| Age | Commit message (Collapse) | Author |
|---|
|
Commit under Fixes adds ntuple rules but never deletes them.
Fixes: 29a4bc1fe961 ("selftest: extend test_rss_context_queue_reconfigure for action addition")
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20250201013040.725123-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The info.flow_type is for RXFH commands, ntuple flow_type is inside
the flow spec. The check currently does nothing, as info.flow_type
is 0 (or even uninitialized by user space) for ETHTOOL_SRXCLSRLINS.
Fixes: 9e43ad7a1ede ("net: ethtool: only allow set_rxnfc with rss + ring_cookie if driver opts in")
Reviewed-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20250201013040.725123-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit ec6e57beaf8b ("ethtool: rss: don't report key if device
doesn't support it") intended to stop reporting key fields for
additional rss contexts if device has a global hashing key.
Later we added dump support and the filtering wasn't properly
added there. So we end up reporting the key fields in dumps
but not in dos:
# ./pyynl/cli.py --spec netlink/specs/ethtool.yaml --do rss-get \
--json '{"header": {"dev-index":2}, "context": 1 }'
{
"header": { ... },
"context": 1,
"indir": [0, 1, 2, 3, ...]]
}
# ./pyynl/cli.py --spec netlink/specs/ethtool.yaml --dump rss-get
[
... snip context 0 ...
{ "header": { ... },
"context": 1,
"indir": [0, 1, 2, 3, ...],
-> "input_xfrm": 255,
-> "hfunc": 1,
-> "hkey": "000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000"
}
]
Hide these fields correctly.
The drivers/net/hw/rss_ctx.py selftest catches this when run on
a device with single key, already:
# Check| At /root/./ksft-net-drv/drivers/net/hw/rss_ctx.py, line 381, in test_rss_context_dump:
# Check| ksft_ne(set(data.get('hkey', [1])), {0}, "key is all zero")
# Check failed {0} == {0} key is all zero
not ok 8 rss_ctx.test_rss_context_dump
Fixes: f6122900f4e2 ("ethtool: rss: support dumping RSS contexts")
Reviewed-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20250201013040.725123-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
kthread_affine_preferred() incorrectly returns 0 instead of -ENOMEM
when kzalloc() fails. Return 'ret' to ensure the correct error code is
propagated.
Fixes: 4d13f4304fa4 ("kthread: Implement preferred affinity")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202501301528.t0cZVbnq-lkp@intel.com/
Signed-off-by: Yu-Chun Lin <eleanor15x@gmail.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
|
|
A null dereference or oops exception will eventually occur when qla1280.c
driver is compiled with DEBUG_QLA1280 enabled and ql_debug_level > 2. I
think its clear from the code that the intention here is sg_dma_len(s) not
length of sg_next(s) when printing the debug info.
Signed-off-by: Magnus Lindholm <linmag7@gmail.com>
Link: https://lore.kernel.org/r/20250125095033.26188-1-linmag7@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
There is currently no mechanism to return error from query responses.
Return the error and print the corresponding error message with it.
Signed-off-by: Seunghui Lee <sh043.lee@samsung.com>
Link: https://lore.kernel.org/r/20250118023808.24726-1-sh043.lee@samsung.com
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
In StorVSC, payload->range.len is used to indicate if this SCSI command
carries payload. This data is allocated as part of the private driver data
by the upper layer and may get passed to lower driver uninitialized.
For example, the SCSI error handling mid layer may send TEST_UNIT_READY or
REQUEST_SENSE while reusing the buffer from a failed command. The private
data section may have stale data from the previous command.
If the SCSI command doesn't carry payload, the driver may use this value as
is for communicating with host, resulting in possible corruption.
Fix this by always initializing this value.
Fixes: be0cf6ca301c ("scsi: storvsc: Set the tablesize based on the information given by the host")
Cc: stable@kernel.org
Tested-by: Roman Kisel <romank@linux.microsoft.com>
Reviewed-by: Roman Kisel <romank@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Long Li <longli@microsoft.com>
Link: https://lore.kernel.org/r/1737601642-7759-1-git-send-email-longli@linuxonhyperv.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
devm_blk_crypto_profile_init() registers a cleanup handler to run when
the associated (platform-) device is being released. For UFS, the
crypto private data and pointers are stored as part of the ufs_hba's
data structure 'struct ufs_hba::crypto_profile'. This structure is
allocated as part of the underlying ufshcd and therefore Scsi_host
allocation.
During driver release or during error handling in ufshcd_pltfrm_init(),
this structure is released as part of ufshcd_dealloc_host() before the
(platform-) device associated with the crypto call above is released.
Once this device is released, the crypto cleanup code will run, using
the just-released 'struct ufs_hba::crypto_profile'. This causes a
use-after-free situation:
Call trace:
kfree+0x60/0x2d8 (P)
kvfree+0x44/0x60
blk_crypto_profile_destroy_callback+0x28/0x70
devm_action_release+0x1c/0x30
release_nodes+0x6c/0x108
devres_release_all+0x98/0x100
device_unbind_cleanup+0x20/0x70
really_probe+0x218/0x2d0
In other words, the initialisation code flow is:
platform-device probe
ufshcd_pltfrm_init()
ufshcd_alloc_host()
scsi_host_alloc()
allocation of struct ufs_hba
creation of scsi-host devices
devm_blk_crypto_profile_init()
devm registration of cleanup handler using platform-device
and during error handling of ufshcd_pltfrm_init() or during driver
removal:
ufshcd_dealloc_host()
scsi_host_put()
put_device(scsi-host)
release of struct ufs_hba
put_device(platform-device)
crypto cleanup handler
To fix this use-after free, change ufshcd_alloc_host() to register a
devres action to automatically cleanup the underlying SCSI device on
ufshcd destruction, without requiring explicit calls to
ufshcd_dealloc_host(). This way:
* the crypto profile and all other ufs_hba-owned resources are
destroyed before SCSI (as they've been registered after)
* a memleak is plugged in tc-dwc-g210-pci.c remove() as a
side-effect
* EXPORT_SYMBOL_GPL(ufshcd_dealloc_host) can be removed fully as
it's not needed anymore
* no future drivers using ufshcd_alloc_host() could ever forget
adding the cleanup
Fixes: cb77cb5abe1f ("blk-crypto: rename blk_keyslot_manager to blk_crypto_profile")
Fixes: d76d9d7d1009 ("scsi: ufs: use devm_blk_ksm_init()")
Cc: stable@vger.kernel.org
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250124-ufshcd-fix-v4-1-c5d0144aae59@linaro.org
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Fail I/Os instead of retry to prevent user space processes from being
blocked on the I/O completion for several minutes.
Retrying I/Os during "depopulation in progress" or "depopulation restore in
progress" results in a continuous retry loop until the depopulation
completes or until the I/O retry loop is aborted due to a timeout by the
scsi_cmd_runtime_exceeced().
Depopulation is slow and can take 24+ hours to complete on 20+ TB HDDs.
Most I/Os in the depopulation retry loop end up taking several minutes
before returning the failure to user space.
Cc: stable@vger.kernel.org # 4.18.x: 2bbeb8d scsi: core: Handle depopulation and restoration in progress
Cc: stable@vger.kernel.org # 4.18.x
Fixes: e37c7d9a0341 ("scsi: core: sanitize++ in progress")
Signed-off-by: Igor Pylypiv <ipylypiv@google.com>
Link: https://lore.kernel.org/r/20250131184408.859579-1-ipylypiv@google.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Filesystems can write to disk from page reclaim with __GFP_FS
set. Marc found a case where scsi_realloc_sdev_budget_map() ends up in
page reclaim with GFP_KERNEL, where it could try to take filesystem
locks again, leading to a deadlock.
WARNING: possible circular locking dependency detected
6.13.0 #1 Not tainted
------------------------------------------------------
kswapd0/70 is trying to acquire lock:
ffff8881025d5d78 (&q->q_usage_counter(io)){++++}-{0:0}, at: blk_mq_submit_bio+0x461/0x6e0
but task is already holding lock:
ffffffff81ef5f40 (fs_reclaim){+.+.}-{0:0}, at: balance_pgdat+0x9f/0x760
The full lockdep splat can be found in Marc's report:
https://lkml.org/lkml/2025/1/24/1101
Avoid the potential deadlock by doing the allocation with GFP_NOIO, which
prevents both filesystem and block layer recursion.
Reported-by: Marc Aurèle La France <tsi@tuyoix.net>
Signed-off-by: Rik van Riel <riel@surriel.com>
Link: https://lore.kernel.org/r/20250129104525.0ae8421e@fangorn
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Newer model R3* Topre Realforce keyboards share an issue with their older
R2 cousins where a report descriptor fixup is needed in order for n-key
rollover to work correctly, otherwise only 6-key rollover is available.
This patch adds some new hardware IDs for the R3S 87-key keyboard and
makes amendments to the existing hid-topre driver in order to change the
correct byte in the new model.
Signed-off-by: Daniel Brackenbury <daniel.brackenbury@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Add device IDs of Panther Lake-H and Panther Lake-P into ishtp support
list.
Signed-off-by: Zhang Lixu <lixu.zhang@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
This commit addresses an issue where clk_gating.state is being toggled in
ufshcd_setup_clocks() even if clock gating is not allowed.
The fix is to add a check for hba->clk_gating.is_initialized before toggling
clk_gating.state in ufshcd_setup_clocks().
Since clk_gating.lock is now initialized unconditionally, it can no longer
lead to the spinlock being used before it is properly initialized, but
instead it is mostly for documentation purposes.
Fixes: 1ab27c9cf8b6 ("ufs: Add support for clock gating")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Link: https://lore.kernel.org/r/20250128071207.75494-3-avri.altman@wdc.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Address a lockdep warning triggered by the use of the clk_gating.lock before
it is properly initialized. The warning is as follows:
[ 4.388838] INFO: trying to register non-static key.
[ 4.395673] The code is fine but needs lockdep annotation, or maybe
[ 4.402118] you didn't initialize this object before use?
[ 4.407673] turning off the locking correctness validator.
[ 4.413334] CPU: 5 UID: 0 PID: 58 Comm: kworker/u32:1 Not tainted 6.12-rc1 #185
[ 4.413343] Hardware name: Qualcomm Technologies, Inc. Robotics RB5 (DT)
[ 4.413362] Call trace:
[ 4.413364] show_stack+0x18/0x24 (C)
[ 4.413374] dump_stack_lvl+0x90/0xd0
[ 4.413384] dump_stack+0x18/0x24
[ 4.413392] register_lock_class+0x498/0x4a8
[ 4.413400] __lock_acquire+0xb4/0x1b90
[ 4.413406] lock_acquire+0x114/0x310
[ 4.413413] _raw_spin_lock_irqsave+0x60/0x88
[ 4.413423] ufshcd_setup_clocks+0x2c0/0x490
[ 4.413433] ufshcd_init+0x198/0x10ec
[ 4.413437] ufshcd_pltfrm_init+0x600/0x7c0
[ 4.413444] ufs_qcom_probe+0x20/0x58
[ 4.413449] platform_probe+0x68/0xd8
[ 4.413459] really_probe+0xbc/0x268
[ 4.413466] __driver_probe_device+0x78/0x12c
[ 4.413473] driver_probe_device+0x40/0x11c
[ 4.413481] __device_attach_driver+0xb8/0xf8
[ 4.413489] bus_for_each_drv+0x84/0xe4
[ 4.413495] __device_attach+0xfc/0x18c
[ 4.413502] device_initial_probe+0x14/0x20
[ 4.413510] bus_probe_device+0xb0/0xb4
[ 4.413517] deferred_probe_work_func+0x8c/0xc8
[ 4.413524] process_scheduled_works+0x250/0x658
[ 4.413534] worker_thread+0x15c/0x2c8
[ 4.413542] kthread+0x134/0x200
[ 4.413550] ret_from_fork+0x10/0x20
To fix this issue, ensure that the spinlock is only used after it has been
properly initialized before using it in ufshcd_setup_clocks(). Do that
unconditionally as initializing a spinlock is a fast operation.
Fixes: 209f4e43b806 ("scsi: ufs: core: Introduce a new clock_gating lock")
Reported-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Link: https://lore.kernel.org/r/20250128071207.75494-2-avri.altman@wdc.com
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
max_remote_tiles is more related to the platform than the GT IP. Thus
move it to platform descriptor from graphics descriptor. Note that the
FIXME is no more required, thus it can be dropped.
v2: Rebase
v3: Change the position of comment (MattR)
Signed-off-by: Sai Teja Pottumuttu <sai.teja.pottumuttu@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250130085804.4136497-3-sai.teja.pottumuttu@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
|
dma_mask_size is more related to the platform than the GT IP. Thus
move it to platform descriptors.
v2:
- Rebase
Signed-off-by: Sai Teja Pottumuttu <sai.teja.pottumuttu@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250130085804.4136497-2-sai.teja.pottumuttu@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
|
devm_kasprintf() can return a NULL pointer on failure,but this
returned value in mt_input_configured() is not checked.
Add NULL check in mt_input_configured(), to handle kernel NULL
pointer dereference error.
Fixes: 479439463529 ("HID: multitouch: Correct devm device reference for hidinput input_dev name")
Signed-off-by: Charles Han <hanchunchao@inspur.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
devm_kasprintf() can return a NULL pointer on failure,but this
returned value in winwing_init_led() is not checked.
Add NULL check in winwing_init_led(), to handle kernel NULL
pointer dereference error.
Fixes: 266c990debad ("HID: Add WinWing Orion2 throttle support")
Signed-off-by: Charles Han <hanchunchao@inspur.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Pull d_revalidate fix from Al Viro:
"Fix a braino in d_revalidate series: check ->d_op for NULL"
* tag 'pull-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fix braino in "9p: fix ->rename_sem exclusion"
|
|
Pull outstanding fixes bound for this release into 6.14/scsi-fixes.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Jakub Kicinski says:
====================
MAINTAINERS: recognize Kuniyuki Iwashima as a maintainer
Kuniyuki Iwashima has been a prolific contributor and trusted reviewer
for some core portions of the networking stack for a couple of years now.
Formalize some obvious areas of his expertise and list him as a maintainer.
====================
Link: https://patch.msgid.link/20250202014728.1005003-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a MAINTAINERS entry for UNIX socket, Kuniyuki has been
the de-facto maintainer of this code for a while.
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250202014728.1005003-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Create a MAINTAINERS entry for BSD sockets. List the top 3
reviewers as maintainers. The entry is meant to cover core
socket code (of which there isn't much) but also reviews
of any new socket families.
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250202014728.1005003-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
List Kuniyuki as an official TCP reviewer.
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250202014728.1005003-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Submissions to the docs seem to not get properly CCed.
Acked-by: Ilya Maximets <i.maximets@ovn.org>
Link: https://patch.msgid.link/20250202005024.964262-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
ice: fix Rx data path for heavy 9k MTU traffic
Maciej Fijalkowski says:
This patchset fixes a pretty nasty issue that was reported by RedHat
folks which occurred after ~30 minutes (this value varied, just trying
here to state that it was not observed immediately but rather after a
considerable longer amount of time) when ice driver was tortured with
jumbo frames via mix of iperf traffic executed simultaneously with
wrk/nginx on client/server sides (HTTP and TCP workloads basically).
The reported splats were spanning across all the bad things that can
happen to the state of page - refcount underflow, use-after-free, etc.
One of these looked as follows:
[ 2084.019891] BUG: Bad page state in process swapper/34 pfn:97fcd0
[ 2084.025990] page:00000000a60ee772 refcount:-1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x97fcd0
[ 2084.035462] flags: 0x17ffffc0000000(node=0|zone=2|lastcpupid=0x1fffff)
[ 2084.041990] raw: 0017ffffc0000000 dead000000000100 dead000000000122 0000000000000000
[ 2084.049730] raw: 0000000000000000 0000000000000000 ffffffffffffffff 0000000000000000
[ 2084.057468] page dumped because: nonzero _refcount
[ 2084.062260] Modules linked in: bonding tls sunrpc intel_rapl_msr intel_rapl_common intel_uncore_frequency intel_uncore_frequency_common i10nm_edac nfit libnvdimm x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm mgag200 irqd
[ 2084.137829] CPU: 34 PID: 0 Comm: swapper/34 Kdump: loaded Not tainted 5.14.0-427.37.1.el9_4.x86_64 #1
[ 2084.147039] Hardware name: Dell Inc. PowerEdge R750/0216NK, BIOS 1.13.2 12/19/2023
[ 2084.154604] Call Trace:
[ 2084.157058] <IRQ>
[ 2084.159080] dump_stack_lvl+0x34/0x48
[ 2084.162752] bad_page.cold+0x63/0x94
[ 2084.166333] check_new_pages+0xb3/0xe0
[ 2084.170083] rmqueue_bulk+0x2d2/0x9e0
[ 2084.173749] ? ktime_get+0x35/0xa0
[ 2084.177159] rmqueue_pcplist+0x13b/0x210
[ 2084.181081] rmqueue+0x7d3/0xd40
[ 2084.184316] ? xas_load+0x9/0xa0
[ 2084.187547] ? xas_find+0x183/0x1d0
[ 2084.191041] ? xa_find_after+0xd0/0x130
[ 2084.194879] ? intel_iommu_iotlb_sync_map+0x89/0xe0
[ 2084.199759] get_page_from_freelist+0x11f/0x530
[ 2084.204291] __alloc_pages+0xf2/0x250
[ 2084.207958] ice_alloc_rx_bufs+0xcc/0x1c0 [ice]
[ 2084.212543] ice_clean_rx_irq+0x631/0xa20 [ice]
[ 2084.217111] ice_napi_poll+0xdf/0x2a0 [ice]
[ 2084.221330] __napi_poll+0x27/0x170
[ 2084.224824] net_rx_action+0x233/0x2f0
[ 2084.228575] __do_softirq+0xc7/0x2ac
[ 2084.232155] __irq_exit_rcu+0xa1/0xc0
[ 2084.235821] common_interrupt+0x80/0xa0
[ 2084.239662] </IRQ>
[ 2084.241768] <TASK>
The fix is mostly about reverting what was done in commit 1dc1a7e7f410
("ice: Centrallize Rx buffer recycling") followed by proper timing on
page_count() storage and then removing the ice_rx_buf::act related logic
(which was mostly introduced for purposes from cited commit).
Special thanks to Xu Du for providing reproducer and Jacob Keller for
initial extensive analysis.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
ice: stop storing XDP verdict within ice_rx_buf
ice: gather page_count()'s of each frag right before XDP prog call
ice: put Rx buffers after being done with current frame
====================
Link: https://patch.msgid.link/20250131185415.3741532-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
->d_op can bloody well be NULL
Fucked-up-by: Al Viro <viro@zeniv.linux.org.uk>
Fixes: 30d61efe118c "9p: fix ->rename_sem exclusion"
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Some of the platforms may connect the INT pin via inversion logic
effectively make the triggering to be active-low.
Remove explicit trigger flag to respect the settings from firmware.
Without this change even idling chip produces spurious interrupts
and kernel disables the line in the result:
irq 33: nobody cared (try booting with the "irqpoll" option)
CPU: 0 UID: 0 PID: 125 Comm: irq/33-i2c-INT3 Not tainted 6.12.0-00236-g8b874ed11dae #64
Hardware name: Intel Corp. QUARK/Galileo, BIOS 0x01000900 01/01/2014
...
handlers:
[<86e86bea>] irq_default_primary_handler threaded [<d153e44a>] cy8c95x0_irq_handler [pinctrl_cy8c95x0]
Disabling IRQ #33
Fixes: e6cbbe42944d ("pinctrl: Add Cypress cy8c95x0 support")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/20250117142304.596106-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Now that are the pieces are there, we can turn the feature on.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250129174140.948829-14-daniele.ceraolospurio@intel.com
|
|
This patch introduces 2 PXP debugfs entries:
- info: prints the current PXP status and key instance
- terminate: simulate a termination interrupt
The first one is useful for debug, while the second one can be used for
testing the termination flow.
v2: move the info prints inside the lock (John)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250129174140.948829-13-daniele.ceraolospurio@intel.com
|
|
The HW suspend flow kills all PXP HWDRM sessions, so we need to mark all
the queues and BOs as invalid and do a full termination when PXP is next
used.
v2: rebase
v3: rebase on new status flow, defer termination to next PXP use as it
makes things much easier and allows us to use the same function for all
types of suspend.
v4: fix the documentation of the suspend function (John)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250129174140.948829-12-daniele.ceraolospurio@intel.com
|
|
The driver needs to know if a BO is encrypted with PXP to enable the
display decryption at flip time.
Furthermore, we want to keep track of the status of the encryption and
reject any operation that involves a BO that is encrypted using an old
key. There are two points in time where such checks can kick in:
1 - at VM bind time, all operations except for unmapping will be
rejected if the key used to encrypt the BO is no longer valid. This
check is opt-in via a new VM_BIND flag, to avoid a scenario where a
malicious app purposely shares an invalid BO with a non-PXP aware
app (such as a compositor). If the VM_BIND was failed, the
compositor would be unable to display anything at all. Allowing the
bind to go through means that output still works, it just displays
garbage data within the bounds of the illegal BO.
2 - at job submission time, if the queue is marked as using PXP, all
objects bound to the VM will be checked and the submission will be
rejected if any of them was encrypted with a key that is no longer
valid.
Note that there is no risk of leaking the encrypted data if a user does
not opt-in to those checks; the only consequence is that the user will
not realize that the encryption key is changed and that the data is no
longer valid.
v2: Better commnnts and descriptions (John), rebase
v3: Properly return the result of key_assign up the stack, do not use
xe_bo in display headers (Jani)
v4: improve key_instance variable documentation (John)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250129174140.948829-11-daniele.ceraolospurio@intel.com
|
|
PXP prerequisites (SW proxy and HuC auth via GSC) are completed
asynchronously from driver load, which means that userspace can start
submitting before we're ready to start a PXP session. Therefore, we need
a query that userspace can use to check not only if PXP is supported but
also to wait until the prerequisites are done.
v2: Improve doc, do not report TYPE_NONE as supported (José)
v3: Better comments, remove unneeded copy_from_user (John)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250129174140.948829-10-daniele.ceraolospurio@intel.com
|
|
Userspace is required to mark a queue as using PXP to guarantee that the
PXP instructions will work. In addition to managing the PXP sessions,
when a PXP queue is created the driver will set the relevant bits in
its context control register.
On submission of a valid PXP queue, the driver will validate all
encrypted objects mapped to the VM to ensured they were encrypted with
the current key.
v2: Remove pxp_types include outside of PXP code (Jani), better comments
and code cleanup (John)
v3: split the internal PXP management to a separate patch for ease of
review. re-order ioctl checks to always return -EINVAL if parameters are
invalid, rebase on msix changes.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250129174140.948829-9-daniele.ceraolospurio@intel.com
|
|
We expect every queue that uses PXP to be marked as doing so, to allow
the driver to correctly manage the encryption status. The API for doing
this from userspace is coming in the next patch, while this patch
implement the management side of things. When a PXP queue is created,
the driver will do the following:
- Start the default PXP session if it is not already running;
- assign an rpm ref to the queue to keep for its lifetime (this is
required because PXP HWDRM sessions are killed by the HW suspend flow).
Since PXP start and termination can race each other, this patch also
introduces locking and a state machine to keep track of the pending
operations. Note that since we'll need to take the lock from the
suspend/resume paths as well, we can't do submissions while holding it,
which means we need a slightly more complicated state machine to keep
track of intermediate steps.
v4: new patch in the series, split from the following interface patch to
keep review manageable. Lock and status rework to not do submissions
under lock.
v5: Improve comments and error logs (John)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250129174140.948829-8-daniele.ceraolospurio@intel.com
|
|
A session is initialized (i.e. started) by sending a message to the GSC.
The initialization will be triggered when a user opts-in to using PXP;
the interface for that is coming in a follow-up patch in the series.
v2: clean up error messages, use new ARB define (John)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250129174140.948829-7-daniele.ceraolospurio@intel.com
|
|
When something happen to the session, the HW generates a termination
interrupt. In reply to this, the driver is required to submit an inline
session termination via the VCS, trigger the global termination and
notify the GSC FW that the session is now invalid.
v2: rename ARB define to make it cleaner to move it to uapi (John)
v3: fix parameter name in documentation
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250129174140.948829-6-daniele.ceraolospurio@intel.com
|
|
After a session is terminated, we need to inform the GSC so that it can
clean up its side of the allocation. This is done by sending an
invalidation command with the session ID.
The invalidation will be triggered in response to a termination,
interrupt, whose handling is coming in the next patch in the series.
v2: Better comment and error messages (John)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250129174140.948829-5-daniele.ceraolospurio@intel.com
|
|
The key termination is done with a specific submission to the VCS
engine. This flow will be triggered in response to a termination
interrupt, whose handling is coming in a follow-up patch in the series.
v2: clean up defines and command emission code. (John)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250129174140.948829-4-daniele.ceraolospurio@intel.com
|
|
PXP requires submissions to the HW for the following operations
1) Key invalidation, done via the VCS engine
2) Communication with the GSC FW for session management, done via the
GSCCS.
Key invalidation submissions are serialized (only 1 termination can be
serviced at a given time) and done via GGTT, so we can allocate a simple
BO and a kernel queue for it.
Submissions for session management are tied to a PXP client (identified
by a unique host_session_id); from the GSC POV this is a user-accessible
construct, so all related submission must be done via PPGTT. The driver
does not currently support PPGTT submission from within the kernel, so
to add this support, the following changes have been included:
- a new type of kernel-owned VM (marked as GSC), required to ensure we
don't use fault mode on the engine and to mark the different lock
usage with lockdep.
- a new function to map a BO into a VM from within the kernel.
v2: improve comments and function name, remove unneeded include (John)
v3: fix variable/function names in documentation
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250129174140.948829-3-daniele.ceraolospurio@intel.com
|
|
As the first step towards adding PXP support, hook in the PXP init
function, allocate the PXP structure and initialize the KCR register to
allow PXP HWDRM sessions.
v2: remove unneeded includes, free PXP memory on error (John)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250129174140.948829-2-daniele.ceraolospurio@intel.com
|
|
Fix incorrect format of compatible string (comma instead of hyphen) for
TI's AM62A7 SoC.
s/ti,am62a7,dss/ti,am62a7-dss
Fixes: 7959ceb767e4 ("dt-bindings: display: ti: Add support for am62a7 dss")
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Devarsh Thakkar <devarsht@ti.com>
Link: https://lore.kernel.org/r/20250203155431.2174170-1-devarsht@ti.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Commit 70fb86a85dc9 ("drm/xe: Revert some changes that break a mesa
debug tool") partially reverted some changes to workaround breakage
caused to mesa tools. However, in doing so it also broke fetching the
GuC log via debugfs since xe_print_blob_ascii85() simply bails out.
The fix is to avoid the extra newlines: the devcoredump interface is
line-oriented and adding random newlines in the middle breaks it. If a
tool is able to parse it by looking at the data and checking for chars
that are out of the ascii85 space, it can still do so. A format change
that breaks the line-oriented output on devcoredump however needs better
coordination with existing tools.
v2: Add suffix description comment
v3: Reword explanation of xe_print_blob_ascii85() calling drm_puts()
in a loop
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Julia Filipchuk <julia.filipchuk@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: stable@vger.kernel.org
Fixes: 70fb86a85dc9 ("drm/xe: Revert some changes that break a mesa debug tool")
Fixes: ec1455ce7e35 ("drm/xe/devcoredump: Add ASCII85 dump helper function")
Link: https://patchwork.freedesktop.org/patch/msgid/20250123202307.95103-2-jose.souza@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 2c95bbf5002776117a69caed3b31c10bf7341bec)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Having the exec queue snapshot inside a "GuC CT" section was always
wrong. Commit c28fd6c358db ("drm/xe/devcoredump: Improve section
headings and add tile info") tried to fix that bug, but with that also
broke the mesa tool that parses the devcoredump, hence it was reverted
in commit a53da2fb25a3 ("drm/xe: Revert some changes that break a mesa
debug tool").
With the mesa tool also fixed, this can propagate as a fix on both
kernel and userspace side to avoid unnecessary headache for a debug
feature.
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Julia Filipchuk <julia.filipchuk@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: stable@vger.kernel.org
Fixes: a53da2fb25a3 ("drm/xe: Revert some changes that break a mesa debug tool")
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250123051112.1938193-2-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit a37934ea75d331fafa7fe80b6180642ba5193422)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
We rely on stream->pollin to decide whether or not to block during
poll/read calls. However, currently there are blocking read code paths
which don't even set stream->pollin. The best place to consistently set
stream->pollin for all code paths is therefore to set it in
xe_oa_buffer_check_unlocked.
Fixes: e936f885f1e9 ("drm/xe/oa/uapi: Expose OA stream fd")
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250115222029.3002103-1-ashutosh.dixit@intel.com
(cherry picked from commit d3fedff828bb7e4a422c42caeafd5d974e24ee43)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
The migration support only needs to be initialized once, but it
was incorrectly called from the xe_gt_sriov_pf_init_hw(), which
is part of the reset flow and may be called multiple times.
Fixes: d86e3737c7ab ("drm/xe/pf: Add functions to save and restore VF GuC state")
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250120232443.544-1-michal.wajdeczko@intel.com
(cherry picked from commit 9ebb5846e1a3b1705f8a7cbc528888a1aa0b163e)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
UMD's have interest in setting unused bits of the oa_ctrl register "out of
band" for certain experiments. To facilitate this, don't clobber previous
oa_ctrl unused bits, i.e. rmw the values rather than simply write them.
Fixes: e936f885f1e9 ("drm/xe/oa/uapi: Expose OA stream fd")
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250117032155.3048063-1-ashutosh.dixit@intel.com
(cherry picked from commit cfa9d40db8c30d894171010fe765d96e9bc6a47e)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
[WHY]
When the system powers up eDP with external monitors in seamless boot
sequence, stutter get enabled before TTU and HUBP registers being
programmed, which resulting in underflow.
[HOW]
Enable TTU in hubp_init.
Change the sequence that do not perpare_bandwidth and optimize_bandwidth
while having seamless boot streams.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Lo-an Chen <lo-an.chen@amd.com>
Signed-off-by: Paul Hsieh <paul.hsieh@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHAT & HOW]
hpo_stream_to_link_encoder_mapping has size MAX_HPO_DP2_ENCODERS(=4),
but location can have size up to 6. As a result, it is necessary to
check location against MAX_HPO_DP2_ENCODERS.
Similiarly, disp_cfg_stream_location can be used as an array index which
should be 0..5, so the ASSERT's conditions should be less without equal.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3904
Reviewed-by: Austin Zheng <Austin.Zheng@amd.com>
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Vulkan can't support DCC and Z/S compression on GFX12 without
WRITE_COMPRESS_DISABLE in this commit or a completely different DCC
interface.
AMDGPU_TILING_GFX12_SCANOUT is added because it's already used by userspace.
Cc: stable@vger.kernel.org # 6.12.x
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
