summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-03-03ext4: cleanup to use ext4_group_first_block_no()Akinobu Mita
This is a cleanup and simplification patch which takes some open-coded calculations to calculate the first block number of a group and converts them to use the (already defined) ext4_group_first_block_no() function. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Cc: Andreas Dilger <adilger@sun.com>
2010-03-03Merge branch 'coh' into dmaengineDan Williams
2010-03-03ioat: cleanup ->timer_fn() and ->cleanup_fn() prototypesDan Williams
If the calling convention of ->timer_fn() and ->cleanup_fn() are unified across hardware versions we can drop parameters to ioat_init_channel() and unify ioat_is_dma_complete() implementations. Both ->timer_fn() and ->cleanup_fn() are modified to expect a struct dma_chan pointer. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-03-03ioat3: interrupt coalescingDan Williams
The hardware automatically disables further interrupts after each event until rearmed. This allows a delay to be injected between the occurence of the interrupt and the running of the cleanup routine. The delay is scaled by the descriptor backlog and then written to the INTRDELAY register which specifies the number of microseconds to hold off interrupt delivery after an interrupt event occurs. According to powertop this reduces the interrupt rate from ~5000 intr/s to ~150 intr/s per without affecting throughput (simple dd to a raid6 array). Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-03-03ioat: close potential BUG_ON race in the descriptor cleanup pathDan Williams
Since ioat_cleanup_preamble() and the update of the last completed descriptor are not synchronized there is a chance that two cleanup threads can see descriptors to clean. If the first cleans up all pending descriptors then the second will trigger the BUG_ON. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-03-03Prioritize synchronous signals over 'normal' signalsLinus Torvalds
This makes sure that we pick the synchronous signals caused by a processor fault over any pending regular asynchronous signals sent to use by [t]kill(). This is not strictly required semantics, but it makes it _much_ easier for programs like Wine that expect to find the fault information in the signal stack. Without this, if a non-synchronous signal gets picked first, the delayed asynchronous signal will have its signal context pointing to the new signal invocation, rather than the instruction that caused the SIGSEGV or SIGBUS in the first place. This is not all that pretty, and we're discussing making the synchronous signals more explicit rather than have these kinds of implicit preferences of SIGSEGV and friends. See for example http://bugzilla.kernel.org/show_bug.cgi?id=15395 for some of the discussion. But in the meantime this is a simple and fairly straightforward work-around, and the whole if (x & Y) x &= Y; thing can be compiled into (and gcc does do it) just three instructions: movq %rdx, %rax andl $Y, %eax cmovne %rax, %rdx so it is at least a simple solution to a subtle issue. Reported-and-tested-by: Pavel Vilim <wylda@volny.cz> Acked-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-03staging: dt3155: revert u_long to u64 usageH Hartley Sweeten
Commit 9c1390a923ddb6fba1cf9d7440743369140c6d8a replaced all u_int's with u32 and u_long's with u64. Unfortunately, a u_long is still only 32-bits so they should have been replaced with u32 also. This can be verified by the register definitions in dt3155_io.h. It specifically states that the memory mapped registers are 32-bit. Fix this by changing all the u64 to u32. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-03Staging: comedi: drivers.c: Checkpatch cleanupAndrea Gelmini
WARNING: Use #include <linux/io.h> instead of <asm/io.h> +#include <asm/io.h> WARNING: braces {} are not necessary for any arm of this statement + if (dev->driver) { [...] + } else { [...] WARNING: braces {} are not necessary for single statement blocks + if (insn->insn == INSN_READ) { + data[0] = (new_data[1] >> (chan - base_bitfield_channel)) & 1; + } WARNING: braces {} are not necessary for single statement blocks + if (async->prealloc_buf && async->prealloc_bufsz == new_size) { + return 0; + } WARNING: braces {} are not necessary for single statement blocks + if (async->buf_page_list[i].virt_addr == NULL) { + break; + } WARNING: braces {} are not necessary for single statement blocks + if ((int)(async->buf_write_alloc_count + nbytes - free_end) > 0) { + nbytes = free_end - async->buf_write_alloc_count; + } WARNING: braces {} are not necessary for single statement blocks + if ((int)(async->buf_write_alloc_count + nbytes - free_end) > 0) { + nbytes = 0; + } WARNING: braces {} are not necessary for single statement blocks + if (async->buf_write_ptr >= async->prealloc_bufsz) { + async->buf_write_ptr %= async->prealloc_bufsz; + } Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-03Staging: arlan: arlan.h: more Checkpatch cleanupAndrea Gelmini
ERROR: do not use C99 // comments + volatile u_char radioModule;// shows EEPROM, can be overridden at 0x111 ERROR: do not use C99 // comments + volatile u_char defaultChannelSet; // shows EEProm, can be overriiden at 0x10A Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-03Staging: arlan: Makefile: Checkpatch cleanupAndrea Gelmini
ERROR: trailing whitespace +obj-$(CONFIG_ARLAN) += arlan.o $ Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-03Staging: rt3070: md4.h: Checkpatch cleanupAndrea Gelmini
WARNING: space prohibited between function name and open parenthesis '(' +void MD4Init (MD4_CTX *); WARNING: space prohibited between function name and open parenthesis '(' +void MD4Update (MD4_CTX *, u8 *, UINT); WARNING: space prohibited between function name and open parenthesis '(' +void MD4Final (u8 [16], MD4_CTX *); ERROR: do not use C99 // comments +#endif //__MD4_H__ Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-03Staging: arlan: arlan.h: Checkpatch cleanupAndrea Gelmini
ERROR: trailing whitespace + * Copyright (C) 1998 Elmer.Joandi@ut.ee, +37-255-13500^I$ WARNING: Use #include <linux/io.h> instead of <asm/io.h> +#include <asm/io.h> ERROR: do not use C99 // comments +//#define ARLAN_DEBUGGING 1 ERROR: "foo * bar" should be "foo *bar" +extern int arlan_command(struct net_device * dev, int command); ERROR: trailing whitespace + $ ERROR: trailing whitespace +#define IFDEBUG( L ) if ( (L) & arlan_debug ) $ ERROR: space prohibited after that open parenthesis '(' +#define IFDEBUG( L ) if ( (L) & arlan_debug ) ERROR: space prohibited before that close parenthesis ')' +#define IFDEBUG( L ) if ( (L) & arlan_debug ) ERROR: trailing whitespace +#define ARLAN_FAKE_HDR_LEN 12 $ ERROR: space required after that ',' (ctx:VxV) + #define ARLAN_DEBUG(a,b) printk(KERN_DEBUG a, b) ^ ERROR: trailing whitespace +^I#define ARLAN_DEBUG(a,b) $ ERROR: space required after that ',' (ctx:VxV) + #define ARLAN_DEBUG(a,b) ^ ERROR: open brace '{' following struct go on the same line +struct arlan_shmem +{ ERROR: trailing whitespace + /* Header Signature */ $ ERROR: trailing whitespace + $ ERROR: trailing whitespace + $ ERROR: trailing whitespace + $ ERROR: trailing whitespace + $ ERROR: trailing whitespace + int systemId; $ ERROR: open brace '{' following struct go on the same line +struct TxParam +{ ERROR: "foo * bar" should be "foo *bar" + struct arlan_shmem __iomem * card; ERROR: "foo * bar" should be "foo *bar" + struct arlan_shmem * conf; ERROR: trailing whitespace + struct arlan_conf_stru * Conf;^I $ ERROR: "foo * bar" should be "foo *bar" + struct arlan_conf_stru * Conf; ERROR: trailing whitespace + $ ERROR: space required after that ',' (ctx:VxV) +#define READSHM(to,from,atype) {\ ^ ERROR: space required after that ',' (ctx:VxV) +#define READSHM(to,from,atype) {\ ^ ERROR: space required after that ',' (ctx:VxO) + memcpy_fromio(&(tmp),&(from),sizeof(atype));\ ^ ERROR: space required before that '&' (ctx:OxV) + memcpy_fromio(&(tmp),&(from),sizeof(atype));\ ^ ERROR: space required after that ',' (ctx:VxV) + memcpy_fromio(&(tmp),&(from),sizeof(atype));\ ^ ERROR: space required after that ',' (ctx:VxV) +#define READSHMEM(from,atype)\ ^ ERROR: space required after that ',' (ctx:VxV) +#define WRITESHM(to,from,atype) \ ^ ERROR: space required after that ',' (ctx:VxV) +#define WRITESHM(to,from,atype) \ ^ ERROR: space required after that ',' (ctx:VxO) + memcpy_toio(&(to),&tmpSHM,sizeof(atype));\ ^ ERROR: space required before that '&' (ctx:OxV) + memcpy_toio(&(to),&tmpSHM,sizeof(atype));\ ^ ERROR: space required after that ',' (ctx:VxV) + memcpy_toio(&(to),&tmpSHM,sizeof(atype));\ ^ ERROR: space required after that ',' (ctx:VxV) +#define DEBUGSHM(levelSHM,stringSHM,stuff,atype) \ ^ ERROR: space required after that ',' (ctx:VxV) +#define DEBUGSHM(levelSHM,stringSHM,stuff,atype) \ ^ ERROR: space required after that ',' (ctx:VxV) +#define DEBUGSHM(levelSHM,stringSHM,stuff,atype) \ ^ ERROR: space required after that ',' (ctx:VxO) + memcpy_fromio(&tmpSHM,&(stuff),sizeof(atype));\ ^ ERROR: space required before that '&' (ctx:OxV) + memcpy_fromio(&tmpSHM,&(stuff),sizeof(atype));\ ^ ERROR: space required after that ',' (ctx:VxV) + memcpy_fromio(&tmpSHM,&(stuff),sizeof(atype));\ ^ ERROR: space required after that ',' (ctx:VxV) + IFDEBUG(levelSHM) printk(stringSHM,tmpSHM);\ ^ ERROR: space required after that ',' (ctx:VxO) + writeb(val,&(to)) ^ ERROR: space required before that '&' (ctx:OxV) + writeb(val,&(to)) ^ ERROR: space required after that ',' (ctx:VxO) + writew(val,&(to)) ^ ERROR: space required before that '&' (ctx:OxV) + writew(val,&(to)) ^ ERROR: space required after that ',' (ctx:VxO) + writel(val,&(to)) ^ ERROR: space required before that '&' (ctx:OxV) + writel(val,&(to)) ^ ERROR: space prohibited after that open parenthesis '(' + ( ( READSHMB(((struct arlan_private *)netdev_priv(dev))->card->registrationMode) > 0) && \ ERROR: space prohibited after that open parenthesis '(' + ( READSHMB(((struct arlan_private *)netdev_priv(dev))->card->registrationStatus) == 0) ) ERROR: space prohibited before that close parenthesis ')' + ( READSHMB(((struct arlan_private *)netdev_priv(dev))->card->registrationStatus) == 0) ) ERROR: code indent should use tabs where possible + ^IREADSHMB(((struct arlan_private *)netdev_priv(dev))->card->cntrlRegImage)$ ERROR: space required before the open brace '{' +#define writeControlRegister(dev, v){\ ERROR: space required after that ',' (ctx:WxV) + WRITESHMB(((struct arlan_private *)netdev_priv(dev))->card->cntrlRegImage ,((v) &0xF) );\ ^ ERROR: need consistent spacing around '&' (ctx:WxV) + WRITESHMB(((struct arlan_private *)netdev_priv(dev))->card->cntrlRegImage ,((v) &0xF) );\ ^ ERROR: space prohibited before that close parenthesis ')' + WRITESHMB(((struct arlan_private *)netdev_priv(dev))->card->cntrlRegImage ,((v) &0xF) );\ ERROR: space required after that ',' (ctx:WxV) + WRITESHMB(((struct arlan_private *)netdev_priv(dev))->card->controlRegister ,(v) );} ^ ERROR: space required after that ';' (ctx:VxV) + WRITESHMB(((struct arlan_private *)netdev_priv(dev))->card->controlRegister ,(v) );} ^ ERROR: space prohibited before that close parenthesis ')' + WRITESHMB(((struct arlan_private *)netdev_priv(dev))->card->controlRegister ,(v) );} WARNING: suspect code indent for conditional statements (3, 6) + if (cr & ARLAN_CHANNEL_ATTENTION){ \ + writeControlRegister(dev, (cr & ~ARLAN_CHANNEL_ATTENTION));\ ERROR: space required before the open brace '{' + if (cr & ARLAN_CHANNEL_ATTENTION){ \ ERROR: space required after that close brace '}' + }else \ ERROR: space required before the open brace '{' +#define clearChannelAttention(dev){ \ ERROR: space required after that ',' (ctx:VxV) + writeControlRegister(dev,readControlRegister(dev) & ~ARLAN_CHANNEL_ATTENTION);} ^ ERROR: space required after that ';' (ctx:VxV) + writeControlRegister(dev,readControlRegister(dev) & ~ARLAN_CHANNEL_ATTENTION);} ^ ERROR: space required after that ',' (ctx:VxV) + writeControlRegister(dev,readControlRegister(dev) | ARLAN_RESET);} ^ ERROR: space required after that ';' (ctx:VxV) + writeControlRegister(dev,readControlRegister(dev) | ARLAN_RESET);} ^ ERROR: space required after that ',' (ctx:VxV) + writeControlRegister(dev,readControlRegister(dev) & ~ARLAN_RESET);} ^ ERROR: space required after that ';' (ctx:VxV) + writeControlRegister(dev,readControlRegister(dev) & ~ARLAN_RESET);} ^ ERROR: space required before the open brace '{' +#define setInterruptEnable(dev){\ ERROR: space required after that ',' (ctx:VxV) + writeControlRegister(dev,readControlRegister(dev) | ARLAN_INTERRUPT_ENABLE) ;} ^ ERROR: space required after that ';' (ctx:WxV) + writeControlRegister(dev,readControlRegister(dev) | ARLAN_INTERRUPT_ENABLE) ;} ^ ERROR: space required before the open brace '{' +#define clearInterruptEnable(dev){\ ERROR: space required after that ',' (ctx:VxV) + writeControlRegister(dev,readControlRegister(dev) & ~ARLAN_INTERRUPT_ENABLE) ;} ^ ERROR: space required after that ';' (ctx:WxV) + writeControlRegister(dev,readControlRegister(dev) & ~ARLAN_INTERRUPT_ENABLE) ;} ^ ERROR: space required before the open brace '{' +#define setClearInterrupt(dev){\ ERROR: space required after that ',' (ctx:VxV) + writeControlRegister(dev,readControlRegister(dev) | ARLAN_CLEAR_INTERRUPT) ;} ^ ERROR: space required after that ';' (ctx:WxV) + writeControlRegister(dev,readControlRegister(dev) | ARLAN_CLEAR_INTERRUPT) ;} ^ ERROR: space required before the open brace '{' +#define clearClearInterrupt(dev){\ ERROR: space required after that ',' (ctx:VxV) + writeControlRegister(dev,readControlRegister(dev) & ~ARLAN_CLEAR_INTERRUPT);} ^ ERROR: space required after that ';' (ctx:VxV) + writeControlRegister(dev,readControlRegister(dev) & ~ARLAN_CLEAR_INTERRUPT);} ^ ERROR: space required before the open brace '{' +#define setPowerOff(dev){\ ERROR: space required after that ',' (ctx:VxV) + writeControlRegister(dev,readControlRegister(dev) | (ARLAN_POWER && ARLAN_ACCESS));\ ^ ERROR: space required after that ',' (ctx:VxV) + writeControlRegister(dev,readControlRegister(dev) & ~ARLAN_ACCESS);} ^ ERROR: space required after that ';' (ctx:VxV) + writeControlRegister(dev,readControlRegister(dev) & ~ARLAN_ACCESS);} ^ ERROR: space required before the open brace '{' +#define setPowerOn(dev){\ ERROR: space required after that ',' (ctx:VxV) + writeControlRegister(dev,readControlRegister(dev) & ~(ARLAN_POWER)); } ^ ERROR: space required before the open brace '{' +#define arlan_lock_card_access(dev){\ ERROR: space required after that ',' (ctx:VxV) + writeControlRegister(dev,readControlRegister(dev) & ~ARLAN_ACCESS);} ^ ERROR: space required after that ';' (ctx:VxV) + writeControlRegister(dev,readControlRegister(dev) & ~ARLAN_ACCESS);} ^ ERROR: space required before the open brace '{' +#define arlan_unlock_card_access(dev){\ ERROR: trailing whitespace + writeControlRegister(dev,readControlRegister(dev) | ARLAN_ACCESS ); } $ ERROR: space required after that ',' (ctx:VxV) + writeControlRegister(dev,readControlRegister(dev) | ARLAN_ACCESS ); } ^ ERROR: space prohibited before that close parenthesis ')' + writeControlRegister(dev,readControlRegister(dev) | ARLAN_ACCESS ); } ERROR: trailing whitespace + $ ERROR: trailing whitespace + $ Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-03Staging: comedi: dt2801.c: Checkpatch cleanupAndrea Gelmini
ERROR: code indent should use tabs where possible + 0 = [-10,10]$ ERROR: code indent should use tabs where possible + 0 = [-10,10]$ WARNING: braces {} are not necessary for single statement blocks + if (stat & (DT_S_COMPOSITE_ERROR | DT_S_READY)) { + return stat; + } WARNING: braces {} are not necessary for single statement blocks + if (stat & DT_S_COMPOSITE_ERROR) { + return stat; + } WARNING: braces {} are not necessary for single statement blocks + if (stat & DT_S_READY) { + return 0; + } WARNING: braces {} are not necessary for single statement blocks + if (stat & DT_S_COMPOSITE_ERROR) { + return stat; + } WARNING: braces {} are not necessary for single statement blocks + if (stat & DT_S_READY) { + return 0; + } WARNING: braces {} are not necessary for single statement blocks + if (!(stat & DT_S_READY)) { + printk("dt2801: !ready in dt2801_writecmd(), ignoring\n"); + } WARNING: braces {} are not necessary for single statement blocks + if (!timeout) { + printk("dt2801: timeout 1 status=0x%02x\n", stat); + } WARNING: braces {} are not necessary for single statement blocks + if (!timeout) { + printk("dt2801: timeout 2 status=0x%02x\n", stat); + } WARNING: braces {} are not necessary for any arm of this statement + if (stat == -ETIME) { [...] + } else { [...] Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-03Staging: comedi: dmm32at.c: Checkpatch cleanupAndrea Gelmini
WARNING: braces {} are not necessary for any arm of this statement + if (data[0] == COMEDI_OUTPUT) { [...] + } else { [...] Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-03Staging: comedi: cb_pcimdas.c: more Checkpatch cleanupAndrea Gelmini
WARNING: braces {} are not necessary for single statement blocks + if (fifo_empty) { + break; + } WARNING: braces {} are not necessary for single statement blocks + if (irq) { + printk(", irq %u", irq); + } Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-03Staging: comedi: das6402.c: Checkpatch cleanupAndrea Gelmini
ERROR: Macros with complex values should be enclosed in parenthesis +#define N_WORDS 3000*64 Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-03Staging: comedi: hwdrv_apci3120.c: Checkpatch cleanupAndrea Gelmini
ERROR: do not initialise statics to 0 or NULL +static unsigned int ui_Temp = 0; WARNING: braces {} are not necessary for any arm of this statement + if (data[1]) { [...] + } else [...] WARNING: braces {} are not necessary for single statement blocks + for (i = 0; i < devpriv->ui_AiNbrofChannels; i++) { + devpriv->ui_AiChannelList[i] = data[4 + i]; + } ERROR: that open brace { should be on the previous line + } else /* EOC */ + { WARNING: braces {} are not necessary for any arm of this statement + if (data[1]) { [...] + } else { [...] ERROR: that open brace { should be on the previous line + if (insn->unused[0] == 222) /* second insn read */ + { WARNING: braces {} are not necessary for single statement blocks + for (i = 0; i < insn->n; i++) { + data[i] = devpriv->ui_AiReadData[i]; + } WARNING: braces {} are not necessary for single statement blocks + if (cmd->start_src != TRIG_NOW && cmd->start_src != TRIG_EXT) { + err++; + } ERROR: that open brace { should be on the previous line + if (cmd->scan_begin_src == TRIG_TIMER) /* Test Delay timing */ + { ERROR: that open brace { should be on the previous line + if (cmd->convert_src == TRIG_TIMER) /* Test Acquisition timing */ + { WARNING: braces {} are not necessary for any arm of this statement + if (cmd->stop_src == TRIG_COUNT) { [...] + } else { [...] WARNING: braces {} are not necessary for single statement blocks + if (devpriv->b_ExttrigEnable == APCI3120_ENABLE) { + i_APCI3120_ExttrigEnable(dev); /* activate EXT trigger */ + } WARNING: braces {} are not necessary for single statement blocks + if (dmalen0 > (devpriv->ui_AiDataLength)) { + dmalen0 = devpriv->ui_AiDataLength; + } WARNING: braces {} are not necessary for single statement blocks + if (dmalen1 > (devpriv->ui_AiDataLength)) { + dmalen1 = devpriv->ui_AiDataLength; + } WARNING: braces {} are not necessary for any arm of this statement + if (CR_RANGE(chanlist[i]) < APCI3120_BIPOLAR_RANGES) { [...] + } else { [...] ERROR: that open brace { should be on the previous line + if (devpriv->b_EocEosInterrupt == APCI3120_ENABLE) /* enable this in without DMA ??? */ + { ERROR: that open brace { should be on the previous line + if (data[0] == APCI3120_TIMER) /* initialize timer */ + { ERROR: that open brace { should be on the previous line + } else /* Initialize Watch dog */ + { ERROR: that open brace { should be on the previous line + if (data[0] == 2) /* write new value */ + { ERROR: that open brace { should be on the previous line + if (devpriv->b_Timer2Mode == APCI3120_TIMER) /* start timer */ + { ERROR: that open brace { should be on the previous line + } else /* start watch dog */ + { ERROR: that open brace { should be on the previous line + if (devpriv->b_Timer2Mode == APCI3120_TIMER) /* start timer */ + { ERROR: that open brace { should be on the previous line + } else /* Read watch dog status */ + { WARNING: braces {} are not necessary for single statement blocks + if (!devpriv->b_OutputMemoryStatus) { + ui_Temp = 0; + + } /* if(!devpriv->b_OutputMemoryStatus ) */ ERROR: code indent should use tabs where possible + data[0] Value to be written$ ERROR: code indent should use tabs where possible + data[1] :1 Set digital o/p ON$ ERROR: code indent should use tabs where possible + data[1] 2 Set digital o/p OFF with memory ON$ ERROR: that open brace { should be on the previous line + if (ui_Range) /* if 1 then unipolar */ + { ERROR: that open brace { should be on the previous line + } else /* if 0 then bipolar */ + { ERROR: that open brace { should be on the previous line + do /* Waiting of DA_READY BIT */ + { Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-03Staging: comedi: das08_cs.c: Checkpatch cleanupAndrea Gelmini
ERROR: code indent should use tabs where possible + NONE$ ERROR: do not initialise statics to 0 or NULL +static struct pcmcia_device *cur_dev = NULL; Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-03Staging: comedi: contec_pci_dio.c: Checkpatch cleanupAndrea Gelmini
WARNING: braces {} are not necessary for single statement blocks + if (dev->iobase) { + comedi_pci_disable(devpriv->pci_dev); + } Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-03Staging: comedi: cb_pcimdda.c: Checkpatch cleanupAndrea Gelmini
WARNING: braces {} are not necessary for any arm of this statement + if (it->options[2]) { [...] + } else { [...] WARNING: braces {} are not necessary for single statement blocks + if (devpriv->registers) { + comedi_pci_disable(devpriv->pci_dev); + } Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-03Staging: comedi: cb_pcimdas.c: Checkpatch cleanupAndrea Gelmini
WARNING: braces {} are not necessary for any arm of this statement + if (thisboard->has_dio) { [...] + } else { [...] WARNING: braces {} are not necessary for single statement blocks + if (devpriv->BADR0) { + comedi_pci_disable(devpriv->pci_dev); + } Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-03Staging: comedi: cb_pcidio.c: Checkpatch cleanupAndrea Gelmini
WARNING: braces {} are not necessary for single statement blocks + if (devpriv->dio_reg_base) { + comedi_pci_disable(devpriv->pci_dev); + } WARNING: braces {} are not necessary for single statement blocks + for (i = 0; i < thisboard->n_8255; i++) { + subdev_8255_cleanup(dev, dev->subdevices + i); + } Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-03Staging: comedi: cb_pcidda.c: Checkpatch cleanupAndrea Gelmini
WARNING: braces {} are not necessary for single statement blocks + if (devpriv->dac) { + comedi_pci_disable(devpriv->pci_dev); + } WARNING: braces {} are not necessary for single statement blocks + if (inw_p(devpriv->dac + DACALIBRATION1) & SERIAL_OUT_BIT) { + value |= 1 << (value_width - i); + } WARNING: braces {} are not necessary for single statement blocks + for (i = 0; i < max_num_caldacs; i++) { + cal2_bits |= DESELECT_CALDAC_BIT(i); + } WARNING: braces {} are not necessary for single statement blocks + for (i = 0; i < max_num_caldacs; i++) { + cal2_bits |= DESELECT_CALDAC_BIT(i); + } Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-03Staging: comedi: cb_pcidas.c: Checkpatch cleanupAndrea Gelmini
ERROR: "foo * bar" should be "foo *bar" + uint8_t * data); WARNING: braces {} are not necessary for single statement blocks + if (devpriv->s5933_config) { + comedi_pci_disable(devpriv->pci_dev); + } WARNING: braces {} are not necessary for single statement blocks + if (cmd->stop_src == TRIG_COUNT) { + devpriv->count = cmd->chanlist_len * cmd->stop_arg; + } WARNING: braces {} are not necessary for single statement blocks + if (cmd->stop_src == TRIG_COUNT) { + devpriv->ao_count = cmd->chanlist_len * cmd->stop_arg; + } WARNING: braces {} are not necessary for single statement blocks + if (cmd->stop_src == TRIG_COUNT) { + devpriv->ao_count -= num_points; + } WARNING: braces {} are not necessary for single statement blocks + if (dev->attached == 0) { + return IRQ_NONE; + } WARNING: braces {} are not necessary for single statement blocks + if ((status & (INT | EOAI | LADFUL | DAHFI | DAEMI)) == 0) { + comedi_error(dev, "spurious interrupt"); + } WARNING: braces {} are not necessary for single statement blocks + if (status & (DAHFI | DAEMI)) { + handle_ao_interrupt(dev, status); + } WARNING: braces {} are not necessary for single statement blocks + if (async->cmd.stop_src == TRIG_COUNT) { + devpriv->ao_count -= num_points; + } ERROR: "foo * bar" should be "foo *bar" + uint8_t * data) Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-03Staging: comedi: hwdrv_apci1032.c: Checkpatch cleanupAndrea Gelmini
ERROR: do not initialise externals to 0 or NULL +unsigned int ui_InterruptStatus = 0; WARNING: braces {} are not necessary for single statement blocks + else { + outl(0x6, devpriv->iobase + APCI1032_DIGITAL_IP_IRQ); + } /* else if(data[1] == ADDIDATA_OR) */ WARNING: braces {} are not necessary for single statement blocks + if (data[1] == 1) { + *data = ui_InterruptStatus; + } /* if(data[1]==1) */ Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-03Staging: comedi: addi_common.h: Checkpatch cleanupAndrea Gelmini
ERROR: code indent should use tabs where possible + const struct comedi_lrange *pr_AiRangelist;^I/* rangelist for A/D */$ ERROR: code indent should use tabs where possible + const struct comedi_lrange *pr_AoRangelist;^I/* rangelist for D/A */$ Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-03Staging: comedi: addi_amcc_S5920.c: Checkpatch cleanupAndrea Gelmini
WARNING: braces {} are not necessary for any arm of this statement + if (i_Counter == 0) { [...] + } else { [...] Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-03Staging: comedi: amplc_pci224.c: coding style cleanupsd binderman
Signed-off-by: David Binderman <dcb314@hotmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-03Staging: Cleanup useless headersAlessio Igor Bogani
BKL isn't anymore present into these files thus it is no necessary still include smp_lock.h. Signed-off-by: Alessio Igor Bogani <abogani@texware.it> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-03Staging: rtl8192su: use list_for_each_safe() in ieee80211_crypto_deinitFlorian Schilhabel
Signed-off-by: Florian Schilhabel <florian.c.schilhabel@googlemail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-03Staging: rtl8192su: re-enable tx-statsFlorian Schilhabel
currently, interface statistics look like this: wlan0 Link encap:Ethernet HWaddr xx:xx:xx:xx:xx:xx inet addr:xxx.xxx.xxx.xxx Bcast:xxx.xxx.xxx.xxx Mask:xxx.xxx.xxx.xxx UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:435 errors:0 dropped:1 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:456758 (446.0 Kb) TX bytes:0 (0.0 b) after re-enabling the tx-stats it looks like this: wlan0 Link encap:Ethernet HWaddr xx:xx:xx:xx:xx:xx inet addr:xxx.xxx.xxx.xxx Bcast:xxx.xxx.xxx.xxx Mask:xxx.xxx.xxx.xxx UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1269 errors:0 dropped:1 overruns:0 frame:0 TX packets:1049 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1667442 (1.5 Mb) TX bytes:82606 (80.6 Kb) Signed-off-by: Florian Schilhabel <florian.c.schilhabel@googlemail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-03Staging: rtl8192su: fix for rtl819xU:Error TX URB for zero byte xxx, error -2Florian Schilhabel
according to 'linux device drivers', ENOENT, ECONNRESET, ESHUTDOWN are not real transmission errors. also, a little cosmetics. Signed-off-by: Florian Schilhabel <florian.c.schilhabel@googlemail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-03Staging: rtl8192su: Remove Firmware from r8192SU_HWImg.cFlorian Schilhabel
Because the Firmware is loaded from RTL8192SU/rtl8192sfw.bin, it it save, to remove it from r8192SU_HWImg.c Signed-off-by: Florian Schilhabel <florian.c.schilhabel@googlemail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-03Staging: make drivers use spin_lock_init()Sven-Thorsten Dietrich
This fixes some RT-triggered compile errors and typos. Signed-off-by: Sven-Thorsten Dietrich <sdietrich@novell.com> Acked-by: Marek Lindner <lindner_marek@yahoo.de> Acked-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-03Staging: crystalhd: Misc improvements for crystalhd_lnx.cAmeya Palande
This patch does following improvements: 1. Follow kernel style for comments 2. Reorganize code for readability improvement 3. Use PCI helper macros 4. Use __devinit, __devexit, __devexit_p at necessary places 5. Mark functions and data as static when it is not exported Signed-off-by: Ameya Palande <2ameya@gmail.com> Cc: Naren Sankar <nsankar@broadcom.com> Cc: Jarod Wilson <jarod@wilsonet.com> Cc: Scott Davilla <davilla@4pi.com> Cc: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-03Staging: wlan-ng: Fixed line length issues in prism2usb.cJim Dog
This is a patch to the prism2usb.c that fixes one line which was over the 80 character limit by wrapping it to a new line and removes a commented out configuration for a ZyDAS ZD1201 device since support for this device with this driver is now deprecated. Signed-off-by: Jim Dog <jimdog@northern-indymedia.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-03Staging/pohmelfs: fix write_inode parameter warningRandy Dunlap
sparse warns that: drivers/staging/pohmelfs/inode.c:1797: warning: initialization from incompatible pointer type so fix pohmelfs_write_inode() to have the expected parameters. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-03Staging: fix wlan-ng printk format warningRandy Dunlap
Fix prism2fw.c printk format warning: drivers/staging/wlan-ng/prism2fw.c:209: warning: format '%d' expects type 'int', but argument 3 has type 'size_t' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-03Staging: rtl8192* needs semaphore.hRandy Dunlap
The rtl8192* drivers in staging use semaphores, so they need to #include <linux/semaphore.h>. (similar to staging-rtl8187se-needs-semaphore.h.patch) drivers/staging/rtl8192e/ieee80211/ieee80211.h:2038: error: field 'ips_sem' has incomplete type drivers/staging/rtl8192e/ieee80211/ieee80211.h:2249: error: field 'wx_sem' has incomplete type drivers/staging/rtl8192e/ieee80211/ieee80211.h:2250: error: field 'scan_sem' has incomplete type drivers/staging/rtl8192e/ieee80211/ieee80211_softmac.c:442: error: implicit declaration of function 'down' drivers/staging/rtl8192e/ieee80211/ieee80211_softmac.c:500: error: implicit declaration of function 'up' drivers/staging/rtl8192e/ieee80 211/ieee80211_softmac.c:3165: error: implicit declaration of function 'sema_init' drivers/staging/rtl8192su/ieee80211/ieee80211.h:1330: error: field 'wx_sem' has incomplete type drivers/staging/rtl8192su/ieee80211/ieee80211.h:1331: error: field 'scan_sem' has incomplete type drivers/staging/rtl8192u/ieee80211/ieee80211.h:2010: error: field 'wx_sem' has incomplete type drivers/staging/rtl8192u/ieee80211/ieee80211.h:2011: error: field 'scan_sem' has incomplete type Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-03Staging: line6: variax.c: fixed a space a "x ? a : b" coding style issueSylvain Trias
Fixed a coding style issue. Signed-off-by: Sylvain Trias <bozo@nobodix.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-03Staging: comedi: Increased timeout for digital output dma loadingFrank Mori Hess
Increased timeout for digital output dma loading, due to report of it being too short for some hardware. Signed-off-by: Frank Mori Hess <fmhess@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-03Staging: comedi: serial2002: Fix filp_open usageOGAWA Hirofumi
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-03Staging: comedi: amplc_pc236: Checkpatch cleanupsBenjamin Adolphi
This fixes all checkpatch issues in the amplc_pc236 comedi driver. Signed-off-by: Benjamin Adolphi <b.adolphi@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-03Staging: comedi: amplc_dio200: Checkpatch cleanupsBenjamin Adolphi
This fixes all checkpatch issues in the amplc_dio200 comedi driver. Signed-off-by: Benjamin Adolphi <b.adolphi@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-03Staging: comedi: aio_iiro_16: Checkpatch cleanupsBenjamin Adolphi
This fixes all checkpatch issues in the aio_iiro_16 comedi driver. Signed-off-by: Benjamin Adolphi <b.adolphi@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-03Staging: comedi: fix coding style issues in ni_labpc.cStewart Robertson
This is a patch to the ni_labpc.c file that fixes the brace warnings and comments over 80 characters found by the checkpatch.pl tool. Some code still goes over 80 characters because I didn't know what to do with it. Signed-off-by: Stewart Robertson <stewart_r@aliencamel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-03Staging: batman-adv: fix module initializationMarek Lindner
Make sure that batman-adv does not process packets before its initialization is complete. Some sanity checks added to the receiver function. Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-03Staging: batman-adv: avoid crash on memory allocation errorMarek Lindner
skb_share_check() returns NULL if it can't allocate more memory but it still frees the skbuff. Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-03Staging: batman-adv: Fix skbuff leak in VIS code.Andrew Lunn
The vis code takes a copy of the data inside the skbuf if it is interesting for us, so we always need to release the skbuf. Reported-by: Linus Luessing <linus.luessing@web.de> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-03Staging: batman-adv: atomic variable for vis-srv activationLinus Luessing
This fixes the bug discovered by Marek Lindner which did not allow turning on the vis-server before an interface has been added. With this patch we are using a global atomic variable for activating and deactiating the vis-server-mode, which can be used before inserting an interface. Signed-off-by: Linus Luessing <linus.luessing@web.de> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit (git 2.34.1) at 2025-09-13 00:23:32 +0000