summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-07-03arm64: Add KRYO4XX gold CPU cores to erratum list 1463225 and 1418040Sai Prakash Ranjan
KRYO4XX gold/big CPU core revisions r0p0 to r3p1 are affected by erratum 1463225 and 1418040, so add them to the respective list. The variant and revision bits are implementation defined and are different from the their Cortex CPU counterparts on which they are based on, i.e., (r0p0 to r3p1) is equivalent to (rcpe to rfpf). Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Link: https://lore.kernel.org/r/83780e80c6377c12ca51b5d53186b61241685e49.1593539394.git.saiprakash.ranjan@codeaurora.org Signed-off-by: Will Deacon <will@kernel.org>
2020-07-03arm64: Add MIDR value for KRYO4XX gold CPU coresSai Prakash Ranjan
Add MIDR value for KRYO4XX gold/big CPU cores which are used in Qualcomm Technologies, Inc. SoCs. This will be used to identify and apply erratum which are applicable for these CPU cores. Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Link: https://lore.kernel.org/r/9093fb82e22441076280ca1b729242ffde80c432.1593539394.git.saiprakash.ranjan@codeaurora.org Signed-off-by: Will Deacon <will@kernel.org>
2020-07-03Merge branch 'acpi-fan'Rafael J. Wysocki
* acpi-fan: ACPI: fan: Fix Tiger Lake ACPI device ID
2020-07-03netfilter: conntrack: refetch conntrack after nf_conntrack_update()Pablo Neira Ayuso
__nf_conntrack_update() might refresh the conntrack object that is attached to the skbuff. Otherwise, this triggers UAF. [ 633.200434] ================================================================== [ 633.200472] BUG: KASAN: use-after-free in nf_conntrack_update+0x34e/0x770 [nf_conntrack] [ 633.200478] Read of size 1 at addr ffff888370804c00 by task nfqnl_test/6769 [ 633.200487] CPU: 1 PID: 6769 Comm: nfqnl_test Not tainted 5.8.0-rc2+ #388 [ 633.200490] Hardware name: LENOVO 23259H1/23259H1, BIOS G2ET32WW (1.12 ) 05/30/2012 [ 633.200491] Call Trace: [ 633.200499] dump_stack+0x7c/0xb0 [ 633.200526] ? nf_conntrack_update+0x34e/0x770 [nf_conntrack] [ 633.200532] print_address_description.constprop.6+0x1a/0x200 [ 633.200539] ? _raw_write_lock_irqsave+0xc0/0xc0 [ 633.200568] ? nf_conntrack_update+0x34e/0x770 [nf_conntrack] [ 633.200594] ? nf_conntrack_update+0x34e/0x770 [nf_conntrack] [ 633.200598] kasan_report.cold.9+0x1f/0x42 [ 633.200604] ? call_rcu+0x2c0/0x390 [ 633.200633] ? nf_conntrack_update+0x34e/0x770 [nf_conntrack] [ 633.200659] nf_conntrack_update+0x34e/0x770 [nf_conntrack] [ 633.200687] ? nf_conntrack_find_get+0x30/0x30 [nf_conntrack] Closes: https://bugzilla.netfilter.org/show_bug.cgi?id=1436 Fixes: ee04805ff54a ("netfilter: conntrack: make conntrack userspace helpers work again") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-07-03tools lib traceevent: Add proper KBUFFER_TYPE_TIME_STAMP handlingTom Zanussi
Kernel commit dc4e2801d400 (ring-buffer: Redefine the unimplemented RINGBUF_TYPE_TIME_STAMP) changed the way the ring buffer timestamps work - after that commit the previously unimplemented RINGBUF_TYPE_TIME_STAMP type causes the time delta to be used as a timestamp rather than a delta to be added to the timestamp. The trace-cmd code didn't get updated to handle this, so misinterprets the event data for this case, which causes a cascade of errors, including trace-report not being able to identify synthetic (or any other) events generated by the histogram code (which uses TIME_STAMP mode). For example, the following triggers along with the trace-cmd shown cause an UNKNOWN_EVENT error and trace-cmd report crash: # echo 'wakeup_latency u64 lat pid_t pid char comm[16]' > /sys/kernel/debug/tracing/synthetic_events # echo 'hist:keys=pid:ts0=common_timestamp.usecs if comm=="ping"' > /sys/kernel/debug/tracing/events/sched/sched_wakeup/trigger # echo 'hist:keys=next_pid:wakeup_lat=common_timestamp.usecs-$ts0:onmatch(sched.sched_wakeup).trace(wakeup_latency,$wakeup_lat,next_pid,next_comm) if next_comm=="ping"' > /sys/kernel/debug/tracing/events/sched/sched_switch/trigger # echo 'hist:keys=comm,pid,lat:wakeup_lat=lat:sort=lat' > /sys/kernel/debug/tracing/events/synthetic/wakeup_latency/trigger # trace-cmd record -e wakeup_latency -e sched_wakeup -f comm==\"ping\" ping localhost -c 5 # trace-cmd report CPU 0 is empty CPU 1 is empty CPU 2 is empty CPU 3 is empty CPU 5 is empty CPU 6 is empty CPU 7 is empty cpus=8 ug! no event found for type 0 [UNKNOWN TYPE 0] ug! no event found for type 11520 Segmentation fault (core dumped) After this patch we get the correct interpretation and the events are shown properly: # trace-cmd report CPU 0 is empty CPU 1 is empty CPU 2 is empty CPU 3 is empty CPU 5 is empty CPU 6 is empty CPU 7 is empty cpus=8 <idle>-0 [004] 23284.341392: sched_wakeup: ping:12031 [120] success=1 CPU:004 <idle>-0 [004] 23284.341464: wakeup_latency: lat=58, pid=12031, comm=ping <idle>-0 [004] 23285.365303: sched_wakeup: ping:12031 [120] success=1 CPU:004 <idle>-0 [004] 23285.365382: wakeup_latency: lat=64, pid=12031, comm=ping <idle>-0 [004] 23286.389290: sched_wakeup: ping:12031 [120] success=1 CPU:004 <idle>-0 [004] 23286.389378: wakeup_latency: lat=72, pid=12031, comm=ping <idle>-0 [004] 23287.413213: sched_wakeup: ping:12031 [120] success=1 CPU:004 <idle>-0 [004] 23287.413291: wakeup_latency: lat=64, pid=12031, comm=ping Link: http://lkml.kernel.org/r/1567628224.13841.4.camel@kernel.org Link: http://lore.kernel.org/linux-trace-devel/20200625100516.365338-3-tz.stoyanov@gmail.com Signed-off-by: Tom Zanussi <zanussi@kernel.org> [ Ported from trace-cmd.git ] Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: linux-trace-devel@vger.kernel.org Link: http://lore.kernel.org/lkml/20200702185703.785094515@goodmis.org Signed-off-by: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-07-03tools lib traceevent: Add API to read time information from kbufferSteven Rostedt (Red Hat)
Add the functions kbuffer_subbuf_timestamp() and kbuffer_ptr_delta() to get the timing data stored in the ring buffer that is used to produced the time stamps of the records. This is useful for tools like trace-cmd to be able to display the content of the read data to understand why the records show the time stamps that they do. Link: http://lore.kernel.org/linux-trace-devel/20200625100516.365338-2-tz.stoyanov@gmail.com Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> [ Ported from trace-cmd.git ] Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: linux-trace-devel@vger.kernel.org Link: http://lore.kernel.org/lkml/20200702185703.619656282@goodmis.org Signed-off-by: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-07-03perf scripts python: exported-sql-viewer.py: Fix time chart call treeAdrian Hunter
Using Python version 3.8.2 and PySide2 version 5.14.0, time chart call tree would not expand the tree to the result. Fix by using setExpanded(). Example: $ perf record -e intel_pt//u uname Linux [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.034 MB perf.data ] $ perf script --itrace=bep -s ~/libexec/perf-core/scripts/python/export-to-sqlite.py perf.data.db branches calls 2020-06-26 15:32:14.928997 Creating database ... 2020-06-26 15:32:14.933971 Writing records... 2020-06-26 15:32:15.535251 Adding indexes 2020-06-26 15:32:15.542993 Dropping unused tables 2020-06-26 15:32:15.549716 Done $ python3 ~/libexec/perf-core/scripts/python/exported-sql-viewer.py perf.data.db Select: Charts -> Time chart by CPU Move mouse over middle of chart Right-click and select Show Call Tree Before: displays Call Tree but not expanded to selected time After: displays Call Tree expanded to selected time Fixes: e69d5df75d74d ("perf scripts python: exported-sql-viewer.py: Add ability for Call tree to open at a specified task and time") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: stable@vger.kernel.org Link: http://lore.kernel.org/lkml/20200629091955.17090-7-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-07-03perf scripts python: exported-sql-viewer.py: Fix zero id in call tree 'Find' ↵Adrian Hunter
result Using ctrl-F ('Find') would not find 'unknown' because it matches id zero. Fix by excluding id zero from selection. Example: $ perf record -e intel_pt//u uname Linux [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.034 MB perf.data ] $ perf script --itrace=bep -s ~/libexec/perf-core/scripts/python/export-to-sqlite.py perf.data.db branches calls 2020-06-26 15:32:14.928997 Creating database ... 2020-06-26 15:32:14.933971 Writing records... 2020-06-26 15:32:15.535251 Adding indexes 2020-06-26 15:32:15.542993 Dropping unused tables 2020-06-26 15:32:15.549716 Done $ python3 ~/libexec/perf-core/scripts/python/exported-sql-viewer.py perf.data.db Select: Reports -> Call Tree Press: Ctrl-F Enter: unknown Press: Enter Before: displays 'unknown' not found After: tree is expanded to line showing 'unknown' Fixes: ae8b887c00d3f ("perf scripts python: exported-sql-viewer.py: Add call tree") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: stable@vger.kernel.org Link: http://lore.kernel.org/lkml/20200629091955.17090-6-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-07-03perf scripts python: exported-sql-viewer.py: Fix zero id in call graph ↵Adrian Hunter
'Find' result Using ctrl-F ('Find') would not find 'unknown' because it matches id zero. Fix by excluding id zero from selection. Example: $ perf record -e intel_pt//u uname Linux [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.034 MB perf.data ] $ perf script --itrace=bep -s ~/libexec/perf-core/scripts/python/export-to-sqlite.py perf.data.db branches calls 2020-06-26 15:32:14.928997 Creating database ... 2020-06-26 15:32:14.933971 Writing records... 2020-06-26 15:32:15.535251 Adding indexes 2020-06-26 15:32:15.542993 Dropping unused tables 2020-06-26 15:32:15.549716 Done $ python3 ~/libexec/perf-core/scripts/python/exported-sql-viewer.py perf.data.db Select: Reports -> Context-Sensitive Call Graph Press: Ctrl-F Enter: unknown Press: Enter Before: gets stuck After: tree is expanded to line showing 'unknown' Fixes: 254c0d820b86d ("perf scripts python: exported-sql-viewer.py: Factor out CallGraphModelBase") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: stable@vger.kernel.org Link: http://lore.kernel.org/lkml/20200629091955.17090-5-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-07-03perf scripts python: exported-sql-viewer.py: Fix unexpanded 'Find' resultAdrian Hunter
Using Python version 3.8.2 and PySide2 version 5.14.0, ctrl-F ('Find') would not expand the tree to the result. Fix by using setExpanded(). Example: $ perf record -e intel_pt//u uname Linux [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.034 MB perf.data ] $ perf script --itrace=bep -s ~/libexec/perf-core/scripts/python/export-to-sqlite.py perf.data.db branches calls 2020-06-26 15:32:14.928997 Creating database ... 2020-06-26 15:32:14.933971 Writing records... 2020-06-26 15:32:15.535251 Adding indexes 2020-06-26 15:32:15.542993 Dropping unused tables 2020-06-26 15:32:15.549716 Done $ python3 ~/libexec/perf-core/scripts/python/exported-sql-viewer.py perf.data.db Select: Reports -> Context-Sensitive Call Graph or Reports -> Call Tree Press: Ctrl-F Enter: main Press: Enter Before: line showing 'main' does not display After: tree is expanded to line showing 'main' Fixes: ebd70c7dc2f5f ("perf scripts python: exported-sql-viewer.py: Add ability to find symbols in the call-graph") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: stable@vger.kernel.org Link: http://lore.kernel.org/lkml/20200629091955.17090-4-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-07-03perf record: Fix duplicated sideband events with Intel PT system wide tracingAdrian Hunter
Commit 0a892c1c9472 ("perf record: Add dummy event during system wide synthesis") reveals an issue with Intel PT system wide tracing. Specifically that Intel PT already adds a dummy tracking event, and it is not the first event. Adding another dummy tracking event causes duplicated sideband events. Fix by checking for an existing dummy tracking event first. Example showing duplicated switch events: Before: # perf record -a -e intel_pt//u uname Linux [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.895 MB perf.data ] # perf script --no-itrace --show-switch-events | head swapper 0 [007] 6390.516222: PERF_RECORD_SWITCH_CPU_WIDE OUT preempt next pid/tid: 11/11 swapper 0 [007] 6390.516222: PERF_RECORD_SWITCH_CPU_WIDE OUT preempt next pid/tid: 11/11 rcu_sched 11 [007] 6390.516223: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 0/0 rcu_sched 11 [007] 6390.516224: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 0/0 rcu_sched 11 [007] 6390.516227: PERF_RECORD_SWITCH_CPU_WIDE OUT next pid/tid: 0/0 rcu_sched 11 [007] 6390.516227: PERF_RECORD_SWITCH_CPU_WIDE OUT next pid/tid: 0/0 swapper 0 [007] 6390.516228: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 11/11 swapper 0 [007] 6390.516228: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 11/11 swapper 0 [002] 6390.516415: PERF_RECORD_SWITCH_CPU_WIDE OUT preempt next pid/tid: 5556/5559 swapper 0 [002] 6390.516416: PERF_RECORD_SWITCH_CPU_WIDE OUT preempt next pid/tid: 5556/5559 After: # perf record -a -e intel_pt//u uname Linux [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.868 MB perf.data ] # perf script --no-itrace --show-switch-events | head swapper 0 [005] 6450.567013: PERF_RECORD_SWITCH_CPU_WIDE OUT preempt next pid/tid: 7179/7181 perf 7181 [005] 6450.567014: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 0/0 perf 7181 [005] 6450.567028: PERF_RECORD_SWITCH_CPU_WIDE OUT next pid/tid: 0/0 swapper 0 [005] 6450.567029: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 7179/7181 swapper 0 [005] 6450.571699: PERF_RECORD_SWITCH_CPU_WIDE OUT preempt next pid/tid: 11/11 rcu_sched 11 [005] 6450.571700: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 0/0 rcu_sched 11 [005] 6450.571702: PERF_RECORD_SWITCH_CPU_WIDE OUT next pid/tid: 0/0 swapper 0 [005] 6450.571703: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 11/11 swapper 0 [005] 6450.579703: PERF_RECORD_SWITCH_CPU_WIDE OUT preempt next pid/tid: 11/11 rcu_sched 11 [005] 6450.579704: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 0/0 Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lore.kernel.org/lkml/20200629091955.17090-3-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-07-03perf scripts python: export-to-postgresql.py: Fix struct.pack() int argumentAdrian Hunter
Python 3.8 is requiring that arguments being packed as integers are also integers. Add int() accordingly. Before: $ perf record -e intel_pt//u uname $ perf script --itrace=bep -s ~/libexec/perf-core/scripts/python/export-to-postgresql.py perf_data_db branches calls 2020-06-25 16:09:10.547256 Creating database... 2020-06-25 16:09:10.733185 Writing to intermediate files... Traceback (most recent call last): File "/home/ahunter/libexec/perf-core/scripts/python/export-to-postgresql.py", line 1106, in synth_data cbr(id, raw_buf) File "/home/ahunter/libexec/perf-core/scripts/python/export-to-postgresql.py", line 1058, in cbr value = struct.pack("!hiqiiiiii", 4, 8, id, 4, cbr, 4, MHz, 4, percent) struct.error: required argument is not an integer Fatal Python error: problem in Python trace event handler Python runtime state: initialized Current thread 0x00007f35d3695780 (most recent call first): <no Python frame> Aborted (core dumped) After: $ dropdb perf_data_db $ rm -rf perf_data_db-perf-data $ perf script --itrace=bep -s ~/libexec/perf-core/scripts/python/export-to-postgresql.py perf_data_db branches calls 2020-06-25 16:09:40.990267 Creating database... 2020-06-25 16:09:41.207009 Writing to intermediate files... 2020-06-25 16:09:41.270915 Copying to database... 2020-06-25 16:09:41.382030 Removing intermediate files... 2020-06-25 16:09:41.384630 Adding primary keys 2020-06-25 16:09:41.541894 Adding foreign keys 2020-06-25 16:09:41.677044 Dropping unused tables 2020-06-25 16:09:41.703761 Done Fixes: aba44287a224 ("perf scripts python: export-to-postgresql.py: Export Intel PT power and ptwrite events") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: stable@vger.kernel.org Link: http://lore.kernel.org/lkml/20200629091955.17090-2-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-07-03tools arch: Update arch/x86/lib/memcpy_64.S copy used in 'perf bench mem memcpy'Arnaldo Carvalho de Melo
To bring in the change made in this cset: e3a9e681adb7 ("x86/entry: Fixup bad_iret vs noinstr") This doesn't cause any functional changes to tooling, just a rebuild. Addresses this perf build warning: Warning: Kernel ABI header at 'tools/arch/x86/lib/memcpy_64.S' differs from latest version at 'arch/x86/lib/memcpy_64.S' diff -u tools/arch/x86/lib/memcpy_64.S arch/x86/lib/memcpy_64.S Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-07-03Merge remote-tracking branch 'torvalds/master' into perf/urgentArnaldo Carvalho de Melo
To synchronize UAPI headers. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-07-03gfs2: The freeze glock should never be frozenBob Peterson
Before this patch, some gfs2 code locked the freeze glock with LM_FLAG_NOEXP (Do not freeze) flag, and some did not. We never want to freeze the freeze glock, so this patch makes it consistently use LM_FLAG_NOEXP always. Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2020-07-03gfs2: When freezing gfs2, use GL_EXACT and not GL_NOCACHEBob Peterson
Before this patch, the freeze code in gfs2 specified GL_NOCACHE in several places. That's wrong because we always want to know the state of whether the file system is frozen. There was also a problem with freeze/thaw transitioning the glock from frozen (EX) to thawed (SH) because gfs2 will normally grant glocks in EX to processes that request it in SH mode, unless GL_EXACT is specified. Therefore, the freeze/thaw code, which tried to reacquire the glock in SH mode would get the glock in EX mode, and miss the transition from EX to SH. That made it think the thaw had completed normally, but since the glock was still cached in EX, other nodes could not freeze again. This patch removes the GL_NOCACHE flag to allow the freeze glock to be cached. It also adds the GL_EXACT flag so the glock is fully transitioned from EX to SH, thereby allowing future freeze operations. Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2020-07-03gfs2: read-only mounts should grab the sd_freeze_gl glockBob Peterson
Before this patch, only read-write mounts would grab the freeze glock in read-only mode, as part of gfs2_make_fs_rw. So the freeze glock was never initialized. That meant requests to freeze, which request the glock in EX, were granted without any state transition. That meant you could mount a gfs2 file system, which is currently frozen on a different cluster node, in read-only mode. This patch makes read-only mounts lock the freeze glock in SH mode, which will block for file systems that are frozen on another node. Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2020-07-03gfs2: freeze should work on read-only mountsBob Peterson
Before this patch, function freeze_go_sync, called when promoting the freeze glock, was testing for the SDF_JOURNAL_LIVE superblock flag. That's only set for read-write mounts. Read-only mounts don't use a journal, so the bit is never set, so the freeze never happened. This patch removes the check for SDF_JOURNAL_LIVE for freeze requests but still checks it when deciding whether to flush a journal. Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2020-07-03gfs2: eliminate GIF_ORDERED in favor of list_emptyBob Peterson
In several places, we used the GIF_ORDERED inode flag to determine if an inode was on the ordered writes list. However, since we always held the sd_ordered_lock spin_lock during the manipulation, we can just as easily check list_empty(&ip->i_ordered) instead. This allows us to keep more than one ordered writes list to make journal writing improvements. This patch eliminates GIF_ORDERED in favor of checking list_empty. Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2020-07-03vfio-ccw: Fix a build error due to missing include of linux/slab.hSean Christopherson
Include linux/slab.h to fix a build error due to kfree() being undefined. Fixes: 3f02cb2fd9d2 ("vfio-ccw: Wire up the CRW irq and CRW region") Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Message-Id: <20200703022628.6036-1-sean.j.christopherson@intel.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2020-07-02Merge tag 'm68knommu-for-v5.8-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu Pull m68knommu mm fixes from Greg Ungerer: "Two critical mm related fixes that affect booting of m68k/ColdFire devices. Both fix problems caused by recent system init memblock changes" * tag 'm68knommu-for-v5.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: m68k: mm: fix node memblock init m68k: nommu: register start of the memory with memblock
2020-07-02Merge tag 'devicetree-fixes-for-5.8-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree fixes from Rob Herring: - Sync dtc to upstream to pick up fixes for I2C bus checks and quiet warnings - Various fixes for DT binding check warnings - A couple of build fixes/improvements for binding checks - ReST formatting improvements for writing-schema.rst - Document reference fixes * tag 'devicetree-fixes-for-5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: clock: imx: Fix e-mail address dt-bindings: thermal: k3: Fix the reg property dt-bindings: thermal: Remove soc unit address dt-bindings: display: arm: versatile: Pass the sysreg unit name dt-bindings: usb: aspeed: Remove the leading zeroes dt-bindings: copy process-schema-examples.yaml to process-schema.yaml dt-bindings: do not build processed-schema.yaml for 'make dt_binding_check' dt-bindings: fix error in 'make clean' after 'make dt_binding_check' dt-bindings: mailbox: zynqmp_ipi: fix unit address dt-bindings: bus: uniphier-system-bus: fix warning in example scripts/dtc: Update to upstream version v1.6.0-11-g9d7888cbf19c doc: devicetree: bindings: fix spelling mistake docs: dt: minor adjustments at writing-schema.rst dt: fix reference to olpc,xo1.75-ec.txt dt: Fix broken references to renamed docs dt: fix broken links due to txt->yaml renames dt: update a reference for reneases pcar file renamed to yaml
2020-07-02Merge tag 'for-linus-2020-07-02' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux Pull data race annotation from Christian Brauner: "This contains an annotation patch for a data race in copy_process() reported by KCSAN when reading and writing nr_threads. The data race is intentional and benign. This is obvious from the comment above the relevant code and based on general consensus when discussing this issue. So simply using data_race() to annotate this as an intentional race seems the best option" * tag 'for-linus-2020-07-02' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: fork: annotate data race in copy_process()
2020-07-02Merge tag 'tpmdd-next-v5.8-rc4' of git://git.infradead.org/users/jjs/linux-tpmddLinus Torvalds
Pull tpm fixes from Jarkko Sakkinen: "These are just fixes for bugs found lately. All of them are small scale things here and there, and all of them are for previous kernel releases (the oldest appeared in v2.6.17)" * tag 'tpmdd-next-v5.8-rc4' of git://git.infradead.org/users/jjs/linux-tpmdd: tpm_tis: Remove the HID IFX0102 tpm_tis_spi: Prefer async probe tpm: ibmvtpm: Wait for ready buffer before probing for TPM2 attributes tpm/st33zp24: fix spelling mistake "drescription" -> "description" tpm_tis: extra chip->ops check on error path in tpm_tis_core_init tpm_tis_spi: Don't send anything during flow control tpm: Fix TIS locality timeout problems
2020-07-02Merge tag 'linux-kselftest-fixes-5.8-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kselftest fixes from Shuah Khan: "tpm test fixes from Jarkko Sakkinen" * tag 'linux-kselftest-fixes-5.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests: tpm: Use /bin/sh instead of /bin/bash selftests: tpm: Use 'test -e' instead of 'test -f' Revert "tpm: selftest: cleanup after unseal with wrong auth/policy test"
2020-07-02Merge tag 'linux-kselftest-kunit-fixes-5.8-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kunit fixes from Shuah Khan "Fixes for build and run-times failures. Also includes troubleshooting tips updates to kunit user documentation" * tag 'linux-kselftest-kunit-fixes-5.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: Documentation: kunit: Add some troubleshooting tips to the FAQ kunit: kunit_tool: Fix invalid result when build fails kunit: show error if kunit results are not present kunit: kunit_config: Fix parsing of CONFIG options with space
2020-07-02net/mlx5e: Enhance TX timeout recoveryAya Levin
Upon a TX timeout handle, if the TX reporter was not able to recover from the error, reopen the channels. If tried to reopen channels, do not loop over TX queues for timeout. With that, the reporters state and separation will better expose the driver's state. Signed-off-by: Aya Levin <ayal@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-07-02net/mlx5e: Enhance ICOSQ data on RX reporter's diagnoseAya Levin
When the RQ is in striding RQ mode, it uses the ICOSQ as a helper queue. In this mode, RX reporter dumps more info about the ICOSQ and its related CQ. $ devlink health diagnose pci/0000:00:0b.0 reporter rx Common config: RQ: type: 2 stride size: 2048 size: 8 CQ: stride size: 64 size: 1024 RQs: channel ix: 0 rqn: 2413 HW state: 1 SW state: 5 WQE counter: 7 posted WQEs: 7 cc: 7 CQ: cqn: 1032 HW status: 0 ci: 0 size: 1024 EQ: eqn: 7 irqn: 42 vecidx: 1 ci: 93 size: 2048 ICOSQ: sqn: 2411 HW state: 1 cc: 74 pc: 74 WQE size: 128 CQ: cqn: 1029 cc: 8 size: 128 channel ix: 1 rqn: 2418 HW state: 1 SW state: 5 WQE counter: 7 posted WQEs: 7 cc: 7 CQ: cqn: 1036 HW status: 0 ci: 0 size: 1024 EQ: eqn: 8 irqn: 43 vecidx: 2 ci: 2 size: 2048 ICOSQ: sqn: 2416 HW state: 1 cc: 74 pc: 74 WQE size: 128 CQ: cqn: 1033 cc: 8 size: 128 Signed-off-by: Aya Levin <ayal@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-07-02net/mlx5e: Add EQ info to TX/RX reporter's diagnoseAya Levin
Enhance TX/RX reporter's diagnose to include info about the corresponding EQ. $ devlink health diagnose pci/0000:00:0b.0 reporter rx Common config: RQ: type: 2 stride size: 2048 size: 8 CQ: stride size: 64 size: 1024 RQs: channel ix: 0 rqn: 1713 HW state: 1 SW state: 5 WQE counter: 7 posted WQEs: 7 cc: 7 ICOSQ HW state: 1 CQ: cqn: 1032 HW status: 0 ci: 0 size: 1024 EQ: eqn: 7 irqn: 42 vecidx: 1 ci: 93 size: 2048 channel ix: 1 rqn: 1718 HW state: 1 SW state: 5 WQE counter: 7 posted WQEs: 7 cc: 7 ICOSQ HW state: 1 CQ: cqn: 1036 HW status: 0 ci: 0 size: 1024 EQ: eqn: 8 irqn: 43 vecidx: 2 ci: 2 size: 2048 $ devlink health diagnose pci/0000:00:0b.0 reporter tx Common Config: SQ: stride size: 64 size: 1024 CQ: stride size: 64 size: 1024 SQs: channel ix: 0 tc: 0 txq ix: 0 sqn: 1712 HW state: 1 stopped: false cc: 91 pc: 91 CQ: cqn: 1030 HW status: 0 ci: 91 size: 1024 EQ: eqn: 7 irqn: 42 vecidx: 1 ci: 93 size: 2048 channel ix: 1 tc: 0 txq ix: 1 sqn: 1717 HW state: 1 stopped: false cc: 0 pc: 0 CQ: cqn: 1034 HW status: 0 ci: 0 size: 1024 EQ: eqn: 8 irqn: 43 vecidx: 2 ci: 2 size: 2048 Signed-off-by: Aya Levin <ayal@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-07-02net/mlx5e: Enhance CQ data on diagnose outputAya Levin
Add CQ's consumer index and size to the CQ's diagnose output retruved on RX/TX reporter diadgnose. $ devlink health diagnose pci/0000:00:0b.0 reporter rx Common config: RQ: type: 2 stride size: 2048 size: 8 CQ: stride size: 64 size: 1024 RQs: channel ix: 0 rqn: 2413 HW state: 1 SW state: 5 WQE counter: 7 posted WQEs: 7 cc: 7 ICOSQ HW state: 1 CQ: cqn: 1032 HW status: 0 ci: 0 size: 1024 channel ix: 1 rqn: 2418 HW state: 1 SW state: 5 WQE counter: 7 posted WQEs: 7 cc: 7 ICOSQ HW state: 1 CQ: cqn: 1036 HW status: 0 ci: 0 size: 1024 $ devlink health diagnose pci/0000:00:0b.0 reporter tx Common Config: SQ: stride size: 64 size: 1024 CQ: stride size: 64 size: 1024 SQs: channel ix: 0 tc: 0 txq ix: 0 sqn: 2412 HW state: 1 stopped: false cc: 0 pc: 0 CQ: cqn: 1030 HW status: 0 ci: 0 size: 1024 channel ix: 1 tc: 0 txq ix: 1 sqn: 2417 HW state: 1 stopped: false cc: 5 pc: 5 CQ: cqn: 1034 HW status: 0 ci: 5 size: 1024 Signed-off-by: Aya Levin <ayal@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-07-02net/mlx5e: Rename reporter's helpersAya Levin
Change prefix to match resident file: %s/mlx5e_reporter_cq_diagnose/mlx5e_health_cq_diag_fmsg %s/mlx5e_reporter_cq_common_diagnose/mlx5e_health_cq_common_diag_fmsg %s/mlx5e_reporter_named_obj_nest_start/mlx5e_health_fmsg_named_obj_nest_start %s/mlx5e_reporter_named_obj_nest_end/mlx5e_health_fmsg_named_obj_nest_end Signed-off-by: Aya Levin <ayal@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-07-02net/mlx5e: Add helper to get the RQ WQE counterAya Levin
Add a helper which retrieves the RQ's WQE counter. Use this helper in the RX reporter diagnose callback. $ devlink health diagnose pci/0000:00:0b.0 reporter rx Common config: RQ: type: 2 stride size: 2048 size: 8 CQ: stride size: 64 size: 1024 RQs: channel ix: 0 rqn: 2113 HW state: 1 SW state: 5 WQE counter: 7 posted WQEs: 7 cc: 7 ICOSQ HW state: 1 CQ: cqn: 1032 HW status: 0 channel ix: 1 rqn: 2118 HW state: 1 SW state: 5 WQE counter: 7 posted WQEs: 7 cc: 7 ICOSQ HW state: 1 CQ: cqn: 1036 HW status: 0 Signed-off-by: Aya Levin <ayal@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-07-02net/mlx5e: Add helper to get RQ WQE's headAya Levin
Add helper which retrieves the RQ WQE's head. Use this helper in RX reporter diagnose callback. Signed-off-by: Aya Levin <ayal@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-07-02net/mlx5e: Move RQ helpers to txrx.hAya Levin
Use txrx.h to contain helper function regarding TX/RX. In the coming patches, I will add more RQ helpers. Signed-off-by: Aya Levin <ayal@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-07-02net/mlx5e: Align RX/TX reporters diagnose output formatAya Levin
Change the hierarchy of the RX reporter 'Common config' in the diagnose output to match the 'Common config' of the TX reporter which reflects that CQ is a helper to the traffic queues. Before: $ devlink health diagnose pci/0000:00:0b.0 reporter rx Common config: RQ: type: 2 stride size: 2048 size: 8 CQ: stride size: 64 size: 1024 RQs: ... After: $ devlink health diagnose pci/0000:00:0b.0 reporter rx Common config: RQ: type: 2 stride size: 2048 size: 8 CQ: stride size: 64 size: 1024 RQs: ... Signed-off-by: Aya Levin <ayal@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-07-02net/mlx5e: Remove redundant RQ state queryAya Levin
When received a CQE error, the driver inspect the syndrome given by the firmware. RQ recovery is initiated only as a result of a fatal syndrome; syndrome which set the RQ into an error state. Hence no need to query the RQ state at the beginning of the recovery process. Add additional debug prints before recovering. Signed-off-by: Aya Levin <ayal@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-07-02net/mlx5e: Add a flush timeout defineAya Levin
During queue's recovery, driver waits for flush. The flush timeout is set to 2 seconds. Add a define for this value for the benefit of RX and TX reporters. Signed-off-by: Aya Levin <ayal@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-07-02net/mlx5e: Change reporters create functions to return voidEran Ben Elisha
Creation of devlink health reporters is not fatal for mlx5e instance load. In case of error in reporter's creation, the return value is ignored. Change all reporters creation functions to return void. In addition, with this change, a failure in creating a reporter, will not prevent the driver from trying to create the next reporter in the list. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Reviewed-by: Aya Levin <ayal@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-07-02Merge tag 'nfsd-5.8-1' of git://linux-nfs.org/~bfields/linuxLinus Torvalds
Pull nfsd fixes from Bruce Fields: "Fixes for a umask bug on exported filesystems lacking ACL support, a leak and a module unloading bug in the /proc/fs/nfsd/clients/ code, and a compile warning" * tag 'nfsd-5.8-1' of git://linux-nfs.org/~bfields/linux: SUNRPC: Add missing definition of ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE nfsd: fix nfsdfs inode reference count leak nfsd4: fix nfsdfs reference count loop nfsd: apply umask on fs without ACL support
2020-07-02bpf: Fix build without CONFIG_STACKTRACESong Liu
Without CONFIG_STACKTRACE stack_trace_save_tsk() is not defined. Let get_callchain_entry_for_task() to always return NULL in such cases. Fixes: fa28dcb82a38 ("bpf: Introduce helper bpf_get_task_stack()") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200703024537.79971-1-songliubraving@fb.com
2020-07-03Merge tag 'drm-misc-fixes-2020-07-02' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes * dma-buf: fix a use-after-free bug * sun4i: remove HPD polling Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20200702075143.GA25040@linux-uq9g
2020-07-02hwmon: (pmbus) fix a typo in Kconfig SENSORS_IR35221 optionTao Ren
Fix a typo in SENSORS_IR35221 option: module name should be "ir35221" instead of "ir35521". Fixes: 8991ebd9c9a6 ("hwmon: (pmbus) Add client driver for IR35221") Cc: Samuel Mendoza-Jonas <sam@mendozajonas.com> Signed-off-by: Tao Ren <rentao.bupt@gmail.com> Link: https://lore.kernel.org/r/20200702221349.18139-1-rentao.bupt@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-07-02Merge tag 'block-5.8-2020-07-01' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fixes from Jens Axboe: - Use kvfree_sensitive() for the block keyslot free (Eric) - Sync blk-mq debugfs flags (Hou) - Memory leak fix in virtio-blk error path (Hou) * tag 'block-5.8-2020-07-01' of git://git.kernel.dk/linux-block: virtio-blk: free vblk-vqs in error path of virtblk_probe() block/keyslot-manager: use kvfree_sensitive() blk-mq-debugfs: update blk_queue_flag_name[] accordingly for new flags
2020-07-02Merge tag 'io_uring-5.8-2020-07-01' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull io_uring fixes from Jens Axboe: "One fix in here, for a regression in 5.7 where a task is waiting in the kernel for a condition, but that condition won't become true until task_work is run. And the task_work can't be run exactly because the task is waiting in the kernel, so we'll never make any progress. One example of that is registering an eventfd and queueing io_uring work, and then the task goes and waits in eventfd read with the expectation that it'll get woken (and read an event) when the io_uring request completes. The io_uring request is finished through task_work, which won't get run while the task is looping in eventfd read" * tag 'io_uring-5.8-2020-07-01' of git://git.kernel.dk/linux-block: io_uring: use signal based task_work running task_work: teach task_work_add() to do signal_wake_up()
2020-07-02Merge branch 'sfc-prerequisites-for-EF100-driver-part-3'David S. Miller
Edward Cree says: ==================== sfc: prerequisites for EF100 driver, part 3 Continuing on from [1] and [2], this series assembles the last pieces of the common codebase that will be used by the forthcoming EF100 driver. Patch #1 also adds a minor feature to EF10 (setting MTU on VFs) since EF10 supports the same MCDI extension which that feature will use on EF100. Patches #5 & #7, while they should have no externally-visible effect on driver functionality, change how that functionality is implemented and how the driver represents TXQ configuration internally, so are not mere cleanup/refactoring like most of these prerequisites have (from the perspective of the existing sfc driver) been. Changes in v2: * Patch #1: use efx_mcdi_set_mtu() directly, instead of as a fallback, in the mtu_only case (Jakub) * Patch #3: fix symbol collision in non-modular builds by renaming interrupt_mode to efx_interrupt_mode (kernel test robot) * Patch #6: check for failure of netif_set_real_num_[tr]x_queues (Jakub) * Patch #12: cleaner solution for ethtool drvinfo (Jakub, David) [1]: https://lore.kernel.org/netdev/20200629.173812.1532344417590172093.davem@davemloft.net/T/ [2]: https://lore.kernel.org/netdev/20200630.130923.402514193016248355.davem@davemloft.net/T/ ==================== Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-02sfc_ef100: helper function to set default RSS table of given sizeEdward Cree
Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-02sfc_ef100: NVRAM selftest support codeEdward Cree
We have yet another new scheme for NVRAM, and a corresponding new MCDI. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-02sfc_ef100: populate BUFFER_SIZE_BYTES in INIT_RXQEdward Cree
The QDMA subsystem on EF100 needs this information. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-02sfc_ef100: add EF100 to NIC-revision enumerationEdward Cree
Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-02sfc: get drvinfo driver name from outside the common codeEdward Cree
Since ethtool_common.o will be built into both sfc and sfc_ef100 drivers, it can't use KBUILD_MODNAME directly. Instead, make it reference a string provided by the individual driver code. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-14 17:11:49 +0000