPLAY_OFF notification. Signed-off-by: Sung Lee <sung.lee@amd.com> Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-26drm/amdgpu/gfx10: refine mgcg settingJiansong Chen
1. enable ENABLE_CGTS_LEGACY to fix specviewperf11 random hang. 2. remove obsolete RLC_CGTT_SCLK_OVERRIDE workaround. Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-26drm/amdkfd: implement the dGPU fallback path for apu (v6)Huang Rui
We still have a few iommu issues which need to address, so force raven as "dgpu" path for the moment. This is to add the fallback path to bypass IOMMU if IOMMU v2 is disabled or ACPI CRAT table not correct. v2: Use ignore_crat parameter to decide whether it will go with IOMMUv2. v3: Align with existed thunk, don't change the way of raven, only renoir will use "dgpu" path by default. v4: don't update global ignore_crat in the driver, and revise fallback function if CRAT is broken. v5: refine acpi crat good but no iommu support case, and rename the title. v6: fix the issue of dGPU initialized firstly, just modify the report value in the node_show(). Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-26drm/amd/pm: correct Vega20 swctf limit settingEvan Quan
Correct the Vega20 thermal swctf limit. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-26drm/amd/pm: correct Vega12 swctf limit settingEvan Quan
Correct the Vega12 thermal swctf limit. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-26drm/amd/pm: correct Vega10 swctf limit settingEvan Quan
Correct the Vega10 thermal swctf limit. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1267 Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-26drm/amdgpu: Embed drm_device into amdgpu_device (v3)Luben Tuikov
a) Embed struct drm_device into struct amdgpu_device. b) Modify the inline-f drm_to_adev() accordingly. c) Modify the inline-f adev_to_drm() accordingly. d) Eliminate the use of drm_device.dev_private, in amdgpu. e) Switch from using drm_dev_alloc() to drm_dev_init(). f) Add a DRM driver release function, which frees the container amdgpu_device after all krefs on the contained drm_device have been released. v2: Split out adding adev_to_drm() into its own patch (previous commit), making this patch more succinct and clear. More detailed commit description. v3: squash in fix to call drmm_add_final_kfree() to avoid a warning. Signed-off-by: Luben Tuikov <luben.tuikov@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-26drm/amd/display: Fix memleak in amdgpu_dm_mode_config_initDinghao Liu
When amdgpu_display_modeset_create_props() fails, state and state->context should be freed to prevent memleak. It's the same when amdgpu_dm_audio_init() fails. Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-26drm/amdgpu: disable runtime pm for navy_flounderJiansong Chen
Disable runtime pm for navy_flounder temporarily. Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-26drm/amd/display: Retry AUX write when fail occursWayne Lin
[Why] In dm_dp_aux_transfer() now, we forget to handle AUX_WR fail cases. We suppose every write wil get done successfully and hence some AUX commands might not sent out indeed. [How] Check if AUX_WR success. If not, retry it. Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Reviewed-by: Hersen Wu <hersenxs.wu@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-26drm/amdgpu: Fix buffer overflow in INFO ioctlAlex Deucher
The values for "se_num" and "sh_num" come from the user in the ioctl. They can be in the 0-255 range but if they're more than AMDGPU_GFX_MAX_SE (4) or AMDGPU_GFX_MAX_SH_PER_SE (2) then it results in an out of bounds read. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2020-08-26drm/amd/powerplay: Fix hardmins not being sent to SMU for RVNicholas Kazlauskas
[Why] DC uses these to raise the voltage as needed for higher dispclk/dppclk and to ensure that we have enough bandwidth to drive the displays. There's a bug preventing these from actuially sending messages since it's checking the actual clock (which is 0) instead of the incoming clock (which shouldn't be 0) when deciding to send the hardmin. [How] Check the clocks != 0 instead of the actual clocks. Fixes: 9ed9203c3ee7 ("drm/amd/powerplay: rv dal-pplib interface refactor powerplay part") Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2020-08-26drm/amdgpu: use MODE1 reset for navy_flounder by defaultJiansong Chen
Switch default gpu reset method to MODE1 for navy_flounder. Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-26drm/amd/pm: correct the thermal alert temperature limit settingsEvan Quan
Do the maths in celsius degree. This can fix the issues caused by the changes below: drm/amd/pm: correct Vega20 swctf limit setting drm/amd/pm: correct Vega12 swctf limit setting drm/amd/pm: correct Vega10 swctf limit setting Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2020-08-26drm/amdgpu: add asd fw check before loading asdTao Zhou
asd is not ready for some ASICs in early stage, and psp->asd_fw is more generic than ASIC name in the check. Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Jiansong Chen <Jiansong.Chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-26drm/amd/display: Keep current gain when ABM disable immediatelyBrandon Syu
[Why] When system enters s3/s0i3, backlight PWM would set user level. [How] ABM disable function add keep current gain to avoid it. Signed-off-by: Brandon Syu <Brandon.Syu@amd.com> Reviewed-by: Josip Pavic <Josip.Pavic@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-26drm/amd/display: Fix passive dongle mistaken as active dongle in EDID emulationSamson Tam
[Why] dongle_type is set during dongle connection but for passive dongles, dongle_type is not set. If user starts with an active dongle and then switches to a passive dongle, it will still report as an active dongle. Trying to emulate the wrong connecter type results in display not lighting up. [How] Set dpcd_caps.dongle_type for passive dongles in detect_dp(). Signed-off-by: Samson Tam <Samson.Tam@amd.com> Reviewed-by: Joshua Aberback <Joshua.Aberback@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-26drm/amd/display: Revert HDCP disable sequence changeJaehyun Chung
[Why] Revert HDCP disable sequence change that blanks stream before disabling HDCP. PSP and HW teams are currently investigating the root cause of why HDCP cannot be disabled before stream blank, which is expected to work without issues. Signed-off-by: Jaehyun Chung <jaehyun.chung@amd.com> Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-26drm/amd/display: Send DISPLAY_OFF after power down on bootSung Lee
[WHY] update_clocks might not be called on headless adapters. This means DISPLAY_OFF may not be sent in headless cases. [HOW] If hardware is powered down on boot because it is headless (mode set does not happen on that adapter) also send DISPLAY_OFF notification. Signed-off-by: Sung Lee <sung.lee@amd.com> Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-26drm/amdgpu/gfx10: refine mgcg settingJiansong Chen
1. enable ENABLE_CGTS_LEGACY to fix specviewperf11 random hang. 2. remove obsolete RLC_CGTT_SCLK_OVERRIDE workaround. Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2020-08-26drm/amd/pm: correct Vega20 swctf limit settingEvan Quan
Correct the Vega20 thermal swctf limit. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2020-08-26drm/amd/pm: correct Vega12 swctf limit settingEvan Quan
Correct the Vega12 thermal swctf limit. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2020-08-26drm/amd/pm: correct Vega10 swctf limit settingEvan Quan
Correct the Vega10 thermal swctf limit. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1267 Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2020-08-26drm/amd/pm: set VCN pg per instancesJiansong Chen
When deciding whether to set pg for vcn1, instances number is more generic than chip name. Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-26drm/amd/pm: enable run_btc callback for sienna_cichlidJiansong Chen
DC BTC support for sienna_cichlid is added, it provides the DC tolerance and aging measurements. Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-26drivers: gpu: amd: Initialize amdgpu_dm_backlight_caps object to 0 in ↵Furquan Shaikh
amdgpu_dm_update_backlight_caps In `amdgpu_dm_update_backlight_caps()`, there is a local `amdgpu_dm_backlight_caps` object that is filled in by `amdgpu_acpi_get_backlight_caps()`. However, this object is uninitialized before the call and hence the subsequent check for aux_support can fail since it is not initialized by `amdgpu_acpi_get_backlight_caps()` as well. This change initializes this local `amdgpu_dm_backlight_caps` object to 0. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Furquan Shaikh <furquan@google.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-26drm/amd/display: Reject overlay plane configurations in multi-display scenariosNicholas Kazlauskas
[Why] These aren't stable on some platform configurations when driving multiple displays, especially on higher resolution. In particular the delay in asserting p-state and validating from x86 outweights any power or performance benefit from the hardware composition. Under some configurations this will manifest itself as extreme stutter or unresponsiveness especially when combined with cursor movement. [How] Disable these for now. Exposing overlays to userspace doesn't guarantee that they'll be able to use them in any and all configurations and it's part of the DRM contract to have userspace gracefully handle validation failures when they occur. Valdiation occurs as part of DC and this in particular affects RV, so disable this in dcn10_global_validation. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Hersen Wu <hersenxs.wu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-26drm/amd/display: use correct scale for actual_brightnessAlexander Monakov
Documentation for sysfs backlight level interface requires that values in both 'brightness' and 'actual_brightness' files are interpreted to be in range from 0 to the value given in the 'max_brightness' file. With amdgpu, max_brightness gives 255, and values written by the user into 'brightness' are internally rescaled to a wider range. However, reading from 'actual_brightness' gives the raw register value without inverse rescaling. This causes issues for various userspace tools such as PowerTop and systemd that expect the value to be in the correct range. Introduce a helper to retrieve internal backlight range. Use it to reimplement 'convert_brightness' as 'convert_brightness_from_user' and introduce 'convert_brightness_to_user'. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=203905 Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1242 Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alexander Monakov <amonakov@ispras.ru> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2020-08-26drm/amd/display: should check error using DC_OKTong Zhang
core_link_read_dpcd returns only DC_OK(1) and DC_ERROR_UNEXPECTED(-1), the caller should check error using DC_OK instead of checking against 0 Signed-off-by: Tong Zhang <ztong0001@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-26iio: dpot-dac: fix code comment in dpot_dac_read_raw()Gustavo A. R. Silva
After the replacement of the /* fall through */ comment with the fallthrough pseudo-keyword macro, the natural reading of a code comment was broken. Fix the natural reading of such a comment and make it intelligible. Reported-by: Peter Rosin <peda@axentia.se> Acked-by: Peter Rosin <peda@axentia.se> Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-08-26ALSA: hda/hdmi: always check pin power status in i915 pin fixupKai Vehmanen
When system is suspended with active audio playback to HDMI/DP, two alternative sequences can happen at resume: a) monitor is detected first and ALSA prepare follows normal stream setup sequence, or b) ALSA prepare is called first, but monitor is not yet detected, so PCM is restarted without a pin, In case of (b), on i915 systems, haswell_verify_D0() is not called at resume and the pin power state may be incorrect. Result is lack of audio after resume with no error reported back to user-space. Fix the problem by always verifying converter and pin state in the i915_pin_cvt_fixup(). BugLink: https://github.com/thesofproject/linux/issues/2388 Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200826170306.701566-1-kai.vehmanen@linux.intel.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-08-26drm/i915/gt: Implement WA_1406941453Clint Taylor
Enable HW Default flip for small PL. bspec: 52890 bspec: 53508 bspec: 53273 v2: rebase to drm-tip v3: move from ctx to gt workarounds. Remove whitelist. v4: move to rcs WA init Cc: Matt Atwood <matthew.s.atwood@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: José Roberto de Souza <jose.souza@intel.com> Signed-off-by: Clint Taylor <clinton.a.taylor@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200826025724.20944-1-clinton.a.taylor@intel.com
2020-08-26Merge tag 'tty-5.9-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial fixes from Greg KH: "Here are a few small TTY/Serial/vt fixes for 5.9-rc3 Included in here are: - qcom serial fixes - vt ioctl and core bugfixes - pl011 serial driver fixes - 8250 serial driver fixes - other misc serial driver fixes and for good measure: - fbcon fix for syzbot found problem. All of these have been in linux-next for a while with no reported issues" * tag 'tty-5.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: tty: serial: imx: add dependence and build for earlycon serial: samsung: Removes the IRQ not found warning serial: 8250: change lock order in serial8250_do_startup() serial: stm32: avoid kernel warning on absence of optional IRQ serial: pl011: Fix oops on -EPROBE_DEFER serial: pl011: Don't leak amba_ports entry on driver register error serial: 8250_exar: Fix number of ports for Commtech PCIe cards tty: serial: qcom_geni_serial: Drop __init from qcom_geni_console_setup serial: qcom_geni_serial: Fix recent kdb hang vt_ioctl: change VT_RESIZEX ioctl to check for error return from vc_resize() fbcon: prevent user font height or width change from causing potential out-of-bounds access vt: defer kfree() of vc_screenbuf in vc_do_resize()
2020-08-26Merge tag 'char-misc-5.9-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver fixes from Greg KH: "Here are some small char and misc and other driver subsystem fixes for 5.9-rc3. The majority of these are tiny habanalabs driver fixes, but also in here are: - speakup build fixes now that it is out of staging and got exposed to more build systems all of a sudden - mei driver fix All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-5.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: habanalabs: correctly report inbound pci region cfg error habanalabs: check correct vmalloc return code habanalabs: validate FW file size habanalabs: fix incorrect check on failed workqueue create habanalabs: set max power according to card type habanalabs: proper handling of alloc size in coresight habanalabs: set clock gating according to mask habanalabs: verify user input in cs_ioctl_signal_wait habanalabs: Fix a loop in gaudi_extract_ecc_info() habanalabs: Fix memory corruption in debugfs habanalabs: validate packet id during CB parse habanalabs: Validate user address before mapping habanalabs: unmap PCI bars upon iATU failure mei: hdcp: fix mei_hdcp_verify_mprime() input parameter speakup: only build serialio when ISA is enabled speakup: Fix wait_for_xmitr for ttyio case
2020-08-26Merge tag 'hyperv-fixes-signed' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull hyperv fixes from Wei Liu: "Two patches from Vineeth to improve Hyper-V timesync facility" * tag 'hyperv-fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: hv_utils: drain the timesync packets on onchannelcallback hv_utils: return error if host timesysnc update is stale
2020-08-26Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds
Pull virtio bugfixes from Michael Tsirkin: "A couple vdpa and vhost bugfixes" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: vdpa/mlx5: Avoid warnings about shifts on 32-bit platforms vhost-iotlb: fix vhost_iotlb_itree_next() documentation vdpa: ifcvf: free config irq in ifcvf_free_irq() vdpa: ifcvf: return err when fail to request config irq
2020-08-26drm/bridge: ps8640: Print an error if VDO control failsEnric Balletbo i Serra
Print an error message inside ps8640_bridge_vdo_control() function when it fails so we can simplify a bit the callers, they will only need to check the error code. Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Reviewed-by: Bilal Wasim <bwasim.lkml@gmail.com> Tested-by: Bilal Wasim <bwasim.lkml@gmail.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200826081526.674866-5-enric.balletbo@collabora.com
2020-08-26drm/bridge: ps8640: Return an error for incorrect attach flagsEnric Balletbo i Serra
Bridge drivers that implement the new model only shall return an error from their attach() handler when the DRM_BRIDGE_ATTACH_NO_CONNECTOR flag is not set. So make sure we return an error because only the new drm_bridge model is supported. Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Reviewed-by: Bilal Wasim <bwasim.lkml@gmail.com> Tested-by: Bilal Wasim <bwasim.lkml@gmail.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200826081526.674866-4-enric.balletbo@collabora.com
2020-08-26drm/bridge: ps8640: Get the EDID from eDP controlEnric Balletbo i Serra
The PS8640 DSI-to-eDP bridge can retrieve the EDID, so implement the .get_edid callback and set the flag to indicate the core to use it. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200826081526.674866-3-enric.balletbo@collabora.com
2020-08-26drm/bridge_connector: Set default status connected for eDP connectorsEnric Balletbo i Serra
In an eDP application, HPD is not required and on most bridge chips useless. If HPD is not used, we need to set initial status as connected, otherwise the connector created by the drm_bridge_connector API remains in an unknown state. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Reviewed-by: Bilal Wasim <bwasim.lkml@gmail.com> Tested-by: Bilal Wasim <bwasim.lkml@gmail.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200826081526.674866-2-enric.balletbo@collabora.com
2020-08-26io_uring: make offset == -1 consistent with preadv2/pwritev2Jens Axboe
The man page for io_uring generally claims were consistent with what preadv2 and pwritev2 accept, but turns out there's a slight discrepancy in how offset == -1 is handled for pipes/streams. preadv doesn't allow it, but preadv2 does. This currently causes io_uring to return -EINVAL if that is attempted, but we should allow that as documented. This change makes us consistent with preadv2/pwritev2 for just passing in a NULL ppos for streams if the offset is -1. Cc: stable@vger.kernel.org # v5.7+ Reported-by: Benedikt Ames <wisp3rwind@posteo.eu> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-08-26MAINTAINERS: Add entry for HPE Superdome Flex (UV) maintainersSteve Wahl
Add an entry and email addresses for people at HPE who are supporting Linux on the Superdome Flex (a.k.a) UV platform. [ bp: Capitalize "linux" too :) ] Signed-off-by: Steve Wahl <steve.wahl@hpe.com> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/20200824221439.GA52810@swahl-home.5wahls.com
2020-08-26s390/vmem: fix vmem_add_range for 4-level pagingVasily Gorbik
The kernel currently crashes if 4-level paging is used. Add missing p4d_populate for just allocated pud entry. Fixes: 3e0d3e408e63 ("s390/vmem: consolidate vmem_add_range() and vmem_remove_range()") Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-08-26s390: don't trace preemption in percpu macrosSven Schnelle
Since commit a21ee6055c30 ("lockdep: Change hardirq{s_enabled,_context} to per-cpu variables") the lockdep code itself uses percpu variables. This leads to recursions because the percpu macros are calling preempt_enable() which might call trace_preempt_on(). Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Reviewed-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-08-26loop: Set correct device size when using LOOP_CONFIGUREMartijn Coenen
The device size calculation was done before processing the loop configuration, which meant that the we set the size on the underlying block device incorrectly in case lo_offset/lo_sizelimit were set in the configuration. Delay computing the size until we've setup the device parameters correctly. Fixes: 3448914e8cc5("loop: Add LOOP_CONFIGURE ioctl") Reported-by: Lennart Poettering <mzxreary@0pointer.de> Tested-by: Yang Xu <xuyang2018.jy@cn.fujitsu.com> Signed-off-by: Martijn Coenen <maco@android.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-08-26nbd: restore default timeout when setting it to zeroHou Pu
If we configured io timeout of nbd0 to 100s. Later after we finished using it, we configured nbd0 again and set the io timeout to 0. We expect it would timeout after 30 seconds and keep retry. But in fact we could not change the timeout when we set it to 0. the timeout is still the original 100s. So change the timeout to default 30s when we set it to zero. It also behaves same as commit 2da22da57348 ("nbd: fix zero cmd timeout handling v2"). It becomes more important if we were reconfigure a nbd device and the io timeout it set to zero. Because it could take 30s to detect the new socket and thus io could be completed more quickly compared to 100s. Signed-off-by: Hou Pu <houpu@bytedance.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
generated by cgit (git 2.34.1) at 2025-09-14 10:05:48 +0000